#125 in Automotive
Use arrows to jump to the previous/next product
Reddit mentions of Meguiar's X3002 Microfiber Wash Mitt – Super-Thick Reusable Wash Mitt for Ultimate Finish
Sentiment score: 7
Reddit mentions: 14
We found 14 Reddit mentions of Meguiar's X3002 Microfiber Wash Mitt – Super-Thick Reusable Wash Mitt for Ultimate Finish. Here are the top ones.
Buying options
View on Amazon.comor
SUDSY WATER WASH: Our wash mitt is made of super-absorbent microfiber to carry more suds for faster, safer washingCLEAR COAT SAFE: Incredibly soft lint-free microfiber lifts and traps dirt and grime for a brilliant, swirl-free finishSHOW CAR FINISH: The ultimate wash mitt for show car perfect finishesREUSABLE: 8" x 10" hand wash mitt, machine washable and reusableWET OR DRY WASH: Can be used with traditional car wash soap or used dry with Meguiar's Quik Detailer Mist & Wipe A3316
Specs:
Color | White |
Height | 0.04 Inches |
Length | 10 Inches |
Number of items | 1 |
Size | 7 B(M) US |
Weight | 0.03968320716 Pounds |
Width | 8 Inches |
If you are planning to detail for the long term, I'd suggest investing in some bulk / concentrated products rather than the consumer-grade & Ultimate Meguiar's line.
I've tried to break down the supplies I'd suggest. Of course, don't just throw out your existing supplies. Use them up and then get the concentrates / bulk.
Note: There's no need to get everything in this list. Just get what you need. There's also cheaper alternatives to several of the products, and probably cheaper sites than those in my links. Some of the products I use because I want to support the manufacturer and/or because I trust the manufacturer. Use what you like and use it often. :)
 
