Reddit mentions: The best bike pumps
We found 471 Reddit comments discussing the best bike pumps. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 179 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Topeak Road Morph G Bike Pump with Gauge
- Used by both professional and amateur riders alike
- Made using high quality materials and components
- Tested to ensure quality and durability
- HEAD Fits Presta/Schrader/Dunlop valves
- GAUGE In-line gauge, Reads 140 psi/9.6 bar
- HANDLE T-type dual density polymer
- ADDED FEATURES Fold-out foot pad, Flexible hose Includes centerline mount bracket (Art No. TRP-3C)
- WEIGHT 220 g/7.74 oz
- BARREL Butted aluminum
- CAPACITY 160 psi/11 bar; Sport type: Cycling
- Portable on-the-go bike pump with padded T-handle
- Foldout footpad stabilizes the pump against the ground
- Flexible air hose works with awkward or tight valve placements
- Extra-long barrel; inline gauge and secure mounting bracket
- Presta/Schrader head with plastic thumb lock; weighs 0.49 pounds
Features:
Specs:
Color | black, silver |
Height | 13.8 Inches |
Length | 1.1 Inches |
Number of items | 1 |
Size | large x w x h 35 x 5.7 x 2.8 cm/ 13.8” x 2.2” x 1.1” |
Weight | 0.4850169764 Pounds |
Width | 2.2 Inches |
2. Topeak Joe Blow Sport II Floor Pump
Used by both professional and amateur riders alikeMade using high quality materials and componentsTested to ensure quality and durabilityMade in Taiwan. Size : 67.5 x 25 x 13.7 cm / 26.6” x 9.8” x 5.4”
Specs:
Color | Yellow |
Height | 6.25 Inches |
Length | 29 Inches |
Number of items | 1 |
Release date | February 2009 |
Size | 67.8 x 25.3 x 11.7 cm / 26.7” x 10” x 4.6” |
Weight | 0.25 Pounds |
Width | 10.75 Inches |
3. Genuine Innovations G2628 Ultraflate Plus Tire Inflator
- Trigger-controlled technology
- Built in trigger lock prevents accidental discharge
- Heavy duty design and construction
- Works with both Presta and Schrader valves
- Includes one 16 gram non-threaded CO2 cartridge
Features:
Specs:
Color | Grey |
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Release date | August 2011 |
Weight | 0.1 Pounds |
Width | 0 Inches |
4. Serfas TCPG Bicycle Floor Pump
- Capable of getting you to extremely precise inflation pressures
- The switch valve & simple valve designs enable switching between Presta or Schrader valves, while the dual head offers both
- Our simple screw-on and Quick draw head designs both screw on the valve for a secure fit, even at high inflation pressures
- Simple valve pump head - fits both presta and schrader valves
- All metal barrel and nylon base
- 160 PSI capacity
- Equipped with ball and accessory attachments
Features:
Specs:
Color | BLACK |
Height | 6 Inches |
Length | 29 Inches |
Release date | January 2009 |
Size | One Size |
Weight | 2.4 Pounds |
Width | 12 Inches |
5. SDNselect 16 Gram Threaded Co2 Cartridges Pack of 30
- 16 gram CO2 catridge
- Threaded
- 3/8" thread with 24 threads per inch
- Pack of 30 (bulk)
Features:
Specs:
Height | 6 Inches |
Length | 5 Inches |
Number of items | 30 |
Size | 30 Pack |
Weight | 0.03527396192 Pounds |
Width | 6 Inches |
6. Topeak Pocket Rocket Master Blaster Bike Pump
- Dual density polymer head, includes side mount bracket, fits Presta / Schrader / Dunlop valves, with integrated dust cap
- Integrated dust cap keeps head clean and ready to use
- Durable butted aluminum barrel and aluminum thumb lock
- Soft Kraton head and plastic handle for increased grip
- Lightweight, Presta/Schrader compatible bike pump with frame mount included
- 160 psi capacity; pump weighs 4.05 ounces and measures 8.7 by 1.7 by 1.0 inches
- Soft Kraton head and plastic handle for increased grip
- Integrated dust cap keeps head clean and ready to use
- Durable butted aluminum barrel and aluminum thumb lock
Features:
Specs:
Color | Silver/Black |
Height | 0.9842519675 Inches |
Length | 8.7401574714 Inches |
Number of items | 1 |
Size | L x W x H 22.2 x 4.2 x 2.5 cm / 8.7” x 1.7” x 1.0” |
Weight | 0.2535316013 Pounds |
Width | 1.6535433054 Inches |
7. Portland Design Works Shiny Object CO2 Inflator
- CO2 inflator head made of indestructible alloy
- Inflates bike tires in seconds with C02 cartridge
- Fits on both Presta and Schrader valves
- Control knob regulates speed of CO2 release
- Measures 1.75 inches tall; weighs 1.5 ounces
Features:
Specs:
Color | One Color |
Height | 5.9 Inches |
Length | 3.6 Inches |
Number of items | 1 |
Release date | July 2010 |
Size | One Size |
Weight | 0.0881849048 Pounds |
Width | 1 Inches |
8. Geared2U Bike Pump Mini, Compact & Portable - for Road, Mountain Or BMX Bicycles - Presta & Schrader Valve Compatible - Premium CNC Aluminum - Extremely Lightweight
- TOUGH AND DURABLE - This bike pump won't break and you will always be able to deal with a flat tire no matter how far from home you are.
- THE ONLY PUMP YOU NEED. 100 PSI capacity means you can use this frame mounted pump to inflate your bike tire from flat during emergency repair or just use it to keep your tire pressure up during long rides.
- SUPER COMPACT AND ULTRA LIGHTWEIGHT. Almost weightless (3.3oz) and extremely compact (only 7 inches long when not in use) so you can attach it to your bike frame under your water bottle cage with the included bike frame mounting kit, keep it in your bike bag or just carry it in your pocket.
Features:
Specs:
Color | Black And Silver |
Height | 1 Inches |
Length | 7 Inches |
Weight | 0.20625 Pounds |
Width | 1.5 Inches |
9. LEZYNE Pressure Drive Hand Pump, Small - Black
PROFESSIONAL QUALITY MATERIALS - Lightweight, CNC machined aluminum construction with durable and precise parts, which are built to last so you can have a safe and enjoyable ride.HIGH PRESSURE - Efficient and ergonomic overlapping design is optimized for high pressure applications in a small body. M...
Specs:
Color | Black |
Height | 1 Inches |
Length | 8 Inches |
Number of items | 1 |
Release date | July 2012 |
Size | Small |
Weight | 0.1984160358 Pounds |
Width | 4 Inches |
10. 30-16g CO2 Threaded cartridges - Bike TIRE INFLATOR KEG Charger
30 Pack CO2 Cartridges3/8" diameter thread with 24 threads per inchCompatible with all inflators or valves that accept 16 gram threaded CO2 cartridges
Specs:
Color | Silver |
Height | 6 Inches |
Length | 5 Inches |
Number of items | 1 |
Size | 30 Pack |
Weight | 2 Pounds |
Width | 6 Inches |
11. Innovations Genuine 16 Gram Threaded CO2 Cartridges for Bicycle Tires (6-Pack)
- These threaded CO2 cartridges are compatible with all of our Genuine Innovations inflators.
- Genuine Innovations CO2 is pure and clean - no additives and no oils that could gunk up your inflator head or your tire valve. Not all CO2 cartridges can claim the same.
- 16 grams of our most popular size CO2 cartridge. Perfect for road tires and standard bike tires.
- 16 gram threaded CO2 cartridges, pack of 6
- Weight: 54 grams each
Features:
Specs:
Height | 1.75 Inches |
Length | 4.25 Inches |
Number of items | 6 |
Release date | April 2009 |
Size | 16 Gram |
Weight | 1.433004704 Pounds |
Width | 2.68 Inches |
12. Mini Floor Bike Pump, Super Fast Tire Inflation, Secure Presta and Schrader Valve Connection. High Pressure Bicycle Pump with Stabilizing Foot Peg for Road, Mountain, Touring, Hybrid and Fat Tires
- Super Fast Inflation - Floor pump efficiency in a super compact, hand pump size - you’ll be blown away how quickly this ‘Powerful Beast’ inflates tires. Extra long barrel and oversized piston deliver awesome pumping power for high volume & high pressure, up to 100 psi / 6.9 bar. Weight 6.1oz/172g, length: 12.2 inches/31cm. Note: This mini floor bike pump does not feature a 'pressure gauge'.
- Easy Pumping - Ergonomic T-handle provides 'Great Grip and Pushing Power'. Stainless steel foot peg stabilizes the pump on the ground creating a comfortable and efficient pumping motion. Pump can either be mounted on a bike frame with the safe & secure frame mount bracket with extra security strap or stored in a pack / bag / pannier. Pre-drilled holes in bike frame required for installation of pump mount.
- Presta and Schrader Compatible - Secure thread-on valve connection, enables a tight seal with no air leaks! Also includes sports balls and inflatable devices needles.Not compatible with non threaded valve extenders. For Presta valves with removable cores, extra care should be taken to tightly screw the core into the valve stem.
- Save Money in The Long Term, Invest In The Best…Now. Why spend money on a pump which will inevitably fail when you need it the most! This track style pump is made from superior quality CNC machined aluminum alloy with durable and precise parts, which is Built To Last, so you can have a safe & enjoyable ride. Check out our ‘Buying Guide' video in the ‘Related Video Shorts’ section.
- Pro Quality – We are so confident about the quality of our products that if you have any product issues, we’re very happy to either provide a Refund or a Replacement!
Features:
Specs:
Color | Silver |
Height | 1.37795 Inches |
Length | 12.28344 Inches |
Size | without Gauge |
Weight | 0.40625 Pounds |
Width | 1.9685 Inches |
13. Vibrelli Bike Floor Pump with Gauge - High Pressure 160 PSI - Presta Valve Bike Pump Automatically Switches to Schrader - Bicycle Pump Comes with Glueless Puncture Kit
- Large Accurate Gauge: Vibrelli’s bike pump with gauge is built and tested for high pressure precision. The bicycle pump pressure gauge is large, accurate, and easy to read.
- Rapid T-Valve: Presta valve bike pump also inflates Schrader valves, with a simple flick of a switch. The “Rapid T-Valve” on the bike tire pump seals strong with no annoying leaks
- Inflates to 160 PSI: With a strong steel barrel and reinforced handle, Vibrelli’s bicycle tire pump is tested for accuracy to high pressure, it’s the perfect road bike pump
- Includes: Bike air pump comes with an Emergency Glueless Puncture Kit, so you don’t get caught on the road or trail with a flat! Includes ball inflation needle and valve for inflatable devices, so you can use your bicycle pump for pool toys and sports bal
Features:
Specs:
Color | Black |
Height | 5.9 Inches |
Length | 24.5 Inches |
Number of items | 1 |
Size | Large |
Weight | 2.5 Pounds |
Width | 10.5 Inches |
14. SKS Presta Adapter W/Chain Floor Pump Spare Parts
Package length: 12.2 cmPackage width: 9.0 cmPackage height: 1.0 cmProduct Type: AIR PUMP
Specs:
Color | Silver |
Height | 1.181102361 Inches |
Length | 1.574803148 Inches |
Number of items | 1 |
Release date | October 2007 |
Weight | 0.04 Pounds |
Width | 1.181102361 Inches |
15. 15 Pack of 16 Gram Threaded CO2 Cartridges
16 gram CO2 cartridge3/8" thread with 24 threads per inchFood GradeBrought to you by SDN
Specs:
Color | Silver |
Weight | 0.03527396192 Pounds |
16. Pedro's Domestique Floor Bicycle Pump
- Steel barrel for reliable strength
- Molded plastic handle
- Double head Bicycle Pump
- Ball & air bladder inflation attachments store in plastic handle
- 100 psi Bicycle Pump
Features:
Specs:
Color | One Color |
Height | 4.5 Inches |
Length | 26.5 Inches |
Number of items | 1 |
Release date | September 2006 |
Size | One Size |
Weight | 2.69 Pounds |
Width | 9.5 Inches |
17. LEZYNE Micro Floor Drive Hand Pump High Volume with Gauge, Silver
- HIGH VOLUME Pump with Gauge Max: 90psi, 300mm, 150g.
- Barrel, shaft, base and T-handle made of CNC machined aluminum.
- Equipped with: ABS (Air Bleed System) Flip-Thread Chuck.
- Stainless Steel Foot-Peg for Floor Pump Operation.
- Presta and Schrader valve Compatible.
Features:
Specs:
Color | Silver High Volume Gauge |
Height | 2 Inches |
Length | 17 Inches |
Number of items | 1 |
Release date | July 2012 |
Size | Silver High Volume with Gauge |
Weight | 0.4960400895 Pounds |
Width | 6 Inches |
18. Pro Bike Tool CO2 Inflator - Quick & Easy - Presta and Schrader Valve Compatible - Bicycle Tire Pump For Road and Mountain Bikes - Insulated Sleeve - No CO2 Cartridges Included
GET BACK RIDING QUICKLY WITH SUPER FAST & RELIABLE TIRE INFLATION - Inflate a tire in seconds with our 1-Turn Valve System. Control lever operation regulates speed of CO2 release for precisely controlled inflation. Twin valve head threads onto either Presta & Schrader valves with no valve head switc...
Specs:
Color | Red |
Height | 0.9842519675 inches |
Length | 1.968503935 inches |
Weight | 0.05070632026 Pounds |
Width | 0.9055118101 inches |
19. BV Bicycle Ergonomic Bike Floor Pump with Gauge & Smart Valve Head, 160 psi, Automatically Reversible Presta and Schrader
Steel barrelFloor pump with easy to read gauge, 160 psiFor Presta and Schrader ValvesEgromically designed comfortable handle
Specs:
Color | Yellow |
Height | 5 Inches |
Length | 24 Inches |
Size | One Size |
Weight | 2 Pounds |
Width | 9.5 Inches |
20. Innovations Ultraflate Plus CO2
- Uses Genuine Innovations' Trigger Control Technology
- Push on for Presta and screw on for Schrader valves
- Safety lock prevents accidental discharge
- Designed for the rider who demands a higher end CO2 tire inflator; Size/ Weight: 128mm x 32mm x 52mm, 5.039 x 1.259 x 2.043,2.57 oz; 73 grams
- High strength glass-reinforced nylon, brass valve internals
Features:
Specs:
Height | 0 Inches |
Length | 0 Inches |
Release date | April 2009 |
Weight | 0.15 Pounds |
Width | 0 Inches |
🎓 Reddit experts on bike pumps
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where bike pumps are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Is this your first bike?
You should really check out the beginner advice thread and the $200-600 thread in addition to this one. There's a lot of helpful advice in there including SIZING. KNOWING YOUR SIZE IS SUPER IMPORTANT SO KNOW THAT FIRST.
Also, if you're in this price bracket and you don't already have the essential bike accessories:
Note there are other options for all of these that could allow you to save money/space/whatever, but you won't go wrong with what I linked. I'd really suggest having these even if it means you go down a price bracket on the actual bike, they'll all come in handy.
New Bikes
Used Bikes
Another great thing about this price bracket is the used market. I daresay it is easy to find outstanding value bikes used in this price range if you know what you're doing. I helped a friend source this for $1100 and we were being choosey! Again, if you need help post in the questions thread or just PM me because I like helping people with this stuff.
Yeah, the only difference is that I used the Fluval diffuser. The glass diffuser is a lot more fragile - I dropped mine and it shattered. The Fluval one is a clunky piece of plastic, but holds up well. I've been re-evaluating my setup and will be replacing my DIY system with something more robust. Before I get into why, let me go share some advice with they DIY system...
 
