Reddit mentions: The best home storage hooks
We found 621 Reddit comments discussing the best home storage hooks. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 285 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Command Utility Hooks, 3 hooks, 6 strips, Indoor Use, Organize Damage-Free (17003-3ES)
- Includes 3 Large, white Command Utility Hooks and 6 Large Command Strips; 1 hook holds up to 5 pounds
- DAMAGE FREE ORGANIZATION Say goodbye to holes, marks, or sticky residue on your walls, doors, cabinets, or closets; Command Hooks by 3M are easy to use and help keep your walls looking beautiful
- No Tools Required Hang Clipboards, Brushes, Dog Leashes, Kitchen Utensils, and Accessories Where You Want Without Nails or a Hammer
- STRONG AND VERSATILE Command Utility Hooks hold strongly on a variety of indoor surfaces including painted walls, finished wood, glass, tile, metal, and other smooth surfaces
- REMOVES CLEANLY Reorganize when inspiration strikes; These wall hooks leave no sticky adhesive behind; Perfect to use inside cabinets and closets, in your college dorm, apartment, home, and office
Features:
Specs:
Color | White |
Height | 25 Inches |
Length | 100 Inches |
Number of items | 1 |
Size | 3 Hooks |
Weight | 0.04629707502 Pounds |
Width | 25 Inches |
2. Command Cord Clips, Small, Clear, 8-Clips (17302CLRES), Organize your dorm
Damage-Free HangingSize: SmallColor: ClearPackage Contents: 8 clips, 12 stripsHolds strongly and removes cleanlyEasy to apply and removeWorks on a variety of surfacesBlends in seamlessly with decorIdeal for extension cords
Specs:
Color | Clear |
Height | 6.75 Inches |
Length | 0.87 Inches |
Number of items | 1 |
Size | 8 Clips |
Weight | 0.024 Pounds |
Width | 3.88 Inches |
3. eLhook Stick-on Headphone Hanger Hooks, Damage Free, 2 Pack
Sticks strongly on almost any clean surface yet EASILY REMOVED WITH NO DAMAGE. 5 pound capacity. (Even the heaviest headphones weigh about 1 pound.)Each hook is mounted using two Scotch 3M DAMAGE FREE REMOVAL Adhesive strips which are included. 3M Command mounting strips have proven reliable in mill...
Specs:
Color | Black |
Height | 2.5 Inches |
Length | 2.5 Inches |
Size | 2 elhooks |
Weight | 0.03125 Pounds |
Width | 1.5 Inches |
4. Tornado 00520 Large J-Hook
Mount to drywall or a wall stud with the same fastener, Working Load Limit: 40 lbExtended length plate design distributes weight evenly for superior holding powerNotches on plate allow for easy leveling and alignment with other hooksRubber coated hook provides added visibility, safety and gripA spik...
Specs:
Color | Black/Orange |
Height | 7.25 Inches |
Length | 5 Inches |
Number of items | 1 |
Weight | 0.4 Pounds |
Width | 4.875 Inches |
5. Tornado 00510 Extended U-Hook
- Mount to drywall or a wall stud with the same fastener ; Capacity: 50 lb
- Extended length plate design distributes weight evenly for superior holding power
- Notches on plate allow for easy leveling and alignment with other hooks
- Rubber coated hook provides added visibility, safety and grip
- A spike on the back plate allows for quick positioning and easier mounting before fastening to wall
- Mount to drywall or a wall stud with the same fastener
- Extended length plate design distributes weight evenly for superior holding power
- Notches on plate allow for easy leveling and alignment with other hooks
- Rubber coated hook provides added visibility, safety and grip
- A spike on the back plate allows for quick positioning and easier mounting before fastening to wall
Features:
Specs:
Color | Orange |
Height | 7.25 Inches |
Length | 5 Inches |
Number of items | 1 |
Weight | 0.4 Pounds |
Width | 4.875 Inches |
6. Command Clear Mini Light Clips, 45 clips, 54 strips, Indoor Use
Damage free hangingColor: ClearHolds strongly and removes cleanlyEasy to apply and removeWorks on a variety of surfaces
Specs:
Color | Clear |
Height | 0.5 Inches |
Length | 0.75 Inches |
Number of items | 1 |
Release date | October 2021 |
Size | 45 Clips |
Weight | 0.09 Pounds |
Width | 0.25 Inches |
7. Tornado 00515 J-Hook
- Mount to drywall or a wall stud with the same fastener
- Extended length plate design distributes weight evenly for superior holding power
- Notches on plate allow for easy leveling and alignment with other hooks
- Rubber coated hook provides added visibility, safety, and grip
- A spike on the back plate allows for quick positioning and easier mounting before fastening to wall
- Max Capacity: up to 40 lbs (drywall/stud)
Features:
Specs:
Color | Orange |
Height | 6.625 Inches |
Length | 3 Inches |
Number of items | 1 |
Weight | 0.3 Pounds |
Width | 4.875 Inches |
8. DecoBros Over The Door 6 Hook Organizer Rack - Silver
- The Over the Door Hook Rack is perfect for anyone who needs more hanging space
- Features a flexible bracket that fits doors up to 1-3/4 inch thick. No hardware or screws needed
- Silver for 6 hooks
- Size 11-1/4-inch H by 17-inch W by 4-1/4-inch
- USPTO Patent USD724860
Features:
Specs:
Color | Silver |
Height | 11.5 Inches |
Length | 16.8 Inches |
Weight | 1.15 Pounds |
Width | 2.3 Inches |
9. Lehigh FSR13 Flip-Up Bike Storage Hanger, Grey
No mar vinyl cushions cover the sturdy 3/8" diameter arms to protect valuable equipment.Mounting Hardware Included.Designed to mount to a single wall stud.Easy installation.
Specs:
Color | Grey |
Height | 15.7 Inches |
Length | 2.6 Inches |
Number of items | 1 |
Weight | 1.48 Pounds |
Width | 12.4 Inches |
10. Command Mini Hooks Value Pack, White, 18-Hooks (17006-18ES), Organize and decorate your dorm
- INCLUDES – 18 white hooks, 24 small strips; 1 hook holds 0.5 lbs
- DAMAGE-FREE HANGING- Say goodbye to holes, marks, or sticky residue on your walls, doors, cabinets, or closets; Command Hooks by 3M are easy to use and help keep your walls looking beautiful
- NO TOOLS REQUIRED- Hang hats, calendars, keys, measuring spoons, cleaning tools, jewelry, and décor where you want indoors without nails or a hammer
- STRONG AND VERSATILE- Command Clear Hooks hold strongly on a variety of smooth indoor surfaces including painted walls, smooth ceilings, finished wood, glass, tile, and metal. Not recommended to place on or near windows
- REMOVES CLEANLY- Reorganize when inspiration strikes; These wall hooks leave no sticky adhesive behind; Perfect to use inside cabinets and closets, in your college dorm, apartment, home, and office
Features:
Specs:
Color | White |
Height | 1.34 Inches |
Length | 7.01 Inches |
Number of items | 1 |
Release date | September 2018 |
Size | 18 Hooks |
Weight | 0.04 Pounds |
Width | 3.7 Inches |
11. Peleg Design Key Pete, Strong Man Magnetic Key Holder, Key Petite Key Hook Key Magnet Key Organizer for Fridge Home Office, Black
- 🔑 NEVER LOSE YOUR KEYS AGAIN: Simply attach magnetic Pete to any metallic surface and he will happily hold your keys. Avoid wasting time and energy searching the house, Pete will make sure that your keys are always there when you need them.
- 🔑 STRONG MAGNET: He may be small (3.2 x 2.9 x 2.4 inches), but Pete can hold up to 30 keys! Whether its your house, car, gym or office keys, this sturdy magnet key holder has got you covered. Watch out for fake copies - this is the original design with the highest quality and magnet strength.
- 🔑 KEY-PING IT COOL: Key Pete comes in stylish black. Check out his equally strong sister, Key Petite who is available in vibrant pink and red. Fun, quirky and unique design, which will add a whimsical twist to any home.
- 🔑 THE PERFECT GIFT: Surprise your friends and family with this cute and functional keys organizer. A great and useful gift for any occasion.
- 🔑 OUR GUARANTEE: Peleg Design is committed to the best customer service. Our clients’ satisfaction is our priority, which is why we always promise a full refund if you don’t like our product. NO QUESTIONS ASKED. For every need – contact us!
