Reddit mentions: The best hunting knives

1. Tent: Eagles Peak II Two person tent - http://www.dickssportinggoods.com/product/index.jsp?productId=50802926
   -This was generous gift from my SO's mom. It may not be the best tent out there, but at free it can't be beat.
   
   
2. Sleeping Bag: Marmot Aspen Minimalist 40 - http://www.trailspace.com/gear/marmot/aspen-40-ultralight/
   -Got this for its small size and light weight. Future winter camping trips are a possibility, in which case I plan on snagging a wool blanket of sleeping bag liner.
   
   
3. Sleeping Pad: RidgeRest Classic - http://www.amazon.com/Therm-A-Rest-6433-Parent-RidgeRest-Classic-Mattress/dp/B00HZ13OYG
   -Simple basic sleeping pad, I've been using these since scouts and have wanted for nothing more, especially because of its light weight.
   -In the event of winter camping, is this enough to insulate from the ground? If not, what could be added to my sleep system to keep me insulated from the ground?
   
   
4. Cookware: Pot Pan stackable combo - http://www.amazon.com/gp/product/B00FQZEYWE?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00
   -Lightweight and simple, these were cheap and seemed straight forward.
   -They stack with the majority of either piece's empty space facing each other, allowing for decently dry storage for matches etc. inside.
   -Comes with a tight fitting mesh ditty bag
   
   
5. Small Camp Grill - Coghlan's Camp Grill - http://www.amazon.com/gp/product/B001OPHA0S?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
   -Another straight forward and cheap piece,
   -This is really an optional piece, I plan on bringing it along on trips with big groups or when cooking meat is in the cards.
   
   
6. Plates x2: Coleman Enamel plates - http://www.amazon.com/gp/product/B0009PUSPI?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
   -These are the camping gold standard in my book, been using them since scouts.
   
   
7. Stuff Sacks x3: REI pack of 3 Ditty Sacks 2, 3, and 7 liter. -http://www.rei.com/product/795047/rei-ditty-sack-package-of-3
   -Came in a decently affordable combo pack, plan on using them for food/toiletries storage and bear bags.
   
   
8. Knife: Morakniv Companion Straight Knife - http://www.amazon.com/gp/product/B004TNWD40?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
   -Love this little knife, cheap but durable and was a shaver straight out of the box.
   -Came with a super thick plastic sheath
   
   9)Hatchet: Estwing Hatchet - http://www.amazon.com/gp/product/B004TNWD40?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
   -Heard this was a classic, people say they've still got the one's their grandfather's used. It's heavy, but I'm happy with the tradeoff.
   -Got it sharpened well enough to cleanly slice through paper at the moment
   
   
9. Axe Sharpener: Lansky Dual Grit Sharpener - http://www.amazon.com/gp/product/B000B8FW0Y?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
   -Great sharpener, pretty much the go to field sharpener from what I've gathered.
   -Only took a couple minutes to learn how to use, the only hard part is consistently following the bevel through each stroke, but it gets easier.
   
   
10. Camp Towels x2: Microfiber quick-drying towels - http://www.amazon.com/gp/product/B000B8FW0Y?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
    -Very great, medium size towels with their own tote
    
    
11. Collapsible Water Jug: REI 2.5 gallon collapsible water jug - http://www.rei.com/product/402099/reliance-fold-a-carrier-water-carrier-25-gal
    -Seems great, picked it up at REI physical store then read reviews and got spooked, we'll see though, a minority of the reviewers swear by it.
    -Just in case it sucks, any suggestions for a collapsible water container of equal size/price?
    
    
12. Water Bags x2: 33 oz Bag style canteens - http://www.amazon.com/gp/product/B010OLZ3E2?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00
    -These came free with my water filter, and they have many good reviews. If they do well, I may buy some extras.
    
    
13. Wine Skin: 2L - http://www.amazon.com/gp/product/B00CN4RN42?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
    -More showing of my primitivist ass, and I thought I could take some weight off of my SO by carrying enough water for the two of us.
    
    
14. Pillows x2: Field and Stream - http://www.dickssportinggoods.com/product/index.jsp?productId=33581126
    -Got these a long time ago when I knew less, they are pretty bulky and my first item I want to replace
    
    
15. Pack: Kelty Redwing 50L Black
    -SO's mom gifted this this Christmas, so amazing and thoughtful, one of the best gifts I've ever gotten and I love the color
    
    
16. Shoes: Skechers Trail Runners - I found these at the thrift store for a stunning 12 bucks and they fit perfectly
    
    
17. Lighting: Outlite Lantern -http://www.amazon.com/gp/product/B01178FLM0?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
    -Pack of flashlights (might not bring all four) - http://www.amazon.com/gp/product/B00V639BNC?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s01
    
    
18. Extras: Tarp as groundcloth, some extra stakes.
    
    Items not shown:
    -Always a tin or bag of Drum Tobacco and papers
    -Kindle, old generation one
    -Collapsible trowel
    -Paracord
    -Burlap shoulder bag for gathering kindling etc
    
    Items still wanted (suggestions greatly appreciated):
    -Knife for SO
    -Work gloves
    -Plastic flasks for booze
    -Belt pouch
    -Higher quality tarp
    -Knife Sharpener
    -Sleeping bag liner or wool blanket
    -Any food suggestions!
    -Rain cover for pack
    -Smell proof food bags
    
    I don't have much experience outside of scouts, so I'm very open to critique of my setup. I will warn that I am very much into primitivism, and camping for me is a gateway to a backcountry, esthetic lifestyle I one day I hope to live, so some of my gear choices may not always be the most efficient. Any advice from a primitivist or purist standpoint is doubly appreciated.
    
    

It's definitely enough for a nice knife, though you might want to go a bit higher for a great knife. The KaBar BK2 is actually designed with things like batoning (hammering the knife through wood as a kind of faux hatchet using another piece of wood against the blade of the knife as the hammer itself) or chopping. It's a bit over $60, currently available for $69 to be precise, but as long as you don't flat out abuse it (prying heavy things, for example) it'll serve you well and quite possibly for the rest of your natural life.

At a lower price, you can get the Condor Bushlore, which at $35 is a perfectly valid choice that will serve you well indeed.

For an even lower price yet, the Mora Heavy Companion is from one of those few cheaper knife companies that does incredible work. I wouldn't baton with it, honestly, but even if you did it'd probably hold up just fine.

At a more expensive range, the Ontario Rat-5 is an amazing bushcraft knife. The Fallkniven Pilot Survival Knife is also an amazing knife. The Benchmade Bone Collector is spectacular knife made in D2 tool steel, one of the better steels available at that price. Another amazing knife is the Spyderco Bushcraft made in O1 tool steel. Finally, the Benchmade 162 is a pretty amazing knife.

One thing you'll notice about all of these knives with the exception of the Pilot Survival knife and the BM 162 is that they're all carbon steel knives. Carbon steel is a lot tougher than stainless (with a few very, very rare exceptions I'd never trust a long knife to be stainless steel) with the trade off of being a lot more of a hassle to take care of, since it needs to be regularly cleaned and oiled.

If you want a fire starter, carry a magnesium fire starter. With the carbon steel knives, you can probably strike it against the back of the blade to create the sparks you'll want and if not (like with some of the coated ones) you'll be carrying the striker anyway.

For sharpening, you'll want to get a decent sharpening setup and start stropping. A couple of easy sharpening systems would be the superior Spyderco Sharpermaker (usually available on Amazon around the $50 mark) or the Lansky Sharpening system which while cheaper isn't as good. You could take the time to learn how to free hand it, but most casual users don't care that much because it takes a long time to get proficient at freehand sharpening. Stropping is running the blade against something like smooth leather (usually smooth leather, actually) to remove burrs along the blade of a knife made by use and sharpening and the restore a blade to a better edge without removing metal. Stropping allows for a level of sharpness unachievable by sharpening alone and extends a knife's lifetime by allowing sharpness to be achieved for longer without removing metal from the blade. To learn how to strop, watch videos on YouTube or check out guides from the sidebar of /r/knives.

Finally, if you want a whistle, just carry a whistle. If you want a mirror for signaling, carry a small signaling mirror or mirror polish the knife you buy (a process where you sand the blade with increasing grit level sandpaper until it shines like the sun and you can see yourself in the blade).

If you have any more questions, feel free to ask.

So in my mind, the basics of an EDC are a knife, a flashlight, a pen, and a notebook. Depending on your preference/level of preparedness, though, multitools are great, a gun is convenient if you're in a dangerous place with any regularity, and a first-aid kit can literally be a lifesaver.

So for the basics I'd recommend:
Knife: a Kershaw Leek or Scrambler. The Leek is smaller, more discreet, very light, and razor sharp. The Scrambler is considerably more robust, has a longer blade (3.5" vs. 3"), but weighs more as well. Both can be found in Kershaw's "Blackwash" finish, which I like both for the feel and for the added rust and scratch resistance. Both are also spring-assisted, which is legal in a lot of places, but check your local laws before carrying either in public. If you can't carry them, take a look at the Cold Steel Voyager. It comes in several lengths, is legal in California, and is very durable, if not super comfortable.

Flashlights: Oh my god, the flashlights. LEDs have become so cheap and so bright over the last few years that it's actually pretty hard to go wrong. Nitecore is currently my favorite brand, but Fenix has some options as well. I would urge you not to buy a surefire; they are undeniably great lights, but unless you expect to encounter truly extraordinary circumstances on a regular basis (any chance your light could fall under a tank or a bulldozer? maybe surefire is for you), they tend to be somewhat more pricey per lumen than a number of other companies. For EDC, the Fenix PD35 2014 edition is almost unmatched. Almost a thousand lumens, takes rechargeable batteries, and small enough to drop into the front pocket of your jeans, if you don't want to use the included clip or holster. If you'd like something more keychain sized, the Nitecore SENS series comes in several sizes and battery types, and automatically adjusts the brightness of the beam based on the light's orientation. Aim it at your feet and you get a soft glow; aim it off into the woods and it grows steadily brighter.

Let's be honest, a pen is going to get lost. The best pen is one you like enough to keep track of, but one you won't miss too terribly should some co-worker walk off with it. I like the Zebra F-301. Writes smooth, classic stainless steel good looks, and comes in RGB & Black. Notebooks depend entirely on personal preference too, but the smallest Moleskine is easily pocketable and has 32 lined pages.

In my mind, there is only one name in multitools. Leatherman has a kick-ass reputation, a 25-year warranty, and a plethora of tools to suit any need. For the casual EDC, I'd go with what I believe is the second-lightest full size tool, the Skeletool. 7 functions include a knife that opens while the rest of the tool is closed, the ubiquitous pliers/wirecutters, two double-sided bits and a driver; and it looks so. freakin. cool.

I dunno much about guns except that of all the things I've listed, a pistol should be the one you consider most carefully, especially whether you need it or not. It's a big investment and a bit of a lifestyle adjustment if you decide to go CCW. I've always heard 9mm and up, so use that as a jumping-off point.

First aid kits are useless unless they're both small enough to be carried anywhere and large enough to contain anything you might need. Making your own is a good idea because you have the best knowledge of your environment, but I found a couple on Amazon which seem to have most of the basics without too much fluff or bulk. The first could be stuffed in a jacket pocket, whereas the second would be useful in a car.

I hope I helped. Good luck!

[Kershaw Scrambler] (http://www.amazon.com/gp/product/B00I04MOIO/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1)

[Kershaw Leek] (http://www.amazon.com/Kershaw-1660BLKW-Folding-BlackWash-SpeedSafe/dp/B00J14BOBU/ref=pd_sim_sg_6?ie=UTF8&refRID=1MHD47WR72RJ9HJVWCZN)

[Cold Steel Voyager, 3 inch] (http://www.amazon.com/Cold-Steel-Voyager-Tanto-Plain/dp/B00322LQB0/ref=sr_1_5?s=sporting-goods&ie=UTF8&qid=1417535788&sr=1-5&keywords=cold+steel+voyager)

[Fenix PD35 2014] (http://www.amazon.com/Fenix-PD35-Flashlight-EdisonBright-Batteries/dp/B00DR9GWX0/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1417536075&sr=1-1&keywords=fenix+pd+35)

[Nitecore SENS AA version]
(http://www.amazon.com/Nitecore-Flashlight-Active-Dimming-Lumens/dp/B008J4CHNW/ref=sr_1_2?s=sporting-goods&ie=UTF8&qid=1417536301&sr=1-2&keywords=nitecore+sens)

Zebra F-301

[Moleskine "Cahier" Notebook, pack of 3] (http://www.amazon.com/Moleskine-Cahier-Journal-Pocket-Ruled/dp/8883704894/ref=sr_1_1?s=office-products&ie=UTF8&qid=1417536675&sr=1-1&keywords=moleskine+small)

[Leatherman Skeletool] (http://www.amazon.com/Leatherman-830846-Skeletool-Multitool/dp/B000XU9NXW/ref=sr_1_1?ie=UTF8&qid=1417536920&sr=8-1&keywords=skeletool)

[Small bag or pocket first aid kit] (http://www.amazon.com/AAA-Piece-Commuter-First-Aid/dp/B000SL0R9K/ref=sr_1_2?ie=UTF8&qid=1417537142&sr=8-2&keywords=first+aid+kit)

Larger car first aid kit

EDIT: aspace

5 knives

Above is a link to 5 folding knives that may or may not fit what you're looking for and 4 are well within your price range of under $120. One is slightly above at 139.00 on Amazon, but the Chrome extension called Honey is currently allowing a $10 discount. All are made by Kershaw/ZT.

1. The ZT 0350 is the top knife with the curvy ergonomics to it. It's probably the most basic ZT folder and is currently the only ZT knife I own. It is good for larger hands, it's very sturdy (and heavy) and technically more than $120 but only barely.
   
   
2. The Kershaw Fatback is next to it and has a more triangular appearance. Relatively newer offering from Kershaw, I think, but is certainly proving to be popular. It's as long when closed as the ZT 0350 but is thicker from one scale to the other on the handle AND is lighter. The actual specs for this and all the knives mentioned can be found by Googling them. This knife is currently under $25.
   
   
3. The Kershaw Skyline is probably the most well known knife, I wouldn't be surprised is this has its own lore here on r/knives. It's popular for a reason being lightweight, and well tested as an older, mainstay model from Kershaw. As you can see, mine is showing wear and scratches compared to the other knives! Amazon is currently listing the basic version of this knife for $46.
   
   
4. The next one is the Kershaw OD-1 which is DISCONTINUED. I didn't know this when I took a photo of it for you and started this list. This means the price is higher than you'd pay normally and isn't really available on Amazon or in stores. You can find it on the link provided (I think) which is to one Stop Knife Shop, you can also try Ebay or Bladeforums to find a used one. The link provided appears to be offering this knife for $53, but I don't know what condition that's in. The one I bought on Amazon back in like 2013 or whatever was ~$30-$35. I actually have two of them, but I'm not sure where the other came from. They are cool knives, fun to play with, but not tacticool.
   
   
5. The last one pictured is the Kershaw Cryo and is currently available on Amazon for ~$19. It is the smallest of the knives shown, smaller than the Fatback with the triangular handle by what looks like 2 inches when open. This would be a great beater knife, something that would be a fine flipper and used briefly but would not be comfortable for extended use, especially in large hands. If memory serves, there's two different Cryo models with 2 different sizes, but I have only the one you see. Could be the smaller of the two models.
   
   NOT PICTURED but I do also have the Kershaw Blur which Amazon is listing at ~$35 currently which is HIGHLY recommended even though it doesn't have a flipper. It's spring assisted opening and a very comfortable grip for larger hands. That price is so good, they're normally $55-$60 that I'm grabbing one of them again as an extra.
   