First off, I'd also get a check valve. This will prevent siphoned water to back up into your CO2 setup. There are bubble counter/check valve combinations, even a diffuser/counter/check valve combo.
I haven't purchased these, so I can't comment on the quality. I will say - I purchase most if not all my supplies from Amazon with great success. I always buy the least expensive equipment. Most of it I can tell comes from China, but the quality is still pretty good - it gets the job done.
 
Second, the DIY setup is good, but does not last. The DIY kit you can get on Amazon is awesome - fits right on any standard soda bottle and has a nice needle valve and pressure gauge. My problem is durability, the setup I used to create the tank I have in the picture has recently broken down. The pressure gauge ripped off (because the tubing wore down) and although I tried to reattach and seal it, there was a slow leak that I wasn't willing to try and repatch. This is the second DIY kit I've broken, they both broke at the tubing piece that connects the gauge and the bottle cap. The main reason why it breaks down is because I shake the shit out of those bottles to stir up the Baking Soda and/or Citric Acid. I never really paid attention to the pressure gauge flopping to and fro, but now I realize that after enough "fros", the tubing worn down until it tore off. So if you stick with the DIY setup, try to either not shake it like a polaroid picture - or hold the pressure gauge steady.
 
The DIY system is cool because it makes you look like Walter White and also provides a "cheap" way of getting CO2 into your tank. All you have to buy after you have your setup is Baking Soda and Citric Acid. Baking Soda, I get at Costco for cheap and is so big it will last forever. Citric Acid - I haven't really looked in depth at purchasing local - but Amazon sells these 5lb bags for $15. I think it's the best deal on Amazon. I've only bought two bags total (I tried it in my 75 gallon tank - STUPIDEST IDEA EVER - but that was when I was really new to the hobby). I'd say for a 5-10 gallon tank, 1 5lb bag of Citric Acid should last you for maybeee a year - depends on your bubbles per second obviously.
 
One major con I have for the DIY system besides durability is that it's all manual. Sure - you can figure out how to rig up a solenoid of some sort and what not to get it on a timer- but seems like more trouble than it's worth for a DIY system. I let my CO2 run 24/7 which isn't ideal - but as the picture above clearly shows - it works. The other downside of it being manual is that baking soda surprisingly doesn't mix all the way with water. So when you introduce it to the citric acid solution (which mixes well with water) - the entire reaction may not occur until you shake it and baking soda then reaches the citric acid. Having to periodically check my CO2 system isn't terribly difficult, especially if you chose the DIY setup to save money - but sometimes if too much citric acid is transferred into the Baking Soda side - a fuckton of CO2 is created and now either is pumping into my tank or my soda bottles look like they're ready to explode. I will say - this has happened to me very rarely. I've seen my soda bottles build a lot of pressure before - but never bursted. So it's not the end of the world, just an unexpected inconvenience.
 
The other major con I have is refilling. Sure refilling doesn't take that long, empty the neutral baking soda/citric acid solution and add a the the right amounts of the new solutions in. But after doing it so many times - I'm kinda tired of it. I sometimes have extra soda bottles at the ready with the solutions and unscrew the old ones and pop in the new ones. Good plan, but still takes time and effort.
 
If you're careful not to shake the tubing of the pressure gauge, content with either having CO2 run 24/7 or manually turn it on and off AND are willing to periodically refill soda bottles, then I'd say give the DIY system a shot.
 
I chose the DIY setup when I first started the hobby and wasn't sure how dedicated I would be. Also - I didn't have a great paying job that would warrant me paying more for a convenient/foolproof CO2 setup.
 
Which brings me to what I plan on doing now. Now that I'm more interested in the hobby, I've decided to step my game up. For starters, I have a 75 gallon tank rigged up to a 20 lb CO2 tank that I have to refill every 3-4 months. I live by a small hydroponics shop that refills my CO2 tank for $20. I don't know if $20 is cheap, but the store is close, convenient and gets the job done. I also attached a $40 solenoid to it so I could connect it to a timer. This setup has been AWESOME. Very simple, and 100% reliable. I just take my empty 20 lb tank to the store and get it filled and plug it back into the solenoid.
 
