Reddit mentions of Elmer's E7010 Carpenter's Wood Glue, Interior, 8 Ounces

As someone working through this but a few years ahead of you, I'll pass along the list of stuff I've bought and/or wish to buy...

Hand Tools

1. You say you have screwdrivers, but ifs worthwhile to have a full complement of them. You might consider getting a hand tool set like this one. Also, diagonals. Can't stress that enough. Eventually, you might upgrade a lot of these, but it'll get you started.
   
   
2. Ratcheting wrenches, along these lines. Conventional wrenches are functional, but these are much more so.
   
   
3. Ratcheting hex key set. In fact, this one looks good. If you have any Ikea furniture in your future, these will be worth their weight in guld.
   
   
4. Maybe a vise. That particular vice is mid-priced, but you can find well-reviewed vises at just about any price point.
   
   
5. A good range of sand paper grits: 80, 100, 120, 150, 180. You might also pick up a sanding sponge.
   
   Power Tools
   
   
6. A Dremel
   
   
7. Maybe an electric circular saw or a jigsaw. I really don't know which I'd prioritize, but you should probably have at least one of them.
   
   
8. If there's money left over in your budget, I'd suggest a random orbit sander.
   
   
9. A drill press
   
   Also, there are fluids to consider
   
   
10. Simple Green
    
    
11. Penetrating oil
    
    
12. Wood Glue
    
    
13. Mineral Spirits
    
    
14. Linseed Oil
    
    Of these, I'd focus on the hand tools, fluids, and the Dremel. You can always ask someone to buy you a saw for Christmas. If you have these things on hand, there probably won't be a job come along that you can't handle at some basic level. I'm assuming you don't need yard grooming tools, because that's an entirely different list.

Not sure if its 1 or 2, but I use this stuff:

After letting it set for a few days, I warm it for a few seconds with a blow dryer to make it a little easier to peel in one move.

Let me start by saying that this would be the bare minimum. This is assuming that you have all the experience to use these tools effectively as someone who has the appropriate skill and knows to do things like not bear down on a saw when cutting, keeping everything square, how to mill boards by hand, how to not kill sandpaper in a few strokes, how to tune and sharpen a hand plane, ETC.


2x$8.69Vise grips Two vise grip clamps. Clamps can be universally adjusted and clamped in almost any direction with some quick thinking. One is never enough.


$9.99Cheap set of chisels Everyone needs a chisel. These will be made from a milder steel, but it's better than nothing.


$22.00Generic ryoba saw A ryoba saw will double for crosscuts and ripcuts. They go as far as you can take them provided you treat them right.


$18.62Bench Plane You need to be able to take down material in terms of thickness. A simple bench plane will due for now.


$20.61Block Plane A block plane will help slightly with end grain smoothing where the bench plane cannot.


$3.47Bundled Sandpaper You need to finish your products somehow. I would get a generic bundle of sandpaper and use it sparingly and tenderly.


$12.85Square Keeping things square is vital.


$6.79Mallet Hammering your chisels is going to be very important since you cannot use a 2x4 reliably.


$3.47Wood Glue Need to be able to glue things together.


$11.80A set of card scrapers Remove material smoother and faster. You don't want to waste sandpaper if you don't have to, and these are quite versatile.


$8.06A bastard file A bastard file will do for now when it comes to heavier shaping and sharpening your card scrapers.


$15.92A small drill viseKeeping something secure in place is very important. A small vise will accommodate small and narrow pieces of lumber and can be bolted to a bench.


$3.97Assorted finer sandpapers You need something to keep your chisels constantly sharp, especially when it is such a mild steel as a set of 9.99 chisels.


$15.59Wipe on polyurethane You need to be able to finish your products somehow.


Comes to $170.52 I would use the rest to make a bench and two sawhorses out of some 2x4's.