Reddit mentions: The best ammunition & magazine pouches & holders

It always gets hard dating these kinds of things...but according to this site which not only lists serial numbers but the number of actually produced firearms for the month - the number in process and more importantly the number accepted by ordinance approval it sounds (looks) like its possible for a rifle to be started in one month and then finished (or accepted) in the next as there is constant carry over during all the production.

Of course its also possible someone took off a closely matching barrel from another receiver and put it on yours. Either way I would check the amount of throat erosion and of course if the bolt head spaces into the barrel. If the rifle is solid and that all holds up as long as the price is good it shouldn't be an issue as it probably is an all original (or at least I cant find anything that would say it isnt)

Theyre great guns and if you want a tip buy some of these 6.5mm Laddram Clips as they will work in an 03 as stripper clips (will ping out after loading/as you close the bolt) its impossible to get original 03 stripper clips as they were two parts (brass and steel) and once the rounds were loaded the two parts would separate and really were one time use, ive been using these same couple mauser clips for a few years now over and over no issues, good luck!

edit just saw the price on those 6.5mm clips, when I purchased them they came in a 40 ct milsurp box (in total about $35) so shop around as they aparently now only give you 10 for $28.50 which sounds steep to me.

A basic cleaning kit, a bottle of Break Free CLP, some disposable ear plugs, and a pair of safety goggles shouldn't run you more than $30 total and will be perfect for what you want. As you get more involved and buy more guns you'll buy more gear, better cleaning stuff (boresnakes and the like), you'll find an oil that you particularly like (personally, I'm partial to Militec and Strike Hold), and some fancy electronic ear-muffs and nice shooting glasses.

As far as a case, unless you're carrying an expensive rifle or custom match-grade pistol or you'll be rock climbing with it, you don't need a Pelican case. A $10 plastic pistol case with egg-crate foam inside will suffice for just about everything you will be doing with your pistol. I know you said you already ordered snap-caps, but I have to recommend the A-Zoom aluminum caps. The plastic ones break too easily.

If I could give you one piece of advice it would be this: I know that it's fun to buy every accessory ever made for your gun, but honestly most of them are more gimmicky than useful. Start simple and cheap and buy things as you need them. Learn from other shooters what works and what doesn't and make friends that will let you try their gear, guns, and accessories so that you aren't buying blindly. Everyone is different and what works for one person may not work well for you.

Good luck and welcome to the club!

Thanks!

I actually have two fishing systems there. This one, which is awesome and I wish I still had access to a lathe so I could make one myself, and this one. That latter system kinda sucks, as it likes to fall apart and doesn't cast well. Since the reel doesn't actually spin (due to plastic-on-plastic friction as well as the axle being threaded) you have to draw the line out and cast it by hand, effectively making it worse than the hobo hand rod. I'll try printing this one off, which is made by the same guy but designed to use a bearing to allow the reel to spin when cast.

The saw is just an Opinel folding saw. But it fits perfectly into a Condor MA31 mag pouch. The laplander saw fits just as well, and a Silky Gomby can fit, it just takes up more vertical space and you don't get as much engagement on the velcro.

There are a lot of components to firing off a good shot and as a new shooter, it can be tough to keep them all in mind: You need to have good trigger control, you need to focus your eyes on your front sight, you need to have a consistent and firm grip, your stance needs to be consistent and steady, you should time your shots to your respiratory pause to maximize accuracy. All of that is what you need to achieve, and as you get more experienced, you'll see how all of these components work together.

Anticipating recoil can be addressed from two angles, both of which involve focusing your mind on something other than anticipating when the trigger will break the shot: Actively thinking about maintaining front sight focus and actively thinking about trigger control. With practice, you'll be able to do both at the same time.

A good exercise that will address both of these is dry firing. The objective is to practice focusing on your front sight while manipulating the trigger in a manner which does not disturb sight alignment. You'll need an unloaded pistol and a featureless wall. Get a good thumbs forward grip on the pistol and aim at the wall. Make sure to pick an area without markings because you don't want anything to pull your focus away. Focus your eyes on the front sight. The rear sight should be blurry and you should be able to make out lots of detail on your front sight. Now place your finger on the trigger and slowly apply straight rearward force... slowly and steadily increase that pressure until the trigger breaks. Don't think about "pulling" the trigger, just think about increasing pressure. While you're thinking about pressure, keep your eyes focused on your front sight. If it moves, stop putting pressure on the trigger and start from the beginning. Do this until you get 10 good clean trigger breaks in a row.

The next time you go to the range, dry fire a few times before you run any live ammo through your pistol. If you find that you're still anticipating recoil, try the ball and dummy drill: You'll need some snap caps and some live ammo. Have your brother load you up a mag with a random distribution of snap caps and live ammo. Shoot at your target and treat it as a dry fire drill. If you manage to keep the pistol still even on snap caps, congratulations! If not, stop the drill, do 10 perfect dry fire reps, and run the ball and dummy again.

I know it's a lot to take in, but trust me that all of this will make sense and get easier the more you do it. It's not a bad idea to keep a personal training log and plan the drills you will run ahead of time. Just be honest with yourself and you will improve.

This is why I linked the 4 can ammo crate also. It seems like a good deal for throwing in the truck since it has a tray they snap into. They are 30 cal cans, but for $6 a pop with free tray it seems like a good trunk set.

I agree though the flat ones definitely are nice for stationary storage.

I dont think I saw this recommended in here yet but sorry if it is. When I first started carrying I was too nervous about keeping one in the chamber. Thinking back now Im not sure why I was because I refused to buy a gun with a safety for carry purposes. Anyway, someone recommended me picking up a few Snap Caps to use for dry firing.

