Reddit mentions: The best adjustable wrenches
We found 234 Reddit comments discussing the best adjustable wrenches. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 126 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Stanley 87-369 8-Inch Adjustable Wrench
- Adjustable wrench meets or exceeds ANSI specifications
- Rust resistant polished chrome finish
- Handle hole for tethering, hanging or storage
Features:
Specs:
Color | Multi |
Height | 0.6 Inches |
Length | 10 Inches |
Number of items | 1 |
Size | One Size |
Weight | 0.3 Pounds |
Width | 3.3 Inches |
2. Stanley 85-610 10-Inch Long MaxGrip Locking Adjustable Wrench
- 2 tools in 1: a traditional adjustable wrench and locking pliers
- Exceeds ANSI standards for torque
- Forged alloy-steel body
- Stanley limited lifetime warranty
- Applications: maintenance and automotive repair, plumbing, general assembly tasks
Features:
Specs:
Color | One Color |
Height | 0.79 Inches |
Length | 11.42 Inches |
Number of items | 1 |
Size | EA |
Weight | 1.4 Pounds |
Width | 3.8 Inches |
3. Channellock 8WCB 8-Inch WideAzz Adjustable Wrench | 1.5-Inch Wide Jaw Opening | Precise Jaw Design Grips Tight - Even in Tight Spaces | Measurement Scales Engraved on the Tool for Easy Sizing of Diameters | CODE BLUE Comfort Grip
- Extra Wide opening to 1-1/2"
- Longer jaws grip better, Thinner jaws give greater access in tight spaces.
- 4 thread knurl and non-protruding jaws provide greater capacity; minimal head width improved performance in confined spaces
- Precise jaw design grips tight the first time, every time
- Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters
- Chrome Vanadium steel construction
- Code Blue grips are designed for durability and comfort
Features:
Specs:
Color | Factory |
Height | 12.2 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | 8-Inch WideAzz |
Weight | 0.75 Pounds |
Width | 4 Inches |
4. TEKTON 23002 6-Inch Adjustable Wrench
Drop forged and heat-treated carbon steel construction with a corrosion-resistant satin chrome plated finishPrecision-machined slide jaw and worm gear allows for exact fastener fit and smooth adjustmentQuick fit jaw opening guide with permanent laser-etched size markings in 1/16 in. And 1mm incremen...
Specs:
Height | 0.5 Inches |
Length | 6 Inches |
Number of items | 1 |
Size | 6 inch |
Weight | 0.26 Pounds |
Width | 1.8 Inches |
5. Superior Tool 03811 Eleven Inch Basin Wrench-Infinitely Adjustable 11" Spring Loaded Basin Wrench
Ideal for use in tight spacesInfinitely adjustable head angleCan accommodate up to 1” hex and square nuts
Specs:
Color | Chrome |
Height | 1 Inches |
Length | 13 Inches |
Number of items | 1 |
Weight | 1 Pounds |
Width | 6 Inches |
6. Stanley 90-947 6-Inch MaxSteel Adjustable Wrench
- Tapered jaw design of the adjustable wrench allows for work in limited space applications
- Slip-resistant bi-material handle for a comfortable grip
- Wide-capacity jaw accepts a wide range of fastener sizes
- Knurl adjusting mechanism for quick and precise adjustment
- Laser-etched SAE and mm jaw scale for easy size adjustment
- Built-in tension spring stabilizes movable jaw
- Meets ANSI specifications
Features:
Specs:
Color | Yellow |
Height | 0.7 Inches |
Length | 8.2 Inches |
Number of items | 1 |
Weight | 0.28 Pounds |
Width | 3.3 Inches |
7. Craftsman Oil Filter Wrench, Auto-Adjustable
Get your oil filter changed quickly and easily every time;Adjusts to grip and remove oil filters ranging in size from 2.5 to 4.75 inches (62 mm to 121 mm);;Use your 3/8 inch square driver ratchet or your 3/4 inch wrench to turn the oil filter wrench effortlessly;Automatically tightens allowing you t...
Specs:
Color | Black |
Height | 2 Inches |
Length | 6.3 Inches |
Weight | 0.75 Pounds |
Width | 5.1 Inches |
8. Crescent ATR28 8-Inch Ratcheting Adjustable Wrench, Red/Black
- Moveable jaw works on any 4 or 6 point fastener up to 15/16-Inch
- Smooth ratcheting action is intuitive and easy to use
- Unique handle design accomodates a wide variety of hand sizes and shapes
- Ratcheting on/off switch allows wrench to also be used as a traditional adjustable wrench
- Handle size and shape promotes proper use of tool
Features:
Specs:
Color | Red/Black |
Height | 1.18 inches |
Length | 10.43 inches |
Number of items | 1 |
Weight | 0.22 Pounds |
Width | 2.95 inches |
9. Titan 21315 12-Inch Strap Wrench
Overall length: 12-Inches | strap width: 1.05-Inches | strap length: 34-InchesTube capacity: 9-Inches | pipe capacity: 2-InchesWorks in tight confined areas and is ideal for use on any polished pipe and can be used on plastic or metal pipes, fittings, filters, shafts, and irregular shapesFeatures a ...