Features:
Specs:
Color | Black |
Height | 3.149606296 Inches |
Length | 3.149606296 Inches |
Weight | 0.09 Pounds |
Width | 2.362204722 Inches |
12. Umbra, Espresso Magnetter – Magnetic Wall Mounted Key/Mail Entryway Organizer/Hanger, STORAGE
- HOLDS SEVERAL SETS OF KEYS: A strong, hidden magnetic strip along the lower half of Magnetter easily holds several sets of keys – even car keys with alarm controls
- 2-IN-1: Works as a keys, accessories and mail holder – Magnetter’s gracefully curved upper portion accommodates mail, glasses, tickets, or any other materials you don’t want to leave behind
- DECLUTTER YOUR LIVING SPACE: This sleek, subtle design will help you organize your living space, keeping essentials separated and in full view
- DESIGNED BY THEA YUZYK FOR UMBRA: This easy to install organizer comes with mounting hardware and measures 8 x 6 x 2 inches
- SATISFACTION OR YOUR MONEY BACK: Umbra is committed to the highest levels of quality and excellence and stand behind every product we make. We know you’re going to love your purchase but if you’re not completely thrilled for any reason (or even no reason at all), simply contact us within 30 days of receiving your order and we’ll happily resolve the matter or issue a full refund
Features:
Specs:
Color | Espresso |
Height | 2 Inches |
Length | 8 Inches |
Number of items | 1 |
Size | STORAGE |
Weight | 0.0016975594174 Pounds |
Width | 6 Inches |
13. Command Small Wire Hooks, 16 hooks, 24 strips, White, Easy to Open Packaging
Damage free hangingWeight capacity: 1/2 poundSize: SmallColor: WhitePackage contents: 16 hooks, 24 strips
Specs:
Color | Organize Damage-Free |
Height | 1.625 Inches |
Length | 0.75 Inches |
Number of items | 1 |
Size | 16 Hooks |
Width | 0.75 Inches |
14. Command Refill Strips, Medium, White, 9-Strips
- INCLUDES - 9 Indoor Small Replacement Strips
- RE-HANG HOOKS – Reorganize when inspiration strikes! Command Small Refill Strips make it easy to hang and rehang your Command indoor hooks, damage-free
- ORGANIZE DAMAGE-FREE - Say goodbye to holes, marks, or sticky residue on your walls, doors, cabinets, or closets; Command Hooks by 3M are easy to use and help keep your walls looking beautiful
- STRONG AND VERSATILE- Command indoor hooks hold strongly on a variety of surfaces including painted walls, finished wood, glass, tile, metal, and other smooth surfaces
- Not recommended for mounting or hanging frames - use specially designed Command Picture Hanging Strips or Hangers instead
Features:
Specs:
Color | White |
Height | 5.75 Inches |
Length | 0.32 Inches |
Number of items | 1 |
Size | 9 Refill Strips |
Weight | 0.0220462262 Pounds |
Width | 3.88 Inches |
15. Command Small Refill Strips, White, 64-Strips (GP022-64NA) - Easy to Open Packaging
Command Refill Strips make it easy to hang and rehang your Command Hooks, damage-free! For reuse of Command General Purpose and Decorative Small HooksHolds Strongly: holds 0.5 to 1 pound (may vary by product - check product package for weight capacity)Removes Cleanly: no holes, marks or sticky resid...
Specs:
Color | White |
Height | 11 Inches |
Length | 1 Inches |
Number of items | 64 |
Size | 64 Refill Strips |
Width | 8.5 Inches |
16. Command Large Utility Hooks, White, Ships In Own Container
- INCLUDES - 7 hooks, 12 large indoor strips; 1 hook holds 5 lbs
- DAMAGE-FREE ORGANIZATION- Say goodbye to holes, marks, or sticky residue on your walls, doors, cabinets, or closets; Command Hooks by 3M are easy to use and help keep your walls looking beautiful
- NO TOOLS REQUIRED- Hang clipboards, brushes, dog leashes, kitchen utensils, and accessories where you want without nails or a hammer
- STRONG AND VERSATILE- Command Utility Hooks hold strongly on a variety of indoor surfaces including painted walls, finished wood, glass, tile, metal, and other smooth surfaces
- REMOVES CLEANLY- Reorganize when inspiration strikes; These wall hooks leave no sticky adhesive behind; Perfect to use inside cabinets and closets, in your college dorm, apartment, home, and office
Features:
Specs:
Color | White |
Height | 3.91 Inches |
Length | 1.33 Inches |
Number of items | 1 |
Size | Large |
Weight | 0.24 Pounds |
Width | 1.23 Inches |
17. iDesign Bruschia Steel Wall Mount 8-Hook Storage Rack - 13" x 2.9" x 3.66", Brushed/Polished
- HANGING STORAGE RACK: Designed with four double hooks (eight hanging points total) to provide storage for a variety of household items
- VERSATILE STORAGE SOLUTION: Can be used in the hallway, entryway, closet, bathroom, bedroom, pantry, or any room in the home that you need additional organization
- EASY INSTALLATION: Simply mount it to any interior wall with included hardware for easy installation and set up
- MADE WITH DURABLE STEEL: Sturdy steel construction with dual-tone brushed and polished finish is made to last and stands up to every day use
- COMPACT SIZE: Measures 13" x 2.9" x 3.66" to add instant storage in compact spaces
Features:
Specs:
Color | Brushed Nickel and Chrome |
Height | 4 Inches |
Length | 3 Inches |
Number of items | 1 |
Size | 13" x 3" x 3.75" |
Weight | 0.6 Pounds |
Width | 13 Inches |
18. Glow in The Dark Pebbles Glowing Rocks Solar Stones【200 PCS】 for Fairy Garden Landscape Walkway Path Lawn Yard Flower Beds Potted Plant Aquarium Fish Tank Gravel Outdoor Decoration (Bamboo)
- Soft light mint green creme nail color
- From the China Glaze Up & Away Collection
- Gives long lasting manicures
- Quick drying on nails
Features:
19. Command Decorating Clips, White, 40-Clips (17026-40ES)
Damage-Free HangingColor: WhitePackage Contents: 40 clips, 48 stripsHolds strongly and removes cleanlyEasy to apply and removeWorks on a variety of surfaces
Specs:
Color | White |
Height | 6.75 Inches |
Length | 1.06 Inches |
Number of items | 1 |
Size | 40 Clips |
Weight | 0.0375 Pounds |
Width | 3.88 Inches |
20. Spectrum Diversified Wood Wall Hook Rack, 7 Peg, Bamboo
Hang and store your hats, coats, purses and moreEasily mounts to walls with included hardwareAll-natural wood construction3.75"L x 24"W X 1.75"H
Specs:
Color | Bamboo |
Height | 1.75 Inches |
Length | 3.75 Inches |
Number of items | 1 |
Release date | June 2011 |
Size | 7-Hook |
Weight | 0.755 Pounds |
Width | 24 Inches |
🎓 Reddit experts on home storage hooks
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where home storage hooks are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
First of all Kim Guzaman's Video Tutorials are indispensable. They helped me so much in the beginning. I agree with both /u/I_heart_DPP and /u/boyd121 that you should definitely work up a small swatch and start with that just to get the hang of the "simple" stitch. I then recommend making a smaller project like a scarf or dishtowels to get your tension down. You can use a regular crochet hook with a hair tie wrapped around the end as a "stopper" until you get the hang of it.
A few key points of Tunisian Crochet:
1.) Always try to start your project with the Tunisian Purl Foundation Stitch this will help alleviate the "curl" that can occur with Tunisian crochet.
2.) Use a hook at least 1 but more likely 2-3 times larger than the size recommended by the weight of the yarn you are using.
3.) The width of your project should not exceed 3 times the length of your hook. For example, if you want to make an afghan that is 3 feet wide your hook+cable needs to be at least 12 inches long.
For me, this technique is much faster. I made this Tunisian Watercolor Scarf in a couple of days. It's super fast once you get in the groove. :-D
Once you practice a bit and feel like you want to try a larger project (i.e. afghan) I recommend something like this simple (yet beautiful) Tweed Blanket as it incorporates a few techniques to challenge yourself and move beyond the simple stitch, including color changes, to keep things interesting.
I love my Denise Interchangeable Tunisian hooks. I bought a few supplemental cables from ebay for really large projects in 25", 40" and 60" lengths. They slide through the stitches like buttah' and the cables attach strongly and easily.
I hope this helps! Happy Hookin' :-D My inbox is always open if you have any questions.
