Reddit mentions: The best household doors

We found 452 Reddit comments discussing the best household doors. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 189 products and ranked them based on the amount of positive reactions they received. Here are the top 20.

15. EACHEN WiFi Wireless Inching Relay Momentary/Self-Locking Switch Module DIY Smart Garage Door DC 5-32V AC90-260V Ewelink App Compatible with Alexa Echo Google Home Nest IFTTT (ST-DC1)

    Features:
  • Romote control & Voice Control: You can remote control your home's light, fan, garage door, humidifier etc. by using eWelink app. This wifi switch works with Alexa/Google Assiatant/IFTTT, you can use voice control to turn your home appliances on/off.
  • Easy WiFi Setting Up: Supports 2.4G WiFi network connection only, doesn't support Mesh wifi system and 5G WiFi network!! Download ewelink APP and register an account, then follow the instruction to complete the wifi configuration. (you may need a wifi extender if you are plan to install it in a place with weak wifi signals)
  • In inching mode (momentary mode), if you press the button on the app (or the manual button on the board), the switch will be opened, and then auto closed after 1 second.
  • In the Self-locking mode, when you press the button on APP (or the manual button on the board) for one time, the relay will be on. The relay will be off only when you press the button once again.
  • It can let you DIY a lot of smart projects: smart lights, fans, garage door, humidifier, thermostat etc. eWelink also provides other functions such as timer setting, share controling, and schedule. You also can set routines in Alexa or google home to make things more convenient.
EACHEN WiFi Wireless Inching Relay Momentary/Self-Locking Switch Module DIY Smart Garage Door DC 5-32V AC90-260V Ewelink App Compatible with Alexa Echo Google Home Nest IFTTT (ST-DC1)
Specs:
ColorDC-1
SizeST-DC1
▼ Read Reddit mentions

18. 4 Channel WiFi Momentary Inching Relay Self-Lock Switch Module,DIY WiFi Garage Door Controller (5-32V)

    Features:
  • Voice Control,works with Alexa Google Home Nest , Link "eWeLink Smart Home Fan" capability. You can request Alexa or Google assistant to turn your devices on / off.Remote ON/OFF Your Lights Garage Door from anywhere by Phone
  • 4CH 12V eWelink WIFI Switch,Control 4 electrical appliances Individually, with Lower Power Input,easily to Power it with phone charger and micro usb cable.
  • Easily Share Function,Share Control with Other eWelink Accounts,Invite Family to Enjoy Free Remote Contorl,Free app remote(Invitees need to download and login in their eWelink), Both Android and IOS can search ewelink and download, register and control your home appliances.support 2.4G WiFi only,if your router with dual bands and same SSID, please close 5G firstly,or change to different SSID.
  • Three working modes: Inching Self-locking Interlock. can be used for DIY Garage Door Opener and other Home Appliance.You can set working mode by channel, and rename each channel,DIY smart shutter switch,press the mode change button on the board to set interlock mode,then set inching time in ewelink app
  • Timing and Status Real-time Monitor. Smart Scene: Trigger on/off by temperature, humidity or other environmental conditions,It supports 8 group timing function and Share Control with Family
4 Channel WiFi Momentary Inching Relay Self-Lock Switch Module,DIY WiFi Garage Door Controller (5-32V)
Specs:
Height0.98 Inches
Length2.95 Inches
Size74.3*72.7*24mm
Weight0.0881849048 Pounds
Width2.87 Inches
▼ Read Reddit mentions

19. iGotTech Magnetic Screen Door, Full Frame Seal. Covers Doors up to 34 x 82 Inches MAX. (Item Size: 36 x 83)

    Features:
  • ↔ 🚪 ↕ Is Your Door Opening 34" by 82" OR LESS? If yes, this magnetic door screen will fit your door.Actual screen size is slightly larger (36" x 83") to overlap door trim & securely attachment to door frame. Instructions & safety tacks included. See all available sizes to order the perfect size for YOUR door opening.
  • 🌬 Why is fresh, bug-free air in your future? Because your new UnBugs Magnetic Screen Door is stacked with 26 powerful magnets, with full-frame attachment. That means no nasty flies or mosquitos get in with all that fresh air. When home is the place to be – be comfortable! And keep bugs out.
  • Do you have 🧒 or 🐶 ? Do they remember to close the door? Not your problem now, with your UnBugs door screen. With its magical closing powers, this hands-free screen door with magnets closes automatically: for pets & kids – and makes entry & closing a snap when your arms are full. Where has this been all your life?
  • 🔨 Now that you know you're ordering the right size for YOUR door, relax knowing installation is simple. You'll get everything you'll need to install it quickly on both wood or metal frames, including the optional safety tacks for extra strength, and the roll of hook & loop fastening strip. Just follow the quick video tutorial included, then enjoy your home like never before.
  • 🏆 Your new screen door is going to get a LOT of use. Your mesh door screen had better be this heavy duty version, which our customers have re-used from year to year. We're confident you'll love our products, and our "Bugs-Not-Invited" Guarantee assures your 100% satisfaction with our Lifetime Replacement Policy.
iGotTech Magnetic Screen Door, Full Frame Seal. Covers Doors up to 34 x 82 Inches MAX. (Item Size: 36 x 83)
Specs:
ColorBlack
SizeFit Door 34" Wide x 82" High
Weight1.15 Pounds
▼ Read Reddit mentions

🎓 Reddit experts on household doors

The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where household doors are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Total score: 8
Number of comments: 4
Relevant subreddits: 1
Total score: 7
Number of comments: 4
Relevant subreddits: 2
Total score: 6
Number of comments: 4
Relevant subreddits: 1
Total score: 6
Number of comments: 3
Relevant subreddits: 1
Total score: 5
Number of comments: 3
Relevant subreddits: 1
Total score: 4
Number of comments: 4
Relevant subreddits: 1
Total score: 4
Number of comments: 4
Relevant subreddits: 1
Total score: 4
Number of comments: 3
Relevant subreddits: 2
Total score: 4
Number of comments: 3
Relevant subreddits: 2
Total score: 3
Number of comments: 3
Relevant subreddits: 2

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Top Reddit comments about Household Doors:

u/Kairus00 · 3 pointsr/homeautomation

I would get the hub earlier on since you want to monitor your washer/dryer, and if you have the hub you can buy devices that work with your hub so you can control everything from one spot.

The easiest solution for monitoring your washer/dryer are going to be z-wave devices. For the dryer, if it's electric, a sensor to detect vibration, or if it's gas, you can maybe get away with an outlet that detects current. For the washing machine, usually an outlet that detects current can work for you. It can be a bit tricky to get going though.

Skip the wemo plug and go with a z-wave plug. Any reason for the Lutron dimmers in specific?

For the bathroom fan, I use a z-wave smart switch. I don't have it tied to a humidity sensor, but I have it set (controlled by my hub) to turn off after 25 minutes, that way I don't have to worry about turning it off when I'm in a rush to leave for work. If I wanted to have it triggered by humidity levels or motion, or whatever all I need to do is add another z-wave device and I can make it happen.

The RainMachine seems cool, but pricey for an irrigation controller, no? I use the Orbit B-Hyve and it works great. I rarely ever interface with it honestly. I pull out my phone and run the zones occasionally to check that I don't have any broken heads, otherwise it just runs. It can be completely controlled from your phone, and can be controlled directly from the device as well. The other day I adjusted my schedule a little bit and increased the runtime on a few zones. Is your irrigation controller inside? If not, with the RainMachine you will also need to buy an enclosure to keep it weatherproof, whereas the B-Hyve is built into a weatherproof enclosure.

For garage door automation, there is a great z-wave option on the market. GD00Z-4 that will integrate into whatever hub you get.

Now as far as hubs go, I wouldn't go Wink personally. SmartThings is a bit annoying but it is the most used system on the market and there are some perks to that. You'll see recommendations for running Home Assistant, and that's a solution that requires some tinkering. HomeSeer is great, and if I started over completely I probably would have gone this route, but I have a bunch of zigbee devices, and the recommended way for using Zigbee with HomeSeer is to use another hub (Lightify Hub), and I don't really care for that solution. I'm using Hubitat now, it's an early product and I've had my frustrations with it but I like to tinker so it works for me.

u/JrClocker · 2 pointsr/SmartThings

SmartThings Version 3 Hub (I have the Version 2 Hub...you will have to look around for this one):
https://www.amazon.com/Samsung-SmartThings-Generation-GP-U999SJVLGDA-Automation/dp/B07FJGGWJL/ref=sr_1_1_sspa?ie=UTF8&qid=1540989501&sr=8-1-spons&keywords=smartthings+hub+2nd+generation&psc=1

GE Z-Wave Plus On/Off Light Switch:
https://www.amazon.com/GE-Repeater-Required-Works-SmartThings-14291/dp/B01M1AHC3R/ref=sr_1_3?ie=UTF8&qid=1540989582&sr=8-3&keywords=z-wave+switch

GE Z-Wave Plus Dimmer Switch:
https://www.amazon.com/GE-Repeater-Required-Works-SmartThings-14291/dp/B07361Y54Z/ref=sr_1_3?ie=UTF8&qid=1540989582&sr=8-3&keywords=z-wave%2Bswitch&th=1

GE Add On Switch (if you have a 3-way or 4-way switch):
https://www.amazon.com/GE-Bluetooth-Wireless-STANDALONE-12723/dp/B00RKJS8MQ/ref=sr_1_3?ie=UTF8&qid=1540989718&sr=8-3&keywords=z-wave+add+on+switch

ZigBee Motion Sensors:
https://www.amazon.com/gp/product/B07F8ZHBLS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

ZigBee Door Sensors:
https://www.amazon.com/gp/product/B07F956F3B/ref=oh_aui_detailpage_o01_s00?ie=UTF8&th=1