Specs:
Color | Factory |
Height | 14.2 Inches |
Length | 1.3 Inches |
Number of items | 1 |
Release date | February 2015 |
Size | 12" Handle |
Weight | 0.7 Pounds |
Width | 2.7 Inches |
10. Oil Filter Wrench Set - 2pcs, Use as Jar Opener, Pipe Wrench, Rubber Strap Wrenches Used by Mechanics, Plumbers
- ✔️️Can Be Used On - Automobiles, Tractors, Oil Filters, Glue Joints, Shower Heads, Fuel Filters, Jar Openers, PVC Junctions, Bottles, Faucets, Water Filters, Sinks, Taps and Many More Objects
- ✔️️The smaller wrench is great for removing nuts, bolts, caps etc that you can't get off, even when it seems the Hulk has put them on
- ✔️️Large Wrench is adjustable up to 150mm/6" diameter, Smaller Wrench is adjustable up to 100mm/4’’ diameter
- ✔️️Perfect for Arthritic Hands, Weak Wrists, Plumbers, Mechanics, Craftsman and More
- ✔️️GET THE JOB DONE RIGHT, THE FIRST TIME… We know your time, energy and creativity are valuable and we promise that our tools will increase the efficiency of your projects. If you are not 100% satisfied with the performance of our tools, we will give you a full refund, no questions asked. Order yours now, risk-free, and experience the “Tuffman Difference.”
Features:
Specs:
Height | 3.93700787 Inches |
Length | 11.81102361 Inches |
Width | 1.181102361 Inches |
11. Wolverine PST151 Basin Wrench
- Basin wrench
- 10-Inch arm length
- Carded
Features:
Specs:
Color | Silver |
Height | 14.31 Inches |
Length | 0.75 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 1 Pounds |
Width | 3.75 Inches |
12. Performance Tool W54059 3/8" to 6-1/2" 2-Piece Strap Wrench Set
Durable non slip rubber strap for industrial strengthFlexible strap fits any shape and works easily in confined areasVersatile usage on automobiles, tractors, home applications2 Tone color handle with PVC coating for extra controlFits items from 3/8-Inch to 6 1/2-Inch diameter
Specs:
Height | 4.5 Inches |
Length | 51 Inches |
Number of items | 1 |
Size | 2pc Adj Wrench | 3/8" to 6-1/2" |
Weight | 0.8 Pounds |
Width | 7.5 Inches |
13. Crescent Adjustable Wrench 4 Inch
Alloy steel and heated treated with a chrome plated finish that resists rust and corrosion.Polished head and regular, satin finished handle.Proportioned dimensions for greatest strength and minimum weight.Tension spring stabilizes jaw and knurl adjusts easily4" long, 1/2" jaw opening
Specs:
Height | 0.5 Inches |
Length | 4 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.03 Pounds |
Width | 1 Inches |
14. Channellock 6WCB 6-Inch WideAzz Adjustable Wrench, CODE BLUE
- Extra wide opening to 1-3/8"
- Longer jaws grip better, thinner jaws give greater access in tight spaces
- 4 thread knurl & non-protruding jaws provide greater capacity; minimal head width improves performance in confined spaces
- Precise jaw design grips tight the first time, every time
- Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters
- Chrome Vanadium steel construction
- Code Blue grips are designed for durability and comfort
Features:
Specs:
Color | Factory |
Height | 0.41 Inches |
Length | 6.25 Inches |
Number of items | 1 |
Size | 6-Inch WideAzz |
Weight | 0.29 Pounds |
Width | 1.97 Inches |
15. TEKTON 23001 4-Inch Adjustable Wrench
- Drop forged and heat-treated carbon steel construction with a corrosion-resistant satin chrome plated finish
- Precision-machined slide jaw and worm gear allows for exact fastener fit and smooth adjustment
- Quick fit jaw opening guide with permanent laser-etched size markings in 1/16 in. and 1mm increments
- Meets or exceeds ANSI standards
- 1/2 in. jaw capacity
Features:
Specs:
Height | 0.3 Inches |
Length | 4.3 Inches |
Number of items | 1 |
Size | 4 in. |
Weight | 0.11 Pounds |
Width | 1.4 Inches |
16. RIDGID 27023 Model 2002 One Stop Wrench for Angle Stops, Straight Stops and Compression Couplings, Angle Stop Wrench
The RIDGID One Stop Wrench features two wrenches in a single tool making plumbing work quick and easyProvides the exact wrenches you need to install angle stops and compression couplingsCompact design stores smaller wrench inside of the tubular body of the larger angle stop wrench for convenienceInc...
