Reddit mentions: The best automotive assembly lubricants
We found 19 Reddit comments discussing the best automotive assembly lubricants. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 9 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Liquid Wrench Gunk L112/6 Super Penetrant Spray - 11 oz, Gray
- Liquid Wrench 1 lubricant aerosol, 11 oz.
- Solid block desiccant core: A composite of molecular sieve and activated
- This is manufactured in United States
- A versatile multi-use penetrant
- Contains a precision spray straw
- A versatile multi-use penetrant
- Contains a precision spray straw
- Fast penetrating solvent
- Loosens rusted nuts, bolts and parts in a few minutes
- This item is not for sale in Catalina Island
Features:
Specs:
Color | Gray |
Height | 8 Inches |
Length | 3 Inches |
Number of items | 1 |
Release date | September 2018 |
Size | One Each, 11 oz. |
Weight | 0.94 Pounds |
Width | 3 Inches |
2. Permatex 81950 Ultra Slick Engine Assembly Lube, 4 oz., 4 Ounce
- Adheres to component surfaces to prevent scuffing and galling during initial start-up
- High quality formulation meets OEM performance specs for engine assembly lubricants
- Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine
- Suggested Applications: Engine bearings, camshafts, lifters, valves, guides and rocker shaft assemblies
Features:
Specs:
Color | Red |
Height | 1 Inches |
Length | 6 Inches |
Number of items | 1 |
Size | 4 Ounce |
Weight | 0.25 Pounds |
Width | 1.49 Inches |
3. Liquid Wrench L106 Penetrating Oil, 5.5 Oz
LIQUID WRENCH is a local family owned company based out of Charlotte, NC. For more than 75 years, LIQUID WRENCH products, developed by the people who use them, has earned the trust of hard-working tradesment and the active DIYer through consistent, superior performance and a commitment to innovation...
Specs:
Color | _ |
Height | 1 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | One Each, 5.5 oz. |
Weight | 4 Pounds |
Width | 1 Inches |
4. 3-IN-ONE 10041 Professional Silicone Spray Lubricant, 11 Oz.
- Silicone lubricant provides a protective, waterproof, and low-friction coating to surfaces
- Quick-drying formula resists high temperatures and wet environments
- Lubricant can be applied to metal, rubber, wood, and vinyl
- Recommended applications include locks, hinges, and sparkplug wires
- Included straw creates a precision stream of grease for controlled application
Features:
Specs:
Height | 8 Inches |
Number of items | 1 |
Size | 11 Oz. |
Weight | 0.93 Pounds |
Width | 3 Inches |
5. Genuine Honda 08798-9002 Urea Grease
genuine oem factory partexact fitdurablebest in qualitythis is not an aftermarket partOEM
Specs:
Height | 2.5 Inches |
Length | 6.2 Inches |
Number of items | 1 |
Width | 2.5 Inches |
6. 3-IN-ONE All-Temperature Silicone Drip Oil, 4 OZ
- When you need a fast-drying, no-mess lubricant that works in extreme temperatures, you can count on this All-Temp Silicone
- Lubricates, waterproofs and protects in temperatures between -100°F to 500°F
- Safely works on multiple surfaces, including plastic, metal and rubber
- Dries quickly and leaves no messy residue. Squeeze bottle design offers control over the amount of lubricant dispensed. Size is ideal for Automotive, Marine, Home, and Shop use
- Marksman Twist Spout makes it easy to use and apply product exactly where you want it
Features:
Specs:
Color | light brown |
Height | 7 Inches |
Length | 2 Inches |
Number of items | 1 |
Size | 1-Pack |
Weight | 0.26 Pounds |
Width | 3 Inches |
7. ECL The Original, Mil Spec. CHRISTO-LUBE MCG 111, 2 oz. Tube
High Performance PFPE Based LubricantOxygen Compatible GreaseMeets the specification requirements and has been qualified under Military Specification MIL-PRF-27617F Types I, II and IIIHas been adopted as the preferred oxygen compatible or enriched air (Nitrox) lubricant by most breathing apparatus e...
Specs:
Weight | 0.000625 Pounds |
8. VW AUDI SUNROOF TRACK GREASE LUBRICANT
Grease for use on VW and Audi sunroof tracks.