Because my 20lb CO2 tank setup has been so successful in my 75 gallon, I've decided to do something similar for my 5 gallon. While a 20lb CO2 tank is complete overkill - there are pretty good alternatives out there. I've looked at using the Fluval 20G CO2 kit and using Threaded CO2 Bike Tire Cartridges. The diffuser that comes with the Fluval system is huge and I would never use it. So basically I'm paying $30 for a regulator that can't even easily attach to a solenoid. Also those 16g bike tire cartridges seem small and wasteful. So your costs are $30 for the setup and ~$30 for the CO2 cartridges - which who knows how long those last. The main benefit to this setup is that it's super small. This seems like a good setup for sure and was very close to going for it, but I've decided to go with something else.
 
I'm buying a 24 oz Paintball CO2 tank ($25) , a CGA 320 Adapter (CGA 320 is the size of the standard CO2 tank threading) ($10), and a regular solenoid ($40). The prices seem reasonable except for that CGA 320 adapter piece. $10 for a piece of metal. Unfortunately, I couldn't find the same piece at Home Depot or Lowe's and I'm also lazy. So I'd rather pay the $10 then figure out how to jerry-rig my own. The adapter allows the threading of a Paintball tank to connect with the threading of a standard CO2 solenoid. Considering the Fluval setup is $60, I'd say this $75 paintball setup is worth it - especially since it now has a solenoid! The main difference is CO2 refill. Dick's Sporting Goods (also local for me) refills 24oz paintball CO2 tanks for $5 and every 5th fill is free. I think 24 oz will last me a long time anyway. In any case - I think the main obstacle whether it is using a 20lb CO2 tank or using a 24oz Paintball tank is where you're going to get that CO2 filled. You can search for a local Airgas or like a place that sells/refills Fire Extinguishers. Bars use CO2 as well for beer - but you don't need food grade CO2, that's just overpaying.
 
I know I went a little overboard, but this is all information that I've recently researched and figured I'd share it. I can't comment on the performance on the paintball tank setup just yet, but I assume it will work fine.
 
TL;DR DIY systems are cheap and good, but not 100% reliable/consistent and must be manually turned on/off/. You may or may not marry a woman named Skyler White during the process. Major costs are $15 for DIY rig, $15 for a 5lb bag of Citric Acid. I'd recommend using a 24oz Paintball CO2 tank because they can attach to a solenoid and are reliable and consistent. Major costs are $25 for a 24oz Paintball Tank, $10 for a CGA 320 Adapter, a $40 solenoid. $5 fill ups at Dick's Sporting Goods.
Definitely get a bib, not shorts. I hate the elastic in shorts, and bibs also don't shift around on you. I am a big fan of Voler and they also have some of their items on sale on their website right now.
You didn't specify which kind of pump you have. If you don't have a floor pump; get one. You will always want to top off your tires before you go out. There is a lot of debate on pumps, but I love my Joe Blow Sport.
Don't get a camelbak. I am in love with my camelbak for hiking, skiing, hunting, etc. but hate it for road cycling. It is uncomfortable in the road cycling position. I'm no expert, but it also seems to generate a lot more drag, which will slow you down. Get bottles instead.
I'm a huge fan of 24 oz Polar Bottle. They are cheap and keep your drinks pretty cold.
I would also recommend a quality energy drink if you are going on long rides (4+ hrs). I love Cytomax Tropical Fruit. Buy super cheap bottles if you are using energy powder, because they are hard to clean and get kinda gross after a while. Before I started using a good energy drink, I would tend to bonk out after 4-ish hours. Switching to an energy drink helped me keep going on longer rides.
If you bought all of these things, you would be just shy of $200. Things I'd consider but don't think are absolutely necessary are: gloves and a good jersey. Also a bike computer, but a lot of people are just using Strava on their phones. You can also buy another bib in case you want to ride multiple days in a row.
Hope this helps!
Edit: Definitely have a portable pump and/or CO2 inflator with you on your rides.
As long as it's not way too small or large for you, that's a good buy. I own a vintage road bicycle and enjoy it more than most modern bicycles I've ridden. That being said, my recommendations:
Peugeots are definitely solid vintage road bicycles. I would have bought this if it were on my local Craigslist. As others have said, these are also great to convert to single speeds or fixies, but I'd keep it as a road bike. However if you wanted to sell it at a later date and you live near a college, it might be easier to sell it as a fixie ;).
Congrats, enjoy the ride.
if you are going full rain-gear, it would include either making your only bike all-weather compatible (full fenders, etc) with the understanding that it will be clunkier to ride and will deteriorate more quickly (rust, sand, drive train, brakes). if you can swing it, get a beater bike that is specifically set up for rain and keep your nice bike (if your bike is nice) in fair weather condition.
 
carry a basic toolkit (spanner, hex wrench multi tool, spoke wrench, tire levers) and a spare tube or two. unless you want to carry a small handpump, you could invest in some CO2 cartridges and a small inflator. include some elastics, bungees, and a small roll of rubberized gaffer tape (just tear a strip of a few feet and roll it on itself so you have a little finger of black magic) -- the tape can be used for many things, from lashing something to your frame to layering up and booting a tire puncture. last but not least, buy a box of rubber gloves, and keep a few pairs rolled up in your kit. all of this can fit in a small saddlebag, handlebar bag, or hip pouch.
 
along with your standard toolkit and flat repair/replacement kit, carry an emergency rain poncho and a pair of rubber boot covers. boot covers are especially nice if you end up getting a pair of shoes that you don't want sprayed with water and sand should you get caught in a downpour or have to ride on sticky/tacky surfaces after a rain.
 
if there is a chance you are going to be riding at night, get a rear flasher and a good headlight (a powerful LED array with multiple modes & brightnesses). good lights usually have a rechargeable external battery pack -- carry a spare battery pack or at least get a few cheap LED flashers (frog knog or similar) to keep in your toolkit as a backup.
 
one last thing that i find helpful is keeping a few drawstring backpacks rolled up in my kits, as they can really come in handy if you need to pick up or carry something (or remove some clothing) unexpectedly. when not in use they fold up smaller than a deck of cards. if you have to lock your bike up outside and have a nice saddle, you can tie one of these over it so it's not so obviously nice.
 
