#142 in Sports & Outdoors
Use arrows to jump to the previous/next product

Reddit mentions of Lyman 7777800 Case Prep Multi Tool, Multiple

Sentiment score: 11
Reddit mentions: 19

We found 19 Reddit mentions of Lyman 7777800 Case Prep Multi Tool, Multiple. Here are the top ones.

Lyman 7777800 Case Prep Multi Tool, Multiple
Buying options
View on Amazon.com
or
    Features:
  • Everything needed for case prep in one versatile tool
  • Unique handle design unthreads to store all parts
  • Tools Included: inside and outside deburring tools, large and small primer pocket cleaners, and large and small primer pocket reamers
  • Convenient and compact for easy storage
Specs:
ColorMultiple
Height4.5669291292 Inches
Length3.8976377913 Inches
Number of items1
Release dateDecember 2011
Size1-Pack
Weight0.01 Pounds
Width0.4724409444 Inches

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Found 19 comments on Lyman 7777800 Case Prep Multi Tool, Multiple:

u/random157294683 · 8 pointsr/reloading

Frankford Arsenal powder trickler. Compact, nice heavy base for stability, even flow. I also have an RCBS trickler and hate it. It's not as stable and the dispensing arm thingy is a weird two piece design that never seem to flow well for me.
GemPro 250 digital scale. Do not waste your money on cheaper options. I don't have experience with the chargemaster type of scale. I like to do things manually.
Redding Imperial Sizing Die Wax. Best stuff there is. Works amazingly well. I also keep a lanolin/alcohol spray lube around for doing large batch work, but Imperial Sizing Wax does a better job.
Hornady Bullet Comparator set. You don't mention what cartridges you're reloading. THIS KIT DOES NOT INCLUDE 6.5mm. There's a 14 insert kit that includes more, or you can buy just the few inserts you need.
Frankford Arsenal bullet puller. I buy what's cheap. These don't last forever. All the hammering eventually cracks the plastic. I've tried several brands and they all break eventually. I usually keep two on hand.


So that covers what you already know you need. Here are some more recommendations.

Hornady 9th Edition. I use this more than all my other manuals combined. I shoot a lot of Hornady bullets, though. If you already have a favorite bullet brand, you should buy that brand's manual.

Lyman Shooters Check Weights. I use these every single time I reload. I like knowing that my scale isn't lying to me. Digital scales can be finicky sometimes! These are worth every penny.

Hornady Headspace Comparator set. This is a lot like the bullet comparator set, except that it measure to the shoulder of the case instead of the ogive of the bullet. If you're planning on monitoring the amount you're bumping your shoulders during resizing, this is what you need.

Lyman Case Prep Multi-Tool. The chamfer tool that came with your kit will do the job, but this Lyman multi tool is my preferred method. It also comes with primer pocket scrapers that will be useful, and primer pocket reamers you should throw away and never use.

RCBS Uniflow Powder Baffle. This will help your uniflow powder measure throw more consistent charges.

RCBS Advanced Powder Measure Stand. If you're going to do a permanent installation of your powder measure on your bench, you will want this stand. Its price is absurd, but it's a great stand.

RCBS Universal case loading block. Your kit came with one, but you need at least one more.

What is your plan for cleaning brass? Wet tumbling with steel pins is the way to go. I have the Frankford Arsenal unit. It's huge and noisy. If I had it to do over I would purchase the dual drum tumbler from Harbor Freight and buy steel pins from Amazon.

Redding dies don't come with shellholders. Did you remember to get one?

What is your plan for case trimming? You don't mention what you're reloading. The cheapest option, which is actually my preferred method, is the Lee case length gauge and shellholders with their cutter and lock studs.

There are some additional case prep tools, but they would depend on what you're doing. If you are dealing with brass that has military crimps, you'll need tools to deal with that. There are primer pocket brushes, primer pocket uniformers, flash hole deburring tools, and a million other little things.

That's all that's coming to mind right now. I'm sure I missed some stuff.

u/Oberoni · 6 pointsr/reloading

>Seating Die:


Seating dies push the bullet down into the case and for pistol cases remove the belling done by the expanding die. Many seating dies can optionally apply a crimp, though some people dislike this because the bullet is still being pushed downward as the crimp is applied. Some seating dies come with multiple or reversible seating stems, this allow you to seat different profiled bullets(FMJ/Ball, Spitzer, VLD, etc) bullets without damaging them. 