Well I decided to load my firearm with the snap cap and then do my normal activities around the home. Surprise surprise, no accidental discharges. I decided to take it a step further and did things I normally wouldnt be doing. Jumping jacks, rolling around on the ground, and anything else that could possibly make it go bang. Nothing. Worked my way up to practicing unholstering, dry firing, racking the slide and reholstering. Never had it unintentionally fire (snap cap.)

So that was it. It gave me the confidence that its never going to go bang unless you stick a finger in there and pull the trigger. Follow the safety rules and you will be good to go.

-------------------

As for comfort try out a different holster and or position. Also make sure you're using an actual gun belt. Using an actual gun belt made a world of difference for me. Also if you a skinny dude, give appendix carry a try. Check out the G-Code INCOG holster. You can check out the video from Travis Haley here: INCOG Appendix Holster Appendix carry works great for deeper concealment and is perfect for the sitting position. Also allows for extremely fast draw and reholstering. Good luck!

> any reason why i'm shooting high and left with both guns?

At 10 and 15 yards, your group should be centered around your Point of Aim.

Your best solution for accuracy improvement (including putting your Point of Impact directly over your Point of Aim) is in-person instructor feedback. Ask if your local range has a regular class or instructor. If not, contact a local NRA instructor and ask for a one or two hour block on marksmanship fundamentals.

> I am mostly interested in training for self defense, but am also interested in doing local competetive matches like IDPA

You need a holster, and to be able to draw your pistol and handle your firearm without endangering yourself or others. Your accuracy is good enough to get started.

https://www.reddit.com/r/CompetitionShooting/comments/5qb4qf/what_is_something_you_wish_you_had_known_before#dcylzqq

-----

Where is the front sight at on the target, at the moment immediately before the front sight lifts in recoil?

As Adam describes it, "If you can't describe it, you probably didn't see it (or focus appropriately)." If you are having problems seeing it, mix some snap caps into your magazine (aka do the Ball and Dummy Drill).

-----

> Are there any drills out there to help bring my grouping back up and center?


Additional Drills:

• Focus on the front sight
  
  
• Press the trigger straight back to the rear (without moving the sights off target)
  
  
• Learn to Call Your Shots
  
  
• Make sure the sight doesn't move when the hammer/striker fires (you can practice this without ammo, then validate at the range with live-fire)
  

So I purchased this Maverick 88 back about a year and a half ago. I was purchasing a rifled 20 gauge at the time for hunting. That was my first firearm and I knew just about nothing about firearms. The guy I purchased that 20 gauge from also sold me the Maverick 88. I got it for $200 out the door, used. I now know that I could have gotten new one for $200 before tax. Oh well, you live and learn.
Anyway, I didn’t much care for this Maverick 88. I shot it when I first bought it. I shot it again last spring to determine if it would be worth it for turkey season. No threaded barrel, so not so great. It’s been sitting in my safe since last spring. I’ve wanted to try to sell it but hadn’t gotten around to seeing what I could get for it. Then, I saw a post on the sub about a guy who saved a Mossberg 500 from a pawn shop and turned it into a home defense shotgun. I decided that I would do the same thing to my Maverick 88. I wanted a home defense shotgun and I wanted to learn more about the inner workings of firearms. I also gave it a thorough parts cleaning.

• Communite Bright Tac Light - $16.99
  
• Mossberg Action Slide Tube Assembly 6 ¾” - $48.49
  
• Action Slide Nut - $12.00
  
• Adaptive Tactical EX Performance Forend and Adjustable Stock – Black - $99.99
  
• Choate High Visibility Magazine Follower - $4.99
  
• Mossberg Magazine Tube Spring – $7.69
  
• Mossberg 500 Security Barrel 12 Gauge 18.5" - $99.97
  
• TRUGLO 12-20 Gauge Shotgun Glo-Dot II Fiber Optic Front Sight Green - $19.34
  
• TacFire Single Point Double Bungee Rifle Sling HK Style - $19.99
  
• TacStar 6 Shot Side Saddle - $26.71
  
  edit - I forgot to list the side saddle

A couple useful channels on YouTube (also check full30.com):

• nsz85
  
• John Lovell
  
• Jerry Miculek
  
• Reid Henrichs
  
  Things to look up:
  
  
• 4 rules of firearms safety
  
• cleaning your weapon
  
• trigger control
  
• grip and stance
  
• sight alignment
  
• administrative load
  
• speed/combat/emergency reload
  
• unloading and clearing
  
• clearing malfunctions
  
• double taps, controlled pairs, hammer pairs
  
• standing vs kneeling vs prone shooting
  
• breath control
  
• moving and shooting
  
• cover vs concealment
  
• shooting around/over barricades
  
• best rounds for home defense vs range vs longer range
  
• gear (slings, belt, mag pouches, chest rigs, plate carriers)
  
• red dots vs irons vs low power variable vs fixed magnification optics
  
  For any given item above, I like to consult more than one source on them, do forum searches, ask experienced buddies, etc. to get a rounded picture.
  
  If you're going to do a lot of dry fire practice, it's important to hit the range as soon as possible to get a feel for the level of recoil and muzzle movement. This way you'll practice at home with that in mind. Also, as is commonly known, with any move you learn (like reloads or whatever) you should start slow and get it smooth and perfect, then gradually increment up the speed, always seeking smoothness and sureness of motion. No herky jerky fumbling.
  
  You may want to get a 556 mag pouch to start practicing loads, reloads, and malfunction drills. Cheapest is the Mako paddle pouch since you won't need a full gun belt or battle belt setup to use it. Otherwise choosing a gun belt and pouches will take time and money to get right for your needs. For those, avoid pouches with velcro flaps or the elastic retention loops over the top, and stick with open top friction retention like the Esstac KYWIs or HSGI Tacos.
  
  Also, weapons manipulation techniques used in defense/tactical purposes may be different from those used in competition. They'll be slower, surer, more failsafe. Whereas in competition you're going solely for speed and accuracy and screw-ups aren't fatal.
  