Specs:
Color | 1 |
Height | 0.75 Inches |
Length | 12 Inches |
Number of items | 1 |
Weight | 0.8 pounds |
Width | 4.75 Inches |
17. Superior Tool 03840 Adjustable Combination Wrench
Combination wrenchFits spud nuts, slip and lock nuts and basket strainer nuts for various under sink and toilet workAdjusts from 1 inch to 3 inchZinc plated with cushion grip handle
Specs:
Color | Multi |
Height | 1.15 Inches |
Length | 11.75 Inches |
Number of items | 1 |
Size | One Size |
Weight | 1 Pounds |
Width | 6.5 Inches |
18. Cushion Grip Adjustable Wrench Set (3-Piece)
3 piece durable Adjustable SetCushion Grip ensures long term comfortWide Capacity Jaw Allows Each Tool to Work with Multiple SizesProportioned dimensions for greatest strength and minimum weightHandle Hole ideal for tethering, hanging or storageideal for both the professional or home DYI repair
19. Bahco &Nbsp;Adjustable Spanner Triple Pack Contains 8070&Nbsp;8071&Nbsp;8072 16 Degree Head Angle. Black
Phosphate finish adjustable wrench.Tapered jaws with a measurement scale on the fixed jaw.16 degree head angle.I section handle.80 Series Adjustable Wrench Set 3 Pieces
Specs:
Color | Black |
Height | 3.7795275552 inches |
Length | 2.8346456664 inches |
Number of items | 100 |
Release date | June 2016 |
Size | 16 Degree Head Angle. |
Weight | 1.7416518698 Pounds |
Width | 10.629921249 inches |
20. Bucket Boss Wrench Roll In Brown, 70003
Canvas absorbs tool oil11 assorted pocketsFits 6 mm to 25 mm wrench setsFits ¼ in. to 1 in. wrench setsOpened: 18”L x 17.5”H
Specs:
Color | Brown|brown |
Height | 1 Inches |
Length | 27 Inches |
Number of items | 1 |
Weight | 0.33 Pounds |
Width | 22.5 Inches |
🎓 Reddit experts on adjustable wrenches
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where adjustable wrenches are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
What kind of experience are you guys coming into this with?
Do you have mentors/are you yourselves familiar with the use and safety precautions necessary around power tools?
What kind of space are you in? Do you have a dedicated space to use or do you need to move things in and out of an area every meeting?
How much do you want to learn? Are you planning on using primarily Matrix/Tetrix this season or do you want to do custom fabrication?
If you're planning on using chain, I'd recommend getting at least one of these (Dark Soul #25 chain tool). You won't need to use master links again, and they're just in general great to have around.
I would definitely recommend getting Anderson Powerpole tools and items. Definitely get a TriCrimp and associated wire, connectors, and contacts, if you don't have them already.
I'd also recommend a few tools that come in useful just in general when it comes to FTC-- a good adjustable wrench is good to have around, whether you're doing custom or not. A ratcheting screwdriver is also good to have around, in addition to more standard versions. I'd also recommend my personal favorite allen wrenches (you can get just metric or standard sets, but I linked the paired version). For taking care of stuck bolts or anything else stuck, a good pair of locking pliers are also great. Also getting some good pliers for all your electrical needs is a good idea. Also extremely useful is a good square. On a similar note, a level is good for checking whether you actually bolted that part on straight.
You should also get a general set of combo wrenches and some of the specific sizes most common for FTC. Pretty much any reputable brand is fine for this-- don't spend more than about $50 for a set and $10 for an individual wrench (honestly, that would be super high, you should probably target half of that). A decent ratchet set is also good, but not absolutely essential.
Other good things to have around are a heat gun or heat bar (for doing custom plastic parts for your robot). You can do some great stuff with some creativity and some sheet polycarbonate.
To go with that, a vinyl cutter is great for doing sponsor decals and general cool stuff.
