Reddit mentions: The best bathroom hardware
We found 270 Reddit comments discussing the best bathroom hardware. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 171 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. EZ-Load Toilet Paper Holder
- Spring hinges on both sides makes loading toilet paper a snap
- Durable plastic construction ensures long product life
- Hardware and installation instructions included
- Designed to install in any washroom
- Measures approx 6½"W X 3¼"H X 3 3/4"D
Features:
Specs:
Color | Red |
Height | 3.75 Inches |
Length | 7 Inches |
Width | 4.75 Inches |
2. Command Large Double Bath Hook, Satin Nickel, 1-Hook, 1-Large Water-Resistant Strip, Organize your dorm
- INCLUDES – 1 hook, 1 strip
- DAMAGE-FREE BATHROOM ORGANIZATION- Keep your bathroom organized both in and out of the shower.
- NO TOOLS REQUIRED- Water-resistant adhesive strips are tested and proven to hold better than suction cups in wet, hot and humid conditions, keeping the things you need within reach.
- STRONG AND VERSATILE- Tested and proven to hold better than suction cups in wet and humid conditions. Great for hanging towels, robes, loofahs, or any other bath accessory you can think of.
- REMOVES CLEANLY- Holds strong and removes clean from many surfaces including glass, mirrors, tile, fiberglass, wood, and painted surfaces. No holes. No sticky residue.
Features:
Specs:
Color | Satin Nickel |
Height | 6.75 Inches |
Length | 2 Inches |
Number of items | 1 |
Release date | August 2017 |
Size | Satin Nickel |
Weight | 0.10275 Pounds |
Width | 4.313 Inches |
3. Moen DN8408CH Preston Collection Single Post Toilet Paper Holder, Chrome
VERSATILE DESIGN: Chrome finish is highly reflective for a mirror-like look that works with any decorating styleFLEXIBLE PLACEMENT: For use in the bath as well as the kitchen for hanging towels and moreEASY CHANGE: Open design allows for easy roll changesPEACE-OF-MIND: Designed for hassle-free insta...
Specs:
Color | Chrome |
Height | 0.99 Inches |
Length | 12.331 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 1.3 Pounds |
Width | 4.063 Inches |
4. Zenna Home Toilet Paper Reserve, Chrome
CONVENIENT TOILET PAPER STORAGE: Freestanding toilet paper holder fits into your bathroom exactly where you want itHOLDS MORE: Stores up to 3 rolls of toilet paperRESISTS RUST: Attractive chrome finish is rust resistantKEEPS STORED TOILET PAPER OFF FLOOR: Balled feet add a visual touch and keep stor...
Specs:
Color | Chrome |
Height | 15 inches |
Length | 5.63 inches |
Number of items | 1 |
Size | 3 Rolls |
Weight | 0.65 Pounds |
Width | 5.63 inches |
5. Blauberg UK TURBO-150 Blauberg Turbo Mixed Flow in Line Extractor Fan 150 mm 1 Grey
High power extractor fan that fits Standard 150 mm or 6 " solid or flexible ducting.Use for extracting air from toilets, bathrooms, hobby rooms, sheds & workshopsUp to 560 m3/H extract airflow rate with a high pressure mixed flow impeller.German blauberg long life 240 V mains voltage 50 W motor. 46 ...
Specs:
Color | Gray |
Height | 12.204724397 Inches |
Length | 9.842519675 Inches |
Size | 150 mm |
Width | 11.81102361 Inches |
6. BeraTek Industries Power Perch Single Wall Outlet Shelf. Home Wall Shelf Organizer for Outlets. Perfect for Bathroom, Kitchen, Bedrooms with Cord Management and Easy Installation. White 1-Pack
MAXIMIZE SPACE. Perfect for saving space in any room, Power Perch allows you to create an extra shelf in seconds using your existing outlet cover. Hold items up to 10 lbs for toothbrushes, electronic devices, and smart speakers such as Google Home & Amazon Echo.EASY TO INSTALL. Easily transform clut...
Specs:
Color | White |
Height | 4.9999999949 Inches |
Length | 5.99999999388 Inches |
Size | 1 Pack |
Weight | 0.15 Pounds |
Width | 3.99999999592 Inches |
7. KES Self Adhesive Toilet Paper Holder Stainless Steel Tissue Paper Roll Towel Holder RUSTPROOF Brushed Finish, A7070-2
- Self Adhesive Strip: Quick and easy mounting. Strong adhesiveness and waterproof. No drill holes needed. Remove easily and no trace left behind. Suitable for bathroom and RV.
- Rust Proof: Constructed of Type 304 premium grade stainless steel, with added 18/8 Chromium/Nickel content to protect against corrosion and rust. Suitable for humid environments such as bathrooms and kitchens.
- Fits Most Paper Roll Sizes: Effective arm length 5.2 inches. Open-sided, swing arm design makes roll changing quick and easy (opening can face either left or right). A short pin at the end of the arm prevents the paper roll from slipping off.
- Applicable Surfaces: Clean, dry, and smooth wall surfaces such as ceramic tiles, marble stone, metal, glass, etc. Make sure to clean and dry the wall surfaces before installation. Not recommended for painted, wallpaper, or uneven surfaces.
