Reddit mentions: The best lawn mower accessories
We found 28 Reddit comments discussing the best lawn mower accessories. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 21 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Tommyco Kneepads
- Made With dual density closed cell polyethylene foam
- Hard density surface to withstand rough surfaces
- Soft density inner padding for added comfort
- Packaged in attractive colors
Features:
Specs:
Color | Colors may vary |
Height | 2 Inches |
Length | 17 Inches |
Weight | 2 Pounds |
Width | 8 Inches |
Size | One size fit all |
Number of items | 1 |
2. ATVATP 4X 494768 Shut Off Valve for 1/4" Fuel Line for 698183 Cut Off Valve 697947 493960 5091 5091H 5091K & 493629 691035 Fuel Filter
- Fit for 494768 698183 697947 493960 698181 5091 5091H 5091K
- Fit AM107340 AM36141
- Fit 1/4"" Fuel Line
- Fuel Filter fit for 493629 691035 5065 5065D 5065K
- You will get: 4x shut off valve, 4x fuel filter, 2 feet fuel line, 8x clips
Features:
3. EasyShade 6“ X 6” X 2pcs Stainless Steel T316l Wire 20 Mesh Variety of Sizes
Shipping from California.Mesh/inch: 20Wire Dia. inches: 0.0075 Opening. Inches: 0.043% Open: 71; Weight/Sq Yd: 10 ozSize: All sizes were cut from brand new rolls. Custom sizes are available per request.
4. Harbot 799728 Carburetor + 496894S 496894 493909 Air Filter +272403S 272403 Pre Filter Fuel Line Filter for Briggs Stratton 498027 498231 499161 494502 494392 495706 496592 498231 Carb
- carburetor
Features:
6. Virtual Sun BM505G 5-Gallon 5-Bag Herbal Ice Extracts Bubble Kit
- Triple stitched with 100% nylon bonded thread for extra strength
- Virtual sun bubble bags can be used for years, over 100 times
- Made of top quality monofilament.
- Drawstring storage bag - blue - 220 microns - red - 160 microns - orange - 120 microns - yellow - 73 microns - purple - 25 microns
- Free pressing screen
Features:
Specs:
Height | 3 Inches |
Length | 12 Inches |
Weight | 6 Pounds |
Width | 12 Inches |
Number of items | 1 |
7. Podoy Carburetor 640152 640152A Fits HM80 HM100 with 90 degree fuel fitting
- Brand New
- High Quality Carburetor
- Replaces Old Briggs # 796707, 794304
- Package Included: 1pc Carburetor With 2pcS Gasket
Features:
Specs:
Height | 3 Inches |
Length | 4 Inches |
Width | 2.5 Inches |
8. Harbot 397358 Ignition Coil for 298316 395491 697037 395490 5 HP 130200-132200 Horizontal 130900-132900 Vertical Engines
- Carburetor replace # 555075 397358 395491 697037 298316 395490,PT10998
- Fit for 5 HP horizontal and vertical engines
- Fit for 130200-132200 horizontal 130900-132900 vertical Engines
- Fit for 133200, 133700, 135200 & 135700 engine
- Package include 1 ignition coil
Features:
9. Briggs & Stratton 590781 Magneto Armature Replaces 394891, 392329, 394895
Briggs & Stratton 590781New OEM Magneto Armature CoilGenuine Briggs & Stratton PartReplaces Old Briggs # 394891, 392329, 394895, 394988
Specs:
Color | Black |
Height | 11.81102361 Inches |
Length | 15.74803148 Inches |
Weight | 0.5 Pounds |
Width | 15.74803148 Inches |
Number of items | 1 |
10. Briggs & Stratton 398187 Carburetor Float,White
- Genuine Briggs &Amp; Stratton Part Number 398187
- Fits Many Briggs &Amp; Stratton Engine Series
- Genuine Briggs &Amp; Stratton Part
- Country Of Origin: Japan
Features:
Specs:
Color | White |
Height | 5 Inches |
Length | 0.5 Inches |
Weight | 0.02 Pounds |
Width | 4.25 Inches |
Number of items | 1 |
11. Power Plucker Chicken Plucker Drill Attachment - Poultry Feather Remover
- drill powered poultry plucker
- works with any 3/8 drive or larger drill or drill press
- makes the removal of feathers fast and easy
- affordable alternative to tub style machines that can cost thousands
- cut processing time down to a fraction of what is by hand
Features:
Specs:
Color | Green |
Height | 3 Inches |
Length | 10 Inches |
Weight | 1 Pounds |
Width | 3 Inches |
12. 796587 Carburetor Carb for Briggs Stratton 19.5 HP Engine Craftsman Riding Mower Lawn Tractor 19HP Intek Single Cylinder OHV Motor Nikki carb Replace 591736 594601 591731 796109 594593
★Powerful Function : mixe air and gas before the fuel mix goes to the engine,which will help your outdoor power equipment running well and keep it at the optimum performance.It will improve the ease and convenience greatly★Quality Assured : constructed of high quality material for long lasting d...