EDIT: Formatting
I love stuff like this! I'm not an expert, but these are my ideas:
Pic 1 - Well it looks like there are a lot of books on the floor, and some space on the shelf. Throw away or donate the books/other stuff that you don't think you or the kid will ever read/use (or books/stuff that you haven't read/used in a long ass time that don't really mean anything to you anymore). Get a tiny safe for important papers, and get a manila or twin pocket folder for other papers. Put the folders on top of the safe. Put toys in the kid's room. Throw away those bags. If you have a hallway closet or a garage or something, put all the other stuff (coil springs box, guitar case, etc) in there. If not, just place it against the wall in as nice and neat a way as possible.
Pic 2 - Get a little net [like this] (http://ecx.images-amazon.com/images/I/51v8nyM7ejL._SY300_.jpg) for the stuffed animals and maybe something like this for the other toys.
Pic 3 - You could get a tiny little laundry or knick knack basket for the dog's toys when you're not using them. As for the tv and (PC?) Organize the cords and zip tie them. Get those Command hooks or something like this to hang up coats/jackets/bags by the front/back door. You can get a little round basket for chapstick/hand sanitizer/lighters. The keys might look nice one of these hooks or you can put it with the lighters, etc.
Pic 4 - Not really a big deal. You seem to be fine right there.
Pic 5 - Find something like this for all the stuff sitting on the island thing. Put it against the wall in the place that looks best. You can get something like this for the apples and other fruits/vegetables that you don't want to put in the fridge.
Pic 6 - Do you not have a closet? If so, put the laundry basket at the bottom of your closet if you don't want it sitting out. If not, you can get something like this.
If money is an issue, just try to do as much as you can and then deal with the rest by stacking nice and neatly.
I'm moving soon too! In a week from today, exactly. I'm moving off to an apartment for college. Because of this, I have an entire wishlist of household stuff that I'll need. It's the wishlist called "Stuff I Actually Need", which is full of cool and cheap household items someone will need when moving into their first place and also school supply stuff- just ignore the school supply stuff.
As for a specific item, you should get one of these shower curtains
Other notably awesome things I've found that you should get include:
And you're a pretty, pretty dame. I don't know what to link for myself. Surprise me with whatever you think is cool. Thanks for the contest and food luck with your new place!
"The past is of no consequence. It cannot be changed. The future is a blank slate." I like to keep this in mind, as another impatient individual. We really never know what's going to happen. Anything can change. Plan all you may, but all you really have is now. Enjoy it, before it goes.
As for brightening your day. Post some pictures around where you work, carry them with you. Remember why you're doing what you're doing. YOU are your own worst enemy. You are stronger than you can imagine. When you feel out of whack: Stop, breathe, think, and find something beautiful about the place your in. If that isn't possible, close your eyes for a few seconds and imagine where you want to be.
You can try to volunteer at a shelter for animals, a thrift store, soup kitchen. Go through your things and donate stuff. Find a homeless man/women/child, and ask them if there's anything you can do for them. I recently gave a homeless man that walked by my house a bag of cans to recycle, and some older blankets I don't use. He was more than grateful. Heck offer to buy them a meal, or make them a samich. Oddly enough, I've also let a homeless man use my shower. That was kind of weird, but... I felt he needed it, and I knew who he was from talking to a friend. Anything you can do to brighten someone elses day, will also brighten yours. By a LOOOONG shot.
Cleaning. I like to clean. Most people don't seem to, but I find it helps to relax, feel accomplished, and it takes my mind off of the impatience. It gets something done right then and there.
I could probably suggest more but this is getting long winded. >_>
I could use this.
Ahhhh these are my favorite things to encounter!!!!!! A few things I love as a stanky lady on playa (in case you care)
Another BIG one I would love to see -- why not also decorate a cool, small trash bin for people to put their wipes into? The wipes are not supposed to go into the potty hole, but time after time again I see them in there when I look into the hole. What I imagine is that someone didn't know, brought it into the porto, used it to wipe their poo-poo, & see the signs but are now like "well shit what do I do?" So maybe having a place for their wipes would help this!? It will be gross for you but just strap on those rubber gloves baby!
I'm assuming you are planning to come through every once and a while to check on your gift so maybe it can be a little daily :)
In terms of securing stuff, would it be kosher if you got a few of these bad boys and then tied the items to hang them?
​
I have no idea if this info is helpful but hope it is!! And hope I get to experience your porto gift!
Hey everyone. I figured I would share my new Mat Storage and Display thing.
​
So as many of you probably can attest, there are a lot of mats out there and storing them becomes an issue. I also wanted to show them off at the same time because... they look awesome.
​
So I came up with this solution
​
First, i highly recommend these mat tubes from Blick Art Supplies. They are cheap, fit a mat perfectly, have a shoulder strap. and are see through.
​
I then ordered two of these Coat Hangers from Amazon for $10 each. They fit the tube perfectly between the rungs and are slightly rounded so that the tube stays put. drilled these into the studs so that they were secure and BOOM. All in this cost me $85 including the mat tubes.
ok here we go:
I just moved and regret all the stuff i brought along! one thing that drives me crazy is I went from a large kitchen to a smaller one with less space...so these would be really useful!
.
I also love over the door hooks when bathrooms do not have enough towel rods. (they have other ones that are single hook or double hook if you need less).
.
And last but not least, i shall suggest /r/DIY a lot of the projects are bigger in nature but they have a lot of small ones too! might be good to search for something specific you need (like a garden? or dvd/game/cd holder)
.
I hope you find a home for all of your Little boxes on the hillside! And I am another day closer to going back home so I shall def enjoy my Friday!! :)
I hope I'm doing this right...
1 = This shelter will protect me from naughty UV rays and subsequent burns while I'm studying transfiguration on the beach.
2 = This figurine. I need it with me at school so I can remember where I came from and who I'm becoming a totally awesome witch for. :)
3 = My babes will appreciate these blocks to keep them occupied building their own Toyland while I'm at class.
4 = I need to hurry up and read this before I hear spoilers, otherwise I may be forced to curse the spoiler-giver with boils. Whiiiich sounds like a good way to get expelled.
5 = I would love [this phone protector](http://www.amazon.com/dp/B00AW2QT8I/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=14W2GPMO5NQZO&coliid=I69DBBI4I4X90&psc=1
) so I don't end up like my brother-in-law, who once forgot that his phone was in the pocket of his swimming trunks until he was in mid-air above the pool, about to cannonball. Who knows that kind of unexpected things could happen at school, what with nervous wand-wielders and magical creatures running about? I'd better protect my electronics from harm. Assuming, of course, that RAoAS3M is not like Hogwarts and that electricity will work?
Bonus = Here are some hooks I need for my dormitory at school. Gotta keep things tidy!
Thanks for the fun activity! Mischief Managed.
Easy way to brighten up student rooms:
ProTip: I did this at Uni and fucking loved it, but my friends did tend to want to customise my wall-hangings. A couple of pen-marks seeped through the fabric onto the walls. If you fancy writing onthe walls, or think people might, hang cheap wallpaper lining paper (or even a layer or two of newspaper, nything really!) behind the fabric, just in case.
Another tip: get yourself on Freecycle - I furnished my entire house from it, including all appliances, for nothing more than cost of picking stuff up.
Here's some ideas:
I would focus on decorating by area to make the rest of your home feel festive, if you can't focus around a fireplace like you seem to have in the past.
​
WOOT WOOT! Congratulations! School was insane for me... I'm glad you made it out alive. What is your degree in?
Here are a couple things that might liven up your desk:
Note: These are just a hair over $10, but totally worth it!
Surprise me!
What I love about myself is my braaain :) And people like that I have a bubbly personality, so I like that too!
This hook door hanger thing would make me happy because it's useful!
Its surprising some of the things you find out that you need after you move in.
AND A FISHY TO BE YOUR FRIEND!
These are just a few things. I just graduated college and I will never again underestimate the necessity of duct tape and a plunger :P
EDIT: Would you like a falafel with that?
EDIT: Typo
I don't have a picture right now but I did my whole wall with these, a leveler, and a ruler. 2 hooks for the bottom of the record and one hook upside down to hold the top. Would cost you about $26 to do a big wall. It's a perfect fit and the LPs slide in and out from the hooks smoothly, so you can swap records out very easily. I can put a picture up tomorrow
Just as a heads up, there are headphone stands on amazon that are very similar to this design: http://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2/ref=sr_1_1?ie=UTF8&qid=1459127066&sr=8-1&keywords=wall+headphone+stand
I don't know if you're trying to do it for the joy of DIY, but if you're doing it to save money these are $6 each (I don't know how much 3D printing cost so sorry if it's a lot cheaper than that). They have some for desks too.
