Reddit mentions: The best hardware plugs
We found 26 Reddit comments discussing the best hardware plugs. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 20 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Leviton 47615-NYL Push-Lock Pins for Structured Media Centers, Bag Of 20
- Push-lock pins for structured media centers
- Bag of 20
- Replacement Kit
- Color Black
- Part of Leviton's award winning residential system
Features:
Specs:
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Weight | 0.01 Pounds |
Width | 0 Inches |
2. 50 X-TRA PLUGS SEALS 100% SELF VULCANIZING TUBELESS TIRE REPAIR PLUG
- TIRE REPAIR PLUG
- TIRE REPAIR TOOL
Features:
Specs:
Color | Brown |
Height | 3 Inches |
Length | 5 Inches |
Width | 3 Inches |
3. 125pc Rubber Grommet & Plug Assortment - Includes Solid Plugs - Automotive, Airplane, Marine Applications
- Generous assortment of essential hardware items in convenient re-sealable organizer case
- Includes through-hole grommets in 11 sizes and 7 sizes solid rubber plugs (see description for list)
- Grommets protect electrical wiring, fuel, water & hydraulic lines when passed through metal walls
- Rubber plugs seal holes, add finished look to your application; all oil-resistant Nitrile rubber
- Outstanding value - 125 quality hardware items for price of half-dozen in hardware store!
Features:
4. 0.5 - 2.55mm 0.02 - 0.1" Spark Plug Gap Tool
- Solid alloy steel
- Metric (0.5 - 2.55 mm) and imperial (0.02 - 0.1")
- Flanged hole allows adjustment of side wire without damaging centre element
Features:
Specs:
Height | 0.04724409444 Inches |
Length | 0.02755905509 Inches |
Number of items | 1 |
Release date | April 2013 |
Size | 1 - pack |
Weight | 5.070632026E-5 Pounds |
Width | 0.01968503935 Inches |
5. Paint Grade Plugs
- Made from quality doweling for solid joining
- Cut to match the pocket's angle for minimal sanding
- Plugs blend with wood even in high-vis applications
Features:
Specs:
Color | Paint Grade Plugs |
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.15 Pounds |
Width | 0 Inches |
6. Watts PEX LFP-580 Test Plug 1/2-Inch Barb Low-Lead, Brass
- The product is manufactured in China
- The product is highly durable and easy to use
- Easy installation and easy handling
- Low Lead 1/2inch Barb Brass Pex Plug
- No soldering, no threading, and no waiting
- Solid, leak-proof connection completed in a matter of seconds
- Listed by the NSF International to NSF Standards 14 and 61 for use in potable water systems
- Low lead brass is not more than a weighted average of 0.25% lead when used with respect to the wetted surfaces of pipes and pipe and plumbing fittings and fixtures
Features:
Specs:
Color | Copper |
Height | 4 Inches |
Length | 3 Inches |
Number of items | 1 |
Weight | 0.05 Pounds |
Width | 1.5 Inches |
7. Jones Stephens Corporation T31002 Economy 2" Test Plug, Small,
Molded rubber gasketGalvanized steel flangesFits cast iron and plastic pipe
Specs:
Height | 3 Inches |
Length | 2 Inches |
Number of items | 1 |
Size | Small |
Weight | 0.208 Pounds |
Width | 2 Inches |
8. Sioux Chief Test Plug Test Titan Mechanical Test Plug 4 "
- Made in United States
Features:
Specs:
Height | 3.3 Inches |
Length | 4.3 Inches |
Number of items | 1 |
Size | 4 In. |
Weight | 0.33 Pounds |
Width | 4.3 Inches |
9. Inside of Pipe Gripper Plug
Ideal for plumbing system tests.Easy to install with extra-large wing nut.Inside of pipe seals inside pipe as far as needed.Made with glass-reinforced ABS plastic.End-of-pipe seals only at the end of a pipe, preventing plug from falling into stack.
Specs:
Color | Yellow |
Height | 1 Inches |
Length | 4 Inches |
Number of items | 1 |
Size | 4 Inch |
Weight | 0.01 Pounds |
Width | 4 Inches |
10. Cherne 270138 Clean-Out Gripper Mechanical Test Plug, 3.78"-4.25"
Imported From TaiwanMECHANICAL COMPONENTSCommercial Brand: Cherne IndustriesNote: It is specifically designed to fit a 3-1/2 cleanout tee only. Not intended for straight pipe. It’s intended to screw into the cleanout Tee threads and expand when tightened to seal damaged threads. The usage range is...