>Crimp Die:


Crimping dies push the case mouth into the jacket/lead of the bullet. This helps secure the bullet from ‘walking’ out of the case under recoil. There are taper crimps, often used in semi-auto oriented rounds that start from the base of the bullet and slowly narrow as it moves upwards towards the bullet and roll crimps which fold the very edge of the case mouth inwards. Roll crimps are often used on revolver cartridges like 44mag or 38spl and rifle rounds. Taper crimps are used on things like 9mm. 



>Factory Crimp Die:


A Factory Crimp Die or FCD is kind of like a fail safe. If a bullet is slightly too large or that particular round didn’t get seated far enough a FCD will correct the mistake. It doesn’t make an unsafe round(say from a bad powder charge) safe to shoot, but it will help make sure all your rounds chamber. Since many people don’t like to seat and crimp on the same step, they use their FCD as their only crimp die. 



>Powder Check Die:


A powder check die has a small free floating ram in the middle that drops into the case. It provides an easy way to spot check powder levels based on how high it raises. Some powder check dies will lock the press when they detect an over/under charge. In practice the low powder volume and wide case can make powder check dies unreliable for pistol loads. If you do use a powder check die you shouldn’t let it lull you into a sense of false security, you should still be visually checking your charges. 





>Powder Throwers:


This isn’t a “die” so much, but many do fit directly onto your press. They dispense or ‘throw’ a specific charge of powder every time they are activated. Do to the nature of how they work how accurate they are depends on the type of powder you are using. Flake powders and long extruded powders measure with much more variation than ball or short stick powders. Throwers come in three flavors; Case activated, manual, and press activated. Press activated throwers dispense powder anytime the press ram is moved up. This is fine for a single stage press, but on a progressive press it is just a big mess waiting to happen. A manual powder thrower has a small handle you actuate anytime you want to dispense powder. These are great, as long as you don’t forget to pull the lever for every case. Case activated throwers only dispense powder when a case goes into them. These are great, especially on progressive presses. 




>Bullet Feeding Die:


Bullet feeding dies place a bullet into the belled/charged case. With a bullet feed die you don’t need to manually place a bullet for each round. While the dies themselves are 20-40 dollars they won’t always save you time without an automatic bullet feeder hopper which can cost several hundred dollars. Only useful on progressive presses.



>Case Feed:


Again this isn’t technically a die, but it attaches to your progressive press and places a new case into your shell plate automatically. These are specific to your press and usually cost several hundred dollars.


Many powder throwers can be given a PTX add on that will expand as well as charge the case. On a progressive or turret press this saves you a spot on your press and on a single stage it saves you from having to do a separate belling step. 




Shell Plates


Most die sets come with a shell holder of a matching caliber to keep the brass in the press. However if you are buying your dies piecemeal you’ll need to get a shell holder set. Progressive presses use “shell plates” which hold multiple rounds at a time. These can be proprietary and will need to be purchased separate from your dies. 



Lee shell holder set $27.99


Hornady LnL AP shell plate 9mm $24.64




Case Trimmer


When a round is fired the case is under such extreme pressure that the brass actually acts like a plastic. It expands outwards in all directions until the chamber stops it. In front of the round however there is nothing to stop the brass from flowing. Because of this the brass grows in length. After a few firings the brass may be too long to fit in the chamber of a gun again. To combat this after sizing your brass(which further alters its dimensions) you measure it. If it is too long you need to cut some of that excess off with a case trimmer until it is the proper size again. This is primarily only a concern for rifle brass.




Case trimmers can be free hand, manual, and motorized. Free hand allows you to remove brass, but requires you to check with a case gauge often to ovoid over trimming. Manual trimmers allow you to set a certain length to cut to and do all rounds to that length rotating a small lever by hand. Motorized trimmers allow you to set a length and very quickly trim a large amount of cases. Some manual trimmers can have drills attached to make them faster. Not all motorized trimmers can handle multiple calibers.



Lee Zip Trim $21.99 and Lee Cutting Ball $9.99


Lyman Universal Trimmer $82.99


World’s Finest Trimmer .223 $75.95




Chamfer/Deburr tools



Chamfering removes a bit of metal from the inside lip of the case so that bullets seat more smoothly. Deburring is removing a small amount from the outside edge of the case mouth to help remove any burrs or flakes caused by chamfering. You don’t need to do either on pistol rounds as the case is belled wide enough to accept the bullet without it. 


