Reddit mentions: The best jar openers
We found 136 Reddit comments discussing the best jar openers. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 35 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. EZ Off Jar Opener - Under Cabinet Jar Lid & Bottle Opener - Great for Seniors & Weak or Arthritic Hands
- THE EZ OFF JAR OPENER WILL OPEN TOUGH LIDS EFFORTLESSLY - EZ Off will grab hold of any lid whether it's factory sealed, child proof, tamper proof or just stuck from what's inside the jar. A simple twist and The EZ Off Jar Opener will deliver
- OPENS ALL JAR LID SIZES -- Try anything small like a bottle of water, nail polish or a wide container of pickles, peanuts, canned fruits, jams, molasses, marshmallow creme or maraschino cherries
- INSTALLATION AND OPERATION ARE EASY -- It's easy to install the EZ Off with the pre-attached, peel-and-stick adhesive and the 3 included screws. It's ideal for children, the elderly, those with arthritis, carpal tunnel, those working in kitchens and those with limited use of hands or amputees
- YOU'LL NEVER KNOW IT'S THERE -- This jar opener hides neatly out of sight under a cabinet, cupboard, counter, or shelf, taking no valuable storage space
- THE EZ OFF JAR OPENER IS MADE IN THE USA -- The EZ Off is made with premium materials by American workers here in the USA.
Features:
Specs:
Color | White |
Height | 0.7 Inches |
Length | 7.2 Inches |
Weight | 0.31 Pounds |
Width | 7.2 Inches |
2. Progressive International Silicone 3 Piece Jar Opener Set
- Durable red and blue silicone construction
- Provides superior grip when opening stubborn jars and containers
- Takes the effort out of opening seals and lids
- Hand wash
Features:
Specs:
Color | Silver |
Height | 3.93700787 Inches |
Length | 5.905511805 Inches |
Number of items | 1 |
Weight | 0.1543235834 Pounds |
Width | 5.905511805 Inches |
3. Evriholder Easi-Twist 1pk, Easy Grip Jar Opener, Pack of 1, Colors May Vary
- PATENTED JAR OPENER - The four size options make it easy to fit practically any size bottle or jar. From ketchup bottles to pickle jars, and apple juice jugs to peanut butter containers, you'll never struggle to unscrew a cap again.
- WORKS WET OR DRY - Where other jar openers might struggle to open wet containers, the Easi-Twist is ideal for use with wet jars or wet hands.
- DURABLE & ERGONOMIC DESIGN - The handle is easy to grip and hold and is ideal for those with limited hand strength, hand injuries, or those suffering from arthritis.
- GRIP, TWIST, & ENJOY - The Easi-Twist is simple to use. Just fit the jar or bottle lid into the appropriately sized opening, grip, and twist.
- PREMIUM QUALITY: Made of BPA-free plastic and rubber. Simply hand wash after every use, and the Easi-Twist will last for years.
Features:
Specs:
Color | Tan |
Height | 10.5 Inches |
Length | 0.9 Inches |
Number of items | 1 |
Size | 1 PK |
Weight | 0.000625 pounds |
Width | 4.4 Inches |
4. Trudeau Silicone Twist Jar Opener (Random Colors)
- Opens jars with less effort, easy to use
- Adjustable to most sizes of bottle jars
- Easy to clean, dishwasher safe
- Sold Individually, your may receive either Color Red, Green or Blue
Features:
Specs:
Color | Blue |
Height | 1.968503935 Inches |
Length | 0.0787401574 Inches |
Weight | 0.04 Pounds |
Width | 2.362204722 Inches |
5. OXO Good Grips Jar Opener with Base Pad,Black,9'' x 5'' x 1''
- Jar Opener base pad keeps jar in place, reducing force required to open jar
- Sharp, stainless steel teeth grip jar
- Place it under the jar, slide the Jar Opener over the lid and twist counter-clockwise to loosen.
- Contoured, non-slip grip for better leverage
- Jar Opener is dishwasher safe, hand wash base pad
Features:
Specs:
Color | Black |
Height | 5 Inches |
Length | 9 Inches |
Number of items | 1 |
Size | 9'' x 5'' x 1'' |
Weight | 1 Pounds |
Width | 1 Inches |
6. Dura-Grip Brand Easy-Grip(TM) Natural Rubber Jar Opener - Set of 4
- Made in USA of 100% natural rubber
- Opens any jar lid with minimal effort
- Washable - Easy Care
- Lasts for years with no maintenance
- Set of four 6 inch round jar openers
Features:
Specs:
Color | Green |
Height | 0.13 Inches |
Length | 6 Inches |
Size | 6 inches round |
Weight | 2 ounces |
Width | 6 Inches |
7. Hamilton Beach Open Ease Automatic Jar Opener, Model 76800
Effortless push-button openingSimply place the jar opener on top of the jar and press the engage buttonCompact for easy storage in a drawer or cabinetOpens a wide variety of jar sizes-no jar is too tallDurable and built to last. Please refer the User Guide and the Instructional video before use.
