Reddit mentions: The best garage storage & organization products
We found 668 Reddit comments discussing the best garage storage & organization products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 203 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Delta Michelangelo Two-Bike Gravity Stand
- Space Saving Indoor Bike Storage: Featuring An Innovative Low-Impact Stand Design, The Michelangelo 2 Bike Rack Garage Simply Leans Against The Wall And Uses Gravity To Secure Up To 2 Bicycles
- Hassle-Free Assembly : The Michelangelo Garage Bike Rack Takes Minimal Effort And Expertise To Install, All You Need Is A Screwdriver. Assembly Hardware And A Wall Strap Is Included To Create A Secure Wall Bike Rack In Minutes
- Fully Adjustable Bicycle Storage : Arms Accommodate Any Bike Size Or Style, Up To 40Lbs. Support Arms Are Repositioned With A Simple Twist, No Tools Needed, Which Means This Rack Is Easy To Adjust Once Assembled
- Quality Steel Construction : This Large Capacity Vertical Bike Rack Securely Holds Up To 2 Bikes And A Total Weight Of 80 Lbs. Durable Rubber Feet Keep This Standing Bike Rack Securely In Place While Protecting Your Floors
Features:
Specs:
Color | Silver |
Height | 16.535433054 Inches |
Length | 83.464566844 Inches |
Number of items | 1 |
Release date | August 2012 |
Size | 86" x 23.5" x 13.75" |
Weight | 0.25 Pounds |
Width | 21.259842498 Inches |
2. Racor - PLB-2R, Bike Rack, Garage Wall Stand
- Customizable - Gravity rack leans against any walll, lightweight and movable
- Durable - Vinyl coated steel and rubber skids protects bikes, floors and walls
- Adjustable - Independent adjustable holding arms will work with men's and women's bikes
- Convenient - Bikes are organized but easily accessible
- Reclaim Your Garage - Reduce your bike's footprint in your garage, but keep them easily accessible
Features:
Specs:
Color | Black |
Height | 7.3 Inches |
Length | 33.3 Inches |
Number of items | 1 |
Size | 2 Bikes |
Weight | 20.3 Pounds |
Width | 15.5 Inches |
3. AmazonBasics 3-Shelf Adjustable, Heavy Duty Storage Shelving Unit (250 lbs loading capacity per shelf), Steel Organizer Wire Rack, Chrome (23.3L x 13.4W x 30H)
- 3-shelf shelving unit for your kitchen, office, garage, and more
- Each shelf holds up to 250 pounds (evenly distributed); total max load weight is 750 pounds
- Wire shelves adjustable in 1-inch increments; no tools required
- Durable steel construction with chrome finish; adjustable leveling feet
- Product Dimensions: 23.2 x 13.4 x 30 inches (LxWxH)
Features:
Specs:
Color | Chrome |
Height | 30 Inches |
Length | 23.2 Inches |
Number of items | 1 |
Weight | 9.17 Pounds |
Width | 13.4 Inches |
4. Racor - PBH-1R, Bike Storage, Garage Pulley Lift
Easy Lifting - Pulley system reduces weight by 8 timesSafe - Pulley locking mechanism keeps bike secure until releasedCord Storage - Wall mounted cord wrap keeps cords tidyAdjustable - For use on ceilings up to 12 feet highReclaim Your Garage - Each lift can free 6-8 ft of floor space keeping your o...
Specs:
Color | Black |
Height | 5.5 Inches |
Length | 12 Inches |
Number of items | 1 |
Size | 1 Pack |
Weight | 2.9 Pounds |
Width | 5 Inches |
5. Bike Nook Bicycle Stand, Portable and Stationary Space-Saving Rack with Adjustable Height, for Indoor Bike Storage
- EASY TO USE UPRIGHT DESIGN - means no more struggling to lift and hang heavy bikes to make room in your houses.
- PREVENTS BIKES FROM DAMAGING - no more scratches or damage to walls, ceilings, cars & more
- LETS YOU KEEP YOUR BIKE INSIDE - protects your bike from weather and damage
- ADJUSTS TO VARIOUS HEIGHTS - for bikes with a 18 inch wheel size or bigger. It requires no drilling! It’s easy to assemble, completely portable, and fully adjustable. Bike Nook is the easiest repair rack for fixing or installing any accessories necessary to improve your cycling experience
- SPACE-SAVING HANDSTAND POSITION - frees 3.5 feet of floor space
Features:
Specs:
Color | Black |
Height | 30 Inches |
Length | 15 Inches |
Number of items | 1 |
Release date | April 2017 |
Size | Large |
Weight | 4 Pounds |
Width | 22 Inches |
6. AmazonBasics 5-Shelf Adjustable, Heavy Duty Storage Shelving Unit (350 lbs loading capacity per shelf), Steel Organizer Wire Rack, Black,(36L x 14W x 72H)
- 5-shelf shelving unit for your kitchen, office, garage, and more
- Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1750 pounds
- Wire shelves adjustable in 1-inch increments; no tools required
- Durable steel construction with black-coated chrome finish; adjustable leveling feet
- Product Dimensions: 36 x 14 x 72 inches (LxWxH)
Features:
Specs:
Color | Black |
Height | 36 Inches |
Length | 72 Inches |
Weight | 29.98 Pounds |
Width | 14 Inches |
7. ClosetMaid 3456 Large Shelf, White
- Stack extra tiers of dishes, canned goods or containers in kitchen cabinets with this versatile shelf
- Maximizes counter or cabinet space
- Measures 5.7" H x 16.3" W x 8.4" D
- Material: Epoxy coated steel
- No assembly required
Features:
Specs:
Color | White |
Height | 5.675 Inches |
Length | 16.25 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.427 Pounds |
Width | 8.375 Inches |
8. Rubbermaid FastTrack Hose Hook
- The product is Hose Hook
- Easy to use
- The product is manufactured in China
Features:
Specs:
Color | Black |
Height | 6.01 Inches |
Length | 5.75 Inches |
Number of items | 1 |
Release date | May 2022 |
Size | Individual |
Weight | 1 Pounds |
Width | 9.38 Inches |
9. Feedback Sports RAKK Bicycle Storage Stand
- Ideal bicycle storage space for apartments, garages, basements, sheds or retail bike shop
- Versatile design allows for bike parking with front or rear wheel without risk of scratching rims or spokes
- Storage system fits most any road bike, cyclocross bike, mountain bike, or electric bikes
- Wheel slot accommodates 20mm road tires up to 2.3″ mountain bike tires
- Innovative design folds to a compact unit when not in use
- Spring-loaded design is hands-free – simply roll the bike into the wheel slot and the swing arm holds securely
- Modular attachments create 12″, 13.5″ or 15″ (30.5, 34.3, or 38.1cm) spacing and arranged in countless configurations
- Durable powder coated steel maintains a long-term clean finish
- Provides an awesome bike parking solution for even the heaviest of bikes - 50lb max load
- Available in RAKK XL for 2.5″ – 5″ tires
Features:
Specs:
Color | Black |
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Release date | April 2012 |
Size | One Size |
Weight | 5.95 Pounds |
Width | 0 Inches |
10. Swagman HANG IT Adjustable 2 Bike Storage System
EASY TO ASSEMBLE: The HANG IT storage system only takes a few minutes to install following the instructions. The floor and ceiling protective pads can pivot to adapt to uneven surfacesDURABLE: This simple, sturdy indoor bike storage system is made with solid construction so you can take comfort know...
Specs:
Color | Unset |
Height | 60 Inches |
Length | 4.5 Inches |
Number of items | 1 |
Size | One Size |
Weight | 1 Pounds |
Width | 7 Inches |
11. Racor - PHL-1R, Garage Ceiling Storage Rack Lift
- Adjustable - Mounts to any ceiling, adjust to angle ceilings with the built in nylon rings
- Durable - High strength steel allows you to lift up to 250 pounds
- Efficient - Raises and lowers by crank and includes all installation accessories
- Reliable - Steel cables allow for 8ft of vertical lift and securely locks into place
- Reclaim Your Garage - 16 sq feet of additional overhead storage space with the 4 ft X 4 ft design, making more room for the things you want to do
Features:
Specs:
Color | Black |
Height | 7 Inches |
Length | 51 Inches |
Size | Pack of 1 |
Weight | 47.95 Pounds |
Width | 20 Inches |
12. AmazonBasics 3-Shelf Adjustable, Heavy Duty Storage Shelving Unit (250 lbs loading capacity per shelf), Steel Organizer Wire Rack, Black (23.3L x 13.4W x 30H)
- 3-shelf shelving unit for your kitchen, office, garage, and more
- Each shelf holds up to 250 pounds (evenly distributed); total max load weight is 750 pounds
- Wire shelves adjustable in 1-inch increments; no tools required
- Durable steel construction with black-coated chrome finish; adjustable leveling feet
- Product Dimensions: 23.2 x 13.4 x 30 inches (LxWxH)
Features:
Specs:
Color | Black |
Height | 30 Inches |
Length | 23.2 Inches |
Number of items | 1 |
Weight | 9.17 Pounds |
Width | 13.4 Inches |
13. RAD Cycle Woody Bike Stand Bicycle Rack Storage or Display Holds Two Bicycles and is Constructed of Stylish Hard Wood
- ►REAL WOOD - Made of furniture grade solid hardwood hand selected for both its beauty and it's strength. Stylish and functional
- ►NO WORRIES - Solid wood top plate uses protects the ceiling from damage, yet holds the Woody bike rack solidly in place.
- ►HEAVY DUTY - The Woody Bike Rack has a storage capacity of up to 200 lbs. and still looks like a decorative piece in your home or garage
- ►DIMENSIONS - Assembled dimensions are: 7-10'L x 14.5"W x 9.5"D. will span from floor to ceilings 7' to 10'
- ►EASY ON BIKES - Vinyl coated arms securely support the bikes while protecting the paint from damage.
