#882 in Shaving products
Use arrows to jump to the previous/next product
Reddit mentions of 25 Single Edge Plastic Razor Blades
Sentiment score: 1
Reddit mentions: 1
We found 1 Reddit mentions of 25 Single Edge Plastic Razor Blades. Here are the top ones.
or
Single Edge Plastic Razor blades - Remove stickers, decals, labels, latex paint, morePerfect for Scraping Sensitive Surfaces Like Chrome,Paint,Wood and GlassSafe and effective alternative to metal razor bladesCell phone repair tool - MADE IN USAFits most standard #9 razor blade holders or use by hand - RAZ100
Specs:
| Color | NEW11 |
| Height | 0.07 Inches |
| Length | 1.55 Inches |
| Weight | 0.01 Pounds |
| Width | 0.75 Inches |
Valid concerns but trust me it’s a breeze to do. Given how hot your CPU gets you will benefit from a proper delid. Granted though you are still within safe temps. The temps are highish but they aren’t abnormal compared to most others. Higher temps do lessen the life of the CPU but we are talking a very small time span compared to the market life of the chip. I’d say you and 99% of all PC builders will have build a second or even third computer before silicone degradation even reaches minimal levels. If that makes sense. Yeah high temps kill it but it’s like saying the three cigarettes you smoked in high school took two minutes off your life when you live to be a hundred anyway. Analogy might be to the extreme but I wouldn’t worry about it.
With that said here’s some links that will help you.
Delid tool and re attachment tool:
https://rockitcool.myshopify.com
Plastic razor blades to remove stock glue (what you mentioned not knowing what to do with, yes remove it the easiest way I’ve done it was using these and a small amount of isopropyl alcohol):
https://www.amazon.com/dp/B01D6EXLR0/ref=cm_sw_r_cp_apip_nvYleOEGfw2EO
Silicone “glue” for IHS re attachment. To be honest the very first delid I did was a 3570k using wood a vice and a hammer and I didn’t reglue it. It’s still alive too. I would personally just use a very small amount on the four corners. Just enough to stick. You are correct in your concern about the stock glue causing the IHS to not make perfect contact with the die. Remove the stock crap and use minimal amount of this and it will be a non concern:
https://www.amazon.com/dp/B0002UEN1A/ref=cm_sw_r_cp_apip_2g9BJXXKzhp9F
Lastly, your liquid metal for the die to IHS and your TIM for the IHS to Kraken. You can use any but it’s probably safe to say Grizzly is currently the go to stuff:
https://www.amazon.com/dp/B011F7W3LU/ref=cm_sw_r_cp_apip_6QNoes1d24uyu
https://www.amazon.com/dp/B01A9KIGSI/ref=cm_sw_r_cp_apip_lBeHQg1WHWPGP
All in all it’s easy and it’s worth it. If you have any questions whatsoever message me or reply here. There are some good videos of walkthroughs (I think one really good one is on rockitcool’s website but I’m not sure). I can find them for you but tomorrow as I’m currently in bed and using a half open eye lid to write this.