Thought I'd point it out, but otherwise awesome idea, especially being able to configure it differently.
I use this but to be honest, it's kind of long and sticks out a bit. This one would probably work as well.
Tornado is a solid brand. They're strong enough to hold them up, and you can kind of spread them out a bit too if they don't quite fit on your trucks.
I have 4 of these. Easy to install and work great. Just follow the directions carefully - ensure the wall is clean before applying.
http://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2
Those aren't command strips. Command is a specific 3M product line that has a non-sticky pull tab that you use to remove the strip without causing any damage. They are a renter's best friend. What you want is this. Like I said, cut each one lengthwise into 2-4 skinny strips so that they fit completely within the width of the cable (and each strip will have a portion of the pull-tab), and attach a strip every 6-12 inches for your entire run.
I use standard 3M wall hooks (large size). They fit the ring on top of the wands perfectly, and the strap on the headset sits comfortably on them as well.
$50 for about $15 in materials and a tiny bit of thought, really?
Large J Hook - $8 - Can be hand bent out to fit center bar gap on the back bar
GoPro Tripod Mounts x3 - $4
I am usually not one to trash ingenuity and designing your own products to fit your needs, but $50 is a joke. I understand you're selling to a pretty niche market here, however $20 is probably more appropriate a price.
It's nowhere near as good as a wireless setup, but it's a great option if you can't go wireless.
It can be tricky to get it setup correctly so I would advise against using the adhesive hooks that come with then. Command strip hooks do the job just as well and are much easier to remove if you need to make adjustments. https://www.amazon.com/Command-Damage-Free-Small-without-Packaging/dp/B0751TRS6Y/ref=pd_aw_fbt_60_img_3/132-3517570-4357667?_encoding=UTF8&pd_rd_i=B0751TRS6Y
You also need to use the turn signal app if you use the pulley system as your cable will get tangled.
Oh wow i thought you were kidding i imagined this Command Large Utility Hooks, 7-Hooks, 12-Strips (GP003-7NA) - Easy to Open Packaging https://www.amazon.com/dp/B0753NHZVQ/ref=cm_sw_r_cp_api_fRN3AbA1514EK hahaha
Yes, go back to IKEA! Somewhere near the end, around the lamps and ceiling lights, I found these cheap cable snake sleeves:
https://m2.ikea.com/us/en/p/rabalder-cable-organizer-white-20281419/
I also use these for cables under the desk after separating out of the snake and organizing under the desk:
https://www.amazon.com/Command-Clear-Clips-Strips-CL017-13NA/dp/B076ZT3FVN/
These too:
https://www.amazon.com/Command-Damage-Free-Small-without-Packaging/dp/B0751TRS6Y/
And these are great for individual cable control:
https://www.amazon.com/Planet-Waves-Elastic-Cable-10-pack/dp/B001PGXKCS/
I've added to and removed from my setup half a dozen times since I last organized my wires so they're a mess again, so be aware that it's a constant battle.
Edit: these look pretty good too, am going to get some myself if I don't make it to IKEA soon:
https://www.amazon.com/Alex-Tech-25ft-Protector-Sleeving/dp/B07FW3MKGH/
Looks like you made your own plyo-box, nice. Next thing I’d strongly recommend are [tornado hooks]( Tornado 00515 J-Hook https://www.amazon.com/dp/B0050PKJ88/ref=cm_sw_r_cp_api_97rVAbP1KQ9Q7 ) to store you barbell on the wall.
How do you like those bumpers?
I lived in a house where the doorframes extend all the way to the roof so I had to build a custom mount for a hangboard. What I did was buy a simple door frame pull up bar like this and mounted the hangboard to a piece of plywood and then fixed some large hangers on the back of the hangboard so that it could be hung over the pull up bar (make sure you get some very sturdy hooks for this, I used these ones. It's worked very well for almost 3 years now. Highly recommend this approach!
I like using peg racks for cables. Pretty cheap, effective solution.
https://www.amazon.com/Spectrum-Diversified-Wood-Wall-Bamboo/dp/B0058U0XV8/ref=sr_1_4?ie=UTF8&qid=1542053799&sr=8-4&keywords=peg+rack
I would avoid purchasing any accessories now that require power from the port. Right now, there are too many variables to buy any accessories that may require power from the accessory port such as headlights, etc., but you can get those once the port is revealed. To my knowledge, their are no backpacks that can carry the board. You can, however, slide your boosted board through the 2 straps on a regular backpack wheel-side facing your back and then put the backpack on to carry it around. A good option for a wall mount would be this: https://www.amazon.com/Tornado-00520-Large-J-Hook/dp/B0050PLCUW?ie=UTF8&redirect=true If you have any more questions, feel free to ask!
Large Command Hooks
You basically just set up the command hook so that it's tilted (pointing at around 10 o'clock) and then the sensor nicely snugs itself in and conveniently points slightly downward as well
They're also pretty useful for a place to put your touch controllers (learned this one from another redditor)
I second the wiremold recommendation, I used one in the past and it served it purpose well. Also you might look at Command Cord Clips, small plastic clips with an adhesive back to go up walls, desks, etc without having to put holes in things. They breakaway easy if someone trips/snags on the cord (sometimes a good thing) and the adhesive comes off clean when you need to remove them.
For my Zstrip I used these clear holiday light clips to keep it held down, it works phenomenally and the strip perfectly fits through the hook. None of them have fallen off or anything, at least not yet, and it’s been holding it down for months now. Command 3M Clear Mini Light Clips
Love my Denise Interchangeable set, I rarely use them for Tunisian since I haven't put the time into learning anything beyond tss, but they're my go-to hooks for pretty well every project.
Awesome! Cool to see other people have tried it. If it helps here's a link to the command strips I used. Not too expensive if you buy them without the hooks.
This is awesome, and useful!
You? Me? You? Me?
Here you go, friend.
These are the ones I got. Super cheap and they work great.
Do you mean to say that you have the cable just hanging down from the rear view mirror, or did you at least pinch it along the edge of the ceiling and A-pillar? Because four dollars' worth of 3M cord clips did absolutely wonderfully for my setup... although I did find that Gorilla Mounting Tape works better than 3M's supplied adhesive strips.
Headset Hooks are off Amazon. 2 pack for $12.
http://www.amazon.com/gp/product/B00P9GYUE2/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
They are pretty cheap plastic and wasn't too happy when I got them. But they do their job and have been holding up fine, so I guess it's worth it considering other headset stands are big and usually $15-20+ each.
As far as the desk extensions, since Ikea removed their Galant lineup, I don't think you can anymore. But they were sold separately a few weeks/months ago. Try craigslist or searching through their online store, might get lucky.
Not sure what youre going for or have looked at. This might be way off, but i looked up 'j hook' and these are pretty nice id buy 2 of them.
Paste what you were looking at... maybe thatll help narrow it down.
Sorry for pic quality! There's a light in the way XD. I used a 10ft cable extension, command strip hooks, zip ties, and a dog leash to make my Oculus cord retractable!
Purchased items(US):
Total: ~40$
Mine definitely has help. I use these. :)
Looking to clean up my brewspace a bit, wondering if anyone has any idea what I can do to get my 6.5gal buckets up and off the floor. An upside down mount is preferable.
I'm hoping to find something like this, but instead of going out (away from the wall) as much, it would go up more to keep the bucket more secure. Thoughts?
I got one if these from home Depot, and it works pretty great.
https://www.amazon.com/Tornado-00520-Large-J-Hook/dp/B0050PLCUW/ref=pd_lpo_vtph_469_bs_t_1?_encoding=UTF8&psc=1&refRID=ZWD329V4NP21HCXRAYFV
Not that I know of. Epoxy is pretty strong and whatever you use to remove it will most likely take off the paint as well. You can always repaint it.
Alternative is to use command hooks. They have the pull down tab that can be easily removed later. But since this is outdoor, heat will be a problem and these will probably fall off on their own after some time. Just buy new one and replace them if that's the case
https://www.amazon.com/Command-Small-16-Hooks-Strips-GP067-16NA/dp/B0751TRS6Y/
This looks pretty good.
I have this more minimalist key holder that's served me well (I actually use it)- http://www.amazon.com/Umbra-Magnetter-Wall-Mount-Organizer-Espresso/dp/B002E35GFU
Here ya go.