- Durable and Safe: All stainless steel constructions, ensuring long service life. No sharp edges. Dimensions: 1.7 inches (height) by 3.3 inches (width)
Features:
Specs:
Color | Brushed Grey |
Height | 0.004 Inches |
Length | 5.787401569 Inches |
Number of items | 1 |
Weight | 0.57 Pounds |
Width | 4.212598421 Inches |
8. APLusee Toilet Paper Holder with Phone Shelf Brushed Nickel, Bathroom Accessories SUS 304 Stainless Steel Tissue Roll Dispenser Storage Wall Mounted
HIGH QUALITY CONSTRUCTION SUS304 stainless steel, great practical value & well made with nice brushed surface. Handy and Stylish. Sturdy enough with heavy weight: 1.19 lbs. (542 g)LARGER SAFE PHONE SHELF maximumly suits iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max or any big smartphone...
Specs:
Color | Brushed Nickel |
Height | 4.7 Inches |
Length | 5.3 Inches |
Weight | 1.12 Pounds |
Width | 3.1 Inches |
9. Hornady 050095 Cam Lock Bullet Puller
- Great Tool for Reloaders - keep this Hornady Cam Lock Bullet Puller 050095 handy for a fast and easy way to pull bullets with your press. Mounts to any press with standard 7/8 -14-inch threads and uses Hornady Collet Only (sold separately). Not for use with cast bullets
- Why Do I Need a Hornady Bullet Puller - because mistakes happen, so be prepared. Whether you are fixing mistakes from incorrectly handloading cartridges to taking apart factory manufactured cartridges, this tool will help you salvage the bullets, brass, and powder with no damage or spillage
- Quick & Easy to Use - simply place the cartridge into the reloading press, raise the cartridge into the puller, clamp the puller down on the bullet, raise the press arm and presto, the bullet is out. Once you have your settings in properly, you can begin to pull dozens of bullets. Intended for rifle cartridges only
- Caliber Size Specific Collets - keep several appropriate collets for each caliber size range of bullets you intend to pull at your reloading bench for the appropriate fitting. There are thirteen different collets that will pull most any bullet, from 17 caliber through 458 caliber, except a flush seated wad cutter
- Four Main Components - this Hornady collet bullet puller is constructed with a cam lock die body, size specific COLLETS which are SOLD SEPARATELY, the plunger, and cam lock handle assembly lever
Features:
Specs:
Color | Red/Black |
Height | 2 Inches |
Length | 9 Inches |
Number of items | 1 |
Size | 1 Pack |
Weight | 0.45 Pounds |
Width | 2 Inches |
10. KES Bathroom Lavatory Double Glass Shelf Wall Mounted Floating, Rustproof Brushed SUS304 Stainless Steel, BGS2202B-2
- ALL HARDWARE AND INSTRUCTIONS INCLUDED - You can find detailed installation instructions from product pictures. You can contact KES for step by step guidance if you need any help. Set screws (for glass shelf) and wall-mounting screws are all included, no need to purchase extra hardware.
- RUSTPROOF - Bathroom shelf constructed of Type 304 premium grade rust proof stainless steel, with added 18/8 Chromium/Nickel content to protect against corrosion & rust, suitable for humid environment such as bathroom and kitchen.
- EXTRA-THICK (6MM) TEMPERED GLASS (CLEAR) - Safe use & kid-friendly. When broken, it crumbles into small granular chunks instead of splintering into jagged shards as plate glass does, less likely to cause injury.
- DIMENSIONS: 13.8 x 5.1 x 12.4 INCHES (W x D x H). 9.25 Inch distance between two shelves. It provides huge storage space, is great for big volume shampoo, such as L'Oreal Paris 591ml, OGX 750ml, Tea Tree 500ml, etc. Max. load: 22 lbs (10 KG), Screw-Mount on Concrete Wall.
- MAX. LOAD 10 kg/22 lbs - Solid stainless steel construction, sturdy design.
Features:
Specs:
Color | Brushed |
Height | 12.4 Inches |
Length | 5.1 Inches |
Weight | 5 Pounds |
Width | 13.8 Inches |
11. RCBS Advanced Powder Measure Stand
RCBS ProductPowder Measure & AccessoriesPowder Handling Tools & AccessoriesWill raise most Powder Measures 9-1/2˝ (with standard 7/8”–14 thread)Leaves space for positioning a powder scale pan or cases in a loading block under the drop tubeBolts easily to a reloading bench or tableAlso serves as...
Specs:
Color | Multi |
Height | 3.1 Inches |
Length | 12.5 Inches |
Number of items | 1 |
Release date | February 2011 |
Weight | 0.13 Pounds |
Width | 5.9 Inches |
12. Ebros Gift Giant Ocean Kraken Cthulhu Octopus Toilet Paper Holder Bathroom Wall Decoration 8.75" L Figurine
- Could your bathroom use a bit of mysterious nautical ambiance? This Cthulhu Kraken Octopus toilet paper holder will bring you right into the heart of the vast deep ocean!!!
- This Cthulhu Kraken wall mounted toilet paper holder measures 8.5" tall, 8.75" long and 4.75" deep approximately. It weighs about 2 pounds.
- Individually hand-crafted from cold cast resin with plastic roller and metal mounting plate.
- Because our polyresin products are individually hand-crafted, colors may vary slightly from what is pictured here.
- Soda can in the photos are not included with the item as they are meant to provide size perspective of the sculpture.