Features:
Specs:
Color | Brown |
Height | 3 Inches |
Length | 75 Inches |
Number of items | 1 |
Release date | July 2018 |
Weight | 13.18 pounds |
Width | 8 Inches |
14. AmazonBasics 3-Shelf Heavy Duty Shelving Storage Unit on 2" Wheel Casters, Metal Organizer Wire Rack, Chrome (23.2L x 13.4W x 32.75H)
- Shelving unit offers handy storage space and easy access to tools and supplies; ideal for a kitchen, office, or garage
- Includes a storage rack with 3 adjustable-height shelves, 4 leveling feet, and 4 caster wheels
- Made of heavy duty steel wire with a chrome finish
- Quick easy setup with no tools needed
- Shelf height is adjustable in 1-inch increments
- Weight capacity per shelf: 250 pounds with leveling feet, 73 pounds with wheels not in motion, and 50 pounds with wheels in motion
- Weight capacity overall: 750 pounds with leveling feet, 220 pounds with wheels not in motion, and 150 pounds with wheels in motion
- Note: weight capacities are based on evenly distributed weight
Features:
Specs:
Color | Chrome |
Height | 32.75 Inches |
Length | 23.2 Inches |
Number of items | 1 |
Size | 3-Shelf |
Weight | 9.39 Pounds |
Width | 13.4 Inches |
15. YYST Clear Light saber Wall Mount Wall Rack Wall Holder - Hardware Included.
- Patented Product for keeping lightsaber vertically displayed.Quantity : One clear blade holder , one wall mount clip. Hardware included.
- Clear - Both the blade holder and the wall mount clip are clear. Does its job without being visually obtrusive. Before installing , Please peel off the white film of the acrylic , which protects the acrylic from scratches. Then you will see very clear acrylic.
- Easy to take in and take out - Put your light saber into the blade holder and push the tip into the wall mount clip.
- Light Saber not included. 5 Pounds - the blade holder is very thick, which withstands up to 5 Pounds.
- Screw Covers included - the screw covers are provided to hide your screws.
Features:
Specs:
Color | Clear |
Size | X |
Weight | 10 Pounds |
16. Hangman Anti-Tip Kit - 400 Pound Falling Furniture Prevention Device (TK-400), 1 Pack
- Holds up to 400lbs.
- Helps prevent injury for children and adults
- Helps prevent furniture, filing cabinets, and full length mirrors from falling over.
- Tamper resistant
- Made of high grade galvanized aircraft steel cable and steel components
Features:
Specs:
Color | Aluminum |
Height | 1.25 Inches |
Length | 5.6 Inches |
Number of items | 1 |
Size | 1 Pack |
Weight | 0.1 Pounds |
Width | 3.62 Inches |
17. Edsal URWM184872BK Black Steel Storage Rack, 5 Adjustable Shelves, 4000 lb. Capacity, 72" Height x 48" Width x 18" Depth
- Storage rack with 5 adjustable shelves and a 4,000 lb. capacity is suitable for organizing and storing items; Shelf Weight Capacity: 800 Pounds
- Shelves are made of particle board supported by double-riveted beams and braces, and adjust in 1-1/2" increments to accommodate items of varying heights
- Frame is made of steel for strength, frame has smooth black finish for resistance to corrosion
- Rivet lock design for assembly without nuts or bolts, instructions included, tools for assembly sold separately
- Two-piece post design allows assembly as a single 72" high unit or two 36" high units; Center shelf connects top and bottom posts for stacked setup
- What's Included? 8 posts, 10 braces, 10 beams, 5 shelves; Post couplers NOT INCLUDED
Features:
Specs:
Color | Black/Sand |
Height | 72.04724402 Inches |
Length | 48.03149601 Inches |
Number of items | 1 |
Size | 72" Height x 48" Width x 18" Depth |
Width | 18.1102362 Inches |
18. AmazonBasics 5-Shelf Adjustable, Heavy Duty Storage Shelving Unit (350 lbs loading capacity per shelf), Steel Organizer Wire Rack, Chrome, (36L x 14W x 72H)
5 shelf shelving unit for your kitchen, office, garage, and moreEach shelf holds up to 350 pounds (evenly distributed); total max load weight is 1750 poundsWire shelves adjustable in 1 inch increments; no tools requiredDurable steel construction with chrome finish; adjustable leveling feetProduct Di...
Specs:
Color | Chrome |
Height | 36 Inches |
Length | 72 Inches |
Weight | 29.98 Pounds |
Width | 14 Inches |
19. AmazonBasics 4 Cube Grid Wire Storage Shelves, Black
- 4-pack of interlocking wire storage cubes for neat cubby storage and tidy display
- Includes 20 plastic corner connectors and 16 grid panels made of powder-coated steel wire; no tools required for set-up
- Modular design allows for multiple stacking options; 10-pound weight capacity per cube; 40-pound weight capacity total
- Set weighs 11.28 pounds; solid black color easily coordinates with surrounding décor
- Dimensions: Each cube measures 14 x 14 x 14 inches; stack vertically, side-by-side or horizontally
Features:
Specs:
Color | Black |
Height | 14 Inches |
Length | 14 Inches |
Number of items | 1 |
Size | 4 Cube |
Weight | 11.28 Pounds |
Width | 14 Inches |
20. Greenpro 3309 Wall Mount Hardware and Craft Storage Cabinet Drawer Organizer
Made of durable polystyrene strong frame with non-breakable translucent drawers!.Perfect for storing hardware, crafts, sewing supplies etc. within hands reach.Can be wall mounted, includes necessary hardware, or can be stacked on a table.Drawers are clear to enable to view contents. Drawers also fea...
Specs:
Height | 18.37 Inches |
Length | 15 Inches |
Number of items | 1 |
Width | 6.24 Inches |
🎓 Reddit experts on garage storage & organization products
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where garage storage & organization products are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
They are a great pets, and they force more vegetables into your life!
1. Yes! In some countries its actually considered animal cruelty to only have one pig.. It is mainly because they are prey animals and having a pair is the only way to maintain a sense of safety that allows them to get comfortable in the enviroment, thats why if youve had a pair for a long time and one dies the living one usually will do ok with just a ton of attention and love from the owner.
2. They do not "need" them. That said remember pigs are prey animals and they WILL attempt to hide all sickness/injury from you, so they dont get eaten.
3. Here are a few things I didnt know right away..
edit A few more thing i remembered..
Wow jeez... Im sure there is more but at this point i dont wanna get auto mod banned for spam or something haha.. Good luck!
A lot of us made mistakes starting out, but what's important is we learn from our mistakes, take the advice given, and improve the quality of life for our little buddies. I also understand having too small a space for a really big tank, but a 5g or even a 5.5g is really NOT that big... as reference, I originally had 3.5g tanks (the TopFin Enchant) for my bois with lots of water quality maintenance, but recently switched over to 5.5g tanks (TopFin Essentials kit) which fit in the EXACT same places the old 3.5g tanks fit (after doing a bit of cleaning and moving of stuff that didn't actually need to be there on the tabletop or simply sliding them over a bit). The tanks are just a bit more longer, around 16 inches long, but if you think about it, that's really not that bad and will fit fine on most nightstands or side-tables / end-tables or whatnot. I actually wish I had made the switch sooner. I see a NOTICEABLE difference in how much more active my bettas are now with the slightly larger tanks, even though they were quite active in the 3.5g tanks.
Do keep in mind that a filled 5g tank will weigh around 40 lb, and a 5.5g will weigh around 45 lb, so whatever you choose to keep them on should be able to support that amount of weight without collapsing (don't let that discourage you from getting the proper size tank though, just make sure to find sturdy furniture to keep them on :) and all will be well).
Here's some possible sturdy yet small shelfs/tables which will fit a 5.5g tank:
https://www.amazon.com/AmazonBasics-3-Shelf-Shelving-Unit-Black/dp/B01LWP8AL2/ (it says each shelf can support up to 250 lb). The only thing I would add (although optional, but would provide better support for the tank) is a sturdy but thin plank of wood to the top shelf surface for the tank to sit on top.
https://www.amazon.com/RooLee-Tables-Living-Vintage-Storage/dp/B07LC9F89R (another option that looks very sturdy, and would be amazing as a 5.5g aquarium stand, but costs more)
https://www.amazon.com/dp/B07TLLSN5R/ (somewhat costly but looks great and sturdy)
https://www.amazon.com/SONGMICS-Vintage-Assembly-Furniture-ULET41X/dp/B074WNTK3Q/
https://www.amazon.com/Sandusky-WS201232-B-Industrial-Welded-Shelving/dp/B00G2688AU/
https://www.amazon.com/Winsome-Wood-20218-Claire-Accent/dp/B000NPSGPS/ <--cheap yet good /sturdy according to reviews.
https://www.amazon.com/Sauder-419229-Canal-Street-Table/dp/B01DASJ3JM/
https://www.amazon.com/OROPY-Vintage-Storage-Shelves-Nightstand/dp/B07RGYVGQX 【 2 Tier Storage Shelves 】Product Size: 19.58’’ x 11.81’’ x 19.58’’ (LxWxH). 2-tier shelves made of rustic MDF boards create large storage and display space.【 Durable Iron Frame 】Crafted of strong iron frame, heavy duty and max weight loading capacity is more than 100 lbs. Coated with eco-friendly black matt paint. Rust-proof and long service life.
&#x200B;
Here's my 5.5g tanks with my anger-bois:
https://i.imgur.com/x7VLj4l.mp4
https://i.imgur.com/ty9t3RJ.mp4
Health and grooming-wise - nail clippers, pet shampoo, a blow-dryer if you don't have one (it's best to blow-dry them after bathing them), pet-safe wet wipes, tiny kitty toothbrushes and pet toothpaste, metal grooming comb, flea comb (not for fleas, just because their fur is so fine it really does a better job imo than the regular comb), Revolution for flea and heartworm treatment (you get it from your vet, so when you take them in right after you get them be sure to ask about it).
A baby gate if you have anywhere you need to keep them confined. Be aware that they'll initially be small enough to go through the pet gates with the vertical slats, so a grid gate works better.
Fencing supplies if there is anything you may need to fence off until you have a handle on the cats' behavior - cords, under the bed, etc. So what you do is you get zip ties and wire storage crates like these: https://smile.amazon.com/gp/product/B0735CKD6R/ and then instead of using the corner clips to make cubes, you just zip tie them together into a fence. You can use command hooks to attach the fence where you need it to go. It's not attractive but it's good for a temporary solution.
5 Five. (WHY does it keep starting me back at 1? Is there a secret to making the list continue with 5?) Kids like to do a lot of things to pets that pets don't necessarily want done to them. Ragdolls are very docile and won't fight back, but they may start to become unhappy and hide a lot or be unsociable. I've seen plenty of Ragdolls returned to the breeder or given up for adoption for this reason. Most cats will give a good whack if someone for instance pulls their tail, but a Ragdoll won't. It's a benefit in many ways but if you have a situation where the cat is getting harassed it's very distressing to the cat since they don't know how to respond. The only time my older cat has ever hissed or growled at me was when his leg was injured, and he's never hit or scratched me, and my kitten has only hissed and hit me (claws in) when I trimmed his claws and nipped the quick. So you need to be really on top of helping your child understand the cats' personal space and body language and learning to interact with them in ways that are not overwhelming and scary to the cats.