Specs:
Color | White |
Height | 7.8 Inches |
Length | 5 Inches |
Number of items | 1 |
Size | 1 Set |
Weight | 1 Pounds |
Width | 3.2 Inches |
8. NORPRO 597 Non-Slip Rubber Jar Opener, 1 EA, White
- Rubber grips the lid making jar open quickly and easily.
- Ideal for small to large lids.
- Also use as a rubber mat to hold wet or slippery objects.
- Essential for every kitchen.
- Measures: 6" X 6"/ 15cm x 15cm
Features:
Specs:
Color | White |
Height | 0.1 Inches |
Length | 6 Inches |
Number of items | 1 |
Size | 1 EA |
Weight | 0.03 Pounds |
Width | 6 Inches |
9. Prepworks by Progressive Jar Grips Multi-Purpose Lid Openers, Set of 3
OPEN STUBBORN JARS OF ALL SIZES: Three durable jar grips provide superior grip when opening stubborn jars and containers of all sizesTHREE DIFFERNT SHAPES: Comes in three individual shapes and colors for every kind of jarINNOVATIVE DESIGN: Teal square and green round flat grip for large jars and red...
Specs:
Color | Assorted |
Height | 2 Inches |
Length | 5 Inches |
Number of items | 1 |
Size | A |
Weight | 0.2 Pounds |
Width | 5 Inches |
10. JarPop - Jar Opener - Crystal Green
World's Easiest OpenerPops the vacuum so lids spin freeNo twisting, no strainDon't Twist It, Pop ItDishwasher Safe
Specs:
Color | Crystal Green |
Height | 1.5 Inches |
Length | 5.5 Inches |
Width | 1 Inches |
11. Robo Twist 1014 – The Hands Free Easy Seen on TV Works on All Ja Jar Opener, Small, White
10 SECOND OPERATION - effortlessly opens jars of all sizes at the push of a buttonUNIVERSAL FIT – the Robotwist is designed to handle jars of all sizes, simply expand or contract dependent on the jar sizeEASY AS 1-2-3 - simple operation; position it on the lid, press the easy-switch button, and wa...
Specs:
Color | White |
Height | 8 Inches |
Length | 10 Inches |
Number of items | 1 |
Size | Small |
Weight | 1 Pounds |
Width | 4 Inches |
12. Dr.fasting Automatic Jar Opener, Restaurant Jar Opener, Electric Jar Opener! Chef's Best Choice
- Durable Material: Long-lasting durable brass components will function for many years without rusting
- Specifications: 1.58" high pressure gauge: 0-4000 PSI; Flowmeter: 0-15 SCFH; Inlet connection: cga-320
- Application: Perfect for enhancing the amount of available carbon dioxide and accelerating plant growth rates and yields by up to 40% in indoor hydroponics, grow rooms, grow tents and warm houses
- Components: A precision regulator, flow gauge, and industrial solenoid valve, 5 meters free plastic dispensing tubing and USA standard 3-prong plug (hose tail to suit 4.2 mm hose diameter)
- Multiple Options: This CO2 regulator will allow you to maintain ideal CO2 levels for optimal growth
Features:
Specs:
Color | White-new |
Size | White-New |
Weight | 0.8 Pounds |
13. Jar Opener for Weak Hands (Pack of 2) Under Cabinet Lid Openers for Seniors with Arthritis - Cap Remover Easy Twist Off Bottle Opener Jars Kitchen Accessories Tool Counter Top Grip Can Opening Wrench
- EASY TO INSTALL: To install simply peel adhesive from back of the jar opener and firmly place disk in desired space. Remember to place the wide mouth portion of the teeth facing directly towards you when you attach the opener. Ideal for placement under counters or along kitchen shelves. Three Optional screw holes included.