Features:
Specs:
Color | Octopus |
13. Danze D444006 Lily Toilet Paper Holder, Chrome
- Sleek modern design
- Available Fall 2013
- Mounting hardware included for easy installation
- Solid brass construction Warranty:
- Danze Bath Accessories are covered by a manufacturer’s limited "lifetime" warranty on finish and manufacturing defects
Features:
Specs:
Color | Chrome |
Height | 2.187 Inches |
Length | 2.5 Inches |
Number of items | 1 |
Size | 3"W x 5 1/8"D x 10"H |
Weight | 0.55 Pounds |
Width | 6.69 Inches |
14. SONGMICS bamboo bathroom shelves, 3-Tier Adjustable Layer Rack, Bathroom Towel Shelf, Utility Storage Shelf Rack, Wall Mounted Organizer shelf, For Bathroom Kitchen Living Room Holder Natural UBCB13Y
- Just the Ticket for Bathrooms: Need a storage solution for shower gels, tissue paper, and shampoo bottles? Try this 3-tier bamboo rack! It will help organize your toiletries nicely while lending a fresh appeal to your bathroom
- Float or Stand? It’s up to you! Bothered about limited space and want to float everything on the wall? No problem. It also works great as a free-standing rack for easy access to the items on it
- Higher or Lower Distance? With 3 shelves and 5 sets of holes, you can adjust the shelf distance as you need; gone are the days of not being able to place items of different heights on one storage rack
- Not Just for Bathrooms: Put it in the kitchen for spice jars; use it in the living room for knickknacks; keep it for potted succulents on the balcony. It always comes in handy wherever you place it
- What You Get: A 3-tier bamboo storage rack to keep your bathroom necessities under control and smooth out your morning routine
Features:
Specs:
Color | Natural |
Height | 21.3 Inches |
Length | 23.6 Inches |
Number of items | 1 |
Size | 23.6’’ x 5.9’’ x 21.3’’ |
Weight | 5.1 Pounds |
Width | 5.9 Inches |
15. iDesign BPA-Free Plastic Wall Mount Paper Towel Holder - 13.5" x 0.75" x 5", White
WALL MOUNT PAPER TOWEL HOLDER: Keeps paper towels clean, dry, and off the counter until ready for use and accommodates most standard, mega, and jumbo sized rollsMULTIPLE HANGING OPTIONS: Versatile design can be mounted to the wall or under cabinets, and it can be used in any room around the home whe...
Specs:
Color | White |
Height | 4.9 Inches |
Length | 0.7 Inches |
Weight | 0.3 Pounds |
Width | 13.6 Inches |
16. Ultra Faucets UFA31020 Transitional Collection Toilet Paper Holder, Chrome
Solid brass construction and beautiful design add a touch of class to any bathroom décor.A wide range in design and color choices means you always get what fits your bathroom the best.This Transitional Collection toilet paper holder brings a finished look to your bathroom when combined with other T...
Specs:
Color | Chrome |
Height | 6 Inches |
Length | 4.5 Inches |
Number of items | 1 |
Size | Small |
Weight | 0.72 Pounds |
Width | 3 Inches |
17. Delta Faucet Bath Accessories 138293 Greenwich Pedestal Toilet Paper Holder, SpotShield Satin Nickel
Greenwich, a builder grade Delta collection, with a classic and comfortable design, makes your bathroom a place of lasting confidence with coordinating 18 inches and 24 inches towel bar, double robe hook, towel ring, and toilet paper holder options, and is available in polished chrome, satin nickel ...
Specs:
Color | Spotshield Brushed Nickel |
Height | 22.2 Inches |
Length | 8 Inches |
Number of items | 1 |
Size | 8 x 8 x 22.2 Inches |
Weight | 3.8 Pounds |
Width | 8 Inches |
18. iDesign Paper Towel Holder for Kitchen - Wall Mount, Black
Plastic paper towel holder mounts to a wallGreat for kitchens, laundry rooms, garages and moreEasy installation -- Hardware includedMade of durable plastic1" x 14" x 7.5"
Specs:
Color | Black |
Height | 14 Inches |
Length | 1 Inches |
Weight | 0.4 Pounds |
Width | 7.5 Inches |
19. iDesign Classico Metal Toilet Paper Reserve, Over the Tank Tissue Organizer for Bathroom Storage, 6.25" x 6.25" x 14.5", Chrome
- FUNCTIONAL TOILET PAPER HOLDER: Sturdy over the tank toilet tissue holder holds up to 3 rolls of toilet paper at a time. Slides easily onto the tank of your toilet. Perfect for your master bathroom, kid's bathroom, and guest bathroom
- VERSATILE: Great for apartments, rentals, or dorms for clean and easy storage
- EASY INSTALLATION: No assembly required, simply take off the lid of your toilet's tank and slide on the bracket
- DURABLE: Made of durable steel with a chrome finish for years of quality use
- IDEAL SIZE: Measures 6.25" x 6.25" x 14.5", perfect for your bathroom
Features:
Specs:
Color | 3 Roll |
Height | 14.8 Inches |
Length | 7.5 Inches |
Number of items | 1 |
Size | 6.25" x 6.25" x 14.5" |
Weight | 1 Pounds |
Width | 7.5 Inches |
20. HASKO accessories - Powerful Vacuum Suction Cup Hook Holder - Organizer for Towel, Bathrobe and Loofah - Strong Stainless Steel Hooks for Bathroom & Kitchen, Towel Hanger Storage, Chrome (2 Pack)
- 3M ADHESIVE MOUNTING DISCS INCLUDED: To install your HASKO suction cup hooks on a concave and convex rough surface, you'll need to use the 3M Adhesive Mounting Discs first which we have provided in the package!