For others curious, the Headset is SteelSeries Arctis 7. They frequently go on sale--I got mine below $100. It's a fabulous headset. The only reason I wouldn't recommend it is if you happen to have a really big head--they fit my kinda-big noggin ok, but I'm right at the end of what they can handle comfortably.
Just a couple of those double-sided adhesive things with the pull tabs. Works wonderfully!
Like these: https://www.amazon.com/Command-Refill-Strips-Medium-9-Strips/dp/B0014CQGW4
Thanks for the fun contest!
Yeah. Just use those same Command Refill Strips. Each strip holds 1-2 lbs. They are safe for painted drywall and do not leave a residue when removed.
In fact, I used two of them to adhere the USB Charger behind my dresser. I'm sure 4 strips would be plenty to adhere a router to the wall.
First and foremost, nylon zip-ties, along with a tool to tighten and cut them:
https://www.amazon.co.uk/s/ref=nb_sb_noss_2/261-5150240-1396533?url=search-alias%3Daps&field-keywords=cable+tie+tools
You can get adhesive clips to tie cables under a desk:
https://www.amazon.co.uk/Adjustable-Cable-Clips-Adhesive-Clamps/dp/B01LYO307S/ref=sr_1_6/261-5150240-1396533?ie=UTF8&qid=1540176501&sr=8-6&keywords=cable+clip+adhesive
These 3M Command brand ones are designed to be removed without marring the surface they're stuck on:
https://www.amazon.co.uk/Command-17302CLR-Small-Clips-Strips/dp/B0084M696K/ref=sr_1_2/260-9985987-3740648?ie=UTF8&qid=1540177482&sr=8-2&keywords=3m+command+cable+clips
These Velcro brand cable ties on a roll are cheaper and more convenient than the fancier kinds with tabs:
https://www.amazon.co.uk/VELCRO-Brand-One-Wrap-Reusable-Ties/dp/B00186QF2C/ref=sr_1_8/261-9295406-7442635?ie=UTF8&qid=1540176024&sr=8-8&keywords=cable+ties+velcro
If you want to bundle together cables in a sheath, these ones with zippers work better than velcro ones:
https://www.amazon.co.uk/Management-JOTO-Computer-Entertainment-Organizer/dp/B015HWXG4M/ref=sr_1_7/261-9295406-7442635?s=diy&ie=UTF8&qid=1540176119&sr=1-7&keywords=cable+zipper
(word or warning: the zippers are not exactly premium YKK or RiRi quality, be careful when engaging them to avoid cross-threading..
For routing cables, these Danish organizers are pretty sweet (not available on Amazon.co.uk for some reason):
https://www.amazon.de/s/ref=nb_sb_noss_2/258-3647476-1208213?__mk_de_DE=ÅMÅŽÕÑ&url=search-alias%3Daps&field-keywords=cablox
Generally speaking, it pays to replace power cords, Ethernet cords and the like with shorter versions to avoid having slack cable turn into spaghetti. In the UK, your plugs are so bulky a splitter cable like these makes sense:
https://www.amazon.co.uk/s/ref=nb_sb_noss/258-6762083-9871312?url=search-alias%3Daps&field-keywords=IEC+power+cord+uk+plug+dual&rh=i%3Aaps%2Ck%3AIEC+power+cord+uk+plug+dual
Finally don't forget to label your cables. This Brother flexible tape works in some of their label makers (you need either a PC-connectable one or one that has software to print labels that can be wrapped around the cable):
https://www.amazon.co.uk/Brother-TZEFX651-TZEFX-651-BLACK-YELLOW/dp/B00WFOQERC/ref=sr_1_4/261-5989537-8091249?ie=UTF8&qid=1540177234&sr=8-4&keywords=TZe-FX651
here is a shot of it in action:
https://majid.info/images/FullSizeRender.jpg
They also have some label makers that will print on heat-shrink tube labels, but obviously that will not work on ready-made patch cables.
I mean... we just installed something like this: https://www.amazon.com/dp/B0050PLCUW/
It was less than 10$ and you can even hook the final part through the two prongs and it holds it in place great. I don't know why you would need to rig something up on the ceiling and stuff. Why would you think it would be easier to use? Did you install the plug on the wrong wall or something?
If you need, I could take some photos when I get home.
I just went with the larger tornado hook. Two screws right into drywall holds a BB perfectly. Looks good.
https://www.amazon.com/gp/product/B0050PJ2PE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I agree with this meme to an extent. I feel like mouse bungees area waste of money. I've been using a single Command Hook as long as I can remember and haven't had any problems with it, and even better it's out of the way stuck on the back of my monitor. Recently switched back to the fUNC F10.s that comes with a cable "bungee" that is on the mousepad. Bungee's seem like too much of a gimmick to me
I don't know how to do links properly : https://www.amazon.com/Command-Hooks-Value-18-Hooks-17006-18ES/dp/B001KYOGJG/ref=pd_sim_60_1?_encoding=UTF8&pd_rd_i=B001KYOGJG&pd_rd_r=61dfb6c7-cf29-11e8-84cd-5d1350972647&pd_rd_w=84DUQ&pd_rd_wg=iuSsC&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=18bb0b78-4200-49b9-ac91-f141d61a1780&pf_rd_r=PPXY6N49G8BXSB8M3K7G&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=PPXY6N49G8BXSB8M3K7G
https://www.amazon.com/LeHigh-Crawford-Flip-Storage-FSR13/dp/B0000DH4NL/
i used the 2 included screws (regardless of what the reviews said), drilled directly into a stud. rock solid.
i only had to pay a really small non-refundable deposit so i have a lot of freedom in that regard. in general though, if you have access to matching paint, you could patch up any of the holes you'd need very easily.
I need to run an ethernet cable about 50 ft along a wall, and I was wondering if anybody had some good recommendations for some wall cable holders that won't damage the paint. I was looking at something like these:
https://www.amazon.com/gp/product/B0084M696K/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
A much more elegant solution: http://www.amazon.com/gp/aw/d/B002E35GFU/ref=redir_mdp_mobile/191-7840038-8213626
It may seem counterintuitive, but install curtains and sheers. Once you have them installed you can leave the blinds up at a higher height all of the time. It works for my boys. I also took all of the cord pulls and tucked them behind and fastened the ends between the window and blinds with this 3M hook. I know this description is a little confusing but it works. If you would like more details, please let me know!
Or some zip ties. Hold ém to the underside of the desk with some of these. I used this combination for cable-managing the inside of my Antec 300; they work pretty well!
Very nice since your monitor didn't come with a headphone hanger like many do, why not put one of these on the back:
https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2
actually im pretty sure this is it:
https://www.amazon.com/Tornado-00510-Extended-U-Hook/dp/B0050PJ2PE/ref=sr_1_1?s=hi&ie=UTF8&qid=1469717508&sr=1-1&keywords=orange+u+hook
Command Strips are safe for your banister and could help support the vine without creating an eye sore.
It looks exactly like a Command hook. https://www.amazon.com/gp/aw/d/B0753NHZVQ
OP, If I'm right, they are easy to remove and reattach later before moving out. You would have to buy a new sticky strip for it.
Hang it up with command strip refills. They work great, I use them to hang up tons of stuff!
Command Strip Wire Clips work great!
https://www.amazon.com/Command-Clips-Small-8-Clips-17302CLRES/dp/B0084M696K/ref=sr_1_1?ie=UTF8&qid=1485533774&sr=8-1&keywords=Command+Strip+Wire+Clips
You’re welcome to try but I don’t think the pins would be able to support the shelf, let alone anything you put on top. You should try some of these hooks. They stick to the wall and are designed to be removable without leaving any marks.
I love my Denise Interchangeables - http://www.amazon.com/DENISE-INTERCHANGEABLE-CROCHET-HOOK-SET/dp/B001IAHNCE
Command Light Clips, Mini, Clear, 45 clips, 54 strips, Indoor Use (CL806-45NA) https://www.amazon.com/dp/B076ZRRFD4/ref=cm_sw_r_cp_tai_Jag4DbZVAPJ4F also Aldi’s sells generic brand clear ones.
I see. I recommend something fancier like a Utility Hook:
http://www.amazon.com/Tornado-00515-J-Hook/dp/B0050PKJ88/ref=sr_1_1?ie=UTF8&qid=1419880108&sr=8-1&keywords=utility+hook
Ah, I've had that happen before. Luckily work is within walking distance, so it wasn't so bad. Do y'all have a key holder by the door? We've got one of these at my place!