As far as "essentials" go, that depends on where you want to go. If you want to do lots of custom work-- or use something like 80/20, then you'll want some other tools to do that work. A good power drill is absolutely essential, and if you have the space, I'd definitely recommend getting a solid miter saw and an aluminum cutting blade (I know some people consider them too dangerous, but with proper safety training and precautions, I've never had a student or mentor get injured with one).
As far as materials for doing custom work go, I'd recommend getting some box aluminum (1x1 and 1x2) tubing, 1/8" and 1/16" polycarbonate (I'm partial to the dark tinted stuff, but it's a bit more expensive), and a full assortment of #6 and maybe #8 hardware. You'll also want some M3 screws for face mounting AndyMark and REV robotics motors. I like to use Copper State for this, because while they have a totally garbage web ordering system, their prices are great, and their website isn't that bad (to be honest, I'm a bit spoiled by McMaster-Carr).
You probably don't need me to tell you what kind of COTS parts might be good (if that's within the scope of this money). Electronics, good phones (not those stupid ZTEs), motors, are all good.
You'll notice that I'm not suggesting the very budget stuff-- while you can go that direction if you need to, quality tools help you get quality results. If you have the money to get and use the right tools for the job, I always recommend doing that as opposed to cheaping out with something you'll just end up breaking and messing up your robot with later.
A decent chunk of the tools I linked are suggested by my personal favorite review site, The WireCutter/SweetHome. I've used the majority of them, and my experience has been good enough that I don't have an issue recommending their suggestions for other tools relevant to FTC.
Hopefully that was somewhat helpful. I'd definitely consider the answers to the questions at the top-- they can help you narrow down what will actually be useful for you. I can definitely give more specific suggestions if you know what direction you're taking with robot building techniques and how much space you have/ whether you have to move.
The bare essentials:
I have all of these in my basic tool set, and save for major mechanical issues or upgrades, I haven't needed a trip to the shop yet.
Last, but not least, consider picking up a copy of the Big Blue Book or similar comprehensive repair guide. There are plenty of resources available for free on the internet, but I like the BBB because it has pretty pictures and makes for excellent bathroom reading. I also don't feel bad about getting grease on it, like I would with my laptop!
As far as the move is concerned, I would recommend having your LBS package it and ship it to your new LBS for reassembly. They'll pack it correctly, and give it the once over and make sure it's safe to ride once it gets to your new home. You could probably do this on your own, but some things are better left to the professionals.
Here's an old post I had from /r/homeimprovement regarding a new home, hope it helps.
I'm sure there's more, but it's midnight and I'm sleepy.
I'm a big fan of the 6" wide-mouth wrench. I've never found a situation where I need the additional torque of an 8" wrench (with the exception of when someone with an 8" wrench has come by and hamfisted something), and this one is lightweight and the long thin jaws are sometimes extremely convenient for reaching hard-to-reach fasteners. The bright blue grip also makes it easier to find in the dark if you put it down somewhere, those black Bahcos are so easy to misplace. The jaws are pretty sharp, though, so you need to be conscientious about that; they are very precise, though, they keep their spacing very well once set and have relatively little play. I have large hands so I also find the nice fat grip to be more ergonomic than a regular thin C-wrench or a Bahco. On the whole these are very similar to the Bahco wrenches but I definitely like them better, mostly due to the grip, the bright color, and the fact that they are slightly cheaper :)
http://www.amazon.com/Channellock-6WCB-WideAzz-Adjustable-Opening/dp/B0014FGUYU
I'm 28, in the Navy, and here's what I'm usually carrying.
Maxpedition Pocket Organizer
NM Flag patch
Old coin given to me a while ago
Sparrow's Tuxedo Pick Set It's a great set, and a cool thing to learn. The linked set has a different case, I guess they don't do the leather cases anymore. I also had them put rubber handles on mine when I ordered, makes all the difference.
USB cord that came with my phone
Tekton 4" adjustable wrench
Zebra pen. Forgot which specific one...you probably know it though, it's one of the popular choices on this sub. My main pen I keep in my breast pocket, the Fisher Bullet. That's the best pen I've ever had, hands down.
Fine point Sharpie
Rite in the Rain notebook. It's ok. I much prefer Field Notes Expedition which I also keep in mind that breast pocket. Just wish the pages were perforated.
Streamlight Microstream. Awesome little light, and the AAA battery it takes lasts quite a while.
Chapstick
ThermoWorks surface thermometer. Sorry, can't find a link. My buddy gave me this last Christmas. Comes in real handy in the field, to see if my JetBoil is too hot to put away. Also, I dunno, I can tell you if stuff is hot or cold or whatever. Neat.
If you have about $60 you could just buy them and have some tools that will serve you well as a renter and then you could help out your friends (and maybe get free beers or food off them).
