Reddit mentions: The best gun swivels
We found 104 Reddit comments discussing the best gun swivels. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 40 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Uncle Mike's Quick Detachable Ruger Auto and Single Shot Carbines Sling Swivels (Blued, 1-Inch Loop)
- QD design stops metal swivel body from contacting gun
- Fore-end adapter with stud installed in the barrel of gun
- .5-inch wood screw for fore-end stock mounting
- Swivelock® spring-loaded plunger and knurled, threaded sleeve eliminates accidental opening of swivel
- Fore-end adapter fits barrel band of 10/22, .44 Mag. and No. 3 carbines
- ½" wood screw for fore-end stock mounting
- Swivel Lock spring-loaded plunger and a knurled, threaded sleeve eliminates accidental opening of the swivel
Features:
Specs:
Color | Black |
Height | 5.62 Inches |
Length | 1.25 Inches |
Weight | 0.13125 Pounds |
Width | 3.12 Inches |
Size | 1" |
Number of items | 1 |
2. Braudel Sling Swivel Mount Qd Quick Detach/Release 1.25",Heavy Duty Push Button Swivels (2X QD Sling Swivels)
➤SUPERIOR QUALITY - Our qd sling swivels are made of high strength steel with black oxide finish to ensure maximum durability under heavy use.➤PERFECT SIZE - Heavy duty push button QD sling swivel with 1.25 inch loop, fits slings up to 1.25" Wide.➤EASY TO USE - Contoured design for easy one ha...
Specs:
Color | 1.25" Oval |
3. Uncle Mike's QD 115 RGS Bolt Action Wood Screw Type Sling Swivels (Blued, 1-1/4-Inch Loop)
- Installs without dismantling gun
- 1/2-inch deep-threaded wood screw and fore-end base
- Swivel Lock spring-loaded plunger and a knurled, threaded sleeve eliminates accidental opening of the swivel
- Closed Link technology creates a permanent ring bond
Features:
Specs:
Color | Black |
Height | 5.5 Inches |
Length | 1.12 Inches |
Weight | 0.01 Pounds |
Width | 3.12 Inches |
Size | 1 1/4" |
Number of items | 1 |
4. Uncle Mike's Non Tri-Lock Sling Swivels (Blued, 1-Inch Loop)
- Same silence and ruggedness as the original without the Tri-Lock feature
- Better fit for molded stocks with molded-in swivel studs
- Same silence and ruggedness as the original without the Tri-Lock feature
- Better fit for molded stocks with molded-in swivel studs
- Swivel Lock spring-loaded plunger and a knurled, threaded sleeve eliminates accidental opening of the swivel
Features:
Specs:
Color | Black |
Height | 5.62 Inches |
Length | 0.62 Inches |
Weight | 0.1 Pounds |
Width | 3.12 Inches |
Size | 1" |
Number of items | 1 |
5. TRIROCK Sling Swivel 1.0 Inch with Push Button Quick Release Detachable and Sling Mount QD Loop Adapter 2 Sets Pack
- Rapid Push Button Detachable Swivels. QD sling swivel.
- Easy to install, and versatile.
- Flush-mount front and rear bases for stud-free profile when sling and swivels are removed.
- Bases glue in place, no screws required.
- With 1 inch Sling Loop. Fit for keymod or M-lok mount adaptor.
Features:
Specs:
Color | Black |
Length | 6 Centimeters |
Weight | 0.02 Pounds |
Width | 5 Centimeters |
Size | 1.0 Inch |
6. Uncle Mike's Tri-Lock Quick Detach Blued Sling Swivel Set, 1 1/4-Inch
Super heavy-duty swivelsFor rifles that have swivel base installedMade to military specificationsSilver are nickel-platedIncludes 2-super swivels (no studs come with these swivels)Flawless fit and silent operationDetaches quickly, yet provides positive locking for safetyThree-lock system for optimum...
Specs:
Color | Black |
Height | 1 Inches |
Length | 5.5 Inches |
Weight | 0.08 Pounds |
Width | 3.25 Inches |
Release date | February 2010 |
Size | 1 1/4" |
Number of items | 1 |
7. Yosoo Swivel Screws Swivel Wood Screw Studs,3PC Detachable Swivels Mounting Kit Swivel Studs Screws Set Swivel Stud Base
Widespread Application: This is a set of Allen Sling rotary stud kits. The Screws Swivel Wood Screw Stud is ideal for mounting slings on rifles or shotguns.Package List: The kit comes with 3 slings, 2 screw-in and 1 bolt with nuts, 3 white washers and installation instructions. Studs will be used wi...
