Reddit mentions: The best extra long drill bits
We found 9 Reddit comments discussing the best extra long drill bits. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 7 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Bosch BL2731 1/16 In. x 12 In. Extra Length Aircraft Black Oxide Drill Bit
- Speed helix design for three times faster drilling than standard bits
- Last 50 percent longer than high-speed steel
- Easier drilling, reduced heat and extended drill bit life
- Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
- For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
Features:
Specs:
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Size | 1/16" |
Width | 0 Inches |
2. Drill America 1/8" x 18" High Speed Steel Extra Long Drill Bit, DWDDL Series
High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistanceBlack oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edgeRound shanks allow use wi...
Specs:
Number of items | 1 |
Size | 1/8 in |
3. Irwin Tools 99708 Extra-Long Spade Bit, 1/2", 16"
Extra-Long Spade BitsBlue-Groove point and cutting edge for faster chip removal - 4x faster than standard spade bitsDouble cutting spurs scribe the outside of the hole reducing breakout10% larger shank for added durabilityGrooved hex shank prevents slipping in drill chuck or bit extension
Specs:
Color | Multi |
Height | 0.094 Inches |
Length | 16.5 Inches |
Number of items | 1 |
Size | 1/2", 16" |
Weight | 0.26 Pounds |
Width | 2.25 Inches |
4. Drill America 27/64" x 18" High Speed Steel Extra Long Drill Bit, DWDDL Series
High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistanceBlack oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edgeRound shanks allow use wi...
Specs:
Color | Uncoated (Bright) |
Number of items | 1 |
Size | 27/64" |
5. Irwin Tools 99712 Extra-Long Spade Bit (24 Pack), 3/4", 16"
Extra-Long Spade BitsBlue-Groove point and cutting edge for faster chip removal - 4x faster than standard spade bitsDouble cutting spurs scribe the outside of the hole reducing breakout10% larger shank for added durabilityGrooved hex shank prevents slipping in drill chuck or bit extension
Specs:
Color | Multi |
Height | 0.167 Inches |
Length | 17.5 Inches |
Number of items | 1 |
Size | 3/4", 16" |
Weight | 0.92 Pounds |
Width | 1.5 Inches |
6. Irwin Tools 99716 Speedbor Blue-Groove Extra-Long Spade Bit, 1-Inch x 16-Inch, 24-Pack
- Extra-Long Spade Bits
- Blue-Groove point and cutting edge for faster chip removal - 4x faster than standard spade bits
- Double cutting spurs scribe the outside of the hole reducing breakout
- 10% larger shank for added durability
- Grooved hex shank prevents slipping in drill chuck or bit extension
Features:
Specs:
Height | 0.167 Inches |
Length | 17 Inches |
Number of items | 1 |
Size | 1", 16" |
Weight | 0.11 Pounds |
Width | 1.5 Inches |
7. 3" Magnetic Power bit Extension - Screw Sleeve …
- Bark collar
Features:
Specs:
Color | Cosmic cobalt |
🎓 Reddit experts on extra long drill bits
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where extra long drill bits are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
If this is something you do regularly you can just buy super long drill bits.
https://www.amazon.com/Bosch-BL2731-16-Inch-Black-12-Inch/dp/B003NFJZ46/ref=lp_256270011_1_14?s=power-hand-tools&ie=UTF8&qid=1468680461&sr=1-14
I’ve had a really long, skinny drill bit save me more than once. Drill it in as an exploratory bit, 1/4” it is alot easier to patch than a 3/4” whoops.
Also if you need to hit a stud cavity for a switch or plug but you can’t find the header from the top; have someone shoot the tiny bit into the corner of the room, then drilling down into the stud cavity from the top isn’t a guessing game.
18” 1/4” diameter bit; find it cheaper somewhere else
Or, you could just keep one of these in your truck. They really come in quite handy. Goes through drywall very easily and also allows you to drill test holes in wood, etc.
I think they make drill bit extensions for under $10 or something silly like this
xtra long bit
One of these
https://www.amazon.com/Irwin-Tools-99708-Extra-Long-Spade/dp/B002FCRL1W/ref=sr_1_3?ie=UTF8&qid=1539231110&sr=8-3&keywords=long+spade+drill+bits&dpID=11g%252BaZAW0BL&preST=_SY300_QL70_&dpSrc=srch
And a bunch of these
https://www.ebay.com/itm/2PC-Drill-Bit-Extension-Bar-12-6-Paddle-Bits-or-any-1-4-shank-Extender-Shaft-/122852046000
And really, please don't.
Drill America DWDDL Series High-Speed Steel Extra Long Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 27/64" Size, 18" Length (Pack of 1) https://www.amazon.com/dp/B00FXHKQMC?ref=yo_pop_ma_swf
This is what I have. I figured it would be ok.
Personally I have had nothing but bad luck with those auger style bits. Much prefer spade type :
https://www.amazon.com/Irwin-Tools-99712-Extra-Long-Spade/dp/B002FCNDDC
There are sleeved drivers that keep the blade centered. I have one made by Makita, but it was pricey (~$10). Here's a cheaper example.
Should be able to see what you have to drill through. Providing you have nothing in the way (like electrical wiring) you can purchase an extra long drill bit for this job. Here is one example:
http://www.amazon.com/Irwin-Tools-99716-Blue-Groove-Extra-Long/dp/B002FCNBES/ref=lp_256270011_1_17?s=power-hand-tools&ie=UTF8&qid=1464453752&sr=1-17