I think you mean a stud finder.
https://www.amazon.com/CH-Hanson-03040-Magnetic-Finder/dp/B000IKK0OI/
It's less than ten bucks.
An adjustable wrench is about the same price.
https://www.amazon.com/TEKTON-23002-6-Inch-Adjustable-Wrench/dp/B00FFUPS98/
For a cordless rechargeable you're talking about $40 for this one.
https://www.amazon.com/Cordless-Variable-Position-Masterworks-MW316/dp/B07CR1GPBQ/
I know you said borrow, but if you're renting it's good to have some basic tools for stuff like this and it's an investment to be honest. If you honestly can't get anyone to help, I already have the stud finder (metal detector), and wrench. It would be an excuse for me to finally get a drill. Let me know if nothing else works out.
Here is a tuning kit
> do the weights matter if I get some stage six one or some generic ones
Unless you are racing a decent set (of 6) is probably $10 or you can go fancy and get $15 ones. NCY weights are more like $20 but I'd consider that high end fancy schmancy.
It's worth noting that your weights should be inspected/changed every 1000 or so miles anyway, so if you bought used it would probably be good to go ahead and change them. Here is a very good GY6 service manual too BTW
You will likely also (arguably) need a torque wrench for reassembling the transmission and a clutch holder. If you don't have these you can get by using other methods or a strap wrench
Its worth noting there are also sliders that you can use instead of rollers. If it makes any difference probably has to do with the slope in your variator and the design of the slider. There are many, many different combinations.
I found one source that says:
> "for every .5 grams heavier , it seems as if you loose about 250 rpms or so. Maybe a little less. "
but I cannot say if that is accurate or not.
You might also be able to change your variator to get a little bit more difference as well. As with changing weights its something some people seem to swear by and others say does nothing. Either way companies like NCY make nice parts that may be lighter and generate less/dissapate more heat, last longer, and offer a smoother ride than stock parts. If you go this route you can usually do it one piece at a time.
I'm still pretty new to all this though :-O so by all means if someone sees I said something inaccurate let me know!
Here is my work bench. At this point, I can build and tear down bikes. I just replace a headset yesterday, and I have all the tools, for example. So, it's probably overkill for most other people. There are a few things I cannot do, and it's because the tools are too exotic, like BB86 press fit bearing remover, threading the threaded fork, etc.
I also have Nashbar's crown race installer, remover, headset cup press and remover, and steering tube cutting guide. Head set cup press is rather expensive so unless you are going to service the headset multiple times, it's better to use LBS or bike coop.
Here are several of my favorite special tools made by Ridgid
Amazon This tool is really handy for faucets and drains.
$30 on amazon
Amazon Every one needs a few extra 6 in 1's laying around, may as well get a good one.
$12 on amazon
Amazon This two part wrench is perfect for water stops.
$30 on Amazon
Amazon This is the bees knees for cutting the tubular plastic used for traps and waste lines under sinks and lavs.
$20 on Amazon
You can probably get all of that and be just over the $100 limit with taxes and shipping. I've used all of these in the field and now sell them since i moved to the other side of the parts counter, they make good stuff. Do a Ridgid Tool search on Amazon so you can see if any of there more expensive tools would make sense. Like if he does gas work with copper, they have great flairing tools.
May NOT be condensation.
You are getting good advice from others assuming it is condensation. You told us the SIDE of the toilet where water is accumulating, but you didn't actually say the water was ON the toilet tank. Is the water appearing on the floor and/or on the bowl behind the seat? If so, the connection between the tank and bowl may be failing.
If the connection between the two is with brass screws from inside the tank, using a flat-blade screwdriver from inside the tank and your HAND on the nut below the exterior rim of the bowl, tighten the screws a wee bit at a time, and evenly. You are only trying to compress the rubber gasket between the tank and bowl a smidge more than it is now. Over-tightening can easily crack the bowl or tank. If there was lots of play, wipe up any moisture, lay a few pieces of toilet paper around the area and you will quickly see if it is still leaking.
Some toilets don't have screws, they have a "spud" that is about 3-1/2" wide. You might need to get a special spud wrench to tighten it.
Good luck!
Please note that the links provided are just quick-n-dirty suggestions. Some of the Park Tool sets would cover a lot of these things, but when building from frameset up... you may want to seek out a shop with the odd tools you might only use once or twice in your life.
----
Aside from the standard tools, like box wrenches, cone wrenches, Allen wrenches (aka hex keys), flathead and Phillips head drivers, Grease... you'll need tools for:
In addition, you may need:
----
I'm sure you could "get away" with less, or perhaps the Park Tool Advanced Kit but there's a reason for these tools. Good luck.
