Reddit mentions: The best filament tape
We found 13 Reddit comments discussing the best filament tape. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 5 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Scotch Film Strapping Tape 8896
Synthetic rubber adhesive has excellent bond strength to a wide variety of application surfacesAppliance, electronics, general industrial, metal working and glass manufacturingTensilized polypropylene tape, clean removal, strapping tape, shipping, holding, securing, keeping closed and stabilizing.
2. XFasten Filament Duct Tape, Transparent, 2 Inches x 30 Yards, Extreme Fiberglass Reinforced Cross Strapping Tape
High performance transparent duct tape that is ideal for general repair where appearance does matter.Smooth lined design finish, clear utility-grade duct tape that is perfect for maintenance, wrapping, sealing, fixing, patching and protectingWeatherproof, water, moist resistant, UV and temperature r...
Specs:
Color | Transparent |
Height | 1.7 Inches |
Length | 4.3 Inches |
Size | 1 Pack (Single Roll) |
Weight | 0.4 Pounds |
Width | 4.3 Inches |
3. T.R.U. FIL-795 Filament Strapping Tape: 2 in. Wide x 60 yds. (4 Mil) (Pack of 1)
- Rubber resin adhesive that bonds to fiberboard, plastic, and metal surfaces.
- Polypropylene backing provides excellent resistance to nicks, abrasion, moisture, and scuffing.
- Ideal for bundling tubes, cartons, palletizing, or unitizing.
- 3 in. core - 4 Mils Thick - 69 oz/in. adhesion
- Resistant to tears; fiberglass strands require cutting
- 100% SATISFACTION GUARANTEE, or we refund your money. GGR Supplies is a US Company Based in Florida.
Features:
Specs:
Height | 5 Inches |
Length | 5 Inches |
Size | 2" Inch x 60 yds. (Pack of 1) |
Weight | 0.61 Pounds |
Width | 2 Inches |
4. Scotch Strapping Tape 8896, Blue, 24 mm x 55 m
- Removes cleanly and resists stains on common surfaces, such as painted metal, plastic and glass
- Proprietary 3M pressure-sensitive rubber adhesive provides good adhesion to adhere to most surfaces
- Provides high tensile strength for long lasting hold
- Special polypropylene film backing provides proper stiffness
- Resists tearing, breaking, abrasion, moisture and scuffs
- High strength tape for utility bundling, reinforcing, and pallet unitizing applications
- Tape holds firm, removes cleanly with no adhesive residue
- Great adhesion to vinyl and other plastics, glass, and metals that are painted, unpainted, or powder coated
- Holds shelving, racks, doors, panels, cords and other parts in place, from plant to install
Features:
Specs:
Color | Blue |
Height | 9.37 Inches |
Length | 11 Inches |
Number of items | 1 |
Size | 1 Inches Width x 60 Yards Length |
Width | 11 Inches |
5. T.R.U. FIL-795 Filament Strapping Tape: 1/2 in. Wide x 60 yds. (4 Mil)
Rubber resin adhesive that bonds to fiberboard, plastic, and metal surfaces.Polypropylene backing provides excellent resistance to nicks, abrasion, moisture, and scuffing.Ideal for bundling tubes, cartons, palletizing, or unitizing.3 in. core - 4 Mils Thick - 69 oz/in. adhesionResistant to tears; fi...
Specs:
Height | 5 Inches |
Length | 5 Inches |
Size | 1/2" in. x 60 yds. (Pack of 1) |
Weight | 0.1875 Pounds |
Width | 0.5 Inches |
🎓 Reddit experts on filament tape
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where filament tape are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
The short answer is: It depends.
Any rim can be sealed off at the spoke holes with rim tape if you clean it thoroughly and use the right width of tape.
The tricky part is how well the tire will seat at the bead. Stan's Rims and Spank are two rim manufacturers that I know take extra care with this area (and I think simply use a slightly larger diameter at this critical point) so that tires will seal well without much latex milk being needed to help.
You can do a simple test on the cheap. Buy the 3M equivalent of Stan's expensive rim tape like this one and buy or borrow a tubeless valve like this one. Put your existing tire on without a tube, using just a little bit of soapy water. If it pops in and inflates, you're good to go.
Maybe someone has experience with your rim type. I swear by tubeless, and so far have tried on Stan's Flow and FlowEX, Spank Spike 35 and Oozy Trail 345, and a couple of sets of made in China carbon rims, and it has always worked well.
The much bigger issue IMO is the type of tire. Schwalbe was the company that started with the "tubeless ready" slogan, which I guess involves having a little more rubber on the bead to help with sealing, Conti used to be stupidly difficult but have also improved especially with the Apex sidewall, Maxxis always worked well. These are the ones I have personally tried.
You want to use duck tape to solve that problem. It won't look as cute as just wearing the diaper, but the right duck tape is the solution.
When I say "right duck tape" I don't just mean the kind that you pick up from the store. You want something that will be sticky and adhere to the material (whether cloth backed or plastic) so that it won't come loose.
I suggest this: https://www.amazon.com/Scotch-Tough-Transparent-Duct-Tape/dp/B0000DH8I8
Get the transparent kind, not any other kind. The material is light, and the adhesive is the best for either cloth or plastic. I found these back when ABU tapes were kind in need of a bit of help to stay affixed. This is what I used for that purpose.
Use the tape to just replace the taps. Fold the diaper wings in, and tape it as if the duck tape were the tapes that came with the original diaper. I know this works because I've done it.
I don't suggest any of these:
Almost any rim/tire combo can be made tubeless. Save some money and buy the tape on it's own: http://www.amazon.com/Scotch-Film-Strapping-Tape-8896/dp/B00QVIBIMO
You just need valves and sealant now.
If that doesn't work, go the sliced 20" tube route. Either should work fine, the tape is a more elegant solution.
USPS flat rate boxes were made for this. You separate it out into 5 medium flat rate boxes, pack it, overtape it tight with filament tape, and insure it for the full value. We do have a drop off location here as well.
EDIT: Look. It's not my first day at the rodeo. Pretty sure i've shipped a package or two and have a little bit of experience in the matter.
Obviously it needs to be shipped registered mail. I was in a hurry when i typed my note and missed it. That said, i'm not totally off. It IS priority mail. But you also have to buy registered. That's the only way to insure it for the full value anyway and i did say that. Troll on.
It has less to do with the Gorilla tape and everything to do with Compass tires being the most loosely defined "tubeless ready" product on the market. I say this as a fan, early adopter, and regular rider of Compass Tires, with multiple friends who work or have worked for Jan and Compass.
Anyway, the tape will be fine. If it's not, just remove it and apply some strapping tape.
FYI I just learned in another thread that Stan's Tubeless tape is just TESA 4289 strapping tape.
You can get the generic equivalent at ebay for $10 incl. shipping.
This 3M tape at Amazon is also supposed to do the same thing. Some of the widths are weirdly expensive for some reason, but may be available elsewhere.
T.R.U. FIL-795 Filament Strapping Tape: 1/2 in. wide x 60 yds. (4 Mil) https://www.amazon.com/dp/B01FYJKGS2/ref=cm_sw_r_cp_apip_Dm5MuX98ZNvGd
https://amazon.com/T-R-U-FIL-795-Filament-Strapping-Tape/dp/B01FYJKI8U