  For example, on a speed reload in competition you might hit the mag release button and let the mag fall out, grab a new mag with your thumb along the side and insert straight up into the magwell and hit the bolt catch paddle with that thumb. Whereas in a tactical or defense situation you may flick the safety on, hit mag release button, grab the empty mag and strip it out, insert fresh mag, optionally give it a good tap on the bottom, then tug it to make sure it's seated, then hit the paddle, then safety off. The latter is a little slower but prevents negligent discharges, mags not dropping free, mags not being fully seated, and other murphy's law things.
  
  Anyway, have fun!

Nice, glad you had a good time, and ripping jeans while going commando while going commando on your first outing in airsoft is the stuff of instant legend.

As for the advice; I'm still too noob to speak with much authority (my first game is this weekend), but I at least have been gearing up a bit this season while biding my time. I'd recommend a good battle belt and then either one or a pair of drop-leg pouches over those climbing harnesses. Unless you plan to go fast-roping any time soon, a climbing harness won't be very functional, and it won't do much to keep the crotch of your pants intact if that's what you're worried about. Drop-leg pouches, on the other hand, are removable if you're not using them, and drop-leg platforms come with molle strips you can mount whatever gear you want on them, making them configurable too.

Plus, bonus no crotch-flossing or wedgie-inducing load-bearing straps running down the middle that are the bane of my masculine existence whenever I have to put one on.

Edit: Note, the above links are more for reference than as specific product recommendations.

I would say a good first step in preparing for SHTF is being able to keep all your mags full at all times. Keeping one of these full of loaded PMAGs gives you 450 rounds that are ready to go and easily portable. They make similar ones for pistol mags too.

As others have said, .22LR is a great choice for stockpiling too since it's cheap and light. I don't keep any .22 mags loaded up just because given my options it would be more of a long term choice vs the first guns I'd grab.

Here's a great spreadsheet for tracking your stockpile.

Not to that exact one, found it in the hunting goods section of WalMart for $8. I can say that my harness belt is 2" as well, and it fits perfectly. This was more or less what it was.

I should also mention that ammo boxes are a great way of storing AA batteries off your person. Most are cheap, waterproof, and hold around 50-100 batteries. This one has been the best $3 I've spent on organization in my life.

Got your back Jack.

http://www.amazon.com/gp/product/B00551HARU

A couple notes about it:

1. it's not adjustable, not sure if you need it to be, just saying. But the size is pretty nice
   
   2)They do fit perfectly, unless they don't have a neck, the 3rd pic shows the two bottles that couldn't fit because they were too big
   
   Enjoy!

I'd recommend a Bushnell TRS25. Yeah it's a bit more expensive but it's miles ahead of any 'airsoft red dot'

You only need eye protection. I'd recommend face protection as well. You don't need a vest unless you need to carry stuff.

Edit: Looks like the X9 comes with a mid cap, not a hi-cap. You'll probably want a couple extra mags and something to carry them. Could get something like a Condor belt and SMG pouches

Since your dad likes hunting, I think this is a great gift!

http://www.amazon.ca/gp/aw/d/B000HZEN4W/ref=mp_s_a_1_4?qid=1427647493&sr=8-4&pi=AC_SX110_SY165_QL70&keywords=hunting&dpPl=1&dpID=51adU1jLcvL&ref=plSrch

& this add-on!

http://www.amazon.ca/gp/aw/d/B001F0GF4E/ref=mp_s_a_1_36?qid=1427647630&sr=8-36&pi=AC_SX110_SY165_QL70&keywords=hunting&dpPl=1&dpID=41es1R3tE3L&ref=plSrch

I hope you feel better! 💓

Becuase of your beautiful hammer 7 setup I want you to go with something like this:

http://m.ebay.com/itm/171375695383?_mwBanner=1

But for practical reasons the kingman magazines fit perfectly in any m4 military style pouch:

https://www.amazon.com/gp/aw/d/B0035J8CDA/ref=mp_s_a_1_4?ie=UTF8&qid=1485377419&sr=8-4&pi=AC_SX236_SY340_FMwebp_QL65&keywords=m4+mag+pouch&dpPl=1&dpID=51cTPDwcYfL&ref=plSrch

Cardio Cardio Cardio. And some tac gear is not a bad thing if you are aware of how to use it. I recommend this guy. It is easy to modify with some longer velcro straps to fit any clip size. And that tac vest has some room for expansion. I also have this dump pouch.

I've also got a workout guide to get you in shape and ready for some running Here. I wrote this for me and it has already started but you should be able to catch up.

And make sure you have fun and lots of it.

I had an amazing time, getting to shoot basically every service rifle used in WW2 all in the same day was awesome.

Many thanks to the guys who shuttled my girlfriend and I up to the range and back down again. To the gentleman who gave us a ride back down (whose username I didn't get), the racks I use for my ammo cans are the MTM AC4C. Next time we're definitely borrowing a truck and maybe camping for the weekend.

Like everyone else said, amazon is probably your best bet. In my very unprofessional opinion, this one is great. Mako Polymer Magazine Pouch with Belt Paddle for 5.56mm Magazines https://www.amazon.com/dp/B004O6CBSA/ref=cm_sw_r_cp_api_i_FbuBDb407Q6FF

Retention is good and draw is very smooth.

Doesn’t really matter, these are pretty sweet and r/gun deals seems to love em

MTM AC4C Ammo Crate (4-Can) https://www.amazon.com/dp/B01MU6ZAPG?ref=ppx_pop_mob_ap_share

Best no nonsense storage is an ammo can. You can get them at a military surplus store for like $10.