Just to add, and this is important: The tools you use the most should be the best quality you can afford. It will seem crazy expensive, but it will save you a lot of time, fustration, stripped bolts and replacement tools.
Something like hex set from 3-13, allen keys 4, 6, 8, 10, 11, 12 and the same sockets. Two of each screwdrivers and a big adjustable wrench. And spark plug socket.
1 and 2 and 3 and you are better rolling than me. Might be overkill, might not, depending on your wallet. Still need a few bits but that will cover most you will ever need besides random stuff.
Much better. The rest of your stuff looks pretty well chosen.
How long is that adjustable wrench? It looks big and heavy. I'd recommend a 6" one: https://www.amazon.ca/TEKTON-23002-6-Inch-Adjustable-Wrench/dp/B00FFUPS98
I'd also recommend a compressible down jacket if you don't have one already. They add a lot of warmth without much weight.
Especially since nothing can slide around 👌👌
Looks like you could use one of these though
Annnnd here we go again, another crazy but fun contest =)
Thank you!
a
b
c
d
E
F
g
h
i
j
k
l
m
n
o
P
q
r
S
t
u
V
w
X
Y
Z
Fluval sells this simple kit. It does get expensive replacing their specialized cartridges, but it's a good place to start if you're only ready to get your toes wet.
If you want to go bigger, it'll cost more upfront, but is cheaper to maintain.
Amazon Shopping list for CO2 under $200:
Cheap Regulator. There are better/nicer/higher quality ones out there. This one is cheap and okay.
Drop Checker
Diffuser
Check Valve
CO2 tubing
Thread tape
Adjustable wrench
5lb cylinder less than $15 to fill at gas supply store
You've got the wrench positioned on what you need to turn, but you need a longer-handle wrench. And you'll need to loosen both sides. Fitting a wrench on on the drive side might be tricky--you'd want a thin wrench to fit in there, or maybe you can take the gear shift mechanism off to get it out of they way. A basic open-ended wrench might fit. And adjustable wrench is less likely to fit, but might, especially a slim jaw one.
But that chain looks shot. I would go ahead and replace it. A single speed chain is cheap. You could even spring for a KMC "rustbuster" chain and be less likely to have this problem in the future. Regular lubing of the chain would also help avoid it in the future.
Hi.
One recommendation for your DH and FSIL: a bidet.
Don't trip out, they are cheap, sturdy, and easy to install. You know that nozzle on the wall behind the toilet? That's where the water for the toilet comes from. You basically stick the bidet right on that line.
Trust me, if I can do it, anyone can do it, you just need an adjustable wrench and a couple of different-sized screwdrivers.
Forget discussing toilet paper, seriously.
And non-digestive issues people need to learn about these things as well, because honestly? This washes your butt, okay. It does not give you an enema!
Adjustable wrenches have some perfectly valid uses. Holding the backside nut of a bolt your are tightening, for example - nice low torque use case. Also great for certain uses in bicycle repair (gripping freewheel removal tools and such).
If you want one that can handle some real torque, try this one. https://www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ
The problem comes in that there's lots of jobs they are NOT suitable for.
Here's what I would personally recommend for a decent minimum starter set, assuming you're just looking for general homeowner/handywork tools:
Those are all solid quality tools that I've personally used in the past. There's obviously tons of other stuff you'll need along the way if you're into fixing things but that's a great starting point.
Not a dealership lube tech but I'm a C tech in a independent shop. Get yourself a claw style oil filter socket and a torx bit set up to t-60 if lube techs do diff services in your dealership. Subarus are pretty easy to do maintenance on since you really only need a 8mm, 10mm, 12mm, 13mm, 16mm, and 17mm wrench/socket set to do most things.
How about using an Oil Filter wrench to improve your grip on your existing chuck?
As a bonus you can use these for a wide range of other applications in the shop as well, and the linked version comes in urine yellow so it will match your DeWalt.
Looks like you might be able to get a basin wrench in there.
https://www.amazon.com/Wolverine-PST151-Basin-Wrench/dp/B001B00LCA
Typically an old hand scew clamp would have been used to clamp to the blade. You sit the clamp on the saw table top and tighten it down on the blade. The table top then prevents the blade from spinning.
https://www.amazon.com/Tools-Record-Handscrew-Opening-226800/dp/B0001LQY6W/
You can also just make your own blade clamp by butting the saw blade against a sacrificial piece of wood with the fence on the other side (blade wood fence sandwich), then clamping the blade to them.
interesting. reminds me of this thing i picked up in an Ace a few weeks ago: http://www.amazon.com/Crescent-ATR28-8-Inch-Ratcheting-Adjustable/dp/B008NM6VIC
granted you have to manually adjust the mouth opening but that allows for a greater range of possible nut sizes. OPs would be really good if you find yourself having to adjust a lot of nuts that have only a small difference in size.