Fortunately, Ragdolls are people-loving and very social, so it'll be easy to have your daughter play with cat dancers, throw balls for them, etc, and pet and cuddle them and interact a lot with them. And mine are both totally fine with wearing clothes - the kitten ripped his tshirt off the first time I put it on him but all this weekend I had him in a pumpkin costume and he was fine with it. So you might want to pick up some small cat clothes if that is something that would delight your daughter. They're not too into hats but shirts without sleeves are great.
As a seller I make sure I am fully stocked and organized with all the appropriate packaging so when I do make a sale I can quickly wrap it and mail it out. I purchased all of my supplies from Amazon! I use pink tissues paper, patterned poly mailers and thank you cards from Amazon and they basically have paid for themselves. I also purchased a shelving unit from amazon that I have all my tissue and boxes and mailers stocked on to keep everything organized! I just like to have my items folded and wrapped in tissue to keep them protected and I think a thank you note is a very sweet and easy gesture. I also buy on Poshmark and am sometimes a bit grossed out when I receive an item that is not wrapped in tissue or wrapping at all and I receive it all wrinkled. I constantly order clothing online and most retailers always wrap the items inside the poly mailers, I just think of it as standard. Hope this helps!
Tissue- https://www.amazon.com/gp/product/B00AMD8TSA/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Thank you cards- https://www.amazon.com/dp/B0717BGJHJ/ref=sspa_dk_detail_8?psc=1&pd_rd_i=B0717BGJHJ
Poly Mailers- https://www.amazon.com/gp/product/B07BTKM45M/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
Shelving Unit-https://www.amazon.com/gp/product/B01M0XLTT5/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
There are options. How would you feel about building a cage? There are grid pieces (I purchased mine off of Amazon, but someone told me you can find them at Bed, Bath & Beyond) you can use to create your own guinea pig cage. I purchased a few sets of grid pieces and used them to raise the piggy cage off the ground (which guinea pigs prefer). An added plus is that I can store their stuff underneath the cage. Grid Shelving - I used zip ties to put mine together, which are inexpensive and effective.
If you want to put a top on, Big Box Home Improvement stores (Lowes, HD, Menards) carry wire shelves (the kind they use for closets) and you can have these custom cut to cover your cage (you will need to sand the edges, as they can be kinda sharp where they were trimmed). They are heavy, too, so, not easily lifted (and, if needed, you could potentially put a lock on it so that the piggy cage won't be breached). If really concerned, then zip tie two shelving pieces together at the middle, loosely enough so you can "fold" it open, and then zip tie the one towards the back of the cage to the grid pieces, so when you access the cage you can fold them accordion style or tip over the backside of the cage, so you have complete cage access. (I hope you can see what I'm trying to explain...sorry if I'm not being clear).
For the actual cage base, you have options. You can get a big piece of coroplast for the bottom of the cage or you could make something. I was not able to find a big sheet of coroplast, so I put some vinyl, sticky-backed tiles on a thin, flexible, foam board. Works just fine. An idea of what a C&C looks like: Guinea Pig Cages Store
Buying one pre-made is expensive. Building one is less expensive, but it can take a few weeks to get everything arranged the way you wish. I don't know what kind of bedding you use, but, I use fleece. It's a little expensive at the beginning, but, makes sense for the long-term.
https://i.imgur.com/V4ZkQq8.jpg
Pretty easy and straight forward. Very easy to set up. I had built a wood rack but felt this would be easier and more upgradable. It takes up very little room and it adjustable without cutting a single thing! Just check the dimensions for what will suit your needs. Mine is 36" wide and accommodates 2x systems on top and possibly 2x more systems on the bottom. Here are some links for the part links below. I went with the black one since it had a lower chance of conductivity. I made sure to put some fitting cardboard under the mobo just in case. I used twisty ties to hold the cards up which worked great. Could use some thing Zip-Ties if you know how you want it and can leave it. I had to move mine around a bit so the twisty ties were easier.
https://www.amazon.com/s/ref=nb_sb_noss_2?url=search-alias%3Daps&amp;field-keywords=Wire+rack
https://www.amazon.com/AmazonBasics-5-Shelf-Shelving-Unit-Black/dp/B018YLFJX4/ref=sr_1_4?s=home-garden&amp;ie=UTF8&amp;qid=1518741579&amp;sr=1-4&amp;keywords=Wire+rack
https://www.amazon.com/Layer-Shelf-Adjustable-Steel-Shelving/dp/B01G4N8JOU/ref=sr_1_9?s=home-garden&amp;ie=UTF8&amp;qid=1518741579&amp;sr=1-9&amp;keywords=Wire%2Brack&amp;th=1
https://www.amazon.com/Sandusky-WS241430-Shelving-Height-Shelves/dp/B078MKDZGZ/ref=sr_1_8?s=home-garden&amp;ie=UTF8&amp;qid=1518741579&amp;sr=1-8&amp;keywords=Wire+rack
https://www.amazon.com/Whitmor-Supreme-Shelving-Adjustable-Leveling/dp/B004BDP69M/ref=sr_1_12?s=home-garden&amp;ie=UTF8&amp;qid=1518741579&amp;sr=1-12&amp;keywords=Wire+rack
https://www.amazon.com/Whitmor-Adjustable-Shelving-Shelves-Leveling/dp/B004BDP692/ref=sr_1_18?s=home-garden&amp;ie=UTF8&amp;qid=1518741579&amp;sr=1-18&amp;keywords=Wire+rack
https://www.amazon.com/AmazonBasics-3-Shelf-Shelving-Unit-Wheels/dp/B01LZAV8KH/ref=sr_1_16?s=home-garden&amp;ie=UTF8&amp;qid=1518741579&amp;sr=1-16&amp;keywords=Wire+rack
I was in your position once, though I had a folding bike with a flatbar (so essentially a hybrid that folds). As someone mentioned below, getting Ergon grips with barends does at least get you a second hand position, but frankly, it looks like you've explored all the options and none are particularly exceptional. One of the additional costs to consider in conversion (in addition to the drop bar and brifters) is that the hybrid-style v-brakes are incompatible with brifters, and you either have to get road-style caliper brakes (best) or an adapter (look for a "travel agent"), which some say cause some sponginess or lack of feel in braking.
Anyway, I wouldn't say that someone that logs 100+ miles a week (20x3+40) is a "casual" rider, and I discovered that after doing a century ride, I felt the "versatility" of the upright, flatbar hybrid position was too limiting. It's a shame you have such a nice hybrid bike--frankly, I'm disappointed in the bike industry's push to get people onto hybrids, in my jaded view, they are simply a case of "jack of all trades, master of none" and the so-called "versatility" is just another word to sell bikes to people who are initially put off by the idea of lycra-clad roadies. Road bikes come in all kinds of geometries these days, and there are some pretty relaxed geometry bikes (they call them "endurance" these days) which should really be what's sold to the more "casual" rider instead of hybrids.
Anyway again, I sympathize with your apartment lifestyle... I ended up sucking it up and getting a real road bike after deciding that I like biking enough and I wanted to commit to it as a positive lifestyle/fitness change. Thankfully, since the other bike is a folding bike, the space addition wasn't huge. Maybe the solution instead is a really nice two bicycle rack :)
Ah, that's so annoying! Efficient storage will probably depend a lot on where in your building you have room to store things, but here's a couple ideas.
We have one of these from Amazon. You can buy a kit to make it hold four bikes - two on front and two on back. You just extend the pole to fit tightly between the ceiling and floor - no screws or holes. Plus it looks really nice. We are able to put it pretty close to the wall and still get the two bikes on the back side off - I put a wall hanging behind it to prevent marking up the walls. But this means our dining room is now a bike room *shrug*
I also saw this while looking for the link for you and think it looks pretty great for corner storage!
EDIT: The first thing you want to do, as in do this right now, is find the serial numbers of your bikes and record that information. This will be critical in the event that your bike is stolen.
*****
So for starters, you'll probably want two locks. A big, heavy U-bolt, as well as a cable/chain lock that you can put through the wheels. Ideally the cable/chain would have its own lock. Avoid those integrated rotary locks; they are shit. Here's an interesting guide testing the safety of a few popular models.
The theme of locking your bike is to make it too much of a bother to deal with. You can't make it impossible for your bike to be stolen, but you can make it hard enough that nobody will care. This framework also means it's a good idea to never leave a super-expensive bike unoccupied, ever. Your bikes look fine for general commuting/locking, though.
Looking for some advice about using furniture/appliance anchor like this:
https://smile.amazon.com/gp/product/B000VW7WBC
For example, using this kit, I can find a stud and attach one of the anchors to it. However, I'm afraid depending on what I want to anchor, like a refrigerator, I may not be able to find a place to drill the other anchor into it.
In this situation, would it be wise to use an adhesive like VHB tape or maybe something like PR100 super glue to attach the other anchor? I need this anchor to hold up in an earthquake situation. Thanks in advance to anyone who can provide feedback!
I feel your pain. If I were in your shoes I’d sure as hell want to bring my bike into my apartment too.
I’ve got two bikes I switch between regularly, and recently got this from Amazon. It’s right against the wall just inside my apartment, so I can hang them up and take them down easily just as I’m coming and going.
Don’t worry about hanging your bike by the rim of a wheel. Unless your frame is made out of ultra dense material from a collapsed star and weighs a ton you’ll be fine. I wouldn’t discount a pulley system with the ceiling, even if it’s tall either. Installation would certainly be a pain, but worth it once you got it done. I’ve seen some innovative setups on YouTube, you can look there for some inspiration and brainstorming. It’s also possible you could make something just to fit your needs in a DIY project. Before I bought my rack I was contemplating following some instructions online to make one myself out of $50 or so of PVC pipe or wood from a hardware store. Good luck with whatever you choose.
I bought a 3-tiered shelf and two growlights (2ft T5 24W 2000 lumen). The kit is great and came with everything needed to hang it easily on the shelf. This setup is in my sunroom which gets direct sunlight part of the day and a lot of bright indirect sunlight the rest of the day. Regardless my plants become etiolated if not directly by the window. Also all the colorful succulents I got have reverted back to green which I hope I can fix by incorporating grow lights.
My question is should I use two growlights or is one 2ft bulb enough for the shelf which is roughly 1ft x2ft? Also should I lower the amount of time I have the grow lights on since this room gets natural light? Please let me know if I should change anything. Thank you!