i didn't really answer any if your big questions with specific recommendations, or cover any basic cycling equipment (like riding gloves or bike locks), but these are little tricks or lightbulb discoveries that i've picked up over biking in the city for the past 12 or 13 years. most of the small things are non-essential, but come in very handy and can save a lot of unneeded cleanup and frustration. now i never ride without them.
I spent $600 on an entry-level road bike and about another $600 on accessories last month. First time biking since I was a kid with a budget MTB. Pretty happy with my current setup outside of my evil saddle.
Here are some accessories I got which I think are potentially missing from your list or are just good fits for what you want (not going to talk about stuff like a saddle bag since the right choice for that differs by person/bike):
Try to get a bike fit done. Those can be expensive though. The best tip I can share regarding fit from my limited experience is "your saddle is probably too low".
Here is my work bench. At this point, I can build and tear down bikes. I just replace a headset yesterday, and I have all the tools, for example. So, it's probably overkill for most other people. There are a few things I cannot do, and it's because the tools are too exotic, like BB86 press fit bearing remover, threading the threaded fork, etc.
I also have Nashbar's crown race installer, remover, headset cup press and remover, and steering tube cutting guide. Head set cup press is rather expensive so unless you are going to service the headset multiple times, it's better to use LBS or bike coop.
When you say "Trails", do you mean singletrack loose dirt bike paths, or more along the lines of fire roads, hard packed dirt with a bit of gravel?
If the latter, I think your "city tires" will probably do just fine. Even if they're full slicks (which I suspect they aren't), simply letting some air out of the tires will provide the control you need.
On the tire's sidewall you'll find a max PSI rating. For the road keep it near it's maximum for rolling efficiency. Probably anywhere from 60 to 85 depending on the tire they put on. Lower it to 45-50 for dirt. You'll be surprised at how well the bike handles.
But ChimpStyles, you ask, What if I want to ride 5 miles on the road to the trailhead and back? Won't that suck with the tires deflated? Get yourself a portable pump replies the ever stylish ChimpStyles. You'll want one as part of your toolkit if you get a flat. I like the Topeak Road Morph G. Ask your local bike shop for help if you don't know how to change a flat, I'm sure they'll help.
Thanks ChimpStyles, you're the best! cries monkeyfunky.
And they all lived happily ever after.
If you are going to be riding some more serious / technical / whateveryouwanttocallit trails, then some knobby, dirt-specific tires would be of benefit. In that case, if you can afford a second wheelset I would do that. Tell the shop you what you want 'em for and they'll help you pick out a good set. That will be way cheaper than buying a different bike. You can get a good wheelset with tires for ~300-400 vs. 600-tothemoon for a decent mountain bike.
Have fun on the bike.
Hey nice bike! If I were you I would add a saddle bag with some tubes, tire levers, and maybe get a small pump, and since you're just commuting the whole "it ain't aero" thing doesn't really fucking matter in my opinion ;) I would recommend this and these and this. Also read up on sites like Sheldon Brown for basics, and also I would recommend the GCN youtube channel for repair and maintenance. Also as far as locks go get a U-lock like this for most security and use this locking method. Have fun and stay safe, and feel free to ask any questions to me or any of the other people on this sub!
If you're using tubs... or tubeless (can't remember which), I can't help you much from experience, but I can tell you Lezyne makes some beautiful and well-engineered products and you'll need a shock pump to seat the tubular or tubeless tires onto the rim, so I would feel confident recommending this Lezyne floor pump.
On the other hand, if you run clinchers, I've had good luck with this Topeak Joe Blow pump, rated for up to something like 160psi
Also, you likely already know, but just in case, here's /r/triathlon
For longer rides I typically take these items with me:
Don't discount how comfortable lycra shorts can be on longer rides. They can be a very good investment.
To learn about maintenance, Google will honestly be your best bet. Even a general description of the problem (eg, "bike brakes not stopping well") will likely turn up a number of articles and posts on various cycling forums. However, there are some really good Youtube channels out there. These include GCN and GMBN which every Monday show some aspect of bike maintenance. RJ the Bike Guy has a number of very comprehensive videos on relatively obscure bike maintenance topics, but his channel tends to focus on vintage bikes rather than brand new ones.
I got this one about a year ago. It's super light and comes with a frame mount, and can be used for both schrader and presta. It's the best portable I've used so far, but like other posters have mentioned can be hard to get your tires to a high enough psi.
A year isn't long enough to say much about durability, but there are 600+ reviews on amazon you can take a peek at if you're interested.
All in all, it depends on what you're looking to get out of it. Need something to help you in a pinch that doesn't need to be refilled or anything? This is it. If you need something to keep you going on a century, look elsewhere.
pump wise, I've got basically this: https://www.amazon.co.uk/Lezyne-High-Volume-Mini-Foot-Pump/dp/B005UZP2ZS just so you know what I'm talking about. After tearing the stem on my tube 3 times inflating it with a more normal hand held pump I said fuck it, and went looking for something like this which is just a mini floor pump. Good and stable and inflates quickly.
for a multi-tool, you want something that has at the bare minimum tyre levers and a number of hex key sizes (to fit brakes, handlebars adjustment, seat adjustment...). Needle nose pliers can also come in useful.
I mean, anything with a gauge and ideally both schraeder and presta valves works. I have a pedro's pump which has shockingly bad amazon reviews as mine is 3 years old of ~daily use and is fine, but who knows.
Even if you're not planning on night rides, you should have lights for dusk/rain/etc. Better to have them and say 'oh yeah i'll go do ride where I might be out late' than be stuck out late and riding without lights. I actually think they are more important than a helmet, but whatever.
The lock is your call - security is important, and as long as you lock smart nobody's gonna bust that thing for your bike, so more power to you.
Thank you. I'm not a spandex wearing type of bicycler (and the world thanks me for saving them a trip to /r/eyebleach), so weight isn't important to me. With my circumference, the difference in weight isn't important, I just have to be able to carry it on the bike (or the bag). That seems like a better price than I would have thought, though. Huh.
In my case, I need it specifically for punctures on the trail. I agree a good pump at home is wise. Not sure why, But I guess I never thought to compare the good tire to the flat for close-enough pressure. Sadly, I've gone through two tubes in a very short time. Still got a couple of CO2 canisters left, but I'd like to leave those to emergency-emergencies. I don't mind stopping for 10-15 minutes to pump up a tire after patching it.
EDIT: Thank you!
I carry one of these hand pumps. They work awesome and are very well made.
Mini Floor Bike Pump, Super Fast Tire Inflation, Secure Presta and Schrader Valve Connection. High Pressure Bicycle Pump with Stabilizing Foot Peg for Road, Mountain, Touring, Hybrid and Fat Tires https://www.amazon.com/dp/B01BVOUI32/ref=cm_sw_r_cp_apa_i_ftKhDbW6M137D
The most honest answer I can give you is that it just feels better. The most practical is that when you're going 45 mph on a downhill in the mountains, the less that rattles and can fall off your bike, the better.
[This] (http://www.amazon.com/gp/product/B008R5RT36/ref=oh_aui_search_detailpage?ie=UTF8&psc=1) is my favorite, and fits spare tube, multi tool, levers, patch kit, tire boot, co2 and goes in my middle pocket. This guy goes in my right pocket with snacks and arm warmers. And then phone/keys/cash in left pocket. Only bidons on the frame.
I bought a Topeak JoeBlow Max II from amazon back in March. Given the reviews it seemed like the way to go. Got it, hooked it up and pumped up the first tire just fine. Started to pump the second tire, and something failed in the pump. I could hear hissing near the pressure gauge and I couldn't pass any air through the pump.
Luckily amazon.com has an awesome return policy so I was able to pick up the Serfas TCPG Floor Pump. This pump has worked wonderfully for me, and seems to be built better than the Topeak one.
If you're looking to up your riding game, everything listed above will save you from any trouble you have on the road. Cycling computer is always neat to have too!
Cygolite Metro 400 and the Hotshot are brilliant. The lights definitely pack a strong punch. I'll tell you right now, unless the lighting in your town sucks ass or you go off road riding, the metro 400 is a great light and you don't really need to go much higher than that.
I bought a box of 30 on Amazon for about $30 (link). They're threaded, and they fit in pretty much any standard inflator.
I only use them ultra-rarely, but they're just perfect. Actually, a huge piece of metal was flung up in a group ride yesterday (my first flat in months), and one of these cartridges worked just fine.
This is the best advice here. As for a pump, if you're going to go with a regular pump this one is what seemed to come up the most when I searched this sub and it's served me pretty well. It does kinda rattle a bit when riding, though. Down the line you'll probably want to get a regular floor pump, too, something like this maybe.
I'd also agree that gloves aren't necessary. Also agree with two cages and two water bottles. I started with just one bottle but quickly realized that I need two. Any old cage will do, and Camelbak Podium bottles are a popular choice. I got the clear one so I can tell at a glance how much water I have left.
Road bikes are great lighter the easier it is to ride, it might be worth getting slime tyres to stop punctures, I have a triangle bag that goes inside the frame that I put a small pump and a multi tool in + my lunch on a weekday.
I would recommend two thick D locks to use when parking, I thread the 'D' through the bag buckles and keep the keys and lock in the Bag.
for weather gear you need a rain layer warm layer and sweat layer to keep out the cold. waterproof gloves, goggles or eye protection.
Fenders would be a good choice as well to stop mud flicking up.
Don't get a mountain bike, really not very easy to ride and heavy. Also lights
I have a similar pump, and I've been very happy with it. I really like the flexible hose; it makes the pump easier to use. Depending on what kind of bike you have, you might want the high pressure one (120 psi "pressure drive" vs. 90 psi "alloy drive").
I also have this multitool, which I've also been happy with, except the large hex wrench that fits over the smaller one isn't as secure as I think it should be (it's never fallen off though).
