Reddit mentions: The best furniture replacements parts
We found 48 Reddit comments discussing the best furniture replacements parts. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 34 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Regency Stiffener for 60" Table Tops
- Adds reinforcement to training tables, desks and more
- Mounts easily to the underside of virtually any surface with just a few screws
- Metal V-Channel construction
- Suitable for tables and desks measuring 60-Inch long
- Backed by a 5-year limited manufacturer's warranty
Features:
Specs:
Color | Metal |
Height | 1 Inches |
Length | 46 Inches |
Weight | 2 Pounds |
Width | 2 Inches |
Number of items | 1 |
2. Hospitality Bed No Sag Mattress Slats - Center Support - Universal Size Adjusts from Full to Cal King
- Fully Adjustable to accommodate a variety of bed frame sizes including Full, Queen & King
- Takes place of wooden cleat, the leg can go down to 4" for use on bed that is 4" from the floor to the foundation
- Amazing Height Adjustment from 4 inches up to 15 inches
- Strong Support for Thick Mattresses, protects your side rails from bowing or bending
- Can hold over 2,000 lbs; LIFETIME Service Policy
Features:
Specs:
Height | 11 Inches |
Length | 54 Inches |
Weight | 24 Pounds |
Width | 3 Inches |
3. Glideaway X-Support Bed Frame Support System, GS-3 XS Model - 3 Cross Rails and 3 Legs - Strong Center Support Base for Full, Queen and King Mattress, Box Springs, and Bed Foundations
- STRONG SUPPORT FOR BEDS: Patented X-System keeps bed frame legs vertical and in place, preventing them from sliding out of position. All-steel cross rails combined with heavy-duty super clamp and X Support provide the ultimate in support for your bed, foundation, and bedding. Stronger alternative to bed slats. No more sagging mattress!
- UNIVERSAL FIT: Suitable for Full / Double, Queen, King / Eastern King, and California King size Beds. Works with Mattresses, Box Springs, and Foundations. Compatible with steel, iron, metal, and wood bed frames (bed frame not included).
- EASY TO USE: Clear, uncomplicated instructions are included. Pre-drilled holes allow you to easily secure the cross slats to your bed using the included screws.
- ADJUSTABLE HEIGHTS: Easily adjusts for bed heights as low as 6 inches up to 15-1/2"tall. For use with headboards (Not Included), footboards (Not Included) and side rails with lip (Not Included).
- FAMILY OWNED IN THE USA: Glideaway is a family-owned company that has been dedicated to providing value-based and innovative sleep products to their customers for over 50 years.
Features:
Specs:
Color | Black |
Height | 0 Inches |
Length | 0 Inches |
Width | 0 Inches |
Size | Queen |
4. #711 Bolt-On to Hook-On Bed Frame Conversion Brackets with Hardware, Set of 2
- Converts a bolt-on bed frame to allow for a hook-on type headboard.
- Allows easy conversion from bolt-on to hook-on brackets.
- This product is sold in pairs. To attach your headboard AND footboard, you would need two pairs.
- Product received may differ in color, for example you may receive silver brackets
Features:
Specs:
Color | Clear |
Height | 4.02 Inches |
Length | 2.99 Inches |
Width | 0.98 Inches |
5. Sagging Sofa Cushion Support | Seat Saver
- Helps make sofas sit up straight again
- Slip under seat cushion to give old sofas a new look
- Will improve your posture as you sit
- Just unfold and put into place
- Top quality vinyl-covered particle board; 19 x 66 inches
Features:
Specs:
Color | Black |
Height | 0.004 Inches |
Length | 66 Inches |
Weight | 6.65 Pounds |
Width | 19 Inches |
Size | 1 Count (Pack of 1) |
Number of items | 1 |
6. Bed Claw Headboard/Footboard Attachment Brackets for Restmore Bed Frames, Set of 2
- Brackets are durable, steel brackets
- These brackets are specifically designed for use with Restmore bed frames
- If you do not have a Restmore frame with the Key Slot connections, Bed Claw also offers traditional bolt-on headboard attachment brackets
- Included with the set of 2 brackets are 2 bolts and 2 lock nuts to prevent the brackets from moving once they are installed on the Restmore bed frame.