Amazon has them a bit pricier but still good.

http://www.amazon.com/Military-Surplus-50-Caliber-Ammo/dp/B000J4HXUC/ref=sr_1_3?ie=UTF8&qid=1405489615&sr=8-3&keywords=Ammo+cans

They are airtight, designed by the military to keep ammunition and explosives moisture free.

The smelliest stash can be right under you and you'd never smell it. It has the upside of having way more room than a mason jar.

They're not exactly pretty but I would recommend going to an army surplus store and picking up an ammo can. They're water and fireproof and you can usually find them in various sizes. Great for documents or just old valuable crap.

Modified w/ 7.5 is perfect until you get a few rounds under your belt. Keep track of your performance -- and after 6-7 times out, you can try #8 shot, or a different choke. This way you can see if it is helping or hurting you.

You can try your hunting vest if it has large front pockets, but the problem with most vests is to me, they hold shells too high, and it can become clumsy especially when you pump (Since you have a 500). Granted, depending on how the tourney is set up, if you only need 4-5 shells on you at any one time, it could be more than fine. If you need to carry 20+ shells, I recommend a shooters bag like this one:

http://www.amazon.com/Allen-Company-Double-Compartment-Shooters/dp/B000VEA74O/ref=sr_1_1?ie=UTF8&qid=1341239017&sr=8-1&keywords=shotgun+shell+bag

Put it on your offhand side. And when you're not shooting skeet, it's handy for like carrying your ears etc.

I know it's not the question you asked, but related. This pouch fits a 35 drum perfectly. It's almost like it was made for it. The bottom is flat too, so it's not awkward or anything.
http://www.amazon.com/VISM-NcStar-Folding-Pouch-Black/dp/B007OZHIZO?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00

https://www.amazon.com/MTM-Tactical-Magazine-Storage-TMC15/dp/B00HVDFSQ0

Those are the ammo cases. They come with the foam inserts already in there. I like them a lot. Another comment mentioned being able to store more in an empty case without the inserts, which is true. My OCD likes the neatness of these tho.

And yes, sand PMAGs that I rit dyed various colors.

Looks like it has pretty much all you need. Maybe a buttstock shell holder like this or this but you don't really need anything else on that little beauty.

I got this.

I've been to Argentina for high volume wing shooting twice: once up in the northern jungle region, near Salta, and once down south a couple hours away from Bajia Blanca.


I have some questions and related advice. Please answer some of my questions, and I'll check back later and give you more specific advice.

First, who is your outfitter? I went both times with Sierra Outfitters. They're great guys, and they have some fantastic spots.

Where are you going exactly? Up North, or down South?

bring a few thousand dollars in $20s and $100s Cash is king in Argentina, and US dollars are worth A LOT of Argentinian pesos. Try to figure out your budget for all of your expenses, and bring that + half in US dollars.

Are you bringing your own guns? Just don't. If you do, you will need the cash to bribe their version of TSA to get your paperwork signed off. $100 for the head chimp usually gets things moving smoothly.

Your flight and travel time will take longer than you can prepare for.

Tip your bird boys!They work hard, and get shit pay. It's also common courtesy to tip your bird boy. $100 to a birdboy is a months wage. Give him $100.

Bring ear pro, and a big pack of foam ear plugs as back-up. You will be shooting thousands of rounds a day. It is absolutely critical that you protect your ears.

Bring light-weight work gloves (mechanix) or a pack of accountant thimbles. If you are shooting thousands of rounds a day, you will also be reloading thousands of rounds. Protect your reloading thumb from getting raw and sore with a single rubber thimble, or wear gloves.

Bring a shell bag

Bring light-weight long sleeve shirts and long pants.They have mosquitos and nosee'm's (biting flies). Depending on where you will be, you should prepare for getting bit.

It's very common for new shooters to hit low-left. There is a wonderful drill you can do to detect and solve this problem very easily.

Get a pack of these:

http://www.amazon.com/A-ZOOM-15116-Hunting-And-Shooting-Equipment/dp/B0002IKANW/ref=sr_1_1?ie=UTF8&qid=1457829953&sr=8-1&keywords=9mm+snap+cap

Have a friend load a few at random in a magazine filled with live rounds. They will feed normally and you won't know it's there until you press the trigger and hear a click instead of a bang.

Chances are, when that happens, you'll see the gun dip slightly down and to the left. Now you know what's wrong and you know how to fix it.

With the snap cap still in place, dry fire a few times, being careful not to let the sights move at all. Once you think you've got it, cycle the action to eject the snap cap, and try again. While you are being careful you'll be striking closer to the center of the target. If you remain careful, the next snap cap will reward you by showing that your sights haven't moved.

It's not uncommon for skilled shooters to balance a nickel across the front sight, and dry fire the gun without the nickel falling off. When you can do that consistently you'll be shooting very well.

>a ton of husks, wads, and no.4 shot I picked up for peanuts at a garage sale. I also have an old original lee load all 12ga press.

>My question is what primers/powder is recommended for loading this?


Doesn't quite work that way. You need to work with an established recipe.

What kind of hulls are they? What kind of wads? That makes a big difference in the powder/primer suggestion.

Your best bet to to by the Lyman book http://www.amazon.com/Lyman-Shotshell-Handbook-5Th-Edition/dp/B00162MK2M/ref=sr_1_1?ie=UTF8&qid=1376656361&sr=8-1&keywords=lyman+shotshell

[Get one] (http://www.amazon.com/Sports-Shotgun-Shell-Bandolier-Rounds/dp/B00551HARU/ref=sr_1_fkmr1_2?ie=UTF8&qid=1405823453&sr=8-2-fkmr1&keywords=Team+fortress+2+heavy+bandolier) with no bullets but with large enough holes like shotgun shells. Then try to make bullets from relatively inexpensive materials like cardboard and paper, say like a paper rocket.