Since you can't put the books standing up vertically, try stacking them horizontally but still organize by size so they're mostly in neat columns.
You would want to put trinkets and misc items in their own containers, where related items all go in the same bin, but laid out in a way so you can see all of them and access all of them without having to move things--so not just one box with stuff stacked up it in randomly, unless you absolutely can't avoid doing so (sometimes, throwing shit in a box is really the only thing you can do haha). I find trays (like the lid of a shoebox, for example of height) instead of boxes to be best for this. Trays would be a great set up for you, since you said your shelves are deep but not tall.
To maximize the amount of space you have, you can add mini shelving within a shelf. So for example, on that top shelf, I can see you have a mug or cup of some kind. You could fit tiny shelf there, something that stands on its own, like this, so you'd have the cup where it is now alongside some other stuff, and then on top of it you could place more cups or a tray of other stuff.
You can get trays from the dollar store, use a shoebox lid, or even just cut the bottom of a tissue box off. All my trays are basically the lids for "memory boxes" I got from Michael's. I use the boxes themselves as closet organizers.
DIY is cool and all, but this is a truly awesome rack, cheap, and looks good enough to use in my on-campus office. (And it fits big MTB tires! Strong enough to hold up a bike upright with a single loaded pannier, too.)
https://www.amazon.com/dp/B001F9V842/ref=twister_B006JXYGW0?_encoding=UTF8&amp;psc=1
>Things I’ve already thought about are making sure we have electrical outlets in areas that I’ll be putting cameras
This isn't needed if you get Power Over Ethernet (POE) cameras.. which you probably should be using anyway...
Lesse...
How many and how big are the cactus you're talking about here? Because I have this 300W light, the only light my plants get, and they're doing amazing with wonderful stress coloring. I only have one 2x1 ft metal shelf with the light sitting on top and the second shelf full of my plants.
The Philzon looks like a wonderful growlight, too! Really powerful. And for that price? like damn! I'd go with that one.
How about a stand like this one?. If you go on /r/bicycling someone just shared theirs and it looks great. With tall ceilings you could even get three bikes on there, with the least used one up top but other two easily accessible.
Another option is something like these which would still keep them easy to access but out of the way.
Edit:I realise your ceilings are probably too tall for the first link but they also sell the same concept that you can kinda mount to the wall on one end, rather than relying on ceiling.
Here is where I store my candles and empty jars. I just moved and am so excited to have a candle room. I’m still organizing it, but I’m happy with what I have so far!
I bought the clear boxes from Target, which hold 14 candles. I bought the black storage rack from Amazon. The gray utility storage cabinet was also an Amazon purchase from 6 years ago, so I don’t have a current link.
No pictures of the shipping storage yet, like bubble mailers, boxes, tissue, etc. I also have a small closet full of my FOs and candle making supplies.
Hope that gives you storage ideas!
I have shelves, toolbox, and workbench along all of the walls that can fit them. Problem is, if I build along the sides of the garage then there isn't enough room to open the car doors (garage is pretty narrow for a 2-car). It's already pretty tight along the sides with lawn mower, roto-tiller, air compressor, etc. I do need to install pegboard over my work bench to hang tools, that will help free up a bit of space that I could then build some small shelves or drawers for smaller items.
I've seen the bike racks that go into the wall and actually used them at our previous house, I may have to take a trip to the hardware store and take a look. I also just found this for the bikes, I may try it out - may make for good winter storage at least.
So I'm in a 400 sq ft apartment, too.
I have a Fluval Spec V and an Imagitarium Pro (Petco brand) 3.7g. I keep the Spec V on this, which has its own dedicated part of the room, and the Imagitarium on this, which squeezed in nicely at my bedside. I think I could probably fit a 10 gallon on top of the wire shelves. Oh, and having shelves is nice because you can store aquarium supplies and other junk underneath your tank :D
Some additional advice you didn't ask for: If you're also living in 400 sq ft I assume you may be a broke student/freshly minted graduate and you may have tons of particleboard furniture. Think carefully before putting aquariums on that. A little water creeping under the veneer will make it swell a lot, severely compromising the integrity of the thing, and they're not terribly strong to begin with (an aquarium weighs roughly 10 lbs per gallon, check your maximum bearing loads!). Solid wood, strong plastic, or metal are the ways to go.
Depending on how many different colors of beads you have, small drawer organizers are a great way to sort, store, and retrieve beads.
This organizer comes with 39 drawers and this one comes with 60. You can use a label maker to label each drawer with the name of each color, which makes it way easier to restock beads since you can easily identify the exact color with the labels.
I currently use this ArtBin organizer, which is great to take with you on the go. It comes with removable dividers so you can make the spaces as little or big as you want. The downside to this organizer is that once you add all the colors, it's a huge pain to resort the colors, if you like to sort them rainbow-style.
They look like they're just garage shelving painted black. Something similar to this with black shelves. Actually pretty cost effective and very good looking.
These in particular are really cool because you break them in half to do a double wide half height set up.
Nicely done. Looks really good and I like the small profile. Just an FYI to anyone interested, a few dollars more gets you THIS
The wall racks are these:
http://www.amazon.com/Delta-Michelangelo-Two-Bike-Gravity-Stand/dp/B000ACAM38/ref=sr_1_4?s=sporting-goods&amp;ie=UTF8&amp;qid=1323268346&amp;sr=1-4
They're super easy to put together and they're actually super stable.
That looks really nice. I like the clean style.
That Ikea pole costs $30. The other stuff (brackets, hooks, square piping) would probably bring the cost over $50. Plus, you'd actually have to put it together. It's probably easier and cheaper just to buy a pre-made gravity stand. But I do like the look of that Ikea one.
I have a 2 bike stand that is free standing (http://www.amazon.com/Racor-Pro-PLB-2R-Two-Bike-Stand/dp/B000077CPK?ie=UTF8&amp;psc=1&amp;redirect=true&amp;ref_=oh_aui_detailpage_o00_s00). It can be bolted to the wall to assist it and be flush against it. The arms for each bike can be positioned independently and the hooks will swivel as well.
I know it looks wonky, but really I have one free standing in my garage with a 62 Steel Raleigh 3 Speed on the top part and while it does lean out some, it has been up for well over a year. That includes fumbling the bike around hanging it up and taking it down (damn thing is heavy), using it as a make-shift stand for tire changes, and just getting banged around.
You shouldn't store a bike with hydro brakes upside down, as any air trapped in the reservoir can potentially migrate up the line, but it takes a while for that to happen. I generally work on my bikes upside down, simply because that's how I worked on them as a kid and I'm more comfortable doing it that way. I've had my MTB upside down for hours at a time, never had any negative effects.
Turning it upside down a few minutes before every few rides can help keep the foam seals in the suspension fork wet with oil (depending on the fork of course).
I don't really think bikes are heavy enough to put wheels out of true by hanging them if you use the bike regularly. It's not like you hang the bike by the same exact spot every time. I use a feedback sports rack to store my bikes, simply back them into it and they stay upright.
You can get it at http://www.amazon.com/Delta-Michelangelo-Two-Bike-Gravity-Stand/dp/B000ACAM38, but it looks like the price went up. I only paid $50.
However, despite all the good reviews, I've had mixed feelings about it. My bike seems to be significantly heavier on one side, so more weight is on one of the hooks than the other. I'm a little worried it's going to snap one day.
Apart from that, I've been pretty happy with it and you can even hang two bikes on it if you want.
I built a stand that mounted like that--tension floor to ceiling--and hung bikes vertically, using wood. That was a while ago and I don't have good pictures, but it can be done if you are up for that sort of project. As an intermediate options, u/fallingbomb's stand, this one that goes up to 11.5 feet, or this one that goes up to 11 could serve as a good head start to setting up to hang bikes vertically, even though they don't have the right hooks and rear wheel guides for that yet.
Otherwise, you might like this simple one bike vertical stand, or this four bike vertical stand Or, for an expensive solution, this.
I have no idea why headphone stands are so expensive...
The cheapest and best looking option I have found for a headphone stand is using those Fast Track stands that are meant for hanging stuff up in the garage.
You can buy one here and here.
Here is a thread with pictures
I have a couple recommendations though. I cut up the plastic outer casing of a cd case to fit the width of the top railing. This gives it a nice curvature and supports the headphone band and foam better. It also doesn't leave indents on the foam. I glued the plastic to the stand and then got some spray paint and painted it black. It looks really nice. I have three stands.
I'm not at home, but can take pictures later if anyone wants to see what they look like.
That looks pretty cool. For those who need a two-bike stand, I just installed this guy. It's not free-standing as it needs a wall to lean on, but as long as you're not drunkenly stumbling by it 24/7, it doesn't need to be bolted into anything. It does have a small safety strap for those drunkards out there. :)
https://www.amazon.com/RAD-Cycle-Woody-Bike-Rack/dp/B01MXZZ87J
I got this and it works great for elevating a bike and having another hanging or leaning at floor level. Looks like this manufacturer's version is no longer being produced but there's another very similar by someone else linked in the Amazon page.
It presses between the ceiling and floor. I spray painted it white to match the walls too. Looks pretty good and no permanent marks.
I've been working with a 501(c)(3) non-profit that has helped recover over 6,000 stolen bikes. Happy to answer any questions about the trends/scenarios we see most frequently. There's also a monthly newsletter of recovery stories for your entertainment.
Bringing it inside is the best option if you can (though I would've gone with a slightly more elaborate solution for convenience.). For long term storage, I'd throw a u-lock on the rear wheel and lock it to the frame through the seat stays so you can't walk/ride it without removing the lock.
Best accessory I've bought the for the Jeep.
It's a Racor storage lift that uses any drill to lift it up. It's badass how well it works.
I loop ratcheting straps around the hardtop, and hook them into the platform. Then I get my drill and lift it right off, kinda like this.
For free-standing, this one is great. I had 4 bikes at my old apartment and had two of these racks side by side in my entry-way. If you want to hang them vertically, the link below is a great one.
free-standing
vertical wall mount
You caught me; I guess I do own one more bike accessory. I am living in a studio apartment, and this allows the bike to stand upright in one of the corners. I'm not trying to push you into buying a bike, just providing the solution I found to storing a bike in a small space. Best of luck on your road to minimizing!
Here's how you do it. Don't. Honestly, it's not worth potentially damaging the walls, as University Housing regulations usually have explicit rules about these things. Some even go as far as to say how you can affix posters and such.
Look into something like this or this if you're looking for something that won't take up space. Even though both can handle two bikes, you could always use the top rack and utilize the space below, or allow your roommate to use it as well.