You can also chamfer primer pockets. This will make seating easier and in the case of crimped primer pockets it is required. 


Again, there are manual and motorized options available. Motorized is worth it for anything above small batches.



Lee Chamfer Tool $3.99


Lyman Case Prep Multi Tool $22.99


Hornady Case Prep Trio $99.99



Bullet Puller


In the process of setting up your dies you’re going to make some dummy rounds. No primer, no powder, just case a bullet to dial in your case bell, seating depth, and crimp. You can just throw these rounds away. . . or you can get a bullet puller and recover your components. There are kinetic bullet pullers that work well with heavier bullets(125gr+ in my experience) and collet bullets that attach to your press. 



Frankfort Arsenal Kinetic Bullet Puller $17.76


Hornady Cam-lock Bullet Puller $31.56



u/ahorribleidea · 5 pointsr/reloading

I would recommend upgrading to a nice digital scale, it will make things easier.

Maybe get a few of these if you haven't yet thought about how you're going to store your loaded ammo.

I have that same tumbler, works great. I would also suggest a separator for afterwords. Some brass polish is nice too.

I think that kit comes with a hand trimmer, but I would recommend a larger one, your hands will thank you.

I went with a Lyman kit for my starter set, and while it's a lot more expensive than yours, I've been very pleased with it.

When you start doing 223 you'll also want a case length trimmer. This one works pretty well for me.

u/newyearyay · 5 pointsr/gundeals

This seems like a good deal to get the majority of what someone would need right off the bat to start reloading (but it doesnt come with a case trimmer....there are cheaper models out there) even so though you'll probably start to upgrade parts very quickly (if not immediately) from a better hand prep tool that would also allow you to remove military crimps as well as chamfur and deburr (and then maybe eventually to a prep centerif you start reloading a lot)

And so on, so it really depends if someone is going to jump in with both feet it may be cheaper for them to buy the parts seperately but if youre just looking to do a little casually or try it out this sounds totally worth it. It is addictive and personally im halfway through case prepping 4000 556 cases which isnt the easiest on a single stage press but will save me several hundred dollars over purchasing from the factory (as well as the ability to tune loads for each rifle)

There are reloading deals out there for materials, but press kits like this will save some people money but cost others 'more' (as they will probably upgrade certain things) still great to get into

u/thepyrodex · 4 pointsr/reloading

https://www.amazon.com/gp/aw/d/B004MCMCYE?psc=1&ref=yo_pop_mb_pd_title

The handle unscrews and all the pieces fit inside including the chamfer and deburring parts

u/dorkra · 3 pointsr/reloading

If you want the cheapest way to do it: Lyman case prep. You can put the individual tools into some sort of connecting nut and put it into a handdrill. Also includes tools for chamfer and deburring. Not the most efficient or consistent, and not fun for a large amount of brass. But cheap, and easy to use.

Removing the crimp and priming aren't really supposed to be done in the same step. I prefer to do my rifle priming off press, so I got something like this: Lee ergo. Each manufacturer has their own priming tool, just remember for the lee ones, you need to buy holders for various calibers. And no, you can't use the press case holder for the primer (cue video of me cursing before reading directions).

u/InformationHorder · 3 pointsr/reloading

Opinions will vary wildly, but if you're going to start and really aren't sure if you'll stick with it, get a quality single stage press. Scour Craigslist and keep an eye out for deals on Amazon. If you don't stick with it a quality single stage will be easiest to get most of your money back on. If you like it, a quality single stage will always come in handy when you make special pet loads for accuracy, even if you upgrade to a progressive some day.

If you're fairly certain you're going to stick with it, and plan to load for bulk, a turret/progressive press hybrid like the Lee Classic Turret press where you can take the indexing rod out and use it as a single stage if need be might be a good middle of the road choice. Opinions on progressive presses vary and usually generate a lot of discussion, but for your current situation it's a great way to check off a lot of boxes, and it runs only slightly more than Lee's single stage.