I don't have it yet, but I'm planning on using this. Someone in the review section suggested buying these instead of the refills Fluval sells. Even though there aren't a ton of positive reviews I trust Fluval enough as a brand to feel comfortable buying the kit.
I should add that I'm upgrading my lighting before I get the CO2 system as I feel it'll help my plants more than CO2 will right now.
Rather than standard tire levers, I prefer to use a speed lever for changing my tubes/tires. Though I think I want to pick up one of their speedier levers, because that knuckle protection looks pretty sweet.
For a pump, I'm a huge fan of the Topeak Road Morph G. Though on one of my bikes I forgo the pump and just ride with CO2 and a chuck since I flat so rarely and it fit is my seat bag (though I still always carry two tubes).
And as others have said I try to never go for a ride without my multi-tool an ID some cash, a bank or credit card, and my phone.
Floor pump for at home before you ride. I have a Serfas FP200 which is excellent
On my road bike I just carry CO2 inflator and cartridges, but on my touring bike I have a pump that mounts under the bottle cage. It's best to get one with a hose like this one. That way, you don't damage the valve or tear the tube when pumping.
camelbak cleaning tablets
front fork transportation mount
I guess Raleigh bikes qualify
giro infant bike helmet
compression cycling shorts
CO2 inflator
gonex cross country helmet
pandoom cycling jersey
camelbak MULE
camelbak bottle
baleaf chamois undershorts
camelbak minimal kids hydration pack
camelbak women LUXE backpack
BV small saddle bag
camelbak rain cover
Hollywood bike rack for sedan
saris super bones bike rack
Some of these aren't amazing, and some might expire by the time you get to them, but this is mostly everything mountain biking related. Good luck, all!
I've been using this one for quite a few years, and I love it! Really awesome small solution with great replacement parts for the whole unit. It's another pump that a lot of people swear by (including myself, but I am fallible like the rest)
http://www.amazon.com/Topeak-Road-Morph-Bike-Gauge/dp/B000FI6YOS/ref=sr_1_1?ie=UTF8&qid=1395611696&sr=8-1&keywords=topeak+road+morph
Here's a link to some CO2 tanks: https://www.amazon.com/30-16g-CO2-Threaded-cartridges-INFLATOR/dp/B00957L0EY/ref=sr_1_6?crid=3IU71Z5WP504Q&keywords=co2+cartridge+16g&qid=1564603164&s=electronics&sprefix=co2%2Celectronics%2C153&sr=1-6-catcorr
I would love to make one of these as well. Great idea OP!
I'm saying use CO2, Nitrogen, or any gas but don't bother with that 'liquid' part. I would think a small array of CO2 canisters Like this with some actuated puncture nails would purge the space perfectly. You would want to make sure to not be releasing a bunch of CO2 into your house all at once, but that would do it.
You should inflate your tires more. 30-40 psi is a good range for mountain bikes, but if you're on the road, you'll want around 80 psi. Underinflation is more likely to cause flats, due to either the tube being pinched or the larger surface area on the ground (if you run over glass, rocks, thorns, etc.) I have had this pump for around 3 years and it works perfectly every time, highly recommended.
On Amazon.com the Most helpful Customer Comment for the Topeak Joe Blow Sport II Floor Pump at the top of the page has only two stars:
>186 of 191 people found the following review helpful
>cheapo materials
>By iiigoiii on June 17, 2011
>there's a couple of problems with these pumps, as other reviewers have pointed out for this pump and the original sport.
>- the head can be difficult to get a seal with, especially on the presta side. it may take several tries before being able to get air to flow,
>- the dual head is large, making it difficult to get onto smaller wheels with closer spokes,
>- the hose material is a cheap plastic, not rubber - it quickly starts to crack wherever it's bent (near the outlet and where it's stored over the handle) and soon blows out.
>their support company, todson, refuses to warranty the hose even though it's a material defect. instead of paying them a third to half the cost of a new pump, get 3/16" fuel line from your local auto parts store. fits perfectly, will last a lifetime, and only costs about two bucks!
This review, and the 186 people who agree with it, gives me cause for concern, particularly with the small Brompton wheels, hence why I am on here looking for input. :-)
Good start: After a few versions over the last few years, here's my current "Don't leave home without it" packing list:
In seat bag:
All of that fits into THIS seatbag.
EDIT: bullet formatting and added a couple small things after actually checking my bag because I forgot a few things.
A lot of hand pumps are tough to get skinny tire pressures, but I've had really good luck with the Road Morph. The nice little hose lets you put the thing on the ground and pump against the ground like a little floor pump. 110psi no problem.
The following items get removed / put in depending on the ride
And here is the bag that all fits in:
BV Bicycle Saddle Bag
I have the large saddle bag and its more than big enough for all that stuff. Everything on my list could probably fit in the medium as well. I just like to have room for extra goods.
This so far is the best review I can find.
I currently own a 30" 24/7 on a 20g long. It's an amazing light but highly recommend doing co2 if you want to use 24/7 mode. For a 10g you could probably get away with Fluvals 20g co2 kit for $25 on amazon. Also that co2 kit does work with regular 16g co2 threaded cartridges like these.
I'm new to all this, but I know you can get super tiny CO2 cartridges and regulators for cycling. Since you're not targeting a set pressure and just adding back CO2, this might be a really simple option.
Something like this: https://www.amazon.com/Portland-Design-Works-Object-Inflator/dp/B003M2PNGY/ref=sr_1_5?ie=UTF8&qid=1506716175&sr=8-5&keywords=cycling+c02
I have this one and really like it. It lets me transfer all the goods from one bike to another easily.
What I have in mine:
So, there are two different styles of CO2 cartridges - threaded and non-threaded. With threaded cartridges, you can use the really tiny inflators like the Lezyne Trigger Drive. With threadless, you have to use larger inflators that cover the entire cartridge. Depending on the inflator, you may or may not be limited in which size of cartridge you can use.
The pros to threadless are that they're more widely available because they're used for paintball, and if you're buying cartridges one at a time, they might be a little cheaper.
The pros to threaded are a small, lightweight inflator, and the ability to use any size of cartridge, including huge 40-gram cartridges for full-on fat tires. I linked to the Lezyne Trigger drive inflator because that's what I use, and I love it. It's never let me down. Plus, if you're willing to buy in bulk, you can get threaded cartridges just as cheap as threadless. I bought this 30-pack (working out to ~$1 each) two years ago, and I'm only about half way through it.
Also, tires and tubes are especially porous to CO2, so if you use it to fill a tire, the next day you'll find the tire a bit lower than you remembered it to be.
I got this really cheap one on Amazon for $10. The spanners on it are crap, but other than that it's served me well and taken care of one flat so far.
I got a decent pump (on sale) and also carry some paper towel and a spare tube. Since my rear wheel isn't quick release, I also have a small adjustable wrench. I ended up making my own little bag to fit it all.
I didn't want to spend a ton starting out, so I think it was a decent place to start. I'll probably upgrade parts over time when they break/wear out.
What kind of pumps did you have trouble with? Stem mounted ones I presume?
If you're still interested in a pump, I'd recommend you get one with a hose. I have a Topeak Road Morph G and it works great. It functions like a floor pump so you can use your body weight when pumping.
I've used this saddle bag for 6 years now. It fits a spare tube, CO2 canister and pump, patch kit, levers, and multitool--that stays on my bike at all times--and can fit my phone, ID, and keys on long rides. I have no complaints about it at all. If you're set on carrying two tubes though, it might be a little small (though I think a single spare plus a patch kit does the job just fine).
This is the CO2 pump I've used for a little over a year now (I used a hand pump before that). It works great. As far as bulk CO2 canisters, I wouldn't really worry about it. They're like $2 or $3 from any bike shop or REI, and how often do you really get a flat? You'll probably only use one, maybe two, in a year.
Buy a valve extender with a built-in valve core. Milton is the one I use to inflate my M365 hard-to-reach valve - works well. And should allow you to continue using your current pump.
If you're keen on a new pump, I bought the BV one from Amazon. https://www.amazon.com/BV-Ergonomic-Automatically-Reversible-Schrader/dp/B0085OUN1O Tis good.
CO2 canisters work pretty well and you can get 30 of them for $35 or so. I got it last year and after installing a couple of sets of tires, still have more than 20 of them. You'll need an inflater as well if he doesn't have one and that's like $10.
http://www.amazon.com/30-threaded-cartridges-INFLATOR-charger/dp/B00957L0EY/ref=sr_1_9?ie=UTF8&qid=1449621007&sr=8-9&keywords=co2+canister
The Serfas looks a lot like one I recently purchased: https://www.amazon.com/gp/product/B017ADD9N4
I like it, and it seems to do the job quite well on both Presta and Schrader. My only gripe is that on both its a bit tough to get on the valves. The Serfas may not have that issue, and is a bit cheaper. If I had seen that one I'd probably have bought it instead. :)
The plastic strip should stretch enough to pull off. Slide a screwdriver under it at the valve hole to get started. If it won't budge, just cut it.
For air compressor use, I like this adapter. It's a little more robust than the screw-on aluminum adapters and works better. The screw-on adapters are nice to have for emergencies though (like trying to fill up a tire at the gas station).
There are similar systems to the blow gun for setting up tires - a couple companies make pumps with attached air chambers that can be filled up to 100+ psi, then released with a lever to seat a tire. Specialized makes just a canister that does the same using a separate pump, and you can make your own out of some hardware store parts and old soda bottles too. A compressor essentially serves the same purpose though.
That's good to know, thanks!
EDIT: Found gas refills on Amazon if anyone else is interested.
If you're talking about the lezyne micro floor drive, yes, it's awesome and worth the $.
I use this one and it has been great:
http://www.amazon.com/Topeak-Blow-Sport-Floor-Pump/dp/B002B7LTBY/ref=sr_1_2/182-7405441-5301903?s=cycling&ie=UTF8&qid=1419998243&sr=1-2
My last pump was a POS and didn't have a built in gauge. I'm much happier with this one.
A good U-lock is kind of the gold standard for security. Chain locks and cable locks have to be super hefty for me to trust them. Also, learn to lock it properly. Wheels can also be stolen. Getting skewers that are not quick-release isn't foolproof but it does add some security.
