#799 in Automotive
Use arrows to jump to the previous/next product
Reddit mentions of Assenmacher Specialty Tools TOY 640 Oil Filter Socket Wrench for Toyota/Lexus
Sentiment score: 2
Reddit mentions: 6
We found 6 Reddit mentions of Assenmacher Specialty Tools TOY 640 Oil Filter Socket Wrench for Toyota/Lexus. Here are the top ones.
or
- Made of cast aluminium
- Package Dimensions: 13.208 H x 3.81 L x 12.192 W (centimetres)
- Package Weight: 0.091 kilograms
- Country of Origin : United States
Features:
Specs:
| Color | Cast Aluminum |
| Height | 1.6 Inches |
| Length | 3.8 Inches |
| Number of items | 1 |
| Weight | 0.3 Pounds |
| Width | 3.8 Inches |
An ASSTOY640 oil filter wrench. They are used to remove the caps of cartridge filter housings (an example with the tool to remove it installed on it) which manufacturers from many makes have started using in place of standard spin-on oil filters.
Instead these housings are a reusable plastic or metal container that house a replaceable filter element (this one is an example of a Prius filter) and depending on the vehicle manufacturer some require special tools to remove the cap correctly without damage.
Others though use a nut on top that you can buy a special socket set for although depending on the access available, you can sometimes use a regular 1/2 drive socket instead (Dodge Grand Caravans for example as they take a 24mm socket to remove).
The main reason why this tool failed though is because many Toyota models are known for breaking these tools when people overtighten the housings on reinstall and then when the next guy goes to remove the housing, it's simply on too tight for the tool to be able to withstand the force required to remove it. Heck I've seen one on so tight that an air hammer was required to finally remove it, followed by the last guy who installed it getting an earful about it.
04152-YZZA6
Amazon sells five packs. http://www.amazon.com/Genuine-Toyota-Prius-Filter-04152-YZZA6/dp/B007OW6JEI
Also, if you haven't done it yet, you'll want the ASSTOY 640 too.
http://www.amazon.com/Assenmacher-Specialty-Tools-TOY-640/dp/B0015PK3AG/ref=pd_sim_auto_3?ie=UTF8&refRID=1MXQBK1ZKTZSDZ4407XX
Dude just buy this and a 24mm socket for it...
Maintenance on Toyota vehicles is easy. If you are buying a truck, you'll have to remove skid plates to get to the oil filter and oil drain plug in most cases. Make sure you have 10, 12, 14, 17, 19, and 21 mm tools. You'll need one of these to change the oil filter.
I bought an oil filter socket on amazon, didn't get the 15/16" socket since my giant crescent wrench fits the nut perfectly to get that filter off. I swear to the gods of car motors that I will never go to a Jiffy Lube ever again. I found out that they didn't replace my filter (I used a permanent marker to write the date and milage on the bottom of the filter where you can see it. I checked later that day and there it was still . I called up the shop and told them what I found. They offered a free oil change, naturally I declined)
I have broken 2 of these. I prefer the to use the one without the teeth and then use a claw for anything it doesn't fit on. Just a tip in case you were actually looking to buy one of these