- LIFETIME SERVICE POLICY
Features:
Specs:
Height | 2.5 Inches |
Length | 5.9 Inches |
Weight | 2 Pounds |
Width | 4 Inches |
7. FOLAI Recliner Replacement Parts - Universal Black Metal Pull Recliner Handle with Cable - fits Ashley and Major Recliner Brands Couch Style Pull Chair Release Handle for Sofa
- This product is suitable for most of the furniture brands, but not all the brands. Purchased customer feedback such as Raymour & Flannigan, Rooms Go, Conns's, Wickes, Bobs store, Bassett, etc.
- Handle Size: 4-1/2" x 2-5/8"
- Total Cable Length Excluding Handle and Z Tip: 35"
- Exposed Cable Length (Length from Plastic Plug to end of Z Tip): ~5.5"
- To get the Correct Size, Read Below Section "Getting the Size You Need"
Features:
Specs:
Color | Metal Handle With Cable |
Size | 1pcs handle with 35 inch cable |
Number of items | 1 |
8. EEO Lift Chair or Power Recliner AC/DC Switching Power Supply Transformer
- World Wide Input Voltage 100-240VAC 50/60Hz, Output 29V , 2A
- DC output use 2 Pin ( Flat and Round ) to Motor Connection End
- Compatible with okin, limoss, pride,golden,lazboy lift chair or recliner motors
Features:
Specs:
Color | Black |
9. Ergonomic Sleep C Shape Soft Tencel Maternity, Pregnancy, Nursing Pillow Body and Pain Relief Pillow with Case
Germany Origin Foam Raw Material - NOTE: Our products are SOLD By AMAZON.COM and Memory Foam Pillow Expert ONLY, any goods from OTHER SELLERS guarantee NOT GENUINEAdjustable Gel Bean Premium Shredded Visco Elastic Memory Foam Prevents you from tossing and turning at night by contouring your entire b...
10. 3-5/8" Tall Replacement Bed Frame Glide Feet, Cone Shaped, Set of 4
- Replacement plastic feet for bed frames, common cone shaped style. Packaged as a set of 4 glides.
- Glides are ideal for use on hardwood and tile flooring, can also be used on carpeting or rugs.
- The complete or overall height of this glide is 3-5/8". However, the top 7/8" of this glide will insert into your bedframe. This leaves 2-13/16" of the glide actually contributing to the height of your bedframe.
- These can only be used with frames which have hollow round legs. Please check the dimensions in the images. If you are replacing wheels or casters, you may need a Steel Stem glide.
- Base is approximately 2-1/2" in width.
Features:
Specs:
Height | 2.5 Inches |
Length | 6.2 Inches |
Weight | 6 ounces |
Width | 4.1 Inches |
11. IKOCO Power Recliner Transformer AC/DC Switching Power Supply Transformer with AC Power Wall Cord for for Lift Chair or Power Recliner
- Package Includes: 1 PCS power adapter + 4 feet power cord. With updated magnet ring, the lift chair transformer adapter has longer life and no radiation.
- Specifications: Input: AC 100-240V, 1.5-2.0A 50/60Hz. Output: DC 29V/24V 2.0A. Volt and current adjust automatically. If the plug of transformer could fit with your recliner socket, then the power adapter works well.
- Compatible with Brand Models: ZBHWX-A290020-A, ZB-A290020-A, HXY-270V2220A, ZB-A290018-A, ZB-B290020-B, W52RA73-290018, KDDY001B, KDDY008. If the connection (flat & round) is same with your recliner, then the power adapter works well.