ZigBee Leak Sensors:
https://www.amazon.com/gp/product/B07F951JDP/ref=oh_aui_detailpage_o01_s00?ie=UTF8&th=1

ZigBee Outlet Plug (you will need to replicate your ZigBee mesh, I use to motion activate lamps, turn lamps on/off at sunset/sunrise, etc.):
https://www.amazon.com/gp/product/B07F96JB63/ref=oh_aui_detailpage_o01_s00?ie=UTF8&th=1

Z-Wave Thermostat:
https://www.amazon.com/gp/product/B005EJ7YO2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

ZigBee RGB Landscape RGB LED Strips:
https://www.amazon.com/gp/product/B00R1PB2ZY/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

ZigBee RGB Lightbulbs:
https://www.amazon.com/gp/product/B073ZBYXKQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Z-Wave Deadbolt:
https://www.amazon.com/Kwikset-SmartCode-Electronic-SmartThings-featuring/dp/B004F1B24I/ref=sr_1_12?s=hi&ie=UTF8&qid=1540990126&sr=1-12&keywords=z-wave+lock

Z-Wave Garage Door Opener:
https://www.amazon.com/GoControl-Linear-GD00Z-4-Z-Wave-Controller/dp/B00M75TEIU/ref=sr_1_4?s=hi&ie=UTF8&qid=1540990160&sr=1-4&keywords=z-wave+garage+door+opener

Sonos One Speakers (Great music, and talking through SmartThings):
https://www.amazon.com/gp/product/B074XN1LH3/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Amazon Echo Show (for Voice Control...an Echo Dot will work just fine too):
https://www.amazon.com/All-new-Echo-Show-2nd-Gen/dp/B077SXWSRP/ref=sr_1_1?s=electronics&ie=UTF8&qid=1540990254&sr=1-1&keywords=echo+show

That's about all I can think of at the moment.

If you are going to do this, do it in stages. Z-Wave and ZigBee are mesh networks...meaning that the reliability of the network gets much better the more devices you have. Also, with these mesh networks:

  • Battery operated devices DO NOT reinforce the mesh
  • The only devices that reinforce the mesh are devices that are always powered from the mains

    I see so many people complaining about how the Z-Wave or ZigBee devices don't work, when they are relying on too many battery operated devices.

    For Z-Wave devices, choose Z-Wave Plus over Z-Wave...it's the newest standard, and has much better range.

    In the US, Z-Wave operates in the 900 MHz spectrum and ZigBee in the 2.4 GHz spectrum. Personally, I "prefer" Z-Wave devices as there is a lot of "junk" in the 2.4 GHz spectrum right now. However, the ZigBee devices are operating reliably as I have a strong mesh setup (with non-battery operated devices).

    Two great application for the Leak Sensors:

  • Near your hot water heater (when they go, they always leak)
  • Under your A/C drip pan (if you have central air)

    Great applications for door open/close sensors:

  • Turn closet lights on/off when the door opens or closes
  • Turn on entry and hallway lights when an entry door opens, but only when it's dark (30 minutes before sunset or after sunrise)...turn off 1 minute later
  • Notify me when my gun safe is opened

    Great Application for Motion Sensors

  • Turn on outside ceiling fans (but only if the temp is above 72 degrees)
  • Turn on lamps while motion is active when it's dark

    The motion sensors I linked above are the new ones...the magnetically mount. What's cool is that the magnet is in the sensor, and it's strong enough to attach the sensor to a dry wall screw (no need to mount the adapter bracket).
u/alexlfm · 1 pointr/winkhub

OK so my favorite accessory is, by far, the garage door opener and sensor system. It closes my door automatically at night if I forget and leave it open, and sends me notifications when it's left open during the day. Plus as I have the lights controlled, it turns on my main garage lights when I come home at night. https://www.amazon.com/GoControl-Linear-GD00Z-4-Z-Wave-Controller/dp/B00M75TEIU

Secondly, I know it's not a switch but I also love the Schlage connect lock. This was the first "smart" device I ever got, well before I had Wink. It's amazing as with remote start cars, and this, I now never have to touch my keys, and it works great for letting people in with temporary codes when you're on vacation. Plus when I go for a run I don't have to carry my keys. It integrates fantastically with Wink letting you set codes, lock door, change settings, etc. I actually only bought the Wink hub because of it since I wanted an easier way to program/control it (well, that and the fact that when Quirky went under Meijer was selling the hub for $5 and the controlled power strips for $10. No lie.) https://www.amazon.com/Schlage-Connect-BE469NX-Touchscreen-Deadbolt/dp/B00AGK9KOG/ref=sr_1_2?s=hardware&ie=UTF8&qid=1479481619&sr=1-2&keywords=schlage+keyless+lock

As for switches, I tend to prefer the Leviton ones as they are the cleanest looking, don't have obnoxious lights (like the GE ones) and are reasonably priced. I only have one Caseta switch, and while it works fine, I just don't know that I care for the style. (On a side note, the Caseta remotes can work for any Wink device if you set up shortcuts for the various buttons). The annoying thing with the GE switches is that you have to push up to turn it on and down to turn it off. While I know that sounds like a silly complaint since physical switches work that way, it's something you have to think about since it doesn't stay up or down, and instead is always in the middle. I have the same complaint with the separate buttons on the Caseta switches. This is another reason why I like the Leviton ones. Only one button which simply toggles the state.

Finally, all the Z-Wave switches work independently of the hub and will ALWAYS respond to your physical commands immediately, regardless of hub or no hub. They are always a physical switch first and remote second.

u/ragingcomputer · 1 pointr/homeautomation

My comment was really targeted toward OpenHAB. If you're running Wink, I think you'd be better off getting one of these GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener. Amazon reviews are pretty solid and Home Depot was selling them for use with Wink for a while. I believe it comes with a tilt sensor, which is probably easier to use than boogering a regular door sensor on like I did. Probably a solid bet. I would have bought one of these if OpenHAB supported the z-wave barrier class.

As far as the MIMOLite... I can't tell you for sure as I run OpenHAB, but it looks like it should work according to these links: post in reddit /r/homeautomation and Amazon review

I'm using a Go Control / Nortek Controls / Linear WADWAZ-1 to sense my garage door. I snagged one of the WNK01-21KIT kits from Home Depot on sale.

I've also got a Honeywell Ademco 958 overhead door contact on my other door that should work as the door contact listed in fortrezz's diagram linked in my previous comment, if you wanted to sort of wire it.

For Wink, by the time you buy both the mimolite and the door contact (wired or z-wave) you might as well just buy the go controls device and get the benefit of secured z-wave barrier class.

u/colinnwn · 1 pointr/homeautomation

Just as a point of comparison, I have a 2005 Craftsman garage door opener and just purchased this MyQ upgrade kit (this is not the generic one for any opener).

http://www.amazon.com/dp/B00IPKPVCE/

It works great, the MyQ app is very nice aside from having to sign back in after several days, and the integration with Wink has been flawless (compared to some of the other Wink features).

I can't remember the last time I've been as happy with a technology purchase. I didn't want to have to rig something together that required frequent maintenance, or have it not be integrated with the opener and require a sensor with a battery like the generic MyQ adapter, Wink Ascend, or some others.

It does seem Chamberlain is willing to partner with other companies to allow them to link into it such as Staples Connect is supposedly working on. Though if you want integration with a specific HA controller, obviously I wouldn't buy the kit until the integration exists. Most of these companies add features at a snail's pace.

u/ImaginaryCheetah · 1 pointr/homeautomation

not after a quick search ( ,_,)

seems like all of the "smart home" products are 15amps

off the top of my head, you could accomplish the same goal using a relay board and some RIBs

https://www.amazon.com/dp/B071KFX63R/

https://www.amazon.com/dp/B000LEUJU6/

but you're venturing towards a rabbit hole of how complicated/expensive do you want this to be :)

maybe someone else knows of a 20amp smart switch, for an elegant solution.

u/FirstChairStrumpet · 4 pointsr/airbnb_hosts

Check out myQ technology...it may be compatible with your existing opener. I bought this device and it was super easy to install. If others install the app they should be able to open it. I imagine as owner you could manage access like one would a digital lock and remove access after their stay.

At the moment I currently don’t allow guests access to the garage but I use this for peace of mind when I’m away. I can check status and see if it’s open/shut and for how long. I can open and close it remotely...heck I use it when I’m up on the 3rd floor and about to go to bed and don’t feel like going all the way downstairs to make sure it’s shut. Easily one of my favorite home automation devices!

u/sonnaps · 1 pointr/homeautomation

Ok cool, so there really isn't anything out there that I was missing. Something like this should work, too, right?

MHCOZY WiFi Wireless Smart Switch Relay Module for Smart Home 5V 5V/12V https://www.amazon.com/dp/B0752P57ZG/

I would have to use the eWeLink app on my phone and IFTTT to make things talk to one another. I wish there was a Smart Life (Tuya) dry contact sensor or switch to use. I already have a bunch of their smart plugs and would have rather used the same Smart Life app that I am used to.

u/p04s22l72 · 2 pointsr/HomeKit

To add more detail to what u/mwwalk pointed out, you can install homebridge (https://github.com/nfarina/homebridge) on a raspberry pi and use the homebridge-chamberlain plugin (https://github.com/caseywebdev/homebridge-chamberlain#readme). This is a lower cost alternative to purchasing the MyQ Home Bridge ($97 on Amazon) but requires a level of comfort in using an rpi and linux command line.

Raspberry pi homebridge helps to add non-HomeKit accessories into HomeKit. At some point in the past, Chamberlain/LiftMaster did not have a HomeKit option.

My garage door opener setup is not exactly the same as yours... I have a non-WiFi Chamberlain but added a MyQ Smart Hub (https://www.amazon.com/gp/product/B075H7Z5L8) purchased on discount for $20 to add in WiFi capability.