Thanks! I got it on amazon here
They don't damage any surface. (thought you Americans would be pretty cluey about 3M products)
https://www.amazon.com/Command-Refill-Strips-Medium-9-Strips/dp/B0014CQGW4/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1497431231&sr=1-2-catcorr&keywords=3m+command
I wonder if you can get away with using these? Depends on how much weight you put on them but I bet it would work + be cheaper?
Command Light Clips, Mini, Clear, 45 clips, 54 strips, Indoor Use (CL806-45NA) https://www.amazon.com/dp/B076ZRRFD4/ref=cm_sw_r_cp_api_i_FRWZDb4TE5ZT5
The equipment pictured are:
The Rift S, and updated Touch Controllers.
Command mini-hooks to mount the touch controllers in grabbing position when not in use.
Saitek X45 HOTAS setup - I found a number of these used available for around $45. They no longer support Windows 10 with their drivers, but these work fine for me with the older drivers. No link because any link to a used set will be sold soon after it's posted.
Selfpro men's sweat wicking headbands. They help reduce sweat and heat in the headset, as well as hold your hair back so it can't grease up your lenses.
Koss KSC75 headphones. Take off the clips and just tuck them under the headband, over your ear. Wind the cord around the halo over your ear, so that at rest they dangle in the right palce. The clips snap-off and snap-on, so prying them off won't damage them.
Three inch googly eyes. Easily the most important part of this kit after the headset itself.
Amazon Basics rechargable batteries.
Universal battery charger with LCD display.
Powerpax storacell AA battery caddy, so I don't have to fuck about with loose batteries. Take batteries from the right, add recharged batteries on the left. If you don't pack it 100% full, the empty space can show you which batteries have the oldest recharge - first in, first out.
Cheap and shitty A-frame computer desk.
Not pictured: Shitty Essentials armless swivel chair
EDIT: There are not any custom grips. The stock straps are hitched to the ring and re-attached.
I'm not sure you would need to fix the extra board. It might just lay on top of the mantle. If not, as said, holes in the wall are less difficult to deal with. Or I wonder if you could do something clever with something like this...
Command Large Utility Hook, White, 3-Hooks, 6-Strips (17003-3ES) https://www.amazon.co.uk/dp/B000M3V8XI/ref=cm_sw_r_cp_api_i_dxBtDb1ZMKMY6
(sorry - thought this got eaten in a spam filter and was sad)
This is 3M magic adhesive that I have used before and doesn't cause damage when removed a year after application.
My flatmate speculates the wall is made of plaster, if that helps.
I was planning on using either:
large 3m strips
which are rated by 3M at 5 lbs/strip, and put 9 strips/board, and maybe fill in the gaps with something that comes 9 strips/pack like these medium strips (3lbs/strip)
Well, then that opens the door to stuff like this.
Thanks, I was worried there. The hook I'm using is tied to the leg of my desk. Easy to do that with all the holes. I'll reformat this link as soon as I'm on desktop: https://www.amazon.com/dp/B0050PJ2PE?ref=yo_pop_ma_swf
I have three and they work fine with command strips. One has been on the wall for about 4 months with no issues, and just put two more the ceiling. You can use either normal command strips, or the velcro ones and they should be fine. Makes moving it to adjust the position much cleaner.
I also use the command strip cord clips to secure the cable to the ceiling/walls to prevent the cable from moving the sensor over
time. If it hangs from the sensor it could shift it and then your tracking would be off.
https://www.amazon.com/Command-Clips-Small-8-Clips-17302CLRES/dp/B0084M696K
Allowed?
Are you, while showering, communicating with your broker with canned sms in pebble glance to buy/sell stock of the company you work for, based on info you get at work?
Are you using a remote camera control app to take pictures of said shower with other individual(s) without their knowledge?
Are you, during your cleansing routine, using pebble tasker and bittorrent to seed music and video files for which you are not the copyright holder and do not have express written consent?
Not allowed!
Seriously, just get these
I used this until I got mine. Not the prettiest, but it works.
Tornado 00520 Large J-Hook https://www.amazon.com/dp/B0050PLCUW/ref=cm_sw_r_cp_apa_ommryb6GKKK7C
It's a garage ladder hook lol
I bought these for each side of the bed and my guests love them.
https://www.amazon.com/dp/B0775ZTKZL/ref=cm_sw_r_cp_awdb_t1_MpaNBb49X3T4Y
Also if it's a shared bathroom, hooks on the back of the bedroom door so they can keep their towels in their room but hang them up to dry.
https://www.amazon.com/dp/B002OJFWBC/ref=cm_sw_r_cp_awdb_t1_QraNBbECGSEMT
What I've done in the past is mount a cable ladder to the wall, then the other end to the top of the rack, then ran the cable up and over the ladder, so it's suspended... (something like this: https://www.tripplite.com/~SRCABLELADDER with this, I think: https://www.tripplite.com/~SRLADDERATTACH/ or maybe just some random bolts/plates from a hardware store).
Since your cabling is already completely ran/terminated, only thing that would work is what you posted or some sort of large U-hook.
They are these, recommended to me by someone here on the Boosted sub.
Tornado 00520 Large J-Hook https://www.amazon.com/dp/B0050PLCUW?ref=yo_pop_ma_swf
$29 for hooks? Yeah, no thanks.
Half the price. Just as good.
I'm not OP, but it looks like this one: https://www.amazon.com/Umbra-Magnetter-Magnetic-Organizer-Espresso/dp/B002E35GFU
I have my normal stock vanguard on it right there but I have a boosted board that I use on it.
I have j-hook, it’s the tornado brand I think
found them
Don't laugh. I have headphone stands that I use near my bookshelf and end-table. But, I have a smaller desk and not enough space for a full-fledged stand. So, I bought these:
https://www.amazon.com/gp/product/B00P9GYUE2/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
They stick right on to the wall using 3m tape and are solid. Plus, I like that it's wide enough to allow the headphone band plus cables.
A desk-length mousepad.
https://www.amazon.com/Corsair-Gaming-MM300-Anti-Fray-Extended/dp/B01798VS4C/
Monitor Mounts
https://www.amazon.com/gp/product/B00B21TLQU/
Cable Management knick knacks.
Ambient lighting behind your monitor. I just use a variable desk LED lamp.
https://www.amazon.com/gp/product/B01HOAVK0W/
Headphone wall mounts.
https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2/
A decent speaker/sub combo for when you want to just sit back, relax, and watch a movie.
https://www.amazon.com/Logitech-980-000382-Z313-Speaker-System/dp/B002HWRZ2K/
A Microsoft Wireless Adapter + Couple of XB1 Controllers = local wireless multiplayer gaming (up to 8 controllers I think).
https://www.amazon.com/Microsoft-Xbox-Wireless-Adapter-Windows/dp/B00ZB7W4QU/
Decorate already!
Mother of Dragons
This can go on top of your computer
A cat calendar
Rubik's Cube
Fun magnet to hang your keys on
I've had mine for a while now (8 months) and I can safely say they're quite durable by themselves, even dropped it a few times. If you're worried about damaging it, I advise getting some adhesive hooks and hanging off of that.
I use these hooks on an ikea storage thingy and it's been rock solid for months. Use two, one for both of the remotes and the other for the HMD. Hang by the rear of the headband (the triangle hole thingy).
Command Small Refill Strips, White, 64-Strips (GP022-64NA) - Easy to Open Packaging https://www.amazon.com/dp/B0751RPC6Q/ref=cm_sw_r_cp_api_63r1Ab2VXJ83P
Display: Command by 3M Damage-Free Decorating Clips, 45 Clips, 54 Strips, Hangs up to 90 feet of lights, Easy to Open Packaging (CL806CLR-45ES) https://www.amazon.com/dp/B076ZRRFD4/ref=cm_sw_r_cp_api_ZQjZBb976G88Y
Storage: 3.75 gallon storage bin. Holds about 20–30 carded Hot Wheels. https://www.target.com/p/sterilite-174-clearview-latch-storage-bin-clear-with-purple-latch-3-75gal/-/A-13794491
http://www.amazon.com/dp/B00P9GYUE2/ I really like these things- command strip catered to headphones. I stuck them on the side of my desk. They work well.
Found them. I guess I should have done that first.
Those are nice hooks.
