Reddit mentions: The best floor cord covers

I have no experience with Ssscat and not certain if it is safe. If you are looking for a spray - try one in this video.

Chewing cables is not destructive really, it's just something all bunnies do when cables are exposed. You simply need to try to proof the.

For chargers - get some chew proof charging cables here (we all forget to hide those, so it's good thing to have) - https://www.fusechicken.com/

​

Now I think there are way to bunny proof your wires on the floor:

1. Something like this is great if you can make it work in the space config you have... sims like this would be perfect if the wires run along the floor. Sold in any home depot or lows with many length and corners and all those things
   
2. Or try something like this - https://www.amazon.com/D-Line-Cable-Cord-Management-Length/dp/B008466PN8
   
3. Look on amazon - they make things to help you.
   
   ​
   
   Most important point - bunnies are smart and they need toys to entertain them and stay out of trouble. In the absence of good things to chew they will chew the other things - chewing and digging is their natural instinct, so the solution is not to spot them, but to provide alternatives specifically meant for them to chew and dig and to reinforce them using it. Bunnies are very food-motivated so you can use food to train them to do what you want them to do. :)I will mention some things to buy and make for toy for your bun below - don't think you need to get everything - start with some basic things and rotate toys to keep her interested. They do really understand positive reinforcement and build positive associations when you redirect bad behavior and reward good behavior. So you have to actively and diligently train the bunny overtime not to chew and dig the wrong things. Anytime you see digging or chewing, immediately try to offer a toy or some alternative instead and reward with a small treat when it works. This does need to be done very diligently each time you see him do things like that.
   
   ​
   
   So what to give as toys?
   
   
4. Bunnies like exporting type toys - tunnels, cardboard houses, willow and hay balls, chews, and treat puzzles . The two thread below have examples:
   
   1. https://www.reddit.com/r/Rabbits/comments/an8cut/rabbit_room_ideas/
      
   2. https://www.reddit.com/r/Rabbits/comments/ajf2vl/how_to_enrich_my_rabbits_life/
      
5. Also a couple suggestions below that are my personal favorites and all buns tend to enjoy:
   
   1. Treat/pellets ball - feed pellets in it vs a bowl
      
   2. Nesting cups - hide little treat bits between stacked cups, I have not met a bun who doesn't love these
      
   3. Plastic slinky - most buns love these
      
   4. Play house
      
   5. Dig box
      
6. Also try homemade things - the best I found was an empty egg carton stuffed wit favorite greens for him to figure out how to open. :)
   
   1. Or something like this https://www.reddit.com/r/Rabbits/comments/be338f/diy_pellet_dispenser/
      
   2. Or a homemade castle like this person did https://www.reddit.com/r/Rabbits/comments/bcl9p4/cardboard_castle/ - she has instructions on how to make one, send her a message.
      
7. Chew toys specifically - there are what you need to get to offer as alternatives to him chewing furniture!
   
   1. Willow and hay balls are great - good quality ones here https://shop.smallpetselect.com/collections/natural-toys-and-chews-for-rabbits
      
   2. They also have these logs where you can hide treats and pellets for fun - the bun would love to chew those I think and they last too. :)
      
   3. Great quality toys that are super fragrant and yummy to chew here https://www.farmerdavepetsupply.com/toys
      
   4. And thicker good chew sticks here https://www.farmerdavepetsupply.com/chew-sticks

i feel like this picture would look a bit better when its dark and the lights have a lot to flourish with. there are a few things you could do here that i think would be cool. you could get a monitor mount to make it look nicer and adjust it the way you want but thats super nitpicky. there are also boxes that you can put the cables into


like this https://www.amazon.com/Cable-Box-Organizer-Management-Protector/dp/B07PB87R9X/ref=sr_1_3?keywords=box+for+cables&qid=1574995908&sr=8-3. a random thing you could get would be a headphone holder. one above the desk or an underdesk one like


this https://www.amazon.com/Headphone-Headphones-Adjustable-Universal-EURPMASK/dp/B07BVK2FQW/ref=sxin_2_ac_d_rm?ac_md=0-0-aGVhZHBob25lIGhvbGRlcg%3D%3D-ac_d_rm&keywords=headphone+holder&pd_rd_i=B07BVK2FQW&pd_rd_r=94b61411-7a4c-4483-a218-db68b09d32cb&pd_rd_w=TsFkD&pd_rd_wg=Km2ug&pf_rd_p=e2f20af2-9651-42af-9a45-89425d5bae34&pf_rd_r=28GMMBRVWJ9NTJSBG2QQ&psc=1&qid=1574995987).

​

looks clean though, just random thoughts that you could look into only if you wanted

I'm sure there are but they're going to be expensive.

You have two cheaper options.