Can you find any place to put your own pouches? these are pretty good, and good price too

One thing you can do that helps a lot:

• Buy some snap caps
  
• Have a buddy load them randomly through your mag(s)
  
• Take nice, controlled shots at a paper target no more than 5 yards away
  
• When the snapcap shots come up, you will be surprised. Pay attention to what the gun/sights do when you are expecting a band, and don't have one
  
  This is the best way I've ever found with new shooters or new guns to figure out what is happening. If ou are flinching, jerking the trigger, etc.
  
  EDIT: Just realized that lexor said the same thing.

I'll definitely post the whole project sometime! I live in North Carolina, USA. What I did was buy one of these:

http://amzn.com/B000J4HXUC

I cut a square out of it and glued/caulked a 1/4" plexiglass pane over it, which I pointed the camera out of. I drilled a hole in the back just big enough to run a cut power cable through and wire the end back to it on the inside, glued and caulked it. It's definitely 100% weather-proof. The only problem I foresee is it getting too hot in the dark metal case. Time will tell when summer comes!

I wrote a python program to take a picture and store them on an SD card, and I'm still working on the code for it. It'll be a work in progress for a while improving it. I installed a Ras-Clock so if the power went out, it would still know when to pick up and take the next frame.

For the print server, I just use something called CUPS. I started here:

http://www.raspberry-pi-geek.com/Archive/2013/01/Converting-the-Raspberry-Pi-to-a-wireless-print-server

It's pretty simply to set up on the client end once you get it configured. All I need it to do is print, and that's what it does.

I was just saying you could do something like this. If you have power tools and some modding inclination it shouldn't be too bad, depending on how nice you want it to look. Amazon link to an ammo can, I'm sure you can get them cheaper elsewhere (surplus store if you have one nearby).

You'll get better.

I've found that on my striker-fired pistol (a Glock), I'm actually much more accurate and much less likely to flinch if I take quicker, more decisive trigger pulls. Slowly trying to squeeze off aimed shots I would be all over the place, but quicker follow-up shots I'd be much more accurate. Think I came to realize that being too slow with trigger pull I'd feel it budge and creep to right where it was about to break, and that'd telegraph "imminent shot" to my brain and I'd flinch. Taking a slightly quicker and more decisive pull made for a crisper, cleaner break and less movement.

I like the idea of randomly throwing in some snap caps in my magazines. Like take a few mags, load them and randomly throw a snap cap or two in each, and mix them up so you won't know if your next shot will be live or not. Should help in being able to tell what you're doing when the gun goes 'click' and you see where your front sight is pointed.

They're basically inert dummy rounds (usually plastic or lightweight metal with some polymer where the primer normally sits to absorb the impact of the firing pin). They have them for all the popular calibers. They're great for dry-fire practice too :)

Here are the ones I use in my 9mm: AMAZON LINK

I just had this happen to me today with the same mag holder and an xds mag as well. I've been experimenting with it lately and today I was out hiking with a friend and I think my backpack pushed it out of there. I have one of these that works very well iwb or owb. I think I will go back to it or my neomag if I want to carry it in my pocket.

Go for it! I have one and fell in love with it. Speaking of the p320 does anyone know if the 17 round mag would fit this
http://www.amazon.com/SigTac-Magazine-Pouch-fits-SIGP226/dp/B00162TCBO

https://www.amazon.com/gp/aw/d/B004W2KRTG/ref=mp_s_a_1_7?ie=UTF8&qid=1481483197&sr=1-7&refinements=p_n_feature_keywords_browse-bin%3A2763711011&pi=AC_SX236_SY340_FMwebp_QL65&dpPl=1&dpID=51zIE-BU-JL&ref=plSrch

This one should work for you. They're also super easy to make out of a strip of elastic

I think it's a waste of time. Buy a few GI ammo cans (can be found cheaper elsewhere), and store your ammo in them. Maybe put a desiccant in there, but it's probably not necessary. I line my cans with cardboard and just put the ammo in there.

The lids have a gasket that is air tight. That ammo will outlast you. Honestly, it would probably outlast you just sitting on your closet shelf in the box you bought it in, but this provides some extra protection and allows you to more easily transport your ammo.

It’s made by TacStar. I picked it up on amazon for like 27$ with free shipping. https://www.amazon.com/dp/B001AMZXQI/ref=cm_sw_r_cp_api_3tnQBbFZJRVV1

They seem fine, but I'm not sure that they are a particularly huge step up over, say, something like this. Which holds five shells.

Don't use plastic ones, you don't want to shoot 200 rounds, get a plastic snap cap in there and then have it melt.

A-Zoom snap caps are pretty good

Training that out should be your first priority. Here's a good drill that can at least help you be aware of how much you're doing it: get some snap caps and bring them to the range. Have a friend randomly load a few mixed with live ammo in your magazine without your knowledge. Then, proceed to shoot as normal. You won't know whether you're getting live ammo or dummies and you'll notice your flinch when you expect a live round and get a dummy.

> it's someone helping out the community with a "hey, here's something I discovered!"

Well I didn't discover it. It was someone here in this sub talking about the 3V Gear Velox backpack who had one attached to it. Was someone on FB, and I went off to Amazon.. I thought I'd mention it since it works so well. Here's the Amazon link to make it easier.

The 5-groove barrel is the original barrel; they (and the 1903's) received 2-groove barrels when they were rearsenaled. Standard .30 cal cleaning: bore brush, cleaner, patches.

Get yourself some Stripper Clips and have fun running mad minutes.

Be sure to take the bolt apart and give the internals a look. You'll find a m6 fender washer helpful for not munching your fingers.