As far as cheapest route without buying crap, not everything that's cheap is crap, but there are a few plces where not skimping gets you way more value. Because of this, you are much better off getting stuff separately to get better value. Buy the dies from whoever you want, .223 and 5.56 are the same set, and quality level is up to you. For most plinking purposes Lee is just fine, but if you're loading for a bolt action the Hornady or Redding dies can get you more accuracy for a lot more (relatively speaking) money. Then buy a good digital scale, a good chamfer and deburring tool (not that shitty Lee abomination. Seriously, fuck that thing. Your hands will thank you), a cutter (plus associated gauge and shell holder for a drill), a powder funnel, a puller for when you dick it up, and a nice set of calipers and you're off to a solid start for under $350.

u/Cemeterystoneman · 3 pointsr/gundeals

This totally will be accurate enough (I don't have this particular model) but it weighs each load so you can see what you're charging before you actually do - but can potentially slow you down as it weighs each load while dispensing (still worth it though and faster than a balance scale)

Also if you're looking for tips - if you're shooting 9mm use a 147gr bullet if you can or at least anything heavier than 115gr, the recoil will be more "back and towards you" rather than upwards - x-treme bullets are pretty great and one of the more inexpensive options but if you can find pulled bullets (not necessarily ideal but good enough for practice at least) they will be even cheaper - ammoseek has parameters you can set for reloading supplies. You'll also need a hand priming tool (wait for a sale, it does come down in price) - or a table top version, and a press of some kind (don't be afraid to look for used to save money, I'm rocking an RCBS thats older than I am but works great and am currently doing 4000 556 loads through it. - also consider what kind of brass you're going to be reloading, if its military crimped you're going to need either a primer pocket swagger or a cutter to chamfer the primer pocket. There are also case prep machines that are electric and have these tools as well as others especially if you're going to be doing a lot of rifle rounds. Buy a reloading manual thats encompassing, you can check used bookstores - you can also find load data online but that can be hit or miss.

You'll find you won't save any money but will be able to shoot more for the same amount - more bang for your buck.

u/rm-minus-r · 2 pointsr/reloading

Chamfer the inside of the case opening and your bullets will sit in the case without any issue. You can use something like this tool. Takes just a second or two to do it.

u/pedee · 2 pointsr/reloading

I just started to and you need to chamfer and deburring tool.

This one is the best IMO http://www.amazon.com/Lyman-Case-Prep-Multi-Tool/dp/B004MCMCYE/ref=sr_1_2?ie=UTF8&qid=1422086949&sr=8-2&keywords=lyman+case+prep&pebp=1422086951922&peasin=B004MCMCYE

If you are reloading 556 brass with a crimp around the primer you may also want this tool that also fits into the above layman tool. http://www.amazon.com/RCBS-Trim-Military-Crimp-Remover-SM/dp/B0063IDE6A/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1422087101&sr=1-1&keywords=rcbs+crimp+remover&pebp=1422087104120&peasin=B0063IDE6A

You can get the crimp off with a razor or the first tool but its easy to put this in the drill chuck and crank them out by the numbers.

u/Croc_Warrior · 2 pointsr/reloading

I use one of these because The individual bits will all fit on my power drill. Makes removing the crimp or bur from trimming simple and quick.

https://www.amazon.com/Lyman-7777800-Case-Prep-Multi/dp/B004MCMCYE

u/crab-bait · 2 pointsr/reloading

•Jennings JSVG-20 Compact Digital Jewelry Scale.

If you can, save for an RCBS chargemaster

•RCBS Uniflow Powder Measure

Again - get a chargemaster


•Reloading Manual is this manual relevant to reloading for M1 Garand?

Your link doesn't take me anywhere for the manual - I like Nosler and Hornady manuals. I do not like the Barnes manual. I do like the Barnes bullets which is the only reason I have the manual


•RCBS 90200 Hand Priming Tool

I prefer Lyman's hand priming too. I like Lee's better than RCBS's but the Lyman works best for me


•RCBS Fold-Up Hex Key Set do I really need this?

You will need an allen wrench set but you can get one at an auto parts store or hardware store. I like the ones that have the ball end to allow you to use at an angle


•RCBS Universal Case Loading Block

Get two


•RCBS Case Lube Kit, lube, pad & brushes

I like Hornady Unique case lube in the tub but it's all I've ever used. It doesn't take much and one tub lasts forever.