You likely won't need the socket wrench combo, unless your wheels are bolted on with hex nuts. Otherwise, a patch kit and a bike multitool will cover 95% of your on-the-road needs, plus a pump. It's not the smallest option but I'm a big fan of the topeak road morph. I also carry tire levers and a normal (non-combo set) 5mm allen wrench, since it's the size I use most.
One of the tricks to winter riding is to ride through the shoulder season so you can gradually work your way down into lower temperatures and figure out your layering. Much easier than going from summer riding to commuting at 5 below zero.
Something like this. Include a few replacement cartridges.
It's really quick (compared to a hand pump that you'd carry on a ride), but you have to use a new cartridge for each flat. It's the kind of item most reasonable people won't buy, because you'd just spend the 15 minutes to pump up your tire for free. BUT, if you're riding with a group, this is great so you don't fall really far behind.
$20 on Amazon with great reviews:
Pro Bike Tool Mini Bike Pump with Stabilizing Foot Peg, Secure Presta and Schrader Valve Connection, Silver without Gauge https://www.amazon.com/dp/B01BVOUI32/ref=cm_sw_r_cp_api_sKAfzbZ94776J
You mean something like this? That's an adapter that you can leave clamped in a Schrader air chuck that pushes right onto a Presta valve like a dedicated Presta chuck head.
These are popular and work pretty well
I ride a road bike and use the Topeak Road Morph G. It is compatible with presta and schrader valves and has a built-in psi gauge. It's a bit heavy, but I love it!
From the looks of it, you're using the Fluval co2 20g kit right? If so, the regulator will definitely fit on 16g threaded cartridges like these (you can find cheaper ones with a little more searching). Never had any issues with the co2 as far as its quality goes.
So, I have that same pump but I've never used it on any tire that already had air, it's always been as part of a flat repair on the road. It might actually be normal, my floor pump doesn't register anything until I give it enough air pressure to get the presta valve to open.
I might suggest that you get a floor pump for your regular tire maintenance. Your arms will thank you. I've been very happy with my Topeak Joe Blow 2.
Giro has a nice selection of helmets for varying budgets. I'd also recommend checking out Specialized and Lazer. Trying one out in a store is ideal, especially if you're buying a pricier one.
I'm using this pump myself with no problems. I've also heard good things about Specialized pumps.
Serfas TCPG - $30, fits both Presta and Schraeder, goes on and off of all valves fine (I've had other pumps get stuck on threaded presta valves and destroy tubes before), comes with adapters for other things (sports balls, exercise balls) so you only need the one pump for everything inflatable you have, and works generally great. I've honestly not wanted anything more since I got it, and in a year of using it a couple of times a week across four bikes, it's never failed me.
Negatives/Side Benefits: If you use it to inflate a 75cm exercise ball, you'll be able to fry an egg on its casing by the time you're done.
Not too big. Something like this should work great: https://www.amazon.com/Performance-Floor-Gauge-Glueless-Puncture/dp/B017ADD9N4/
I'm not sure if you're against CO2, but the PDW Shiny Object is great with 1 or 2 16g CO2 cartidges.
http://www.amazon.com/Topeak-Road-Morph-Bike-Gauge/dp/B000FI6YOS/ref=sr_1_1?ie=UTF8&qid=1380651864&sr=8-1&keywords=bicycle+touring+pump
About a foot long, transforms into a floor pump. Easy to fill 100psi and beyond. Has saved my bad-lucky-flatted ass many times. Best there is.
You'd probably be much better off going Tubeless, keeping some Park Tool Emergency Tire Boots on hand, along with a good CO2 inflator.
The Tubeless Sealant will plug small holes, the Tire Boots will fix sidewall punctures and the CO2 inflator will make quick work of re-inflating. Just get real air in it when you get back home since CO2 permeates rubber faster than air.
And you don't have to remove the wheel.
I've got the Topeak Road Morph G which I'd give a 8/10 after using it as my exclusive pump for almost a year. The build quality seemed okay at first but it's showing signs of age quickly and after being mounted to my frame is collecting all sorts of sand and dust internally that is affecting its performance – I should probably clean it. On the plus side, it's large and easy to use even to get high PSI and it has a built-in PSI. On the downside, it's large and somewhat hard to mount on my frame.
Just so you know, CO2 is purely a temporary measure as the molecules are more attracted to the rubber than standard air. After you fill the tire with a cartridge and arrive home, you should always empty the tire and refill with air.
I use this Serfas pump and it is awesome.
Anyone have any good recommendations on pumps with built in pressure guages? I'm currently looking at the following: http://www.amazon.com/Topeak-Road-Morph-Bike-Gauge/dp/B000FI6YOS/ref=wl_it_dp_o_pC_nS?ie=UTF8&coliid=I2WU21EIVSXT6V&colid=17NALENO65NI8
Would love any input.
I bought a Topeak on sale at my LBS for around $25 bucks 2 years ago, and have never had a problem. It's got great reviews and seems fairly solid.
I have the Topeak Joe Blow for home and Topeak MasterBlaster on my bike. I'd recommend the Morph wholeheartedly - it's got more power than my MasterBlaster, due to its larger footprint and footstand. Should get you through most anything, but a good big pump at home is invaluable.
This is actually VERY simple to prove, ON YOUR OWN, with fairly cheap materials.
Materials:
Procedure:
Expected Result:
You will certainly see the CO2 container get warmer much faster.
Background: Now, take a commercial plane trip, and fly into a large urban center, like Los Angeles. Note that you're flying about 400-600 mph. Look out the window on your approach and observe all the cars stopped on the highway. Each one is continuously spewing out large quantities of CO2. This happens all day long, every single day of the year. Yes, our earth's atmosphere is vast. But you keep pumping this stuff out day after day, and after a few decades, it starts to build up.
That's global warming, in a nutshell. It is VERY simple to prove it for yourself. There are complex ways in which the earth's climate heats up and cools down, but this is how it works, in a nutshell. More CO2, more heat. The length of the day remains the same, and heat absorption goes up during the day. The length of the night remains the same, but the atmosphere retains more of that heat, so we will continuously build up heat, and get further and further behind, every day, as that heat is trapped and can't radiate away to space. And as the air gets more CO2, the problem gets worse.
This property (the heat-retention of gasses) has been known about since roughly the late 1850's. What we did not know, was how fast our population would grow, or how much industrial output of CO2 there would be. By the 1950's it was pretty clear what direction we were headed in. By the 1970's, most scientists did agree that this was a problem, and was happening, but they didn't really all agree on what the time-scale would be. Since the mid 1990's when we've invested in observing data more (satellites, weather instruments, computer simulations), we've become more and more certain that this is a real, and immediate problem.
I use a Topeak Pocket Rocket. I've used it for a year now and it's saved me at least 20 co2 cartridges in that time. It comes with a bracket to hold it along the water bottle mount which works really well, but you might be able to fit it in a larger saddle bag.
I checked it with a gauge and I was able to fill up a 25c tire to 120psi in about a minute. It doesn't have a hose, but at $15 it's the cheapest pump that will fill a road tire and not break when you need it.
Thanks this has given me a lot to think about. I just found this one that someone said works for the Fluval kit. How long do think a cartridge like that would work for?
Did you know Amazon will donate a portion of every purchase if you shop by going to smile.amazon.com instead? Over $50,000,000 has been raised for charity - all you need to do is change the URL!
Here are your smile-ified links:
PDW Shiny Object
threaded cartridges
---
Never forget to smile again | ^^i'm ^^a ^^friendly bot
Thank you so much! So I also have to buy a bike pump like this?
https://www.amazon.com/Performance-Floor-Gauge-Glueless-Puncture/dp/B017ADD9N4/ref=mp_s_a_1_3?keywords=bike+pump&qid=1550592613&s=gateway&sr=8-3
Oh, Snake wasn't referring to a brand. Slime is fine for brand. Snake is the type of kit, with the "strings" or whatever they are called, I have always heard them called snakes haha. this type of patch As sold here Also for a pump I have this one Its nice with the flexible hose so you can push it against the ground with your weight. Also the gauge is nice so you know when your done, I have tested this up to 100psi had no problems. It rides in my bag while I dirt bike, so it holds up well to abuse.
Edit, I just decided to check, and go figure your bike might have tubes... I don't know for sure, one site said this:
Custom has no tubes.
900 Classic, 900 LT, and 1500 Classic have tubes.
1500 Nomad, Mean Streak, and all 1600 and V2K are tubeless.
If you has tubes then the snake kit wont work. Also a tube repair roadside on that bike might be a bit extreme... You have to pull the wheel off, pull the tire off the wheel, patch the tube with a tube repair kit, then reinstall it all. I do this on dirt bike tires all the time, but with a road bike, I wouldn't bother trying. Just hope you don't catch a flat on the go.
I just use these off of Amazon. They are 4 grams less than the ones that come with the Fluval, but they fit just fine, just don't last as long. They are much cheaper than the ones Fluval sells.
I have the Turbo Morph. Same pump but it comes with a gauge for $5 more. I only have it around in case I flat while out on a ride. That's happened once in ~7000 miles.
Mostly I use my large floor pump, to top off the tires before rides. [Serfas TCPG Bicycle Floor Pump] (http://www.amazon.com/gp/product/B001MK3GFS/ref=wms_ohs_product?ie=UTF8&psc=1) $30.
You need a mini pump in case you flat, but it can't compare to the ease of use of a floor pump.
https://www.amazon.com/Pro-Bike-Tool-CO2-Inflator/dp/B017KU1DIK/ref=asc_df_B017KU1DIK/?tag=hyprod-20&linkCode=df0&hvadid=312111916046&hvpos=1o1&hvnetw=g&hvrand=1363445431410111356&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9005111&hvtargid=pla-497567247564&psc=1
This is what I use but anything similar should do the trick. I also use Crank Bros CO2 cartridges, but again anything similar will work. If you do go the CO2 route: be sure to have a sleeve for the cartridge as those suckers will freeze your fingers off. Works pretty well on 120 PSI road tires
here's a list of stuff i have and use frequently that i feel others would probably appreciate: airzound air horn, one of these two mounts, multi-tool, CO2 tire inflator, there's no such thing as too many patch kits, bikeglow safety light, PDW danger zone tail light, lezyne micro floor pump, louis garneau super prestige cold weather gloves
I use one of these when I'm ambulatory. It doesn't hold much, but it gets the job done if I can't reach the spot with our compressor.
http://www.amazon.com/Genuine-Innovations-G2628-Ultraflate-Inflator/dp/B002AGI1QW/ref=sr_1_1?ie=UTF8&qid=1425922426&sr=8-1&keywords=co2+duster
Otherwise, it might save you some money to get a HPA tank, regulator and air nozzle.