I've linked in my Ring cameras, Plex, and other stuff as well, so this approach with rpi homebridge was greater value for the time, money, effort.

​

edit: fixed the link to the chamberlain plugin

u/klinquist · 0 pointsr/homeautomation

As far as light bulbs, there are lots of places to start. If you want to replace bulbs themselves, look at LIFX or Hue. They both offer either color or white bulbs and an API that lets you dim/adjust color/etc via your phone.

Alternatively you can replace your light switches with ZWave switches (about $40ea) that you can hook to a ZWave controller (ZWave is a wireless protocol that a lot of HA devices use. Zigbee is another).

As far as a ZWave controller, I still personally like SmartThings ... although there are other options. OpenHAB+Aeon ZWave USB stick is more of a 'roll your own' setup. Wink, Abode, and Vera are other options.


As for your garage, once you have SmartThings or another option listed above, this will do the rest of the work for you:
http://www.amazon.com/GoControl-Linear-GD00Z-4-Z-Wave-Controller/dp/B00M75TEIU

For #3, Sonos is the most expensive but best option.

For #5, You can go Nest, Ecobee, or a number of the great ZWave thermostats if you have a Zwave controller.

u/equis55 · 1 pointr/HomeImprovement

This is the one I bought on prime day for $25, pretty awesome so far, you can even set schedules and alerts. App Pretty user friendly and it was easy to set up.

u/luvche21 · 12 pointsr/landscaping

If you want a super quick and cheap upgrade to the garage door, get a set of these magnetic door accents.

They're cheap and easy to install (they're magnets, so just pop em on), and they look nice on that style of garage door (that's the same style we have). I put mine on almost 2 years ago and other than my toddler moving the handles once, they've been awesome.

Oh, and for that size of garage door, a single pack of those is enough - doing the double pack setup like they have pics of on the product page looks a little silly IMO.

u/jimbo333 · 2 pointsr/garages

Sorry for being so late, but if you have Z-Wave in your automation already, then Z-Wave garage door openers are under $100, like this one: https://www.amazon.com/GoControl-Linear-GD00Z-4-Z-Wave-Controller/dp/B00M75TEIU/ref=sr_1_1?ie=UTF8&qid=1491329589&sr=8-1&keywords=ZWave+garage+door+opener. Is the one I have, it has sensors that tell you if it is open or closed, and then you can use your phone (via z-wave controller) to close/open it. Works well for me. With my z-wave controller (Vera), I have it setup to notify me if I am not home and the door is opened, or left open.

There is also various WiFi options, which also allow you to control it, like this one: https://www.amazon.com/Chamberlain-MYQ-G0201-MyQ-Garage-Controls-Smartphone/dp/B00EAD65UW/ref=sr_1_1?ie=UTF8&qid=1491329677&sr=8-1&keywords=wifi+garage+door+opener. No personal experience with those, but if they support your opener, are probably a good option.

If DIY is more your thing, a Arduino and a simple switch on the track somewhere would work for notifying if it is open.

u/hunterstee · 2 pointsr/SmartThings

Hi Mike! There used to be a 3rd-party device handler for Chamberlain MyQ openers, but it seems that it has been discontinued: https://community.smartthings.com/t/discontinuation-of-myq-connect-community-smartapp/47183

Another option is to use the GoControl unit that connects to your existing garage door opener: https://smile.amazon.com/GoControl-Linear-GD00Z-4-Z-Wave-Controller/dp/B00M75TEIU. It has native integration with ST as well as options for third party device handlers that extend the functionality. The price on Amazon is a bit high right now, but I've seen it around $65 in the past. If you're not in any hurry, use camelcamelcamel.com to track the Amazon price and notify you when it decreases or hits a target price you configure.

I can't help much with the camera portion of your question, but I'm interested to see what others have to say as well. This is something I'm still deciding on also.

u/Piratesfan02 · 1 pointr/HomeImprovement

I got the chamberlain whisper drive with wifi. I love that I can check to see if it's open, closed or even alert me when it does either. It comes with a battery backup too. I love it. My parents got it and love it too!

It took me 3 hrs to install and it syncs with the Nest for the home/away.

Edit: Added more stuff

https://www.amazon.com/gp/aw/d/B013UGZYOM/ref=mp_s_a_1_2?ie=UTF8&qid=1498961928&sr=8-2&pi=AC_SX236_SY340_QL65&keywords=chamberlain+garage+door+opener&dpPl=1&dpID=41rYyO2QJ8L&ref=plSrch

u/mattttko · 1 pointr/DIY_tech

Wow thank you so much, this was very helpful. :)

​

If i am understanding you correctly, this is the new diagram (https://imgur.com/a/Y6XohGa).

  1. Use the red and white power lines from the wall and connect them to this buck converter.
  2. Configure the buck converter to change the voltage from 16 volts to 5 volts.
  3. Connect wires from the buck converter to this bridge rectifier to convert the power from AC to DC.
  4. Connect the wires from the bridge rectifier to the two power ports on the WiFi Relay
  5. Solder the wires from the relay on the Wifi Relay to the two pins that activate the buzzer
  6. Voila! :D

    ​

    One question I had was can I use the existing red and black lines to power both the original unit and the buck converter/bridge rectifier/wifi relay? Would i just cut off some of the plastic coatings of the black and red wires somewhere in the middle and wrap the other wires around the two?

    My thinking is that this would effectively make two "ends" for the wires that i can use to power the existing circuit board and the buck converter/bridge rectifier/wifi relay.
u/AviN456 · 6 pointsr/homeautomation

If you have a Chamberlain or Liftmaster (or compatible) garage door opener, you can install the LiftMaster MyQ Retrofit Package to add smart capabilities.

This enables you to see the state of, and control, the garage door via their website, mobile app.

It also works with certain 3rd party integrations, such as Wink and Nest, to control the door, alert on events, and initiate actions based on the door status. For example, you can have your Nest go into home/away mode, or have lights turn on/off, locks open/close, etc., based on the door opening or closing.

You can set up rules to notify you if the door is opened/closed and/or left open/closed for set periods of time. I have mine set to send an alert on the door opening and another alert if it's left open for 5 minutes.

You can also set (locally, on the control panel) the door to automatically close after 1, 5, or 10 minutes.

For safety reasons, you can't officially automate the opening or closing of the door, although there are some unofficial ways to use the API for this.

u/haven_lock · 3 pointsr/homedefense

So one thing to keep in mind is that the weak point of a door lock is actually the door jamb. When someone kicks in the the door, they usually don't break the door, they break the strike plate out of the door jamb. The deadbolt is then blasted out of the strike plate.

I am not a locksmith nor have I used this specific product. But after looking at it and the install video, I am not sure how this lock will prevent a break-in via kicking in the door. This lock is secured into the door jamb and therefore it is only as strong as the door jamb. It uses 3 inch screws into the jamb so that is better than normal, but if the jamb is made out of cheaper wood, the screws will probably blast out of the jamb if kicked in repeatedly.

If you wanted to go the cheapest route to increase your door security, reinforcing your door jamb is probably the way to go. Something like this https://www.amazon.com/Door-Devil-Home-Doorframe-Reinforcement/dp/B00ZGUMLZQ/ref=sr_1_1?s=hi&ie=UTF8&qid=1478113478&sr=1-1&keywords=door+devil

The advantage of Haven Mech is that it is secured into floor. So it uses the strength of the foundation to secure the door. It also has been designed from scratch to take dozens of kicks. What we found in our R&D is that a lock that doesn't have any give will fail quickly. Our original design was a steel bottom and steel top. It had no give, and it failed after about 10 kicks. Once we redesigned the lock out of hard plastic and the insides were woven nylon, the lock gives and bends a bit every time someone kicks it. That give allows for the door to take kick and kick without major damage.

u/LouDiamond · 2 pointsr/AirBnB

so a coded garage door (one that we can easily multi-program), plus specific keys for the actual apartment door-door.

that's kind of what i was thinking, i just want sure how to best do the garage door as an entrance.

probably easiest to do a key-chain garage door opener + key, like this

u/Christopher3712 · 1 pointr/amazonecho

I use Nexx Garage door opener. You command would be, "Alexa, Ask Nexx Garage to open door one." Alexa would ask you for your 4-digit PIN, to which you respond and then the door opens. You can set a virtual proximity fence that allows the door to open upon your arrival. It will alert you if your phone is away from the home for longer than a certain period of time and the door's still open. At that point you can just tap the button to shut the door. I'm happy with it because I rarely use the voice-activated function. I was more concerned with being able to remotely close it and being able to see the status. The proximity open was just a bonus. It always feels cool to come home.

u/SanDiegoDude · 3 pointsr/alexa

I spent some time researching this, and ended up getting a z-wave garage door opener off Amazon (this one). It works well, communicates over Z-wave and reaches through several walls to my Z-Wave light switches to join the Z-Wave mesh my SmartThings hub communicates with - With that said, I found out rather quickly afterward that Amazon purposely prevents Alexa from working with any type of smart door/locking mechanism, which made me sadface. I could probably still get it to work through Smart Things custom scripting editor, but honestly I'm fine just doing it through the ST app.

u/NinjaCoder · 2 pointsr/HomeImprovement


If you really want to make something, then please by all means do so. It will be a learning experience, and pretty fun. It is unlikely you will save a significant amount of money, but the geek factor is HIGH.

However, the MyQ system from Liftmaster is dead simple to install and use. I've had pretty good luck with it. Here it is for $70.

u/ShiningSquirrel · 1 pointr/pcmods

https://smile.amazon.com/gp/product/B07PV84NCR

Install by tapping in to the wires going to your PC switch. Set for momentary, download the app and your all set. FYI, you use the app to configure it, but you can use a smart speaker to control after it's configured. You can also turn it off and on via voice if you have a smart speaker like an Echo. BTW, when you activate it, if the PC is already on it will turn it off. For just a phone without a smart speaker, just search for wake on lan.

u/AutoModerator · 1 pointr/HelpMeFind

Thank you for your submission, please remember to supply as many details you can.