First is cable floor conduits. I don't know how that would play with your wheelchair but I can attest that these can withstand quite a bit of pressure.

Second is to run the cable up along a wall with cable clips. You said you didn't have anyone that could help, I'd suggest asking a friend or making friends with someone. Even just offering someone a sixpack to help you out would be fair, it's a ten minute job and all you need is a hammer.

The power tool cable is standard so it should be easier to fit around corners, you can also use most styles of romex connectors with it safely. It can be bought by the foot at most home improvement stores. (Assuming your in the US, I've found menards has the best prices if you buy a pre cut length of 25 or 50ft) the only thing is depending on what style of wire attachment the outlets have, you might need to use solid wire to make pigtails to the outlets.
Cable https://www.menards.com/main/electrical/electrical-cords-cord-management/extension-cords/cerrowire-reg-sjoow-portable-power-cable/283-3603a/p-1444439081484.htm

Using a wire protector from one of the legs to the wall (preferably close as possible to a wall outlet) would virtually eliminate any issues there. Something like this https://www.amazon.com/Floor-Cable-Cover-Protector-Sidewalks/dp/B079M4SJ39

Cables generally should be protected but your rabbit might not even be interested. Usually if they can’t see something they won’t care about it. Your 3D printer and larger pieces of plastic are generally safe. Rabbits like to find small threads and pull at them so big chunks of plastic and glass don’t really do it for them. In general cable management is good practice and satisfying. I hate the look of the rubber hose sleeves so I keep everything in cable runners and boxes. If I’m not using it then I tuck it away.

Simple Cord Cable Concealer On-Wall Cord Cover Raceway Kit - Cable Management System to Hide Cables, Cords, or Wires - Cord Organizer for Wall Mounted TVs and Computers at Home or in The Office https://www.amazon.com/dp/B01JKO8724/ref=cm_sw_r_cp_api_i_M6U0DbYGEWNRR


D-Line CC-1 Light Duty Floor Cord Cover/Cable Protector | Protect Cords and Prevent a Trip Hazard | 6 Foot Length | Cable Cavity 3/4" (W) x 3/8" (H) | Black https://www.amazon.com/dp/B0078NU4C6/ref=cm_sw_r_cp_api_i_a8U0Db5JJH0BY


Bluelounge CableBox Cable and Cord Management System,Black https://www.amazon.com/dp/B0019T0JA2/ref=cm_sw_r_cp_api_i_x8U0Db8A72131

I don't have a driveway, only street parking. My work has regular outlets in their garage so I charge there. Otherwise, I bought a 10guage 50' extension cord and run it from my backyard to the street to charge. Depends on your neighborhood of course, but mine is pretty safe.

Edit: oh sorry, didn't read the rest of your post. I'm not sure what my requirements are, pretty sure it's not legal to run the cord accros the sidewalk either. I did buy this to cover the cord on the sidewalk so that it is visible and allows wheelchairs/bikes to go over it without tripping people.

Looks like you are 1. Maybe in Europe, 2. Is that plumbing in the lower wall? Maybe you dont want to cut into the wall. Fastest and easiest thing is this http://smile.amazon.com/Wiremold-C30LG-Screen-Cover-White/dp/B000NO9G8A/ref=sr_1_6?ie=UTF8&qid=1462155807&sr=8-6&keywords=wiremold
or something similar. Its paintable also so paint it and it'll look great. Make sure you stick it up perpendicular with the TV and parallel with the door trim or it will look like balls.

This is pretty good, I've used it on apartments before I bought my house - you run it on the top of the baseboard, if you want to get fancy you can paint it the color of the baseboard and it just looks like it's molding on the baseboard itself. :)

I currently live in garden apartments (separate buildings without dedicated parking or charging setups). While I will be planning primarily charging at work with a backup of multiple superchargers within 10-20 miles, I would like to have a backup-backup for home 'emergency' charging (at least until/if I can get management to install dedicated charging stations). After reviewing several places here and elsewhere online, it seems the recommendation would be to get a 10-gauge extension cord if I'm going to be using a 'normal' 3 prong grounded outlet.

Anyone think there are any issues/recommendations with the following from Amazon? (either 50ft or 100ft, measuring the distance today when I can):

• Cord - https://smile.amazon.com/dp/B0787G82GR/?coliid=I2B6SMSWPR1FA3
  
• Cord protector (for where it passes over sidewalk) - https://smile.amazon.com/dp/B0741PRVTQ/?coliid=I1KPDW6QTL3RAA
  
  Additionally, this would also be an backup/emergency cable I could keep in the car when travelling.
  
  I've been debating this back and forth, but now with my delivery imminent, I think it would be prudent to have it on hand.

Easy peasy.

Use a couple of these USB Extension cords. and wrap it all up in one of these wire management thingys. That's what I did. All nice and neat and the kids would yank cords out of consoles by tripping over them.