- DIMENSIONS: 2 x 6 x 6 inches
- THE ONLY JAR OPENER YOU WILL EVER NEED: Our jar opener makes it effortless to remove any twist-top lid from jars, cans, and bottles with ease
- OPENS VIRTUALLY ANY JAR OR TWIST TOP: Remove tops from nail polish, jarred fruits and vegetables, twist off bottles, and more. Virtually any container with a twist top can be opened with ease. No more painful frustration or forced spills
- IDEAL FOR: Perfect for people suffering from arthritis, fibromyalgia, or joint pain who find opening jars a daily nuisance. Safe enough for children to use easily and effectively
Features:
Specs:
Color | White |
14. Harold Import Company Brix Original Easy Jar Key Opener, 5.62-Inch, Colors may vary
- Brix Original Jar Key is the World’s easiest jar opener for stubborn vacuum-seal jars by gently lifting the handle without any strain to hands
- Made in Denmark; sturdy and durable; measures 5.62-inches long
- Specially designed for simple and easy use by anyone, even kids and people with arthritis and carpal tunnel; no sharp edges or moving parts
- Compact for easy storage in the kitchen gadget drawer; keep a spare in the garage, boat, camper, and anywhere jars need to be opened easily
- Jar Key (formerly Jar Pop) is endorsed by arthritis associations worldwide; dishwasher safe for easy cleanup
Features:
Specs:
Color | Red |
Height | 3 Inches |
Length | 6 Inches |
Number of items | 1 |
Size | Single |
Weight | 0.111 Pounds |
Width | 3 Inches |
15. LAROSA MEDICAL Can and Jar Opener Ergonomic Bottle Opener for Seniors, Elders & Arthritis Sufferers - Quick Opening for Cooking - Simple to Use - Easily Apply for a Variety of Kitchen Cans and Bottles
- 5 in 1 jar opener
- Opens 1-3.5 inch jars with ease
- Multi-function tool
- Opens beer bottles
- Clean off with damp towl
Features:
Specs:
Color | Red |
Height | 2 Inches |
Length | 10.5 Inches |
Number of items | 1 |
Size | 10-Inch |
Weight | 0.35 Pounds |
Width | 5.5 Inches |
16. Kichwit Jar Opener Stainless Steel, Bottle Opener Keychain Included
- Rust Resistant Jar Opener - This jar opener is made of heavy stainless steel and solid hard plastic handle that will last and not rust. Comes with a free bottle opener key chain that's made of aluminium alloy, which is a bonus.
- Sturdy and Durable - Suitable for jars with lids between 1” to 3.7” diameter. The jar opener is made of sturdy material and super durable.
- Easy to Twist - The stainless steel teeth on the clamp grab the edge of the stubborn lid tightly and hold it the entire time you are twisting. Easily opens most jars with a simple twist!
- Sweet Gift for Those with Arthritis Hands - With this arthritis jar opener, you will no longer have to struggle to open lids any more! Perfect for seniors and those with arthritic hands.
- Compact Kitchen Tool - This jar lid opener is easy to store and takes up small space in your kitchen drawer. Definitely a must-have kitchen tool!
Features:
Specs:
Color | Silver |
Height | 1.8 Inches |
Length | 3.6 Inches |
Size | 3.6 Inch L x 0.9 Inch Dia |
Weight | 0.3125 Pounds |
Width | 2.6 Inches |
17. 1 Pc Jar Pop Jar Opener Jarpop Jarkey Vacuum Breaker Key Rim Lid Lifter Top New
Brand NewExcellent QualityFast Shipping
Specs:
Height | 0.8 Inches |
Length | 8.6 Inches |
Weight | 0.1 Pounds |
Width | 3.4 Inches |
18. Jar Openers Rubber Non Slip Jar Bottle Lid Grip Opener Pad Gripper 2-Pack New
- DESCRIPTION Twisty Jar Openers 2 Pack - Kitchen Tools & Gadgets Features: Package of Two Jar Openers Non-slip Grip For Jar Lids and Bottle Caps. Just place this specially designed rubber gripper over the lid of any jar or bottle and twist. The textured rubber gives you the extra grip needed to open those stubborn jars Also Works As A Coaster 1 - Round 4 3/4" Red 1 - Square 5" Yellow FREE SHIPPING (All of my items are In Stock and Ready To Ship)
Features:
Specs:
Color | As picture shown |
Size | 4 3/4" |
19. Screwy Lewy Twist Jar Opener
Rubber jar openerRubber grips the lid making jar open quickly and easily
Specs:
Height | 5.8 Inches |
Length | 4.4 Inches |
Weight | 0.1 Pounds |
Width | 0.4 Inches |
20. Leifheit 03068 Comfortline Jar Opener
- Classic European designed jar opener made to open all sized of jars easily
- Comfortline products are designed for practicality, with a focus on ergonomics and fuctionality
- Manufactured in white ABS plastic for clean, simple style
- Soft red thermoplastic ensures comfort and non-slip stability
- Dishwasher safe with a 3-year guarantee
Features:
Specs:
Color | White/Red |
Height | 10 Inches |
Length | 3.5 Inches |
Size | Standard |
Width | 0.5 Inches |
🎓 Reddit experts on jar openers
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where jar openers are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Hi! I'm a medical student with RA, diagnosed 10 years ago when I was in high school. The experience of a flare and getting this diagnosis is such a pain in the ass (the literal, figurative, and emotional asses) if we're being quite frank. When I was diagnosed and then later on when I had a rough, persistent flare, the emotional burden was pretty heavy. There was a lot of crying, a lot of anger (at God, my genetics, my immune system, etc.), and a lot of stubborn refusal to utilize or even ask for things that could've made my life a bit easier. You've already taken that step by posting here, so that's one down! This sub and finding peers who either are going through similar things (there were a surprising number of women with autoimmune disorders in my class) or were just good, understanding people made a huge difference for me. If you're comfortable talking about your experience to others, I think might be surprised at how many people know the struggle.