Specs:
Color | black |
Size | Small |
8. JIALITTE M-lok QD Sling Mount Sling Swivel 1.25 Inch Adapter Attachment for M lok Rail
Heavy-Duty QD Sling Swivel made from high-strength steel,M-lok Standard adaptor Machined from aircraft grade aluminum with matte black hard coat anodizeSling Swivel can be rotated 90 degree and stopped by releasing QD buttong to control position and movement. Anti-rotation designs prevents swivels f...
9. Uncle Mike's 115 RGS Sling Swivel Wood Screw Set, One Each 1/2-Inch and 3/4-Inch Screws, Black, Model:25200
- Fits virtually every woodstocked bolt action rifle made
- Accepts all Uncle Mike brand Super Swivels
- A supperior swivel
- White Spacers Included
- Installation instructions included
- Magnum Band 115 RGS screw set
- Includes one each of 1/2 inch wood screw, fore-end base, and 3/4 inch rear wood screw base with white spacers only
- Accommodates most slings with quick-release swivels
- Two white spacers
- Blued finish
Features:
Specs:
Color | Black |
Height | 5.5 Inches |
Length | 1 Inches |
Weight | 1 ounces |
Width | 3.12 Inches |
Size | One Size |
Number of items | 1 |
10. Xage QD Sling Swivel Mount - with Base Rail Mounted Push Button (Sling Attachment for Picatinny/Weaver)
- ★Alloy reinforced Picatinny / Weaver mounting base provides rock solid sling attachment point, this QD sling swivel mount perfectly fits 1 1/4inch slings
- ★This QD sling swivel mount is made of high-tensile aluminum alloy, ensure maximum durability under heavy use
- ★Easy to use this QD sling swivel mount, simply push button to quickly detach and attach sling, a very good 2 point traditional sling
- ★Swivel mount design allows for freedom of movement and quick transitions between carry methods
- ★Any questions about our QD Sling Swivel Mount, just let us know, we'll help you solve it as fast as we could
Features:
Specs:
Color | Black |
11. TXTactical M-LOK Sling Attachment Adapter, M-LOK Sling Swivel Mount
Minimum design, the smallest steel sling mount on the marketPrecision casting from stainless steel with QPQ surface processing, extra durable, we provide lifetime warrantyLow profile, mounts to any M-LOK slotsBeveled edges and round corner design reduce snaggingAll installation hardware are included
Specs:
Weight | 0.07 Pounds |
12. Tough Tactical Tools Keymod Standard QD Sling Swivel Adapter Rail Mount
Lightweight,low profile design, mounts to all Keymod systemsPrecision casting from stainless steel, never get rusted even the black finish is worn outQPQ surface processing improve surface hardness and anti-corrosionBeveled edges reduce snagging, large loop accepts any sling hooksIncludes Keymod nut...
Specs:
Color | keymod |
13. El Dorado Armory Sling Swivel QD - Quick Release Heavy Duty Steel 1.25" Sling Swivel Perfect for Rifle Slings
HEAVY DUTY STEELPUSH BUTTON QUICK RELEASEACCEPTS UP TO 1.25" SLINGSWORKS WITH ALL 3/8" QD SOCKETS
14. LONJN 2 Point Sling Mount Adapter for Keymod System
Attaches to Keymod System, comes with 2 pair of keymod nuts and screws set.Push button QD sling swivel fits 1.25 inch webbing or paracord gun sling application.Material: CNC AluminumWeight: 40 g
15. JIALITTE Sling Swivel Mount QD Heavy Duty Quick Detachable (1.25" Sling Swivel - Matte Sand)
Heavy-duty push button QD sling swivel with 1.25" loopMade from High Strength SteelAccepts up to 1.25" SlingsPush Button Quick ReleaseThrough salt spray test. Manganese phosphate surface treatment, (with Anti-Corrosive coating)
Specs:
Color | Black |
Height | 1.3 Inches |
Length | 1.6 Inches |
Width | 0.6 Inches |
Size | 1.25" |
16. BLACKHAWK Swivel Stud Picatinny Rail Adapter
- Contains side swivel stud for continued use of sling
- Mounts to rifle’s existing swivel stud
- Provides a Picatinny rail section for rail-mounted accessories
- Constructed of rugged 6061 T6 aluminum w/Type-III hard-coat anodized finish
- Contains side swivel stud for continued use of sling
Features:
Specs:
Color | Black |
Height | 0 inches |
Length | 0 inches |
Weight | 1.25 Pounds |
Width | 0 inches |
Release date | March 2011 |
Size | Medium/6.5" |
Number of items | 1 |
17. Braudel Quick Detach Rifle Short Gun Sling Swivels, 1.25 Inch and 1 Inch Loop Tri-Lock Swivels for Hunting
- ➤PREMIUM MATERIAL - Made from premium steel,extra-strength injection molded belt loop; All-steel construction (no plastic) and premium finish; Heavy duty and no fade.
