Reddit mentions: The best cb radio antennas
We found 8 Reddit comments discussing the best cb radio antennas. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 5 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. EVO JK CB Antenna Mount (Driver Side)
- Offers a 9/16" mounting hole for mounting CB antenna, race radio antenna, or trail flags
- Works with factory tire carrier, and factory tailgate
- No drilling required / bolt on installation
- Powdercoated Black
Features:
Specs:
| Height | 4 Inches |
| Length | 7 Inches |
| Width | 3 Inches |
2. RoadPro RPPS-14KB Platinum Series Black 4' Single Mirror Mount CB Antenna Kit
16 gauge copper wire for handling 1000 wattsComputer measured copper wire for maximum output and receptionHermetically sealed coax cable for extra protectionUV protected anti-static PVC jacket100 percent non-corrosive clear anodized mounts with stainless steel hardware
Specs:
| Color | Black |
| Height | 2 Inches |
| Length | 49.63 Inches |
| Number of items | 1 |
| Release date | October 2013 |
| Size | 4 Foot |
| Weight | 1.84 Pounds |
| Width | 5 Inches |
3. Wilson 305-610 Heavy Duty Stainless Steel CB Antenna Stud
- Made of heavy-duty stainless steel
- Compatible with Wilson 305-610 antenna
- Designed for roof & other flat surface applications
- Perfect replacement stud for larger antenna applications
Features:
Specs:
| Height | 6 Inches |
| Length | 6 Inches |
| Number of items | 1 |
| Release date | May 2014 |
| Weight | 0.4375 Pounds |
| Width | 6 Inches |
4. RoadPro RP-2500S 54" 1000-Watt Air Cooled Helical Coil Center Loaded CB Antenna
1000 Watt power ratingStainless steelAir-cooled high-tech helical design
Specs:
| Color | Stain Steel |
| Height | 49 Inches |
| Length | 2.25 Inches |
| Number of items | 1 |
| Weight | 1.65 Pounds |
| Width | 5 Inches |
5. K40 Antenna, Tunable, 49inH, Single Band
Auto & Truck MaintenanceCountry of manufacture: United StatesManufacturer: K40
Specs:
| Color | Black |
| Height | 0.8 Inches |
| Length | 52 Inches |
| Number of items | 1 |
| Width | 3.1 Inches |
🎓 Reddit experts on cb radio antennas
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where cb radio antennas are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Interested in what Redditors like? Check out our Shuffle feature
Shuffle: random products popular on RedditTop Reddit comments about Heavy Duty Fleet Navigation & Communication Supplies:
Summary
1. EVO JK CB Antenna Mount (Driver Side)
- Offers a 9/16" mounting hole for mounting CB antenna, race radio antenna, or trail flags
- Works with factory tire carrier, and factory tailgate
- No drilling required / bolt on installation
- Powdercoated Black
Features:
Specs:
| Height | 4 Inches |
| Length | 7 Inches |
| Width | 3 Inches |
2. RoadPro RPPS-14KB Platinum Series Black 4' Single Mirror Mount CB Antenna Kit
16 gauge copper wire for handling 1000 wattsComputer measured copper wire for maximum output and receptionHermetically sealed coax cable for extra protectionUV protected anti-static PVC jacket100 percent non-corrosive clear anodized mounts with stainless steel hardware
Specs:
| Color | Black |
| Height | 2 Inches |
| Length | 49.63 Inches |
| Number of items | 1 |
| Release date | October 2013 |
| Size | 4 Foot |
| Weight | 1.84 Pounds |
| Width | 5 Inches |
3. Wilson 305-610 Heavy Duty Stainless Steel CB Antenna Stud
- Made of heavy-duty stainless steel
- Compatible with Wilson 305-610 antenna
- Designed for roof & other flat surface applications
- Perfect replacement stud for larger antenna applications
Features:
Specs:
| Height | 6 Inches |
| Length | 6 Inches |
| Number of items | 1 |
| Release date | May 2014 |
| Weight | 0.4375 Pounds |
| Width | 6 Inches |
4. RoadPro RP-2500S 54" 1000-Watt Air Cooled Helical Coil Center Loaded CB Antenna
1000 Watt power ratingStainless steelAir-cooled high-tech helical design
Specs:
| Color | Stain Steel |
| Height | 49 Inches |
| Length | 2.25 Inches |
| Number of items | 1 |
| Weight | 1.65 Pounds |
| Width | 5 Inches |
5. K40 Antenna, Tunable, 49inH, Single Band
Auto & Truck MaintenanceCountry of manufacture: United StatesManufacturer: K40
Specs:
| Color | Black |
| Height | 0.8 Inches |
| Length | 52 Inches |
| Number of items | 1 |
| Width | 3.1 Inches |
I paid a bit more for my setup, just because I really wanted it to have a certain look and feel. Here's what I'm running in my JK.
Cobra 75WXST - $85
Fire-Flex coax - $20
Spare Tire Mount - $20
Firestik Stud - $8
3ft Firestik - $20
Microphone Mount - $30
The setup is really unobtrusive and I think it looks nice, but everyone is going to have their own opinions on aesthetics. Seriously though, shop around for a bit before committing. There's a zillion combinations of radios, antenna lengths, antenna types, mounting locations, etc to think about. My mounting location (spare tire), for example, is not ideal when it comes to signal propagation. A hood mount would be much better.
Thank you!
I am looking on amazon right now, would you suggest this one?
http://www.amazon.com/gp/aw/d/B001JT0MJA/ref=mp_s_a_1_12?qid=1394057030&sr=8-12&pi=AC_SX110_SY165_QL70
Its actually a CB antenna made by a company called K40
https://www.amazon.com/K40-TR-40BK-Center-Trucker-Antenna/dp/B001JSYA5S?crid=3M48AVZQF90IK&keywords=k40+cb+antenna&qid=1540769716&sprefix=k40+%2Caps%2C203&sr=8-4&ref=sr_1_4
It's a center loaded CB Antenna
There are stud mounts that are PL-259 based. Wilson makes one.
Wilson 305-610 Heavy Duty Stainless Steel CB Antenna Stud https://www.amazon.com/dp/B007VA8BAS/ref=cm_sw_r_cp_apa_8ZrZBb0A8JTS5