   I could list like 4-5 more Kershaw knives but my comment is too long already. If you would prefer more variety in recommendation, Spyderco has some solid options but if you want to go BALLS DEEP into tacticool, one of my most valued knives because it was bought for me as a gift was the Cold Steel AK-47. This knife is quite a bit larger than the ZT shown but is nearly the same price at ~$125-130 on Amazon. You might be able to find it cheaper on Ebay. Be careful though, there is the regular and mini version!

Hi! And welcome!

I like the Gayle Bradley 2 in M4, and the BM Valet in M390, but they are both very expensive to start out with. The Shuffle II is kind of crappy - I'd definitely pass on that one. I have no experience with
the Bartender Defeder, but even the XL version looks too small, as is the Rodie. The Delica and Leek are great knives, and would likely be solid options (their ergonomics are better than their handle lengths suggest, especially the Delica). The CRKT M16 is ok, but it's not great (in my opinion). I've never handled CRKT's Endorser, but it looks like a solid choice.

My best suggestion is a RAT 1 in D2. It's 40 bucks and you get a very well-made knife in D2 (semi stain resistant and will hold an edge for a good long time). The AUS-8 version is good, too, but if you're cutting boxes, the D2 option will stay sharp way longer.

As for some other options, here are some good ones from CRKT:

Foresight - It's big and comfy in-hand, but it's expensive for the materials used (aluminum and AUS-8)

Shenanigan - lighter and cheaper than the Foresight, but with the same blade material (AUS-8)

Outrage - aluminum handle and 8Cr13MoV steel (similar to AUS-8, id est, reasonably stainless, decent toughness, ok-ish edge retention), ball bearing pivot (nice and smooth!)

Ripple - aluminum handle, 8Cr13MoV blade, ball bearing pivot

With these suggestions, it may seem like I'm a shill for CRKT, but I'm not. I'm just a fan of Ken Onion's designs and ergonomics. I also like:

Spyderco Endura - very good stainless steel in a lightweight package, with plenty of handle real estate

Byrd Cara Cara 2 - Spyderco's value brand (basically a cheap Endura with 8Cr13MoV steel instead of the excellent blade steel VG-10)

Spyderco Resilience - big and comfy (G-10 scales with 8Cr13Mov steel), and my daily carry at work

Spyderco Manix 2 - light and medium sized (they also make an XL version), with BD-1 (kinda similar to AUS-8, kinda)

Cold Steel Recon 1 Spear Point - a big knife with lots of grippy G-10 handle space. The CTS XHP steel is the bee's knees, and the Recon 1 is an excellent value, but it may be too expensive as a starting point.

Also, I'm sure some other folks will chime in, too. The guys & gals of /r/knifeclub are pretty knowledgeable and helpful.

Again, my number 1 suggestion is the RAT 1 in D2. It'll be hard to beat interms of construction, ergonomics, and utility.

Happy hunting!

Traditional SAR, the teams you will find around the country operate in a whole different world than the military. For the most part you can sort of look to volunteer firefighters as an analogy, even then they tend to be more regimented than SAR. There are some SAR teams out there that have more of a military structure to them, but most of what you will find will feel more like SAR clubs (think chess clubs, hiking clubs, etc). My unit meets once a month, we have a business meeting with the whole review last month's minutes, reports on events since the last meeting, old business, new business, etc. After that we conduct a classroom training session on topics like Lost Person Behavior, Medical Techniques, Navigation, etc. We also conduct regular field trainings to bring it all together. We don't have ranks, we have a list of skillsets and we are each typed according to our ability in each skill. Our unit and all the units I know don't work with weapons, sure we carry knives, but the biggest blade most of us work with is one of these, not some giant thing that rambo would carry, no machetes, no hatchets. If there is a situation where SAR skills are needed for say a fugitive, we stay home. We have done evidence searches for things criminals have tossed into the woods, but they were already in jail.

SAR in the military is their own thing and while we can and do work together on missions they are a unit that stays a unit. When we ask for military assets we indicate what needs to be done and they tell us what they are sending and what it will do. If I show up on a mission with 5 other people from my unit we might be on a team together or I might get put in with members of a different unit.

When it comes to the actual searching it is simply a lot of covering ground. We walk, and we walk, and we walk. 99% of the time we get nothing, there are only so many clues out there. There is one really awesome clue (the person or thing you were out to look for) and tons of acreage to cover. We often start from a last known point and try to move that further along in time. An example we were out looking for a mushroom hunter, when I showed up they new where he started into the woods, we then found a clearly picked mushroom and a couple of boot prints. That advanced the last known point a few hundred feet and gave us a second breadcrumb to work with. It takes a certain type of person to do that effectively. I have seen plenty of people bow out because they had been on maybe a dozen searches over several years and never found a thing. One of our radio operators has been on 8 missions, each ended in a recovery. My hope when I got in was to find a clue at some point, and Oh Boy my first time out I got the find, I found the 24yro woman who had hanged herself. We don't have an obligation to respond to one call or another, but you also don't get to decide who gets lost and when. You also have to get along real well with the others on your team. I've been on all sorts of teams and there are people that I know I don't want to go out with, and certain combinations of people that I won't go out with.

With every one of your responses I feel more and more that SAR wouldn't be a good fit for you now. Most units welcome visitors, I would say that you might consider finding one of the local unit's meetings and checking it out. Attend a few meetings before even considering applying, and talk to the people there and be honest about what you are looking for. Once you get started into it there is a substantial investment in time, energy, gear, and training on the part of you and your team. It isn't worth it to go through a bunch of training and getting geared up to not be a productive member of a team (remember finding nothing is something). I'm not sure what exactly you are looking for, but I don't think SAR is it. There is always a "who knows?" aspect and if you spend some time around a unit you may find that it is a good fit, or that your outlook might change. Our mountain rescue unit has people "hang out" around them for several months before offering them an application, in their world they have to trust their lives to their team. While the regular old SAR doesn't require the same standard it is very easy for someone (as good at it as they may be) to be more of a distraction than a help.

TL;DR
I don't think SAR is going to get you what you want. If you do feel like continuing down this path talk to the people in the unit(s) in your area, be honest, and don't take it personally if they tell you "no".

For the record, I feel the same that the Cryo is too slippery - which is why I'm super glad Kershaw released a G10 version of it last year.

I also agree that the Tenacious is just a bit too big for EDC - and they do make the Persistence, which is a shrunken version of the Tenacious, with a 2.75 inch blade vs the Tenacious' 3-3/8 inch blade. If you wanna go even smaller, the Ambitious has a 2.25" blade. All 3 knives share a similar design (though the Ambitious is small enough that the proportions might look a little weird to some).

A few other knives of note that are standouts in the sub-$50 price range:

• CRKT Ripple - Ken Onion design with a more-traditional drop point blade, IKBS, 8Cr14MoV. Usually on most people's "Under $50" list.
  
  
• Kershaw Leek - Again, a little slippery and still Speedsafe but a slightly weaker torsion bar so not as forceful. Some people have issues with broken tips since they're a little thin, but this thing was the best under $50 when it came out.
  
  
• Ontario RAT 1 - At $25 this thing is a pretty great package, if not a little big. 3.5" blade, but it's AUS-8 if you don't like the 8Cr China steels (even if they are pretty similar).
  
  
• SOG Flash II - again, a 3.5 inch, AUS-8 blade. Assisted opening, but much less forceful than Speedsafe.
  
  
• The Kershaw Emerson CQC-6K has blown up since it's release and a lot of high speed low drag tactical types love it for EDC use. $25 makes it a pretty appealing choice and rock solid under $30.
  
  
• The Spyderco Delica 4 is just a touch over $50, averaging about $60, but it's also a go-to knife in the $50 for many people. VG-10 steel on this one is a big selling point.
  
  
• On the same hand, the Kershaw Blur is usually available for about $60, and for those looking for a big folder (seriously this thing is large) it's a great choice. Sandvik 14C28N as standard steel, also available with S30V for about $75.
  
  A few notes here
  
  
• You'll see a lot of sub $50 knives using 8Cr13MoV or 8Cr14MoV. The main difference is a little more Chromium in the 8Cr14MoV, leading to a little more corrosion resistance. A lot of people loved the Skyline, but there were a few issues with minor rust spots on the knives, leading to many companies switching to 8Cr14MoV for some of their knives (most of the budget Kershaws are 8Cr14MoV now).
  
  
• Kershaw has many many options for budget folders under $50, for all kinds of aesthetic tastes. The Chill, Thermite, Link, Oso Sweet, etc. I've owned a handful of Kershaws, and loved all of them, especially for the price.
  
  
• The 8Cr steels (13MoV and 14MoV) are pretty much on par with AUS-8, especially from CRKT, Spyderco, and Kershaw who all do a good job on their heat treats. There's a slight difference in hardness (3 to 4 HRC difference by most counts), but really they're nearly identical for all intents and purposes, mainly sharpening and edge retention. Some people just prefer AUS-8 because they don't like so called "China steel."
  
  
  ETA a few more links and some clarification of my still-awake-at-5am rambling.

Let's get some participation in this sub!

Other things like my wallet, phone, pistol, and keys come and go as a college student-turned-graduate, farmhand, and product distribution specialist, but these are two things I keep with me almost all the time.

Spyderco Endura 4, blue

I've carried this for over two years now. I love it and would quickly and happily buy another, if I was careless enough to lose it. Which is possible.

Leatherman Wave with the frame painted blaze orange.

I can't believe I forgot to post this last summer! (Actually, I can believe it - no internet on the prairie.)

I've carried the Wave for a year and a half. This thing has saved me a few times. A few small things like "Where did I put those pliers/wire cutters" and "I wish I could could snug up these sunglasses" and "Damn, this screw is loose." But the one time it really saved me was one night last summer on my uncle's ranch. I was a recent biology graduate, and unemployed, so I volunteered to help my uncle and cousin on their ranch. I was alone for a few days and was mending fences and checking the cattle - seeing where they were grazing and making sure all the cows, calves, and bulls were healthy and accounted for. I'd just finished up after sunset. There was a young calf that had lost its momma and was wandering all alone. We have a pretty bad coyote problem around here and a possible mountain lion in the area, as well. I'm pretty sure the calf wouldn't have made it overnight. (Sometimes cows "park" their calves in a covered area while they wander elsewhere. In those cases, the calf won't move even if you walk up and touch it. Pretty crazy. In those cases, it's usually best to just leave the calf alone, as the cow will find it again. This wasn't one of those times.) The calf was up and wandering in an area pretty far from where the cows were. I was actually pretty lucky I found it.

After chasing the calf toward where the cows were and reuniting it with its inexperienced, first-time mother, and being very tired, I was driving the John Deere Gator back to camp a little faster than I should have, and ran into/over a small tree stump. Anyone who's driven a Gator for long can tell you it's worthless in low traction and rides stupidly low. So I was looking at having to walk the mile or so back to camp and be Gator-less until I could drive a pickup there to pull it off the stump. But I didn't want to do that. These were the tools I had available to me, as well as the knife, but I didn't include it in the picture at the time, because it was irrelevant. I had tried backing up, rocking it, jamming the pedal down with a stick and pushing with all of my might, stacking branches beneath the tires, and prying it up and off with branches. All of this has taken me about an hour and I'm almost ready to start walking, when I finally use my brain. I couldn't cut through the whole stump, but I could get the tallest part off, and it would have been enough to get it unstuck. I set to work for the next ten minutes with the saw and chiseling out bits of wood with the screwdriver and hammer. Once the top bit was off, the Gator came off rather easily. I drove back to camp, exhausted and pleased with a full day's work.

But as I was undressing, I realized that I'd left my Leatherman in the dirt. So I had to go back immediately. Good thing I got the orange one! Here's a picture of the stump after all was said and done. And the ruts I made. The stump is the gray spot to the right in the center of the ruts.

Just goes to show that your tools are only as useful as your smarts allow. Remember to work smarter, not harder.

I do quality control and put stuff in boxes for a major electronics distributor.

Edited to add what I posted in /r/EDC.

I'd actually start a little lower if I were you, then work your way up. I started with a Spyderco PM2 ($125ish) and then actually went down to some more budget friendly knives. You can get some TREMENDOUS value out of a few budget blades available right now. Here's a few that I HIGHLY recommend.

Top Pick: Sanrenmu Land 910+ or 9103. I'd choose the 910+ because it's got nice grippy scales and is easier to open/close than the 9103.

Compact, Lightweight, and Classy: Kershaw Atmos. Fantastic action, well known designer, nice and compact.

Workhorse: Spyderco Tenacious. This thing is built to cut. Nice and thin blade stock with a full flat grind, cuts like nothing else. Carries really well too.

Those are three of the best started blades on the market IMO. There's a lot more value in these than in some of the other commonly recommended blades like the Ontario Rats. If you do want to spend your full $100 budget, I'd just pick up all three of these. That way you can figure out exactly what you like before committing to one expensive knife purchase. Plus, once you do, you can hold onto the budget blades for backup knives or sell them over on r/knife_swap.

I hope you find the right knife for you. Good luck!

first and foremost, find a hunter safety class and take it. there is an online option now but I really recommend going to an in-person class. I did this when I was 11 or 12 and remember some very experienced old timey hunters explaining everything. we even got hands-on experience with some old 22's and got to shoot them at a range.

they will cover most of your questions, and will go over gun safety and how to hunt safely (identifying your target, whats behind your target, etc). They should also cover the basics of field dressing (removing the organs out in the field).

If you want to hunt deer you're going to want a rifle of at very minimum .243 caliber (preferably higher, i hunt with .30-06). Hunting rifles as of this moment cannot be semi-automatic although there is a real possibility this will be changed by next hunting season. (Even so the most common AR-15 which is .223 caliber is too small for hunting deer.) A .270 is a common whitetail caliber, big enough to take down a deer but not going to kick as hard as .30-06 or .308.

When you buy your hunting license, it comes with one tag to harvest an antlered deer. The rules of what makes a deer count as "antlered" vary from region to region but for most of PA it requires at least 3 points on one side. The paperwork you receive will also have a form you must mail in to your county treasurer to apply for a doe tag. The doe permits are limited and the earlier you apply the better your chances are. A doe tag is only good for the zone you applied in.

If you want to hunt rabbits and birds such as pheasants or turkey you'll want a shotgun. Most people would hunt with a 12 gauge but if you've got a smaller frame you might want a smaller gun (16 or 20 gauge). Turkey requires a tag similar to a buck, which are included in your regular hunting license.

Ducks require a special stamp you can buy when you purchase your license, and there are rules about the metal in the shot shells when you hunt waterfowl (it can't contain lead).

if you're interested in squirrel hunting you can use a shotgun, but the more challenging way to do it is with a 22 rifle. This is a very small and inexpensive bullet.

If you've never handled a gun you're going to be nervous carrying it around with a shell in the chamber. The best thing you can do is take it a range (such as these) and go through a few boxes of shells practicing. A State Game Lands range is free to use as long as you have a hunting license. The one by me usually has a game commission officer there who would be happy to answer questions. Just practice, learn where your safety is, be aware of where the muzzle is pointed, and keep your finger out of the trigger guard. Also protect your hearing! You will need hearing and eye protection at the range!

you need to wear orange on your head and chest/back for most seasons in PA, the exception being some archery/muzzleloader and turkey hunting. Just get a hat and vest and you'll be fine.

Other gear: knife (I prefer a small fixed blade knife to a folder for cleaning deer; less places to get hair and gunk stuck), lighter, maps, emergency whistle, emergency blanket, drag rope (to get the deer out of the woods), rubber gloves (so you aren't a mess after cleaning a deer), and I bring a spare phone battery.