These include, if applicable: size, origin (store and/or geographic location), age, and any writing on the item. Additional pictures can be added as a comment in this post.

Whatever you've googled/found already should be included to save time and effort.

Thanks.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

u/bachewie · 2 pointsr/homeautomation

Nexx Garage Door opener. Has support with GH...eg. setup up routine so I don't have to ask to talk to Nexx Garage. Also their customer support was top notch when I had a question about compatibility.

NEXX Garage NXG-100 Nxg Remote Compatible Door Openers-Control Using Smart Phone, Amazon Alexa and Google Assistant Enabled Devices, White https://www.amazon.com/dp/B01J8JI9HY/ref=cm_sw_r_cp_apa_htbJBb35YC8JN

u/tri-crazy · 1 pointr/homeautomation

You could look into a RaspberryPi and the Pi version of the HomeSeer controller software. If you have a little time the software plus a Pi only costs a little more than a SmartThings. Otherwise I use SmartThings and I have really liked it so far.

As far as switches if you do not mind mixing brands this is what I do. Anywhere I have a dimmer, a 3+ way switch, or have the need for scenes I use HomeSeer. If I just have a regular switch I don't need to do anything fancy with I use GoControl switches as they are a bit cheaper if you look at the other sellers.

For the garage I use GoGoGate because I wanted to ability to give others access. I have seen others on this sub use these GoControl Garage Openers with contact sensors to verify open/closed.

I would also look into doing fan control

Depending on the size of your house and how many switches you are replacing this could get you pretty close to your $1k budget. You may need to add cameras later on. Also in your future endeavors I would look into EcoBee/Nest for temperature control.

u/eagle101 · 1 pointr/HomeKit

Can someone please help me?

I have the following garage opener: Chamberlain WD1000WF 1-1/4 HPS Wi-Fi Garage Door Opener https://www.amazon.com/dp/B013UGZYOM/ref=cm_sw_r_cp_api_pgfJzbNESY9AX

If i want to add homekit to it, do I buy only this new device or something else as well?

Thank you

u/squirrelpotpie · 2 pointsr/AskElectronics

From what I can tell reading up on the types that use 10-position switches and operate on 300mhz, you should be safe with pretty much any universal garage opener that:

  • Operates on 300MHz
  • Has a DIP switch with exactly 10 digits

    Should be easy to find one on Amazon, or anywhere. I like the key-ring size ones. Roommate got one of these (except the version that works for our door) and it works great. It arrived with a dead battery though, so he ended up having to replace that, but even if that happens to you too it's still way less than the $50 your landlord wants for it.

    From reading wikipedia about garage opener tech, the DIP switch types haven't really changed since the 90's. So there shouldn't be any surprises in the switch-containing types.

    Edit: And yes, that's what you do. Copy the switch positions and it should just work. If it doesn't, double check that the switch positions (left vs. right, and up vs. down) are the same on the new remote. Could be the first digit is on the right instead of left, or that down means 'on' instead of 'off'.
u/egoods · 6 pointsr/homeautomation

Thought I would share since this is a pretty recent development, and I was about an hour away from installing this at my vacation rental property... For those interested, The GoControl z-wave garage door opener will work with a Smart Things hub and is officially supported.

Pretty pissed that I won't finish the automation install at this house this weekend but really glad I didn't was a whole bunch of time installing this!

u/tanmaker · 3 pointsr/homeautomation

Funny, I just got an email from Liftmaster/Chamberlain in regards to a myQ update implementing a new feature, looks like it's called Family Share. It looks like you'll be able to add people so they can control the door through the app, and then you can remove them when they're done.

If you just have 1 garage door, this kit should get you going.

u/SolusOpes · 8 pointsr/preppers

Door Devil is a must.

A deadbolt into a wood frame makes the wood at the point extremely thin.

Next I like 3M window security film.

Here's a video of it in action.

You can get cheap security film off Amazon. But I personally tested what's sold from China, and the cheaper American made stuff. And I'm telling you, find a retailer, and spend the money on the 3M.

Battery operated cameras are also good. I like Arlo wireless cameras. No drilling or wires. And while yes, you have to use their cloud for storage, there's scripts you can either write yourself or download online, which will log in, download your videos local and delete them from the cloud every 24 hours, or 1 hour. Whatever you want.

If you set them to motion detection the batteries last around 6 months.

u/haworld · 2 pointsr/homeautomation

Amazon had the garage door sensor but its now unavailable, they are the only seller currently, but we will have it available on Amazon Prime in a couple weeks. We have a few units coming in today so once we get the listing complete, it will be available there in our store.

We will have the other items as well, we ordered yesterday but it may be a week or two for them to get in, Linear is pretty slow shipping.

u/SkittlesX9 · 2 pointsr/homeautomation

All good man. There is this also. GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller, Small, Black https://www.amazon.com/dp/B00M75TEIU/ref=cm_sw_r_cp_apa_FxyTzb8594QSS

Good luck either way

u/Ir0nRaven · 1 pointr/funny

I bought and installed this for my dad. Highly recommend - you can view status and control door from your phone. Easy all around. I'm sure there are similar front door locks to do similar.

meross Smart Wi-Fi Garage Door Opener Remote, APP Control, Compatible with Alexa, Google Assistant and IFTTT, No Hub Needed https://www.amazon.com/dp/B07L5DPK8P/ref=cm_sw_r_cp_apa_i_YuDxDb7RVMM2N

u/6843513514 · 2 pointsr/amazonecho

Is the smart garage door opener you listed any different than buying an the smart upgrade kit for current openers?

Something like this?

https://www.amazon.com/Chamberlain-CIGCWC-Internet-Smartphone-Connectivity/dp/B00C1CF1S6/ref=sr_1_5?ie=UTF8&qid=1484141777&sr=8-5&keywords=myq

u/DesignFlaw06 · 2 pointsr/homeautomation

If you want something to work with the Wink Hub, you can go with a GoControl Z-Wave Add-on. https://www.amazon.com/GoControl-Linear-GD00Z-4-Z-Wave-Controller/dp/B00M75TEIU You can add it to any garage door you'd like. I installed mine, using a SmartThings hub, and it seems to work pretty well.

u/natemac · 1 pointr/smarthome

They had them on sale at walmart, Amazon & Best Buy this week for $30 and we picked one up for a friend of mine and worked instantly.... maybe its a faulty device.


https://www.amazon.com/Smart-Garage-Opener-Chamberlain-MYQ-G0301/dp/B075H7Z5L8/ref=sr_1_1_sspa?crid=3PYXX79JVZY06&

u/wardy7678 · 2 pointsr/homeautomation

These are great EACHEN WiFi Wireless Inching Relay Monentary/Self-Locking Switch Module DIY Smart Home Remote Control DC 5-32V AC90-260V Ewelink App iOS/Andriod Compatible with Alexa Echo Google Home IFTTT (ST-DC1)

relay board with Wi-Fi

u/SurfNC02 · 3 pointsr/homeautomation

You have a lot of options. Easiest would probably go with a hub like a Samsung SmartThings hub and get zwave door/window sensors.
For the garage door you could use the GoControl outfit kit https://www.amazon.com/GoControl-Linear-GD00Z-4-Z-Wave-Controller/dp/B00M75TEIU

The fireplace gets a bit tricky depending on how the control is. Most newer homes with gas logs are on a milivolt system, meaning the switch on the wall that opens the gas valve doesnt actually have power, its just a signal wire. For this case you need to get power to that switch location which could be as easy as tapping into the lines of an adjacent switch. You need a Zwave dry contact swtich. https://www.amazon.com/Remotec-Zwave-Contact-Fixture-Module/dp/B00913ATFI

u/burning-sky · 4 pointsr/AnneArundelCounty

Overhead Door is the only company that comes to mind for any reputable company in the area. You can actually mod an existing garage door to do different things. I found some resources from Amazon a while back. I have a LiftMaster, so I saved this stuff for myself. I'm sure that you can find easy solutions similar to this. Greetings from Hanover.

Liftmaster 888LM Security+ 2.0 MyQ Wall Control Upgrades Previous Models 1998 (and later) https://www.amazon.com/dp/B00B8BFG0O/ref=cm_sw_r_cp_apa_i_ebl1DbZCCAZZ0

Chamberlain/Liftmaster Cigbu Internet Gateway For Myq Technology Enabled Garage Door Openers https://www.amazon.com/dp/B00B7CDSQ8/ref=cm_sw_r_cp_apa_i_bcl1DbM8CD8JJ

u/Durnt · 2 pointsr/homeautomation

If you are a diyer you could use a nodemcu(ESP8266) https://smile.amazon.com/KeeYees-Internet-Development-Wireless-Compatible/dp/B07HF44GBT/ref=sr_1_4?keywords=nodemcu&qid=1575090035&s=electronics&sr=1-4

+ quad relay board(https://smile.amazon.com/Huayao-Channel-Optocoupler-Arduino-Raspberry/dp/B07DN8DTRW/ref=sr_1_1_sspa?keywords=3+channel+relay&qid=1575090005&s=electronics&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyNzVXTkU1VFE4MkZKJmVuY3J5cHRlZElkPUEwNjMzMDI3MVczRDJDUzk2NzQ2UiZlbmNyeXB0ZWRBZElkPUEwNDEwODgzMkgySFREVTBEU0VRJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==)

+ project box and some wires

Both the relays and the nodemcu power off 5v so you could just use a cell phone charging brick to power them. You could have it controlled via a lightweight webpage or you could just have the phone use REST API to send messages to trigger the open/closed/stop.