- Compatible with Most Brands: Power recliner transformer fully compatible with most recliners and sofas, such as OKIN, Limoss, ashley and Tranquil Ease Lift Chair, Cheers electric sofa and Power Recline DeltaDrive and BetaDrive Motors with a two pin (flat & round) connector.
- Warranty Guarantee: Lifetime replacement warranty for your purchase. If you have any problem with product, please feel free to contact us, we will respond in 24 hours.
Features:
Specs:
Color | black |
Height | 1.37 Inches |
Length | 4.53 Inches |
Weight | 0.74516244556 Pounds |
Width | 2.16 Inches |
Number of items | 2 |
12. 42" X 72" Rectangle Tempered Glass Table Top 1/2" Thick 1" Beveled Edge
Finest furniture quality tempered glassBrilliant edge workExpertly packaged to ensure safe deliveryRubber bump-ons included for installation
Specs:
Color | Clear |
13. 1/4-20 Furniture Levelers Adjustable Black Glides (4)
Specs:
Color | Black |
Height | 1 Inches |
Length | 3 Inches |
Width | 3 Inches |
14. IKEA Cam Lock Screw #118331 (12 Pack)
Cam-Lock Screws (IKEA Part #118331)12 pack
15. Recliner Power Supply(Universal Version Compatible with All Recliner), Ponkor AC/DC Switching Power Supply Transformer 29V 2A Adapter for Lift Chair or Power Recliner Limoss OKIN
- COMPATIBLE WITH : Switching power supply transformer fully Compatible with OKIN, Limoss and Tranquil Ease Lift Chair,Cheers electric sofa and Power Recline DeltaDrive and BetaDrive Motors with a two pin (flat & round) connection to the 2,motor.
- COMPATIBLE MODEL: Power recliner transformer compatible with Part Numbers: ZBHWX-A290020A,W52RA73-290018, HXY-270V2220A, KDDY001, KDDY008, ZB A290020-B
- PARAMETER: Input: AC 100-240V,1.5-2.0A 50/60Hz. Output :DC 29V 2.0A.
- NOTICE: Power cord is included. Update the Magnet Ring.
Features:
Specs:
Color | Recliner Power Supply |
Height | 1.5 Inches |
Length | 4.3 Inches |
Weight | 0.74516244556 Pounds |
Width | 2.3 Inches |
16. Sleep Master Bed Skirt and Headboard / Footboard Bracket / Set of 4, Twin XL
Steel construction provides strong bracket support and durabilityMultiple slots allow for adjustable sizingSet includes 4 headboard/footboard brackets and a white bed skirt for use with the Sleep Master By Zinus platform metal bed frame/mattress foundation
Specs:
Color | Black |
Height | 11.8 Inches |
Length | 6.1 Inches |
Weight | 7 Pounds |
Width | 6.1 Inches |
Size | Twin X-Large |
17. Mudder Furniture Felt Pads Self Stick Heavy Duty Chair Floor Protector (Set of 132)
- *001.003 Style) Shell: Polyester 100%, Lining: Polyester 100% / Very Thin and Lightweight Bomber Style Jacket (0.65lbs) / 6ft 150lbs suitably fits 001Medium, 003Large Size
- *002 Style) Shell: Polyester 80%, Lining: Nylon 20%/ Medium Thick and Filled with Cotton(1.5lbs) / 6ft 165lbs suitably fits One Size
- Snap Button Side Pockets, Zip-Up Front, Zipped Pocket with Pen Slots On Sleeve
- Hand Wash Recommended, Do Not Bleach/Tumble Dry/Iron
- Designed and Produced by Professional Manufacturer
Features:
18. Furniture Lifter - Furniture Mover - 25" Tall
Lifts up to 280 lbsCan be used while standing; so it's perfect for people with back, hip or knee problems.Heavy-duty design - 25" TallAids in cleaning and rearrangingFurniture skids sold separate
Specs:
Color | Black |
Height | 2 Inches |
Length | 31 Inches |
Weight | 1.94 Pounds |
Width | 9.5 Inches |
19. Furniture Fix - Set of 6 - Support for Sagging Chair
- NO MORE SAGGING: After prolonged usage, your love seats, sofas, mattresses, and other furniture will start to lose their lift and support over time. Furniture Fix easily fits beneath most couch and mattress cushions to revitalize, add support and remove that ugly and uncomfortable sag.