- ➤SAFE LOCKING & SILENT OPERATION- Three-lock system for optimum security against accidental opening, you can use them without worries.The close Machining tolerances provide flawless fit and silent operation with no squeak or rattle.
- ➤QUICK DETACH - Detach quickly, yet provide positive locking for safety. Swivel Lock spring-loaded plunger and a knurled, threaded sleeve eliminates accidental opening of the swivel.
- ➤WIDELY USE - Sling swivel with 1.25 inch loop, fits Slings up to 1.25 inch wide.
- ➤EASY TO INSTALL - Turning the swivel lock and pushing out on the knob releases the locking latch to pivot for attachment and detach.
Features:
Specs:
Color | A-1.25 inch loop |
Size | 1.25 inch |
18. UTG Detachable Swivel with Picatinny Mounting Base
- Regular detachable swivel for sling mounting with Picatinny mounting base
- Precision aircraft aluminum base with black anodizing
- Solid steel 1.25-inch loop for convenient sling attachment
- Tool free ergonomic thumb nut with retention design
- Fits any Picatinny/Weaver rail
Features:
Specs:
Color | Black |
Height | 1 Inches |
Length | 2 Inches |
Weight | 0.09 Pounds |
Width | 1 Inches |
Release date | June 2010 |
Size | Fits: Any Picatinny/Weaver Rail |
19. Uncle Mike's Quick Detach Rem 870 External Ratchet Cap Set Sling Swivels (Blued, 1-Inch)
- 3/4" wood screw buttstock swivel base and two super swivels
Features:
Specs:
Color | Blued |
Height | 6 Inches |
Length | 3 Inches |
Weight | 0.2 Pounds |
Width | 1.5 Inches |
Release date | February 2010 |
Size | 12 Gauge |
Number of items | 1 |
20. UTG PRO M-LOK(R) Standard QD Sling Swivel Adaptor
Country Of Origin : United StatesThe Package Height Of The Product Is 3 InchesThe Package Length Of The Product Is 6 InchesThe Package Width Of The Product Is 5 InchesIncluded Components: Assembly Tool
Specs:
Height | 1 Inches |
Length | 4 Inches |
Weight | 0.02866009406 Pounds |
Width | 3 Inches |
Number of items | 1 |
🎓 Reddit experts on gun swivels
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where gun swivels are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I'm sorry for your loss. The fact that your relative gave you those guns speaks to how generous of a person they were. What you have is a very solid base for a collection, and several guns that not only have been greatly increasing in value of the last few years, but stand to increase further in the future.
For a 22lr to practice with, get a Ruger 10/22. You'll have to wait a bit to get a good price on one, but 3-4 times a year a basic wood stock model will go on sale for about $200. Check /r/gundeals regularly, as well as this site, which used to be slickguns, but is apparently now renamed. For ammo, gunbot.net can help you find good prices on ammo, especially if you want to order in quantity. Put some Tech Sights on it, and get a 1,24" cotton GI Sling and Uncle Mikes 1.25" QD swivels (note that you can find better prices on those if you look around.) and you'll be set up to learn to shoot most of the rifles you have there very well.
Check the FAQ. Sign up for an Appleseed Project shoot and spend a weekend learning sling supported shooting. Have fun, be safe, and welcome to the community!
Totally agree, wish they had come with the stocks like that from the factory. Laminate stocks are similar to regular walnut/hardwood stocks (just thin layers appoxied/resined together forming an overall stronger bond and stock) I installed mine fairly easily just make sure your pre-drill your holes correctly and measure twice.