Specs:
Color | Black |
Height | 5 Inches |
Length | 3 Inches |
Number of items | 1 |
Size | 3-1/2 in. |
Weight | 0.5 Pounds |
Width | 4.2 Inches |
11. Silverline Plug-In Mechanical Timer 24 hour
13 A rating controlling loads up to 3 kW Manual override switch Turns appliances on and off at required times Energy saving Complies with BS1363 13 A rating controlling loads up to 3 kW Manual override switch Turns appliances on and off at required times Energy saving Complies with BS1363
Specs:
Height | 0.09055118101 Inches |
Length | 0.04330708657 Inches |
Release date | October 2014 |
Size | 24 Hours |
Weight | 0.0003968320716 Pounds |
Width | 0.0787401574 Inches |
12. Safety RCD Adaptor
- IMAGE COMICS
Features:
Specs:
Height | 0.787401574 Inches |
Length | 0.787401574 Inches |
Weight | 0.4 Pounds |
Width | 0.787401574 Inches |
13. Silverline - 16A-13A Fly Lead Converter (16A Plug To 13A Socket
- Office Depot Brand Flip Chart, 27in x 34in, 1in Grid, 50 Sheets, White, Pack Of 2
Features:
Specs:
Height | 0.01968503935 Inches |
Length | 0.04330708657 Inches |
Weight | 0.0004375 Pounds |
Width | 0.0787401574 Inches |
14. 50 Piece Flush Mount Black Hole Plug Assortment for Auto Body and Sheet Metal
Plastic Plugs for use in Plugging holes
Specs:
Color | Black |
Height | 2 Inches |
Length | 2 Inches |
Size | 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2" |
Width | 2 Inches |
15. Canplas 193057S PVC DWV Cleanout Plug with Line, 6-Inch
- Self sealing plug , no gasket required
- Service temperature rated at (140F) 60C
- Normally used in the drainage portion of the DWV system only
- Model number: 193057S
Features:
Specs:
Height | 6.58 Inches |
Length | 1.9 Inches |
Number of items | 1 |
Width | 6.6 Inches |
17. Sioux Chief 878-40PK Recessed Plug 4 in
- Number in Package: 1piece
- End 1 Type: MPT
- Material: PVC
- 4" PVC polypropylene flush plug with threaded brass insert for easy cleanout cover installation
- Will not seize up on ABS or PVC
Features:
Specs:
Height | 4 Inches |
Length | 0.8 Inches |
Number of items | 1 |
Weight | 0.1 Pounds |
Width | 4 Inches |
18. Merriway Wood & Furniture Jointing Connector-White, BH03654 Modesty Block (Pack of 50)
50 x Modesty blocks for securing & binding where two boards meet at right anglesSuitable for joining pieces of chipboard together, Supporting drawers, etcMade from high quality white plasticDimensions: 36mm x 13mm x 13mmManufacturer: Bulk Hardware
Specs:
Color | White |
Height | 1.574803148 Inches |
Length | 6.299212592 Inches |
Release date | December 2015 |
Size | Pack of 50 |
Width | 4.1338582635 Inches |
19. Cherne 270188 Clean-Out 4 Mechanic Gripper Plug, 4""
- Natural rubber threaded O-ring for a positive seal
- Black color blends well with cast-iron pipe
- NPT-sized, including hard-to-find 3-1/2 in.
- Guaranteed to seal any damaged threads
- ABS glass-reinforced plastic for added strength
- Patented threaded O-ring ensures airtight seal
- Stainless steel hardware prevents corrosion
- Guaranteed to seal all damaged threads
- Made with glass-reinforced ABS plastic and natural rubber O-ring
Features:
Specs:
Color | Black |
Height | 2 Inches |
Length | 4 Inches |
Number of items | 1 |
Width | 4 Inches |
20. Canplas 193064 Flush Cleanout Plug, 4-Inch
Self sealing plug , no gasket requiredService temperature rated at (140F) 60CNormally used in the drainage portion of the DWV system onlyModel number: 193064
Specs:
Color | White |
Height | 4.45 Inches |
Length | 1.2 Inches |
Number of items | 1 |
Width | 4.45 Inches |
🎓 Reddit experts on hardware plugs
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where hardware plugs are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
You want self vulcanizing, I’ve had good experience with these. The rubber cement you are referring to is vulcanizing cement. You do not need it with these.
Used to use these in the shop until we found out they are not permitted by law - something something lawsuit. Never had a problem.
I Keep a strip of these, side cutters, and inexpensive install tool in each of my cars. Never had to use it on my stuff, but have bailed several friends and strangers out.
Box of these have been my garage and are still usable/haven’t dried out 5 years later.
You can double these up if you’re really in a pinch. Done sidewalls too, super sketchy but whatever it takes to get home.