- CORROSION RESISTANT: Rust Proof and corrosion resistant construction prevent rusting. Shower Hooks are made of stainless steel, Cap and knob made up of hardened plastic, and the suction cup itself made up of premium quality rubber.
- NO TOOLS, NO DRILLING, NO HOLES: With the suction cup technology, it becomes extremely easy to install suction hooks: simply position on a smooth surface, apply pressure and turn clockwise.
- SUPER SUCTION SISTEM: Our suction cup hooks Holds up to 22 lbs.
- 100% RISK-FREE SATISFACTION GUARANTEE – We also offer you 100% risk-free satisfaction guarantee. If you have any questions or concerns with your order, you can conveniently contact us. We have an awesome Customer Service Team and will do whatever it takes to make it right for you!
Features:
Specs:
Color | Chrome |
Size | 2 Pack |
🎓 Reddit experts on bathroom hardware
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where bathroom hardware are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
That should be the case because he has way more of a presents on reddit. Thats natural most likely though he could be paying for reddit space as well. I remember not too long ago the Warren sub was extremely small but her stuff was all over r/all. Not stuff from her sub, just her in general. Reddit has absolutely been paid to showcase her in a positive light. I'm not trying to debate if thats a good or bad thing either, just that its happening. Even look at the "best" comments in a lot of these post. They're akin to items with only 5 star reviews on amazon.
https://www.amazon.com/Danze-D444006-Toilet-Holder-Chrome/product-reviews/B00CB2K8ZM/ref=cm_cr_dp_d_show_all_btm?ie=UTF8&reviewerType=all_reviews
"Love this. Very solid, not cheap looking and easy to use"
"Good quality, nice product."
Thats more or less the "best" comments in these post.
"I was very impressed by her energy and warmth."
"Bigger than trumps last rally!"
"A friend from college was there and got to meet her. He said the energy there was amazing and that he really felt like he was shaking hands with the next President."
Its very suspect. Even up votes to comment ratios are way off for a lot of these. Sometimes (not in this case) you'll have a post thats 40k upvotes but only 200 comments. That only happens in subs like this when the post is about some political figure when the post is of them in a positive light (or negative if its republican). Reddit is absolutely helping political figures with PR. And again I'm not suggesting thats a good or bad thing, just that its happening.
Here's my 2 cents.
Otherwise good luck. Your first load will be scary but once you get the hang of it you'll be amazed at the accuracy you can achieve. Also the self reliance part is cool too!
EDIT: If you're looking at a tumbler get the stainless steel kind. WAAAAAAAAAAAAYYYYYY better than anything else. So good that I've switched to bring my brass to a buddy who has one instead of doing it in my media tumbler.
I was looking for something similar for a while. I ended up getting 3M command strips, and using those to attach to a cut piece of over-door hook that worked surprisingly well. Clear too so not really noticeable and mountable just about anywhere. If you needed a pic I could get one for you. Also 3M has a spice tray that works pretty well for a standard controller but not so much on an elite. If you shop around they should have something that would accommodate an Xbox one controller nicely by now..
Edit: I know from experience that these work pretty well. The medium size holds a ps4 controller nicely, as it's a bit more slim-lined. I would think the large would be close to perfect for an X1 controller. I can also provide a pic of the medium size of you need it.
Something like this or this could work. The reason I went this route is so I wouldn't have to drill into the walls, and easily moveable as I move my room around often. Good luck
Frankford Arsenal powder trickler. Compact, nice heavy base for stability, even flow. I also have an RCBS trickler and hate it. It's not as stable and the dispensing arm thingy is a weird two piece design that never seem to flow well for me.
GemPro 250 digital scale. Do not waste your money on cheaper options. I don't have experience with the chargemaster type of scale. I like to do things manually.
Redding Imperial Sizing Die Wax. Best stuff there is. Works amazingly well. I also keep a lanolin/alcohol spray lube around for doing large batch work, but Imperial Sizing Wax does a better job.
Hornady Bullet Comparator set. You don't mention what cartridges you're reloading. THIS KIT DOES NOT INCLUDE 6.5mm. There's a 14 insert kit that includes more, or you can buy just the few inserts you need.
Frankford Arsenal bullet puller. I buy what's cheap. These don't last forever. All the hammering eventually cracks the plastic. I've tried several brands and they all break eventually. I usually keep two on hand.
So that covers what you already know you need. Here are some more recommendations.
Hornady 9th Edition. I use this more than all my other manuals combined. I shoot a lot of Hornady bullets, though. If you already have a favorite bullet brand, you should buy that brand's manual.
Lyman Shooters Check Weights. I use these every single time I reload. I like knowing that my scale isn't lying to me. Digital scales can be finicky sometimes! These are worth every penny.
Hornady Headspace Comparator set. This is a lot like the bullet comparator set, except that it measure to the shoulder of the case instead of the ogive of the bullet. If you're planning on monitoring the amount you're bumping your shoulders during resizing, this is what you need.