There are a lot of resources on youtube
Find the one that best suits you
Its all totally doable yourself but if you feel uncomfortable you could always have a gunsmith do it (but if I could do it myself without messing anything up you should be able to as well) If your rifle has a barrel band (I dont believe your model does) they make adapters to attach to it so you wouldn't have to drill the fore-end. Uncle Mike's are great products and thats what I used but there are other good brands, make and models as well, hard to go wrong with swivel studs. Also if you drill in the forward stud it would give you the option to use a swivel stud bipod
Good luck and enjoy the awesome rifle!
This is the swivel set you need. It has a stud that go into the barrel band in front, or use a screw-in one on the stock. You will need to file the plastic on the barrel band down a bit to get it to tighten down right. The rear one will just be the screw-in one.
As Mr. fufu said below, it's not hard to do and basic drill and file sets are always handy to have around, or it should be a pretty easy job for any gunsmith.
Today was day 1 of my first Appleseed and I'm using a TakeDown. Other than the swivels being a little more work to install it works just fine. I would suggest against the Magpul specifically for Appleseed. The QD points are on the side which will make the gun tilt when you use the sling for support, and the cheek weld can be weird for how they teach it. In general I love that stock, just not for this.
I'd say a sling mount would work best. Depending on where you want to put it and what mounting style you're using:
low profile m-lok sling mount
Low profile picatinny mount
offset picatiny mount. I think this would work best. Sort of like in this picture
low profile keymod mount
I have the Saber Carbine and it's a beast. I sounds really solid when shooting, you know, like, some guns kind of have a wheezing whistling sound when you fire them; the Avalon doesn't have any of that. Great ROF on full auto with a 11.1v lipo. FPS is solid (I've never chrono'd mine, but there are youtube reviews where you can see it's FPS. It has a solid, hefty weight to it. Buffer tube fits my 11.1v 1300mah stick lipos no problem. Like, /u/zxj4k3xz said the stock it a little wobbly and the right side selector is a little loose/ has a slight wobble, but neither of those things affect the performance of the rifle. A little tape on the buffer tube will fix the stock wobble. I liked that the stock stock (heh) has a slot to attach a sling and the hand guard has a DQ sling mount, all you need is one of these
USGI sling can be found here.
If you choose to buy elsewhere, be sure to buy cotton, not nylon. Nylon has a tendency to slip, especially in the loop configuration you'll learn at Appleseed.
You'll also need sling swivels and sling studs. You can get them as a set here.
Tip for installing the studs on your synthetic stock: Start with a small drill bit about 1/2 half the size of the screw on the stud. Pre-drill holes in the stock. Insert a nail through the sling stud and twist it into the stock until the holes are perpendicular to the bore.
You're all set. Good luck and happy shooting.
Standard Uncle Mikes sling studs will fit just fine on the synthetic stock, just make sure to drill a pilot hole. I also added epoxy to the threads to secure them and ensure they didn't rotate. No need to get the machine screw set unless you really want to.
As far as mounting the front stud is concerned, it should be fine mounted just before (i.e. trigger side, not muzzle side) the lasermax mount (based on Googled pics). Thats approximately where mine is ad you dont wat it too far forward anyway. Mine is mounted about an inch before the barrel band and is probably still and inch too far out for me and I'm 6'2.
I shot an Appleseed last weekend with my synthetic stocked 10/22 stainless with these studs, swivels and GI sling and had no issues (other than the weather).
http://www.amazon.com/Uncle-Mikes-Swivel-2-Inch-4-Inch/dp/B002E6T1NU
its not a shame. it is a rip off. magpul sells you an expensive stock and then says... ohh... want to mount a sling to it? here, send us another $30.
screw them. i went and bought these:
https://smile.amazon.com/gp/product/B01HJL094O/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
which work perfectly great. didnt come with mounting screws, but they were easy enough to pick up at the hardware store.
I recommend a 2 point sling with quick adjustment. such as the regular vtack sling. I advise agaist the padded sling or wide sling as it is bulky which is what you dont't want. If you don't already have a front sling attachment point you will need one that either attaches to your picattiny rail or mlok/keymod depending on how your foreend is configured. Sinceyour stock is setup for ball detent QD makes sense to do the front in the same.
qd sling adapter for rear stock
picatinny 45 degree QD sling point with D attachment
Mlock QD sling point with QD atchment.
keymod sling point with QD
You do not want a single point sling as it will swing freely when you run and beat up you knees, a 2 point is versitile and can be used to cinch the gun tight to chest or back when running, wrapped around the support forearm for shooting stability, or if looped over the right shoulder falls hown over left hip for pistol transitions.
