Reddit mentions of BIG RED T43002A Torin Steel Jack Stands: Double Locking, 3 Ton (6,000 lb) Capacity, Red, 1 Pair

From what I've heard, you don't actually need to take your wheels off to dip. If you don't know what tools you'll need to do it, then you probably should go this route.

However if you still want to get some good tools to learn how to work on your car, here's what you'll need:

Floor jack this is the Harbor Freight one. It can be found in stores for as low as $70 depending on coupons. It's actually a pretty decent jack. Its very low and it lifts well. It's pretty good quality too, just very heavy. If you're not in the states/near a HF, do some research on a decent one as you don't want to drop your car on anyone/anything.

Jack stands you'll need four if you want to take all your wheels off at once. I don't have these stands and I don't know anything about them so do your research on some good ones (they don't have to be very expensive) and make sure to get some that will support your vehicles weight. Remember, be safe.

Breaker bar this will help you get the leverage you need to break your lug nuts loose. It's a very smart idea to properly torque your lug nuts back down when you put your wheels back on so they don't fall off or you don't snap a stud. Here's a combo kit with a torque wrench and that same breaker bar I have a few Tekton brand tools and I'm very pleased with them. They are a fantastic budget option that isn't junk. I would definitely buy from them again (and I'm a bit of a tool snob)

Lug nut sockets this is a generic kit that I have no experience with. You'll need a socket to fit on your breaker bar and torque wrench. This is a set with multiple sizes, you only need one size for your car so if you want to save some money, figure out what size your lug nuts are and just get one socket. The ones in this kit and some you'll find elsewhere are coated in a plastic sleeve to prevent scratching on your wheels.

Gloves Gloves aren't necessary but some people like them to keep from getting their hands super dirty. You can get as cheap or as expensive as you like with gloves. These seem to be popular. If you do go to HF to buy a floor jack, I like their heavy duty black nitrile gloves. They're disposable and very strong.

This should be all you need to get started with changing tires and whatnot. I'm on mobile so sorry for the inevitable typo. Good luck with your wheels and don't forget to post pictures on the finished product. I'll link some more tools below this if you'd like to build of a kit to do basic maintenance like changing your oil, etc...

Socket set This is a very good place to start with sockets. I linked a 1/4 drive and 3/8 combo set. The smaller 1/4 inch drive sockets are great for small places and will be fine for a lot of your car. The 3/8 inch drive set is good for larger fasteners or things that are a bit tighter. If you were only going to get one, I'd get the 3/8 drive. Alternatively if you want something a little bit better, GearWrench makes very good sockets and ratchets for a good price as well (more than Tekton but way less than "professional" tool truck brands)

Oil drain pan Doing an oil change is a great way to do maintenance on your car and get started before you do bigger things. You'll need to drain the old oil somewhere so a pan like this is perfect. You don't need anything too fancy. I think I got mine from my local auto parts store for ~$10.

Screwdrivers There's a million different options for these. My personal favorites are the Wera Kraftform screwdrivers they are super comfortable and they have a special non slip tip that is amazing. I don't want to use any other screwdriver ever after this. (They're on sale now too!! They're usually about ~$10 more than this. I almost want to get an other set just because)

Pliers These are great pliers at a good price. Keep them clean and they should last a long time. I'm very happy with mine.

I can't think of much more right now. You'll know when you need something else. This also depends on what kind of car you have. Jeeps for example, use a lot of torx fasteners so you'd need torx sockets for a lot of stuff. Just make sure you watch a lot of videos on how to do things and make sure you're comfortable doing whatever it is you're doing. The last thing you want to do is damage you or your car.

Don't be cheap with raising your car up, seriously. What's saving 30 bucks when your life is at stake? 25 bucks at amazon for a pair of 3 ton stands.

Please do not use blocks of wood.

I suggest u amazon impact sockets (mm not sae) and deep impact sockets both in 1/2 instead of normal ones (I wish I did this =/ ). also buy a pipe that will go over the breaker bar to extend it. Unless workout like MMA fighter, u will need it

I also have this.

And a socket to drill adapter, makes life really easy. Even to just use scissor jack with.

Not trying to be a jerk, but buy some jack stands. They're cheap and wayyyyy safer than keeping a vehicle on a jack. Jack vehicle up, insert jack stand, put vehicle down on jack stand. Fucker isn't going to move after that! (DON'T use the jack stand as shown in the amazon pictures, that's a great way to fuck up your body work. Put it under a frame member!)

Or, like my old truck, you could just reach in over the front tire to replace the oil filter, and combined with a fumoto valve on the drain plug you have a no tools oil change! (Unless a drain pan counts as a tool, of course.)

These are my most used tools for working on cars.


Trim tool - For molding and trim and windows, this is a must

http://www.amazon.com/No-Scratch-Tools-Removing-Fastener-Molding/dp/B000LNBLTK/ref=sr_1_4?ie=UTF8&qid=1395692539&sr=8-4&keywords=bmw+tools


Tool Set - Here is your best bet for general tools. Start with this basic tool kit.

http://www.amazon.com/Stanley-96-011-170-piece-Mechanics-Tool/dp/B002VXN6TG/ref=sr_1_4?ie=UTF8&qid=1395692665&sr=8-4&keywords=automotive+tool+kit

Code reader - then this so you can read check engine codes and properly fix the issue. This is a tool that will save you so much money.

http://www.amazon.com/Autel-MaxiScan-MS300-Diagnostic-Vehicles/dp/B001LHVOVK/ref=sr_1_1?ie=UTF8&qid=1395692484&sr=8-1&keywords=obd+2+scanner

Jacks stands - Not so important but pick up some cheap jack stands

http://www.amazon.com/Torin-T43002A-Double-Locking-Jack/dp/B00026Z3E0/ref=sr_1_1?ie=UTF8&qid=1395692837&sr=8-1&keywords=jack+stands

Light - And a very helpful thing is a good light

http://www.amazon.com/Bayco-SL-1002-Halogen-Project-Light/dp/B000FW7UH4/ref=sr_1_2?ie=UTF8&qid=1395692872&sr=8-2&keywords=work+lights

I prefer ones with a safety lock. I read a story here about some guy who knocked the release bar and crushed himself.

http://www.amazon.com/Torin-T43002A-Double-Locking-Jack/dp/B00026Z3E0/ref=sr_1_1?ie=UTF8&qid=1382276522&sr=8-1&keywords=jack+stands

harbor freight has 3 ton jack stand for $21 a pair right now. I would have bought them but their locking mechanism is shit imo. I got these instead still waiting for them to be delivered https://www.amazon.com/Torin-T43002A-Double-Locking-Stands/dp/B00026Z3E0. Going to put concrete blocks under the tires too when I lift the car up. Just bought some nice solid rubber chocks at Harbor freight for like $7.99 each, way better than the flo tools crap one's. Then went next store to advance auto parts and bought a 2-ton jack that was on sale for $24.99, that I have yet to open.

http://www.amazon.com/RhinoGear-11930-Hugger-Wheel-Chock/dp/B000BQYH6Q


http://www.amazon.com/Torin-T43002A-Double-Locking-Jack/dp/B00026Z3E0

Cheaper than a funeral!