- EASY ASSEMBLY: Furniture Fix is a fast and easy solution to any sagging piece of furniture. Its simple design allows you to put new support back into your piece of furniture within minutes. Just insert and slide the interlocking pieces into the corresponding sides and you’re ready to fix that eye sore of a sag. Each panel measures 19 x 4.5 x .5 inches.
- CUSTOMIZABLE FIT: This set of 6 love seat and sofa support boards can be customized to lift and fix your couches. Use all 6 panels furniture or all 6 for a chair.
- MONEY SAVER: Once a couch or mattress loses its lift and support, most people would toss the whole thing away and buy a new one. Furniture Fix knows that many people don’t have the time or money to replace their furniture. With Furniture Fix, you can easily bring new life to your sofa or mattress without burning a hole in your pocket. Why buy something new when you can just restore the old to new.
Features:
Specs:
Color | White |
Height | 19.1 Inches |
Length | 1.6 Inches |
Weight | 1.5 Pounds |
Width | 5.8 Inches |
Size | Set of 6 |
Number of items | 6 |
20. 8" Wood Sofa/Couch/Chair/Ottoman Espresso Finish Furniture Legs - Set of 4
Specs:
Color | Espresso |
Height | 4 Inches |
Length | 12 Inches |
Width | 12 Inches |
🎓 Reddit experts on furniture replacements parts
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where furniture replacements parts are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I don't know if you're going to get anything super high quality, but these are some I'd probably go for if I were in your situation. They're at several different price points:
​
$830
$1235
$1616
$1636
​
I think the 1616 is very good looking and might hold up better than some of the others. The 1636 actually has drawers in the bed frame making it possibly the best value out of these sets. I think whatever you do you should consider getting a center support for your bed. The one I've linked has 3 crossbars. I'd buy 2 packs of these to support either your box spring or bunkie board. You'll need one or the other. Let me know what you think of the ones I've picked out or if you'd like any more info on bed stuff.
Are you open to vintage?
Most American and Canadian manufacturers in the mid-century era made tall as well as wide dressers. In the USA, you can choose what best fits your preferred look: Heywood-Wakefield made a number of modern lines including Encore (the biggest seller), Sculptura, Koh-i-Noor (my favorite; these are the big three blond-furniture lines), Fascination, Prophecy, Cadence, Cliff House, Danish Modern and Contessa. Kent Coffey made many styles including Perspecta. Broyhill is notable for their Brasilia and Sculptra lines.
There are so many choices, it's hard to put them all here. There's lots to research to find your preferred style.
The long-and-low look came over from Europe to the US with Danish Modern furniture, as I think most European customers preferred a freestanding wardrobe over a tall dresser.
Many old bedframes just need some tigtening of the hardware at the corners, and then put in a good mattress support system, something like this:
https://www.amazon.com/Glideaway-X-Support-Support-System-XS/dp/B004OT0S2I/ref=asc_df_B004OT0S2I/?tag=hyprod-20&linkCode=df0&hvadid=191927055053&hvpos=1o2&hvnetw=g&hvrand=12690765935161218701&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1018127&hvtargid=pla-366091252957&psc=1
Unfortunately, queen and king size beds were only invented at the end of the 1950s, and didn't become common until much later, so most of the vintage lines' largest bedframe size is a full.