You'll save yourself the time, potential repairs, possible fines, and be able to take this with you when you move into an apartment.
Here it is, exact model, my only gripes with it are that any under-seat bags need to be removed in order to have enough seat tube to properly seat it, and that the front wheel needs to be secured to the downtube with a velcro strap. Adds about 30 seconds to the process of storing the bike.
Others haven't had luck with fenders or rear racks- you'd have to eyeball your fender to see if it'd be clear, since the rear wheel rests on the frame at the 3 o'clock position, and I haven't had trouble with a rear rack (my bike is size 51 so that might be why).
I should also add that I haven't had any stability issues - the bike might wobble if you bump it as it's resting on a round tire and it's top heavy, but I've never had any issue with the bike actually falling over, even when I'm removing the chain and derailleur cage for cleaning.
The 'customers also purchased' links from that item have other designs of vertical floor stands worth considering, some that secure by the front wheel which makes the added step of securing the front wheel unnecessary.
If you are able/allowed, you could install pull out basket/"drawers". I use a coat closet for my pantry now and have a big lightweight plastic basket on the highest shelf storing seldom used paper good items. I also have some modular stacking basket shelf units because the coat closet only had the one upper shelf. (Like this, this, and this.)
I used to have a fixed pantry like yours though, and I mostly organized via baskets (see above), Rubbermaid dry storage, and things like this and this. Plastic bags and foil and stuff, I kept on a skinny laundry/pantry cart tucked in a weird nook in my kitchen. Now I keep those in a cabinet I don't have another use for.
I also have a few organizing basket things from IKEA, look online at their storage systems. Fixed pantries can be hard, get out your measuring tape and good luck!
Read up on the drywall anchors. They are probably rated for 50 pounds pulling straight down the wall, perpendicular to the anchor. You're going to be applying quite a bit of pulling out force. See what they are rated for with that. This may be listed on the anchor package for something like ceiling mount for hanging a plant.
You'll probably want a toggle bolt instead, as they have a higher pullout force. Look up the sort of thing done for hanging shelving and you'll see.
It may just be better for you, if possible, to get a wall rack that puts most of its load into the floor, like this one.
I have this for my JL hard too and it’s absolutely amazing. Best part is that you can use it for storage as well. It uses an electric drill to raise and lower it.
Racor - Ceiling Storage Heavy Lift - Up to 250 lbs https://www.amazon.com/dp/B0009I8AO6/ref=cm_sw_r_cp_api_i_ToQ3Cb5XV7RRF
Here is my current (year-round) setup! I moved into a new apartment with only north and west facing windows, and nothing was getting enough light. So recently I upgraded my setup.
I have the lights on for about 12 hours a day.
I used to have a clamp lamp with CFL, and that worked for a bit, but I was trying to squeeze too many plants under it so they started to get etiolated. In comparison, these lights are amazing. You can see that some of the plants were etiolated but are now growing compactly!
I got this pulley hanger and spray painted it white, and used this white parachute cord to give it more reach.
Works like a charm. I like to think of it as my "art" centerpiece.
The Racor bike lift is $25 and does a great job in apartments with high ceilings. I've got one installed in my tiny bungalow apt with a gabled ceiling and it's fantastic.
We bought a tall rack (like this) to house the terrarium for our beardie, but we also have a ball python, so we needed some extra space. We keep the bugs on the top most rack. We mostly feed dubia roaches, so there is a lot less noise. We do however have a cricket keeper similar to the one you are describing and have kept small to large crickets in there with none escaping on their own. However, I've had several escape while getting them out to feed and didn't realize they escaped until later.
As far as taking the remaining insects out of the tank - we never really did find a solve for this while feeding in the tank. It was always a pain to get all of the tank decorations out to find them all. What we did end up doing was purchasing a long shallow plastic tote to feed her in. We lined it with the same carpet that is in her tank (for traction). It took her a couple of days to get used to being fed outside of her enclosure, but she eventually got the idea and has not problem eating in it. I'm sure people have some comments about feeding outside the enclosure, but it works for us and it makes the clean up go so smoothly.
I have the following setup:
My succulents are in terra cotta pots on the shelves, but the light is strong enough to cover a number of other non-succulent plants in the surrounding area that are fine with indirect lighting. The lights supplement sunlight from a north facing window.
Its so you don't have to put screws through the furniture. They work by providing an anchor to counteract any force pulling from the other side. A child climbing a bookshelf is going to be pulling it away from the wall. However, the outward force exerted at the top isn't huge so a well secured velcro strap is strong enough to prevent the tipover. Just make sure it hits a stud on the wall side and you're good to go.
They also make other kinds if you want something more heavy duty.
Getting 10"x15" bags for around $0.10-$0.12 a piece shipped is really nice. That is as big as you can go in the VP215.
This is the "base" chamber model. Unfortunately it has a dry piston engine which can wear out faster and does need to cool down. Pros: it is cheaper and weighs only 46 lbs and requires no maintenance. Cons: can't replace motor parts and it draws slightly less vacuum, it is fairly loud and might require cool down time due to the motor.
https://www.youtube.com/watch?v=pqyjdfHh03c
I think this is about the cheapest place for it. https://www.webstaurantstore.com/ary-vacmaster-vp112s-chamber-vacuum-sealer/120VMASVP112.html
I have the VP215 which is the base home commercial unit. The same website linked above usually has the best price on it. Pros are you can replace parts that break, it even comes with the items to repair the seal bar if it burns out or breaks. Seal bar on a foodsaver breaks you have to buy an entire new sealer. It uses an oil pump which draws a higher vacuum and is a lot quieter than food savers and the 112S model.
The cons are it is a heavy unit. It weighs 84 lbs and needs 2 feet of height to fully lift the lid. The oil in the pump also needs to be changed after the first 25 bags or so to get manufacturing crap out and then every 600-800 bags thereafter.
To get around the weight I ordered a small rolling cart from amazon. This is it, cheap and the perfect size. https://www.amazon.com/AmazonBasics-3-Shelf-Shelving-Unit-Wheels/dp/B01LZAV8KH I suggest putting a thin piece of plywood or a sheet of cardboard on the top shelf to support the feet of the unit.
https://www.youtube.com/watch?v=o6OrseotfRw
There are of course other brands out there, but these are the ones I researched and know about.
> The only other stand I liked was this one for $38.50.
This is the one I have. It's sturdy, easy to use, and holds the bike securely.
This is what I bought for my apt. I would thing the difference in prices is from aesthetics and overall size of the rack. This gravity stand takes up less floor space and is less industrial looking then the one in your picture. Which could account for the higher price tag. I have one carbon bike on there now and it could easily hold another.
I'm sure that most all of them will work regardless of price. With multiple carbon bikes on a free standing rack I would look at the reviews to see if others have done the same.
I was born into it pretty much. Before I was born my dad raced motorcross, but gave it up and started racing mountain bikes shortly before I was born. For a few years he owned a bike shop when I was in elementary school.
For as long as I can remember, the third bedroom in my parents house has been the bike room, with about 6 or 7 bikes in there(and that's after I moved out, although a few of mine are still there)
I just got this stand and am going to build a stand for my bedroom to hold bikes this (can't drill holes in my wall) for the rest of my bikes that are at home. Well, I will never be able to fit the tandem in here.
I have two of these, it's a pretty good design: https://m.cb2.com/wood-bike-storage/s309683
You need to use drywall anchors though.
If you're not comfortable drilling into your wall, there are designs that just lean, like this:
https://www.amazon.com/dp/B000ACAM38/ref=asc_df_B000ACAM384987811/?tag=hyprod-20&amp;creative=394997&amp;creativeASIN=B000ACAM38&amp;linkCode=df0&amp;hvadid=167135146302&amp;hvpos=1o1&amp;hvnetw=g&amp;hvrand=1558497791528064728&amp;hvpone=&amp;hvptwo=&amp;hvqmt=&amp;hvdev=m&amp;hvdvcmdl=&amp;hvlocint=&amp;hvlocphy=9061331&amp;hvtargid=pla-154725647530
Do you mean like this ?
Actually this post got me thinking and now I’m thinking of doing this along the back window with a rolling cart in front. I think that will be a great use of space!
I have this rack. It leans against the wall, and while it's technically intended to hang the bike by the top tube, I just tested and it works perfectly fine hanging the bike vertically.
If you want to try it out without mounting anything try this. Takes some tinkering to get the arms and hooks to work well but I've been happy with it.
I use a Racor Storage Lift as a lift and it works pretty well; I replaced the metal cage with a couple 2x4s then just run tow straps to connect the top. There's no balance issues. Nice creeper head.
Depending on the space you have, you can look at something like this. They come in all sizes. It's what I use for mine and love it.
AmazonBasics 5-Shelf Shelving Unit - Chrome https://smile.amazon.com/dp/B01M0A4B9M/ref=cm_sw_r_cp_apa_i_g7Y3CbBGHGPXH
I use this here. I didn't stack them though, so I have the 2 halves side by side like this.. It's really nice to have the surface for brewing and tinkering around in the garage. You could get 2 and have a high shelf if you wanted as well.
I just got one of these and it is awesome, probably buying like 3 more.
http://www.amazon.com/gp/product/B0009I8AO6?psc=1&amp;redirect=true&amp;ref_=oh_aui_detailpage_o00_s00
You could just go with a gravity bike stand, and use the wall space without having to actually install anything.
I agree with bigred, though, anything that makes a bike visible above the fence line is definitely a security issue.
It's actually this one. The one you linked is very similar but not the same (note the knob in the middle of each crossbar). I just got this same one about a month ago and I'm very happy with it.
I use this in a garage with tight space. Works well enough for me. You might want some that stack vertically like this if you're really tight on space. You may be able to come up with a 3d printable design of a rack like this
You could add your own shelf perhaps:
https://smile.amazon.com/ClosetMaid-3456-Large-Shelf-White/dp/B00AES2XB2/ref=sr_1_4?keywords=cabinet+shelf&qid=1556837726&s=gateway&sr=8-4
then use these caddy things to store your supplies:
https://smile.amazon.com/mDesign-Plastic-Portable-Organizer-Bathroom/dp/B0765CQ9Q4/ref=sr_1_41?keywords=clear%2Bbin&qid=1556837938&s=gateway&sr=8-41&th=1
I don't know exactly how much space you have but these things are bomb too:
https://smile.amazon.com/Simple-Houseware-Stackable-Sliding-Organizer/dp/B078YZ2Q85/ref=sr_1_3?keywords=under+cabinet+drawer&qid=1556837681&s=gateway&sr=8-3
&#x200B;
Good luck!!!
