Reddit mentions: The best clock hardware
We found 23 Reddit comments discussing the best clock hardware. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 15 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Creative Hobbies Quartz Clock Motor Movement, C91MQS, 3/8 Inch Max Dial Thickness, 7/16 Inch Threaded Shaft Length, Complete Kit
- Includes everything needed to repair, replace, or make your own DIY clock project!
- Accurate to 2 minutes a year and runs up to 2 years on one AA Battery (not included)
- Includes hardware, hanger, 3" gold hands.
- Measures 2-1/8" Square x 5/8" thick with 5/16" diameter shaft for 3/8" hole.
Features:
Specs:
Weight | 0.04 Pounds |
2. Seiko Quartz Movement, Black
Continuous, smooth sweep motion removes any Ticking noise1/4" Maximum dial Thickness; 5/8" Total Hand shaft LengthAuthentic Seiko brand clock movement, marked as Skip (Seiko precision ) on the backsideIncludes a pair of Black spade 2-1/2" Hour and minutes hands, a Red 2-3/4" Second hand, and mountin...
Specs:
Color | Black |
Height | 2 Inches |
Length | 2 Inches |
Weight | 0.01 Pounds |
Width | 2 Inches |
Number of items | 1 |
3. Mudder Clock Movement Mechanism, 3/ 25 Inch Maximum Dial Thickness, 1/ 2 Inch Total Shaft Length
- Suitable for repairing, replacing or making a clock
- Quartz clock movement mechanism repair tool
- Applicable to cross-stitch, three-dimensional embroidery, craft clock, etc.
- Movement shaft: 13.5 mm, thread length 6 mm
- Mute scanning movement, suitable for 1 - 3 mm thickness clock panel
Features:
Specs:
Color | Black |
Height | 1.18 Inches |
Length | 7.87 Inches |
Weight | 55 Grams |
Width | 5.12 Inches |
4. Mudder Long Spindle Quartz Clock Movement, 1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length (Black)
- Long spindle quartz clock replacement movement parts with metal hook
- The clock hand shape is water drop, color is black; Suitable for repairing, replacing or making a clock
- Applicable to cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, etc.
- Total shaft length: 23 mm (9/ 10 inches); Thread length: 15.4 mm (3/ 5 inches)
- Jump second movement, suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel
Features:
Specs:
Color | Black |
Height | 9.7 Inches |
Length | 5.1 Inches |
Weight | 0.1543235834 Pounds |
Width | 1.8 Inches |
5. Gleader Clock Movement Mechanism with White Hour Minute Red Second Hand DIY Tools Kit
High quailty and brand new.Great choice for DIY design.Easy and simple designGreat for repairing, replacing or making a clock
Specs:
Weight | 0.07 Pounds |
6. Mudder DIY Clock Movement Mechanism, 3/ 25 Inch Maximum Dial Thickness, 1/ 2 Inch Total Shaft Length
Good for repairing, replacing or making a clockQuartz clock movement mechanism repair toolApplicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.Movement shaft: 13.5 mm,thread length 6 mmMute scanning movement, suitable for 1 - 3 mm thickness clock panel
Specs:
Height | 0.0393700787 Inches |
Length | 7.480314953 Inches |
Width | 4.330708657 Inches |
7. SE Universal 4 Prong Brass Clock Key for Winding Clocks, Odd and Even Numbers (2 PC.) - JT6336-2
- 4 prong odd sizes: 3, 5, 7, and 9
- 4 prong even sizes: 2, 4, 6, and 8
- Made of brass
- 2 pieces
- Universal clock key is used to wind most clocks
Features:
Specs:
Height | 4 Inches |
Length | 5.75 Inches |
Weight | 0.022 Pounds |
Width | 0.25 Inches |
8. Mudder Hands Clock Movement, 3/25 Inch Maximum Dial Thickness, 1/2 Inch Total Shaft Length (Gold)
- Good for repairing, replacing or making a clock
- Quartz clock movement mechanism repair tool
- Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
- Movement shaft: 13.5 mm, thread length 6 mm
- Mute scanning movement, suitable for 1 - 3 mm thickness clock panel
Features:
Specs:
Color | Gold |
Height | 2.1653543285 Inches |
Length | 0.6299212592 Inches |
Width | 1.49999999847 Inches |
9. Mudder Silence Quartz Clock Movement, 11/25 Inch Maximum Dial Thickness, 4/5 Inch Total Shaft Length (Black)
- DIY quartz wall clock replacement movement parts; Note: black on the front and silver on the back
- Suitable for repairing, replacing or making a clock
- Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
- Total shaft length is 20 mm (4/ 5 inches), thread length 14 mm (3/ 5 inches)
- Mute scanning movement, suitable for 8 - 11 mm (3/ 10 - 11/ 25 inches) thickness clock panel
Features:
Specs:
Color | Black |
Height | 0.6299212592 Inches |
Length | 2.1653543285 Inches |
Weight | 0.09 Pounds |
Width | 2.1653543285 Inches |
10. High Torque Quartz Clock Movement Clock Replacement Mechanism with 12 Inch Long Spade Hands for DIY Clock (Black, Shaft Length 1/10 inches/ 23 mm Shaft Length)
Clock movement details: high torque clock movement replacement with hook, long shaft, drive long clock hands (10 mm to 450 mm)Total shaft length: 23 mm (1/ 10 inches), with thread length 11.7 mm (9/ 20 inches), jump second movement suits for 4 - 8 mm (4/ 25 - 3/ 10 inches) thickness clock panelSize ...