Physical things that I did find helpful:
Being comfortable talking to people about it might take time, but you'll definitely get there soon. You're a doctor! You've had to learn how to talk to people about all sorts of uncomfortable things, so you can absolutely do this. Remember that although you have this diagnosis, you did nothing to "earn" it and therefore theoretically there's nothing to be embarrassed about. I know it's easier said than done. Try starting with people you know and trust- close friends, family- and then branch out as you're comfortable. I honestly make jokes about my "crap joints" and how "my body is rejecting me" quite often, and I find that the self-deprecating approach works well for breaking tension while talking to others about my RA.
Finally, it might feel like you're going stir crazy in your own body because doing anything physical is just a recipe for pain right now, but it will get better and you will get back to being active. "Normal" might not be the same as it once was, but you'll re-define it for yourself and your illness. You've just now been diagnosed, so your journey to finding the treatment plan that will work for you is just beginning. I'm sure you know these meds take time to reach their peak effect, so be patient (again, easier said than done, I know) and keep an open dialogue with your rheumatologist about how things are progressing. Be as active as you can stand without hurting yourself, even if it's just walking. Hopefully MTX will fix you right up in no time and you'll be back to doing all of the activities lickity split!
​
Wow, okay, that's a lot. Um...
tl;dr For ease of use, make things fatter, squishier, or grippier. If you can handle doing a full medical history and physical exam , you can deffo handle the RA talk. It gets better. <3
lincthesink had some good comments, here's what I'd like to add on to them:
1 - You shouldn't really be depending solely on your LCD monitor to judge exposure of the scene. So many factors are in play here (the light hitting the monitor itself, the general light conditions of the scene, etc.) and can cause the apparent exposure on the LCD screen to vary. What you should be doing is base your exposure judgements on a histogram or waveform display that should be overlaid on top of your screen. You can then check if anything is "clipping" in the scene (peaks going beyond the right or left extremes) and adjust accordingly. I believe the 60D has this feature natively, but you should download the Magic Lantern firmware for your camera anyway. It has tons of videography tools that are of great help - you can customize your waveform display settings, you can turn on "zebras" (which highlight underexposed/overexposed areas in the way lincthesink is talking about), you can turn on focus peaking, and much more.
2 - I haven't had much experience with this problem firsthand, but my guess would be that your actors/scenes are on a different plane than where the tripod is set up, so even though your camera's "levels" are accurate for the tripod plane, the plane your actors are on might be crooked. This is a fairly simple fix in post-production though, at the cost of some video quality (rotate the image and zoom in as necessary).
3 - Nailing focus is one of the most difficult things about shooting on DSLR, especially if you're going for that cinematic shallow depth of field look. If you preset your focus with the digital zoom and you shoot on a tripod, the image will always remain in sharp focus as long as there is no movement in the scene. Because I'm guessing most of your scenes contain movement (otherwise, it would be a boring film!), you often need to compensate for the movement by adjusting focus during the shoot - this is called "pulling focus" and is such a difficult job that it is a highly paid role all by itself on a full film set.
On DSLRs, you can maximize the chances that your shot will be in focus by: 1) stopping down the aperture. The smaller the aperture, the greater the amount of the scene that will be in focus. This is often the most practical solution to solving focus issues, but it requires that you have a lot of light to shine on the scene (to make up for the loss of light entering the lens). 2) using a wide-angle lens. The smaller the focal length, the greater the amount of the scene that will be in focus. This is why GoPro footage usually always has all of the scene in sharp focus - their fisheye lens combined with a narrow aperture ensures that everything will be in focus. 3) pulling focus during the shot. This is the solution that most filmmakers tend to use, as oftentimes you will want to use a close-up lens with a wide open aperture for artistic effects, or because there's not enough light in the scene to justify stopping down. However, physically putting your hand on the focus ring and turning it to adjust the focus tends to shake the camera too much and is generally not ideal. Thus, it's best to invest in a "follow focus", which is basically a gear that attaches to the focus ring that allows for external control of the focus (typically by a knob). You can get simple ones for as cheap as $3.50, but the more "legit" ones typically start at around $50.
I could write a whole other post just about the process of pulling focus, but there are basically two ways to do it: by eye, or by pre-marking the scene. If you want to pull focus by eye, I'd suggest investing in an external monitor for your DSLR or at the very least a viewfinder extender. This will allow you to see the image and judge focus much more clearly. You'll want to turn on focus peaking in Magic Lantern, which will highlight the in-focus areas with brightly colored dots. Then, as the scene progresses, you can adjust the focus nearer or farther away as your subjects move. This method is very hit-and-miss, but if you take time to develop this skill you will eventually get better at it. The second method is to first "block" your scene - have all your subjects move to where they will be moving, practice all the camera movements, etc. At certain points in the scene you will use a tape measure (or other distance measuring device) to measure the distance between the subject and your lens and write it down, making a marking on your lens or follow focus device so you know where to turn to at that point. When all this is done, during the actual shoot, you'll rely on these focus markings and measurements to operate the focus rather than looking at the scene. This has the potential to be much more spot-on than just doing it by eye, but it requires a lot more prep work and is typically a stand-alone job apart from the main camera operator (as it's difficult to move a camera and operate a follow focus at the same time!)