Specs:
Color | as picture shown |
Number of items | 1 |
13. Buckbock 8 Pcs Carburetor Adjustment Tool Kit for for Common 2 Cycle Small Engine STIHL Poulan MTD Troy-Bilt Trimmer Weed Eater Chainsaw
- 12 pieces Carburetor Adjustment Tool Screwdriver including: Pac Man/ Small Head Pac Man/ Single D/ Small Head Single D/ Double D/ Hexagon/ 7 Teeth Splined/ 21 teeth/Shapda/ Six Star splined screwdriver/Acircle/Small head A-circle.
- 12 pieces Carburetor Adjustment Tool Kit used for MOST 2 cycle carburetor engine Including Sears, Craftsman, Poulan, Hus-qvarna, Weedeater, Echo, Toro, Ryobi, Homelite, and anything else that utilizes the splined adjustment screws.
- Fit for Hus-qvarna Carburetor Adjustment Tool, Stihl Carburetor Adjustment Tool, Weedeater Carburetor Adjustment Tool, 2cycle Carburetor Adjustment Tool, Wal-bro Carburetor Adjustment Tool, Poulan Chainsaw Carburetor Adjustment Tool, Carburetor Adjustment Tool
- Ergonomic designed Carb Adjusting Kit handle provides convenience and comfort for working. Screwdriver Marked with tool type on the handle, easy to recognize.
- Package includes 12 Pcs carburetor adjustment screwdrivers, 4 fuel lines; 120 days money back guarrantee! Lifetime warranty against manufacturer defect!
Features:
14. Carburetor Carb Kit for Kohler Engine SV830 SV740 SV735 SV730 SV725 32 853 12-S
Replaces for Kohler Engine Part : 32 853 12-S & 32 853 08-SFits for Toro Model : 59008, 74375, & 74823Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shippingPlease Note: This is High Quality Aftermarket Parts And ...
15. Panari Carburetor Float Bowl & Needle Seat Kit Primer Bulb for Tecumseh Lawn Mower ECV100 LAV35 TVS75 TVS90 TVS100 TVS105 TVS115 TVS120 631843 631902 631902A 632046 632046A Carb
- For Tecumseh engine: ECV100 LAV30 LAV35 LAV40 LAV50 LAV404 TNT100 TNT120 TVS75 TVS90 TVS100 TVS105 TVS115 TVS120 TVSL90 TVXL90 TVXL105 TVXL115
- Needle seat kit: 631021B 631021A 631021
- You will get: 1 float bowl, 1 needle seat kit, 1 primer bulb & retainer
Features:
16. HURI Carburetor with Gasket for 165S 165SA 170S 170SA Snowblower
- Replacement parts,non original
- Fit 165S 165SA 170S 170SA
- Package include 1pc carburetor + 3pcs gaskets + 1pc HURI pocket tape
- Note:you could apply for a full refund if you didn't receive HURI branded pocket tape.
Features:
Specs:
Weight | 0.56658801334 Pounds |
17. Nisaku NJP2520 Long Sidewalk and Garden Weeder and Sweeper, Authentic Tomita (Est. 1960) Japanese Stainless Steel, Blade Width-7.25", Polished 51" Wood Handle
- Questions? Text 563563 to chat directly with a Nisaku expert.
- The Zassou Burush Obake has a 7.25-Inch Japanese Stainless Steel Wave Blade. The Blade has great tensile strength for more leverage. The Blade is rust and weather resistant, it can also be replaced. The polished durable hardwood is 51-Inches long making it easy to hold and maneuver.
- The Zassou Burush Obake can be used to weed sidewalks and patio cracks for those pesky hard to reach areas. Can also be used in the garden to dig out rooted plants without the need to bend over.
- The Stainless Steel blade that is made and used by Nisaku is recognized as one of the best in the industry. The Blade and handle are very easy to maintain clean. Use water and wipe off.
- Nisaku means Quality. The Nisaku blade is rust-proof and scratch resistant. All the tools are made by Japanese Artisans who have devoted a lifetime to make sure that your tools will be used to perfection for many seasons.
Features:
Specs:
Color | Stainless Steel/Wood Handle |
Height | 1 Inches |
Length | 65 Inches |
Weight | 2.3875 Pounds |
Width | 7.25 Inches |
Release date | July 1905 |
Number of items | 1 |
18. MTD 732-04280B Spring Extension
0.75 OD x 6.375 LGMTD original equipment part90-day warranty for defects in material or workmanshipReplaces 618-0574, 918-0574, 618-0574C and 618-0565
Specs:
Height | 6.5 Inches |
Length | 0.75 Inches |
Weight | 0.18 Pounds |
Width | 0.75 Inches |
19. Briggs & Stratton 694039 Camshaft Replacement Part
Briggs & Stratton 694039Genuine Briggs & Stratton Camshaft ReplacementNew OEM Part
Specs:
Color | Black |
Height | 8 Inches |
Length | 1 Inches |
Weight | 0.33 Pounds |
Width | 7 Inches |
Size | Medium |
Number of items | 1 |
🎓 Reddit experts on lawn mower accessories
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where lawn mower accessories are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I HAVE THE SAME BIKE!