Specs:
Color | Black |
Height | 7 Inches |
Length | 17 Inches |
Width | 13 Inches |
Size | Shaft Length 1/ 10 inches/ 23 mm Shaft Length |
11. Mudder 31 mm Long Shaft Quartz Clock Movement DIY Clock Repair Kit (Silver)
Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needsMovement size: shaft length is 31 mm (1-1/ 5 inch); Thread length is 24.6 mm (24/ 25 inch); Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel...
Specs:
Color | Silver |
Height | 2.17 Inches |
Length | 0.63 Inches |
Weight | 0.0881849048 Pounds |
Width | 0 Inches |
12. 12888 Quartz DIY Wall Clock Movement Mechanism Repair Parts Replacement Kit Sweep Silent Movement,13mm (1/2 Inch) Maximum Dial Thickness, 23mm (29/32 Inch) Total Shaft Length.(White Hand)
.Good for repairing, replacing or making a clock..Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions..Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTI...
Specs:
Color | White Hands |
Height | 2.2 Inches |
Length | 0.63 Inches |
Weight | 0.02 Pounds |
Width | 0 Inches |
Size | 29/32"thread length |
13. Mudder Quartz Clock Movements Mechanism Parts, 3/25 Inch Maximum Dial Thickness, 1/2 Inch Total Shaft Length
- DIY quartz wall clock replacement movement parts, suitable for repairing, replacing or making a clock
- Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
- Mute scanning movement, total shaft length is 13 mm (1/ 2 inches), thread length 6 mm (6/ 24 inches), suitable for 1 - 3 mm (1/ 25 - 3/ 25 inches) thickness clock panel, please check the size before purchasing
- Hand color: this hand features black front and silver back; Please check it when receiving the item
- Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent, please check the sizes before buying
Features:
Specs:
Height | 2.1653543285 Inches |
Length | 0.6299212592 Inches |
Weight | 0.11 Pounds |
Width | 0.01181102361 Inches |
14. Quartex Q-80 Quartz Clock Movement, 1/2” Maximum Dial Thickness, 15/16" Hand Shaft Length
- 10 Year Warranty
- 1/2" Maximum Dial Thickness; 15/16" Total Hand Shaft Length
- 5/16" Shaft Diameter
- Case Size: 2 7/32" Square x 5/8" Depth
- Hands Included; Black, Spade, 4"
Features:
Specs:
Color | Black |
Height | 2.2 Inches |
Length | 2.2 Inches |
Width | 0.63 Inches |
🎓 Reddit experts on clock hardware
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where clock hardware are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
It's actually pretty easy. You can use almost any kind of drive you want. Electric, battery operated would be by far the easiest. You'd keep the case, AND the clock face. Remove the hands that came with it, remove the clockworks, then replace it with something like this $8 buck one from Amazon:
https://www.amazon.com/Creative-Hobbies-Movement-C91MQS-Thickness/dp/B01N7WOWU3/
If you want to still do the clock thing you could buy the blink vinyl record of your choosing and one of these and just DIY:
DIY Clock part
Has the added benefit of being made by you which equates to hopefully a better "response" from her.
Maybe make the middle into a clock? With colorful spices that would spin around it, that would be neat.
​
Really cool find!