Lyman Case Prep Multi-Tool. The chamfer tool that came with your kit will do the job, but this Lyman multi tool is my preferred method. It also comes with primer pocket scrapers that will be useful, and primer pocket reamers you should throw away and never use.
RCBS Uniflow Powder Baffle. This will help your uniflow powder measure throw more consistent charges.
RCBS Advanced Powder Measure Stand. If you're going to do a permanent installation of your powder measure on your bench, you will want this stand. Its price is absurd, but it's a great stand.
RCBS Universal case loading block. Your kit came with one, but you need at least one more.
What is your plan for cleaning brass? Wet tumbling with steel pins is the way to go. I have the Frankford Arsenal unit. It's huge and noisy. If I had it to do over I would purchase the dual drum tumbler from Harbor Freight and buy steel pins from Amazon.
Redding dies don't come with shellholders. Did you remember to get one?
What is your plan for case trimming? You don't mention what you're reloading. The cheapest option, which is actually my preferred method, is the Lee case length gauge and shellholders with their cutter and lock studs.
There are some additional case prep tools, but they would depend on what you're doing. If you are dealing with brass that has military crimps, you'll need tools to deal with that. There are primer pocket brushes, primer pocket uniformers, flash hole deburring tools, and a million other little things.
That's all that's coming to mind right now. I'm sure I missed some stuff.
Congrats on the new home. Looks like a nice space.
I would look into replacing the tile with hardwood or laminate. Especially in the living room/bedrooms. I know that will be really expensive, but I would make this a main, large project priority. I think it will really warm up the whole atmosphere.
In the meantime, here are some other suggestions:
Congrats again and good luck. More than happy to help out if you have any other questions too.
Adulting soo hard .... is SO hard.
Finally, this is the first time you are moving in with an SigOther so make sure you have something that you can do on your own. Both of you should. It is good for you mentally if you know that you have the ability to go curl up with a book and your favorite warm blanket or something if you get a little annoyed with your SO and you feel like you need a break.
If I have anything else I will post it. But goodluck!
Well, I know that bandaids, neosporin and aspirin/motrin are the three things that I absolutely never think of when I'm moving somewhere new... until I need them. So make sure you have those! It's easy to forget them amongst all the other stuff you're buying.
This is something that I've always thought looked like a very useful space saver for an apartment. Here is a slightly pricier version that also includes a spot for magazines!
And, for what I think is absolutely one of the most useful investments for an apartment, in terms of saving time and making good food, is a crock pot. Mine has helped me out on so many occasions, whether I'm cooking for a big group of friends, bringing food to a party, or just making something for my SO and I. And you can leave it on while you leave the house, which means you come home to hot dinner :)
I’ve had good luck with these
https://www.amazon.com/dp/B01JMXKX5M/ref=cm_sw_r_cp_api_-iH5BbHDHQBZ0
They look pretty nice and I just tighten them every couple of months by hand and they stay up great. I have a nice big tiled shower and didn’t want to drill through the tile.
Probably not what you're looking for, but I actually already bought this shelf because it is the perfect size to sit on my extra-deep window sill. Super versatile, super plant-sized, and probably gonna buy another 1-2 because I just realized I think I can actually fit 3 of these in my one window.
studiolife
My favorite part of the holiday is getting to spend time with my family. Since leaving for college I don't get to see them all as much or be at home so its really nice spending so much time with them all.
I would love this toilet paper holder for my bathroom if I win.
Batman
For everyone who needs a place to put it, while using a tissue:
https://www.amazon.com/gp/aw/d/B014SUU8A4/ref=mp_s_a_1_sc_1?ie=UTF8&qid=1520377988&sr=8-1-spell&pi=AC_SX236_SY340_FMwebp_QL65&keywords=Toilet+paper+ho+der+smartphone
I use the JTech grip case for my Switch. Coincidentally the flat space between the grips on those case has the same length as this metal top. Therefore it fits perfectly and makes it a pretty secure place where the Switch doesn't accidentally fall on the ground because it perfectly locks in place.
I have a whole wishlist dedicated to add-ons.
This would be awesome. But if you want to pick and surprise me if I am chosen that is cool to :)
This might be stupid, but why not just use one of those 3M command hooks? They hold really well and you wouldn't have to worry about how to screw into the plaster. Would easily hold a leash and harness and they have metalic looking ones that are pretty nice: https://www.amazon.com/Command-Double-Nickel-1-Large-Water-Resistant/dp/B01C60C4FU/ref=sr_1_4?ie=UTF8&qid=1518910748&sr=8-4&keywords=command+double+hook
>Seating Die:
Seating dies push the bullet down into the case and for pistol cases remove the belling done by the expanding die. Many seating dies can optionally apply a crimp, though some people dislike this because the bullet is still being pushed downward as the crimp is applied. Some seating dies come with multiple or reversible seating stems, this allow you to seat different profiled bullets(FMJ/Ball, Spitzer, VLD, etc) bullets without damaging them.
>Crimp Die:
Crimping dies push the case mouth into the jacket/lead of the bullet. This helps secure the bullet from ‘walking’ out of the case under recoil. There are taper crimps, often used in semi-auto oriented rounds that start from the base of the bullet and slowly narrow as it moves upwards towards the bullet and roll crimps which fold the very edge of the case mouth inwards. Roll crimps are often used on revolver cartridges like 44mag or 38spl and rifle rounds. Taper crimps are used on things like 9mm.