Hello friends, here’s a better deal on a similar product:
https://www.amazon.com/MTM-AC4C-Ammo-Crate-4-Can/dp/B01MU6ZAPG/ref=sr_1_1?crid=39CUD0NV6Q46K&keywords=mtm%2Bammo%2Bcrate&qid=1551214538&s=sporting-goods&sprefix=mtm%2Csporting%2C203&sr=1-1&th=1&psc=1

I haven't seen one that does, usually the ammo just comes loose in the brown paper packs of 20

EDIT: Correction, some polish ammo comes in stripper clips. You're better off buying Russian/Romanian surplus ammo and buying the clips on the side, I've been using these pretty well.

That's what I do and also recommend. I have a pocket clip but don't always use it depending on my pockets and magazine (if it has an extended baseplate and says sig on the bottom I keep it deeper in the pocket)

Only thing I recommend is you resist the urge to fidget with your mag while at home. I built up this unconcious habit of pulling out my mag and inspecting it while waiting for something to load on the computer at home and caught myself doing it once at a place where I shouldn't be pulling a loaded mag out of my pocket. No one noticed and I'll never do it again lol.

This one has good reviews and is made by Sig. :)

Here is what I have done after not shooting clays for a LONG time:

• Buy expensive over / under shotgun
  
• Get out-shot by old guy with crappy semi-auto (I don't have anything against semi's but this thing was BEAT) and son with your own Ithaca pump
  
• Hang head in shame...
  
  But seriously:
  
  
• Familiarize yourself with any equipment, microphones, control box, trap house, etc. Ask lots of questions! Help with setup and take-down
  
• Buy a shell pouch like this one
  
• Put your full box of shells in the inside pouch after ripping the "lid" off
  
• When you are shooting take shells off one row at a time, easy to keep track of when you have shot 5 shots and should prepare to move to next station
  
• Load one shell at a time into open barrel / magazine / chamber
  
• Do not load the weapon until it is your turn to shoot (with a pump don't rack slide until your turn, o/u / semi don't close until your turn)
  
• Be very familiar with loading and shooting one round at a time from your gun and unloading if need be
  
• Try to keep pace with previous shooter, don't spend two minutes fumbling around for the next shell
  
• Take your turn starting in the #1 spot - see counting above - you will lead the move
  
• If NOT using a semi and you miss more than you hit put your hit clay "emptys" in your pocket to keep score, if you hit more than you miss put your missed clay "empties" in your pocket to keep score put whatever ones you aren't keeping in the outside of your pouch
  
• When making the move from #5 to #1 walk BEHIND the other shooters
  
• Keep your gun pointed at the ground or towards trap house at all times - having your shit together with the shells helps with this
  
• If you leave emptys laying around be sure to clean up after yourself
  
• When done shooting for the session, reload the clay thrower! Always leave it fully loaded and everyone is happy
  
  Advice for the kids:
  
  
• 4 rules above all else
  
• Emphasizing that this is a team sport, and that everyone needs to know how the flow is going to go and to figure out their personal "mechanics" for making ready, loading, shooting, un-loading, etc while always keeping the gun pointed in a safe direction
  
• As far as the shooting itself, I don't feel qualified to offer more than this:
  
• Keep both eyes open
  
• Have a fairly aggressive stance - no leaning back
  
• Make sure they are holding the shotgun firmly against their shoulder
  
• Follow the clay, don't aim at it
  
• Don't tense up / jar themselves by yelling "PULL!" a slower / softer "Puullll" is better but sometimes doesn't work with the auto throwers
  
• Consistent cheek weld! Same "picture" of the barrel / bead is important
  
• If they hit clays and then have a string of misses they are probably starting to dissect and analyze - similar to golf - this appears to be my downfall at the moment
  
• Watch out for flinching, run some drills where you load an empty into the gun without them knowing
  
• Teach them the joy of cleaning their guns!
  
• Be smooth, shoot fast!
  
  Edit: Added some stuff

Pretty sure it is this one.

I know it's not from OP's website/deal but check this for some decent looking storage for your pmags: https://www.amazon.com/MTM-Tactical-Magazine-Storage-TMC15/dp/B00HVDFSQ0

The insert is sold separately for about half the price I believe if you want to wait and camelcamelcamel the items to get a better deal.

I wasn't haha...

http://www.amazon.com/Mosin-Nagant-pouch-Stripper-clip/dp/B000R845C4

Also a good set will allow a quick load of the magazine.

Hehe.. good job. Did you miss the three thirty round mags? 10 rd is in the AR.

This slips in well and will hold up to six http://www.amazon.com/gp/product/B0035J8CDA/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

To add to this, you can buy dummy rounds (typically red or a different color than brass). You can use these to safely practice loading, cocking, reloading, etc... They are also good for dry fire exercises.

http://www.amazon.com/-Zoom-Luger-Precision-Snap-Caps/dp/B0002IKANW/ is an example.

Yep, those are good to have! I stick my battery in the bag when charging and I also store them in the bag and the bag goes in an ammo can. I don't know if you have read this yet, but if you charge your battery to full, and you are not going to use them for a couple days, make use to use the "battery store" on the B6, it discharges the battery to a safe voltage to be stored. They shouldn't be stored at full charge for more then a couple of days.

Also, look into getting one of these. It lets you check each cells voltage. Sometimes the charger can screw up, so this is a cheap doulbe check to make sure the batteries are balanced. It also doubles as a warning buzzer for your quad. When you are flying, it will start to buzz when your battery gets down to a certain voltage so you do not discharge the battery too much, which also causes damage.

I think this might be what you're asking for.

Were it up to me, I'd grab one of their larger ammo cans (or an ammo crate if you've really stacked them deep) and just chuck my mags in there. The foam seems like it'd keep things a little neater, though.

it is on amazon for like 20 dollars called Condor MA37 Triple MP5 MP7 MP9 Magazine Pouch, I have a mp5 and a gbb kmp9 it fits all of these mags very tight

Would you expand on why you're choosing local?
I bought stripper clips from Amazon: they work as advertized, though I don't use them much.