I believe you would want these ones instead in order to fit the wheels: http://www.amazon.com/gp/product/B0050PLCUW
I decided to hang my boards on hooks mounted to the wall. If anyone is interested, I suggest these hooks. You just need 1 per board and they cost $7: Tornado Extended U-hook
I think you will appreciate these instead of those nails. http://www.amazon.com/Command-Small-Clips-Clear-8-Clip/dp/B0084M696K/ref=sr_1_1?ie=UTF8&qid=1407009922&sr=8-1&keywords=command+small+cord+clips
Something like this? http://www.amazon.com/LeHigh-Crawford-Flip-Storage-FSR13/dp/B0000DH4NL/
back in the stoneage, I used these in my dorm to hold up lights like that.
Would you recommend those over the Tornado J hooks?
https://www.amazon.com/dp/B0050PLCUW/ref=cm_sw_r_sms_t2_api_TYH4xb6PSSGZ0
An over the door set of hooks like this
https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2/ref=sr_1_6?ie=UTF8&qid=1523573997&sr=8-6&keywords=headphone+mount
Thank you
I would think something like this would work
https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2
if not just buy a controller hanger and hot glue it on
Does it lay flat to the TV, so that the strip faces backwards towards the wall? If so, is it just a straight strip or how did you bend around corners? I used these.... https://www.amazon.com/gp/aw/d/B0751TRS6Y/ref=sspa_mw_detail_0?ie=UTF8&psc=1
I solved this issue by using some small command strips!
I used a few these type of adhesive pads.
http://www.amazon.com/Command-Medium-Mounting-Refill-9-Strip/dp/B0014CQGW4/ref=sr_1_5?ie=UTF8&qid=1457997991&sr=8-5&keywords=3m+adhesive
They're holding really well so far.
Yup. Phone in the left pocket, wallet in the right, keys hooked onto my belt loop.
Also, I have one of these as my key-holder. It's stylish and works really well.
Here's a link:
https://smile.amazon.com/gp/product/B00OABXY9O/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1
I cut out 2 areas for the filters. It works great for keeping all the fish and snails in while also allowing my lights to fully hit the tank. Other people make frames out of screen window kits but I'm not handy enough to use a power saw so I secured the mesh to my tank with command strips:
https://smile.amazon.com/gp/product/B000M3YGHS/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
and just lift areas/corners of the mesh off when I need to access that part of the tank.
I used one of these things with a fair degree of success
Tools used:
- Cable Clips (100 pack) - $12.49 on Amazon
- Command Hook (3 pack) - $6.29 on Amazon
- Oculus Rift Sensor Wall Mount (2 pack) - $12.99 on Amazon
I bought it in store and don't see it on their site...
The hooks are sort of like this, but dual single hooks rather than a double hook (although the double would work fine if balanced properly):
https://www.amazon.com/Tornado-00520-Large-J-Hook/dp/B0050PLCUW/ref=sr_1_3?ie=UTF8&qid=1496154616&sr=8-3&keywords=tornado+hook
I actually have one that mounts to the side of my desk, it's a sticky pad attachment here is a link Stick-on Headphone Hooks 2 Pack https://www.amazon.com/dp/B00P9GYUE2/ref=cm_sw_r_cp_api_0ia6xbBTSYNMG
I would highly reccomend it if you have space for it. I used to use one that is just a stand on my desk and using this new one allowed me to use dual monitors
[Here's a pic of the jersey hanging up and a pic of the hook] (http://imgur.com/a/jeKXW). You can find them literally anywhere. I think I got mine at target and they're like 6 bucks for a pack of 2.
Edit: the hooks on amazon. They work like a charm and they are cheap as hell.
Got mine at home depot but first saw them on amazon. http://www.amazon.com/LeHigh-Crawford-Flip-Storage-FSR13/dp/B0000DH4NL/ref=sr_1_2?ie=UTF8&qid=1398650983&sr=8-2&keywords=bike+wall+mount
That is cute and all, but this is the exact same thing and they only cost 8 bucks.
I have done this! Home depot sells big 4x8 sheets of whiteboard like material. In the store it will be labeled as 'white panel board'. http://www.homedepot.com/p/Eucatex-32-sq-ft-MDF-White-Thrifty-Panel-Board-143973/204982659
Then buy a bunch of command strips. http://www.amazon.com/Command-Medium-Mounting-Refill-9-Strip/dp/B0014CQGW4/ref=sr_1_3?ie=UTF8&qid=1418242347&sr=8-3&keywords=command+strips
Put 2-3 strips on each side of the back of the board (8-12 strips per board) leaving just the rounded tabs sticking out past the edge of the board. Then peel off all the wall side backings from the strips and place the board on the wall.
You will only have one go at this, if you miss place the board, you will probably have to replace all the command strips to try again, so be careful. Then, press down hard on the location where each command strip is. You will have to leave small ~1" gaps between the boards so that you can get at the command strip tabs in case you need to remove the boards.
> I'd set one of my sensors right on top of the thermostat
Don't do this. Heat rises. Heat from the thermostat will affect the sensor. Stick on the wall next to the ecobee3 using a Command Strip or something else that won't leave a mark when you remove it.
These 3M's work fine for my 12.5 oz, and sometimes another pair behind them.
If you have a garage, the simplest way is a couple of these bike hooks, of course I only used them for like 2-3 sticks at a time, but I imagine there'd be larger hooks you could use.
Amazon, my man. Here it is... http://www.amazon.com/gp/product/B0000DH4NL/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I find that the small(er) type of command hooks, found here, work fairly well at holding up ethernet cables. I use these to run my 100ft ethernet from the first floor of my place up to the bedroom. They're a little expensive, but they get the job done.
> as long as your not stressing any wires i think it would be fine to just. i used this for a while for my logitech g430 headphones http://www.amazon.com/Command-Large-Plastic-Hooks-White/dp/B000M3V8XI not sure how well it would work for the hyperx
As others have said - get a longer cable.
In case your parents don't want any more holes in their walls, you could use some of these clips to help route the cables:
https://www.amazon.com/Command-Clips-Small-8-Clips-17302CLRES/dp/B0084M696K
or
https://www.amazon.com/Command-Outdoor-Light-16-Clips-17017CLR-AWES/dp/B01LXI1R71
We used these in one of our kids' college apartment to get the cables up off the floor - no holes in the walls at move-out time.
I like using the Velcro ones and just cut them in half. This way it gives me some sensors that I can move when I need to.
If I have a more permanent sensor somewhere, I use the small refill packs
Command Refill Strips, Small (GP022-64NA) https://www.amazon.com/dp/B0751RPC6Q/ref=cm_sw_r_cp_api_i_-kd3DbQ3H7EYB
3M command strips are what you want.
I mount all my door/window sensors + IR sensors with them.
http://www.amazon.com/Command-Medium-Mounting-Refill-9-Strip/dp/B0014CQGW4/ref=sr_1_1?s=industrial&ie=UTF8&qid=1457396625&sr=1-1&keywords=3m+command+strips
If you are looking for a temporary permanent solution Command strips work wonders. I've nailed a few USB hubs down with them. No marks when you remove them either.
https://www.amazon.com/dp/B0000DH4NL/ref=cm_sw_r_sms_awd_GEw-wbEBD7MEK
There is always space in the apartment, as evidenced by our multiple bikes hanging from various walls.
One option
Another
A third hung from the ceiling
In case you couldn't find it, this is the comment and (more importantly) this is the wall mount/rack.
I got it from Amazon, but I've also seen it at Lowes.
I haven't tried this yet but I've seen people use these things:
http://www.amazon.com/Universal-Small-Binder-Silver-10200VP/dp/B00B9GTBYA/ref=sr_1_4?ie=UTF8&qid=1463623365&sr=8-4&keywords=binder+clip
and put a tack on the handle of it to hold it. Instead of a tack some people use this instead with the binder clips:
http://www.amazon.com/Command-Large-Plastic-Hooks-White/dp/B000M3V8XI/ref=sr_1_9?ie=UTF8&qid=1463623579&sr=8-9&keywords=utility+hook
http://www.amazon.com/Command-Large-Plastic-Hooks-3-Hook/dp/B000M3V8XI/ref=sr_1_2?ie=UTF8&qid=1382731502&sr=8-2&keywords=command+hooks+large
Command Large Utility Hook, White, 3-Hooks, 6-Strips (17003-3ES) https://www.amazon.com/dp/B000M3V8XI/ref=cm_sw_r_cp_apa_.8oPzbCRT2VF5
Use these.