I got mine off of craigslist, but you can get similar ones http://www.amazon.com/Delta-Michelangelo-Two-Bike-Gravity-Stand/dp/B000ACAM38/ref=sr_1_2?ie=UTF8&qid=1411905938&sr=8-2&keywords=gravity+bike+stand
Perfect for apartments where you don't want to drill anything.
You can buy them on amazon as well (for twice the price). I have two of these:
http://www.amazon.com/Racor-PBH-1R-Ceiling-Mounted-Bike-Lift/dp/B00006JBL3/ref=sr_1_1?ie=UTF8&amp;qid=1407096560&amp;sr=8-1&amp;keywords=racor+bike+lift&amp;dpPl=1
...and one from HF. I would rather have yours, honestly. On mine:
I've got one of these, it's a piece of shit but it gets the job done. You can move it around fairly easily but it needs a solid ceiling to push against as part of it's support.
Pretty sure it's the hanger part of this bike rack
EDIT: Here's a picture instead of an Amazon link
I use this.
http://www.amazon.com/gp/product/B0009J5NUY/ref=oh_details_o01_s00_i03?ie=UTF8&amp;psc=1
You tilt that baby upright and you have a nice plastic base with a top that looks like it was built to hold headphones.
AmazonBasics 5-Shelf Shelving Storage Unit, Metal Organizer Wire Rack, Chrome Silver (36L x 14W x 72H) https://www.amazon.com/dp/B01M0A4B9M/ref=cm_sw_r_cp_apa_i_Iy-2Db25EABYH
They are pretty reasonably priced too. Easy to assemble too.
A friend of mine gave me this bike stand, which leans against the wall at the top with a non-marking plastic piece and has non marking plastic feet. It has never fallen over or marked anything. The only problem is the handlebars will hit the wall, so I had to put fabric behind it.
It doubles as a repair stand for the top bike. But it doesn't have your storage, which I like a lot.
I've got one of these in my apartment. The arms are a bit fiddly, but I like it well enough.
I found that the little wire shelves that you can get to double your pantry or shelving area are nice. https://www.amazon.com/ClosetMaid-3456-Large-Shelf-White/dp/B00AES2XB2/ref=sxin_0_ac_d_rm?ac_md=0-0-c2hlbGYgZXh0ZW5kZXI%3D-ac_d_rm&amp;keywords=shelf+extender&amp;pd_rd_i=B00AES2XB2&amp;pd_rd_r=9e863b24-afce-4f4c-b042-dad654d80771&amp;pd_rd_w=Fvxud&amp;pd_rd_wg=jLiMQ&amp;pf_rd_p=983984df-2ad2-4c97-ba7f-4c5a90291c2b&amp;pf_rd_r=QBSJYQSPZW1V99XPX4NY&amp;psc=1&amp;qid=1569685004&amp;s=gateway
Lazy susans for canned good, spices, medications, you can get lazy susans with two shelves, and those are nice for smaller items. https://www.amazon.com/dp/B0036OQWT0?aaxitk=C04aQKaeELS.5S8eGrb3QA&amp;pd_rd_i=B0036OQWT0&amp;pf_rd_p=44fc3e0f-4b9e-4ed8-b33b-363a7257163d&amp;hsa_cr_id=4348174040901&amp;sb-ci-n=productDescription&amp;sb-ci-v=Copco%202555-0187%20Non-Skid%202-Tier%20Pantry%20Cabinet%20Lazy%20Susan%20Turntable%2C%2012-Inch%2C%20White%2FGray&amp;sb-ci-a=B0036OQWT0
Guaranteed if you have a lot of dishes, there are some you really never use. Pack those up and put them in storage somewhere, that way you are not throwing them away, if the wife is worried about that. You don't need 24 coffee cups, or bowls, for 3 people for daily use. Put stuff you only use once a year (christmas turkey roasting pan) in a plastic tote, and put it in the garage or basement. Better yet, if you have a kid who will be moving out in the next few years, start putting extra items in a tote for them to take when they move.
I recently moved, and like a nerd I mapped out my kitchen cupboards before I unpacked. Having things where you need them makes putting them away and finding them so much easier. Keep the coffee cups close to the coffee maker, the glasses near the sink, the spices close to the stove.
Mine isn't exactly as bad as most of the others, but attaching one of these to your belt loops and lifting yourself up is anything but comfortable.
I've been using this one for the past 5 years. Looks good, works good, price is right.
For my small apartment, I bought this off Amazon. It leans up against the wall and can be used as a bike stand for maintenance.
Edit: For $50 it's been great: amazon link
I have two of these in my apartment and they work great:
http://www.amazon.com/Swagman-Hang-It-Bike-Hanger/dp/B000GTNIQI/ref=sr_1_7?ie=UTF8&amp;qid=1313450289&amp;sr=8-7
First time I bought it, it was 55, second time it was 45. At 62 still cheaper than the "name" brand solutions.
Ah, ok. My big batch (5g) brewing is on LPG. I have a 3-Shelf Gorilla Shelf (thanks, Craigslist) that I set up a tear down on brew day. Both burners have stands, and it sets up a nice little, collapsible, 3-tier system.
My smaller batches (1-2g) I do on the stove top, and as you said, extra hands would just get in the way.
There are a bunch of stands that hold two bikes stacked like this.
one
two
three
four
And some others. I haven’t used any of them but they mostly have good reviews?
Home Depot's $16 lakos fans will do the trick: http://www.homedepot.com/p/Lasko-20-in-3-Speed-Box-Fan-3733/100405665 been using this with 3 rights at the same time and works great. I mount the rights on an amazon metal shelf: https://www.amazon.com/gp/aw/d/B01M0XLTT5/ref=mp_s_a_1_2?ie=UTF8&amp;qid=1505303915&amp;sr=8-2&amp;pi=AC_SX236_SY340_QL65&amp;keywords=shelving&amp;dpPl=1&amp;dpID=514ocr%2BzNML&amp;ref=plSrch
Someone shared this one in another thread here that I had found and saved awhile back: https://www.amazon.com/dp/B07F58LXFP/?coliid=I7R5Z94PLFVYG&colid=29QA2M1G0U5WS&psc=1&ref_=lv_ov_lig_dp_it
I've got a Delta Michelangelo in my living room. It freed up a nice chunk of space.
It's a 2 bedroom apartment shared with my wife. We both have beds so one will be used as our bedroom and one as a guest room. The apartment is fairly large with an open living room & dining room space. We have a fairly small couch, entertainment center and dining room table. We won't have a garage or outside storage. Hope that helps a little better. I was looking at the this stand but not sure I want to have 3 or 4 of them.
Heh, they have the same shelves on Amazon for about the same price here:
http://www.amazon.com/URWM184872BK-Storage-Adjustable-Shelves-Capacity/dp/B00DSAAYM8/ref=sr_1_1?ie=UTF8&amp;qid=1416032222&amp;sr=8-1&amp;keywords=edsal+shelving
There's a few different options for sizes. I only have one in my closet and that's all I have space for. I would love to get another one because it's usually full but I don't have much room for a second. I want to expand my inventory. There are plenty of things I see that I'd like to buy but I know I don't have the space for it all. :(
I agree. A good one i've been eyeing is https://www.amazon.com/dp/B000ACAM38/?tag=thewire06-20&amp;linkCode=xm2&amp;ascsubtag=AgEAAAAAAAAAAOxTAAAAADL8AZ8AAAAAWmuDog
Something like this freestanding rack would look good in the corner where bikes/sofa box are in the pictures
I found it on Amazon. It's perfect for my place, until I wind up with another bike...
Heres the link: http://www.amazon.com/gp/aw/d/B000GTNIQI/ref=mp_s_a_1_20?qid=1427577296&amp;sr=8-20&amp;pi=AC_SX110_SY165_QL70&amp;keywords=swagman+bike+rack&amp;dpPl=1&amp;dpID=21XFEG36K4L&amp;ref=plSrch
There are some upright stands that sit on the floor that may be a good option, depending on your space. Like this one: https://www.amazon.com/dp/B06XXSHGWR/ref=cm_sw_r_cp_api_i_XirnDbWE1N2AF
http://www.amazon.com/Delta-Michelangelo-Two-Bike-Gravity-Stand/dp/B000ACAM38/ref=sr_1_3?ie=UTF8&amp;qid=1413161565&amp;sr=8-3&amp;keywords=home+bicycle+stand <-- Something like this? I'm not endorsing that specific product as I've never tried it, but something along those lines sounds like what you are looking for.
Rubbermaid FastTrack Hose Hook - It works beautifully. Beware! It will not work for full sized Audio Technica headphones (AD700, W5000). It will work for the m50 though.($15)
Audio-Technica's Headphone Stand (~$64)
Cases
Hippocases - for small amp and headphone storage
Large tall pieces of furniture like a wardrobe, display case, drawers and even tvs always tell you to bolt it to the wall or use tip over safety straps (https://www.amazon.com/Hangman-Anti-Tip-Kit-Furniture-Prevention/dp/B000VW7WBC).
Storage and organization:
Agreed. Very simple. Worth the money. I can vouch for this model.
Given the chance, it'll stand on it's own fully loaded.
Half the price, and works absolutely great. I've shaken the crap out of this thing with 2 bikes on it, and even on carpet, it doesn't slide or teeter. You're gonna want to make sure it's screwed into a stud, but it has worked great.
Not much to add that others haven't already, except that if you're looking for a sturdy, tough-looking headphone stand, I dug up a Rubbermaid Hose Hook that works perfectly.
Best bet is to use these, and then ventilate your room if you have a lot of equipment.
https://smile.amazon.com/AmazonBasics-5-Shelf-Shelving-Unit-Black/dp/B018YLFJX4/ref=sr_1_5?ie=UTF8&amp;qid=1525232258&amp;sr=8-5&amp;keywords=rack+shelf
The shelving like this is very sturdy. It would definitely hold up to lots of jars.
I would suggest this one. You can put essential colors in the big ones (black, white, etc.) and other colors in the small ones. The small ones hold a bag of 1,000 perfectly, while the big ones hold around 4,000. I got mine for around $18 at Lowe's.
I bought this in grey a while ago and it’s the best thing ever.
YYST Clear Light Saber Wall Mount Wall Rack Wall Holder - Hardware Included.[Amazon Clear Lightsaber Mount ]
https://www.amazon.com/dp/B07F58LXFP/ref=cm_sw_r_cp_api_i_PzgsDb55Y9FFN
The mount pictured.