​

​

EDIT: Or more simply, 3x https://smile.amazon.com/MHCOZY-Wireless-Switch-applied-control/dp/B0752P57ZG + ewelink app. Personally I am more of a fan of the DIY opinion as I like local control without phone home worries

u/butterona_poptart · 1 pointr/Ring

I’d love to see Ring certify wireless in door sensors like these. I have monitoring so it’s not an option, but for self monitored maybe someone can confirm if they work?

Aeotec Recessed Door Sensor Gen5, Invisible Z-Wave Plus security and open / close sensor, Battery powered https://www.amazon.com/dp/B0151Z49BO/ref=cm_sw_r_cp_api_i_IsahDbKZMR709

u/Infernal7 · 2 pointsr/homeautomation

Which MyQ system do you have?
Ceiling Mounted
or
Wall Panel

With the wall panel version you can set an auto-close timer right on the wall panel.
I had originally bought the ceiling mounted one myself but found it wasn't reliable and lacked this feature. I switched to the wall panel one and it works much more quickly and has the auto-close timer. Much easier to install as well. If you have the ceiling mounted one I would return it and switch if it isn't too late.

u/Twizik · 1 pointr/winkhub

I looked into the GoCOntrol briefly and I'm not sure why I passed it by. I have other GoControl peripherals that I like. Is THIS what you are talking about, it is the same price as the Chamberlain setup.

Edit: I remember why i passed this up. I had read people were having issues with the sensor, it doesn't know that it is up or down just that the door moved so if for some reason the laser gets tripped you cannot tell that the door went back open during its attempt to close. This may be incorrect information, I'd love to hear your take. Also I bought the Chamberlain for myself, each of us has 1 large 2 car garage door.

u/Noob911 · 5 pointsr/homeautomation

This one works great for me. I have it set to remind me if the garage door is left open longer than 15 minutes during the day, or if it is open at all after bedtime. it will auto close at certain times of the night, and when I set the house alarm...

u/legendtuner · 3 pointsr/homeautomation

I have almost the same opener as you. I wanted something simple to allow remote open/close and notifications if it's been open. I didn't really want the complexity of SmartThings so I went with the Chamberlain Gateway. It works great and you can setup custom push notifications that notify you through their app.

u/troyhakala · 1 pointr/googlehome

You can open and close the door with your voice right now. Here's my review I posted on Amazon (other reviews):

It works, so I give it 3 stars. But it’s got a lot of problems.


The iOS app is quirky so anything other than opening and closing the door is weird and confusing to figure out. Giving my wife access to controlling the doors with her app requires figuring out totally undiscoverable UI. And it doesn’t look like iOS or Android so I don’t know what they’re going for design-wise. Fortunately, the Google Home integration is pretty good so I don’t use the app much. I can open a door by asking Google Home to do it while I’m walking through the kitchen and out to the garage and it’s open by the time I need to drive away.


The Apple Watch app doesn’t work at all. It always says it is “authorizing” but never gets authorized. They call it a “Beta” so maybe they’ll get it working eventually but it’s been this way for a year or longer.


The magnet and sensor have awkward designs and need to be so close to each other it’s difficult to mount them without the garage door breaking them. On one door I could mount them on the vertical side of the door so the magnet slides into place next to the sensor so there’s no risk of them hitting each other. But I had to mount them on the top of my other door and the angle the door comes down makes the clearance very tight and one open/close too many and they hit each other and snapped the sensor off. I broke 3 of the 4 pieces on the 2 Nexx Garage kits and had to mount them in a makeshift way with strong (3M VHB) adhesive tape and will probably be remounting them every 6 months as the adhesive wears out. It’s good that they fail safe – it makes you think the door is open when it’s not rather than the other way around.


They give you only enough wire for a straight line connection between the sensor mount location and the opener. I couldn’t do a straight line on one of my doors so I had to splice in wire to lengthen it. Wire is cheap, they should provide a longer length.


The double-sided tape on the unit for attaching it to the opener is weak and in just a few weeks one of mine came off and was dangling by the wires. More tape to the rescue.

​

​

​

u/amirandap · 1 pointr/homeautomation

>https://www.amazon.com/dp/B0752P57ZG/ref=cm_sw_r_cp_api_i_Hyk1BbSPGZBWT

The whole web interface got scrapped because developer quit on me, it works but i wasnt happy the way it looked or the way it worked just in case heres the link:

Dashboard | GPIO Server

EDIT: They are private, when i get home i will make them public

​

I also uploaded the code im currently using for Homebridge (Siri Video Intercom), Home Assistant (tablet mounted interface), Telegram (voice recording of visitor) for another reddit user here it is:

Smart Telegram Intercom

My first time actually sharing my code so just send me a DM if you need any explaining or help setting up

u/bloodytemplar · 2 pointsr/homeautomation

By "GoControl," I think you mean this? GoControl sells several Z-Wave accessories that are actually just rebadges of Linear, not just the garage door openers. :)

I have two of those, those mine are the "Iris" branded ones from Lowes (again, same manufacturer - Linear). They look like this in the app. Tap the green icon, they open and the icon turns yellow. Tap the yellow icon, they close and turn green. They can be controlled by SmartThings monitoring, CoRE, etc. There's actually a "Door Opener" device type that they register as.

Does that answer your question?

u/tommctech · 3 pointsr/homeautomation

I've been using Meross, which goes on sale pretty frequently on Amazon. It works well and has Alexa integration.


https://www.amazon.com/meross-Smart-Control-Compatible-Assistant/dp/B07L5DPK8P

u/mareksoon · 2 pointsr/winkhub

I'd think those would both work (haven't used them), but given Wink recognizes them as garage door openers they will limit operations that let you schedule/trigger door openings.

However, since you have a MyQ opener, I wouldn't get the Chamberlain controller you linked; that's to convert non MyQ doors to MyQ. Your current opener already has MyQ, so if you go the Chamberlain/Liftmaster route, just get the Internet gateway others have listed.

... nor the GoControl. Those both have the door sensor that detects if door it open or closed; your MyQ opener already has that intelligence.

If I wasn't clear (or confused you), the Liftmaster/Chamberlain Internet gateway WILL integrate with Wink; Chambrlain/Liftmaster and Wink just place restrictions on what you can do with it security-wise. I think Wink places those restrictions on most, if not all devices it recognizes as a door opener. Alexa does, at least.

The MIMOlite, I've heard, will get you around that, because Wink doesn't know what it's actually controlling.

... but the MIMOlite, alone, doesn't provide a sensor to tell you if the garage is currently open or closed. A ZWAVE sensor designed to detect angular changes, such as this, would work (but I don't know if that one is supported by Wink)

u/ryanborstelmann · 5 pointsr/homeautomation

So I just built a new house, and the builders installed a MyQ-compatible motor (has the little MyQ logo on it). In this case, all one would need is this.

If your garage door is NOT MyQ-compatible, one would need this instead. This option is able to control non-MyQ garage doors. From Amazon: "MyQ Garage works with most major brands of garage door openers made after 1993. Compatibility is based on whether existing garage doors and openers are equipped with adequate safety features, such as sensor eyes. For more information about compatibility, visit Chamberlain.com/MyQGarage"

u/joe100su · 2 pointsr/nfl

nice, that's a good one. also, found the wifi garage door switch

u/BornOnFeb2nd · 1 pointr/DIY

Gotta love the X-10... however I've found those sensors to be....frustrating, to put it nicely.

You might try something like this wired into this (if you can find one)..Thinking alone the lines of a few well placed mirrors, some beers and plenty of cursing, you could make "tripwires" for the animals, rig up a delay on turning it off, and voila. No more random ropelights as you walk on the deck.

u/beepee123 · 2 pointsr/homeautomation

My cheap/old garage door opener (Genie screw drive) has a bunch of exposed screw terminals for switches. One terminal opens/closes the door, one terminal toggles the light. They will work with any pushbutton switch, so anything that could drive a relay would work.

The door position sensors are just open/closed switches as well, so it would be really easy to wire it to anything that has a few i/o pins.

... so yeah anyway just get something like this and check the compatibility list:
http://www.amazon.com/Linear-GD00Z-4-Z-Wave-Garage-Controller/dp/B00M75TEIU

u/hoanghuy · 1 pointr/homeautomation

Meross Smart Wifi Adapter https://www.amazon.com/exec/obidos/ASIN/B07L5DPK8P/ is a whole lot better than Myq g0301. It's currently $20 OFF applied at checkout too, so it's $30 total with Prime. Scroll down to the bottom of this article for the comparison why you shouldn't use Chamberlain, mostly because of the multiple hoops and delays the signal has to jump through.

u/icepickwillie · 1 pointr/HomeImprovement

If you already dabble in home automation or want to get started, you could hard-wire this type of fixture each of them, then install this recessed z-wave sensor. In this case you'd also need to get smart bulbs (I like Osram LIGHTIFY bulbs. You can get on/off only ones for $20). Then you'd configure your hub to turn on the lights every time the contact opens, and turn them off when it closes.

u/int0this · 1 pointr/HomeKit

I wanted them to update this one to home kit, benefits are it directly connects to your router and requires no additional tilt sensor.

I have been using it and works great with home-bridge and Home Assistant.

u/user_36753 · 2 pointsr/amazonecho

Amazon has not allowed Alexa to open/close doors or to unlock doors due to safety and security concerns. There are some workarounds out there.