I'll be watching the thread to see if anyone has a recommended scope mount.

You can buy snap caps to practice with as well: https://www.amazon.com/Zoom-Luger-Precision-Snap-Pack/dp/B0002IKANW

This way you can safely practice racking the gun and clearing malfunctions.


Oh, and don't forget the 4 universal rules of gun safety!

1. The gun is always loaded.
   
   
2. Always keep gun pointed in a safe direction.
   
   
3. Keep finger off trigger until ready to fire.
   
   
4. Know your target and what's behind it.

DIY Kit for 150.

The cheap alternative would probably be something like connecting cheap belts with belt pouches of some kind.

You could also ask around /r/cosplay. This cosplayer has put up a how to guide for the suit and the harness.

I don't run a dump pouch, so I have no personal experience. However, VISM makes a dump pouch. It's able to fit 8 18 round stick mags.

okay I was thinking this http://www.evike.com/products/25127/
as a helmet instead of the hat
heres a sling http://www.amazon.com/Yahill-Multi-Use-Adjustable-Outdoor-Hunting/dp/B017SET58I/ref=sr_1_3?ie=UTF8&qid=1464677823&sr=8-3&keywords=tactical+sling

a doublestrike holster https://www.hobbymods.net/products/custom3dnerf-doublestrike-holster

note:that backpack is barely a pound with all the gear in it im fine

I know ill prob buy a raider stock for that
a dump pouch
http://www.amazon.com/VISM-NcStar-Folding-Pouch-Black/dp/B007OZHIZO/ref=sr_1_3?s=hunting-fishing&ie=UTF8&qid=1464623878&sr=1-3&keywords=dump+pouch
im on the line about that tbh with the roughcut I have one but the sledgefire can handle rush's very well lets say someone is hiding behind cover out of ammo and I cover them and someone goes for a flank at 15 ft whould you rather have curved darts fly and hopefully circle back in for a hit or a triangle shaped projectile that goes straight that very hard to dodge but the roughcut you can just slamfire 8 darts into someone switch out do your double strike and do what you were doing

Apparently I use shotgun shell pouches for everything. The Apollo fits nicely in one of these with the divider removed.

thanks, just found the Lyman Shotshell Handbook 5th Edition for under $20.00

Snap caps and 50 rounds of .22lr?

Here's the caps:

http://www.amazon.com/A-Zoom-Luger-Precision-Snap-Caps/dp/B0002IKANW

On second thought you could get a nice little Kershaw knife for $20..

I really like these ones.

since you dont know the type of any of the componets you already have start from here. Start sticking to the loads listed and eventually you will learn what you can and cant change safely. A Lymans shotshell manual is great for learning process and tech information. It also has more load data than you can shake a stick at.

https://www.amazon.com/gp/product/B0082CWBCI/ref=od_aui_detailpages02?ie=UTF8&psc=1

Left leg had an extra molle pouch attached, right leg had a holster I made for the smart pistol

I just got this.

https://www.amazon.ca/gp/product/B01MU6ZAPG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

MTM's stuff is pretty good. Locks on both corners (if needed). Those ones I got are 30 cal ones (I can get 100 rounds of 12ga shotgun in them). I've also got 2 of their 50 cal ones.

I have one of the sheffield ones you linked to, but it doesn't stack well with the MTM ones.

I like this one.

Get somthing like this. Shotshell is a diferent animal than metalic cartridges.

A-Zoom 9mm Luger Precision Snap Cap 5 Pack https://www.amazon.com/dp/B0002IKANW/ref=cm_sw_r_cp_apa_2l76ybTBA8XF3

Better safe than sorry. Or I'm a chump that wasted $15 🤷

It sure is, here you go :)

Mako Polymer Pouch
http://www.amazon.com/Mako-Polymer-Magazine-Pouch-Magazines/dp/B004O6CBSA/ref=sr_1_1?ie=UTF8&qid=1371690872&sr=8-1&keywords=ar+15+magazine+pouch
I love it!

edit: note the retention is not the best, good for range/play use but the mag might fall out when crawling on ground.

I use hard containers like this MTM AC4C Ammo Crate (4-Can)

You might be able to jury rig one out of this: http://www.amazon.com/gp/product/B0082CWBCI?keywords=drop%20leg%20platform&qid=1450164222&ref_=sr_1_1&sr=8-1

That said, it'll probably hit your arm as you try to walk around.

Another option is to go with a soft leather back quiver (like a Howard hill style quiver). It'll compress against your back and hold the arrows in place so it doesn't rattle around when you're moving!

I used to use a hydration pack on a back harness as a quiver as well: http://imgur.com/nX6YQUz

It did the job well of holding the arrows in place and for $30, it was a darn good quiver. The only problem is that the arrows sat high on my back so trying to get through trees/brush was an absolute nightmare as the arrows snagged onto every low hanging branch

I got you, fam.

These are actually clips-

http://www.amazon.com/Mosin-Nagant-pouch-Stripper-clip/dp/B000R845C4

The mtm stackable plastic ammo cans.

These but they were around $20 when I got em.

I have this one on my 590A1. It's the TacStar 6 shell side saddle.

Don't let your dreams be your dreams.

I'd try here: http://www.amazon.com/Lyman-Shotshell-Handbook-5Th-Edition/dp/B00162MK2M

I use these with a desiccant packet thrown in each for all my ammo storage:

https://www.amazon.com/MTM-AC4C-Ammo-Crate-4-Can/dp/B01MU6ZAPG/ref=mp_s_a_1_6?keywords=ammo+storage&qid=1568835081&s=gateway&sr=8-6

MTM Tactical Mag Can 15 for 223/5.56 Magazine Storage TMC15: https://www.amazon.com/dp/B00HVDFSQ0/ref=cm_sw_r_cp_taa_mee5CbYM6MD3M

https://www.amazon.com/MTM-AC4C-Ammo-Crate-4-Can/dp/B01MU6ZAPG/ref=sr_1_15?keywords=ammo+can&qid=1558490220&s=gateway&sr=8-15

https://www.amazon.com/MTM-Tactical-Magazine-Storage-TMC15/dp/B00HVDFSQ0

Get some of these.