Specs:
Number of items | 1 |
Weight | 90 Grams |
9. Genuine GM Fluid 88900330 Limited Slip Axle Lubricant Additive - 4 oz.
Reduces frictionQuiets noise in the rear axleRequired for passenger carsUse in limited-slip axlesSee service manual for vehicle application
Specs:
Color | N/A |
Height | 1.4 Inches |
Length | 4.7 Inches |
Release date | February 2013 |
Size | 4 Ounce |
Weight | 0.25 Pounds |
Width | 2.6 Inches |
🎓 Reddit experts on automotive assembly lubricants
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where automotive assembly lubricants are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I switched from Super Lube (which is great, I use it everywhere) to Permatex Ultra Engine Assembly Lube aka Red Lube of Love for my higher tooth-count ratchets. That stuff is extremely slick and sticky. Rats glide effortlessly, noticeably better than Super Lube. However, it is more quiet, so if you're the kind who feels or listens for the clicks you may not like it as much.
The hood latches tend to seize up over time, especially if you don't lubricate them occasionally. Had the same problem on my Mk5 Jetta. If it's seized and not a broken cable, you can generally fix it pretty easily.
You need three things: a small screwdriver, a can of lightweight break-free lube like Liquid Wrench or PB Blaster penetrating oil, and a can of spray lithium lube.
Pop the safety latch and prop the hood. Locate the hood latch assembly. Using the precision tube on the spray lube, saturate the inside of the latch and latch plate with the penetrating oil (try to keep overspray from rubber parts). Let sit for 30 seconds or so, and then press on the open side of the latch with the screwdriver until the latch plate releases and locks. Pull the hood release in the cabin to reset. Repeat several times until the latch snaps closed freely when you press on it with the screwdriver. Respray with penetrator if necessary.
Use a shop towel to mop up as much penetrating oil as you can and spray the entire inside of the latch assembly with as much spray lithium as it will hold. Work the mechanism a few more times to get it into the pivot and latch plate as much as possible. Re-saturate with lithium grease and button up.
Every time you change your oil, you should relubricate the hood latch with spray lithium to keep this from happening.
EDIT: Linkies.
Yeah, I'm restoring mine for a high school project and It's surprisingly easy, even without any mechanical knowledge, to repair these bikes. They're very simple and you can buy tons of reproduction parts from this website. Just get some metric wrenches, this, this, and download this. Welcome to the club, don't be an asshole.
EDIT: Can you link the CL ad?
I've actually found stuff like this works better for squeaking hinges. Specifically a squeeking garage door. I sprayed WD on the hinges between the panels, and it wore off after 2 or 3 openings/closings. The silicone spray lasted for months before needing another shot.
For someone who touts using the correct tool all the time, watching that made me want to punch him. Use a piston ring compressor, piston ring tool, and a proper valve spring tool. He should also be giving up on his clean hands and put some oil on various parts of the engine while reassembling.
I wouldn't be spraying WD-40 onto the window itself. I would spray it on the little rubber track that the window follows as it rolls up. I would spray WD-40 into the crevasse.
Maybe I should just use this or a similar product?
Thanks.
Live and learn, right? You should be able to get the glue off using a penetrating oil. Liquid wrench has good reviews, and won't eat the paint off your car.
Hard to beat the price and shipping of Amazon IMO.
High temp urea grease I believe it is called this is the stuff Honda recommends at least, http://www.amazon.com/Genuine-Honda-08798-9002-Urea-Grease/dp/B00BFDFYKW
I also forgot that if you're working on a old bike like that, go and get some Liquid Wrench. Use it on all your rusty nuts and bolts before you start working on something.
3-IN-ONE All-Temperature Silicone Drip Oil 4 oz
O2 compatible lube such as this - https://www.amazon.com/CHRISTO-LUBE-MCG-111-oz-Tube/dp/B00BIQ7SD2
https://www.amazon.com/AUDI-SUNROOF-TRACK-GREASE-LUBRICANT/dp/B006R5QI4Y
https://www.amazon.com/AUDI-SUNROOF-TRACK-GREASE-LUBRICANT/dp/B006R5QI4Y
ACDelco makes an additive for those differentials that's usually included with the seal and lube kit. It might be all that's needed.
https://www.amazon.com/Liquid-Wrench-L106-Penetrating-Oil/dp/B00200MR8Q
Hmmm, have you tried spraying some Liquid Wrench or other similar product on it?
http://www.amazon.com/gp/aw/d/B000ZZWNYG
Amazon carries it, but any local auto supply store should carry it.
Get some penetrating oil and spray the bolts or screws in advance. https://www.amazon.com/Liquid-Wrench-L106-Penetrating-Oil/dp/B00200MR8Q or some other brand is fine