Like any other adventure in the wild make sure people know where you're going and when you should be home.

As you may or may not have recognized, this is the Condor Bushlore. Its blade is .125” thick made from 1075 carbon steel. The handle scales are walnut and the pins are brass (I think). The sheath is leather with stainless pins. These pictures are what it looks like after a weekend of extremely hard use in very damp conditions—I’ll talk more about this later. I took the pictures right after I cleaned it back up, and re-sharpened it.

I have been collecting knives for a while, and have quite a few, but did not own EVEN ONE fixed blade. I had a camping trip in the Finger Lakes region of NY, so I decided to pony up a whopping $31 and order one off amazon. When it arrived, the overwhelmingly positive reviews for the sheath were confirmed (it feels very high quality) as were the so-so reviews for the fit and finish of the knife itself. If you are looking for a fixed blade knife that is great to look at and fun to fondle, this might not be the knife for you. There is noticeable staining on the uneven handle scales, the pins and lanyard holes have grind marks on them (but are smooth to the touch), the grind is not a true Scandi (the blade had a secondary bevel when I received it, but it’s not a big deal, because I re-profiled it anyway), and the primary grind is actually uneven (this was brought out when I re-profiled it, one of the pictures shows this), and it came incredibly dull (hence the re-profiling).

So, how did it perform in the field? Very well! On two consecutive nights, in very damp conditions, it batoned through logs almost as thick as the blade is long, split about 9 bundles worth of wood (no-one had a hatchet) and performed other, less strenuous tasks like making wood shavings for kindling, carving tent stakes, and opening food packages etc. It was very comfortable to use, and held a good working edge for all of this. Now because it is carbon steel it did develop some significant surface rust, but that cleaned up very easily in just a few minutes.

In closing, this is a great camp knife for an incredible value. If you can get past the cosmetic imperfections, it’s an awesome little knife.

Let me know if you guys have any questions!

Lol, alright for example:

• Spyderco Delica 4 FFG: For your price range this is going to be the "best" steel you can get in a near 3" folding knife (VG-10). By best I mean the best edge retention in a stainless steel. However, being over 2.5" in some places (Chacago for example) the knife will be illegal. Also, many people do not like the look of the spyderhole as it can be seen as aggressive in office environments. Also the FRN handles, while very strong, have a cheap/plastic feel to them.
  
  
• Spyderco Tenacious: Compared to the Delica, 8CR13MOV is a "worse" stainless steel (not as good edge retention, more prone to chipping during heavy impacts). However, the extra blade length is better for many outdoor tasks (breaking down tree branches). The handle is also G10, which is slightly tougher and has a much better feeling in hand than FRN.
  
  
• Spyderco Centofante 3: A more "gentlemanly" and "office friendly" version of the Delica with a slightly longer blade. Again, VG-10 and FRN.
  
  
• Kershaw Cryo II: Same steel as the tenacious. Metal handles slightly tougher than G10. Flipper action has "cool" factor. The blade grind makes the tip a touch stronger than on the tenacious.
  
  
• Kershaw Skyline: One of the most iconic of Kershaw's knives. Hollow ground blade makes it great at slicing tasks.
  
  
• Esee Izula: Skeletonized fixed blade. 1095 Steel is significantly better than the other steels listed at "chopping" tasks as it is not prone to chipping at all. It is NOT stainless and so the blade has a protective coating over most of it. The steel will require mineral oil/cleaning to prevent rusting.
  
  
• Becker BK 24: Similar to the Esee Izula but D2 steel which has better edge retention and more corrosion resistance than 1095. It is also much harder to sharpen. Many think the BK24's handle is also less comfortable, the sheath is worse, and there are less available after market modifications.
  
  
• Ontario Rat Series (linked the RAT I. RAT 2 similar but smaller): Ontario's version of the tenacious. Bladeshape generally more people friendly. Another very popular beater option.
  
  
• Morakniv Knives (there are MANY, this is just one): Highly regarded in the "bushcraft" community. High carbon steel (similar to 1095) with a scandi-grind which is great for field sharpening and woodworking. Only partial tangs so not advised to use for battoning tasks or chopping.
  
  
• Kershaw OD-2: Gentlemanly knife with great flipping action.
  
  There are a LOT more suggestions I could add...

OK, I think I got this one.

For the younger brother I'd get the Spyderco Delica in one of the bright colors, as it is quite good (cool) looking blade.

It is also pretty light, so will make a great hiking companion.

Isn't the most heavy use knife out there, but will perform when needed.

For the older one I'd get the CTS XHP version of the Cold Steel American Lawman.

It is one of the best hard working blades out there (great for professionals who use their knife as a tool), has a strong lock for additional safety, steel that will hold up and a G10 handle with great grip to it.

Both are well within your budget (compare prices with other sites as well).

Good luck man, hope this helped!

This is the stuff I have on me most of the time. I’m a grad student and as you can see, I’ve been lurking here for quite a while. I’m basically an /r/EDC stereotype at this point.

• Saddleback wallet
  
• bullet space pen
  
• Nitecore p12 flashlight (winter . . . short days)
  
• Ruger SR9c (winter)
  
• Sig p938 (summer)
  
• Spyderco delica (summer)
  
• Benchmade 950-1 rift (winter)
  
• carmex
  
• phone
  
• keys
  
• N82 IWB holsters
  
  *Thoughts: I used to carry a FourSevens QT2A (I think?) and it fit in the pocket much better but was obviously much dimmer than the p12. I think i'll go back to a smaller flashlight next winter. I've also carried a Benchmade 707, 275, and several 556 styles. Of all of them I liked the 707 the best but I tend to give away my knives to anyone that takes interest and the 707's price had gone way up when I went to buy another one.
  
  The p938 is, of course, much easier to carry than the SR9c but I can't hit shit beyond 10 feet away and it only holds 6 rounds. Luckily the odds of me needing to hit someone more than 4 feet away are effectively zero. I kind of regret buying the Sig but it'll do for another summer or two. I highly recommend N82 holsters because they are so damn comfortable and secure compared to most others I've tried. The Saddleback ID wallet is amazing if you never need to carry cash, and I've not found a better pen for my pocket than the Fisher space pen. I also like to buy the space pens in bulk so I can give them away to people who take interest.

It depends on what you need. I enjoy Schrade knives, and some good options are:

• Schf9. More if a yard tool than a knife. If you need to lug around 1+ pounds of quarter inch steel to make the wilderness your bitch, choose this. I briefly owned one of these before I came to my senses and returned it because it was too much ###KNIFE### for me. Large and heavy.
  
• Schf36. It's compared favorably to a Becker BK2, but it's significantly cheaper. Good balance between size and weight. Overall a solid survival and Bushcraft knife. The Schf36D comes with better handle scales.
  
• Schf42. Hailed as an excellent camp knife and a respectable Bushcraft knife. Lighter (and presumably a bit less beat-the-fuck-out-of-it-able) than the Schf36, but still a nice option.
  
• Schf30. My knife. It's a 5 inch blade with a super comfortable grip, and its weight is a bit over a third of a pound. Good option for a smaller, lightweight survival/Bushcraft knife. Not good if your hands are dummy thicc, as the handle is smallish.
  
  Only thing to look out for: Schrade sheaths aren't super good. They work, but they're not as nice as premium brands.

What do you use the Skeletool most for?

If you use the knife on it constantly and daily, then yeah, get a good knife. If the stuff that you do cut makes you nervous with the Skeletool then definitely get a dedicated knife.

If you use the bit driver or pliers on the Skeletool the most then you probably don't need to carry a dedicated knife.

Give the Sage 5 a good look as well if you are considering the Para3. I'd also strongly recommend finding a Spyderco/Benchmade/Zero Tolerance dealer and fondling a bunch of knives before making a decision on which knife to buy.

If you have never carried a dedicated knife before it would be a good idea to buy a cheaper knife or two before spending $100+ on a knife.

Could try something like the Spyderco Byrd Cara Cara 2:
https://www.amazon.com/Spyderco-Cara2-Lightweight-black-PlainEdge/dp/B0049AYJP4/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1499523866&sr=1-1&keywords=Byrd+Cara+Cara2

The Ontario Rat I/II
https://www.amazon.com/Ontario-Knife-Sp-Black-Folding-7Inches/dp/B00BBPAOCW/ref=sr_1_2?ie=UTF8&qid=1499523684&sr=8-2&keywords=ontario+rat+2

https://www.amazon.com/Ontario-8848-Folding-Knife-Black/dp/B0013ASG3E/ref=sr_1_1?ie=UTF8&qid=1499523956&sr=8-1-spons&keywords=ontario+rat+1&psc=1

Kershaw Cryo
https://www.amazon.com/Kershaw-1555TI-SpeedSafe-Folding-Knife/dp/B0074FI28Q/ref=sr_1_1?ie=UTF8&qid=1499523664&sr=8-1&keywords=kershaw+cryo

CRKT Squid
https://www.amazon.com/Columbia-River-Knife-Tool-Folding/dp/B00TFY39EQ/ref=sr_1_1?s=hi&ie=UTF8&qid=1499524020&sr=1-1&keywords=crkt+squid

Try some under $30 knives, pick one that looks like something you would like to carry, and pick something that is dang near the polar opposite. It will let you know what you like in a knife much cheaper. Differences in blade size, blade shape, handle shape and how they are used might change your opinion on what you think you need in a knife after using a dedicated knife for awhile. After that you can make a truly informed decision on a high-end knife.

You have a lot of good choices available within the $50 range. My personal two top choices for a small, inexpensive but well built folder would be the Ontario RAT 2 and the Cold Steel Tuff Lite. Both are under $30, easy to carry, and very capable. If you want more of that traditional look, go with the best Case model you can afford. Great Eastern Cutlery is really nice too for traditionals, but a bit more pricey. Another option might be an Opinel, classy and inexpensive.

Okay here are some suggestions

1. Wallet. I have not ordered it yet but [this] (http://www.amazon.com/gp/product/B002P4Y9EW/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A28SBX2GB3VZCT) cigarette case could work.
   
2. Knife: [Spyderco tenacious] (http://www.amazon.com/Spyderco-Tenacious-Handle-Folding-Plain/dp/B001EI7578/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1370136756&sr=1-1&keywords=spyderco) is $32 and a little more than 3 inches or the [Spyderco ambitious] (http://www.amazon.com/gp/product/B004MMSDHO/ref=ox_sc_sfl_title_4?ie=UTF8&psc=1&smid=ATVPDKIKX0DER) which is a baby tenacious with a 2 1/4 inch blade and $29.
   While they are not tactical opinels are really nice and are near $10 and come in lots of sizes.
   
   
3. Pens: I have a [zerbra 701] (http://www.amazon.com/Zebra-F-701-Stainless-Ballpoint-Retractable/dp/B002L6RB80) and a [Fisher space bullet pen] (http://www.amazon.com/Fisher-Space-Pen-Bullet-400/dp/B000095K9D/ref=sr_1_sc_2?s=office-products&ie=UTF8&qid=1370136956&sr=1-2-spell&keywords=fisher+space+ben). For the money the zebra is excellent, the bullet pen is nice but there is a tutorial on how to mode the zebra to take space pen refills which is the best of both.
   
4. I know you got the wave but I suggest getting a small mt like a sak or a leatherman ps4 or micra. The victorinox classic sd is good and about $10
   
   Also with all the stuff you want to carry, It might be wise to invest in a maxpediton micro pocket organizer which is about $15
   If you got any questions just ask.

If you really want a monster sized knife, sure. But I'd definitely get the carbon steel version that some others have suggested as well. It sounds like their quality isn't too bad.

However, I don't know if I'd really want to take something that huge hiking. Maybe SHTF-type hiking I suppose.

A couple of knives that I'd think would be similar priced or less (and have proven reputations) and would slightly more practically fall into the "only 1" category:

• Ka Bar Becker BK2
  
• Ka Bar Becker BK16
  
• Condor Bushlore - there are other Condor models that are great values as well, but might need a little touchup love.
  
• Morakniv - there is even one with a firesteel built into the handle
  
• ESEE 4 (this might be a tad more expensive)
  
• Ka Bar Becker BK7 or BK9 if you really want a huge knife, but I would definitely consider something smaller to piggyback on the sheath.
  
  Good luck regardless!

Depends on many things... and once you get to high quality knives, preference is a huge thing.

I enjoy ESEE-3MIL

They have one of the best warranties, but the price also reflects it.
it's 1095 high carbon steel, easy to sharpen and maintain, but can rust if you don't keep it clean.


You probably don't need a large knife for most things.

If you want to spend more on something fancy you can get a BUSSE




as everyone said... can't go wrong with mora for the price.. i'm personally not a fan though. I wouldn't say overall it's high quality, but the blade, where it matters.. is.


It's not too difficult to find a good camp/hunting knife. Like I said, mostly preference.

Just make sure you go with a good knife company or maker.

You can even find some real nice custom fixed knives for cheap from up and coming knife makers if you search around a bit.

Also, you could just get a folding knife.


if you want a super inexpensive one that's as legendary as the mora there is opinel no 8 - also carbon steel



or the Ontario Rat


anyhow, tons of options.

I've got a cheap sheffield and a cheap Winchester multitool, and a nice but very old Leatherman that doesn't open properly because I tried to cut wire that was WAY too thick with it and warped the cutters.

Now that I've got a new flashlight on my belt, I'm considering adding another multi tool. Not much room left in my pockets. Most days I could add a small multitool with the Burts Bees and leave the lighter home, but some days my phone has to join that pocket depending on the pants, or maybe a disc golf mini marker if I'm out playing.

So I'm pretty sure I want a leatherman, but 1) I don't know what my best value tool is (I wanted the Wave about 5 or 6 years ago and never bought it) and 2) I'm a little disappointed they don't come with a leather pouch any more. Wal-Mart has them locked up and in a clamshell so I can't really get them out to play with them.

What do you recommend, /r/EDC?


Here's the rest of my EDC:

Wallet - Dyno Mighty - Mighty Wallet - Wealth of Knowledge

Knife - Byrd Cara Cara 2

Flashlight (On Belt) - Nitecore P12 - 2015 Version

Pistol - Kahr CW9

IWB Holster (not pictured) - Comp-Tac Infidel

Spare Mag Pouch for Pocket - Desantis Mag-Packer

Phone / Camera - HTC One M8

I have this knife. I carry it every day, and use it a whole lot more than I ever thought I would. Never for self-defense, but it does provide a small bit of peace of mind just in case.

There's a few things I like about it:

It's cheap!

It's small and very well made.

It flips open like a switchblade, but isn't considered one. It also makes a cool sound when you do that.

It holds a sharp edge

The pocket clips don't wear out.

Sharpens nicely


You can carry a pocketknife anywhere in Oregon. It's no big deal whatsoever. Check out Oregon's Knife Laws here. Oregon is a super lenient state when it comes to knife laws.

Enjoy!

Papa Johns worker with Irma right around the corner.

Top Row (from left to right):

Oakley SI Half Jacket 2.0: $72 with knockoff polarized mirrored lenses bought on amazon here for $20.

Leatherman Pro Wave: Not a special edition of Wave, just bought through Leatherman's Pro program. $55 with the clip found here for $5.

Timex Ironman Classic 30: Great $30-$40 digital watch that through everything has yet to hiccup, let alone fail, once.

iPhone 7: Matte Black. I'm one of those people who actually doesn't love or hate apple of android. I just happen to have a macbook and an iPhone, and that works for me.

