Reddit mentions: The best wheel bolts
We found 5 Reddit comments discussing the best wheel bolts. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 4 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. SING F LTD 2 x 10mm Threads Gas Strut Ball Stud Bolts M8 8/18 Struts Fastener
- Perfect for use with gas struts, making up bonnet lifters etc.
- Used in conjunction with lift supports and ball socket connectors
- 2 x ball stud bolts
- Ball diameter:10mm
- Thread:M8
Features:
Specs:
| Weight | 0.0881849048 Pounds |
2. Prime Ave PA (10) Extended Length Wheel Lug Bolts Cone Seat 14X1.5 Thread Size (28mm Shank, Black)
Includes 10 Brand New Premium Lug BoltsM14 x 1.5 Thread Size | Cone Seat | 17mm HexHeat treated & through hardened alloy steel | Zinc coating for maximum durability & protection against corrosionTÜV Tested & Certified to meet or exceed OEM quality standards | Manufacturer Warranty Included
▼ Read Reddit mentions3. Prime Ave PA (20) Cone Seat Wheel Lug Bolts in Chrome ~ Thread Size 12X1.5 | 40mm Shank | 17mm Hex
- Size: 16ga(1.2mm),2.4 inch long(60mm). Thread is 0.9mm To accept a 1.2mm internally threaded shaft/bar.Attention: 0.8mm thread bar is unavailabe.316L Implant Grade Stainless Steel Material.(sold individually)
- Feature: the pin has a thread at the end which threads into the shaft of the body jewlery. This insertion pin is available for internally threaded shaft/bar measuring 1.2mm.
- Function: you can screw on body piercing jewelry first and then pull the pin through piercing hole.At last left the body jewelry in the piercing hole.
- Advantage: ① more safe than acrylic tapers which hold bacteria or difficult to heal your ears. ② more smooth and less painfull when shaft/bar push into piercing hole. ③ This taper can be reinsert body jewelry into a piercing hole that had shrunk a bit with this one.
- This taper can be autoclaved and reused as more comfortable and durable .
Features:
Specs:
| Is adult product | 1 |
4. Ceco Black Spline Drive Tuner Bolt Installation Kit (20 Lug Bolts & 1 Key) 14x1.50 R.H. Thread Pitch 1.1" Thread Length
- 14x1.50 R.H.
- Black
- 60 Degree Cone Seat 1.1" Thread Length
- 6 Spline Dual Hex 19mm & 21mm Key
- These bolts have a thread length of 1.1" and are made for aftermarket cone seat wheels only, NOT for use on OEM wheels on Volkswagen, Audi or Mercedes Benz. Please verify the thread length needed and the seat on your wheels before ordering. Tuner Installation Kits should be torqued by hand only.
Features:
Specs:
| Color | Black |
| Height | 4.73 Inches |
| Length | 1.58 Inches |
| Weight | 4.06 Pounds |
| Width | 6.3 Inches |
🎓 Reddit experts on wheel bolts
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where wheel bolts are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Interested in what Redditors like? Check out our Shuffle feature
Shuffle: random products popular on RedditTop Reddit comments about Wheel Bolts:
Summary
1. SING F LTD 2 x 10mm Threads Gas Strut Ball Stud Bolts M8 8/18 Struts Fastener
- Perfect for use with gas struts, making up bonnet lifters etc.
- Used in conjunction with lift supports and ball socket connectors
- 2 x ball stud bolts
- Ball diameter:10mm
- Thread:M8
Features:
Specs:
| Weight | 0.0881849048 Pounds |
2. Prime Ave PA (10) Extended Length Wheel Lug Bolts Cone Seat 14X1.5 Thread Size (28mm Shank, Black)
Includes 10 Brand New Premium Lug BoltsM14 x 1.5 Thread Size | Cone Seat | 17mm HexHeat treated & through hardened alloy steel | Zinc coating for maximum durability & protection against corrosionTÜV Tested & Certified to meet or exceed OEM quality standards | Manufacturer Warranty Included
▼ Read Reddit mentions3. Prime Ave PA (20) Cone Seat Wheel Lug Bolts in Chrome ~ Thread Size 12X1.5 | 40mm Shank | 17mm Hex
- Size: 16ga(1.2mm),2.4 inch long(60mm). Thread is 0.9mm To accept a 1.2mm internally threaded shaft/bar.Attention: 0.8mm thread bar is unavailabe.316L Implant Grade Stainless Steel Material.(sold individually)
- Feature: the pin has a thread at the end which threads into the shaft of the body jewlery. This insertion pin is available for internally threaded shaft/bar measuring 1.2mm.
- Function: you can screw on body piercing jewelry first and then pull the pin through piercing hole.At last left the body jewelry in the piercing hole.
- Advantage: ① more safe than acrylic tapers which hold bacteria or difficult to heal your ears. ② more smooth and less painfull when shaft/bar push into piercing hole. ③ This taper can be reinsert body jewelry into a piercing hole that had shrunk a bit with this one.
- This taper can be autoclaved and reused as more comfortable and durable .
Features:
Specs:
| Is adult product | 1 |
4. Ceco Black Spline Drive Tuner Bolt Installation Kit (20 Lug Bolts & 1 Key) 14x1.50 R.H. Thread Pitch 1.1" Thread Length
- 14x1.50 R.H.
- Black
- 60 Degree Cone Seat 1.1" Thread Length
- 6 Spline Dual Hex 19mm & 21mm Key
- These bolts have a thread length of 1.1" and are made for aftermarket cone seat wheels only, NOT for use on OEM wheels on Volkswagen, Audi or Mercedes Benz. Please verify the thread length needed and the seat on your wheels before ordering. Tuner Installation Kits should be torqued by hand only.
Features:
Specs:
| Color | Black |
| Height | 4.73 Inches |
| Length | 1.58 Inches |
| Weight | 4.06 Pounds |
| Width | 6.3 Inches |
Got mine from amazon, make sure you check to see if your wheels need conical or spherical lug bolts. (Stock is spherical)
PA (10) Extended Length Wheel Lug Bolts Cone Seat 14X1.5 Thread Size (28mm Shank, Black) https://www.amazon.com/dp/B01N0TLUQW?ref=yo_pop_ma_swf
Ball Stud Bolt.
Take it to Lowes to find the right size or order online.
SING F LTD 2 x 10mm Threads Gas Strut Ball Stud Bolts M8 8/18 Struts Fastener https://www.amazon.com/dp/B01MYGEQQX/ref=cm_sw_r_sms_c_api_i_TfhpDbF3XAKWS
How long do you need? Here are some 40mm shank M12x1.5 lug bolts (The stocks are 25.5mm IIRC)
I'll chime in here.
I have the Alzor 349's on my MKVI, and so far haven't had any issues whatsoever. I had them road force balanced, which was a bit pricier, but there's absolutely no steering wheel shudder or vibrations because of that.
I would say the only two things I did is make sure I had the correct lug bolts (OEM are Ball Seat, Alzors are Conical), and to get aluminum hub adapters instead of the plastic ones that are provided.
I have one gripe, though, and that is that the center caps are a non-standard size and I'm having a bitch of a time finding VW center caps that actually fit. So far, I've ordered some from Amazon, only to have them be the wrong size, and center cap stickers that were of horrible quality.