Do you have any white or light-colored trim in your house? Painting the fireplace a light neutral would really help it not feel so heavy. Ideally, I'd replace the mantle with a stained wood one that matches your floor or kitchen wood.

For cable management, we have this in black and like it.

For decorating the mantle, if you have some books to stand up on one side and something heavy to use as a bookend, that would be nice. And then on the other side, something tall or sculptural. Try taking the hanging pictures down for a week or two and let the wall breath.

Corduct will help with that tripping hazard. It is wife approved.

Nice setup.

Glad I can be of help. You mention a tripping hazard, a solution to that is a cable management like this one: https://www.amazon.com/dp/B0741PRVTQ/ref=cm_sw_r_cp_api_9.LMAbXA33Q26

There's one that I can't find at the moment that also screws into the floor and allows multiple outlets to pop out.

Yeah the batteries would be a great solutions, but with my experience with schools, they're much more likely to approve surge protectors and cable management over batteries.

This is not quite as heavy duty, but not as flimsy as the other option someone posted for under $9. I use this and it's great!
D-2 Rubber Duct Cord Cover - Length: 5FT - Color: Brown Cable Protector https://www.amazon.com/dp/B002C8IH9E/ref=cm_sw_r_cp_api_..pNzbKGGHD42

If they are looking at installing, then just go ahead and ask them if you can use it with that cover.

I used this. Link

I live in a rental home so I didn't want to drill into the basement. I have dark wood floors so it blends in pretty well. With the way the room is set up you don't really focus your attention down the hallway and so it goes mostly unnoticed. Works well for me so I thought I'd throw it out there.

I am also an individual that sometimes tapes cables to the floor almost everyday. If you work in a carpeted facility or are running cables over carpet, I would like to suggest to you this beauty: SafCord. It is wonderful.

https://www.amazon.com/SafCord-Carpet-Cord-Cover-Length/dp/B002CTBXQC

I've definitely done this more than I care to admit:
Electriduct D-2 Low Profile Rubber Duct Cord Cover Floor Cable Protector - 5 Feet - Black (Raw Rubber Material) https://www.amazon.com/dp/B00SA4SLKY/ref=cm_sw_r_cp_apa_i_dxTuDbEB6HJFR

I’d get something like this:

https://www.amazon.com/Durable-Cable-Ramp-Protective-Cover/dp/B010FH1YXE?ref_=fsclp_pl_dp_3

Put the cord across the sidewalk then this over top. Easy enough to get over for strollers and wheel chairs too.

Absolutely! It’s been working really good too. You can get the yellow covers on amazon cheap too

Anker PowerCore+ 26800 PD... https://www.amazon.com/dp/B010FH1YXE?ref=yo_pop_ma_swf

I used some leftover cable protector, which also works great (can't even see it underneath). This stuff: http://smile.amazon.com/gp/product/B0006VAWFG?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

Looks like a blast! One note, though, of something I noticed in both these pictures and the ones from the second event - it might be a good idea to get a cable cover for that power cable. Something like this:

https://www.amazon.com/Protector-Channels-Contains-Warehouse-Surroundings/dp/B07FNLMQQQ/

It would be shame for someone to either trip over that power cord, or catch it and yank something off the table.

Never heard or seen something like that before. So to prevent accidents and suicide you can't open the windows at all besides this little flap? How do you get fresh air back in?

I was talking about something like this btw:

https://www.amazon.com/Management-Baskiss-12x5x4-5-Organizer-Computer/dp/B07Q2SK4JQ/ref=mp_s_a_1_9?keywords=cable+box&qid=1575007985&sr=8-9

It's your place though, If you like it Like that leave it be

move it! or get one of those cable covering things to not trip. any home improvement store has them, or get it with no tax for the next few days lol

Rental? Run it on the floor across the opening, but put it inside a cord protector like this: https://www.amazon.com/Legrand-Wiremold-Corduct-Overfloor-Protector/dp/B000BVXVTA/ref=sr_1_2?ie=UTF8&qid=1518411671&sr=8-2&keywords=floor+cord+protector

When you pull up the carpet by the walls there should be a gap between the spike strip and the wainscot which is perfect for laying speaker cable and stabbing fingers. It's fairly simple to pull up the carpet and tuck it back into place behind you as you lay.

Two options for laying speaker wires over carpet:

1. Put a rug over it. The wire will end up pressed into a non-permanent groove in the carpet. The rug will tend to migrate slowly in the direction of the carpet weave.
   
2. Use Legrand Wiremold CDI-5 Corduct or similar. It seems larger large for just speaker wires, but it tends to stay in place and you can run over it with a vacuum cleaner without concern.