For vertical to about 45 degrees. Clear mount.
YYST Clear Light Saber Wall Mount... https://www.amazon.com/dp/B07F58LXFP?ref=ppx_pop_mob_ap_share
What's the weight limit on those shelves? With a single sawdust bag or straw bucket weighing so much I ended up going for this shelf, rated at 350lbs/158kg per shelf, with this cover. The top two shelves on the inside have an additional layer of plastic sheeting to use as a high humidity fruiting chamber, and when I buy another shelf the whole thing will serve as one. The only drawback to it is that straw bags are too bulky, but I've got six sawdust colonies/two straw buckets/a log/a dozen or so grain spawns/two LCs/my agar stuff and still have like 40% of the space left.
Just got sent this link by a friend. I just bought a house with an 8' door so I can drive inside with the tent on (that was a requirement for any house I got). I was planning on building something to store the tent, but this is practically exactly what I was looking for anyway!
Figured a few people here might want the same thing.
*edit, and for those who can't see the facebook post, here is the amazon link!
https://www.amazon.com/dp/B0009I8AO6/ref=cm_sw_r_cp_apap_WMUcd1BDsfqBC
For those with deskspace a Rubermaid Hose Hook. Ok ok so it's a $11 dollars, but it makes a cool, easyish to find in-store, affordable headphone/headset stand.
I only mount it when going on trips. Pully is a great idea. Here is one I'm looking at getting: https://www.amazon.com/Racor-PHL-1R-HeavyLift-4-Foot-Cable-Lifted/dp/B0009I8AO6/ref=s9_psimh_gw_g469_i1_r?_encoding=UTF8&amp;fpl=fresh&amp;pf_rd_m=ATVPDKIKX0DER&amp;pf_rd_s=&amp;pf_rd_r=3NF3WKD5SFQTJVCSBVX7&amp;pf_rd_t=36701&amp;pf_rd_p=a6aaf593-1ba4-4f4e-bdcc-0febe090b8ed&amp;pf_rd_i=desktop
I have this: https://www.amazon.com/Delta-Michelangelo-Two-Bike-Gravity-Stand/dp/B000ACAM38/ref=sr_1_1_sspa?s=hi&amp;ie=UTF8&amp;qid=1519911674&amp;sr=1-1-spons&amp;keywords=vertical+bike+rack+apartment+wall&amp;psc=1
Works great.
These work great. Literally had a dresser tip over once with someone hanging on it and it still didn't fall over.
https://www.amazon.com/Hangman-Anti-Tip-Kit-Furniture-Prevention/dp/B000VW7WBC
I own this (I didnt know it was an as seen on TV product). It's great since I live in a rental and cant put up bike racks. It also makes the space much more compact since it stores the bikes vertically. It cant handle heavy bikes, and it isnt sturdy so dont place it where itll be in the way. Here is the link for the one I bought since TV products are cheap. https://www.amazon.com/dp/B06XXSHGWR/ref=cm_sw_r_cp_apa_sjjJBbF5M6ZN3
u/lavenderfart ^
coroplast walls is what it sounds like you need. i use these wire shelves for daphne's cage and have added 10 inch walls to prevent her from climbing out. here is a picture of what my setup basically looks like
Oh ok, what about something like this?
We went to our LBS and they were remodeling so they gave us this for $50. If you have 10 foot ceilings you could probably fit 3 bikes on it. It uses pressure from the bolts at top and bottom. No drilling required.
&#x200B;
Here's the amazon link https://www.amazon.com/2021-Cycle-Woody-Bike-Rack/dp/B01MXZZ87J/ref=sr_1_2?keywords=wooden+bike+hang&qid=1563942468&s=gateway&sr=8-2
&#x200B;
also it looks like they sell the rungs to add an extra bike. https://www.amazon.com/gearup-OakRak-Extra-Bike-Black/dp/B000NPCSU2/ref=pd_bxgy_468_img_2/132-5224801-8525738?_encoding=UTF8&pd_rd_i=B000NPCSU2&pd_rd_r=967a2b21-3225-47a5-845e-efa073314a82&pd_rd_w=iDFS4&pd_rd_wg=CmDzm&pf_rd_p=a2006322-0bc0-4db9-a08e-d168c18ce6f0&pf_rd_r=DMYGNJ9ZKPHSKKQGTDZ3&psc=1&refRID=DMYGNJ9ZKPHSKKQGTDZ3
“Just Airflow” huh? I call BS, look at this
Perfect Airflow and nothing else.
I used to have something like this, but these racks ultimately have too big of a footprint for narrow hallways, and take up a lot of space in a room. I went with something like this and mounted as flush against the wall as possible, and into the ceiling.
Looks like the same one I got. I like it a lot.
Here's the link: https://www.amazon.com/gp/product/B07F58LXFP
is the jeep in the garage? what type of doors? something like this would probably work well with full doors. roll the window down and hook the frame. mount the wider than the tub so you can back in between the doors.
Check the height of your ceilings - we ended up not getting one of those because the only model tall enough was freaky expensive. Instead we got a the two-bike gravity stand. Ours was only $50, but we found the last one at Target on sale - they must have been getting rid of them.
For the ceiling mounted models, I would be less worried about the deposit and more worried about what your ceiling is made of. If you live in an older building, ceiling mounts can be a great way to pull your entire ceiling down. You definitely won't get your deposit back if that happens.
I just picked up one of these on REI w/ my 20% members coupon (still waiting on delivery) and I've heard a lot of good things.
There's these guys if you really want vertical standing. I'd been considering buying one for my office. I was concerned that the bike would fall forward if someone bumped it, though.
\^ This is a better cart than what we use, but if you need something that you can pack down flat, wire carts are ok. (https://www.amazon.com/AmazonBasics-3-Shelf-Shelving-Unit-Wheels/dp/B01LZAV8KH/)
I struggled to store my bike in my flat, but then I got one of these;
Thane Bike Nook - Free Standing Bicycle Stand for Indoor Storage https://www.amazon.co.uk/dp/B06XXSHGWR/ref=cm_sw_r_cp_apa_i_9PCsDb1YF0YY4
Took up far less room than when it was horizontal. Might be an option for current an new place?
When I had a condo I used one of these in a closet to increase our storage. It worked really well.
Delta Cycle Michelangelo Two-Bike... https://www.amazon.com/dp/B000ACAM38?ref=ppx_pop_mob_ap_share
I have a gravity rack and it is AWESOME! No need to drill holes in the wall or worry about structural integrity.
I know this isn't the answer you're looking for, but have you considered alternate methods for storing your bike(s) in the apartment? For example something like this
This is my cheap alternative to a laptop stand. I’ve been using it for over a year now. And it’s fantastic.
premanufactured shelving units (as opposed to building your own). what brands / models can you vouch for? I've searched r/flipping's history for this question and couldn't find much.
I like this quality, but I like this price.
I actually found this on Amazon for just under $20, and it will safely hold two 10-gallon tanks with rocks. I’ll buy it soon if I can find space for it!
Here is a drill-less option that can hold two bikes:
https://www.amazon.ca/gp/product/B000ACAM38
I actually use this in my garage to keep both bikes off the ground. I did NOT need to drill anything into the walls as it simply leans against it, it's surprisingly stable.
> https://www.amazon.com/Greenpro-3309-Hardware-Storage-Organizer/dp/B073Q6GWPJ/ref=mp\_s\_a\_1\_12?ie=UTF8&amp;qid=1535557986&amp;sr=8-12&amp;pi=AC\_SX236\_SY340\_QL65&amp;keywords=screw+organizer
Really just get the same bins. You want them to be the same overall size so they stack next to each other nicely.
I actually find this really simple and useful https://www.amazon.com/dp/B000ACAM38/ref=cm_sw_r_cp_apa_i_61tNDbEHJ6YQP
I just put THIS tutorial up. It can be made for under $50 if you have a drill at home & a way to cut wood at store or in home. If you're on a budget just get a Wire Shelf Rack, stick everything on a table w/ cards on top of rack & call it a day. If you have pets though they can easily knock the cards over so I'd go with a milk crate or something more substantial.
I use wire squares around areas with cords to keep Marble from chomping them , but if you're living with escape artist bunnies they probably figured out they can jump over things.
Did something change recently in the home environment? Marble goes insane when the seasons shift until we get the thermostat adjusted back to where he wants it. Are they kept in a room where there's usually a person present?
First thing to resolve would be how they're escaping their pen. If you put them in the pen during the day do they try to stage a jail break so you can see how they're getting out?
I ordered the mounts from Amazon. They work really well.
https://www.amazon.com/YYST-Clear-Light-Saber-Holder/dp/B07F58LXFP?ref_=ast_bbp_dp&amp;th=1&amp;psc=1
You can get all the pvc and glue for about $11, sand for $4, depending on where you shop.
Cool thing about this is that it grips the tire from the top and bottom making it more stable compared to the wide stand you are showing for 5-10 bucks more.
The only other stand I liked was this one for $38.50. Or the Pro 29er which I own but did not fit my wheel.
Why the wood things at the bottom of the wheels? No need. Just hang it from the ceiling with a pulley system. Easier to get up and down, and you can store it higher. These are ~$20 and work very well.
Best shelving rack for two 20g long? Thinking about this but maybe the 4 shelf version https://smile.amazon.com/dp/B018YLFJX4?th=1
I have this gravity stand from Amazon. I don't have a convenient stud to secure it to so it is currently freestanding. It allows you to spin the wheels on both bikes. It's too awkward for our commuter bikes since the rear racks screw up the weight distribution, but it works just fine for the road bikes.
I'd also like to know if anyone has any ideas on how to store a Super 73 vertically.
They do sell vertical bike racks but I feel it would be too heavy / not fit correctly:
https://www.amazon.co.uk/Thane-Bike-Nook-Standing-Bicycle/dp/B06XXSHGWR/ref=sr_1_1_sspa?keywords=vertical+bike+storage&qid=1570816548&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExMFlRRkpZTVJKRlU1JmVuY3J5cHRlZElkPUEwNjA5NDYyMjJHMDNMSFZBNVFDUyZlbmNyeXB0ZWRBZElkPUEwMTU3ODc3NTZPSUQzR0Y1UVZLJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
Mines just taking up a lot of room next to my dining table at the moment.
I use this one. It's cheap, stands on its own, and (I think) looks better than the one you posted.
http://www.amazon.com/Delta-Michelangelo-Two-Bike-Gravity-Stand/dp/B000ACAM38
I suggest getting some kind of bike rack for the apartment in the future. My wife and I live in a small 1 bedroom apartment and manage to store 2 full size bikes on one. I hope you find it. Anything left outside will be stolen/vandalized given enough time.