50 X-TRA PLUGS SEALS 100% SELF VULCANIZING TUBELESS TIRE REPAIR PLUG https://www.amazon.com/dp/B00KBJT786/ref=cm_sw_r_cp_api_i_N06WCb8MTGQCV
or perhaps better yet, a rubber or silicone plug. it'd just be a tad easier to install, and it'd be removable. And with such a set, you'd be ready to go for future projects...
edit: this would also make a BOSS homemade glycerin cooling chamber. same design, but use a grommet in both the holes with equal inner diameter, put some stainless or glass tubing through, and have this connect to a bottom chamber with your downstem/bowl. this could be made from many items sourcable at your local thrift store. I've only seen glycerin chambers, though, not built or even owned one, so I can't be too much more specific. just a thought - seems like an interesting idea.
https://www.amazon.com/Leviton-47615-NYL-Push-Lock-Structured-Centers/dp/B0018DOBG2/ref=pd_sim_60_2?_encoding=UTF8&psc=1&refRID=HAKJKZK4EC0XSH0KE18M
It uses those little black stand off things. You insert it into the hole and then push down on the top and it locks down. If you by Leviton switches/patch panels, they usually come included with it (look at the Leviton switch I linked above, it's attached to the four ends of the switch). And for mounting gear in it that's not made by Leviton, they have special brackets that just hold a device in place and mount using Velcro straps. But save money and just mount it yourself using double sided tape/velcro straps etc...
Here is their universal bracket to mount non-leviton hardware:
https://www.amazon.com/Leviton-47612-UBK-Universal-Bracket-Structured/dp/B0018DKWGA/ref=pd_sim_60_1?_encoding=UTF8&psc=1&refRID=YRPJ81ADVX50J2PK7EAD
Here's another:
https://www.amazon.com/Leviton-47612-DBK-Plastic-Bracket-White/dp/B0007SN5E8/ref=pd_sim_60_4?_encoding=UTF8&psc=1&refRID=66BAHF93TW6PX8GR97RV
Motul is a brilliant oil.
As for spark plugs, always get the NGK specific to your bike and make sure its at the correct gap with a gap tool.
It's got charm to it. I Like it. Just an FYI to you,OP. You can buy plugs to cover up those pocket holes in case you run into an unavoidable situation where they have to be visible.
https://www.amazon.com/Kreg-P-PNT-Paint-Grade-Plugs/dp/B000GHLZ1K/ref=sr_1_1?keywords=pocket+hole+plugs&qid=1554726944&s=gateway&sr=8-1
Those look great. I hadn't seen them before. You shoot carbons?
I have tried a dozen things, but actually settled on using 1/2" PEX plugs, slipped over my woodies. Like this: https://www.amazon.com/Watts-LFP-580-2-Inch-Low-Lead-Brass/dp/B00529BAN0
First thing you'll want to do is test the tile shower pan for integrity. To do that you'll need a 2 inch rubber test ball plug or a 2 inch inside pipe expanding test plug. Examples:
https://www.amazon.com/Jones-Stephens-Corporation-T31002-Economy/dp/B000DZGLN2
https://www.amazon.com/Cherne-270024-Test-Ball-2-Inch-Plug/dp/B000VYNU7A
You'll use those to plug the shower drain completely water tight and then fill to the top of the shower curb. Let is sit like that for 24 hours. Check underneath for visible drips and wet spots. The water level should not drop. If it does, even if you don't see leaks, you almost certainly have one. If so there's nothing for it but to break out the tile and start over. Look on the John Bridge forums or the Tile Council of North America for a thorough run down on the correct way for tile shower pans to be constructed.
Hi I have a similar network enclosure box - how do you mount the cable box/switches/router?
I tried using screws through the holes but they weren’t secure enough to mount things and one even went thru the single layer of drywall I have on the other side.
I googled some Leviton push-pin locks for their brand of enclosures, and people using L brackets
https://www.amazon.com/Leviton-47615-NYL-Push-Lock-Structured-Centers/dp/B0018DOBG2/ref=pd_aw_lpo_60_bs_lp_img_1?_encoding=UTF8&psc=1&refRID=T07MQVFHHKY4KCJ98NWP
You can get size-adjusting plugs for cleanouts that aren't threaded or are otherwise damaged, like this. It's a little lumpy for placement in the middle of the floor, but will certainly seal.
Also, if you seal that hole and then experience problems in the shower upstairs, you definitely have a vent issue.
The modem and router are held in by one of these:
Leviton 47612-UBK Universal Shelf
These have a standoff/negative space behind them so thats where all the power wires for everything are coiled up. Once you have one of these, you can get some 3/4"x1/16" aluminum bar from Lowes/HD and cut it to length and transfer the spacing for the pushpin holes to it from one of the Leviton shelfs. Drill those out and put some of these in there:
Leviton Push-Lock Pins
I painted mine with white appliance enamel. You can put those wherever you need them and use some velcro cable wraps around both sides of them to secure the devices to the enclosure.