Otterbox Symmetry Series: Wanted a $35 case to match my phone and got one. Lint and dust all over the port openings and inside the case?! Works great, just likes to get dirty.

Oakley SI Flak Beta Prism: $117 through Oakley's standard issue, these are the steel frames thanks to some confusing customer service calls. Polarized lenses with their mumbo jumbo technology actually make colors pop a bit.

Middle Row:

Black Leather Wallet: I don't know, probably found at Kohls or something. Nothing special, just gets the job done.

Field Notes Expedition: Awesome $13 notebooks that use a plasticy paper for writing in any conditions. Finally halfway through my first book, as I like to use all of the real estate available on each page. A bit worn, but character, right?

Amazon Special Wristwatch: There's so much conflicting branding everywhere, who knows who makes it. Anyway, have had it for a while and it seems to tell time. The band is a bit weird, but what would one expect for $16?

Car Keys: RIP me. I drive a minivan. sigh. Oh well, it's what I got.

Bottom Row:

Spyderco Tenacious: Perfect $40 knife if you don't want a beater and also don't want your wallet to scream in agony. I just need a good whetstone set to be able to do it justice.

Bose Soundsport Earbuds: Stay in my weird ears. I exercise regularly, but that doesn't mean I like it. Music helps me forget the lactic acid burning my muscles. They don't make the audio-only ones anymore, so here's a $99 pair for apple devices.

Wristbands: Air Force Academy in blue and Domestic Violence in purple. I wear these because I don't want to expose myself to the world of "Etsy." yikes.

Chrome Fisher Space Pen Bullet With Clip: ~$20 and so damn slippery. Awesome pen for being a pen, but I need something more practical for greasy hands. Any ideas? Not looking for anything more than like 30 bucks.

Kizer Vagnino Velox 2: A beautiful flipper on ballbearings. HOLY cow this thing flies out with vengeance and feels like a million bucks. A true gentleman's folder. However, I am not a gentleman... I see some ugly grip tape in it's future to make up for impracticality of no serrations on the back of the blade or handle for grip. Before anyone tries to complain about a 17 yr old with a $200 knife, I found 'er on Massdrop for $82 after shipping. Would I say it is worth the 13 hours of work needed to pay for it? Yes. Yes I would.

Awesome advice, all of the above models would be quite suitable. For pure woods use, something with a brighter color would probably do quite well for you. But I'm going to have to stick my neck out for some downvotes as well by disagreeing with the half-serration comment. I don't see it as "tactical," at all. I tend to prefer a half-serrated blade. I like serrations for cutting things like rope, handfuls of plastic sheeting, etc. If you just want a knife for the woods, you might not worry about it. I have knives that I carry with both types of edge, but I usually gravitate back to the half-serration. My personal every day carry is an older generation of Spyderco Endura which has a 4" blade, but is very light, well made, and strong. They make a 3" version called the Delica which I carried a lot when I was younger. You can get a perfectly serviceable knife for a lot less, but I've been carrying these for almost 20 years, and my current one has been through a hell that no knife deserves. They make them with plain edges as well, I've had them, but I don't tend to like them as much. Good luck, and I feel like pretty much everyone should have a knife. You just never know when it might be useful.

First of all this is the item i think you will purchase with this order - http://amzn.com/B00006IE7L

Now for my list.... prepare to get wood ;)

1. http://amzn.com/B003373NCO - Marble Wood, occasionally known as Cake Wood.
   
   
2. http://amzn.com/B00C3UQZVS - Osage Orange wood, orange like simon's hair.
   
   
3. http://amzn.com/0670759074 - Book, what wood is that?
   
   
4. http://amzn.com/B004TNWD40 - Swedish made Mora knife. would cut through a steak as if it were water
   
   
5. http://amzn.com/B008X2ZFG6 - Camelthorn wood, named after an animal.
   
   
6. http://amzn.com/B0032YUTP2 - Cocobolo wood, has streaks of purple when freshly sanded.
   
   
7. http://amzn.com/B005H59GN0 - Pocoyo Racing, a game I've wanted to buy my son for a long time.
   
   
8. http://amzn.com/B008GUSPB2 - Masturbating to my most favorite wood species should be considered a guilty pleasure.
   
   
9. http://amzn.com/B005G2G4D4 - A tool, this was easy
   
   
10. http://amzn.com/B009FBJ7WM - From my childhood, Nike high tops.
    
    
11. http://amzn.com/B009ZD6D1I - Carving set with organized display case.
    
    
12. http://amzn.com/B00123YCQC - Carving knife set, for my hobby
    
    
13. http://amzn.com/B00DXNYWLO - Kiridashi Kogatana blade, nerdy.... because ninjas.
    
    
14. http://amzn.com/B007AS3PPW - Ancient Bog Oak wood, naturally black from being in a swamp for 1000+ years
    
    
15. http://amzn.com/B004JTTWWK - Spalted Tamarind wood, sometimes known to contain streaks of pale green.
    
    
16. http://amzn.com/B00465DUVG - Nike skate shoes, something you wear.
    
    
17. http://amzn.com/B006HFU6HY - Macassar Ebony wood, funny because it smells like B.O when you cut it.
    
    
18. http://amzn.com/B004JTQDM2 - Hackberry wood, comes from a flowering tree. Without bees it could not reproduce.
    
    
19. http://amzn.com/1551052741 - Book about trees and shrubs, could potentially be used to select ornamental species for a garden.
    
    
20. http://amzn.com/B009ZD6D1I - Deluxe woodcarving and palm tool set by Flexcut, My most favorite Item.
    
    Thank you so much for the contest, I had alot of fun putting this together. Happy Happy cake day /u/ask_seek_knock! and good luck to everyone!
    
    
    
    

• ~$7-8 Sanrenmu 7010/710 - You can find these at Gearbest for cheap as hell when they have sales but they're absolutely $30 worth of knife
  
• ~$10-20 Opinel no.6-12 - Depends on blade size/steel/handle wood. #6 is under 3in blade if that kind of thing matters.
  
• ~$20 CRKT Drifter
  
• ~$20 Spyderco Byrd Cara Cara2
  
• ~$20-25 Ontario Rat II or Rat I
  
• ~$30 Victorinox Cadet Alox
  
• ~$30 Kershaw Cryo
  
• ~$35 CRKT Ripple
  
• ~$35 Spyderco Persistence
  
• ~$40 Kershaw Skyline - Often on sale in the ~$30 range
  
• ~$40 Kershaw Leek - Same sales as with the Skyline \^^
  
  Honorable Mention: Case knives. Traditional lockbacks. Hard as nails and pretty to boot. True pocket knives. Your grandfather (possibly great grandfather) had one. Good stuff the lot of them. $25-50 will get you a legacy knife that you can carry and use and then pass to your kid.
  
  You don't need to spend $200 to get a quality, durable, reliable knife. I've owned all of these knives at one time or another and loved every one of them. Sure they needed sharpening more often and sometimes something a little more drastic (Sanrenmus are often cheaper to replace than fix) but the value is insane. Plus, lets face facts; we're much more likely to break out our Cadet when we get box duty than our Sebenza.
  
  Knife enthusiasts (brothers) if there's a weighed and measured cheapo that I forgot, let me know.

$150 is plenty of budget for a good knife. This one is just slightly over that budget but will last you the rest of your life. It's kind of my dream survival knife.

The Fallkniven F1 is very popular as well and right in your price range.

Currently I use this knife which is also very good.

If you want to go a little less expensive still, Becker makes some good ones such as the Bk16. I know the Becker doesn't look anything like "hand made", but I have the BK2- I used paint remover to take the black coating off the blade, replaced the plastic handles with micarta and stained it to look more like wood, and built a leather sheath for it. It's a beautiful knife now. Too bad it's so goddamn heavy.

You could also go with something like the Mora bushcraft. I have that one also, very decent knife.

You could even just get a regular Mora or a Condor bushlore which are even more economical options.

There are some aesthetically pleasing knives here, but I would encourage you to look into some things with a bit more functionality. While any of these may appear to function well, a properly made knife will treat you much better in the long run.

This Kershaw is inexpensive, has good steel characteristics and is well assembled. I encourage you to get one or possibly something recommended in the knife buying guide and compare to some of the knives in your collection.

The delica is a pretty great option for whittling. It's a high carbon blade, so it holds up to wood fibers and hard use pretty well. It's got a solid lockup and zero blade play, so control and safety are taken care of. But honestly, it's a better EDC tool than a carving knife.

Another good option I'd throw out for you are high carbon mora blades.

You might also dig this. It's specially made for wood work.

Well, I prefer a lighter EDC, so i'd recommend the

• Kershaw Skyline
  
  This one is a very nice EDC for most people who use a knife for lighter tasks such as box cutting, opening packages and the like. I would not recommend this for someone who tends to use their knives for "heavier duty" tasks.
  
  
• Kershaw Leek
  
  Pretty much the same recommendation criteria as the Skyline, but this knife is both spring assisted, and has a more "delicate" point.
  
  
• Spyderco Delica
  
  Probably one of the most recommended knives for someone who wants an overall solid EDC at the price point with a lot of versatility and good overall durability. I own one myself, and this one is great for EDC.
  
  
• Ontario RAT 2
  
  The Ontario knife company really hit it out of the park with the RAT series, the Ontario RAT model II is a better choice for EDC over the RAT model I, mainly because the knife is a bit smaller putting it at about 2.75" blade and less "intimidating" for someone who needs for EDC.
  
  
• ESEE Izula
  
  I really like the Izula as a fixed blade EDC knife, it's a fucking tank and you can be sure you can rely on it everywhere, but it does lose some versatility and convenience because it isn't a folder.
  
  --------------------------------------------------
  
  Please keep in mind that these are just my suggestions and reviews, if you have any questions, please don't hesitate to ask me anything.
  

That is a very good range, great price point for awesome hunting knives.

Here’s a couple all purpose bushcraft/outdoors knives:

The Benchmade Buschraft: Micarta scales and a very nice leather sheath put it at $200 even. Benchmade is made in the US and is very well known for their high quality and their great warranties. I just bought a Crooked River and am enamored by it.

https://www.amazon.com/Benchmade-162-Bushcrafter-Drop-Point/dp/B00B0E1MB6/ref=mp_s_a_1_1?ie=UTF8&qid=1549089167&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=benchmade%2Bbushcraft&dpPl=1&dpID=41uGBLFBQNL&ref=plSrch&th=1&psc=1

Next up is the Fallkniven F1. It’s got a composite rubber handle but is still full tang. Made out of VG10 which means high rust resistance, great for bloodwork in the cold when you don’t have a lot of time to clean it. This brand is out of Sweden and those dudes know their outdoors gear. I could go on and on about them but there’s not much more needed to be said. At $115 you’re getting an incredible knife for a hell of a price.

https://www.amazon.com/Fallkniven-F1-Thermorun-Handle-Sheath/dp/B001JA9Y66/ref=mp_s_a_1_1?ie=UTF8&qid=1549089232&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=fallkniven&dpPl=1&dpID=41BlkNY8VfL&ref=plSrch

Now look at the Esee 6P, this is a good example of everything a knife should be and no more. Its 1095 high carbon steel so the implication would be to keep it cleaned and oiled, but there is a DLC (diamond like carbon coating) so it will keep the rust at bay until it wears off over time. $116 is a modest price, especially for the size of this particular knife.

https://www.amazon.com/ESEE-Desert-Molded-Polymer-Sheath/dp/B0049TYBL2/ref=pd_aw_sim_468_1/147-9912666-5096041?_encoding=UTF8&pd_rd_i=B0049TYBL2&pd_rd_r=35b4fb85-26b5-11e9-a2ee-7323802ef2ad&pd_rd_w=EV1gz&pd_rd_wg=WIYnq&pf_rd_p=469620d9-3e90-496d-9dc8-b19f900ba5fe&pf_rd_r=VEHBMYRN110K86ZGZE9G&psc=1&refRID=VEHBMYRN110K86ZGZE9G

That being said I don’t know a great deal of “brand name” filet knives but what I can assure you of is that there is no more a reliable product than a Morakniv. They literally have a knife for every job, and they’re all incredibly robust and utilitarian. Don’t let the low price point fool you, they are worth much more than the company charges. These are made of 12c27n sandvik steel, again in Sweden. The steel is good stuff, nothing glamorous but still a step above 440c. They have awesome belt clips that are just as simple as can be and I couldn’t personally suggest a whole line of knives other than Morakniv.

https://www.amazon.com/Morakniv-Fishing-Comfort-Stainless-6-1-Inch/dp/B00EAL1HI4/ref=mp_s_a_1_2?ie=UTF8&qid=1549089826&sr=8-2&pi=AC_SX236_SY340_QL65&keywords=mora%2Bfillet%2Bknife&dpPl=1&dpID=31IMwXb73cL&ref=plSrch&th=1&psc=1

It's really important that you get a tool that's right for you. As you notice, I don't recommend planes, the other guy did.

I have reasons but they are mostly my own. For eexample I wouldn't recommend planes because they will only work when working on straight grain. The moment you encounter a knot, you'll be struggling. And on top of it, planes are expensive and only the expensive ones are worth getting. A cheap drawknife or rasp works fine but a cheap plane is gonna make you cry.

Now, you were saying you don't wanna file for 10 hours. I think you're a little bit mistaken about rasps. You will probably be surprised how quick a good, coarse rasp is. They can devour wood. The reason why you need a rasp is because there will be spots in wood where the grain is running off. A cutting tool will struggle to cut when grain runs off but a rasp will still work.

Alright, I recommend the following. Get yourself a rasp. I have no particular recommendation. Check out ebay and see if you can get one there. If not, get one from harbor freight. Look for a big one. Possibly these 4-in-1s.

Then, get a Morakniv knife. The company is famous for making high quality bushcrafting knives. These knives are absolutely amazing for working on wood.

And a knife is better than a plane or drawknife if you don't have a workbench. Just place the wood against the ground and your foot and use the knife.

On Amazon for $14, the companion. https://www.amazon.com/Morakniv-Companion-Outdoor-Military-4-1-Inch/dp/B004TNWD40

It's one of their cheapest and great. They come with a scandi grind. It's the best grind for woodworking and easiest to resharpen.

You gotta be more specific in your original questions buddy.

First of all, there are 2 reasons to remove an animal from a trap. To rescue (and minimize harm to the animal), or to harvest (and minimize damage to the trap). Here in bushcrafter land, I wouldn't usually assume you aren't planning on eating what was caught in the trap.....

It does sound like you are looking for the rescue side of things, and this is for a film, and you are looking for realism..

A swiss army knife or basic folding pocketknife are fairly realistic options for what a typical person might have with them with just a general plan of being 'prepared'. Something like 4-5inch Condor Bushlore is a decent approximation for what a more bushcraft oriented person might have with them in a wilderness setting. Someone who is going out intentionally to rescue animals from traps though, that is an entirely different question! For that you'd want a blunt tip, the type found in rescue knives, and/or EMT scissors.

For realism, most of us here know enough about the various types of knife that we could likely give you good answers - but you really should explain what kind of realism you are actually going for.