Those lean against the wall style bike hangers work better than I expected they would. We keep both our bikes in the entryway to our apartment and they barely occupy any space.
We got this one for $50.
https://smile.amazon.com/gp/product/B000ACAM38
We have this (or something similar). Looks classy for a bike rack and you can buy a kit to hang an additional two bikes on the back, so four in total.
Would keeping a PC on a chrome cart cause any issues? I need my PC to be semi-mobile and I'm looking at something like this.
I bought this off amazon: http://www.amazon.com/gp/aw/d/B000077CPK/ref=mp_s_a_1_5?qid=1421954866&amp;sr=8-5&amp;pi=AC_SX110_SY165_QL70&amp;dpPl=1&amp;dpID=51JHYBVKSZL&amp;ref=plSrch
It fits 2 29ers comfortably with wide bars. The wheels just have to sit at a slight angle.
Something like this might help add some lower storage:
AmazonBasics 4 Cube Wire Storage Shelves - Black
https://www.amazon.com/dp/B0735CKD6R/ref=cm_sw_r_cp_api_i_prGCCbB58KJ64
Or use something like these stackable crates:
http://www.spacesavers.com/Storage/Plastic-Storage-Crates
Can you set up a small rack/storage shelves? Most gear will fit on there and you can use hangers on them too.
E.g.,
https://www.amazon.com/AmazonBasics-3-Shelf-Shelving-Unit-Chrome/dp/B01M0XLTT5/
Finally back from vacation. Here's the link as promised. If you end up getting it and installing it, send a pic!
http://www.amazon.com/Swagman-Hang-It-Bike-Hanger/dp/B000GTNIQI/ref=sr_1_14?ie=UTF8&amp;qid=1346055685&amp;sr=8-14&amp;keywords=wall+bike+rack
This off-brand 2-bike gravity rack: https://www.amazon.com/gp/product/B000ACAM38/ref=oh_aui_detailpage_o06_s01?ie=UTF8&amp;psc=1
Holds both of my bikes securely, was very cheap, and no marks on the walls. My landlady likes it so much that after seeing mine, she has started providing them to all of her tenants with bikes.
This is what use to put mine on and off. Turns a tough, unsafe job into a piece of cake. I removed mine and put it back on once by myself, by hand. Never again.
https://www.amazon.com/gp/product/B0009I8AO6/ref=oh_aui_search_detailpage?ie=UTF8&amp;psc=1
Absolutely, and you have a couple of options. First is a wall stand like this:
http://www.amazon.com/Racor-PLB-2R-Two-Bike-Gravity-Freestanding/dp/B000077CPK/ref=sr_1_1?ie=UTF8&amp;qid=1367802540&amp;sr=8-1&amp;keywords=racor+gravity
Only needs one non-load-bearing screw at the top to prevent it wobbling, not too expensive, very sturdy. I have two of these at home.
Option two is something like this:
http://www.formulafoto.com/bikes/quiver.jpg
You can screw that into the studs in your wall and hang each bike with only two small holes.
Option three is to use the same type of hanger along with good quality drywall anchors:
http://www.lemurzone.com/rfg/wp-content/uploads/walldriller.jpg
Those will let you have ~50lbs without needing studs, but they leave slightly larger holes. Nothing that can't be taken care of with a bit of spackling when you move out though, and this has the upside of being able to put them wherever you want instead of just where studs are.
More of a storage option but could be used as display as well. I have 2 of them. This size will hold ~80 pairs in boxes.
Edsal URWM184872BK Black Steel Storage Rack, 5 Adjustable Shelves, 4000 lb. Capacity, 72" Height x 48" Width x 18" Depth https://www.amazon.com/dp/B00DSAAYM8/ref=cm_sw_r_cp_api_sA2iyb7BH2BVG
Return it and buy one if these.
https://www.amazon.com/dp/B01LWP8AL2/
Similar size, slightly cheaper, and WAY stronger.
This is the mount I used. Just three small screws/anchors to attach.
YYST Clear Light Saber Wall Mount Wall Rack Wall Holder - Hardware Included. https://www.amazon.com/dp/B07F58LXFP/ref=cm_sw_r_cp_api_i_.rl0DbXD5WFPH
I ordered this Rubbermaid FastTrack Garage Storage System Hose Hook over 5 years ago and haven't regretted it since. I have one at home for my gaming headset and one at work for my Audio Technica m50x's. The rubber edge where you place the hose works well as a base and you just put the headband of the headphones on the up turned plastic piece.
http://www.amazon.com/gp/product/B0009J5NUY
You can use an indoor rack like this: https://www.amazon.com/Racor-Pro-PLB-2R-Two-Bike-Stand/dp/B000077CPK/ref=sr_1_5?ie=UTF8&amp;qid=1510610212&amp;sr=8-5&amp;keywords=bike+stand that gets two bikes in one vertical-bike spot of stourage.
Would something like this work? Most don't even require drilling. Google gravity stand bike racks
http://www.amazon.com/gp/aw/d/B000077CPK/ref=psdcmw_165113011_t1_B000ACAM38
Turn this hose bracket on its side like this: http://i52.tinypic.com/riyyd4.jpg
Maybe something like Delta Cycle Michelangelo https://www.amazon.com/dp/B000ACAM38/
I considered flashing lights in the garage but I'm scared I'll just ignore them or not notice them, only one (potentially expensive) way to find out haha.
As for multiple users, I think that's a minor issue right now. It's a detached one car garage that is strictly used to store a car.
The bike stand in my house is a gravity stand. I guess I could potentially put a load cell between the contact point on the wall. I think it would need to be pretty sensitive. I don't think a lot of pressure gets put on that contact point from a road bike. I haven't been able to think of a good way to do a load sensor for this type of bike stand.
You could try something like this. It expands and braces between the ceiling and floor, so you won't be touching the wall and won't be nailing or bolting in to anything.
Swagman Hang It Bike Hanger
https://www.amazon.com/dp/B000GTNIQI/ref=cm_sw_r_cp_api_dshIzbMAYX2GW
I have this which has worked well for me. Just expands to push against the floor and ceiling.
https://www.amazon.com/gp/product/B000GTNIQI
Something like this https://www.amazon.com/ClosetMaid-3456-Large-Shelf-White/dp/B00AES2XB2/ref=sr_1_5?ie=UTF8&amp;qid=1496006712&amp;sr=8-5&amp;keywords=cabinet+rack
Something like this:https://www.amazon.com/AmazonBasics-5-Shelf-Shelving-Unit-Black/dp/B018YLFJX4/ref=sr_1_2?ie=UTF8&amp;qid=1520475172&amp;sr=8-2&amp;keywords=amazon+basics+shelf&amp;dpID=41QAOA7u5WL&amp;preST=_SY300_QL70_&amp;dpSrc=srch
Get something like this
Get a 3-shelf moving cart like this
https://www.amazon.com/dp/B01LZAV8KH/ref=cm_sw_r_cp_tai_9GqXBb5T6E6VE
Something like this:
https://www.amazon.com/dp/B073Q6GWPJ/ref=cm_sw_r_cp_apa_i_3t.FDbWH1BDN3
If I were you, I would start with an ord bot rather than an I3. I have both, and the ord frame is much more rigid and easier to upgrade.
there used to be a 300x300mm heated bed from punacatt. From what I recall, it needed its own power supply. People built several 12"x12" ord bots by just swapping out two of the makerslide sections and one regular extrusion section.
If you look at the very large builds online (24"+), you'll see that most don't use a heated bed and have an enclosed build volume instead.
What I did was take a steel shelving unit and enclose the level that has my printer on it.
http://www.amazon.com/Boltless-Storage-Shelves-URWM184872BK-Capacity/dp/B00DSAAYM8/ref=sr_1_3?ie=UTF8&amp;qid=1410545715&amp;sr=8-3&amp;keywords=steel+shelving
Im a big fan of the Delta Cycle 2 bike stand.
For the third, you may just go with a hook to store it vertically.
Thanks! I got mine used but I think this is it https://www.amazon.com/Racor-PLB-2R-Gravity-Bike-Stand/dp/B000077CPK
We have a 2 story, 900 square foot home. We are lucky to have almost all of our space completely utilized, however, the staircase (U-shaped) takes up a fair portion of our floor plan. Also, we have no place to store our bikes. We live in an urban area where bike theft is common, so they need to be inside. Right now, they are sitting in our living room. It would be nice to have a place to put them, but normal bike stands like this won't fit anywhere in our house.
Not sure if this is an option for you but I have limited storage space in kitchen so I got something like this (they have different sizes) and I got large containers with lids to insert into some of the shelves, inside the containers you can store the glass containers.
What's wrong with bringing them inside? Placing them on something like this takes them out of the way and keeps carpet clean.
Can't really beat a baker's rack even though it's overkill. The shelves are sturdy enough to hold supplies as well.
https://www.amazon.com/AmazonBasics-5-Shelf-Shelving-Unit-Chrome/dp/B01M0A4B9M/ref=sr_1_8?ie=UTF8&amp;qid=1526670122&amp;sr=8-8&amp;keywords=bakers+rack
The Delta Cycle Michelangelo Gravity Stand Storage Rack which is highly recommended by TheSweetHome
My link is for a 4-bike version of the stand. They also offer a 2-bike stand for much cheaper.
Do you have space for a shelf? I got a wire shelf off of Amazon. Here.
Anti-Tip brackets are/were needed here. Something like these:
Hangman Anti-Tip Kit - 400 Pound Falling Furniture Prevention Device (TK-400) https://www.amazon.com/dp/B000VW7WBC/ref=cm_sw_r_sms_c_api_-QdBybPCYTZH3
I like the 2 AmazonBasics 5-Shelf Shelving Units https://www.amazon.com/gp/aw/d/B018YLFJX4?psc=1 I got for my games. I wouldn't say they're "nice" looking, but they're sturdy, hold about 50 games each, and the shelves are modular so you can alter the height of them. I have the first shelf a bit higher than all the others to store Gloomhaven and TI4 and other big-box games on the carpet, for example.
I use this stand - which actually doesn't hurt the walls very much.
http://amzn.com/B000ACAM38
Amazon - Delta Michaelangelo bike rack
I got two Feedback Rakk stands. It has a swing arm that push the bike into. There are a few knock-offs on Amazon. Or vertical arm style. You can also get simple floor racks.
Have seen people post DIY stands in last month: wood and PVC.