>Factory Crimp Die:
A Factory Crimp Die or FCD is kind of like a fail safe. If a bullet is slightly too large or that particular round didn’t get seated far enough a FCD will correct the mistake. It doesn’t make an unsafe round(say from a bad powder charge) safe to shoot, but it will help make sure all your rounds chamber. Since many people don’t like to seat and crimp on the same step, they use their FCD as their only crimp die.
>Powder Check Die:
A powder check die has a small free floating ram in the middle that drops into the case. It provides an easy way to spot check powder levels based on how high it raises. Some powder check dies will lock the press when they detect an over/under charge. In practice the low powder volume and wide case can make powder check dies unreliable for pistol loads. If you do use a powder check die you shouldn’t let it lull you into a sense of false security, you should still be visually checking your charges.
>Powder Throwers:
This isn’t a “die” so much, but many do fit directly onto your press. They dispense or ‘throw’ a specific charge of powder every time they are activated. Do to the nature of how they work how accurate they are depends on the type of powder you are using. Flake powders and long extruded powders measure with much more variation than ball or short stick powders. Throwers come in three flavors; Case activated, manual, and press activated. Press activated throwers dispense powder anytime the press ram is moved up. This is fine for a single stage press, but on a progressive press it is just a big mess waiting to happen. A manual powder thrower has a small handle you actuate anytime you want to dispense powder. These are great, as long as you don’t forget to pull the lever for every case. Case activated throwers only dispense powder when a case goes into them. These are great, especially on progressive presses.
>Bullet Feeding Die:
Bullet feeding dies place a bullet into the belled/charged case. With a bullet feed die you don’t need to manually place a bullet for each round. While the dies themselves are 20-40 dollars they won’t always save you time without an automatic bullet feeder hopper which can cost several hundred dollars. Only useful on progressive presses.
>Case Feed:
Again this isn’t technically a die, but it attaches to your progressive press and places a new case into your shell plate automatically. These are specific to your press and usually cost several hundred dollars.
Many powder throwers can be given a PTX add on that will expand as well as charge the case. On a progressive or turret press this saves you a spot on your press and on a single stage it saves you from having to do a separate belling step.
Shell Plates
Most die sets come with a shell holder of a matching caliber to keep the brass in the press. However if you are buying your dies piecemeal you’ll need to get a shell holder set. Progressive presses use “shell plates” which hold multiple rounds at a time. These can be proprietary and will need to be purchased separate from your dies.
Lee shell holder set $27.99
Hornady LnL AP shell plate 9mm $24.64
Case Trimmer
When a round is fired the case is under such extreme pressure that the brass actually acts like a plastic. It expands outwards in all directions until the chamber stops it. In front of the round however there is nothing to stop the brass from flowing. Because of this the brass grows in length. After a few firings the brass may be too long to fit in the chamber of a gun again. To combat this after sizing your brass(which further alters its dimensions) you measure it. If it is too long you need to cut some of that excess off with a case trimmer until it is the proper size again. This is primarily only a concern for rifle brass.
Case trimmers can be free hand, manual, and motorized. Free hand allows you to remove brass, but requires you to check with a case gauge often to ovoid over trimming. Manual trimmers allow you to set a certain length to cut to and do all rounds to that length rotating a small lever by hand. Motorized trimmers allow you to set a length and very quickly trim a large amount of cases. Some manual trimmers can have drills attached to make them faster. Not all motorized trimmers can handle multiple calibers.
Lee Zip Trim $21.99 and Lee Cutting Ball $9.99
Lyman Universal Trimmer $82.99
World’s Finest Trimmer .223 $75.95
Chamfer/Deburr tools
Chamfering removes a bit of metal from the inside lip of the case so that bullets seat more smoothly. Deburring is removing a small amount from the outside edge of the case mouth to help remove any burrs or flakes caused by chamfering. You don’t need to do either on pistol rounds as the case is belled wide enough to accept the bullet without it.
You can also chamfer primer pockets. This will make seating easier and in the case of crimped primer pockets it is required.
Again, there are manual and motorized options available. Motorized is worth it for anything above small batches.
Lee Chamfer Tool $3.99
Lyman Case Prep Multi Tool $22.99
Hornady Case Prep Trio $99.99
Bullet Puller
In the process of setting up your dies you’re going to make some dummy rounds. No primer, no powder, just case a bullet to dial in your case bell, seating depth, and crimp. You can just throw these rounds away. . . or you can get a bullet puller and recover your components. There are kinetic bullet pullers that work well with heavier bullets(125gr+ in my experience) and collet bullets that attach to your press.
Frankfort Arsenal Kinetic Bullet Puller $17.76
Hornady Cam-lock Bullet Puller $31.56
I'd never seen this product until I moved to Japan... so.... here's my pitch....
Do you hate changing the toilet paper rolls? do you just use the old cardboard roll still on the roll holder as a simple "shelf" for the new roll of TP? If so, you need this product. Hi, "REDHEAD_FUCK_ME" here for EZ load Toilet Paper Holder This product practically sells itself. I know what you're thinking... I've got $50 to spend and I want to improve my life. I under stand that, so many people do, and now here's your chance to do exactly that and spend less than half of your budget doing so.