It looks like Leviton actually makes a version of these now:
Leviton Universal Bracket
...but for $23/pr you can do better/stronger if you go the thin aluminum bar route and make about 6/8 of them for about $10, including the Leviton push lock pins.
If so, it will be an easy fix. You'd remove the floor tile, and expose the drain. Here is a stopper that fits inside the pipe, leaving nothing exposed to step on:
https://www.amazon.com/Inside-of-Pipe-Gripper-Plug/dp/B00IG3W8SK
Just want to point out that you likely have a partial plug in your sanitary line, which is causing the water to come up because it cannot drain fast enough.
Why not just plug a normal light into something like this?
Something like this so it could be used later if need be.
A guy I was in a band with a few years ago got us each one of these breakers ‘just in case’. I’d stopped using it out of laziness, while there’s only one standard (240) in the UK your little tale just convinced me to put it back in my gigging bag.
I have the same cabinet. The backing has little holes in it. You use these little pushpin snap connectors. Each component has a little hole that lines up with the backing holes so you can pin them in.
https://www.amazon.com/Leviton-47615-NYL-Push-Lock-Structured-Centers/dp/B0018DOBG2/ref=sr_1_1?ie=UTF8&qid=1472745030&sr=8-1&keywords=leviton+pins
The smallest hook-up cable I'm aware of comprises of a short section of cable and a single plug: Amazon sell one, which I've used myself on several trips. It does the job, but be aware you can't use it during wet weather as the cable won't be long enough to reach into your tent.
The power if google
http://www.amazon.com/gp/aw/d/B0040D0LZW?pc_redir=1408856424&robot_redir=1
That is a cleanout plug for a drain line.
Hole plugs?
Non-mobile: this
^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble. ^WUT?
You just walk in and someone has plugged in one of these.
https://www.plumbingsupplynow.com/plumbing/drains/covers/4-1-4-white-finish-high-impact-plastic-cleanout-cover-plates-flat-design
https://www.plumbingsupplynow.com/plumbing/drains/covers/5-1-4-white-finish-high-impact-plastic-cleanout-cover-plates-bell-design
https://www.amazon.com/Sioux-Chief-Recessed-Plug-4/dp/B000JV9NQ2?ref_=fsclp_pl_dp_13
Could the below item help?
Bulk Hardware BH03654 Modesty Block Wood & Furniture Jointing Connector- White, Pack of 50 https://www.amazon.co.uk/dp/B019H1YAIA/ref=cm_sw_r_cp_apa_i_-nFYDbAP82G6A
You mean the threads in the pipe are bad? Easiest thing to do is get an expanding rubber plug, like so and so:
https://www.homedepot.com/p/Zurn-4-in-Cleanout-Plug-LC-4P/205974585
https://www.amazon.com/dp/B000R8IWVE/ref=asc_df_B000R8IWVE5249393
In the meantime you can just pour hot wax over the edge to seal it, or pack it with putty.
It looks kind of wet up to the walls there, you could have rotten wood.
I'm not sure what we're asking here.
You've got a "structured media panel" in the wall. I'm not sure what brand, but not Leviton, which is what I mostly install.
The holes in the back are for mounting stuff inside the box. A lot of times I'll just use zip ties, but a lot of components and blocks are designed to fit that spacing. Take a look at a coax block:
https://images-na.ssl-images-amazon.com/images/I/51G5eoEk8nL.jpg
Or here's a network switch that can mount into those holes:
https://images-na.ssl-images-amazon.com/images/I/71uZRsRV5VL._SL1500_.jpg
See the black prongs on the back? They snap into those holes in your panel.
In fact, you can buy just the plugs if you want and hang anything on them:
https://www.amazon.com/Leviton-47615-NYL-Push-Lock-Structured-Centers/dp/B0018DOBG2/
by code cleanouts have to be 4 inches above the ground.
Thats said, a lot of people cut them off. What I did to maintain code was to cut them off at ground level, put in a female hub on
https://www.homedepot.com/p/4-in-PVC-DWV-Hub-x-FIPT-Female-Adapter-C4803HD4/100677997
then installed a countersunk cleanout plug:
https://www.amazon.com/Canplas-193064-Flush-Cleanout-4-Inch/dp/B00PCSKSRU
I did however, keep the 4 inch risers, and put a male threaded adapter on the ground-side end of them, so if code inspectors ever come out to check i can put the code-appropriate risers on.