Dust, light bug gut, and light bird bomb removal / lube
 
Heavy bug gut and bird bomb removal / light grime removal
 
Wheels & Tires
Cleaning
Drying
Dressing
Protecting
 
Body
Rinseless wash
Two bucket wash
Drying
Protecting
 
Glass
Cleaning
Drying
Protecting
 
Engine
 
Exhaust
 
Paint Prep
 
Paint Correction
I hose my bike down, then I use some nice clean soapy mitts from a bucket and get in between all the nooks and spokes, glass, etc. Then I hose it off again, wipe it down with microfiber hand towels and this towel.
I clay bar once a year and wax all the painted and glass surfaces. With my car I use an orbital to apply the wax but I'll wipe it off by hand.
Then I'll take it for a ride to let all the nooks and crannies air dry, but some people use compressed air. I don't use a power washer as I don't want to ruin bearings or any electrical stuff that isnt 101% weatherproof.
Total: $74.79
This kills the budget:
__
You could get away with using car wash soap for cleaning the wheels as long as your wheels aren't terrible. There's no point in getting a polisher if your paint is fine. You could get a wax instead of a sealant and that could save you money.
Chemical Guys All Clean +
Chemical Guys Citrus Wash & Gloss
Meguiar's DUB Wheel Cleaner - can be found over the counter
Wheel Woolies note: I got mine from Ammo but he doesn't have them listed up anymore
The wheel brush my dad found at a garage sale, but here is a similar product: Montana Boar's Hair Brush
Speed Master Jr. Detail Brush
Lug Nut Brush size 10
Foam Gun
Meguiar's Microfiber Wash Mitt
Grit Guard
Optimum No Rinse
Mango Breeze Microfiber
The medium pile microfiber is from Peak microfiber, a brand that is commonly found OTC
Dark Blue Plush Microfiber
Invisible Glass is sold everywhere
Hydrate Paint Moisturizer
Ignore the bit about sponges, get a wash mit like this one, it’s $4 and your clear-coat will thank you. Besides, in the long run it’ll be cheaper to treat your paint gently rather than pay for paint correction.
Edit: I’ve been living with a 2002 S80 T6 for a year now, so if you need any info regarding the P2 Volvos, hit me up :)
Let's start by saying car covers are a pain in the ass for daily use, the car has to be perfectly clean to prevent it from scratching and it just doesn't work that way unless the car is washed every couple of days.
Instead I'd just wash 1 or 2 times a week, and get a gallon-size of Meguiar's spray wax and Last Touch, because you know you'll be in a constant battle against certain elements, might as well stock up (and you save like 50% just buying in bulk this way). In fact I recommend checking out their entire detailer line because you're going to go through a lot of soaps, waxes, etc. Their gallon of shampoo plus for $20 is a great start. And you can find deals like 3-packs of their supreme shine towels for $6 as an amazon add-on item if you're a prime customer.
https://www.amazon.com/Meguiars-D11101-Shampoo-Plus-Gallon/dp/B000EZICII
https://www.amazon.com/Meguiars-X3002-Microfiber-Wash-Mitt/dp/B000RXKR6M/ref=sr_1_1?s=automotive&ie=UTF8&qid=1485457672&sr=1-1&keywords=meguiar%27s+microfiber+mitt
https://www.amazon.com/Meguiars-D15601-Synthetic-X-Press-Spray/dp/B005JPJMI2
https://www.amazon.com/Meguiars-D15501-Touch-Spray-Detailer/dp/B0006SH4NC/ref=sr_1_1?s=automotive&ie=UTF8&qid=1485453717&sr=1-1&keywords=last+touch
https://www.amazon.com/Meguiars-D12001-Glass-Cleaner-Concentrate/dp/B0006SH4KU/ref=sr_1_4?s=automotive&ie=UTF8&qid=1485457691&sr=1-4&keywords=meguiar%27s+glass+cleaner
https://www.amazon.com/Meguiars-Supreme-Shine-Microfiber-Cloths/dp/B0009IQZH0/ref=sr_1_2?s=automotive&ie=UTF8&qid=1485455013&sr=1-2&keywords=supreme+shine
I just buy all their gallon sized stuff and then reuse my old bottles of spray wax, detailers spray, glass cleaner, wheel bottles, etc. Saves me lots of money, like the difference between $100 now or a couple hundred by next year. For instance their gallon size of glass cleaner is probably enough to set you straight on that for a few years, dilutes 10-1 with distilled water. That's 10 gallons of glass cleaner, put that in an old windex bottle and never run out!
Also the Chemical Guy's bucket kit https://www.amazon.com/Chemical-Guys-ACC_101-Detailing-Bucket/dp/B001U522GO was a pretty amazing deal and necessary if you're going to use coin-wash bays. However the mitt included is a bit rough, so instead I use a meguiar's microfiber mitt as its the softest I've found so far. The paint on this car is very soft so it's important to use the softest products possible on the paint.
An Invisible Glass Reach and Clean tool has worked out great for cleaning the interior glass and keeping it from fogging up. Great item to have. https://www.amazon.com/Invisible-Glass-Reach-Clean-95161/dp/B0017K69MA
And a bird poop tip, keep a plastic container with microfibers, a bottle of water, and a bottle of last touch / spray wax mix in the trunk or behind passenger seat. If a bird hits the car, just soak microfiber with water, apply for 30 seconds, and then clean with the detailer spray / spray wax.