Tired of those empty carboard toilet paper rolls hanging around your bathroom? Tired of dealing with that annoying spring-loaded metal or plastic tube that just seem to cooperate? Aren't you tired of the kids loading the TP onto the holder the wrong way? THE SOLUTION IS HERE.
The EZ-load Toilet roll holder uses top secret proprietary technology from the nation that brought you manga porn and the smart toilet! The sturdy ballistic composite EZ loader simply mounts to the wall right where your old TP roll holder was. Toss that old garbage away! The new EZ loader has two spring fed tabs that pop down and hold the TP roll securely, while allowing easy removal. To insert a new roll, push the roll up from the bottom and the tabs lock in place effortlessly. To remove the empty cardboard tube, grab the tube and simply pull up, and it pops right off.
Changing toilet paper has NEVER been THIS EASY. Do you have young children, or does grandma live at home now? EZ Load Toilet Roll Holder is perfect for them! Lazy-ass entitled children now might give just enough of a shit to change the roll themselves before yelling at you, slamming their door and playing minecraft all night. Grandma's weak-ass arthritic hands can even change the TP roll! If only she could still wipe, too!
Call now and we will include the "annoying flap cover" that you'll rip off and throw away once you discover it's a useless addition tacked on so that this ad makes it sound like you're getting more for your money.
ORDER NOW!
To be honest, I don't know what the excitement is over the Japanese (and German, apparently) solutions. They tend to be more expensive and break more easily without actually being more convenient. I prefer the hook style holders, they are just as convenient, and significantly more reliable.
I bought this fan for our bathroom and now the mirror doesn't even fog. But for something like this you would need an external humidistat, but to be honest it moves that much air it doesn't seem to need one (in our house).
We suffered from a lot of black (and pink??) mold before this and now we have nothing, our bathroom is 18m3 so it's not huge (typical UK bathroom), but that fan has worked wonders. The builder who installed it was condescending to say the least, 3 weeks later he called me up and asked me to buy him one :)
"I've never seen anything like it"
Well, minus this, this, this, this, this and literally six other pages of results for near-identical or superior products on Amazon, I guess he's right.
I run one of those extract fans (I got a Sealey branded one, in reality they all come from the same factory in China, just a different sticker). Mine's the 12" version and it's incredible in-efficient, chews up 300-400w to flow 800m3. I have some 6" fans that do 450m3 and only use 55w.
If you care for efficiency then look at inline fans, you could get ten 6" inline fans and still only use 550w while sucking 4,500m3 worth of hot air away from your machines. I live in the UK and will show you what I use, you likely won't be able to get the same brands but certainly similiar.
150mm (6") inline: https://www.amazon.co.uk/gp/product/B01LYEJXO9/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
The 300mm 12" ventilator (like you're using): https://www.amazon.co.uk/Sealey-VEN300-Portable-Ventilator-Ducting/dp/B000ROF4EQ/ref=sr_1_1?ie=UTF8&qid=1521469294&sr=8-1&keywords=sealey+ven300
Sure there you go: Link
And another wider photo of it in my bathroom.
I've been waiting for this shelf to arrive before posting this Shelfie :) Had a bad one that needed replacing and installed this shelf last week. Really happy with it, it also has 2 tiers as you can see.
If drilling is not an option, you can also glue it, I glued mine to china tiles and its solid as a rock. Used extra strong industrial glue.
Found these on Amazon for about $15 and the use of a screwdriver this could be a good solution.
in terms of getting it up off the counter and saving a bit of space.
Wall outlet Shelf
​
Wall outlet shelf # 2
Was just about to say the same. They even make shiny ones.
Command Large Double Bath Hook, Satin Nickel, 1-Hook, 1-Large Water-Resistant Strip https://www.amazon.com/dp/B01C60C4FU/ref=cm_sw_r_cp_api_IOXPAbT7KH32X
Good luck!
nice, but don't they use bidets equipped with warm air dryers nowadays?
edit: here is a similar toilet paper holder: https://www.amazon.com/EZ-CECOMINOD021717-EZ-Load-Toilet-Holder/dp/B001ONT90Y
or a bidet with warm air dryer: https://www.amazon.com/BATHWA-Temperature-Controlled-Posterior-Installation/dp/B079GT6CV2/
Honestly, I would do the same. The holders where you have to tear off the cardboard tube are just a pia. I much prefer the holders that you just easily and quickly slip the roll onto such as this one.
https://www.amazon.com/Moen-DN8408CH-Preston-Holder-Chrome/dp/B000SQS6L6/ref=lp_16350361_1_4?s=hardware&ie=UTF8&qid=1483415376&sr=1-4
I'd rather get something more like this one https://www.amazon.com/Adhesive-Stainless-RUSTPROOF-Brushed-A7070-2/dp/B00LRH18BU/
Just as easy to replace, and doesn't look like it belongs in a hospital bathroom
For lazy non-Japanese:
Here, or here.
And, if you like Ebay better than Amazon, try here.
Do they still have it? i don't like the look of grundtal. Perhaps a HJÄLMAREN
EDIT: Amazon for the win, no spring + phone storage!
https://smile.amazon.com/Stainless-Bathroom-Storage-Brushed-APL-8912F/dp/B014SUU8A4/ref=sr_1_42?ie=UTF8&qid=1483845624&sr=8-42&keywords=toilet+paper+holder
I own one of that design. It would be much better without the top flat, which gets in the way and fails to make the holder any more aesthetically pleasing. It's not as if it hides the fact you have toilet paper there, and the flap serves no functional purpose.