​
I am sure you, like most of us, have a more mechanically inclined friend who is also into firearms. I understand your trepidation making modifications. You can get a part which attaches to the barrel band on the front end so you don't have to drill there. Here is a kit.
Keep watching gunbot for .22LR ammo. It comes up from time to time. You have to jump on it when you see it for reasonable prices. ($0.30 or more per round is certainly not reasonable!) I would seriously consider placing an order with CMP and being happy when it arrived 6-12 months later since their prices are reasonable if you don't have anything other than that one brick.
The TSA annoys me even more than various States carry issues and restrictions! On top of that I actually like driving. I have traveled as far as a 9 hour drive to an Appleseed but going west which would be about the drive time to Connecticut. One of these days I will make it up that way.
I really like these as a budget alternative to the VTAC quick-adjust sling. $20 all day long, great construction (tubular nylon instead of flat straps), and if you don't want to use the quick-adjust loop, you don't have to.
Add these if you have standard swivel studs or these if you have QD mounts - both are under $10.
You'll want a sling mount more like this: http://www.amazon.com/UTG-Detachable-Swivel-Picatinny-Mounting/dp/B003TWZHQ8/ref=pd_sim_sbs_misc_5 or one of the ones at the link provided by Reusable Hero. The RSA is for a different type of sling than the the USGI web sling.
Well, for sling and swivels, you can get the uncle mike's kit to replace the barrel take down knob to have a sling mount:
http://www.amazon.com/Uncle-Mikes-Detachable-Remington-12-Gauge/dp/B0002IOAQU
as for mounting it to the barrel, probably something like this would work. Might want to add some lock tight in there to ensure it stays where it is.
Yep, I'm holding out till someone comes up with an aftermarket option... Hopefully.
That or I might try to attach some swivel sling mounts like these
https://www.amazon.com/dp/B01LXM86FJ/ref=cm_sw_r_cp_apa_00JJAbZ5PVSWR
Yeah those QD swivels are meant for a different sort mounting socket. You could buy other mounts and adapters for the stock and barrel to use them, or get swivels like this,
and loop through a sling like this.
[Additionally] As for a forward grip, look for one made for the 1913 Picatinny type rail. There’s literally hundreds...
Thanks, It's a bit of a combination of 3 things, https://www.amazon.ca/BUSHNELL-14612-Uncle-Detach-1-Inch/dp/B000H6NJ7I/ref=sr_1_1?ie=UTF8&qid=1474408207&sr=8-1&keywords=uncle+mike+10%2F22
[to fit the m1 garand sling] (https://www.amazon.ca/Uncle-Mikes-Sling-Swivel-1-25-in/dp/B01JCSQ5FY/ref=sr_1_3?ie=UTF8&qid=1474408305&sr=8-3&keywords=uncle+mike+1.25%22)
and the bipod adapter from this
lol i wasn't sure people would be that interested since i didn't do anything unique or exciting with it.
Parts list right now:
Stock KM4 SR7
Mock PEQ (https://www.amazon.com/gp/product/B06X6M3Q1F/ref=ppx_yo_dt_b_asin_title_o03__o00_s00?ie=UTF8&psc=1)
11.1v 2600mah titan power Li-On
UTG 3X Magnifier (https://www.amazon.com/gp/product/B00S2FWRGK/ref=oh_aui_search_asin_title?ie=UTF8&psc=1)
EoTech Clone (https://ebay.us/gl3EGS)
Mock Silencer with flash hider (https://www.airsoftgi.com/product/5KU-SOCOM556MG-6-5-QD-Airsoft-Mock-Suppressor-w-CCW-Flash-Hider-Black-Type-A-33737/)
QD Pictinny rail attachment (https://www.amazon.com/gp/product/B01MQEA9CR/ref=oh_aui_search_asin_title?ie=UTF8&psc=1)
Nylon sling adapter for stock (https://www.amazon.com/gp/product/B075QB4Z1Z/ref=oh_aui_search_asin_title?ie=UTF8&psc=1)
Front Grip (https://www.evike.com/products/27228/)
​
Buy something like this: https://www.amazon.com/gp/product/B01BNLQQBQ/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
And something like this: https://www.amazon.com/gp/product/B0002IOANI/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
And follow this guide: https://www.youtube.com/watch?v=3vqOzfSex94
You will not regret having sling studs on your rifle. I installed 3 studs on each of my carbines, forend left (sling), forend bottom (bipod), buttstock top left (sling). The tri-lock sling swivels are easy enough to take off for hasty sling. The slings I bought came with a clip on the buttstock end, but it was much too loud for hunting.