Command Large Plastic Hooks, White, 3 Hooks
https://www.amazon.ca/gp/product/B000M3V8XI/ref=as_li_ss_tl?psc=1&linkCode=ll1&tag=thebigaawes06-20&linkId=f6d8e090a62e47f5ad39e51b0099c32a
https://images-na.ssl-images-amazon.com/images/I/81a5WkObjZL._SL1500_.jpg
To run ethernet cables throughout my home without wiring through the walls, I used Command Decorating Clips to attach different length Jadaol Cat6 white, flat ethernet cables (e.g., this 100 feet model) to the walls and ceilings. I separated each clip by about 2 feet. Small, simple (unmanaged) gigabit ethernet switches (I have a few of this model, which is about the size of a human hand) provide access points throughout the network while connecting each cable. Guests only notice the entire setup when I specifically mention it to them.
[I wondered the same thing earlier] (https://www.reddit.com/r/MechanicalKeyboards/comments/47503q/help_question_for_the_modders_and_custom_builders/). I'm inclined to take a0-c's advice and just do the command strips. They do make those strips without the hooks included.
Command strips
Command Refill Strips, Medium, White, 9-Strips https://www.amazon.com/dp/B0014CQGW4/ref=cm_sw_r_cp_api_MX9UBb7438GR5
https://www.amazon.com/Command-Refill-Strips-Medium-9-Strips/dp/B0014CQGW4/ref=sr_1_5?ie=UTF8&qid=1478219339&sr=8-5&keywords=command+strips
The Planeswalker art above the TV are actually posters. You could try multiple 3M sticky strips https://www.amazon.com/Command-Refill-Strips-Medium-9-Strips/dp/B0014CQGW4
might take a few since playmats are heavier.
I just use Command Hooks. These ones
Command hooks
http://i.imgur.com/0Pdfj.jpg
Link
This key magnet
Tornado 00510 Extended U-Hook https://www.amazon.com/dp/B0050PJ2PE/ref=cm_sw_r_cp_api_7ujHybMH7PA18
We hang our hoops (about 10?) on Tornado 00510 Extended U-Hook https://www.amazon.com/dp/B0050PJ2PE/ref=cm_sw_r_cp_api_D8jdAb4XJQ3N1
For the boards I'm using this
Tornado 00510 Extended U-Hook https://www.amazon.com/dp/B0050PJ2PE/ref=cm_sw_r_cp_apa_i_lhtJDbX3ZERAT
For the helmets I'm just using large command hooks and the chargers I'm using a 3D printed charger/remote holder.
Tornado 00520 Large J-Hook https://www.amazon.com/dp/B0050PLCUW/ref=cm_sw_r_cp_api_p9Hbzb40PVZJT
Or these without the spacers he talked about.
Tornado 00510 Extended U-Hook https://www.amazon.com/dp/B0050PJ2PE/ref=cm_sw_r_cp_api_O8HbzbPYN25FF
https://www.amazon.com/Tornado-00515-J-Hook/dp/B0050PKJ88
https://www.amazon.com/Tornado-00515-J-Hook/dp/B0050PKJ88/ref=sr_1_79?s=home-garden&ie=UTF8&qid=1536517409&sr=1-79&keywords=hook
maybe some JB weld epoxy, rubber cement, duct tape and elbow grease to keep it on.
Tornado 00520 Large J-Hook
https://www.amazon.com/dp/B0050PLCUW/ref=cm_sw_r_cp_api_M1c1xbWZWD4PP
Buy these, 2 of them
https://www.amazon.com/dp/B0050PLCUW/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=techwewant-20&linkId=d6dffdefe1cee4f277f16d030b388f9c
a hook anchored to your wall next to the outlet?
Or a pair of these hooks for only $14!
Tornado 00520 Large J-Hook https://www.amazon.com/dp/B0050PLCUW/ref=cm_sw_r_cp_api_KTdezbAG6Z184
https://www.amazon.com/dp/B0050PLCUW/ref=asc_df_B0050PLCUW4978213/?tag=hyprod-20&creative=394997&creativeASIN=B0050PLCUW&linkCode=df0&hvadid=167123415012&hvpos=1o1&hvnetw=g&hvrand=10176939228955980572&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9013074&hvtargid=pla-272717152766
https://www.amazon.com/Command-Clips-Clear-strips-17302CLRES/dp/B0084M696K/ref=pd_cp_107_1/134-7496698-9004128 https://www.amazon.com/Cable-Concealer-Wall-Cover-Raceway/dp/B01JKO8724 https://www.amazon.com/SafCord-Carpet-Cord-Cover-Length/dp/B009M5D7J0 or https://www.amazon.com/BCQLI-Standard-Replacement-Supply-Transparent/dp/B07GQWSNPR
The smallest I am aware of is 3m command cord clips.
https://www.amazon.com/dp/B0084M696K/ref=cm_sw_r_sms_apa_i_EVTTDbSVV1JBW
Or these for just $3.88
Link to the wall clips. https://www.amazon.com/gp/product/B0084M696K/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I had to break off a little part of the clip with some pliers to get things to sit right.
https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2/ref=mp_s_a_1_2?keywords=stickon+headphone+hooks&qid=1562368696&s=gateway&sr=8-2
There are these for a little over $5
https://www.amazon.com/eBoot-Headphone-Headset-Hanger-Monitor/dp/B01M0IRLU3/ref=sr_1_4?s=electronics&ie=UTF8&qid=1487374764&sr=1-4&keywords=Stick-on+Headphone+Hooks
I personally have these
https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2/ref=sr_1_2?s=electronics&ie=UTF8&qid=1487374764&sr=1-2&keywords=Stick-on+Headphone+Hooks
https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2/ref=sr_1_4?ie=UTF8&qid=1506364685&sr=8-4&keywords=headphone+hanger
Or meant for headphones. I have two, one on the case and one on the wall behind the desk.
http://www.amazon.com/gp/product/B00P9GYUE2?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s01
I do believe some people have used these:
https://www.amazon.com/Tornado-00520-Large-J-Hook/dp/B0050PLCUW/ref=sr_1_1?ie=UTF8&qid=1466642057&sr=8-1&keywords=large+j+hook
Do note that these are the large j hooks. Tornado sells a smaller one which I don't think clears the boosted's wheels.
WARNING: The post above is full of referral links.
Here's a copy with all of OP's referral links removed:
CART
PRODUCTS
EQUIPMENT
Not an official purpose-built mount, but i couldn't be happier with how this hook worked out for my oculus/touch:
https://www.amazon.com/gp/product/B0050PJ2PE/
Unfortunately those hooks are £53 each here. 😔 https://www.amazon.co.uk/dp/B0050PLCUW/ref=cm_sw_r_cp_api_KdIbzbZZ0R2WS
I got my mount over the weekend but adhesive was stuck to the paper and I couldn't take it off. I ended up taking off all the foam and replaced it with Command Medium Mounting Strips and it seems to be holding up.
Depending on the lag screws you used you might be fine. I did a pair of screws in each 2x4 (1 per joist spanned) as each screw was rated for 300 lbs. The pulleys are all rated at 250lb and the rope is 280lb. The eyes that each pulley hangs from are rated for 200lbs, and the little rings between the pulley and eye are like 300lb. I made sure each point of failure could/should be able to hold the entire weight of the top.
I just bought some of these to type into the ropes, I think they might work really well:
https://www.amazon.com/Tornado-00520-Large-J-Hook/dp/B0050PLCUW
They were in stock at Home Depot. they should avoid weight on the seals and not slip out. I might still do a bungee or something between them, though.
My solution to exactly this issue:
Flat Ethernet cable, tiny 3m cable clips.
The skirting boards in our house are white and the cable is halfway down below the carpet, so most people don't even notice it until I point it out to them. Goes through a doorway without getting in the way, too.
Those flat cables may or may not be great for long distances, but I've got that 25' / 8m one running gigabit and ~11W of PoE and have no issues whatsoever.
Three of these bad boys: http://www.amazon.com/Command-Large-Plastic-Hooks-White/dp/B000M3V8XI/ref=sr_1_4?ie=UTF8&qid=1452097700&sr=8-4&keywords=Command+hooks
Two on the bottom about an inch or two from the end of the sleeve and one on the top in the center.
I use these. They're ok for $10, my only complaint is that it kinda kills the headband on my M50 due to the extra force on it. I don't have the room for headphone stands so I'm stuck with hangers until I change my living arrangements.
Something like this! This have some with velcro and some with just two sticky sides. I used the sticky ones but either would work!
Command Refill Strips, Medium, White, 9-Strips - 17021P https://www.amazon.com/dp/B0014CQGW4/ref=cm_sw_r_cp_apa_i_e1VBCbFSP2G9A
Edit: I spelled velcro wrong