Dont skimp on vital tools for your trip or it may get cut short.
I've owned two of these pumps in the last 16 years. They are bombproof, inexpensive (for the quality) and have been the go to while on the trail, even with friends who own additional pumps. They also fit both valve types.
Highly recommended:
https://www.amazon.com/Topeak-Road-Morph-Bike-Gauge/dp/B000FI6YOS/ref=sr_1_1_sspa?ie=UTF8&qid=1527808752&sr=8-1-spons&keywords=topeak+bike+pumps&psc=1
Sounds like a bad pump. I've never had a foot pump that worked well. Schwinn stuff ain't the greatest either I have found. My favorite floor pumps are Specialized, and my favorite pump to carry on the bike is the Roadmorph.
I carry this bad boy around and use it exclusively as my bike pump. It's been a great investment. http://www.amazon.com/Topeak-Road-Morph-Bike-Gauge/dp/B000FI6YOS/ref=pd_sim_sg_8
I use this one.
http://www.amazon.com/Topeak-Road-Morph-Bike-Gauge/dp/B000FI6YOS/ref=pd_sbs_sg_5
Had it for three years and it will works great.
Your 5 tubes could have almost bought [this] (https://www.amazon.com/Topeak-Blow-Sport-Floor-Pump/dp/B002B7LTBY/ref=sr_1_2?ie=UTF8&qid=1503409742&sr=8-2&keywords=topeak+bike+pump). Just buy a proper pump already. I use this pump, it works great.
You should have a seat bag with CO2, a patch kit, and a multi tool.
Never ever leave home without it.
When I go on really long rides, I have a trunk bag with all my tools, tube, and a couple extra spokes. It beats being stuck somewhere.
For a solo multi tool, I have this.
The best CO2 deal you will find is this and this.
And any patch kit will due. But you can try for glueless if you just want to make it to the bike shop for a new tube.
I've been very happy with my Joe Blow Sport II.
I've been riding in the city for 10 years so here goes:
Cars are getting better at dealing with bikes as they become more popular, but overall the city isn't well designed for bikes. Thus, it is understandable that both bikes and car users will get frustrated with eachother from time to time. Nature of the beast for the time being.
4 AM rides are great. As is drunk Lake Shore Path riding.
I like these shorts they are not that expensive and have lasted well over a year and going strong. My floor pump looks something like this but I can't remember the brand name. As far as tools you likely just need a screw driver and an allen key for the adjustments. There are some youtube videos that explain the process. You will want a work stand. <-- is the one I got. It is a little bouncy but it works and it was under $100 so I'm happy with it. You may want to throw in a pedal wrench while your at it.
Honestly, it was more convenient for me to just buy my own pump. The one I got is like $30 (there are cheaper options available if you scroll down), but at least you know it works, and have it on-hand at home instead of having to find the one on campus that isn't broken.
That pump isn't going to fit in that bag. Rest of the shit will though. I have the large bag and the pressure drive pump
Sure, on Amazon the budget options are https://www.amazon.com/Topeak-Road-Morph-Bike-Gauge/dp/B000FI6YOS/ and https://www.amazon.com/Panaracer-RiBMo-700-Folding-Tire/dp/B01GQWHIIW/?th=1&amp;psc=1 ($100 total), but if you have more money to spend the other parts I mentioned are worth it.
Just keep in mind, if you get a small pump to carry with you (so you can pump up your extra tube if you get a flat) make sure it has a flexible cord so that you don't break the stem on your tube. This one is good.
Get yourself a solid bike multi-tool such as this one, and a portable tire pump. Those will take care of 99% of things that'll happen on your average commute.
It wouldn't hurt to have some spare tubes, but the last time I tried changing a tire on my bike, it snowballed into an $80 repair for a new chain and derailleur, so I've vowed not to do that again.
I've been carrying this one. Also not sponsored.
I also rode on a set of Tannus airless tires for a year. Solves the problem entirely, but you give up a bit of comfort.
He is talking about this. Instead of using their overpriced proprietary cartridges you can use the 16 gram threaded cartridges meant for bicycle tire inflaters like these.
The Pedro's Domestique is $20 on Amazon. I really only have experience with their Prestige and Super Prestige, but we get a lot of life out of their pumps.
It's just a plastic/rubber gasket that will seal over a schrader or presta valve. Other popular pumps have a two-sided valve.
PDW Shiny Object CO2 pump and a few threaded cartridges
takes up very little space, super light, and fills your tube immediately. no need to pump for 20 minutes
I am using this.
https://www.amazon.com/BV-Ergonomic-Automatically-Reversible-Schrader/dp/B0085OUN1O
I found an extension hose that might help.
https://www.amazon.com/dp/B07DCT5QQM/?coliid=I3OA4KI761SZEL&amp;colid=23C5W1Z9UWKXR&amp;psc=1&amp;ref_=lv_ov_lig_dp_it
BV Bicycle Ergonomic Bike Floor Pump with Gauge & Smart Valve Head, 160 psi, Automatically Reversible Presta and Schrader https://www.amazon.com/dp/B0085OUN1O/ref=cm_sw_r_cp_api_i_DApNDb3C4N6CW
Just one of these
Ha! Same pump that I bought here in america just a few weeks ago - http://www.amazon.com/gp/product/B001MK3GFS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&amp;psc=1
I'm using that setup in a 5 gallon Fluval Spec right now. Ditch the diffuser it comes with, its huge. Get the this [one] (https://smile.amazon.com/Fluval-Ceramic-88g-CO2-Diffuser-Ounces/dp/B004GCO35G/ref=sr_1_1?ie=UTF8&amp;qid=1486225190&amp;sr=8-1&amp;keywords=Fluval+diffuser)
You can also get threaded mini co2 canisters much cheaper than the fluval brand. $23 for a 15 pack. Each one lasts me about a month on 6 hours a day/ 1 bubble per second. link
Its a bit cumbersome, the valve takes some time to get used to. The slightest twist will either be too much or nothing at all. Its not automatic so you basically have to touch it twice a day, once to turn it on and once again to off. IF you have any questions let me know
I bought this thing after I had a similar experience to you. I've only had to use it a couple times in the year or so since, but it works well.
Well, I haven't used it but this one has four stars on Amazon.
Topeak JoeBlow Sport II is the most common floor pump I see used in bike shops around here. I've had one in use for about ten years and never had problem. Highly recommended.
I have an Innovations Ultraflate Plus. I like it because you can use 12 or 16 gram cartridges and both threaded and non-threaded. Buy the CO2 carts from Walmart or someplace similar where they sell BB guns (much cheaper than a bike shop)
If your bike pump is shrader you will either need an adaptor or you could just buy a floor pump that does both valve types. Something like this.
From Google image searching it looks like Presta valve. Quite a lot of pumps work with this type of valve except for the very cheapest of pumps. The valve is narrower than a schrader (like a car tire) valve, which allows your rims to be narrower and lighter because the hole in the rim for the valve is smaller.
As an example: http://www.amazon.com/Topeak-Blow-Sport-Floor-Pump/dp/B002B7LTBY/ref=sr_1_1?ie=UTF8&amp;qid=1415395593&amp;sr=8-1&amp;keywords=joe+blow
Once I got used to presta I actually greatly prefer it to schrader. I have some old bikes at my parents house that use schrader and probably will put presta tubes in em at some point just do be done with it.
I use one of these CO2 pumps - this with 2 cartridges is very small, cheap, and fits in my seat bag. I buy a 6 pack of cartridges for like $12. So $30 initial for 6 fills, and then $2 per refill.
I would recommend this pump to everyone.
I really like this pump I bought last year to mount on my frame. Good balance of compactness and utility, it has a pressure gauge, and the presta/schrader adapter stays in the pump in either configuration so I don't have to worry about losing extra parts.
Computer (Garmin Edge 500 Red Black Bundle)-
There is a newer model (510) and another level up (810) but I chose this for the simplicity and all weather visiblity. I read some reviews that said the 510's color screen was worthless in sunlight. Plus I got a good deal on it. The price has seemed to go up. The entire package came with pc, mount, HR monitor, cadence/wheel monitor.
Underseat Bag (Black Silkworm reflective trim seat / saddle bag for cycling)-
I like it, but wish it was slightly bigger. That said, I have a set of tire levers, emergency tool kit, patch kit, spare tube, and can fit my phone in it if needed (galaxy nexus).
Frame pump (Topeak Pocket Rocket Master Blaster Bike Pump)-
I'm wishing i had gone for a model with a pressure gauge in it or gone for a CO2 kit, while it works well, it is a pain to pump up a tire to full pressure.
Mount a pump to the frame under the water bottle cage.
I like the Topeak Road Morph
Get a Saddle Bag and fill it with
Optional but handy
Bike Multi Tool
2 CO2 cartridges
CO2 Tire filler
Hey, I was very recently in the same place as you. I bought my first road bike this summer and my first few rides were plagued by pinch flats. I think a large part of the problem was in fact my pump. It was a cheapy with no gauge on it.
I bought one of these joe blow pumps from my LBS. Best decision I made. No flats ever since (which is about 200 miles and a sprint triathlon in extremely crappy conditions). Although I am slightly saddened that I paid 20$ more for that same pump you see in the link, I'm glad its about the same price then as the pump you said you already have. It is a great pump and all you will ever need. Hope this helps.
I found this amazing sci-fi technology which can solve this problem completely!
like 1, basically.
depends how thorough you want to be with flushing air out of your carboy or whatever you're doing. i flushed mine using maybe 3/4 of the cartridge (obviously no way to know this for sure), then came back to it again when i needed it next, and it was empty. (i think my injector/dispensor deal was pretty cheap and probly leaked) so from then on i just used a full cartridge each time. good news is they are (sorta) cheap. but not 5lb C02 tank, cheap.
I picked up an Ultraflate Plus recently from my LBS. It's got a trigger lock, can use threaded and non-threaded CO2 cartridges and fits both Presta and Schrader valves. Haven't had to use it just yet but seems solid.
Topeak Joe Blow Sport II Floor Pump
This one has lasted well for me, gets up to road bike pressures, and comes with attachments for balls and mattresses.
The Lezyne Steel Floor Drive Pump might be more of what you are looking for.
https://www.amazon.com/dp/B005UZP2ZS/ref=cm_sw_r_sms_c_api_zarGzbBMMJNBR
Micro portable floor pump. I can seat a bead with this pump with a spare inner tube on my fatbike. Worth every penny.
> track pump
Nothing's popping up on Amazon, but how does [this] (https://www.amazon.com/BV-Ergonomic-Automatically-Reversible-Schrader/dp/B0085OUN1O/ref=sr_1_4?s=outdoor-recreation&amp;ie=UTF8&amp;qid=1519801338&amp;sr=1-4&amp;keywords=bicycle+pump) look?
The spam filter removed your post because it thinks your Amazon url's are affiliate links. If you shorten them like below, Reddit won't filter them out.
You can also remove the human readable part and just make them /dp/CODEVALUE and they will work.
The smaller cannisters works on mine of the same size. I don't even get the larger ones, because every inflator I have leaks out after a day or two once it's used.