If you've taken care of the above, you should find a local Appleseed shoot and become an excellent marksman.
good job, also looks like you could use these...lol
https://www.amazon.com/dp/B00162JLG0/ref=sxts_kp_lp_3?pf_rd_m=ATVPDKIKX0DER&pf_rd_p=8778bc68-27e7-403f-8460-de48b6e788fb&pd_rd_wg=yq8D1&pf_rd_r=V4M3DY8QQW5GRXT9HJMY&pf_rd_s=desktop-sx-top-slot&pf_rd_t=301&pd_rd_i=B00162JLG0&pd_rd_w=hUgJf&pf_rd_i=sling+swivel&pd_rd_r=b5a6a214-4e4c-4d3e-aee6-fdb79d0ac9dd&ie=UTF8&qid=1540066042&sr=3
Thank you! I was thinking i had to get something like this and then glue it in.
https://www.amazon.ca/gp/aw/d/B01HJL094O/ref=sspa_mw_detail_2?ie=UTF8&psc=1
There is so much good shit on this sub, I rarely have to ask questions as a noob.
Although I will say I bought a 10/22 earlier this week and it would have been nice to know this: to mount a sling, you need to buy some of these, you'll also need a drill, 7/32" bit, 5/32" bit, and ideally a vise to hold the gun while drilling. Takes 5 mins, but woulda been nice to know.
Also the often referenced USGI sling was hard to come by for me, my army surplus store didn't even have anything which blew my mind. You'll probably have to get that on Amazon or similar too. The slings at most places are just for carrying as far as I can tell.
Well the sling will come with qd points. A two point sling will have two qd mounts. The stock has one qd, and then the little mlok to qd. So if u buy this and mount it on an mlok slot on the handrail, then buy a sling that says it is a qd (quick disconnect) sling it will come with the mounts. Like this sling is a 2 point so it comes with two qd points. And then this is the magpul afg .
So an amp that is 50W rms is the most I would need? they're just going to be hanging above my desk with These or sitting on one of those foam isolation bricks.
Also because they are car speakers I'm fairly certain that there is more "open" space in the cavity of a car door than regular desk speaker. cause i remember when the mythbusters made an armoured car by placing Phone Books in the door cavity so should i cut a hole in the back to save on space? or should i just make it a bigger box?
There are a few variations on products like this one, not saying this is the best, but it gives you a starting point.
Here are a few options that should fit the M-LOK slots at the front end of the rifle depending on what type of sling you are using:
QD
USGI
Standard Swivel (sold here as a bipod mount, but it should still allow sling attachement)
If you have no qd attachment you’d need something like this
I put one of these on my Ruger American Predator with a BT10
https://www.amazon.com/BLACKHAWK-Swivel-Stud-Picatinny-Adapter/dp/B004T14ZZW
It works fine. Hasn’t come loose.
GG&G and ACCUTac make something similar too
Edit: you probably want something like BT17 1913 Rail.
Uncle Mike's Non Tri-Lock Sling Swivels (Blued, 1-Inch Loop) https://www.amazon.com/dp/B00162JLG0/ref=cm_sw_r_cp_apa_i_pvZzCbJEFS95R
Sling uses these swivels.
Looking for a QD that accepts these swivels.
Just make sure it is cotton, not nylon.
This type of sling swivel (because you told us your gun has qd attachment points). Braudel Sling Swivel Mount Qd Quick Detach/Release 1.25",Heavy Duty Push Button Swivels (2X QD Sling Swivels) https://www.amazon.com/dp/B01MXYWFE4/ref=cm_sw_r_cp_api_i_YUkDCbSMRXNM8
Confused. So do I need a mounting system like this and the swivels?
https://www.amazon.com/JIALITTE-M-lok-Swivel-Adapter-Attachment/dp/B0778BMZWX/ref=pd_bxgy_200_2/140-4844242-0583461?_encoding=UTF8&pd_rd_i=B0778BMZWX&pd_rd_r=05d89946-3372-11e9-aa96-e74d7a705039&pd_rd_w=yxiGK&pd_rd_wg=EMExo&pf_rd_p=6725dbd6-9917-451d-beba-16af7874e407&pf_rd_r=SXCMB3SJ480M2J6Q494Q&psc=1&refRID=SXCMB3SJ480M2J6Q494Q
You can absolutely put a sling on it.
https://www.amazon.com/gp/aw/d/B000H6NJ7I/ref=mp_s_a_1_7?ie=UTF8&qid=1475203288&sr=8-7&pi=AC_SX236_SY340_QL65&keywords=sling+mounts&dpPl=1&dpID=41RP16XCdYL&ref=plSrch
Just grab that (or find a kit with 1 1/4" loops) and follow the directions in the package. You'll just need a drill and some epoxy.