You ever tried SafCord. It's was better that those rubber cord covers and peels up without any mess. You do need carpet for it to work though.

D-Line Floor Cord Cover/Cable Protector - Light Duty CC-1 | Protect Cords and Prevent a Trip Hazard | 6 Foot Length | Cable Cavity 3/4" (W) x 3/8" (H) | Black https://www.amazon.com/dp/B0078NU4C6/ref=cm_sw_r_cp_apa_i_33ZRCbDDQQ7RN

We use these at our events.
We haven't had a broken cable yet... we put cables in these UNDER the protective mats

if you can't/won't fish it, cover it

it's a pretty little shelf. it adds style to the gadget. the job just needs to be finished, imo.

https://www.amazon.com/Wiremold-C30LG-Screen-Cover-White/dp/B000NO9G8A/ref=sr_1_6?ie=UTF8&qid=1469476829&sr=8-6&keywords=wiremold

This would make it look better. You might be able to find some smaller ones so you don't have to cut them. Paint it to match the wall for bonus points. Obviously not as nice as if you could run the cable through the wall, but it also doesn't involve gutting the wall.

Personally I'd just use a bunch of wire u-clips and put some spackle in the holes when I move out. It's a garage, that shouldn't be a big deal.

But if not, those command strips above are a good call.

And if you really don't want to attach anything to the ceiling, at least get one of these.

http://www.amazon.com/gp/product/B002CTA06Q

You're welcome.

Found this on amazon https://www.amazon.com/SafCord-Carpet-Cord-Cover-Length/dp/B002CTA06Q

But I'm not sure what kind of carpet we have lol

"The product only works on certain types of carpet; these types are Berber and Loop style carpets. THIS PRODUCT DOES NOT WORK ON CUT PILE CARPETS"

Sent them up to my manager anyway though :D Still trying to talk them into getting me some wireless DMX for our leikos, but they're going to have to wait till CapX

If you need to go over a sidewalk or driveway I recommend a outdoor cord cover

Something like this if it has to be on the floor?

https://www.amazon.com/SafCord-Carpet-Cord-Cover-Length/dp/B002CTBXQC

Instead of tape, get a cord cover something like this: https://www.amazon.com/Legrand-Wiremold-Corduct-Overfloor-Protector/dp/B000BVXVTA/ref=sr_1_5?keywords=cord+cover&qid=1558018774&s=gateway&sr=8-5

I'd use something cheaper like this:

https://www.amazon.com/gp/aw/d/B000BVXVTA/ref=mp_s_a_1_1?ie=UTF8&qid=1503464678&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=cord+cover+trip&dpPl=1&dpID=31rN5FHTGhL&ref=plSrch

Or at least tie a couple neon orange ribbons to it for visibility or wrap it in highly reflective tape.

If you change your mind.

Something like this. Paint it, put it up, donezo.

I totally understand, I picked up one of these raceways and it's still noticeable but hides it very well.

That's a 5 channel one.

There are cheaper options

https://www.amazon.com/Durable-Cable-Ramp-Protective-Cover/dp/B010FH1YXE/

Something like this?

You've got a few options:

• The "Proper" Way: install a power nap in the floor beneath the table.
  
  
• The "Clean" Way: Use anover-floor cord cover and route a cord to the nearest piece of furniture or wall then along the baseboard to an outlet.

wire cover They have more on Amazon...

Have you considered cord covers?

https://www.amazon.com/UT-Wire-UTW-CP501-BG-Protector-3-Channels/dp/B00170DC3E/

https://www.amazon.com/SafCord-Carpet-Cord-Cover-Length/dp/B002CTBXQC

Regarding the wiring, regardless of which camera or video cables I use, I will need to get them from the conference table to the wall. While it would be preferred to have them concealed completely, having our concrete floor cored will be expensive. For now, I plan to use this Floor Cord Cover. It's not elegant, but it will serve our needs for now. If it bugs me after we get the tech setup and working smoothly, I'll consider having the floor cored and have conduit run.

On the webcam, I may try first with a basic webcam for desktop use and see how it goes.

I was looking at this one it covers about 90% of it. But you will still be able to see just a tiny bit of blue coming out which will seriously bug my OCD. Are there any 5 or 10 inch ones that I can use to cover up the last few inches?

The cleanest install would be to saw cut the concrete and install wiring in conduit to a box mounted in the fresh concrete. When you are finished you will have an outlet flush with the floor and it's almost invisible. It's also the most expensive way to do this and will be messy during the construction phase.

You can use a flat extension: https://www.amazon.com/Profile-Electrical-Power-Extension-Cover/dp/B0013LQDPG/ref=asc_df_B0013LQDPG

Use a regular extension cord with a cover: https://www.amazon.com/Legrand-Wiremold-Corduct-Overfloor-Protector/dp/B000BVXVTA