I use the linear zwave garage door opener:
https://amazon.com/GoControl-Linear-GD00Z-4-Z-Wave-Controller/dp/B00M75TEIU

There is a custom device handler made for it on SmartThings that allows you to open and close it with alexa. However, I have tell alexa to turn it on (open) or off (close). It does not support Alexa telling me the status of the door. I still have to use the Smartthings app for that.

u/FearTheGrackle · 2 pointsr/CarPlay

Yes. You need three things:

An Apple TV 4k, iPad, or HomePod

One of these:
MyQ Smart Garage Door Opener Chamberlain MYQ-G0301 - Wireless & Wi-Fi enabled Garage Hub with Smartphone Control https://www.amazon.com/dp/B075H7Z5L8/ref=cm_sw_r_cp_api_i_FMbsDbWY8DV71

And either need to run homebridge 24x7 somewhere in your house on a computer, or get this:

LiftMaster MYQ 819LMB MyQ Home Bridge https://www.amazon.com/dp/B075RQVSY7/ref=cm_sw_r_cp_api_i_HObsDb3PB0G0S

u/Steve2828 · 1 pointr/googlehome

SmartThings then something like this:
https://www.amazon.com/GoControl-Linear-GD00Z-4-Z-Wave-Controller/dp/B00M75TEIU

Depending on how handy you are with things, you can also semi-roll-your-own with one of these:

https://www.amazon.com/MIMOLite-Z-wave-Multi-Input-Output-Contact/dp/B00B6RZ7MM

Over on the smarttthings community there are several threads where people set this up (search MimoLite)

You can also use any zwave relay. Lots of good info on this over at SmartThings Community.

Once you have it working in the SmartThings, if it doesn't already appear as a switch to Google Home, you can make a virtual switch and then have a smartapp activate the door when the switch is pressed.

Personally, I made my own using an Arduino, a relay board, and a SmartThings "ThingShield" for arduinos. This was years ago before many ready-made z-wave options existed.

u/remembertosmilebot · 1 pointr/smarthome

Did you know Amazon will donate a portion of every purchase if you shop by going to smile.amazon.com instead? Over $50,000,000 has been raised for charity - all you need to do is change the URL!

Here are your smile-ified links:

https://smile.amazon.com/gp/aw/d/B00B8BFG0O/ref=pd_aw_sim_60_3

---

^^i'm ^^a ^^friendly bot

u/bitchkat · 1 pointr/teslamotors

I did some home automation last year using a Wink Hub2 and bought $45 Z-Wave controllers for my garage doors that include tilt sensors so can tell if the garage door is open and get alerts. Plus it lets you control the garage door (and anything else connected to your Wink Hub) from your phone any place you have an internet connection.

Homelink on the car does better geofencing and the Wink will not auto open the garage doors for "security" reasons so they work really well together.

u/ModernRonin · 5 pointsr/electronics

For the trip-beams, the easiest thing is to use garage door IR beam sensors. E.g. - http://www.amazon.com/gp/product/B0006N1RH6/ref=pd_lpo_k2_dp_sr_3?pf_rd_p=486539851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00283U19M&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0W0VM31WZ4FE2T2X3607

I'm assuming these run on 12V or something close, but without one in hand I can't be sure. To supply 12V without running a power wire, a fully charged car or motorcycle battery will work.

But honestly, you'd probably be better off running the wire. It's a real pain in the ass to lug around lead-acid batteries to and from a charger. And with four sensors, you might have to do that frequently.

For the wireless part of the system, you can buy four of these for the transmitters:

http://www.sparkfun.com/products/10534

And one of these for the receiver:

http://www.sparkfun.com/products/10532

I'm trying to think of a quick and easy way to interface to the receiver, but sadly nothing comes to mind. The easiest way would seem to be an Arduino, and that isn't as easy as I feel like this should be.

Still, pretty hard to beat the price. Four sensors @$20 => $80 + 4 transmitters @$4 => $20 + 1 receiver @$5 totals out to $105.

The major cost is in the beam sensors. You can make those yourself too if you like, but you'll need some non-trivial electronics skill to do so. It's mostly some IR LEDs to create the beam, a photocell/phototransistor to receive the beam, and a schmitt trigger to monitor the output of the photosensor but avoid noise and false alarms. Because you're only going to be making 4 or 5, the cost per unit may be higher than one would expect. Still, I expect you could make them for less than $20 each. (Not sure how much less...)

...

If putting the whole system together yourself is annoying, or you're short on time, you can of course spend more money and buy a pre-made system. But the cost is high, especially for 4+ sensors.

For example, take http://www.entryalertproducts.com/site/1313934/product/00-200

By my reckoning, a 4 beam system will cost $190 (base unit + 1 tripbeam sensor/transmitter) + 3 * ($70 tripbeam + $50 transmitter) = $550.

u/jrmckins · 1 pointr/ifttt

This doesn't help with your question but, if this thing goes on sale this week (Amazon Prime Days), then replace the MYQ https://www.amazon.com/gp/product/B07L5DPK8P

The idea that Chamberlain will charge to use something free like IFTTT is just ridiculous.

u/roothorick · 3 pointsr/homeautomation

The best option, in my opinion, is one of these and an appropriate Z-Wave controller. Everything else will handcuff you to one specific cloud platform and limit your integration options.

u/critus5486 · 1 pointr/homeautomation

I went the upgrade route on my Chamberlain, I bought this to replace the wall unit opener in the garage: https://www.amazon.com/Liftmaster-Security-Control-Upgrades-Previous/dp/B00B8BFG0O
And this is the wired gateway required to interface with the network:https://www.amazon.com/LiftMaster-828LM-Internet-Gateway/dp/B005FT4N2M
Works perfectly with both Wink & Smartthings

u/DarienLambert · 1 pointr/homeautomation

I use the Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller with my SmartThings hub. Works perfectly.

u/cdhgee · 4 pointsr/homeautomation

I bought the Linear GoControl Z-wave controller. It's compatible with most garage door openers, you just hook up a couple of wires into the garage door opener.

I have it connected to SmartThings, it works like a charm.

u/bmg1987 · 1 pointr/homeautomation

Looks like it dropped to $80

MyQ Smart Garage Door Opener Chamberlain MYQ-G0301 - Wireless & Wi-Fi enabled Garage Hub with Smartphone Control
https://www.amazon.com/dp/B075H7Z5L8/ref=cm_sw_r_cp_apa_kia2BbS5X0XZ8

u/dongger · 2 pointsr/homeautomation

As long it was made after 1998 all you need is to upgrade the wall panel with this and it will be compatible. https://www.amazon.com/dp/B00B8BFG0O/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=1SQ7AHQ56EE7X&coliid=I3IRD1MAAJ2IBA&psc=1

"The 888LM is compatible any LiftMaster, Chamberlain, Sears Craftsman garage door opener manufactured since 1998 with RED ORANGE or PURPLE learn button.
The 888LM is Not Compatible with Newer Security+ 2.0 garage door openers with a round YELLOW learn button and YELLOW Antenna.
Your existing remote controls and wireless keypad if your happy with them will also continue to work using the reciever in your garage door operator. There is no need to replace them.
When paired with the 828LM Internet Gateway, sold separately. You can control your garage operator with your smart phone, tablet or computer "

u/buro2018 · 2 pointsr/smarthome

Have you tried this one? You should be able to jump right from the switch even though they recommend from the opener itself.
meross Smart Wi-Fi Garage Door Opener Remote, APP Control, Compatible with Alexa, ... https://www.amazon.com/dp/B07L5DPK8P/ref=cm_sw_r_sms_c_api_i_NooVDbXWPEKA7

u/Dezvinci · 1 pointr/deals

I use this https://www.amazon.com/gp/product/B0752P57ZG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 and it has worked amazing with my garage door and google/alexa and its only 13 dollars

u/tomgabriele · 3 pointsr/homeautomation

HERE'S WHAT YOU DO

I am assuming your fireplace is propane or natural gas and not wood. A real wood fire would be hard to automate. I am also assuming that your fireplace has an IR remote control...otherwise we are in the realm of servos and stuff to automate a physical control.

Embed a small magnet in the tip of the wand, and embed the controller half of a door sensor somewhere near the fireplace; a recessed one like this may offer the cleanest install. When the magnet in the wand gets close to the door sensor, it will report that it's closed and you can use that as a trigger for the action. From there, a Harmony Hub is probably the best way to turn the door close into an IR signal.

You could also set "incendio" as a custom voice command for a nearby Google Home, so it's the spoken charm that makes the action and all the wand-waving is just for show, but having to say the "hey google" wake word kind of breaks the illusion.

u/beeedeee · 0 pointsr/homeautomation

I used one of these before I got a MyQ garage door opener. Works great with Wink and Alexa.

https://www.amazon.com/dp/B00M75TEIU/ref=cm_sw_r_cp_apip_qa7Jwhq518Pgd

u/JackAceHole · 3 pointsr/SmartThings

I have the GoControl Z-Wave Controller and it works great with Smartthings.

u/hurlshow · 1 pointr/googlehome

I bought a NEXX Garage door opener and it works both with google home and nest via IFTTT. NO monthly fees and it was worked flawlessly since I installed it. Took me about 30 mins to install. It even has a safety pin that google home needs to open so if I leave a window open someone can’t tell “hey google open the garage”.

NEXX Garage NXG-100 Nxg Remote Compatible Door Openers-Control Using Smart Phone, Amazon Alexa and Google Assistant Enabled Devices, White https://www.amazon.com/dp/B01J8JI9HY/ref=cm_sw_r_cp_api_5AaPAb9TKX3W7

u/Kanaloa · 1 pointr/homeautomation

Link didn't work for me, but yes, the MyQ uses a hub. I think I have this one. It needs power and an ethernet connection, and needs to be close enough to the garage doors. The door opener might come with it?

*I found the item you linked, it specifically states hub not included.

u/Economy_Leg · 12 pointsr/homeowners

I would recommend a mid-range Chamberlain. E.g. something like this B970 for $250 which has a lot of nice features (quiet belt drive, battery backup for use during power outages, and wifi control if you want it). Installation is pretty straightforward (couple hours DIY, depending on how handy you are and whether you have a 2nd person to help).

You can get basic garage door openers for more like $150 but I think the extra $100 gets you some nice features.