Hope this helps!
I'd recommend a Robotwist .. bought one for my mum (as she often has Jars lined up for me to open :-) ) .. this one (as on TV) is fully automatic. She just puts it on the jar and gets on with something else and in less than a minute .. Open. Although tbh is kinda fun to watch it do its stuff :-) https://www.amazon.com/Robo-Twist-Electric-Opener-Small/dp/B01H42KIKS/ amazon so no worries. OK I'm not so much the opening 'hero' but happy mom = happy son :-)
Some products I find help:
Freezing things is a great idea. He could still help you prepare and cook the things, and still have options if he doesn't have energy to cook sometimes. Lots of people do this, hence the sub /r/MealPrepSunday :P
Maybe consider a crockpot (/r/slowcooking)? Might be good for a beginner, and the recipes usually don't require a ton of work.
This likely won't be an option now, or ever, but if it comes up: a powerchair with an elevate feature is amazing. I mostly use this feature in the kitchen and am honestly unsure how I'd manage without it. (I'm probably overall weaker than your brother, but I can stand for a little bit, too. "A little bit" doesn't really cut it while cooking, IME.)
One site that's great for beginners, I think, is Budget Bytes. They provide step-by-step pictures for most/all recipes, and, obviously, aim for affordable dishes.
EDIT: Toaster ovens are amazing and so much easier than a regular oven.
Outside of aliexpress, they're just called rubber jar openers, so I thought it'd be easy to find. But the closest thing I could find was a rubber coaster:
/item/Cute-Colorful-Silicone-Soft-Rubber-Coaster-Cup-Mat-Pad-Hot-Mug-Glass-Plate-dining-table-placemat/32837594054.html
Whenever I looked for jar openers I find instead:
/item/Hot-Creative-Jar-Opener-Multi-Purpose-Jar-Lids-Bottle-Cap-Grip-Twister-Rubber-Opener-Tool/32793137438.html
(Didn't put full link to prevent being auto-hidden, but they're aliexpress links.)
On Amazon, I found them easily though.
/NORPRO-597-Non-Slip-Rubber-Opener/dp/B000HEKQTY/
which is exactly like what I have at home.
But... yeah Amazon is too pricey in comparison. Also using Google Shopping, I saw some sites that make/sell promotional items give free samples of these.
So, here are some really practical things I like to do as gifts, because they're things people don't really think about, but when you don't have them... so annoying!
Add a bottle of wine, cuz the rest of this shit is boring af.
I think you're talking about follow focus? And if you are trying to follow focus with a kit lens (probably the 18-55mm or something similar?) it's definitely tricky to do that. Back when all I had was a kit lens, my friend turned me onto these little jar openers to wrap around the lens. The slight resistance makes it much easier to change focus manually.
I do recommend buying some better glass and a decent tripod. Even Canon's 50mm is only about $100 and it looks great as a beginner lens.
Oh no! I double checked, and the brand I have looks the same, but is called Instecho. It was only $20 when I got it, but is showing as $41 right now. It's been amazing:
https://www.amazon.com/dp/B07GZB3FJT?ref=ppx_pop_mob_ap_share
An Amazon search for Instecho jar opener shows some got $20. Good luck!
Something like this is what I mean for the jar opener.
https://www.amazon.com/dp/B000BKZUJK/ref=cm_sw_r_cp_apa_mh0MBbFVRKK7K
I find it to be easier but it may not work with all bottle types. I'm glad I was able to help in some way. I still have days where I get down on myself because I expect myself to be able to do things I can't really do anymore but wish I could and I have to remind myself that different does not mean bad.
I got my mom one of these doodads and it works great. It's been about 10 years and it's still going strong. I want one for me (no arthritis in my hands, it's just hard to open jars sometimes, lol). https://www.amazon.com/dp/B01GEVLJPI/ref=asc_df_B01GEVLJPI5488645/
She has one of these, too, to help carry groceries and swears by it. Hers has a padded handle, but otherwise is similar. https://www.aliexpress.com/item/POP-Trip-Grips-Shopping-Grocery-Bag-Holders-Handle-Carrier-Lock-Labor-Save-Tool/32589510144.html
I know they make attachments for oven/stove dials that can be used to make the dials easier to grip.
ETA: Oh, and for standing, I don't have shoe recommendations, but I know that some restaurants will get thick padded mats for employees who have foot issues, to make standing at a station for a long period easier. Maybe get a couple for in front of the stove/sink/her preferred work area?
My (tiny, small-handed) mother had this great device for opening jars. It was just a pair of rails at a slight angle to each other \ / that mounted on the underside of a cabinet. The rails had rubber on the interior. To open a jar, you slid the jar into the rails until its stopping point (it accommodated all lid sizes) and then used the strength of both arms to turn the jar, leaving the lid behind. Arm strength >> hand strength (and ingenuity > brawn).