Average outdoorsy person with basic 'preparedness' is likely to have something like this:

https://www.amazon.com/Victorinox-Swiss-Army-Huntsman-Leather/dp/B000IOI0NC/

Or this:

https://www.amazon.com/Gerber-Spine-Fixed-Blade-Camping/dp/B07DDCG3HD

Average Joe who has no idea of what makes a knife good or useful is likely to have something like this:

https://www.amazon.com/Tac-Force-Police-Assisted-Tactical-Rescue/dp/B01LZ0T3N9



Average bushcraft subreddit user probably has something similar to:

https://www.amazon.com/Condor-Tool-Knife-Bushlore-Hardwood/dp/B002CC6BPM

but wishes they had:

https://www.amazon.com/Benchmade-162-Bushcrafter-Drop-Point/dp/B00B0E1MB6

Someone going out with them intention of rescuing persons or animals would probably be carrying something like this though:

https://www.amazon.com/Victorinox-Rescue-Tool-Pocket-Fluorescent/dp/B000PX0LKG

https://www.amazon.com/Spyderco-Assist-Orange-Handle-Rescue/dp/B0012G6KI2

https://www.amazon.com/LEATHERMAN-832590-Raptor-Shears/dp/B07N6P2RCB

https://www.amazon.com/DGX-Titanium-Coated-Stainless-Shears/dp/B01B2YF0AM

And then finally, I'll say this - pretty much anything sharper than a butter knife can be used to safely rescue an animal from most situations. Hell I could probably do it with a can opener or nail clippers. So just decide what sort of situation you expect your characters to have intentionally been prepared for, and go from there.

https://www.amazon.com/GI-P-38-Can-Opener-5-pack/dp/B005EAIXAU

First and foremost, thank you for the contest. It was fun!

• For the old post Englishman in me I present you tea
  
  
• Though this will be with me almost always, I don't plan on keeping it very public hopefully for obvious reasons
  
  
• As for phallic, I have an entire NSFW WL for that, which I'm a little embarrassed about now ;)
  
  
• I'm not really a gamer but I do love this game, we played at my old job. Love it.
  
  
• These would help me start running again and get back into shape. Something I've been longing for but I'm really scared to do because of the health issues with my legs.
  
  
• A repeat but super helpful if I'm on a deserted island
  
  *edit: my format was weird so I fixed it.

Thanks, but I can't find a version with a plain blade, just with part serrated blade.

But in the suggestions at Amazon i found the Kershaw 1990 Brawler (link) which looks good. Not "as tanto" (can't think of a better description but I hope you understand what i mean) as I'd like but for the prize it seems like a good alternative.

https://www.amazon.com/Spyderco-Manix-Black-PlainEdge-Knife/dp/B002ECY7XI

One of the best sub $100 knives you will find with great ergos and an excellent steel to boot. Its a strong design that also cuts really well (better slicer geometry than my Izula). If you look around on /r/knife_swap and dont mind waiting you will see them go for anywhere between $70-80 bucks used still in excellent condition. Delicas and Enduras are also great and Sub $100 if you want something that carries more slim than the Manix.

What is your intended use for it? As an EDC knife I think it's not very good. The handle is a bit too thick for my tastes. The hollow grind clip point blade makes it more of a tactical blade. I am not a fan of a combo edge, especially on such a short blade (<6"). Like OldMan said, the 'patent pending' groove on it is pretty crappy too, get a Benchmade Triage if you want a quality cord cutter. The AUS 8 steel, isn't a bad mid-end steel, but for 10$ cheaper than you paid, you could have gotten a Spyderco Endura 4 FFG which has VG-10 steel and has a blade shape TONS better for an EDC blade (can also use a tactical in a pinch). The clip on it, as others say, is pretty awesome. It's one of my favorites.

If nothing else, the Trident does look pretty cool. I'd buy it as a collector just to look at, but I doubt I'd ever use it as an EDC blade.

For ~$30, get one of the "high-end" Moras. I have this one, it's very sharp, very comfortable, nice and light, and great for camp chores like food prep, whittling, cutting cord, etc.
For ~$120-$150, get a Fallkniven. The F1 model is smaller and cheaper, the S1 is a bit bigger, and I think the A1 is the biggest. They're fantastic; great steel, thick but not too thick blade, exposed tang, unbreakable handle. I took my Mora and my Fallkniven camping with me a few weekends ago. The Fallkniven was used to baton through dead wood to make firewood, the Mora was used for cooking and lighter chores. Neither one shows any wear, though they were both used vigorously. And they're both still sharp as hell.
Those are the two that I can personally recommend, and frankly I'm surprised that Fallkniven hasn't come up more here if you're willing to spend upwards of $100 on a knife. If you need to stick to a budget, then a Mora will never let you down. The ESEEs also have a great reputation and people around here love them, so you can't go wrong with those either, I just prefer the style of Fallkniven more than ESEE. One thing that everyone will agree on is to stay away from Gerber if you want a good, dependable blade.

A fixed blade would be perfect. Mora knives are excellent inexpensive knives that are quite commonly used for camping. They make some with wooden handles, composite handles, stainless blades, and carbon blades. My understanding is that their stainless blades don't hold an edge quite as well as their carbon blades, but carbon blades have the disadvantage of being susceptible to rust. So for an outdoor camping application where you're likely to be running around in dirt and mud and rain and lakes and streams and not likely to have a supply of rubbing alcohol, clean cloths, metal polish, and mineral oil, a stainless blade with composite handle would probably serve you best.

On the other hand, Cody London, that hippy dude from Dual Survival pretty much exclusively uses classic Moras with wooden handles and carbon blades. On the other other hand, he also doesn't wear pants or shoes.

Here are a few to look at.

This answer assumes 1) you want a few knives to cover different uses and 2) you can dig in the couch cushions for $3.53 or you can wait for Amazon's prices to fluctuate just a little bit. The price on the Kershaw jumped $3 just while I am typing this up...

EDC: Kershaw Blur, $54.17. I'm a little goofy, and I like the serrated tanto even though it looks like ass. I assume for most people, they'd prefer the straight blade. I've had one for a few years, and it works great. Just the right size, comfortable grippy handle, and I love the opening mechanism.

Camping knife: Condor Tool and Knife Bushlore 4.375-Inch Drop Point Blade, $36.41. The QA on fit and finish is apparently an issue with this company, but I didn't notice any problem on mine. It's not going to win a beauty competition, but its a hard worker. One of the comments on Amazon says it's the AK-47 of the knife world. I'm inclined to agree.

Inconspicuous Folder: Opinel #8, $12.95. I don't actually own one of these, so caveat emptor, but they come highly recommended by the hive mind. It's a classy looking folder that you could carry around in your suit's jacket pocket or your briefcase.

For fixed blade if you are gonna be using the knife for hard use then I would not recommend a folder. I'm more knowledgeable on folders so someone else may find a better choice. If they don't, this is still a very solid choice, I have never had one, but I did have an izula (which is very similar).

For folder I would go with the Ontario rat, they make this is d2 blade steel which would be better and they make a smaller version (rat 2) but any version of this knife you choose will be the best for the money.

Another fixed blade that is similar to picture is this Schrade. Schrade usually isn't the best company but 1095 is definitely a cheap, good steel. With the blade thickness and steel, I would trust this knife any day.

I have the Manix 2. I don't like the look of most Spydercos but this one I love. I use it a lot, It feels great in my hand, not too heavy, not too light, cleans pretty easy, and it seems like it is going to last a long time.

Congrats on starting the journey that is bushcraft and woodsmanship. It's such a rewarding pastime. Since you seem to be loading up on gear I have on huge piece of advise for you. I beg you BEG YOU to invest a little bit of money on a good belt knife. Nothing to fancy. Some thing like an Old Hickory butcher knife or a good quality Mora . Both are relatively inexpensive and quality products. When I started out I bought a cheap "survival knife" which wasn't worth the cardboard packaging it came in and then eventually upgraded to the Bear Grylls ultimate survival knife which promptly broke after about 3 overnights of use. Budget bushcraft is fine for most things however spending 15 dollars on a mora you will have to replace MAYBE every 3 or 4 years if you take care of it certainly beats spending 10 dollars 3 or 4 times a year on junk. Good luck and remember... in the famous words of Ray Mears "If you're in the woods and you're 'roughing it' you're doing something wrong"

LOL, i just bought BOTH of these knives like a month ago(drunk amazon shopping can be dangerous). I thought i would like the brawler better and the blade design does make it better for some stuff i do at work, but it took me all of 2 days to fall for the cryo as my preferred EDC. It feels more solid in my hand, its a bit shorter, and its thinner. The clip on it lets it sit lower in your pocket as well. As someone who is in and of their pockets a good bit the thickness is actually a big plus.

These knives were purchased to replace a Kershaw Clash that i lost and i would definitely recommend looking into that one as well if you havent already, i really liked it but just wanted to get something different.

Here is what would use for $100 USD. All prices are via Amazon/Wal-mart

Pack: OutLander Lightweight Day Pack - Cheap, Lightweight and would get the job done for a GHB ($18)

Cutting: Morakniv Companion - Cheap and Mora makes some of the best knives ($12)

Combustion: Storm Matches ($6), All-weather matches($0.75), 2 Bic Lighters($2), and some Wetfire($6)

Cover: 3 Emergency Blankets($2)

Container: Back pack listed above, 6 bottles of water ($3), Single layer stainless steel bottle($7)

Cordage: 100 Feet of 550 ($6), Duct tape ($3)

Candlelight: 2 LED Lights ($4-12)

Consumables: 6 Cliff bars ($6), 3 %-Hour Energy ($6), Bag of trail Mix ($6)

Clothing: 2 Extra Pair of socks ($2), 2 pair Gloves ($7), 2 Hats ($10)

Communication: 3 Road Flares ($6) Signaling Mirror ($3)

Cash: $40-100 is recommended but this is optional.




Everything I have there (Cash excluded) should cost around $120. You can save money by making your own Wetfire with cotton balls and petroleum jelly. And the food can probably be replaced with cheaper items. I just put stuff I am comfortable with. Same is true with the flashlights, you could grab 4 of the $1
Wal-mart lights they are great for short term use and would cut out another $8.

Buy stuff in bulk when it is available too this will cut down cost.

Something every car should already have, but it worth the extra $10-20 is a small first aid kit or 2.

The man that sharpens my knives locally, explained to me that all dish washing detergents have abrasives in them to clean your dishes better. Abrasives are bed for a keen edge. Personally I have been using
Morakniv Companions as steak knives. I chose these knives because my buddy who is a survival instructor and search and rescue personnel swears by them for anything, outdoors or indoors. The blade lasts forever and the edge on the carbon steel lasts longer than stainless because carbon steel is harder. I bought three and they are pretty amazing. They are carbon steel, so they will acquire their own amazing colors as you use them.

EDIT: Find them here: http://www.amazon.com/Morakniv-Companion-Outdoor-Military-4-1-Inch/dp/B004TNWD40/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1408767946&sr=1-1

everyone seems to rave about the griptillian and the 940 from benchmade. also includes their lifesharp service, which is pretty awesome

i have a decent number of knives, but the one i use the most by far is the delica 4 wave-- best $60 i ever spent.

in the end i'd say you could definitely spend a lot less than $200 for a great knife, just depends on your taste

Olight M2R But honestly any flashlight (preferably using an 18650 battery) will be extremely useful and I use mine many times throughout the day/night.

Keybars are also pretty useful, just bought my first one the other day and it really beats using a keychain.

Any good knife will also be useful. I personally carry a Benchmade 940 and I love it.

If you go up to $30-40 you can find a lot of great american made knives in that range like a Kershaw Skyline ($35), Salvo ($30), or Buck 110 Paperstone ($30) Classic ($35), Vantage Avid ($34)
BTW, a good pocket clip shouldn't be uncomfortable in your hand. None of the pocket knives I've owned have dug into my hand at all. The Buck is a nice option if you don't want a clip though.

Oh for sure! What's your price range?

For under 40$ some great options would be the Kershaw Leek , the Kershaw Cryo (the Cryo II is a bit larger for almost the same price if you prefer) or anything Kershaw really. You could also look for Sanrenmu knives, they're good for the price.

If you're really serious and you're looking for better quality, I recommend the Spyderco Delica (smaller), the Spyderco Endura (larger) or the Benchmade Griptilian (mini or full size, your choice). I own a mini Griptilian and I love it, I really recommend it if you can justify the price.

I had in mind this Kershaw 1605CKTST since I recently got myself a similar kershaw and I am very pleased with it.

So I kept shopping around and Buck seems decent but the blade is small at 2 1/2 inches. But that seems like it would perfect for my dad appart from the blade lenght.

Is Knifecenter.com a good place to buy. I Found a Gerber Tanto style that seems to be perfect. Opinions ?

You get used to friction folders, but I understand your concerns. If you want a locking knife if would forget about them. Making it a locking folder is a pretty extensive mod.

It's something totally different, but the Ontario Rat 2 is a pretty popular knife over here. It locks, has good steel and is pretty affordable. But it doesn't have the looks of a higonokami.

I absolutely love the leatherman wave. It is truly great. The only thing I don't like about it is now I don't have a need for any of my other knives. Also, I just purchases a sypderco tenacious here is why. It should be arriving today and I'll tell you how I like it. Another knife to consider is a buck model 110 folding hunter. If you read the reviews they will explain why.

Edit: Got my tenacious and love it. Highly recommend.

I love my small forest axe. Best survival purchase i've made. I wouldn't stray from that idea, unless you decide to refurbish an antique hatchet. I've seen people fix up sixty year old plumb scout hatchets to gransfors quality.

For knives, i use my moraknive survival and the condor bushlore. The bushlore a hardy-ass knife and it's only about thirty bucks. I use the mora regularly. That particular one is what i have, i picked it up based on the thickness of the blade, but they have far cheaper ones if you don't want to throw down that much. I believe you can get an almost identicle knife without the firesteel for around 15 bucks cheaper.
Good Review on the bushlore

Machete-wise, i love my Condor Parang. It's giant, it sharpens well, it holds an edge, and it's tough as nails. The thing is 1/4 inch thick. It's big. It also comes with a sexy leather sheath of equally high quality and durability.
I've also played around with the full size bear grylls Parang by gerber. Thing cuts like you wouldn't believe, with great weight length and balance. I use the condor, my survival bud uses the gerber. They're about equal in different ways.

I really really like a $13 Mora. Rugged, sharp as heck, solid...so cheap you don't feel bad really really using it and beating the piss out of it. A real been-there-done-that guy I know recommended them to me and after using one (and having lots of other fixed blades, I truly love it)
https://www.amazon.com/Morakniv-Companion-Outdoor-Military-4-1-Inch/dp/B004TNWD40
They make a serrated also:
https://www.amazon.com/Morakniv-Bushcraft-Serrated-4-3-Inch-Stainless/dp/B00K70MLK0/ref=sr_1_10?s=sporting-goods&ie=UTF8&qid=1509940703&sr=1-10&keywords=mora+black


If I was going to pick anything maybe one of these:
http://www.jayfisher.com/USAF_Pararescue_Knives.htm

This with an aftermarket sheath:
https://www.amazon.com/Ka-Bar-Snody-Handle-Included-Purple/dp/B00ILFNAYY


Actually what am I smoking. This: 100x this. If you've held it in your hand you know that it is the most comfortable knife I've ever held.

http://www.benchmade.com/bushcrafter-family.html

Although the Busse I'm evaluating now is pretty dope.... I still want a Benchmade Bushcrafter.

If it was for overall survival/utility I'd want a Himalayan Imports Khukuri.