I don't need double talk, I need this Sad but true story, Every night when i go to bed its not in a bed but on a couch. Long story short, I had a bed but when i moved it was an item that wasn't able to come with me. So after sleeping on the couch, it has began to droop, sink, break whatever you want to call it and these would help support me a bit. and i think /u/chrisrey89 needs this my reasoning? what would happen if /u/chrisrey89 were to fall down a cliff and break both legs, its dark, lonely, cold, no one for miles and miles! if only 911 could be called! wait what about his phone? he pulls it out of his pocket and what do you know his phone is smashed to bits. do you want to live forever with the knowledge that you could have bought him the phone case that saved his life. i could never live that down but if your cool with living with that guilt by all means move on to the next post. however if you want to be a hero, its all up to you!
Have you thought of a mattress support in the middle? Gets rid of sagging for a better sleep. Check out this on Amazon - which really helps your mattress, it could increase the life of your current mattress and is inexpensive. Kind of gives it more support and health - reduces sagging.
You can get a pretty basic frame and then screw that into the headboard. You could also build a frame to go into those slots. Either is fairly straightforward but the first option may mean screwing up the second option long-term.
Or you could do what a friend of mine die and fasten the headboard to the wall using drywall anchors and then just push the bed up to that.
Edit: The first option looks like this. You can also get an adaptor to convert from one to the other, which was news to me when I searched. That'd probably be your best bet.
Nice setup, wish i could use that case but roommates are too much of a hazard to go open frame.
Not sure if its the photo or not but looks like your desk is bowing a little, with a span like that you might want to add a center support leg or grab a table stiffener.
Yep, this is the easiest and affordable solution. There are commercial versions available too but regular plywood cut to size is usually the best.
This is one of the commercially available types: https://www.amazon.ca/Unknown-Sagging-Chair-Support/dp/B00024JOVA
To be clear, one Alex Supporting Two Linnmons? Probably fine... Depends on which size Linnmon you choose and your equipment. Longest I have is 47" and it is pretty sturdy for the amount of weight I put on it, but I wouldn't want to sit on it or anything...
Worst case scenario add a third leg to each Linnmon next to the Alex, to prevent slipping and add additional support. Probably unnecessary, and can be added later if you notice a problem.
Someone else mentioned this, if you need more support
Good luck!
Use these and attach it to the outside of your frame like this. It looks like your cuts are perfectly set up for that situation.
I bought this for mine, it fit perfectly. www.amazon.com/dp/B01KXIUX2S/ref=cm_sw_r_cp_tai_QEzwDbAEKWF45
Dude, or Dudet, thank you! This is exactly the ELI5 response I needed!
Much appreciated -- now let me show you the type of connector the power supply needs to have in order for the male piece on the couch to fit/work (not sure if there are polarity issues with this style connector?): https://www.amazon.com/Chair-Recliner-Switching-Supply-Transformer/dp/B00OBV3OWU/ref=sr_1_1?ie=UTF8&qid=1498236066&sr=8-1&keywords=eeo+lift+chair+or+power+recliner+ac+dc+switching+power+supply
Second image down, the wire on the left. The female two prongs on the power supply itself match the wire I have going to the wall. The last step is being sure the connector on the wire coming from the power supply doesn't have polarity differences, but if it does determining what they are and how to match them. Make sense?
I got this one: Ergonomic Sleep C Shape Soft Tencel Maternity, Pregnancy, Nursing Pillow Body and Pain Relief Pillow with Case https://www.amazon.com/dp/B01KLJQSQ4/ref=cm_sw_r_cp_apap_eROS92BzRtXtW
I really really love it. It's filled with bits of foam so it conforms to the body in exactly the right way. Plus it's only $40.
yea, matttress without boxspring might have a tendency to sag in places that are unsupported [depending on mattress construction], plywood is one option but might run the same risk of accumulating moisture, another avenue might be to get some plywood and cut into strips to use as slats (and if that is not sturdy enough you could afix additional feet to those supporting slats
http://www.amazon.com/Tall-Replacement-Frame-Glide-Shaped/dp/B00J3Z15T8
or
http://www.amazon.com/dp/B004W36V6I/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=1944687582&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00J3Z15T8&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=19NN5NF585SD2SFNBPZG
may work
another commentor also mentioned that dessicants could be used between the mattress and the floor/support if you are in a highly humid environment.
its always important to take care of the things between you and the ground!