EDIT: it looked something like this. This is not a plug; I suggest search terms "under the cabinet jar opener," or just to build one yourselves.
I've used these before and they're not great, but are sure cheap.
These seem like they would work well.
Not amazing, but do get the job done, but take some effort. They do have a bunch of other uses, though.
You should get a jar opener because this has saved me from-
Is a $10 giftcard ok? If so I would like that please.
You are absolutely beautiful, you look like a pretty princess today.
You need some of these: https://www.amazon.com/Piece-Flexible-Jar-Opener-Set/dp/B0000CF3MP
The really thin sheet ones like these work the best and there is a good chance you have some in a junk drawer already.
I am COMPLETELY fascinated by [this] (http://www.amazon.com/EZ-Off-Jar-Opener/dp/B000X6K9J8/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&amp;colid=1YTC4RSBV4Y1Q&amp;coliid=I1HZSAG3018DSA), how awesome!
My mom's hands are so bad she can barley open the peanut butter now. I got her one of these "Robo Twist Jar Opener" https://www.amazon.ca/dp/B01H42KIKS/ref=cm_sw_r_cp_apa_i_atmUDb2X0M6N3
Not that exact one but one like it. She told me it's a life saver. She loves her pickles too.
A wine stopper or something else with a taper, maybe a plastic funnel, and a rubber bottle opener like this, or maybe a cork, comes to mind. Or you can use pliers and the rubber bottle opener to grip the inside by opening the pliers and slowly turn it while pulling. Good luck!
My wife got this jar opener for me last year, works great if she's having problems gripping.
Another thing that's been awesome is the Bed Buddy, you can warm it up in the microwave, and it's very flexible...works as a cold pack, too.
When I owned a Subtank I had this same problem. I used a rubber jar/bottle opener to get a better grip and managed to get it open, something like this: http://www.amazon.com/Progressive-Flexible-Jar-Openers-Set/dp/B0000CF3MP
If you have a cloth mousemat with a rubber backing that should work too. I hope you can get it open!
I have this weird plastic and rubber thing that you put on the cap and twist to easily open bottles and jars. I found it at my Grandpas house when I moved in and its the best thing ever! But my green tea consumption might be getting out of control now because I can open the bottle so easily...
This is the exact one I have!
Yes! I have this one and it's wonderful!
Don't let her see the EZ Off opener: https://www.amazon.com/EZ-Off-NA-Jar-Opener/dp/B000X6K9J8
Got this for my mom a few years ago and her jar opening success rate went from 25% to 100%.
I've never tried one of these but it looks like it would help.
I have one of these and it's amazing for opening things. :) Edit: fixed link.
Agreed, first comic I actually LOL'd to all day.
Good advice: get a jar opener. Be it a man or one of these guys, it will save your hand, face, and other bits from destruction.
Ugh, hand-crank can openers. I was so happy when the soup companies started putting the easy-pull tabs on their can lids.
My partner had an awesome low-tech contraption at the last place we lived: a wedge-shaped can opener mounted on the bottom of the cabinet. You just pushed the can lid into the wedge and rotated. Fucking brilliant.
This jar lid popper has allowed me the freedom to open any jar! It just breaks the seal immediately. I got mine at Canadian Tire, but this is what it looks like: https://www.amazon.com/Opener-Jarpop-Jarkey-Vacuum-Breaker/dp/B01D50U4IE
I got one of these as a stocking-stuffer a few years back. I was skeptical at first, but it works great.
I just like these grip things. You can get them for free as merchandise sometimes.
my chest is covered with scars now. Baby want to roll my skin in his fingers. He would have to wear socks on his hands 24/7 since he is a frequent and sleep nurser. A person from LLL said she had great success using a piece of gripper like THIS haven't tried it yet but will in a few days.
Best $15 I've spent in my life. Opened over 1000 jars over 15+ years and it still works
https://www.amazon.com/EZ-Off-Opener-Sizes-White/dp/B000X6K9J8
Works for all bottles and don't have to waste duct tapes
Lol nice, also i remembered. I use these to open up locked up tanks
/u/ZeosPatera and /u/tulon64
I have some of these. I just cut one of them up to fit inside of the cups.
This is probably the best form of the mod I've heard yet.
Something like this might be helpful. You can use them on multiple sizes and materials :)
Do you know those rubber things to open jar lids? I use them to grip my motors. Work perfectly. I believe a rubber band would have the same affect. http://www.amazon.com/Progressive-Flexible-Jar-Openers-Set/dp/B0000CF3MP
I have tried pliers. I was afraid i was flexing the bell housing too much. I could hear the glue crunching.
My secret to opening jars. These work so well because you get great leverage with them.
These things work great. Never been unable to open a jar since I got some.
OXO makes a great jar opener. Got one years ago and it always works.