No reason to spend any more IMO, and no reason to pay for someone to install it if you are just slightly handy.

u/MistakenAnemone · 4 pointsr/smarthome

GoControl/Linear edge
https://www.amazon.com/gp/aw/d/B00M75TEIU/ref=mp_s_a_1_1?ie=UTF8&qid=1502321646&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=go+control+zwave&dpPl=1&dpID=41mR-vfm7WL&ref=plSrch

This works with some, but all, garage door openers. And when it works it's extremely way to use and install. I use mine with Smart things hub.

u/simplyclueless · 2 pointsr/GoogleWiFi

Yes. This one works fine.

u/msutalon · 3 pointsr/LifeProTips

Fair enough. They actually make door-sized screens as well that fasten with magnets down the middle.
Edit; https://www.amazon.com/gp/aw/d/B00KZNOHTW?pc_redir=T1

u/ShacklefordLondon · 4 pointsr/nashville

Sorry this happened to you. We installed Door Devil's for some peace of mind. Makes kicking in the door about 1000x harder

https://www.amazon.com/Door-Devil-Home-Doorframe-Reinforcement/dp/B00ZGUMLZQ

u/eightdrunkengods · 2 pointsr/motorcycles

Is is this thing? http://www.northshorecommercialdoor.com/st30gadoopvi.html

It doesn't look very big. I'd probably just take the clip off and put it in my pocket (that's why I do with my garage remote, actually). If you want to go smaller, you could consider something like this.

Any programmable 300 MHz remote should work with the gate receiver. I'd find one with the same dip switch config as the remote you have. The switches are basically the "combination" that allows the remote to open the gate. Open old and new remotes, set the switches on the new remote to mimic the old one. Then the new remote should open the door.

u/bk553 · 1 pointr/HomeImprovement

We just got an Chamberlain WD1000WF to replace our old sears opener from the 90's and it is really nice, it's so quiet the dogs don't even know we're home anymore.

https://smile.amazon.com/Chamberlain-WD1000WF-Smartphone-Controlled-Ultra-Quiet/dp/B013UGZYOM/ref=sr_1_5?s=hi&ie=UTF8&qid=1466562318&sr=1-5&keywords=garage+door+opener

u/BoondockSaint296 · 1 pointr/SmartThings

I have had this one for a fee months now and it works with SmatThings, but not Alexa for now. It works really well and can hookup to just about any garage door opener.

GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller, Small, Black https://www.amazon.com/dp/B00M75TEIU/ref=cm_sw_r_cp_apa_b0G7ybRFZ6B0X

u/dougmpls3 · 2 pointsr/Dogtraining

Feed the dog outside, exclusively. It will help a lot. And check this out so the dog can freely go in and out, but not the mosquitoes. http://www.amazon.com/dp/B00KZNOHTW

u/Bored_Stiff69 · 7 pointsr/homeautomation

MyQ Smart Garage Door Opener Chamberlain MYQ-G0301 - Wireless & Wi-Fi enabled Garage Hub with Smartphone Control https://www.amazon.com/dp/B075H7Z5L8/ref=cm_sw_r_cp_apa_i_aSe2DbJSKHWY7

u/_sn2_ · 1 pointr/TeslaModel3

M using this. It’s very simple to setup.

MyQ Smart Garage Door Opener Chamberlain MYQ-G0301 - Wireless & Wi-Fi enabled Garage Hub with Smartphone Control https://www.amazon.com/dp/B075H7Z5L8/ref=cm_sw_r_cp_api_i_PbDSDb4K2K0JZ

u/dekas_guitarhero · 1 pointr/Abode

You can buy the GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener

Those are compatible with Abode system. I bought one, integrated it with my Abode and now it can control my Liftmaster. It's been working great, I set up automatically closing after a few minutes and when alarm mode is changed to Home or Away.

There are some reviews saying that this controller only works for about a year and then quits, so I'd recommend buying the extra warranty (it was $10 bucks for 3 years on Amazon).

u/VCinOhio · 1 pointr/dogs

Instead of using the sliding screen, maybe you could use one of these:
https://smile.amazon.com/gp/product/B00KZNOHTW/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
The dog can push it aside as he goes in/out of the doggy door.

We don't have a doggy door, but we have had one of these magnetic screens for the last 4 years (they last 2 summer seasons for us). It works well to keep the bugs out once you get it hung correctly. The dogs learned to use it in a few minutes.

u/rittyroo · 1 pointr/homeautomation

i read where someone used a recessed door sensor and put it inside where the deadbolt locks. when it's locked, the sensor is 'closed' and when unlocked it's 'open'.

like this thing: https://www.amazon.com/Recessed-Door-Sensor-ZW089-Aeotec/dp/B0151Z49BO

u/PredaPops · 1 pointr/gifs

Serious reply.
I purchased a garage door kit that connects to my android and my wifes iphone.

http://www.amazon.com/gp/product/B00C1CF1S6/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1

It works out pretty well but does seem a bit stalkerish because i can see when she gets home.

u/400HPMustang · 1 pointr/HomeKit

Do you know how to tell which devices are compatible with this firmware? I have one of these, I'd like to get native compatibility with:

https://www.amazon.com/gp/product/B0752P57ZG

​

u/annimossity · 5 pointsr/HomeImprovement

Nope, just masked and used a spray shield. Covering the top glass was the most time consuming.

I saw other people do the hardware on the garage doors and it adds some depth to it. I went with these on amazon and they're magnetic.

https://www.amazon.com/gp/product/B00QF6DFJQ/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

u/ATLGolfAddict · 1 pointr/SmartThings

I bought these door sensors for my doors coming in from the garage. So now my lights in the stairs turn on whenever the door is opened and stays on for 3 minutes.

Aeotec Recessed Door Sensor Gen5, Invisible Z-Wave Plus security and open / close sensor, Battery powered https://www.amazon.com/dp/B0151Z49BO/ref=cm_sw_r_cp_api_LmIFAbH89XVBC

u/PinBot1138 · 3 pointsr/SmartThings

I use the model that you’re talking about (GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller, Small, Black https://www.amazon.com/dp/B00M75TEIU/) and it works great, and a shout-out to their support team for owning up to a known defect in the first version that I got where it would beep and do everything as expected, but not actually open the garage. So, technically, I’d say 5 stars, though I’d have to knock it down to 4 stars only for the trouble of replacing the lemon unit with a working one.

Every now and then, the replacement unit does exhibit this problem of beeping and not doing anything when I ask it to, but that’s so few and far between, and works if I go after it for a second time, that I’d still recommend this to you.

u/ghrayfahx · 2 pointsr/homeautomation

GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller, Small, Black https://www.amazon.com/dp/B00M75TEIU/ref=cm_sw_r_cp_api_i_qQH4BbHC7CQTS

I install one of these every week or so. They work really well for modern openers.

u/ecirfolip · 4 pointsr/homeautomation

This device is currently natively supported in SmartThings and will both control your garage door and let you know if it's open/closed: http://www.amazon.com/GoControl-Linear-GD00Z-4-Z-Wave-Controller/dp/B00M75TEIU

u/spinjc · 1 pointr/HomeKit

Looks like per Chamberlain - myQ Home Bridge it'll work:

>Adds both smartphone control and HomeKit™ compatibility to:
>
>* LiftMaster and Chamberlain myQ-enabled garage door openers (has a myQ logo/no Wi-Fi logo)
>
>* LiftMaster MyQ Control Panel (model 888LM)

Note that you might be able to get even cheaper by getting an old liftmaster/chamberlain opener and a 888LM wall control and the home bridge.

I wouldn't be surprised if the 888LM works with other brands. (I'd check with a local garage door installer if they've tested this setup.)

u/WorkingMan69 · 2 pointsr/homeautomation

Not any opener... If you have one with digital signals over the wire to the opener instead of analog signals, it will not work. This is surprisingly a lot of newer openers. It would be any that have other buttons than the open/close button on the wall opener. (Like this one )

u/pointer_to_null · 5 pointsr/teslamotors

Luckily, garage door openers have already thought of this.

There are cheaper models with battery backup available, but this is the one I got.

u/Animum_Rege · 1 pointr/Abode

If you're a homeowner, I would recommend going with a recessed sensor. https://www.amazon.com/Aeotec-Aeon-Labs-ZW089-Recessed/dp/B0151Z49BO

Otherwise, I would probably install the magnet (small piece) on the interior lip of the molding assuming the door has enough clearance to pass, then stick the sensor (big piece) to the door. I'm not really sure how the vibration from the door would affect life and longevity of the the sensor, though.

u/pharmdoll · 2 pointsr/HomeImprovement

I was surprised at how much these magnetic garage door accents changed the look of my attached garage. There are many different styles to choose from, take seconds to “install” and made my garage look so much better. I bought mine at Lowe’s for 2x this price, so I’d definitely look online.

u/doktoroktobor · 2 pointsr/amazonecho

It’s this device, https://www.amazon.com/dp/B0752P57ZG/ref=cm_sw_r_cp_api_i_Hyk1BbSPGZBWT and it uses the eWeLink app to configure.

I want to be able to, for example, grant access to my in-laws so they can let themselves in, but without having them signed in to my Alexa account.