For Search/Rescue specifically... give me a tanto-point, combo-edge...honking chunk of steel.
https://www.topsknives.com/knives/tactical/tops-pry-knife-ppp-tool
https://www.topsknives.com/knives/survival/smoke-jumper

Could be persuaded to try these
http://www.benchmade.com/fixed-blade-knives.html?blade_style_shape=861

something stupid and overbuilt (in the best way)
https://www.youtube.com/watch?v=Axt6pJERJ38

lol im really not a gun snob, but i love my full size mk25, in the summer or when i dont have a suit i carry a small sig p938 so i dont mind smaller guns at all. My spyderco that i just lost was a delica 4. heres the link. I loved it! I also carried a cutco folding knife that was amazing
https://www.amazon.com/Spyderco-Delica4-Lightweight-Ground-PlainEdge/dp/B003CH3V5E/ref=sr_1_1?ie=UTF8&qid=1496332376&sr=8-1&keywords=spyderco+delica+4+knife
https://www.cutco.com/products/product.jsp?item=lockback-knife#sm.0000tnlyoz18n2dx1qfcjipmxla5a

Good idea but do keep in mind that different steels respond very differently to the stone. Really cheap steel will usually be quite soft, maybe even too soft to properly sharpen without it "smearing" or rolling over.

Maybe start with flea market junk, but consider something like a $20 Kershaw Cryo as an intermediary step. Its a lot better steel and will give you good practice, but if you really booger it up and can't fix it, you're only out $20.

On the other hand, if you find you can properly maintain the edge on that Cryo you'll have no problem with just about anything else you want to try, plus you've got a really good entry-level folder as well!

Look at the Kershaw Leek, its got a good 3 inch blade, it practically disappears in your pocket, is basically a modern gentlemen's folder, and can get it in several different colors. Its one of the most popular knives out there and is well made. Only thing to watch out for is the tip, its very thin and can break off if you try and use it as a pry bar. You can find the leek for about 40-60 bucks depending on the model.

Link - Kershaw Leek

If you're looking for something heavier duty, the Kershaw Blur or Freefall would be good buys. I use a freefall as one of my EDC knives and think its a great buy for the money. The blur is very well regarded as well, though I don't have experience with one myself.

Link for Blur

Link for Freefall

If you don't absolutely need the spring assist, another idea would be a Spyderco Delica 4, or perhaps a Spyderco Persistence if you want a little cheaper price. Both are solid knives for the money and aren't too bulky in the pocket. You can get the Delica in colors too!

Link for Delica 4

Link for Persistence

No problem.

Kershaw Scallion (Small, assisted opening, steel is not so great)

Kershaw Skyline (good size, G10, nice blade shape, steel can get to a crazy level of sharpness)

Kershaw OSO Sweet (pretty cool assisted opener, great price there on amazon)

Spyderco Tenacious (same decent steel on the OSO Sweet and Byrd, good G10, good blade shape, Spyderco quality, great value)

Byrd Cara2 (Great value, overseas production brings prices way down on all Byrd knives)


Here is one above your price range

And one below your price range

It's a great knife for under $30. Strong blade, amazing grip on the handle.

Honestly Im not crazy about the fire starter as I keep plenty in my camping kit, so this will be redundant. But they didn't any Mora's available without it so I bought one anyway.

If you are looking for the fire starter/knife combo than it's great. other wise just get the basic Mora for half the price.

A knife is always a good gift. You can get a fairly nice knife for $30, or a pretty decent knife for $15. If you don't feel like shopping online, you could even pick up a Gerber Mini Paraframe for $10 at Walmart. They're really more affordable gifts than you'd think.

The best part is, they're good gifts for everyone. If they're a knife enthusiast, they'll always be glad for another knife, they can always use a cheap knife as a beater knife. If they've never carried a knife, they'll give it a try and realize how convenient it is.

I gave my girlfriend the Gerber Mini Paraframe after she kept borrowing my knife. She scoffed at first, but tossed it in her purse, a week later she thanked me, saying how often it's saved the day. 3 years later, she still carries it in her purse.

The Condor Bushlore is an inexpensive option, and weighs about 12.3oz. If you're planning on batoning wood with your knife, you'll want it thick enough to withstand the force, and long enough to be able to hit the tip-side of the spine poking out from the other side of the log. Since your budget is a lot higher than that, you might want to shop around for something higher-quality.

Check out the Blind Horse Bushcrafter or Woodsman. Not sure what they weigh, but I'd be happy to lug around the extra weight of one of those beauties.

EDIT: Also note that O1 tool steel rusts very easily. Be prepared to maintain those blades quite a bit. It's very tough, though, and decently easy to sharpen. I read somewhere that, when polled, most knifemakers would choose O1 for their personal blades. It's the same steel as in the Ray Mears Woodlore knife.

Well heres a list of some from amazon.

• Opinel No8 Carbon Pocket Knife | $12 | 4.6 Stars
  
  
• Kershaw Chill Serrated Pocket Knife | $21 | 4.8 Stars
  
  
• Kershaw Brawler Speedsafe Knife | $23 | 4.5 Stars
  
  
• Ontario RAT Folding Knife | $27 | 4.8 Stars
  
  
• Kershaw Cryo Speed Safe Folding Knife | $30 | 4.4 Stars
  
  
• Spyderco Ambitious Plain Edge Knife | $33 | 4.5 Stars
  
  
• Spyderco Tenacious Plain Edge Knife | $34 | 4.7 Stars
  
  
• Camillus Carbonitride Titanium Folding Knife | $37 | 4.8 Stars
  
  
• Kershaw Ken Onion Leek Folding Knife with Speed Safe | $39 | 4.7 Stars
  
  Hope that helps!
  
  PS if you aren't sure about your knife laws check out this PDF just scroll to your state and check. Also /r/Knives can probably help you if you have more specific questions about knives. Although going to that sub-reddit will also probably mean spending more than $30 so be forewarned.

The Condor Bushlore is another great knife in the thirty-forty dollar range. Heavier and more robust than a Mora, but still a pleasant looking, non threatening blade. The leather sheath is a nice bonus too. I love my moras, but i can't help but think of them as a little disposable.

It's tempting to go for the big knives, but in my experience, unless I actually needed the extra chopping power specifically from my knife (for instance, because I couldn't spare the weight or room for a good hatchet or folding saw) big knives just weren't worth the extra weight and bulk because they're a lot harder to use for making feather sticks or any fine work that involved small cuts and even the best big knives don't chop as well as a mediocre hatchet. Case in point: Here's a picture of a log after 10 chops with the tiny (1.2lb) Gerber Bear Grylls Survival Hatchet ($35) and the Ontario RTAK II (~$100) which is supposed to be one of THE BEST chopping knives available.

Even when I traded up from the RAT-5 (which was already a big, bulky knife, to the Becker BK7, I used my Mora a LOT more often than the big knife. Now that I have the ESEE 4, I rarely ever touch the Mora anymore.

That being said, some people genuinely do benefit from the big knives but you're not going to know that until you get some experience. If I were to start over I'd probably get a Condor Bushlore, use the crap out of it, learn how to sharpen it and build the experience to know what kind of knife I actually need.

If you like kershaw you can get a blur with S30v steel for around 65$ on amazon if you still want a kershaw. I've never been too impresed with them since I find their build quality to be lacking. They seem to have an excessive amount of blade play and use average quality steels in most of their knives. The a premium steel that can hold a razor sharp working edge. The spyderco delica/endura line is also a great knife. They have full flat ground blades that come razor sharp from the factory with absolutlely no blade play. I personally carry a green delica as one of my edc knives. The dragonfly is also great if you want a knife that dissapears on your person. it is a featherweight knife, that cuts and handles like a much larger knife.

If you are looking for a knife that can take an absolutely harsh beating, I would have to reccomend an Ontario RAT 1 or 2 depending on you size preference. They are a bit heavy in hand compared to other knives it size, but perform just as good as any of my spydercos. It is also on the cheaper side at around 25$.

The benchmades are also a good choice, but I would also reccomend the benchmade mini-presidio.

Anyways, I thought I might as well just post some links to them:

S30v Kershaw Blur

Benchmade Mini Presidio

[Benchmade Griptillian] (http://www.amazon.com/dp/B000Q9BOF0/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=2Q6YQ3PL1NNYW&coliid=I1IO3PSF8569TW)

Benchmade Mini Griptillian (I prefer thumb hole openers, but both griptillians also are offered with combo edges and thumb studs.)

Spyderco Dragonfly

Spyderco Delica

Spyderco Endura

Ontario RAT 1

Ontario RAT 2

You should pick up a few high value knives for the money. Here are a few that are worth way more than their price tag:

Mora Companion - this blade is incredibly useful for camp tasks and bushcraft projects, very strong even though it's not full tang (I've never heard of one breaking).

Ontario RAT Model 1 - This is one of the best folders I've used, at any price. For $26 you won't find a better knife.

Utilitac 2 - This knife comes in a ton of different styles, made by Ontario like the RAT, and of equally high quality. These knives are built like tanks, and can take abuse.

Schrade SCHF9 - Unlike the Mora, this knife is a huge chunk of steel. I doubt you could break it with a hammer to be honest, so if you're tastes run towards the bigger camp knife, this is it.

This Guy did - Who knows what would have happened if the knife snapped in half

Granted that is very low probability, but you still might need to rely on your knife to save your life. Even if you never need it, an extra $80 to save your life seems like a good deal for me. And thats ignoring the fact you can get a nice Kershaw for around $30

So honestly, I don't see the point in getting the Sanrenmu...

You might consider the Condor Bushlore, especially if he's just getting into bushcraft, or even at an intermediate level. http://www.amazon.com/Condor-Bushlore-4-375-Inch-Walnut-Leather/dp/B002CC6BPM

Edit: I also agree that the Mora Classic is excellent and at the right price point, but I think the Condor Bushlore is also an excellent value and is in a few ways a step-up from the Mora. Its full tang, larger, and has an excellent leather sheath.

Microstream The clip on mine is different but I think this is the same light. Love it.

Spyderco Tenacious Easily the highest value knife I've ever had/seen. I cut and pry the shit out of stuff with this knife on a daily basis.

I decided to go with the Spyderco Manix 2 G-10 ... but I'm not buying it yet. I'm hoping to get it as a gift, so I'm keeping it on my Amazon wish list :)

I would second the Delica recommendation. Amazon has a Delica 4 ffg in Purple that would do nicely. The Dragonfly 2 in a very dark green frn and a yellow H1 salt frn would be great as well. Great gift idea man!

Sorry guys, I thought this comment would show up but it didn't so here's it again!

Info and such.

Picture one is my work (garrison, not deployed) EDC and picture two is my normal EDC.

1. IPhone 5 with LifeProof case
   
   
   
2. [Fisher Space Pen] (http://www.amazon.com/gp/product/B001E103CY/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=1944687602&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B000095K9D&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1RKGZQWYCXZQTRK0TSEH) (This is my third one, last two flew off.)
   
   
3. Just a normal sharpie
   
   
4. Two diffrent types of Rite in the Rain
   notebooks
   
   
5. Gerber Flick Multi-tool and belt carrying case
   
   
6. Southord Jackknife lock-pick set
   
   
7. Kershaw Cryo knife
   
   
8. CREE LED flashlight
   
   
9. Keys with a TEC P-7, a tritium key FOB, and a 2 GB flash drive
   
   
10. ID tags
    
    
11. A very cheap Armitron sports watch
    
    
12. Carmex
    
    
13. A BIC lighter
    
    
14. Standard ear Protection
    
    
15. Standard tri-fold wallet (will upgrade soon)
    
    
16. Oakley Flak Jacket (These were given to me)
    
    
17. Standard issue gloves (do not buy these)
    
    So I do carry much more stuff with me while I'm working but I'm quick to shed it when I get back to the barracks.
    
    Hope you enjoyed and I'll be happy to answer any questions about my getup!

They're both in 8cr13mov and people really underestimate them for it. It's actually a very easily maintained steel but watch out for the Clash and its bead blasted finish; it'll rust on you easily. The Freefall is stonewashed so you won't have that problem.

Honestly I'd probably prefer a [kershaw chill](http://www.amazon.ca/Kershaw-3410-Chill-Pocket-Knife/dp/B002IVHQ5Q/ref=sr_1_1?ie=UTF8&qid=1398139713&sr=8-1&keywords=kershaw+chill] in that range for its blade geometry. It's mostly flat ground and it will make for noticeably better slicing capability. (even though it is also bead blasted)

Otherwise it'd be good to pony up ten more bucks and get a Rat II

Day Packs are abundant. There are dozens that fit the 'hydro port' requirement. It really depends on what other features you need. Most specifically - size. You say 'day pack' slash 'one night pack'. In my experience those are 2 very different bags. A day pack is generally 15-30 liters, depending on how much technical gear you plan to carry (or how cold / snowy it gets). An overnight pack is generally 50-65 liters. I warn against picking an overnight pack based on the number of nights you'll be out. 1 night requires the exact same gear as 10 nights, other than food (which is generally 1 liter per person per day). So if you want a day pack, focus on that. If you want a overnight pack, focus on that. Trying to get 1 that does both jobs well will end up awkward both ways.

• Day: https://www.osprey.com/us/en/product/talon-22-TALON22_669.html
  
• Overnight: https://www.osprey.com/us/en/product/atmos-ag-50-ATMOS50S18_334.html
  
  ​
  
  Mora is a classic fixed blade bushcraft knife. Quality and cheap. $14
  
  
• https://www.amazon.com/Morakniv-Companion-Outdoor-4-1-Inch-Military/dp/B004TNWD40
  
  ​
  
  Sleeping Bags are another BIG category. The most important factor is temp rating. What low temp do you plan to sleep in? 20F is what I normally recommend for the vast majority of campers. It will keep you comfortable down to freezing temps, which is when most people stop going out. You can open it up for warmer weather. If you'll only be out in summer conditions - a 40F bag is even better (cheaper, lighter, smaller). A quilt is another option compared to a traditional mummy bag. Once I went to a quilt for 3-season trips I never went back. Make sure you have a good sleeping pad too, you need insulation under your body.
  
  
• https://enlightenedequipment.com/revelation-quilts/
  
  This deal was posted yesterday, a steal at $90: https://www.campsaver.com/kelty-cosmic-20-sleeping-bag-600-dridown.html
  
  ​
  
  Life Vests from NRS are quality. I like mine.
  
  They also make a knife that attaches to the PFD. Mine is perfect.
  
  
• https://www.nrs.com/category/2547/life-jackets/
  
• https://www.nrs.com/category/2726/whitewater-kayaking/knives-tools

How about a pocket knife? They have the benefit of being both cool and extremely useful. You can get yourself a Spyderco Manix 2 on Amazon for just under a hundred bucks with free shipping. It's a good size for a lot of tasks, but small enough that it can easily be carried in your pocket. An excellent EDC blade for the price.

re: thumbstuds. That is where I give cold steel a nod, they make theirs removable, so when putting on a clamp style sharpener you can remove them so they do not get in the way.

But I agree with all this. Honestly, as well a great EDC blade for a low price in your budget that will serve you well, is an Ontario Rat II. They can be had for about $30 - $40 and are amazing budget blades. They are not assisted, but the deployment with the thumbstud are amazing. Well worth a try to purchase one.
http://www.amazon.com/Ontario-Knives-Model-Folding-Knife/dp/B00BBPAOCW

> You sound like you think this is my first knife I have other knives and I like this one also. I don't think I got ripped off. lol it was only 20 bucks and for 20 it is a pretty sturdy well made knife.

-OP

>I've cut down 2 small trees with this knife and went through a whole winter chopping ice from my gutters and shutters. For $20 you will not find as heavy duty a blade as this.

-Comment on this thread

There are several other 20$ knives that are ridiculously great values. And some of them are folders too, meaning the lock mechanism must be constructed right, or they can hurt the user.

Ka Bar Dozier

Byrd Cara Cara 2

If 20$ can give you a well-constructed folder that won't fail on you, 20$ can get you a nice fixed blade with a good heat treat.

Sure it may not have the same edge retention as a Becker or Izula because of the steel used, but keep in mind fixed blades are typically used with more force than folders are. Batoning, chopping off branches, etc, are more reliant on the user's force than the actual sharpness of the blade.