It's otherwise nice, a cinch to replace a roll. $14 on Amazon.
Anywhere we can get this? Hand-Be is the company? Di they have a better looking products with this mechanism?
Update: Found it in 3 seconds https://www.amazon.com/EZ-CECOMINOD021717-EZ-Load-Toilet-Holder/dp/B001ONT90Y
http://www.amazon.com/Bathroom-Lavatory-Brushed-Stainless-BGS2202B-2/dp/B00VWIQ7Z6?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00
Husband just installed for me! Everything was sitting on the counter before or hidden away if it wasn't part of my active routine. Feels so nice to have it all on display!
I'll go ahead and share my comment from the r/oddlysatisfying post this is from:
> A few different options on amazon, all around $10-$13.
> https://www.amazon.com/gp/aw/d/B01EGVD8VG/ref=pb_pd_lutyp_gr_3_1?pi=SS115&th=1&psc=1
> https://www.amazon.com/gp/aw/d/B00BVW2LAI/ref=pd_aw_fbt_201_img_2?ie=UTF8&psc=1&refRID=86ATSSTMYX9AZCP9S161
> https://www.amazon.com/gp/aw/d/B001ONT90Y
> I impulse bought one....
Seriolusly. I feel like this should be a LPT seeing as how many people have issues with others in their household not refilling the TP holder.
GET ONE OF THESE: http://www.amazon.com/Moen-DN8408CH-Inspirations-Holder-Chrome/dp/B000SQS6L6/ref=sr_1_1?ie=UTF8&qid=1372254200&sr=8-1&keywords=toilet+paper+holder
With one of these style holders, its just as easy to put the roll on it as it is to set it down. And they can't set it down on the holder either. If they still refuse to replace the roll onto it, there is a bigger issue than just laziness.
Do you keep the new rolls in the same room? Maybe stack them up within arm's reach?
Or get one if those quick swap ones like: EZ-Load Toilet Paper Holder by EZ https://www.amazon.co.uk/dp/B001ONT90Y/ref=cm_sw_r_cp_apa_CaHmybXN0HAD6
Make it so easy she'll take the path of least resistance. Say you've compromised and you expect her to as well. The threats and arguments are currently the path of least resistance.
> http://www.amazon.com/Bathroom-Lavatory-Brushed-Stainless-BGS2202B-2/dp/B00VWIQ7Z6?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00
Thank you SO much for posting the link to that!
This is the one I have :-)
Sure, it's this one.
It's not the same but I've had this one on my Amazon wishlist forever now. You just made me realize how old I am for having a toilet paper holder on a wishlist.
Only 14.99 on Amazon.
https://www.amazon.com/EZ-5833648-EZ-Load-Toilet-Holder/dp/B001ONT90Y
I started with my powder that low and it drove me nuts. The RCBS stand can be had on Amazon as low as $12 on occasion, and it's totally worth it, like a world of difference. https://www.amazon.com/gp/product/B004TEZH6A
Can also get it here on Amazon
https://www.amazon.com/EZ-5833648-EZ-Load-Toilet-Holder/dp/B001ONT90Y
https://www.amazon.com/EZ-5833648-EZ-Load-Toilet-Holder/dp/B001ONT90Y
Here you go...
Get one of these.
You can't change people.
Boom
https://www.amazon.com/gp/product/B001ONT90Y/
https://www.amazon.com/EZ-5833648-EZ-Load-Toilet-Holder/dp/B001ONT90Y
You can buy it off amzon here
This is the cheapest toilet paper stand I can find quickly. But you need this.
Here you go!
https://www.amazon.com/EZ-CECOMINOD021717-EZ-Load-Toilet-Holder/dp/B001ONT90Y
You need one of these.....https://www.amazon.com/Hornady-HR050095-Cam-Lock-Bullet-Puller/dp/B000PCZZO4/ref=sr_1_1?ie=UTF8&qid=1501089924&sr=8-1&keywords=hornady+bullet+puller
元のサブミに載ってたやつだけど、一応買えるみたい。在庫あるって言うのに7月7日から出荷とかみると、輸入してるだけなのかな。
Found this in Amazon. EZ-Load Toilet Paper Holder https://www.amazon.com/dp/B001ONT90Y/ref=cm_sw_r_cp_api_4fFCxbDWPGY9G
Get it on Amazon now!
Amazon Link
$2.96
$8.05
$9.80
https://www.amazon.com/EZ-5833648-EZ-Load-Toilet-Holder/dp/B001ONT90Y
http://www.amazon.com/Moen-DN8408CH-Inspirations-Holder-Chrome/dp/B000SQS6L6/ref=lp_16350361_1_1?s=hardware&ie=UTF8&qid=1377702873&sr=1-1
I purchased this setup for my windowsill. Overall I like it, if you have spider plants or pothos it maybe a bit difficult to place on the lower shelves.
Though our problem wasn't nearly that bad, the girlfriend and I have completely abandoned the wall-mounted holder and went to something like one of these.
If I was forced to pull 500 rounds, I think I'd drop the 25 bucks for a Hornady cam-lock puller
https://www.amazon.com/Hornady-050095-Lock-Bullet-Puller/dp/B000PCZZO4