I also lik te these 30 cal ammo cans by MTM:

https://www.amazon.com/MTM-AC4C-Ammo-Crate-4-Can/dp/B01MU6ZAPG/ref=sr_1_1?dchild=1&hvadid=77721780049627&hvbmt=be&hvdev=c&hvqmt=e&keywords=mtm+30+cal&qid=1574658723&sr=8-1

http://www.amazon.com/Caliber-Waterproof-Storage-Military-Manufacturer/dp/B000J4HXUC

You can generally get ammo cans in the US at military surplus stores, which will generally look a bit aged, or order a new one online for ~$30.

use these

MTM AC4C Ammo Crate (4-Can) https://www.amazon.com/dp/B01MU6ZAPG?ref=ppx_pop_mob_ap_share

https://smile.amazon.com/MTM-Tactical-Magazine-Storage-TMC15/dp/B00HVDFSQ0/

Actually, that one was on my wishlist, but this one is the one OP meant:
https://smile.amazon.com/MTM-Tactical-Magazines-Magazine-TMCLE/dp/B019LIO7V4/

Would a shooters bag work for you? It is typically used for skeet/trap shooting, but I think you could fit about 10 beers in there. They're meant to carry a decent amount of weight (50 shells at least). I would use a cold pack though, it's not waterproof, so ice would be messy.

Gives a whole new meaning to "shotgunning beer"!

I've been using these: https://smile.amazon.com/gp/product/B01MU6ZAPG and will move some to akro bins for when I'm actually reloading.

It's a SpeedQB Molle-Cule belt. The pouches on the belt are slightly modified Condor MA37 pouches.

Try these

Dude, getcha some snap caps instead of chambering live rounds for practice.

Here is the mobile version of your link

Shotgun shell bandolier. 56 rounds. Or in this case 56 15ml bottles for dripping on the go. Not sure which you want to carry out with you? Carry them ALL!

For sure, because it's dangerous. But you can buy snap caps and do it in your house or find an outdoor range to practice for real.

It isn't so much an ammo type as it is a training device.

Snap caps allow you to consistently dry fire without damage to your firearm if it's of an older make. Also allows you to simulate a dud round, or - as OP has discovered - control against flinching to anticipated recoil.

Snap cap drills helped me immensely. Subcompact barrels really exaggerate that flinch, which makes your shots go all over the place.

Video of a chick doing them.

You can also do that penny drill with the snap cap by putting the flat side (where the primer is) on your front sight.

Get a holster for the pistol, sling for the rifle, and belt mounted holders for the magazines.

I do some informal "2 gun" and for pistol I use a Safariland paddle holster for my P226, and Sig's double mag holder for the pistol magazines. For rifle, I used to borrow a friend's "dump pouch" and carried magazines in there, but I found and switched to these AR mag holders: https://www.amazon.com/gp/aw/d/B004O6CBSA/ref=yo_ii_img?ie=UTF8&psc=1

[You could go to the plastic side for $12.] (http://www.amazon.com/Condor-Triple-Mp5-Mag-Pouch/dp/B00865O638/) Be warned that Gunnit will shame you, but for $12, why not.

It's just This with two of these

and my dump pouch.

Medics bag, $8usd. Very tough for pointy objects like broken glass, metal, old knives, etc.

I was also looking at shotshell pouches, which often have 2 compartments and are sturdy canvas. About $20.

assuming you are loading factory 9mm Luger ammo (aka 9x19mm) this should not happen.

things I would check:

make sure it's assembled correctly. not a lot to go wrong here, I don't know if you could even put it back together wrong, but I am sure there are videos to guide you in insuring you got it right.

once loaded, pull the slide all the way back, and let it fly. don't pull it back, wait, and let it go. pull it back all the way and let it go all in one movement. if you are nervous about live rounds, get some snap caps. I use snap caps for dry firing, they are worth it just to have around.

I personally use AZoom brand snap caps for 3 different calibers right now. I’m on mobile but here’s ugly link for Amazon.

https://www.amazon.com/ZOOM-15116-Luger-Precision-Snap/dp/B0002IKANW/ref=mp_s_a_1_2?adgrpid=60126321110&dchild=1&gclid=Cj0KCQiAq97uBRCwARIsADTziyYd4ypBPzhg5nrX-Ci4fPgeA_CaHIb7ij6dnvBQ4oHe3d5v1Q4ASgEaAqJXEALw_wcB&hvadid=274715289035&hvdev=m&hvlocphy=1014166&hvnetw=g&hvpos=1t2&hvqmt=e&hvrand=17789535978156672764&hvtargid=kwd-301384168054&hydadcr=9851_9624876&keywords=a-zoom+9mm+snap+caps&qid=1574474801&sr=8-2

Low profile:

Claw Gear KD One Belt

HSGI Pistol TACO 2x with rifle, 4x if running Glock Primary

HSGI Rifle TACO 2x or none if running Glock Primary

Dump Pouch

Holster

Molle Adapter, optional

Knee Pads, optional

Allows me to be a speedy boi.

Only downside is no nipple protection.

ninja edit: doormatting

If you are worried about damaging the firing pin dry firing the solution is SNAP CAPS


https://www.amazon.com/Zoom-Luger-Precision-Snap-Pack/dp/B0002IKANW/ref=sr_1_1?ie=UTF8&qid=1498161694&sr=8-1&keywords=snap+caps