Reddit mentions of Fallkniven F1, Thermorun Handle, Plain, Zytel Sheath

I'd go with this thing: http://www.amazon.com/Pilot-Survival-Thermorun-Handle-Sheath/dp/B001JA9Y66/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1333752535&sr=1-1

The Fallkniven F1 is made of insanely durable VG10 steel and is used worldwide as a survival knife for military forces. It's a bit outside of the $100 range, but this one's on sale. Just look around, I'm sure you'll find the reviews to be unanimously positive.

That is a very good range, great price point for awesome hunting knives.

Here’s a couple all purpose bushcraft/outdoors knives:

The Benchmade Buschraft: Micarta scales and a very nice leather sheath put it at $200 even. Benchmade is made in the US and is very well known for their high quality and their great warranties. I just bought a Crooked River and am enamored by it.

https://www.amazon.com/Benchmade-162-Bushcrafter-Drop-Point/dp/B00B0E1MB6/ref=mp_s_a_1_1?ie=UTF8&qid=1549089167&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=benchmade%2Bbushcraft&dpPl=1&dpID=41uGBLFBQNL&ref=plSrch&th=1&psc=1

Next up is the Fallkniven F1. It’s got a composite rubber handle but is still full tang. Made out of VG10 which means high rust resistance, great for bloodwork in the cold when you don’t have a lot of time to clean it. This brand is out of Sweden and those dudes know their outdoors gear. I could go on and on about them but there’s not much more needed to be said. At $115 you’re getting an incredible knife for a hell of a price.

https://www.amazon.com/Fallkniven-F1-Thermorun-Handle-Sheath/dp/B001JA9Y66/ref=mp_s_a_1_1?ie=UTF8&qid=1549089232&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=fallkniven&dpPl=1&dpID=41BlkNY8VfL&ref=plSrch

Now look at the Esee 6P, this is a good example of everything a knife should be and no more. Its 1095 high carbon steel so the implication would be to keep it cleaned and oiled, but there is a DLC (diamond like carbon coating) so it will keep the rust at bay until it wears off over time. $116 is a modest price, especially for the size of this particular knife.

https://www.amazon.com/ESEE-Desert-Molded-Polymer-Sheath/dp/B0049TYBL2/ref=pd_aw_sim_468_1/147-9912666-5096041?_encoding=UTF8&pd_rd_i=B0049TYBL2&pd_rd_r=35b4fb85-26b5-11e9-a2ee-7323802ef2ad&pd_rd_w=EV1gz&pd_rd_wg=WIYnq&pf_rd_p=469620d9-3e90-496d-9dc8-b19f900ba5fe&pf_rd_r=VEHBMYRN110K86ZGZE9G&psc=1&refRID=VEHBMYRN110K86ZGZE9G

That being said I don’t know a great deal of “brand name” filet knives but what I can assure you of is that there is no more a reliable product than a Morakniv. They literally have a knife for every job, and they’re all incredibly robust and utilitarian. Don’t let the low price point fool you, they are worth much more than the company charges. These are made of 12c27n sandvik steel, again in Sweden. The steel is good stuff, nothing glamorous but still a step above 440c. They have awesome belt clips that are just as simple as can be and I couldn’t personally suggest a whole line of knives other than Morakniv.

https://www.amazon.com/Morakniv-Fishing-Comfort-Stainless-6-1-Inch/dp/B00EAL1HI4/ref=mp_s_a_1_2?ie=UTF8&qid=1549089826&sr=8-2&pi=AC_SX236_SY340_QL65&keywords=mora%2Bfillet%2Bknife&dpPl=1&dpID=31IMwXb73cL&ref=plSrch&th=1&psc=1

$150 is plenty of budget for a good knife. This one is just slightly over that budget but will last you the rest of your life. It's kind of my dream survival knife.

The Fallkniven F1 is very popular as well and right in your price range.

Currently I use this knife which is also very good.

If you want to go a little less expensive still, Becker makes some good ones such as the Bk16. I know the Becker doesn't look anything like "hand made", but I have the BK2- I used paint remover to take the black coating off the blade, replaced the plastic handles with micarta and stained it to look more like wood, and built a leather sheath for it. It's a beautiful knife now. Too bad it's so goddamn heavy.

You could also go with something like the Mora bushcraft. I have that one also, very decent knife.

You could even just get a regular Mora or a Condor bushlore which are even more economical options.

If you want something that's high quality and will last forever, a great option is a Benchmade Saddle Mountain Skinner The S30V steel is uses is great for keeping an edge of a long time, and it's backed by a lifetime warranty. It's also made in the US, which is always nice.

Another great option for very tough, no-frills knives is a Swedish company known as Fallkniven. They make fantastic hunting and survival knives. Their A1 model is their most well-known, but I prefer the smaller F1 series It's a fair bit lighter and easier to carry.

It's definitely enough for a nice knife, though you might want to go a bit higher for a great knife. The KaBar BK2 is actually designed with things like batoning (hammering the knife through wood as a kind of faux hatchet using another piece of wood against the blade of the knife as the hammer itself) or chopping. It's a bit over $60, currently available for $69 to be precise, but as long as you don't flat out abuse it (prying heavy things, for example) it'll serve you well and quite possibly for the rest of your natural life.

At a lower price, you can get the Condor Bushlore, which at $35 is a perfectly valid choice that will serve you well indeed.

For an even lower price yet, the Mora Heavy Companion is from one of those few cheaper knife companies that does incredible work. I wouldn't baton with it, honestly, but even if you did it'd probably hold up just fine.