This is the correct take. Usually, any particle board over 60" will have problems with warping, especially with how much stuff people are putting on their desk tops. One way you can remedy this is to buy a table top stiffener or two and screw them into the bottom of the top, or buy a base that has built in supports running the length of the underside of the table.
I’ve purchased these generic versions for two different chairs my parents had after their puppy chewed the old ones. They work great years later.
IKOCO Lift Chair Power Recliner AC/DC Switching Power Supply Transformer + Power Cord … https://www.amazon.com/dp/B01AXG9TQ6/ref=cm_sw_r_sms_c_api_aWROBb3B717Y7
You need what's called a "stretcher" or "stiffener."
Take the top piece off.
Place it on the ground, upside-down, and put a book or something under either end and put some weight in the middle, like your knee or something (but not enough so that it breaks. You just want it to flatten out, or bend just a little bit the other way). Then screw in the stiffener.
Thats exactly what I was thinking, but there’s no way I would pay lmao
I found some glass that might be the same dimensions or bigger for $300 at amazon
It is a custom part. Contact the bed maker.
Can you replace it with an adjustable glide?
Or, as pizzasteak said, modify a square u-bolt to fit.
It's something like this
You could also just screw a couple of table stiffeners under it. It won't be visible, won't bump your legs into it, and much easier than mounting something from the wall to your desk.
Ok so cam Lock screws for furniture. Before buying you need to look at the headboard. These screw on one side. If that’s stripped you might want to do something else. Yes IKEA has them. IKEA Cam Lock Screw #118331 (12 Pack) https://www.amazon.com/dp/B07QYB3P9Y/ref=cm_sw_r_cp_api_i_5ioXDbS32XGZ5 you must confirm size
Ponkor Recliner Power Supply(Universal Version Compatible with All Recliner), AC/DC Switching Power Supply Transformer 29V 2A Adapter for Lift Chair or Power Recliner Limoss OKIN https://www.amazon.com/dp/B0714BYMGC/ref=cm_sw_r_cp_api_i_V3iFDbXG1D6XC
You can also get a battery that connects to it as well.
strut as in a structure support bolted under the countertop.
Can use something like this https://www.amazon.com/Regency-Stiffener-60-Table-Tops/dp/B01DOZDUEK.
I however used this since i had a old one lying around, just sanded it and repainted it to brown. drilled two holes at the end and bolted them to the underside of the Karlby. Length between the drawers is around 110cm.
https://www.amazon.com/Kapro-779-40-60-Spirit-Quality-24-Inch/dp/B00BQI00DW/ref=sr_1_99?crid=2ER6IGZONSLN6&keywords=level+tool&qid=1566402762&s=gateway&sprefix=levell%2Caps%2C315&sr=8-99
https://www.amazon.com//dp/B0142WK9SY
then you can add any headboard you like,
but i would confirm all this with zinus cs.
Agreed... I’ve never seen one of those. Found a similar one on Amazon for $90
https://www.amazon.com/Furniture-Lifter-Mover-25-Tall/dp/B004WLPNUK/ref=mp_s_a_1_6?ie=UTF8&qid=1542735923&sr=8-6&pi=AC_SX236_SY340_QL65&keywords=furniture+jack&dpPl=1&dpID=31bzgPSiuGL&ref=plSrch
I have a very similar mid century executive desk. I ordered these and haven't regretted it for a moment.
https://www.amazon.com/gp/aw/d/B01393H19M/ref=mp_s_a_1_41?ie=UTF8&qid=1469493273&sr=8-41&pi=AC_SX236_SY340_QL65&keywords=furniture+legs
a furniture lifter
You know what's disturbing, someone already makes a problem to fix this
Though for that price I doubt it works