I use one similar to these and it's awesome: https://www.amazon.com/Brix-Original-Arthritis-Sufferers-5-62-Inches/dp/B00634DSMY/ref=sr_1_13?s=home-garden&amp;ie=UTF8&amp;qid=1480631663&amp;sr=1-13&amp;keywords=jar+opener
The Jar-Popper. This thing is awesome, I've given dozens away as gifts.
This one is awesome: https://www.amazon.com/gp/product/B000X6K9J8
(i mostly use it to open little plastic bottles of apple juice for my daughter)
Get a Leifheit jar opener like this:
http://www.amazon.com/Leifheit-03068-Comfortline-Jar-Opener/dp/B002BU6N58
My mom still uses the same one she bought 40 years ago and still works like new.
I use something like this. I just bought a set of 4 for like $2 or $3 at the grocery store. I just put my phone on that while it's on the table.
This works well.
OXO Good Grips Jar Opener with Base Pad https://www.amazon.com/dp/B002DWA6KM/ref=cm_sw_r_cp_api_i_UFA1CbVR82BMF
True, the trick on the lock ring is to make sure that you never tighten it more than "slightly snug." And that also goes for when putting on the catch jar because you can accidentally tighten the bottom ring without meaning to.
That said, it is very easy to over-tighten the lock ring if you are not paying attention. I've only done it a few times in 3 years, but the first time it was so damn tight I ordered two of these: https://www.amazon.com/dp/B000BKZUJK , one for each ring.
It was the only way I could get it to loosen up. I have strong hands, but could no matter how hard I gripped and twisted, it wasn't enough. I needed both wrenches.
I've never tightened it that much since, and so the couple other times I only needed one of the jar wrenches.
This can opener is amazing https://www.amazon.com/EZ-Off-Jar-Opener-Sizes/dp/B000X6K9J8
Keep one of these in your pocket and always be a hero.
There is the less expensive, if not less cool, version
I've had one for years and loved it so much. You can get them from amazon
This jar opener for $0.79 + $1.64 shipping!
Thanks for the contest!
messed up my wrist opening a jar and since then i've tried so many jar openers! i can't remember the brand i have but this is the style i use that has been so immensely helpful: OXO Good Grips Jar Opener https://www.amazon.com/dp/B002DWA6KM/ref=cm_sw_r_cp_apa_NUxkybC257EAH
You might already know this, but they make rubber grip thingys that make opening a jar SO MUCH EASIER. My husband bought them for me because he got tired of opening all of my jars for me - such a game changer.
For those of you that are curious, I found this product on Amazon. I think I might get one for my mom!
This one is correct
EZ Off Jar Opener For All Jar Sizes, White https://www.amazon.com/dp/B000X6K9J8/ref=cm_sw_r_cp_apa_i_miMFDbV07CMDW
Luckily there's a few options to make those damn pickle jars open easier.
If the last link can't get it open you have just found an indestructible pickle jar :)
I use one of these. Better then using a metal tool
OXO Good Grips Jar Opener with Base Pad https://www.amazon.com/dp/B002DWA6KM/ref=cm_sw_r_cp_api_Z8yRAbA59YJST
They're not hard at all if you have this. The funky cone-shaped rubber jar grip is one of the most useful things that I own. I can open just about any jar with it.
pick up some of these for the future
http://www.amazon.com/Prepworks-Progressive-International-GT-3236-Grips/dp/B00F67TLFC/ref=sr_1_1?ie=UTF8&amp;qid=1425835664&amp;sr=8-1&amp;keywords=jar+grip
it's saved me from fucking up the skin on my hands trying to get tanks apart and whatnot
i use a rubber jar grip to help tighten them on.
learned that from someone who uses them on a ChiaGoo interchangeable set. I use it on my KnitPicks interchangeable now too.
My wife and I bought a house from an old lady and there was this thing mounted under the cabinets. Took us a real long time to figure out it was for opening jars.
It's like this: https://www.amazon.com/EZ-Off-NA-Jar-Opener/dp/B000X6K9J8/ref=sr_1_9?ie=UTF8&amp;qid=1469291124&amp;sr=8-9&amp;keywords=jar+opener
Something like this?
https://www.amazon.com/OXO-Good-Grips-Jar-Opener/dp/B002DWA6KM
Something like this would do it, http://www.amazon.com/Easy-Grip-Natural-Rubber-Jar-Opener/dp/B008W052RQ
I have one like this. I've seen them at walmart for around 4$. It will open large jars and small water bottle caps. You don't have to grip both handles as you open. I've found out you can just grab one handle and twist if it fits snugly enough to the lid.
silicone lid opener works every time
you can get a cheap one at the $0.99 store or go fancy and put something like this one your keychain: http://www.amazon.com/Trudeau-Silicone-Opener-Random-Colors/dp/B003FPEA0I/
i just got a kannastor Gr8ter (v2)and it's got no/low resistance.. not sure if my old one was crap (old SLX), or this one is that good.. it's non threaded (the grinding part).
https://www.youtube.com/watch?v=OYpCMNZU5rY&feature=emb_logo
&#x200B;
instead of a new grinder, have you thought about getting an "assistive device"?
like grippy pads you use to grab stuff? you wouldn't need fingers as much, you could just use your palms..
https://www.amazon.com/Prepworks-Progressive-Grips-Multi-Purpose-Openers/dp/B00F67TLFC/
and they help with other stuff besides grinding.