At a more expensive range, the Ontario Rat-5 is an amazing bushcraft knife. The Fallkniven Pilot Survival Knife is also an amazing knife. The Benchmade Bone Collector is spectacular knife made in D2 tool steel, one of the better steels available at that price. Another amazing knife is the Spyderco Bushcraft made in O1 tool steel. Finally, the Benchmade 162 is a pretty amazing knife.

One thing you'll notice about all of these knives with the exception of the Pilot Survival knife and the BM 162 is that they're all carbon steel knives. Carbon steel is a lot tougher than stainless (with a few very, very rare exceptions I'd never trust a long knife to be stainless steel) with the trade off of being a lot more of a hassle to take care of, since it needs to be regularly cleaned and oiled.

If you want a fire starter, carry a magnesium fire starter. With the carbon steel knives, you can probably strike it against the back of the blade to create the sparks you'll want and if not (like with some of the coated ones) you'll be carrying the striker anyway.

For sharpening, you'll want to get a decent sharpening setup and start stropping. A couple of easy sharpening systems would be the superior Spyderco Sharpermaker (usually available on Amazon around the $50 mark) or the Lansky Sharpening system which while cheaper isn't as good. You could take the time to learn how to free hand it, but most casual users don't care that much because it takes a long time to get proficient at freehand sharpening. Stropping is running the blade against something like smooth leather (usually smooth leather, actually) to remove burrs along the blade of a knife made by use and sharpening and the restore a blade to a better edge without removing metal. Stropping allows for a level of sharpness unachievable by sharpening alone and extends a knife's lifetime by allowing sharpness to be achieved for longer without removing metal from the blade. To learn how to strop, watch videos on YouTube or check out guides from the sidebar of /r/knives.

Finally, if you want a whistle, just carry a whistle. If you want a mirror for signaling, carry a small signaling mirror or mirror polish the knife you buy (a process where you sand the blade with increasing grit level sandpaper until it shines like the sun and you can see yourself in the blade).

If you have any more questions, feel free to ask.

Thank you for your service.

Hard to beat a Mora for the price though, right?

Could you provide your favorites at different prices? I don't know much about what real world experienced people would use.

I use a Fallkniven but I'm a total keyboard commando and I just like knives so I don't know much. I hear esee5 is nice too.

Well, the Fallkniven F1 could definitely fit the bill.

Excellent hiking/camping knife, convex grind, comfortable handle and great quality overall.

I've got that one. Great knife. I like using the flint to light my BBQ. The Fallkniven F1 is my favourite though. Steel is laminated, about twice as thick, and has a full convex grind which I think is better for batoning.

The Fallkniven F1 is a very nice no-frills knife if you like stainless. It's the survival knife of choice for the Swedish air force. Pick up a 5$ pack of variable high-grit wet/dry sandpaper from your auto parts store for sharpening convex edges if you get one.

I personally own a fallkniven f1 http://www.amazon.com/gp/aw/d/B001JA9Y66 It has been a great knife for me over the past few years. The blade is nice and thick, runs full tang and carries a wicked sharp full convex edge. Its made of a laminated steel using a vg 10 core and another stronger steel for the side of the blade. All in all I have used it for whittling, batoning, hammering and even some minor chopping. I highly recommend it.

For ~$30, get one of the "high-end" Moras. I have this one, it's very sharp, very comfortable, nice and light, and great for camp chores like food prep, whittling, cutting cord, etc.
For ~$120-$150, get a Fallkniven. The F1 model is smaller and cheaper, the S1 is a bit bigger, and I think the A1 is the biggest. They're fantastic; great steel, thick but not too thick blade, exposed tang, unbreakable handle. I took my Mora and my Fallkniven camping with me a few weekends ago. The Fallkniven was used to baton through dead wood to make firewood, the Mora was used for cooking and lighter chores. Neither one shows any wear, though they were both used vigorously. And they're both still sharp as hell.
Those are the two that I can personally recommend, and frankly I'm surprised that Fallkniven hasn't come up more here if you're willing to spend upwards of $100 on a knife. If you need to stick to a budget, then a Mora will never let you down. The ESEEs also have a great reputation and people around here love them, so you can't go wrong with those either, I just prefer the style of Fallkniven more than ESEE. One thing that everyone will agree on is to stay away from Gerber if you want a good, dependable blade.

My comment was written with most everyday people in mind. They're mostly sharpening bad 440C kitchen knives and don't want to spend a lot of money. Another big thing is that your average person in the kitchen doesn't even know just how sharp a knife can get. The average guy is usually okay with a good working edge. I was recommending the honing rod and the Lansky system because they're inexpensive, easy-to-use, and they last a long time. Plus, most people are never even going to need a Lansky. That's already more advanced than most want to get.

If you have good knives though, everything changes. If you're a knife guy, then yeah absolutely you need to have a more sophisticated sharpening system.

We're both knife guys, so you'll probably agree that it all really depends on which knife you're using.

There are so many factors that go into it.

How thick is the knife?
What's the blade length/shape?
What's the steel?
What's the grind? Convex? Hollow? Full-Flat Grind? Scandi? Sabre?
What's the angle on that grind?
What type of knife is this?
What kind of edge do I want to put on it?

I personally just put a convex edge on most of my knives, so all I really use is a strop and a handful of compounds. For everything else I just use an Apex Edge Pro.

Another option to consider might be the Cold Steel Master Hunter. Or, if you are willing to stretch the budget some, the Fallkniven F1 is a solid choice, well loved in the bushcraft world.

125 on amazon