​
https://www.amazon.com/Gleader-Movement-Mechanism-Minute-Second/dp/B00L315MDA/ref=asc_df_B00L315MDA/?tag=hyprod-20&linkCode=df0&hvadid=343227730716&hvpos=1o2&hvnetw=g&hvrand=2586279959191731227&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9061125&hvtargid=pla-706594908862&psc=1&tag=&ref=&adgrpid=69721953595&hvpone=&hvptwo=&hvadid=343227730716&hvpos=1o2&hvnetw=g&hvrand=2586279959191731227&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9061125&hvtargid=pla-706594908862
You can buy a small one. We usually use SwimOutlet but if you know any swimsuit sellers at swim meets, you can ask them if they would be able to buy something for you and most of the time they will.
Or build your own (not attempted by me)!
https://www.amazon.com/Seiko-Torque-Continuous-Sweep-Quartz-Movement/dp/B005LH5Q88
https://www.ebay.com/itm/High-Torque-Clock-Movement-Silent-Extended-Shaft-with-Large-17-3-4-Hands/263392752501?hash=item3d536e7375:g:ZswAAOSwYc5aPrOA
and put it all on cardboard or get creative!
Is the clock mechanism silent? My wall clock at the moment has one of the quartz movement mechanisms in the little black brick with an AA battery similar to this https://www.amazon.co.uk/Quartz-Movement-Mechanism-Maximum-Thickness/dp/B017LVILNI , and there's a definite tick with the second hand when the room is quiet.
> Are clock keys fairly interchangeable
Some are. :)
https://smile.amazon.com/SE-JT6336-2-Universal-Winding-Numbers/dp/B0040ZZTNY
Although you need to know if its worth buying. Does the pin in the hole have a square end on it? If so, that's probably the winding hole.
Thankyou :), I got them off amazon:
https://www.amazon.co.uk/gp/aw/d/B01L1KLY4S/ref=mp_s_a_1_21?ie=UTF8&qid=1511720673&sr=8-21-spons&pi=AC_SX236_SY340_QL65&keywords=clock+mechanism&psc=1
But there are plenty other websites with all weird and wonderful styles if you need something specific
I just used a generic one that I found off of Amazon, like this.
Amazon, of course. Pay attention to the shaft length (there are many to choose from) and make sure it matches the thickness of your material. Here's the one I used: https://www.amazon.com/gp/product/B01LXWJFPW/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
It should be fine as long as the arms are weighted such that the center of mass is lined up with the hole the clock hardware goes through (within reason, obviously). He likely got a "high torque" one, too.
And on his other reddit page he linked to his etsy, which says he used aluminum for the arms.
Honestly, if you're that worried, remove the platters and buy a cheap clock unit and stick it through them. You can justify keeping it, hang it on your wall, and it still never leaves your sight.
Thanks... I think it was this kit from Amazon.
https://www.amazon.com/Hicarer-Torque-Movement-Replacement-Mechanism/dp/B07FCDYPWX/ref=mp_s_a_1_6?keywords=12+inch+clock+hands+and+motor+kit&qid=1564963040&s=gateway&sprefix=12+inch+clock&sr=8-6
Got the idea from [this post] (https://www.reddit.com/r/Jeep/comments/7tje1v/i_made_this_cj7_timing_chain_into_a_clock/) and made a desk clock with the old timing set and crank pulley from the MJ. Also used some 1" iron pipe and a fitting to make the stand. The clock mechanism was $9 on amazon.
Here it is, I bought this from Amazon UK. Maybe you can get something similar.
https://www.amazon.com/Quartex-Quartz-Movement-Maximum-Thickness/dp/B005LI5IR6/ref=pd_lpo_60_bs_t_2?_encoding=UTF8&psc=1&refRID=NDKV6T9FC7WG13329RNC
Here is the same link without the shortened link
https://www.amazon.com/dp/B01LXWJFPW/ref=twister_B01LZ79CBP?_encoding=UTF8&psc=1
You don’t need a branded key, you just need one of the right size.
If you have a reliable set of calipers, you’ll be able to get a general idea of what size key you need. Alternatively, you could try a supposedly universal key.
Dude add some battery powered clock hands to the colonel and I'd put it in my living room
12888 Quartz DIY Wall Clock... https://www.amazon.com/dp/B077NDRY21?ref=yo_pop_ma_swf this is the one I used
[Could try to make one?]
(http://www.amazon.com/BATTERY-OPERATED-CLOCK-MOVEMENT-HANDS/dp/B00149K1VO/ref=sr_1_12?ie=UTF8&qid=1347288843&sr=8-12&keywords=make+your+own+clock+kit)
Here is the desktop version of your link