...And it's still a fixed blade. A piece of steel with handles attached. Unlike folders, there's no mechanical parts to fail. This makes it a very strong design in general. Even though it won't have the same fit and finish as a Becker, it will still have more durability than any folder. But you shouldn't be running these things over with 18-wheelers. It's way more than adequate, if you know to respect the thing.

A full tang fixed blade for 20$ is a steal.

If you want something that's high quality and will last forever, a great option is a Benchmade Saddle Mountain Skinner The S30V steel is uses is great for keeping an edge of a long time, and it's backed by a lifetime warranty. It's also made in the US, which is always nice.

Another great option for very tough, no-frills knives is a Swedish company known as Fallkniven. They make fantastic hunting and survival knives. Their A1 model is their most well-known, but I prefer the smaller F1 series It's a fair bit lighter and easier to carry.

Here are my personal essentials.

• Spyderco Delica 4: $60 VG-10 steel, comes in tons of colors
  
• Spyderco Endura 4: Larger version of Delica
  
• Morakniv Companion: $12-$20 A really awesome fixed blade, outperforms knives triple it's price.
  
• Victorinox Tinker: $20-25 classic swiss army knife, really great quality in general. Lots of tools but not too many so it's easily pocket carried.
  
• Victorinox Cadet: Smaller Swiss Army Knife, aluminum handles. Lots of colors.
  
• Kershaw Cryo, or Cryo 2: $20-40 steel frame lock, Hinderer design, good price, tons of colors. The Cryo 2 is the same as the Cryo just larger.
  
• Ontaro Rat 1 or 2: $25-30 Classically shaped folders with a very rugged build for a liner lock. The 2 is a smaller version of the 1.
  
  Also, you're going to want a sharpening system that works for you in the long run. I personally use the Spyderco Sharpmaker But there are tons of good sharpening options out there.
  
  P.S: You're going to get a lot of people hating on your Gerbers most likely, that's because they're honestly not worth it in the long run. They use very low quality steel for the price and they don't have the best quality control. I'm not saying your Gerbers are trash or anything. But they definitely won't last very long. Just about all of the knives I listed will last you a lifetime if you treat them right, and oil/sharpen them correctly.

I have a Kellam, Helle is going to be my next puuko addition.

Pretty knife! I've found myself admiring my Kellam more often than using it.

Just as a tip, this knife has lasted me amazingly in the outdoors (I mainly do a lot of fishing and camping) and complements my wood-handled Kellam rather nicely for wet environments! Anyways, great gift.

I really like my Kershaw Cryo. Very inexpensive (<$25 online) and a great size for EDC. The blade is easy to maintain and came from the factory with an excellent edge on it.

http://www.amazon.com/Kershaw-1555TI-SpeedSafe-Folding-Knife/dp/B0074FI28Q/ref=sr_1_1?ie=UTF8&qid=1417308519&sr=8-1&keywords=kershaw+cryo

It also has an adjustable pocket clip and speed-safe assisted opening which is a nice feature in a relatively inexpensive knife.

I'm in IT as well and perform very similar tasks. I use the Spyderco Tenacious for everything. It's easy as hell to sharpen and the flat ground blade takes a wicked sharp edge. It has stainless steel liners, but they're skeletonized so the knife is still pretty light. The G-10 is nicer than the stuff I've got on knives that are well past the hundred dollar price point.

As for draw speed, you can do a bootleg wave using zipties. Here's mine. Best $30 I've ever spent.

https://www.amazon.com/gp/aw/d/B002CC6BPM/ref=pd_aw_lpo_200_tr_img_2?ie=UTF8&psc=1&refRID=GR55ZR4H7T6DHD4B2NBN
Love this knife, great craftsmanship and just feels nice. Totally worth the 55$. Just keep the blade clean and wipe off any debris (it's best to oil it).

here's the holy trinity I suggest to everyone with this question. Cheapest: https://www.amazon.com/Wesson-SWHRT9B-Outdoor-Tactical-Survival/dp/B07THMKS3B Best for a "weapon": https://www.amazon.com/KA-BAR-Marine-Corps-Fighting-Straight/dp/B07KFNLPDZ/ref=pd_sbs_200_1/134-8730811-3738123?_encoding=UTF8&pd_rd_i=B07KFNLPDZ&pd_rd_r=2462612e-cbab-4572-becc-1bc13e89858f&pd_rd_w=zo5L0&pd_rd_wg=TY5xV&pf_rd_p=43281256-7633-49c8-b909-7ffd7d8cb21e&pf_rd_r=97ZT1BGE29JARD4RPTVF&refRID=97ZT1BGE29JARD4RPTVF Nicest looking and best for a dedicated tool: https://www.amazon.com/Knives-Special-Fixed-Leather-Sheath/dp/B000EHWWJQ/ref=wsdps_2?cv_ct_pg=detail&cv_ct_wn=woodstock-detail&linkCode=oad&cv_ct_id=ws&pf_rd_r=TD6J7MD9SFQE37WW9D7T&pd_rd_wg=AuCCX&pd_rd_w=axkeg&pd_rd_r=a9447115-06e9-4e31-92a6-522146ba1a51&th=1

For a cheap brilliant bushcraft knife:

http://www.amazon.com/Morakniv-Bushcraft-Tactical-4-3-Inch-Plastic/dp/B009O01H0Y/ref=sr_1_1?ie=UTF8&qid=1422126084&sr=8-1&keywords=mora+bushcraft

For a cheap brilliant bushcraft knife in wet conditions:

http://www.amazon.com/Morakniv-Bushcraft-Sandvik-Stainless-4-3-Inch/dp/B00B90H1T8/ref=sr_1_4?ie=UTF8&qid=1422126084&sr=8-4&keywords=mora+bushcraft


For a very cheap good bushcraft knife:

http://www.amazon.com/Morakniv-Companion-Outdoor-Military-4-1-Inch/dp/B004TNWD40/ref=sr_1_1?ie=UTF8&qid=1422126275&sr=8-1&keywords=mora

For a very cheap good bushcraft knife in wet conditions:

http://www.amazon.com/Morakniv-Companion-Outdoor-Stainless-4-1-Inch/dp/B005EOJAKI/ref=sr_1_3?ie=UTF8&qid=1422126315&sr=8-3&keywords=mora+orange

Edit: Just realized your looking for an EDC Knife. To split kindling? My post revolves around your first knife to go out into the bush. An EDC knife should just a small folder for when you open those fancy amazon boxes. Don't need a fixed blade knife for EDC purposes, but if your gonna be out in the woods messing around I'd follow what I said.

------------------------------------------------------------------------------------------------------------------

​

IMO a Mora companion should be your first knife. They are 10 bucks. The one linked is a carbon steel version, if you are gonna be around water a lot get the stainless steel version. The stainless steel version will rust dull quicker. Edit: Was a typo, it definitely wont rust quicker lol. Get it if you are around water because it WONT rust, but the edge will dull quicker, this is why knowing how to sharpen in the field is important. I mean you can get through a day with a dull knife, but it's never fun.

This won't be the best knife in the world, but it's the best beginners knife, it can do all the basic tasks and work well for $10, so if you smack a rock, chip it somehow or end up messing it up when sharpening you can buy another one. Practice sharpening! This is a big one, you don't want to get a $100 knife and mess up sharpening it - anything is fixable but you don't want to do that with an expensive knife and start taking off too much steel and what not.

I'd recommend a Mora companion, and whatever sharpening method you want. A decent, cheap stone is the Fallkniven DC3. There are better stones - but they require oils (or water) and you have to go through two or three types of stones and all these other things. Not to mention they are heavy and bulky. DC3 is small and you can take it with you.

If someone else wants to go more indepth on other sharpening methods and stones, please do so, I've had the same ones for a few decades and am not up-to-date on the tech.

Also strops, I had a local leatherworking shop make one for me, I've never found good ones online, or good leather to make your own. If you are familiar with good ones, feel free to link them.

Get a Leatherman multi-tool for EDC (Wave is the best all around but the Wingman is a solid alternative if you find the Wave to be too large) and a heavy duty outdoors knife that can be used to baton wood (like the Mod 4 or RAT-5). Get a solid hunk of steel and make sure it's full tang.

Personally I would go with something like a Buck hunting knife . They are a nice compromise between the smaller knives and excessivley heavy bowies.

If you're looking for a plain and simple, fixed-blade knife, get a Mora. They're cheap as shit, razor sharp, and hold up damn well. Just keep them clean and oiled or they tend to rust.

If you're looking for a multi-tool type knife, go with Leatherman. They're more expensive, and the model I have is discontinued so I can't give you a recommendation, but they've got a version for everyone.

And listen to everyone telling you not to use a knife for self defense. The best tools for self defense are open eyes and fast feet. If you feel like you need something else, there are much better options than a knife.

i like this citizen as a nice but not crazy expensive watch. it's my normal wear watch

griptillian from benchmade is my favorite EDC if you can afford one (not crazy expensive, and you will love it)

inexpensive carry knife i like this kershaw

The Morakniv Companion seems like a good starting point. Pretty cheap where I'm at ordering from Amazon.

Granted, I have a couple Gerbers. Mostly paraframe folders, and for the price, you're better off with a Chinese Kershaw, like the Oso Sweet

For general survival/bushcraft purposes (though not for breaking a car window):
https://www.amazon.com/gp/aw/d/B004TNWD40/ref=mp_s_a_1_1?ie=UTF8&qid=1485034514&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=morakniv&dpPl=1&dpID=31hduVz10IL&ref=plSrch
(Great quality/price ratio from Sweden)

For EDC/general cutting purposes(and gorgeous old-school looks), a small high-quality folding knife from France:
https://www.amazon.com/gp/aw/d/B004AMY6GS/ref=mp_s_a_1_2?ie=UTF8&qid=1485034837&sr=8-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=opinel+carbon&dpPl=1&dpID=51baQV0eVVL&ref=plSrch

If you want a more "modern" pocket knife that is still affordable, I recommend something from the American masters of Cold Steel like:
https://www.amazon.com/gp/aw/d/B00U1I875Q/ref=cm_cr_arp_mb_bdcrb_top?ie=UTF8
(Gotta give some lovin' to that Aus8A japanese steel and the Scandinavian grind)

I can recommend all three, though I own only the first 2. Have fun and stay sharp!

Spyderco has a wide range of folders under $100. There's the Delica, Endura, Dragonfly, Centofante 3, and Stretch to name a few. All high quality, made in the USA.

The Tenacious line (including the Persistence and Ambitious) is awesome if you want good quality for less than $40. However, if you want to spend more, I would definitely recommend US made knives.

another killer set of scales.

Can I make a suggestion? I read below you are using the Sarge kits - which run about 18 bucks. While the scales are awesome, the knife itself - well, it's not good. Garbage pivot, tip down, non-reversible pocket clip, 440C (gross) and an "ambidextrous" thumb stud which doesn't matter because it sould only be carried in the right pocket anyway.

For not a lot more, you can scale a really nice knife. The RAT II is very highly praised and recognized in the knife community and even though it comes with scales already, it's super easy to make scales for

https://www.amazon.com/Ontario-Knife-Sp-Black-Folding-7Inches/dp/B00BBPAOCW

I own one of these and it's a pretty good knife for EDC. One handed open & close, nice fit in the hand. Only potential drawback would be performance if it gets wet, which i haven't had to worry about yet.

I'll second the Mora blades. I have a couple like http://www.amazon.com/New-Swedish-Mil-Mora-Knife/dp/B004TNWD40 this one. If you poke around, you should find different colors in the $12-15 range. Very good steel on that blade - used it to field dress a couple deer and was still sharp.

Since space may be at a premium - many butcher shops in grocery stores will sharpen non-serrated blades for free.

I'd skip the flashlight and get a headlamp. The simpler ones without the battery pack on the back side of the head work nicely and double as a hand held light if you need it too.

I typically stick to benchmade but theyre normally $150+. gerber is a good brand, but if your state allows assisted opening you should go for a Kershaw. I carry a Clash and use it almost every day. Its got a flipper with a torsion bar assist, so be careful of state laws. Its a little heavy, but I like that, feels more solid to me. Excellent knife for the price. my other, more expensive knives that I rotate (or will be, in a few days when some of them get delivered) are the Benchmade Griptilian, the Benchmade North Fork and the Benchmade Barrage(assisted opener).

If you're looking for a cheap, rough work knife, get the Kershaw, but if you're looking for an investment and a really high end, go for a BM.

Quality tools cost a bit more. It will last longer, and give you better service.

Spyderco makes several good EDC choices IMHO. Look at a Tenacious or a Delica to start.

SOG also makes quality knives. I'm partial to the Flash II Tanto, but it comes in several blade styles.

Either way, make sure you get a good sharpening system and learn to keep your knife sharp.

A sharp knife is a safe knife

Kershaw skyline
http://www.amazon.com/Kershaw-Skyline-Knife-Textured-Handle/dp/B001CZBDF8/ref=sr_1_1?ie=UTF8&qid=1411072014&sr=8-1&keywords=kershaw+skyline

Kershaw chill
http://www.amazon.com/Kershaw-3410-Chill-Pocket-Knife/dp/B002IVHQ5Q/ref=sr_1_2?ie=UTF8&qid=1411072014&sr=8-2&keywords=kershaw+skyline

Both are great edc knives. Chill is small but tough (not tiny though) perfect if you work in an office.
Skyline is a great overall. My work edc.

Buy 2 of either one, if you manage to break one you have a backup while the factory fixes the other.

Ok so I looked a bit and for your budget they have quite a few knifes that fit the bill.
This is the one has great reviews and I personally love the design.
http://www.amazon.com/gp/aw/d/B0033H7VI6/ref=mp_s_a_1_1?qid=1397075251&sr=8-1&pi=SX200_QL40
What do you think?

*EDIT- here's a review with some field testing. For this price point it does work http://m.youtube.com/watch?v=Z9EQk4vO94s

In that price range, from lowest to highest price, I found these in a quick search on Amazon:

• Spyderco Ambitious - 2.25" blade, $26.20
  
• Spyderco Tenacious - 3-3/8" blade, $30.13
  
• Spyderco Persistence - 2.75" blade, $31.89
  
• Spyderco Resilience - 4.25" blade, $42.87
  
  All of these use pretty much identical materials, and have identical features and quality. So go with whichever you like best.
  
  The steel used on these is middle of the road (the same as used in your Tremor), but overall quality is outstanding for the price. All around these will outperform and feel nicer than any Kershaws in the same price class, though I have nothing against Kershaw's better knives.

I would also recommend a Schrade SCHF9 or another in the Schrade series. They make some great quality knives for great prices. I said I would prefer the SCHF9 because I own it and I like it a lot, but I would also recommend looking at some other Schrades. The SCHF9 is not stainless steel so there's a little more upkeep than one that isn't, but mostly just keeping it dry and clean. Here it is: http://www.amazon.com/gp/product/B0033H7VI6/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1

For that price range? This
http://www.amazon.com/Spyderco-Tenacious-Handle-Folding-Plain/dp/B001EI7578/ref=sr_1_1?ie=UTF8&qid=1325149331&sr=8-1
Spyderco Tenacious. 3.375in blade, 8cr13mov steel (chinese aus8, a good value steel) liner lock (easy one hand closing) thumb hole for one hand opening, movable pocket clip for all 4 carry options (lefty righty tip up tip down) (need a torx screwdriver-> go to ACE) G10 handle (good shit. They line nuclear reactor cores with it.) BEST Bang for your buck

Previously mentioned Kershaw Skyline is a good one, but another one I like is Kershaw Chill. Cheaper steel, but I prefer the look.