Mine is a GS450TX
TL;DR = fix bike fairly quickly and just ride :)
I hope this helps.
(INCOMING WALL OF TEXT!)
2 years ago I cut my mufflers off and mounted Emgo Shorty's. I also replaced my air box with Uni foam pods. I re-jetted the pilot from 17.5 to 20. I moved the main jet up from 115 to 122.5. I briefly cleaned the carbs with the spray parts cleaner, set the air mixture screws to 3 turns, and reassembled the bike. It ran like crap because I took so many shortcuts. I spent a couple weeks riding and fighting with the bike then I parked it for winter. 2 years went by and I didn't even want to deal with the crappy state my bike was in so I left it parked until we moved (better school zone for kids).
Once we got settled I brought my bike home and started tearing it down.
I spent a couple weeks doing the following:
Bench-sync slide/butterfly valves PDF Guide = http://members.dslextreme.com/users/cbsaunders/gs/gs450_carb_cleaning_guide.pdf
Parts = https://www.partzilla.com/catalog/suzuki/motorcycle/1982/gs450t/carburetor
Rebuild = https://youtu.be/w16in05ANN4
Soak = https://youtu.be/zDkOgnPidPs
Bench-sync = https://youtu.be/AS77T2CUsjI
http://www.jetsrus.com/a_jet_kit_street/suzuki_450_GS450S.html
Test boots for leaks = https://youtu.be/XzjSEYB9RDU
*Modified Uni foam pods: 1) removed half of the inside lip with an knife so the air intake circuit wouldn't be partially obstructed 2) Temporarily restricted Uni pods by taping a ziplock bag around the sides and cutting the bag away from the back end so air intake would be smooth.
Clean tank = https://youtu.be/UpaGo_nq5Rk
https://www.amazon.com/dp/B001KWGA10?ref=ppx_pop_mob_ap_share
https://www.amazon.com/dp/B0041CDW7G/ref=cm_sw_r_cp_apa_i_Pye1CbGHFE87B (buy locally at O'Reilly's cheaper)
(I found a great deal on Kenda Dual Sport K761's at http:/denniskirk.com Front = 100/90-19. Rear = 120/90-17.
Tools needed = Spoons with 2 Rim Protectors https://www.amazon.com/dp/B079JZN5BC/ref=cm_sw_r_cp_apa_i_QEe1CbCMX9JBM
Balance tires easy = E-Z Tire Beads Motorcycle Kit, Ceramic Balancing 2 oz Front + 2 oz Rear. https://www.amazon.com/dp/B00VOAOSDA/ref=cm_sw_r_cp_apa_i_hDe1Cb8QTNKYF
Other notable links:
The GS Resources = https://www.thegsresources.com/
GS Forum = http://www.thegsresources.com/_forum/index.php
Bike Cliff's site = http://members.dslextreme.com/users/bikecliff/
Parts = https://www.babbittsonline.com/oemparts/l/suz/50d3f2caf8700230d8b4bf8c/1982-gs450tx-parts
*** After all this maintenance, my bike starts easily, sounds incredible, shifts wonderfully, is very reliable, and a hell-of-a-lot of fun!
~Best of luck friend~
https://www.amazon.com/gp/aw/d/B00GPEKSK2/ref=yo_ii_img?ie=UTF8&psc=1
That's were I got the mesh from. As for the tank itself, I actually got it from one of my customers whose tanks I take care of as a sir Issac Newton day gift lol. She's quite the character. The light I already linked you. I'm using ADA aqua soil as a substrate. I found some seiryu stones on ebay for cheap, but that all scaping stuff. You'll come up with your own scape. The original link I sent you has all the information on how to mod the spec V for shrimp. Let me know if I can help you in any other way. Good luck and sorry about your shrimps =(
>The only true wisdom is in knowing you know nothing.
An item
Thanks for the contest!
This should be it.
The part numbers for the Walbro carburetor (which is what that one looks it is to me) are 799728, 499158, or 698171. Hope that helps!
I have a decent idea for a the swan. You could use a cheap pink flamingo lawn ornament as the structure of the swan, then you just need to attach the tin foil to it, somehow.
For example, one of the swans from this set of two, for 12 bucks on Amazon is pretty much the exact shape you want. Compare with this sceen. And as abonus, it will keep it's shape more reliably.