Don't worry, you're fine.
These studs worked great for my 10/22. No problems drilling into my wood stock.
I want to do an Appleseed event and I've got a 10/22. Most of the process of turning it into a LTR is straight-forward but I'm getting stumped on the swivel studs for a USGI sling.
Can someone tell me exactly which Uncle Mike's product to get that will appropriately address this? I am told that I need 1 1/4" sling mounts, not 1".
EDIT: Ordered these based on reviews: http://www.amazon.com/Uncle-Mikes-QD-115-RGS/dp/B0009TTROW
https://www.amazon.com/dp/B01MXYWFE4
If you've got sling mounts on your stock, you can get everything else you need from the Appleseed store -
Sling, Swivel set, Tech Sights and Adjustment tool.
I also had to install the swivel mount screw in my stock.
What kind of sling do you have? On mine it has little clips that attach to the QD mount. There's two pieces you would need:
https://www.magpul.com/products/m-lok-qd-sling-mount
https://www.amazon.com/UTG-Heavy-Button-Sling-Swivel/dp/B003TWXA2Q
Then hook your sling onto the sling swivel.
Here's one with both pieces: https://www.amazon.com/JIALITTE-M-lok-Swivel-Adapter-Attachment/dp/B0778BMZWX/ref=sr_1_6?s=sporting-goods&ie=UTF8&qid=1517951486&sr=1-6&keywords=mlok+qd+sling
The swivel is mounted on a stud in the stock. I bought these and installed them.
http://www.amazon.com/Uncle-Mikes-Swivel-2-Inch-4-Inch/dp/B002E6T1NU
http://www.amazon.com/Uncle-Mikes-Detachable-Carbines-Swivels/dp/B000H6NJ7I
https://www.amazon.com/gp/aw/d/B018ZS5A0S/ref=mp_s_a_1_16?ie=UTF8&qid=1523352601&sr=8-16&pi=AC_SX236_SY340_QL65&keywords=sling+mount&dpPl=1&dpID=41mat8NN%2B-L&ref=plSrch
Buy a couple of those and drop a bolt/screw through the top into the grip.
Recently (this Saturday) did some work to convert mine to an LTR. Still waiting on the sling mounts, but here here's mine: http://imgur.com/a/34ePZ
For the curious, here's all of the modifications:
I can't wait to get out and put some holes in paper with it now. With the new bolt release and target hammer, dry-firing feels so amazing compared to stock parts.
Here's my setup. Love it all. Sorry for the lack of formatting, I'm on my phone.
NCStar 3-9x 40mm scope
http://www.amazon.com/gp/aw/d/B000FHBQWO/ref=redir_mdp_mobile
Uncle Mike's swivel
http://www.amazon.com/gp/aw/d/B000H6NJ7I/ref=mp_s_a_1_4?qid=1368464932&sr=8-4&pi=SL75
Eagle 30rd banana mag
http://www.slickguns.com/product/ruger-1022-22lr-30rd-banana-mag-new-eagle-799
Forgot what kind of sling I got. It's nothing fancy. The eagle magazine had some weird plastic bit on it to "assist" is removing the mag but it prevented it from fitting. One swift hit with a large rock took it right off though.
Also avoid Remington golden bullets. I say it all the time but they are crap. I had jams every 5-10 rounds. I'm currently using federal's bulk ammo and haven't had a single bad round.
Parts:
Tom's Tactical Buffer Tube Assembly
Paint is a combination of 3 different Rust-Oleum Camouflage colors
I have an MRO that should be here in a few days for my optic, I'm planning on switching out the J-comp with a Wilson combat 3 prong flash hider. I might eventually switch out the handguard for a MI drop in rail. I would also like to switch out the Moe VG with something shorter if anyone has any suggestions.