I hadn't thought of that! The spindle and the plastic thing came right out, but I still don't see how to get the bearings out. Doesn't seem like there's anything to grab.
Here's the best photo I could get: https://photos.google.com/photo/AF1QipPeSZ6aTxUmpD4i2oxJEBpGNujdhnTWNVsjZoM6
You really think it'll come out? I was oing to order this: https://www.amazon.com/Channellock-8WCB-WideAzz-Adjustable-Opening/dp/B001I70C34?crid=1FA0967YL9CAD&keywords=adjustable+wrench&qid=1540757299&sprefix=adjustable+wren%2Caps%2C177&sr=8-18&ref=sr_1_18
Father here, came to say this. Not everybody has mechanical skills, so here's what you need.
Not only will your kid be safer, the bike will last longer and you will be a better person for having learned this trick.
Not particularly. For your needs make sure it will do both filters. Measure the diameter etc. Something like This is just fine.
This is what I have in place of sockets to carry. I do have this as well, but you might be looking for more sockets. The pliers wrench should cover most things and it's way better than a nut fucker.
Link!
Happy Zambambo!
I work on semis and do filters a lot. Best tool I have found to remove them is a strap wrench. Titan Tools 21315 12" Strap Wrench https://www.amazon.com/dp/B00TU3UNW8/ref=cm_sw_r_cp_api_i_7bUEDb9P85QJ5
This thing is great for holding a nut behind something .
http://www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ
The cost of a plumber got me thinking about a specific tool, a basin wrench , that basically makes it a bazillion times easier (and cheaper) to tighten the big awkward nut that attaches the base of your sink doohickies to the underside of your sink/kitchen counter. Probably a lot of tools out there that make diy repairs a lot easier.
I think this craftsman one is a little more well made. I picked it up after stripping my plastic filter socket. It's like $12.99 if you get it from Sears
https://www.amazon.com/Craftsman-Oil-Filter-Wrench-Auto-Adjustable/dp/B003Y22RDO
Best of both worlds right here:
http://www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ
I bought two.. Couldn't be happier
Mine are the Stanley model; they work the same way but they have a lever that unlocks them like a pair of vise-grips. I think they're a little quicker/easier to use one-handed than the ones in the OP's picture, but the function should be the same.
Edit: here ya go.
the wrong tool for any job!
this on the other hand, is a good tool when you can't find the goddamn 1/2" socket...why does the 1/2" always go missing? every socket set should come with 3 of them.
Wideazz is very nice. I tend to grab knipex plier wrench more though.
Related question are the locking ones any good ? Link www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ
I think these work better.
https://www.amazon.com/dp/B01NAP6FQJ/ref=cm_sw_r_cp_apa_i_d7b5AbMFGEW84
What separates this product from one like this?
My friend that works at a (really good) local shop has used this style for years. I have used it when I did an oil change or three for him when when I was bored and hanging out at his shop
http://www.amazon.com/Craftsman-Oil-Filter-Wrench-Auto-Adjustable/dp/B003Y22RDO/ref=sr_1_1?ie=UTF8&qid=1396473414&sr=8-1&keywords=B003Y22RDO
It works VERY well on a range of filter sizes.
Edit - dangit now that I look at that link carefully, it is that style but probably a different brand
You want a faucet or basin wrench. Something like this:
https://smile.amazon.com/Wolverine-PST151-Basin-Wrench/dp/B001B00LCA/ref=sr_1_8?ie=UTF8&qid=1479677939&sr=8-8&keywords=faucet+wrench+tool
Here's one on Scumazon. A quick search wasn't able to find anything on Hazard Fraught, but I'd be very surprised if they didn't have one
Next time, use a rubber strap wrench, like this one.
https://www.amazon.com/dp/B003UDS83U/
Why do you recommend the socket type over the open jaw/telescoping type?
https://www.amazon.com/Superior-Tool-Eleven-Wrench-Infinitely-Adjustable/dp/B0000CBJD4
I like the channel lock wide azz or even just the normal non wide azz ones if you need bigger than 8 inches. they are made in Spain by Irega and I have never had any issues with them.
Buy this grease:
White lightning grease
Buy this general lubricant:
Triflow
Buy this multi-tool:
Alien II It includes all common allen and wrench sizes, a chain breaker, and spoke wrench.