Also, will you take pics to show us the finished product?
edits: fixing links
Have you found a better deal than $40(US) for five five-gallon bags?
I guess there must be some kind of blockage in there, but for the life of me I can't find it. I can't get the engine running at all at this point, aside from some brief sputtering sometimes. I haven't been spraying in carb spray, just "Starting fluid", though maybe they're similar?
Do you think it's worth buying a new carbeurator? This is a replacement part (https://www.amazon.com/Zeaauto-Lawnmower-Carburetor-Stratton-799866/dp/B0157T94R8/ref=sr_1_3?s=lawn-garden&ie=UTF8&qid=1496242350&sr=1-3&keywords=briggs+and+stratton+799866)
Would that be something like this? Ignition coil for B&S. This is the first small engine project I've worked on, so I'm unfamiliar with how the ignition system works.
Briggs & Stratton 590781 Magneto Armature Replacement 394891, 392329, 394895 https://www.amazon.ca/dp/B00BWTVIAY/ref=cm_sw_r_cp_apa_i_aWajDbDHNHBQY
Something more like this. What you have is just an ignition coil.
This look like it?
https://www.amazon.com/Briggs-Stratton-398187-Carburetor-Float/dp/B002WNT5SQ
I actually found something like [this] (http://www.amazon.com/Tommyco-KP818-Purpose-Garden-Kneeler/dp/B001JEOH50/ref=sr_1_2?ie=UTF8&qid=1414378853&sr=8-2&keywords=gardening+knee+pad) at Walmart this summer and I've been using that. I have bad knees and it helps a lot. Blankets just don't cut it for me.
You were plucking them by hand? I thought from the pic you rigged some crazy thing like this to the table saw.
Someone on this subreddit recommended "gardener kneepads". I ended up getting a few of these. I keep them beside my yoga mat always.
https://www.amazon.com/Tommyco-Kneepads-Inc-KP819/dp/B001JEOH50
It looks like those might be unavailable, but I wanted to link to exactly what I ordered.
\^ This. The EPA says you can't adjust the carb more then 1/4 turn. Amazon says eff that. There may be some small plastic caps you have to remove first to actually turn the adjustment screws.
Before you go too crazy though, remove the muffler and you should be able to shine a light in and get a look at the cylinder walls. Make sure they aren't scored before wasting any time.
Here is the desktop version of your link
I cannot find the SE model. Here is an SA for comparison. They look the same.
https://www.amazon.com/HURI-Carburetor-Gasket-HUAYI-Snowblower/dp/B015O3EVX4?ref_=fsclp_pl_dp_5
https://www.amazon.com/Panari-Carburetor-Tecumseh-631902A-632046A/dp/B073S7N89R/ref=sr_1_1_sspa?ie=UTF8&qid=1527700608&sr=8-1-spons&keywords=TVS115+carb+kit&psc=1
this is cheaper
Carburetor Carb Kit for Kohler Engine SV830 SV740 SV735 SV730 SV725 32 853 12-S https://www.amazon.com/dp/B07QFHW6BG/ref=cm_sw_r_cp_apa_i_kyCwDbM8V68CS
Manual option: https://www.amazon.com/Nisaku-NJP2520-Blade-Stainless-Sweeper/dp/B01MG8UTLT. Manufacturer has other handle styles and price points.
​
A not exactly manual option: https://www.amazon.com/Red-Dragon-VT-2-23-000-BTU/dp/B00004Z2FP/ref=sr_1_3?keywords=Weed+dragon&qid=1558108224&s=lawn-garden&sr=1-3
​
A chemical option: Pre-emergent. There's Preen (the regular version is just as chemically as roundup) or the organic version which is cornstarch. Both only work against new seeds, not currently growing weeds, so must be applied at the right time.
I used a medium-weight garage door spring to dampen the effects of the bag. I forget which weight spring, however. https://www.amazon.com/MTD-732-04280B-Spring-Extension/dp/B005UATFQA/ref=sr_1_1?ie=UTF8&qid=1469405181&sr=8-1&keywords=200+extension+spring
https://www.amazon.com/Briggs-Stratton-694039-Camshaft-Replacement/dp/B005F6QY90
Its usually because of this. Plastic cam lobes and gears. Talk about built to fail.
I'm just going to throw this out there -- but they may not have even needed to hotwire anything. It used to be very common for construction equipment at a site to all be keyed the same. You did not want a multi-thousand-dollar-an-hour project to grind to a stop because someone dropped the keys to the crane in a hole -- and no one wanted to dig though 400 keys to find the right key for a given machine. In fact, at one point most manufactures defaulted to the same key for ALL of their equipment -- no matter who they sold it to. Some still do.
It was not really a problem because the work sites were secured -- and it would be hard to steal the big equipment anyway, especially if its too large to travel on a typical street, and requires special training to use.