•RCBS Powder Funnel, .22-.50 Caliber

Yes - get this


•[Lyman Case Prep Multi Tool](https://www.amazon.com/dp/B004MCMCYE/ref=cm_sw_r_cp_api_h71FAbFPYHG1N

I don't care for this tool. Lyman makes individual tools called primer pocket uniformer (used after every firing) and flash hole cleaner (only needs to be used once)


•RCBS .30-06 Springfield SB T/C Die Set

Yup - Die set box tells you which shell holder you need - I like this


•RCBS 9203 #3 Shell Holder got this right?

Yup


•EAGems Digital Caliper, in SAE/Metric, 6 inch/150mm. Again, would like digital, opinions on accuracy?

Whatever caliper you can find at a reasonable price - digital is much quicker for me to read


•RCBS 9440 Bullet Puller without Collet

I have a cheap one from Cabelas that came with three different collets


•[RCBS 30/7.35 Bullet Puller Collet] - see above


•Frankford Arsenal Quick-n-EZ Case Tumbler

I have a friend that bought three different ones as they all shook themselves apart - I bought a Dillon with a lifetime warranty


•Frankford Arsenal Quick-n-EZ Case Tumbler
•Frankford Arsenal 887335 Arsenal Brass Polish. 8 Oz. - I've had good luck with fiberglass boat polish poured right in to the walnut shell media

Good luck and have fun

u/bdsmchs · 1 pointr/reloading

Lyman case prep multi-tool: https://amzn.com/B004MCMCYE

Lets you chamfer and debur using a drill or powered screwdriver. It comes with adapters that are threaded 8-32 so you can put ANY cleaning rod attachment in a drill, or other tools like primer pocket uniformers, etc.

Best $20 I never spent (Was a gift. Would buy again though).

u/Draskuul · 1 pointr/reloading

It won't include a case gauge, really a complete round gauge. You should own one for every caliber you reload. Example: https://www.amazon.com/Lyman-Reloading-Length-Headspace-Gauge/dp/B001RI7A66/ref=sr_1_1?ie=UTF8&qid=1479962029&sr=8-1&keywords=lyman+223+gauge

Wilson and Dillon also make cartridge gauges. You can use them to confirm your cases are within spec (both shape/shoulder and length) and check loaded rounds. Always gauge at least your first few rounds each session and randomly pick a few as you go.


Note that for the Lee kit to trim brass you need Quick Trim Dies. Example: https://www.amazon.com/Lee-Precision-223-Remington-Quick/dp/B00NEQW1T0/ref=sr_1_1?ie=UTF8&qid=1479962154&sr=8-1&keywords=lee+223+trim+die


The first time I got the same kit I screwed up and bought what I thought was the necessary components for trimming. It turns out it was a shell holder and spindle piece for a different type of trimmer.


You should really get a deburr/chamfer tool for brass. The thing that comes with the Lee kit is completely worthless. Lyman makes a good one: https://www.amazon.com/Lyman-Case-Prep-Multi-Tool/dp/B004MCMCYE/ref=sr_1_1?ie=UTF8&qid=1479962275&sr=8-1&keywords=lyman+case+prep+tool


Personally I hate balance scales. This is a good electronic replacement. You'll want to use the powder pan that comes with the Lee scale on it or buy another (large!) pan. https://www.amazon.com/Smart-Weigh-GEM20-Precision-Milligram/dp/B00ESHDGOI/ref=sr_1_2?ie=UTF8&qid=1479962410&sr=8-2&keywords=gemini+scale

Important: Note this scale has a large area for you to rest a pan on. There is another version of this that comes with a little pan. The pan is WAY too small for loading anything past 15 grains or so of most powders. The 'contact area' for the scale is also tiny, so to use another pan you have to stack it. The one I linked has a large contact surface you can put a good-sized scale on.

u/justarandomshooter · 1 pointr/reloading

It can be a pain, but it doesn't have to be. If you get this little tool or something similar it can really expedite things.

I take the small primer pocket reamer, chuck it into a hand drill and proceed to ream out 50 cases in less than five minutes.

u/Notorious_Dave · 1 pointr/reloading

This is my current plan, tell me what you think I should do different.

Press

Bullet puller

Scale

Dies

Caliper

Book

Tumbler

Media

Media Seperator


Case Prep Tool


Trimmer And also the needed shell holder