Btw, you can buy a pack of 30 on Amazon for $40 or 1 at your local bike shop for around $3.
https://www.amazon.com/dp/B0015V45F4
I have this and have no issues. Nice, sturdy pump.
http://www.amazon.com/gp/product/B001MK3GFS/ref=oh_details_o02_s00_i00?ie=UTF8&amp;psc=1
I own this one. And while it is a bit pricy, it has a solid feel to it. And adjustable knob to control flow.
http://www.amazon.com/gp/aw/d/B003M2PNGY/ref=mp_s_a_1_1?qid=1377499126&amp;sr=1-1&amp;pi=SL75
Don't forget a pocket tire pump for after you field repair your tube!
That's what I originally bought... well it came with one, but I use these because they're way cheaper.
http://www.amazon.com/gp/product/B0015V45F4
I bought a C02 powered inflator at a bicycle shop, carry 3 charges and a plug kit. Should work fine, though I only used it once on a bicycle. Here’s an example:
Pro Bike Tool CO2 Inflator, Quick & Easy, Presta and Schrader Valve Compatible, Bicycle Tire Pump for Road and Mountain Bikes, Insulated Sleeve, No CO2 Cartridges Included https://www.amazon.com/dp/B017KU1DIK/ref=cm_sw_r_cp_api_i_buSCCbNFR1GHD
Unless you're willing to constantly monitor the tank, I really don't recommend this CO2 setup. You're much better off with a paintball setup like the one Aquatek makes.
If you disregard my warning and do decide to go with the mini, these are the cartridges I use. Each lasts about a week.
Where are you located?
I have a Diamondback shock pump and one of these floor pump if you interested
Performance Bike Floor Pump with Gauge & Glueless Puncture Kit - Rapid T-Valve - Simple Switch from Presta to Schrader Valves https://www.amazon.com/dp/B017ADD9N4/ref=cm_sw_r_cp_api_i_kZo0CbDKKBCCQ
If they are these : http://www.amazon.com/Genuine-Innovations-G2153-Threaded-Cartridge/dp/B000660N1O
Then bicyclists use them to quickly fill their tires, after a puncture & fix.
I bought an inexpensive Topeak Pocket Rocket. It comes with a plastic thingie that lets you attach it underneath your bottle cage, so you don't take up all of your lugs.
That's a foldable lock. I have a very similar setup but my pump is silver.
Edit:that's the one with the bottle cage mount I use:
https://www.amazon.com/Topeak-Pocket-Rocket-Master-Blaster/dp/B000FI6XGC
http://www.amazon.com/Topeak-Road-Morph-Bike-Gauge/dp/B000FI6YOS/ref=sr_1_1?ie=UTF8&amp;qid=1370837529&amp;sr=8-1&amp;keywords=topeak+road+morph
Here are some ideas
http://www.amazon.com/Surly-Nice-Rack-Black-Cromoly/dp/B001GSQULS
http://www.arkel-od.com/us/all-categories/touring-bike-bag/t-42-lite-touring-panniers.html#!/more-details
http://www.amazon.com/Brooks-Saddles-Special-Bicycle-Saddle/dp/B001AYMOAY/ref=sr_1_1?ie=UTF8&amp;qid=1367506572&amp;sr=8-1&amp;keywords=Brooks+B17+Special+Saddle
http://www.amazon.com/Topeak-Alien-26-Function-Bicycle-Tool/dp/B000FIE4AE/ref=sr_1_3?ie=UTF8&amp;qid=1367506625&amp;sr=8-3&amp;keywords=topeak+multitool
http://www.amazon.com/Topeak-Road-Morph-Bike-Gauge/dp/B000FI6YOS/ref=pd_sim_sg_10
http://www.amazon.com/Crane-Suzu-Lever-Strike-Brass/dp/B001MS2KHA/ref=pd_sim_sg_90
http://www.amazon.com/Velo-Orange-Hammered-Alloy-Fender/dp/B004JKK1V0/ref=sr_1_1?ie=UTF8&amp;qid=1367506912&amp;sr=8-1&amp;keywords=velo+orange+fenders+hammered
http://www.amazon.com/Ergon-Series-Bicycle-Handle-Standard/dp/B0015QWRM2/ref=sr_1_1?s=sporting-goods&amp;ie=UTF8&amp;qid=1367506936&amp;sr=1-1&amp;keywords=ergo+grips
http://www.amazon.com/Spenco-Classic-Glove-Beige-Crochet/dp/B0025UEWR0/ref=sr_1_1?ie=UTF8&amp;qid=1367507174&amp;sr=8-1&amp;keywords=spenco+gloves
http://www.amazon.com/Keen-Commuter-Cycling-Shadow-Gargoyle/dp/B003Z4KPFI/ref=sr_1_cc_1?s=aps&amp;ie=UTF8&amp;qid=1367507250&amp;sr=1-1-catcorr&amp;keywords=keen+bike
http://www.amazon.com/Gold-Bond-Medicated-10-Ounce-Containers/dp/B001G7QSS4/ref=sr_1_cc_2?s=aps&amp;ie=UTF8&amp;qid=1367507286&amp;sr=1-2-catcorr&amp;keywords=gold+bond
I buy them in bulk off of amazon. One box usually lasts a season.
Under $25 bucks: This + this
Tube
Levers
Frame pump (or alternatively CO2 inflator)
Patch kit (optional)
Saddle bag
I buy this one
I have https://www.amazon.com/gp/product/B000RYBGAC/
and the suggested CO2 carts. You can get them for a dollar apiece in larger lots. I think just one charger will get a tire from almost flat to useable, but it would take two or three to fill it up all the way.
Another option is https://www.amazon.com/Genuine-Innovations-G2628-Ultraflate-Inflator/dp/B002AGI1QW/
Its a little larger, but it's slightly cheaper and you can fill your tires with whipits in a pinch
https://www.amazon.com/dp/B002B7LTBY/
http://www.amazon.com/Topeak-Blow-Sport-Floor-Pump/dp/B002B7LTBY
I purchased the joe blow 2 a few months ago. I've had to use it about every weekend to repair flats. So far it's done its job.
Not a pump, but this has saved me and quite a few stranded cyclists out. Portland Design Works Shiny Object CO2 Inflator
Rev $1600
Helmet - $42
https://www.amazon.com/gp/aw/d/B0091PBOL4?ref=ppx_pt2_mob_b_prod_image
Phone mount - $17.00
https://www.amazon.com/gp/aw/d/B078L18FTZ?ref=ppx_pt2_mob_b_prod_image
Pump - $28.50
https://www.amazon.com/BV-Ergonomic-Automatically-Reversible-Schrader/dp/B0085OUN1O/ref=mp_s_a_1_3?keywords=bv+bike+pump&amp;qid=1566320951&amp;s=gateway&amp;sprefix=bv+bike+&amp;sr=8-3
Lock - $50
https://www.amazon.com/gp/aw/d/B06XZT8KZ1?psc=1&amp;ref=ppx_pop_mob_b_asin_title
This is turning into some real money for something I really don’t need.
I’ve used this one for years BV Bicycle Ergonomic Bike Floor... https://www.amazon.com/dp/B0085OUN1O?ref=ppx_pop_mob_ap_share
I was looking at this one just now,
I just started using an under seat bag; here's what's in it:
1 replacement tube.
1 Pro Bike Tool CO2 Inflator with cartridge.
1 Topeak Alien II Multi Tool
I'm trying to pare down the stuff I carry so I can start doing rides sans backpack (normally I'm a commuter). When I do commute the backpack also contains a mini pump, more tubes (2 each for both of my bikes) and a 15mm wrench for my single speed bike. Also a leatherman and a set of tire levers.
http://www.amazon.com/Topeak-Road-Morph-Bike-Gauge/dp/B000FI6YOS/ref=sr_1_1?s=sporting-goods&amp;ie=UTF8&amp;qid=1375590423&amp;sr=1-1&amp;keywords=road+morph+g
This. Tops out at 160 psi. I have no trouble getting my tires up to 120psi.
I don't even know what three of the four wrenches are even for. OP rides a fixie with no brakes. A wrench and two allen keys can loosen/tighten every nut and bolt for roadside maintenance.
CO2 is a must. I use this one. Accidentally blew the gasket out once but overall haven't had an issue at all.
Bulk threaded 16g cans cost the same per gram as those bulk unthreaded 12g cans you linked. It's not necessarily a savings.. One $1 16g canister will get me up to riding pressure but I'd need to use two $0.65 12g canisters.
I've just been using a basic foot pump (like this one) that I already owned, but I've been meaning to get something with a digital pressure gauge. That $100 model seems overkill, I'm seeing similar products on Amazon for $50-60.
I've been using a Topeak "Road Morph" and it absolutely rules. It's got a little flip out foot thing, pressure gauge and can handle high pressures.
I even convinced Topeak to mail me some replacement parts so I can rebuild the thing on the road if I need.
Avoid the plastic heads/housings. I've had those fail under such light usage and swore off them.
Since then my go to has been this Portland Design Works head. It is fantastic and quality.
Portland Design Works Shiny Object CO2 Inflator https://www.amazon.com/dp/B003M2PNGY/ref=cm_sw_r_cp_api_8MamzbDR0GC14
I have that same pump.
About half of each pump motion leaks out of the head instead of into the tire. Seems it blew a seal constantly pushing my tire to 110 psi.
I bought this one on Amazon this week to replace it. Not sure how I feel about that one... fighting to get the presta head to open the valve on my tire sometimes.
I think it might be possible. Obscenely difficult, but possible. I have a theory that if you used something like a CO2 charger you could give a quick little burst into the bottle and then fill it with a bottler, then top it with another burst.
The issue then comes from how you stop a vacuum from forming in the container that you're bottling from (probably your fermenter). You'd almost need to do a closed/pressure transfer, and depending on what you're fermenting in this would rage from challenging to outright dangerous.
I have a mountain bike with fat on/off road tires and they get filled to ~55 psi for road use.
My bicycle pump is all I ever use to fill up my motorcycle tires, and I've used it on my car tires in a pinch, though it does take 5-10 minutes or so for car tires if they are really low!
If I buy the Genuine Innovations Ultraflate Plus tire inflator will any Co2 cartridge work? I won't be limited to Genuine Innovations expensive ass branded cartridges will I?
Something like [this](http://www.amazon.com/Mosa-Gram-Threaded-Cartridges-Pack/dp/B0015V45F4/ref=sr_1_2? ie=UTF8&qid=1406591549&sr=8-2&keywords=co2+bike+cartridges) would work?
really? I am a emtb rider and I use one of those to adjust my suspension sag, I cant imagine using one of those to pump up a tire, you would be there all day jacking it, that pump is not designed for any volume of air but for small volume at high pressure. Now I have been taking my Pro Bike Tool CO2 Inflator https://www.amazon.com/dp/B017KU1DIK/ref=cm_sw_em_r_mt_dp_U_vC6oDb9G2RJYK with slimed tubes, just in case, but I have not had to use it yet. Knock on wood.
Sometimes the rubber seal is bad and you can't pump the wheels. Either this or you might have used to wrong side of the pump. If you have the tall slim valves you need to use one side, if you have the sorter, chubbier valves then it's the other side.
Gas station can be bad because it's pumping a lot of air very fast so if you're not careful you'll blow your tire with too much air.
That said, lots (most?) bicycle stores will let you pump for free.
Or get a floor pump off amazon, they're not that expensive and you don't need a super duper one if you're only going to use it once in a while (i.e. you're not a pro shop). This one is nice: https://www.amazon.ca/BV-Steel-Floor-Gauge-Yellow/dp/B0085OUN1O
If you want something to fill the tire quickly, go with CO2 canisters, you can't get any quicker than that. If you want something a little more failsafe, I have the Topeka Road Morph G. It's a little bulkier than most, but I've found it very reliable, and can fill high pressure road tires rather quickly. There's another version for mountain bikes which doesn't work as well on high pressure but works to fill up the large volume quickly.
Unless that strip has some sort of adhesive preventing it from allowing even the slightest amount of leakage, I'd replace it with a high quality tape like gorilla tape. You should be able to remove it with a razor blade. I wouldn't trust those plastic strips out on a trail, but that's me.
I'm not sure of the kinds of adapters you can get for presta and an air compressor as my rim came pre drilled with schrader holes, and have no experience using one of these, but have heard that it works well and is something you can take with you on the trail in the event you lose a bunch of air pressure from a burp or puncture.
I don't think something like that would work. The point is to hit the stem with a blast of air such that it forces the walls of the tire to seat into the bead as it has nowhere else to go. Whatever you get/use has to be able to attach to the valve stem itself to seat the bead.