Reddit mentions: The best airsoft gun scope mounts
We found 9 Reddit comments discussing the best airsoft gun scope mounts. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 4 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Warne 4007476 1" Tikka Permanently Attached - Medium Matte Rings
- Made of highest quality material
- Manufacturer: Warne
- Warne 1 inch Tikka permanently attached - medium matte rings
Features:
Specs:
| Color | Black |
| Height | 1 Inches |
| Length | 6.5 Inches |
| Number of items | 1 |
| Size | One Size |
| Weight | 0.43125 Pounds |
| Width | 4.75 Inches |
2. UTG 3-Slot QD Lever Mount Adaptor and Riser, Medium Profile
Most versatile for Use as QD riserImmediate Conversion of any Non-QD mount accessories to QD deploymentMade from aircraft aluminum with matte Anodizing
Specs:
| Color | Black |
| Height | 1 Inches |
| Length | 4 Inches |
| Number of items | 1 |
| Size | One Size |
| Weight | 0.14375 Pounds |
| Width | 3 Inches |
3. BLACKHAWK Offset Flashlight Rail Mount
Perfect case for storage and transport of your AR and mags with extra pockets for accessoriesFive exterior mag pockets and two large accessory pockets for gearWraparound tactical web handles provide superior weight support and durabilityBuilt from tight-weave, heavyweight 600 denier polyester with t...
Specs:
| Color | Black |
| Height | 2 Inches |
| Length | 7 Inches |
| Number of items | 1 |
| Weight | 1.5 Pounds |
| Width | 3 Inches |
4. Leupold Rifleman Scope Rings
Model #57323 - Rifleman Rings 1" - . 22 RF 3/8-inch Detachable See-Thru Rings with a Matte finishPrecision machined from aircraft grade aluminumIncludes all mounting screws
Specs:
| Color | Matte |
| Height | 2 Inches |
| Length | 6 Inches |
| Number of items | 1 |
| Release date | September 2008 |
| Size | 1" - .22 RF 3/8-inch Detachable See-Thru Rings |
| Weight | 0.2 Pounds |
| Width | 5 Inches |
🎓 Reddit experts on airsoft gun scope mounts
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where airsoft gun scope mounts are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Interested in what Redditors like? Check out our Shuffle feature
Shuffle: random products popular on RedditTop Reddit comments about Airsoft Gun Scope Mounts:
Summary
1. Warne 4007476 1" Tikka Permanently Attached - Medium Matte Rings
- Made of highest quality material
- Manufacturer: Warne
- Warne 1 inch Tikka permanently attached - medium matte rings
Features:
Specs:
| Color | Black |
| Height | 1 Inches |
| Length | 6.5 Inches |
| Number of items | 1 |
| Size | One Size |
| Weight | 0.43125 Pounds |
| Width | 4.75 Inches |
2. UTG 3-Slot QD Lever Mount Adaptor and Riser, Medium Profile
Most versatile for Use as QD riserImmediate Conversion of any Non-QD mount accessories to QD deploymentMade from aircraft aluminum with matte Anodizing
Specs:
| Color | Black |
| Height | 1 Inches |
| Length | 4 Inches |
| Number of items | 1 |
| Size | One Size |
| Weight | 0.14375 Pounds |
| Width | 3 Inches |
3. BLACKHAWK Offset Flashlight Rail Mount
Perfect case for storage and transport of your AR and mags with extra pockets for accessoriesFive exterior mag pockets and two large accessory pockets for gearWraparound tactical web handles provide superior weight support and durabilityBuilt from tight-weave, heavyweight 600 denier polyester with t...
Specs:
| Color | Black |
| Height | 2 Inches |
| Length | 7 Inches |
| Number of items | 1 |
| Weight | 1.5 Pounds |
| Width | 3 Inches |
4. Leupold Rifleman Scope Rings
Model #57323 - Rifleman Rings 1" - . 22 RF 3/8-inch Detachable See-Thru Rings with a Matte finishPrecision machined from aircraft grade aluminumIncludes all mounting screws
Specs:
| Color | Matte |
| Height | 2 Inches |
| Length | 6 Inches |
| Number of items | 1 |
| Release date | September 2008 |
| Size | 1" - .22 RF 3/8-inch Detachable See-Thru Rings |
| Weight | 0.2 Pounds |
| Width | 5 Inches |
Warne Maxima rings for Tikka rifles:
https://www.amazon.com/gp/product/B0006967ES/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
The 1in medium height work great for my VX3i (3-10x40 I believe) on top of my T3X hunter
UTG 3-Slot QD Lever Mount Adaptor and Riser, Medium Profile https://www.amazon.com/dp/B00BUVLZES/ref=cm_sw_r_cp_apa_LfJGzbCVVHYP0
Maybe? Only one pin so it should fit decently and provide a solid 1913 surface.
Im thinking of trying this https://www.amazon.ca/UTG-3-Slot-Adaptor-Medium-Profile/dp/B00BUVLZES/ref=pd_cp_200_4?_encoding=UTF8&psc=1&refRID=XP5W0ZNJWRSGZPZE2CV8
But that might be too high for you as well.
Why not a generic rail mount like this that will take any flashlight with a 1" body tube?
And then toss in an Armytek Dobermann and a matching pressure switch. Total of $115.
edit: Dobermann Pro looks worth it for the $5 bump.
Leopold rifleman
Leupold Rifleman Rf 3/8"" Detachable See-Thru Rm Matte 57323 https://www.amazon.com/dp/B001HN5H7K/ref=cm_sw_r_sms_apa_X4qMBbXKPKXKZ
Streamlight's Polytac can be had for about $35. Throw it in a Blackhawk mount, and you've got a decent setup for less than $50.
TRS-25: https://www.amazon.com/Bushnell-Trophy-TRS-25-Riflescope-1x25mm/dp/B00200E0HM/ref=sr_1_1?ie=UTF8&qid=1542748164&sr=8-1&keywords=bushnell+trs25
​
Mount: https://www.amazon.com/UTG-3-Slot-Adaptor-Medium-Profile/dp/B00BUVLZES/ref=sr_1_9?ie=UTF8&qid=1542748401&sr=8-9&keywords=utg+riser
​
Shockwave 12 ga.: https://www.gunbuyer.com/catalog/product/view/id/104487/s/mossberg-590-shockwave-12ga-pump-action-14-barrel-6rd/
​
Shockwave 20 ga: https://palmettostatearmory.com/mossberg-590-shockwave-20ga-shotgun-50657.html?avad=211021_d13cbc985&utm_source=Avantlink&utm_medium=Referral&utm_campaign=cl
That's not accurate at all.
The stock sight literally looks through the rail. There's a notch cut in the rail to be able to look through.
http://www.thefirearmblog.com/blog/wp-content/uploads/2014/04/ruger.jpg
As the TRS25 sits above the rail, it'd be impossible for it to co-witness.
Here's a guy who put that together anyway though: http://www.perfectunion.com/vb/ruger-10-22/112769-bought-new-10-22-today.html#post968513
And his pic here really shows how much higher the TRS25 would sit above the sight-line of the open sights (which again look straight through that channel in the pic rail): http://www.perfectunion.com/vb/attachments/ruger-10-22/30113d1457466285-bought-new-10-22-today-100464147.jpg
___
That being said, you do have options. A riser won't really help, because the cross-bar for any pic mount is going to block the view. However, a QD mount for the TRS would allow you to quickly take it off if need be and use the irons.
Or, as is always the answer: Tech Sights will co-witness. But you'd need both the front and rear as they're both taller.