&#x200B;
look at arthritis stuff.. assistive devices,..
you got an old crappy mousepad laying around?
https://www.amazon.com/Rubber-Jar-Opener-Grippers-Arthritic/dp/B07L59RQ6G/
&#x200B;
these are nice and thick.
https://www.amazon.com/dp/B01G3HJROS/
I have the solution. Cheat.
In my city, there is a surprising number of young women who leave their doors or windows unlocked and have had a guy nicknamed the 'sleep watcher' enter their house/apartment. As obvious as this sounds, my recommendation is to lock your doors and windows. Also consider a silicone jar opener for all your pickle needs.
You probably tightened it down too much. It only needs to be snug, not torqued down.
The best thing I've found for unsticking lock rings is those little rubber grippy pads that are sold for opening stubborn jars. Supermarkets usually sell them in the canned goods section. Something like this: http://www.amazon.com/Easy-Grip-Natural-Rubber-Jar-Opener/dp/B008W052RQ
In a pinch, you could use a wrench with a towel wrapped around it to protect the finish on the mod, but there's still a risk of slipping and scratching it up.
I got this set of jar grips a couple Christmases back. NOTHING CAN STOP ME NOW.
Anything where you have to stick something to the battery is a waste of time and money.
The silicone pad you linked is prolly best. But obviously they're out of stock.
Something you can try are those rubber gripper things people use to open jars.
https://www.amazon.com/Progressive-Flexible-Jar-Openers-Set/dp/B0000CF3MP
Cut to size and stick on with double side tape.
Double that with the right kind of strap and you're golden.
It's an under cabinet mounted jar opener
Edit - similar https://www.amazon.com/EZ-Off-NA-Jar-Opener/dp/B000X6K9J8/ref=sr_1_2/159-1085766-4860355?ie=UTF8&amp;qid=1469344912&amp;sr=8-2&amp;keywords=under+cabinet+jar+opener
I use jar grippers to get jars open or else it's just not going to happen.
http://www.amazon.com/Progressive-International-GT-3219-3-Piece-Rubber/dp/B0000CF3MP/ref=sr_1_1?s=home-garden&amp;ie=UTF8&amp;qid=1394910530&amp;sr=1-1&amp;keywords=jar+gripper
Better?
A Rubber Husband! We've also got this thing.
http://www.amazon.com/dp/B00F67TLFC/
Used to open jars and bottles. Amazon product link
A jar opener.
http://www.amazon.com/OXO-Good-Grips-Jar-Opener/dp/B002DWA6KM/ref=sr_1_1?ie=UTF8&amp;qid=1417133405&amp;sr=8-1&amp;keywords=jar+opener
We can open our own pickle jars. We just need this thing.
https://www.amazon.com/Prepworks-Progressive-Multi-Purpose-Openers-Gripper/dp/B00F67TLFC/ref=pd_aw_fbt_79_img_2/146-9395880-7388848?_encoding=UTF8&amp;psc=1&amp;refRID=Y0YS1X4YJF3BQNVZ0ZST
similar
Jar opener. Wedge the jar lid into the teeth (two sizes for different jars), and turn.
Here's the modern version:
http://www.amazon.com/OXO-Good-Grips-Jar-Opener/dp/B002DWA6KM
Cross post from /r/OneHanded
Someone mentioned it further up in comments :
https://www.amazon.com/EZ-Off-Opener-Sizes-White/dp/B000X6K9J8
Here you go, even a grandma can open jars with this. I love it.
http://www.amazon.com/OXO-Good-Grips-Jar-Opener/dp/B002DWA6KM/ref=sr_1_1?ie=UTF8&amp;qid=1422731928&amp;sr=8-1&amp;keywords=jar+opener&amp;pebp=1422731702022&amp;peasin=B002DWA6KM
lol
Mounted one of these under an upper kitchen cabinet:
https://www.amazon.com/gp/product/B000X6K9J8/
Joke's on you, I have this!
Get one of these: https://www.amazon.com/gp/aw/d/B000HEKQTY/
I’ve done it before with one of those rubber can lid grip things and a pair of pliers to hold and twist. It might not be perfect but t worked without breaking the glass anymore
one of these
We call this my boyfriend replacer. Fair warning, though: It is super noisy.
Get a jar key. It pops the seal so you can just unscrew the lid without having to deal with that initial struggle.
Get a silicone opener like one of these and they'll turn no problems.
> https://www.amazon.com/Robo-Twist-Electric-Opener-Small/dp/B01H42KIKS/
I also hate using can openers!
What's wrong with you savages? $3 from Amazon for a 3 pack and you'll never have a problem again: https://www.amazon.com/dp/B00F67TLFC/