Buy this socket set:
Ice tools 8 x 9 x 10
Get this adjustable wrench:
Wrench
Buy these tire levers:
Park tool levers
With all of that you should have more than enough to do basic maintenance with under $80 worth of tools.
As you get more skilled, you'll need some specialized tools for the bottom brackets, headsets, and cones on your wheels but those will vary by type/bike, and in time you will own multiple bikes so buy the tools when you when you need them.
I got mine from Princess Auto, which is a Canadian chain something like Harbour Freight. They have a surplus section where all kinds of neat things show up from time to time.
Stanley makes one with a conventional handle. A spud makes using a cheater easier, but at least Stanleys don't have a bulb at the handle end.
The Stanley version is very well rated.
https://www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ/ref=sr_1_2?s=hi&ie=UTF8&qid=1509832400&sr=1-2&keywords=Locking+Adjustable+Wrench&dpID=41s-XgSjppL&preST=_SX300_QL70_&dpSrc=srch
get an adjustable wrench. I used one for the longest time before I got a skate tool. grips really well if you tighten it.
I'm okay with this one.
A few tips I didn't see already listed:
Take the strap off a small strap wrench and just wrap it around the bell to hold it tight while you loosen the nut
http://amzn.com/B003UDS83U
I had this problem with my nylock a while back and asked the same question...nylock's are very tight the first few times.
I've got a 4" crescent wrench that's big enough for most of the bolts on a fixture. Just can't do the yoke bolt.
http://www.amazon.com/Crescent-Adjustable-Wrench-4-Inch/dp/B00002N7RE
Mine are Stanley brand from Amazon, and Sears sells a Craftsman model that appears to be similar. Obviously these are both US sellers but I'd think they're also available in Europe either under one of those brands or another.
Never used this but it says the small one goes down to 3/8 inch http://www.amazon.com/gp/aw/d/B003UDS83U/ref=mp_s_a_1_2?qid=1459413404&sr=8-2&pi=SY200_QL40&keywords=mini+strap+wrench&dpPl=1&dpID=41tQIsSyiXL&ref=plSrch
$76
https://www.amazon.com/gp/aw/d/B00TSTT2EY/ref=mp_s_a_1_19?ie=UTF8&qid=1519797935&sr=8-19&pi=AC_SX236_SY340_FMwebp_QL65&keywords=bahco+adjustable+wrench
Always buy these:
http://smile.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ/
They are always the correct answer.
He needs a locking crescent wrench!
https://www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ
Here's a 4-inch wrench for $5.49. Those stick figures are just tiny.
Maybe a strap wrench.
Did anyone notice the price on Amazon compared to Walmart
This thing is magical. Tons of uses you didn't know you needed it for. You won't use it every day, but when you do use it, you'll wonder how you got by without it.
https://www.amazon.ca/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ
What about a rubber strap wrench?
https://www.amazon.com/dp/B01NAP6FQJ/
This one: TEKTON 23001 4-Inch Adjustable Wrench https://www.amazon.ca/dp/B000NPR438/ref=cm_sw_r_cp_api_i_Yb01BbXSJ2HFQ
It is a basin wrench
Well, sir, obviously youre doing it wrong. http://www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ
I should have mentioned this: if you are thinking of trying to fit a bike in your car. Carry two adjustable wrenches. Reason is in case they are riding without quick release. Also, put the chain in a plastic bag so the grease doesn't get everywhere. If they can take off/on the wheels the better but if they can't, you may need to put the wheels on/off. Quick tutorial for freewheel. Quick tutorial for fixed, I don't particularly like this video since the guy didn't have a horizontal dropout but it is the closest I could find. You could also get a rear bike rack for your car in my experience the Saris is pretty reliable but it is fairly expensive this one is $80. They are some that are cheaper but I have had one bad experience with a cheap bike rack and since you are hauling people it would probably not be a good idea if the bike rack were to fail. I hope this helps.
I posted something similar a while ago, you might find some more information there. Basically it's supposed to work very well with rusty and already fucked nuts and also double as vise grips in a pinch (pun not intended)
Here's a Stanley one on Amazon.
Hey! Amazon sells them so you can fuck your own nuts in the privacy of home.
These are my two uncommon but frequently used tools, This guy cause I hate carrying around tons of nut drivers https://www.amazon.com/Driver-NutDriver-Klein-Tools-32800/dp/B01I0QVP18
And this one because I do a lot of bucket truck work and often need to use an adjustable but they get loose and sometimes dropped.
https://www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ/ref=sr_1_5?ie=UTF8&qid=1549061734&sr=8-5&keywords=locking+adjustable+wrench