This is more of an Alexa or IFTTT question, as this same question could apply to my Lutron controllers, ecobee, etc...

u/darktor · 1 pointr/homeautomation

If your asking how to add MyQ to your current garage door opener, you'll need this.

https://www.liftmaster.com/for-homes/Accessories/MyQ-Accessories/model-MYQPCK

I bought mine at Amazon.

http://www.amazon.com/gp/product/B00IPKPVCE

u/veggiepirate · 1 pointr/gadgets

I was really surprised there were as cheap as they are, but internet-enabling my garage door opener only required a ~85 dollar kit. Seems to work with tons of models, since Chamberlain seems to be the parent brand to a bunch of them.

u/HtownTexans · 2 pointsr/homeautomation

I have the GoControl for my 2 garage doors. It works great and most importantly integrates with hubs and IFTTT (i prefer Stringify though). The MyQ does not release there API to work with other services from what I here. I use a Wink and story around the block is you can't even make Robots using the MyQ. However, 20 dollars is a steal esp. compared to 80.

u/Fat-Penguin-COCK · 7 pointsr/winkhub

I just installed mine last night, you need the my q internet gateway, not all openers come with it, but the serial number is on the bottom of the gateway. https://www.amazon.com/gp/aw/d/B00B7CDSQ8/ref=mp_s_a_1_2?ie=UTF8&qid=1479230823&sr=8-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=myq

u/AndroidDev01 · 1 pointr/homeautomation

I can't believe no one has said this yet. It does need a HUB though...

u/LzyPenguin · 1 pointr/homeautomation

https://www.amazon.com/dp/B071KFX63R/ref=cm_sw_r_sms_c_api_i_BvSYCb4VT0AE0

Then I purchased this case for it:

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F122513958760

I purchased 4 of these cases because they are either $30ea from amazon or $6.50 each on eBay but you have to wait for them to be shipped from China. So if you were going to buy a case let me know and we can work something out.

u/butch81385 · 3 pointsr/funny

And you don't even have to replace your opener. You can buy something like the Meross garage door kit (https://www.amazon.com/meross-Smart-Control-Compatible-Assistant/dp/B07L5DPK8P). It needs power, wifi signal, and needs to connect to contacts on your existing opener. If you have a wired "doorbell style" button, you can just splice it into those wires. It also comes with a door sensor so you can see if the door is currently open or closed and get warnings if the door is open longer than a set time limit.

u/goltoof · 1 pointr/homeautomation

I'm using ecolink sensors, thinking of buying these. I just don't ever want to have to fuss with changing out batteries ever again, whether 1 month of 5 months or a year later. Just want to wire them and be done with it.

u/Jazz87 · 0 pointsr/winkhub

Here's one http://m.smarthomedb.com/product/ecolink-garage-door-tilt-sensor/p372

Also this zwave garage door opener works with wink GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller, Small, Black https://www.amazon.com/dp/B00M75TEIU/ref=cm_sw_r_cp_api_CeaEybE8ENTP1

u/diomark · 3 pointsr/SmartThings

I've been using this one for over a year without any issues - GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller, Small, Black https://www.amazon.com/dp/B00M75TEIU/ref=cm_sw_r_cp_apa_3JsHAbS1DN09R

u/Shiny_Callahan · 6 pointsr/wyzecam

I "rolled my own" garage door button with a wireless relay.

u/kakunaratata · 1 pointr/motorcycles

I assume you're talking about this


I had this device and it did everything I needed. That $99 model wasn't out yet when I purchased mine.

edit. I believe my $50 device only worked with Chamberlain garage door openers that had built in MyQ technology that made it compatible. I think the $99 device makes virtually any garage door opener compatible.

u/nancyjunebug · 1 pointr/HomeImprovement

https://www.amazon.com/meross-Smart-Control-Compatible-Assistant/dp/B07L5DPK8P
This was recomended above and I am thinking of getting it.

u/thingpaint · 1 pointr/homeautomation

>I don’t know what to do about the garage door as I can’t use MyQ.

I bought this it's an actual legit z-wave device. I'm trying to get away from things that use the cloud, just from a reliability standpoint.

u/dr0ffig · 2 pointsr/ifttt

i have that built into the pad that mounts on the wall - it defaults to about a minute and beeps beforehand. I am out of the country or else I would send a picture of the keypad. very similar to the one in the middle of this main picture - https://www.homedepot.com/p/Chamberlain-1-1-4-HP-Equivalent-Ultra-Quiet-Belt-Drive-Smart-Garage-Door-Opener-with-Battery-Backup-B970/301951467?MERCH=REC-_-NavPLPHorizontal1_rr-_-NA-_-301951467-_-N

​

​

edit - found it - this is what i have - https://www.amazon.ca/LiftMaster-888LM-828LM-Retrofit-Package/dp/B00IPKPVCE/ref=sr_1_11?keywords=myq&qid=1559023256&s=gateway&sr=8-11

u/ThatDudeAaron · 1 pointr/homeautomation

Liftmaster internet gateway (for newer liftmaster openers)

MyQ MYQ-G0301 for just about anything else

​

u/plasm0dium · 1 pointr/homeautomation

Is this the same as the Liftmaster 828LM? I have a Liftmaster 8500 opener and their Internet gateway looks exactly the same. Can someone confirm?

828LM LiftMaster Internet Gateway https://www.amazon.com/dp/B005FT4N2M/ref=cm_sw_r_cp_api_igkbzb4RDP38B

u/bubblegoose · 1 pointr/homeautomation

I have one of these that can handle "inching" and check it with my Wyze camera. Semi redneck engineered, but I can check if we forgot the door or the kids left it open. https://www.amazon.com/dp/B0752P57ZG/ref=cm_sw_r_em_apa_i_U3oQDb8CAV7YV

u/FinalF137 · 1 pointr/Nest

I bought the MyQ on prime day this year, https://www.amazon.com/dp/B075H7Z5L8, It works as expected but it doesn't integrate with nest, It does with Google but you can only open it through the app not voice command, you can close it with a voice command though.

u/R0bX · 1 pointr/homeautomation

Is this different than the one at Amazon that is only $45?

u/scottocs · 2 pointsr/homeautomation

So you're saying if I buy the MyQ Garage Door Opener for my new house, I can return this?

u/nrcaldwell · 1 pointr/Abode

If you don't want visible contact sensors on your door you can also use the Aeon Labs Recessed Door Sensor (ZW089-ZWUS). This requires you to drill a hole in the edge of the door and the door frame.

https://www.amazon.com/Aeotec-Aeon-Labs-ZW089-Recessed/dp/B0151Z49BO

u/AlexTakeTwo · 1 pointr/homeautomation

>But if I did leave it open, it's not the kind of mistake one makes more than once

Sadly, not true. After never leaving a garage door open in my life, I moved into a new house and left the garage open three times in two weeks. Sigh.

I have a Z-Wave automation system, so I put an open/close tilt sensor on the door, and next step is a remote open/close control for the door.

MyQ is my preference for an opener since I have to replace my garage door opener anyway, but if your existing controller is not compatible with MyQ there is a third party device called NEXX Garage Door Opener which is a little more expensive but supposed to be compatible with most openers.

u/joehx · 1 pointr/Flipping

Bought a new smart garage door opener for about ten bucks, sold it for $60 on ebay. About $30 profit.

I originally was going to use it for myself, but I needs some sort of central hub that I don't have and didn't want to pay for. I would've listed it for $80 but it was missing the tilt sensor (I bought it at an overstock auction - I guess it must've been a return).

u/sheeksta · 2 pointsr/googlehome

I bought meross. Couldn't be happier. Frequently available as low as $38 on Amazon

https://www.amazon.com/dp/B07L5DPK8P/ref=cm_sw_r_cp_apa_i_jsMmDbSQRT34A

u/thejunioristadmin · 7 pointsr/homeautomation

I bought this go control unit from amazon back in October and set it up without much trouble. Initially I just had a hub and this for my garage to be able to check the door status after we left the house and my wife would question whether the door had closed.

I was in my basement at about 10pm the first time I heard the garage open. I thought it was odd since I knew my wife was upstairs on her computer so I checked it out and asked if she had triggered the door to open from her phone though I wasn't sure if she knew she could do this. I checked a few things on the smart things app, shut the door from the OG button outside and went to bed.

About a month later I woke up and headed out to work to find the garage door open. When I got to my car I immediately knew it had been gone through. Nothing valuable to a thief was stolen but they did take the hand mics to both my ham radio and my cb (I offroad and use these to communicate with my group), a knife that was in the driver front door pocket, and a car phone charger.

I checked my wifes car and saw that the center console had been tossed. Her car is kind of a mess so although I knew someone had gone through it I couldn't tell if anything was gone. I knew I couldn't do anything about it at that point so I left for work and an hour later when I knew she'd be awake I texted her about what had happened. She walked down to check the garage and it was open again after I know it closed when I left. She closed it and did her thing before also leaving for work.

I was in the middle of something at the office so I couldn't immediately leave but a few minutes later I went home (20 minutes away) and disconnected the GoControl. I haven't done anything with it since then. I did realize later though that the thief took my dewalt 20v battery and unplugged my charger to also take but actually left because the power cable was twisted around a few different things. I feel fortunate that they didn't steal more because I had my drills and other tools right in front of my car on a work bench.

u/seoulfully · 1 pointr/smarthome

A lot of the regular sensors have options for this. I actually haven't done this myself (my door is a bit of a problem for this sort of solution). Here are some I found (not affiliate links):

​

https://www.amazon.com/Aeotec-Recessed-Invisible-security-Battery/dp/B0151Z49BO

https://www.amazon.com/GE-Wireless-Attaches-Existing-32563/dp/B01KQDIUAW

https://www.monoprice.com/product?p_id=15268

u/czrabode · 2 pointsr/Abode

I got the Linear Garage Door Opener.

Works well. Plugs in easily to existing garage door opener.

Be very careful with it though. I never include closing it in automations in fear of it closing down on a kid or pet.

It is also an IoT device that if hacked, it will allow bad guys to get in your garage.

u/Petermoffat · 2 pointsr/HomeImprovement

If this is your model, look at the bottom of page 17. You can buy a rolling code receiver (like this)and connect in place of the wall mounted button. Get something that can have additional remotes added, and mount on to the wall if you need that convenience.

You could wire a smart opener in here too, or DIY something with a Arduino or similar and NO relay that closes for a few hundred milliseconds when triggered, which will operate the motor too.