Kershaw in general is pretty good for cheap folders.

The Kershaw Leek is a good option. And you cant go wrong with the Delica 4 I got the purple one. Everyone on here says great things about the Mini Griptillian which I dont own but probally will at some point. Also you can never go wrong with something from Case, I have the [Trapperlock](https://www.amazon.com/s/ref=nb_sb_noss_2?url=search-alias%3Daps&field-keywords=trapperlock in amber bone and I hear great things about the Copperlock.

I understand where you're coming from as far as syle is concerned, but I think giving them something they can carry everyday is more meaningful. I suggest a Kershaw Cryo;
I think the 8Cr13MoV steel is the best steel you can get in a knife under $30. I always suggest either a Kershaw or a Spyderco as a budget knife.

My comment was written with most everyday people in mind. They're mostly sharpening bad 440C kitchen knives and don't want to spend a lot of money. Another big thing is that your average person in the kitchen doesn't even know just how sharp a knife can get. The average guy is usually okay with a good working edge. I was recommending the honing rod and the Lansky system because they're inexpensive, easy-to-use, and they last a long time. Plus, most people are never even going to need a Lansky. That's already more advanced than most want to get.

If you have good knives though, everything changes. If you're a knife guy, then yeah absolutely you need to have a more sophisticated sharpening system.

We're both knife guys, so you'll probably agree that it all really depends on which knife you're using.

There are so many factors that go into it.

How thick is the knife?
What's the blade length/shape?
What's the steel?
What's the grind? Convex? Hollow? Full-Flat Grind? Scandi? Sabre?
What's the angle on that grind?
What type of knife is this?
What kind of edge do I want to put on it?

I personally just put a convex edge on most of my knives, so all I really use is a strop and a handful of compounds. For everything else I just use an Apex Edge Pro.

the 940-2 is the model that you have, with the s30v stainless, g10 scales, and green spacers. theres also the 940-1 which has s90v stainless, carbon fiber scales, and blue back spacers. as well as the classic straight up 940 which has s30v stainless and aluminum scales.

theres also the 940-1601 , the 940-1701 .. many variants of the 940 design available. same knife, different materials.

i have the same one you do, the 940-2, and i think its awesome. easily my favorite folder

Mora Companion. The value on these knives is pretty nuts, I keep thinking that prices will eventually go up because you get so much blade for the money. Great carver and slicer due to the scandi edge, and the carbon steel blade it tough and can take light batoning without issue.

Watch a few reviews online, pretty much all raving, and for good reason.

Here's a few of my favorite budget knives. Can't go wrong with any of them! I don't have any to trade otherwise I gladly would. Here's some amazon links, all prices include free shipping (and Amazon is the best.)

Spyderco Tenacious($40): http://www.amazon.com/gp/aw/d/B001EI7578/ref=mp_s_a_1_sc_1?qid=1408631106&sr=8-1-spell&pi=AC_SX110_SY165_QL70

Ontario RAT Model 1($27): http://www.amazon.com/gp/aw/d/B0013ASG3E/ref=mp_s_a_1_1?qid=1408631239&sr=8-1&pi=SY200_QL40

Kershaw Thermite($25): http://www.amazon.com/gp/aw/d/B00BNPUX94/ref=mp_s_a_1_1?qid=1408631306&sr=8-1&pi=SX200_QL40

Kershaw Cryo($25): http://www.amazon.com/gp/aw/d/B0074FI28Q/ref=mp_s_a_1_fkmr0_1?qid=1408631380&sr=8-1-fkmr0&pi=AC_SX110_SY165_QL70

Well let's not be rash.

If you really can only afford one, it has to hold up. Maybe the fixed blade is already assumed, and it's just a question of comfortable discrete carry.

You could modify a sheath to be an inside-the-waistband, deep-carry type. So long as it was comfortable and safe you'd have it all.

If that won't work than a tough cheap folder is what you want. Maybe an ontario rat?

https://www.amazon.com/dp/B00BBPAOCW/ref=sxts_kp_bs_tr_lp_1?pf_rd_m=ATVPDKIKX0DER&pf_rd_p=8778bc68-27e7-403f-8460-de48b6e788fb&pd_rd_wg=U8F34&pf_rd_r=RRBAWVQRCT0XYRE36GY0&pf_rd_s=desktop-sx-top-slot&pf_rd_t=301&pd_rd_i=B00BBPAOCW&pd_rd_w=ZFSOc&pf_rd_i=ontario+rat&pd_rd_r=6e2b1603-7384-4fb7-a8b2-3cb005087db4&ie=UTF8&qid=1539130155&sr=1

/r/knives is a great place to ask this kind of stuff.

http://www.amazon.com/Spyderco-Tenacious-Handle-Folding-Plain/dp/B001EI7578/ref=sr_1_1?ie=UTF8&qid=1425256528&sr=8-1&keywords=spyderco+tenacious

This is a great knife that I EDC and its only $35. Perfect starting knife.

Get a pair of Mora Companions for $14 each and if you find out that you want something more then you can look for something more focused for your type of outdoors use. Most "survival" knives are lumped together in one category that makes it difficult to distinguish what their type design is for. KaBar Becker BK2 is basically a sharpened pry-bar. The thing is practically bomb-proof but its thick blade and obtuse grind means that it won't be very easy to cut with. Esee knives are also tough, and feature more functional grinds and and a great warranty, but 1095 steel they use is still going to be inferior in edge retention and edge stability to premium CPM-3v or Vanadis 4-Extra that you see on stuff like a GSO-4.7 or the ZT-0180. Then you have knives like Falknivens that use high-end stainless laminated steels which are price because the process for laminating is expensive and complicated and provides a stainless blade with some of the impact absorption that normally is attributed to carbon blades while still maintaining a harder edge. The reason I suggest a Mora is that for someone new to the fixed blade game, it's an option that won't break the bank and is also probably the highest value for the price of any fixed blade available. It's the Timex of knives. Not fancy but it works and is easy to replace if you lose or break(which is still pretty unlikely) it.

http://www.amazon.com/Morakniv-Companion-Outdoor-Military-4-1-Inch/dp/B004TNWD40/ref=pd_sim_468_1?ie=UTF8&dpID=31RSOV7Bn4L&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=0QT33JYXQS3ZD772EAFD

The Tenacious looks good for the price.

So now I'm down to 3 I would like to choose from,

• Kershaw Cyro
  
  
• Kershaw Leek
  
  
• and the Spyderco Tenacious
  
  So I think I might be leaning towards the Leek, except for what you said about the thin steel. Will that be a major issue? The Tenacious looks good, only thing is that it doesn't have to spring loaded opening, which is something I didn't really know I wanted until now. Then there's the Cyro, which has a slightly smaller blade (1/4 of an inch shorter), but it also has the spring loaded system, only thing is it doesn't look as simplistic as the Leek, but I think I can get over that. Which would you recommend of the Cyro and the Leek which I've posted? Because I realize there are different variations of each knife, but if I get either, I will be getting the ones I've linked to. Thanks.

I've lurked here for a while and thought I should make my first post.

I'm also looking for a better wallet similar to mine. I've checked out the Hitch and Timber Card Caddy, but can't justify the price. Any recommendations?

Any other feedback is also welcome :)

Small multi-tools (Pick one and goes in wallet front pocket)

• Vicrorinox classic SD
  
• Leatherman Style PS
  
  Flashlight (Goes in wallet's front pocket)
  
  
• Glaree Key-chain Flashlight
  
  Pens (Pick one)
  
  
• Pilot Metropolitan Fountain Pen
  
  
• Zebra F-301 Compact
  
  Wallet
  
  
• Cheap wallet from amazon that holds my flashlight and multitool
  
  Watch
  
  
• LG Watch Urbane
  
  Earbuds
  
  
• Symphonized NRG 2.0 Earbuds
  
  Phone (Had to Badly Photoshop it into the pic)
  
  
• Moto X Pure Edition with wood back and blue accents and a Poetic Affinity case
  
  On key-chain
  
  
• Chinese Suspension Clip with organizer
  
• Nite-Ize DoohicKey
  
• Sandisk Ultra Flair 64GB
  
• Truck/House keys
  
  Knives (Just my favorites. I usually just carry whatever knife I'm feeling that day)
  
  
• Ganzo/Firebird F7542
  
  
• CRKT Swindle
  
  
• Ontario RAT II
  
  
  
  Edit: not sure why photo uploaded with potato quality
  
  

• Coast HP1 Great flashlight for the price
  
  
• Kershaw 1990 Brawler
  
  
• Timex Men's T2P390 A watch that will look good in any social event and that would be great for anything else.
  
  $94.67

If you want to spend less than $50: Ontario RAT II Currently $26 on Amazon.

If you want to spend less than $100: Spyderco Delica 4 Currently $65 on Amazon.

They are the kings of their respective price ranges. The Delica steel is a definite upgrade from the RAT II, and the knife is much lighter and easier to carry.

They are both stunningly good knives for the money.

I have two recommendations that have never failed me within that price range and bring a lot to the table for the price:

The Delica4 by Spyderco which is large and stays sharp. It can cut and cut and just won't stop. I use this for my outdoor activities where a pocket knife can be used with some abuse. Also has a great grip on it which comes in a multitude of colors. Only knife better by them in my opinion is the paramilitary 2 for about $100 more.
http://www.amazon.com/gp/aw/d/B003CHANLO/ref=mp_s_a_1_1?qid=1407121452&sr=8-1&pi=SX200_QL40

The Ken Onion designed Leek by Kershaw is my gentleman's knife. Very sharp straight out of the box and won't fail you. Much smaller than the Delica4 by equally as trustworthy. Super fast deploy speed and fits in the pocket nicely with or without the clip. Kershaw is known for cheaply priced big bang for your buck knives that just keep on going...and if you lose it, your wallet doesn't feel it. First folder I bought a few years ago and it is still my go-to most days.
http://www.amazon.com/gp/aw/d/B0009VC9Y0/ref=mp_s_a_1_2?qid=1407121786&sr=8-2&pi=SY200_QL40

My personal EDC. I love this knife, and it's held up perfectly for several years now

Edit: downvoted for sharing my EDC? Never change, reddit

Kershaw Skyline is pretty nice if you want a g-10 handle and it's US made but it is 3 1/8" long

Kershaw Cryo is pretty nice and it's 2 3/4" long

i have a BK2. It is insanely stout and thick. Quite heavy. Can be used as a pry bar. Butt could be used for smashing rocks. It will probably outlast me. I decided to mount it in my vehicle because it is too heavy to carry comfortably for long periods of time. But will be very handy for all sorts of hard tasks when I need it. It can chop wood and do pretty much anything you want it to. But it is more of a "jack of all trades, master of none." there are other knives that specialize in certain tasks and will perform better. For a dedicated wood chopper, it is a little bit too short. It is heavy enough but the weight is balanced towards the center of the full tang, not where it hits wood. It can do it. But a longer Becker would be a better chopper. I don't recall the model numbers but Becker has a lot of options. Also I cant speak to rust issues. Its very dry here.

​

I also have a SCHF9 which is a bit longer, with better shape and weight distribution for chopping. It is a cheap knife, yet very solid. Thickness is very close to the BK2. If it rusts or gets lost I would just buy a new one. The sheath is not great but there are options out there.

https://www.amazon.com/Schrade-SCHF9-Stainless-Survival-Everyday/dp/B0033H7VI6

Why not a Spyderco Tenacious?

Granted, it is about twice as heavy as the KISS, but with the weight you get G10 scales, a practical blade (Chisel grind tantos are made for stabbing people, they're profoundly "meh" for utility), and Spyderco quality. I've heard good things about CRKT, but you mind as well spend the extra couple bucks for a much better knife (IMO).

The knives I always recommend under $100:

• Ontario RAT II (~$30)
  
• Benchmade 556 Mini Griptilian (~$90)
  
  I own both and actually carry the Ontario RAT II more often just because it's a cheap-ish knife I feel comfortable abusing. The Benchmade is extremely high quality and super fun to play with.

I really like Mora. They make the Companion which is a really great fixed blade knife for only $15. Hands down the best knife for camping for the price. https://www.amazon.com/Morakniv-Companion-Outdoor-Military-4-1-Inch/dp/B004TNWD40/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1505417935&sr=1-2-catcorr&keywords=morakniv

I have that same clone and it definitely is pretty solid. But, my contender for best $20 (give or take 3 bucks) knife is still the Rat 2

I'll give you some options here instead of just one choice.

This CRKT is a wonderful tool.

If you'd like another Spyderco you can't go wrong with a Dragonfly or a Centofante III.

If you've never got a Kershaw they're killer knives for the price. The Leek is a great introduction.

Or, you could buy 2 knives with your fifty. Ontario's RAT I and RAT II are some sweet knives.

Depending on your taste. You simply cannot go wrong with any of these knives.

I know Gerber isn't the best... BUT, I have been throwing this thing around for a while, it's a beater and it is sturdy enough for the tasks you plan on doing:
http://www.amazon.com/Grylls-Ultimate-Knife-Fixed-Blade/dp/B009XMYKOI/ref=sr_1_23?s=hunting-fishing&ie=UTF8&qid=1398715605&sr=1-23&keywords=gerber+knives

The only problem with that is that it is at your price limit, and it probably isn't the best you can get for the money (you're paying for that sweet Bear Grylls sponsorship ;) )

Because of that, I also would recommend this:
http://www.amazon.com/Schrade-SCHF9-Extreme-Survival-Carbon/dp/B0033H7VI6/ref=sr_1_2?s=hunting-fishing&ie=UTF8&qid=1398715810&sr=1-2&keywords=Cold+Steel

The only thing with this knife is that it is made of a high carbon steel, which means you'll need to care for it just a teeeeeny bit. You will need to occasionally treat the blade with a light oil or a corrosion inhibitor to keep it from rusting. This really isn't a big deal, it would only take ~5 minutes after every time you use it before you put it into storage.

The Ontario RAT1 and [Spyderco Tenacious] (http://www.amazon.com/Spyderco-Tenacious-Handle-Folding-Plain/dp/B001EI7578) are great knives in the $30 range that can accomplish all the activities you have listed without an issue.

This list and thread from the sidebar lists many good suggestions as well.

So some will be a little more then 40 but the performance and customer service is worth it.

Cold Steel Extra Large Voyager Clip Pt. Plain https://www.amazon.com/dp/B07DPW4LJG/ref=cm_sw_r_cp_api_i_x3eXDbMZTEMNN

Buck Knives 119 Special Fixed Blade Knife with Leather Sheath - Black Handle https://www.amazon.com/dp/B000EHWWJQ/ref=cm_sw_r_cp_api_i_H4eXDbKPRCS8H

Cold Steel Peace Maker II https://www.amazon.com/dp/B00BD57RZW/ref=cm_sw_r_cp_api_i_Z5eXDbFY372C4

Ontario Knife Company 8667 Rat-5, Plain Edge with Black Nylon Sheath https://www.amazon.com/dp/B075NNXMSC/ref=cm_sw_r_cp_api_i_06eXDbRS3PEXY


Buck Knives 620 Reaper Black Fixed Blade Survival Knife https://www.amazon.com/dp/B00RQ7WQ2K/ref=cm_sw_r_cp_api_i_e.eXDbT0Y0DW9

I have had a shitty week so I treated myself to a grab bag. Probably won't get anything super great, but I hear it is fun to sort it all out. Thanks Op.

Edit: Thanks for whoever gave me gold! Long story short, this knife will cut the nerve in your finger with the slightest slip up and will require surgical repair.