To prevent corrosion, you're going to want to clean deep into the wheel wells and stuff with dedicated brushes and mitts, and then use an anti corrosion product (I ordered some ACF-50 spray recently, getting it in the mail today probably) https://www.amazon.com/Lear-Chemical-ACF50-Anti-Corrosion-Lubricant/dp/B000P1C8UO . You're going to want to check crevices for salt buildup, it can happen on some of the window trim parts, so it might be necessary to remove them and clean them out if it starts to rust underneath. You might want to use dabs of silicone stuff to prevent water and salt from corroding these spots. There are a few posts about corrosion of FT86club forums so read up on them. Also your cabin air filter, leaves and bugs like to get in your cabin air filter and make things nasty. You can easily check / service this yourself, its behind the glove box.
For maintenance, I would NOT go past 5000 miles on an oil change, and be choosy where you take your oil changes. The car likes running on fresh oil period. Buy a 5 pack of oem oil filters and oem crush washers to keep yourself straight for awhile, saves money and time. Or also a fumoto oil valve can save even more effort, as a DIY'er it made my oil changes the easiest thing to do. Check your tire pressure constantly, because a decrease in pressure will make the car drive like crap and will wear your tires out quickly.
Your 60k mile maintenance or therabouts is an important interval. Needs stuff done like spark plug changes, and probably checking the clutch throwout bearing to see if it has become worn. These are expensive and labor intensive, expect a $1000 bill.
Why's that? I had considered picking up a pair of these: http://www.amazon.com/dp/B000RXKR6M
However, I read quite a lot stating that the sponge was actually the superior option for ONR (particularly those Lowe's sponges), so I decided to go with those instead.
I have posted this setup else where and I think it's a better deal with the same results.Soap Foam Gun Wash Mitt Drying for about $60. It's what I started out with and I still use gold class every now and again and the foam gun for my Motorcycles.
Oh wow thats great. I had no idea it was that strong. I will probably plastidip my wheels a matte black color to go with my white BRZ. Should look good!
Never use a bristle brush on my wheels, just a microfiber mitt.
Thinking about it I believe I can recommend 4 products:
Pink clay bar, really good for a regular claying.
Blue clay bar, for neglected paint, be aware that you'll need to polish after claying because it will leave swirls.
Chemical guys clay lube, maybe there's better, but this is the best for its cost.
Meguiar's wash mitt, doesn't scratch the paint and it's really affordable.
Here's my opinion
Shampoo- good choice, make sure you're using a washing mitt and not any kitchen sponge, something like http://www.amazon.com/Meguiars-X3002-Microfiber-Wash-Mitt/dp/B000RXKR6M/ref=sr_1_1?ie=UTF8&qid=1405903374&sr=8-1&keywords=washing+mitt will be fine
Towel- while you can dry with any microfiber towel, it will be best to use one specifically made for drying so you don't have to wring out the towel after every wipe. Also, using a low quality microfiber has the possibility of scratching the paint. My recommendation would be http://www.theragcompany.com/Dry-Me-A-River-26-x-59-Premium-Microfiber-Waffle-Weave-Towel-42009-2659-OW.htm
Wax- I have no idea how much you want to spend, but if you're going to be applying it by hand you generally want to go with a carnuba wax as they are easier to apply and wipe off. My personal favorite is pinnacle souveran liquid wax. Probably out of the price range for a beginner, but it's super easy to apply/wipe off, and it produces amazing results and lasts a lot longer than other carnuba waxes. http://www.autogeek.net/pinliqsouvwa.html If you want something on the cheaper end and can be purchased in auto stores, go with Meguiar's gold class liquid wax. http://www.amazon.com/Meguiars-G7016-Carnauba-Premium-Liquid/dp/B0002UNOYM/ref=sr_1_2?ie=UTF8&qid=1405903940&sr=8-2&keywords=gold+class+wax
Applicators- If you're applying wax, go with a foam applicator pad like these lake country applicator pads(make sure they're the red color) with this palm grip
Headlights- If you have a power drill, I recommend this http://www.amazon.com/Meguiars-G3000-Heavy-Headlight-Restoration/dp/B004HCOE72/ref=sr_1_1?ie=UTF8&qid=1405904455&sr=8-1&keywords=meguiars+headlight kit as it attaches right to the drill and works very well.
I just went with the Meguiar's since it was only $6, but haven't really compared to anything else yet. I guess I have been generally happy with other Amazon Basics items.
Here's a long thing I wrote for a friend just getting started. It was an email and i don't feel like fixing links.
https://smile.amazon.com/gp/product/B0050IQH9K/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://smile.amazon.com/gp/product/B00GG9FI8I/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://smile.amazon.com/gp/product/B0009IQZFM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://smile.amazon.com/Mothers-07240-California-Gold-System/dp/B0002U2V1Y/ref=sr_1_3?ie=UTF8&qid=1476666101&sr=8-3&keywords=mother%27s+detail+kit
https://smile.amazon.com/Viking-862400-Blue-Microfiber-Applicator/dp/B0051MYL8E/ref=sr_1_3?ie=UTF8&qid=1476666178&sr=8-3&keywords=wax+applicator
https://smile.amazon.com/Detailing-Multi-Use-Microfiber-Professional-Dual-Pile/dp/B01L4L4L26/ref=sr_1_17?ie=UTF8&qid=1476666651&sr=8-17&keywords=microfiber+buffing+towel
https://smile.amazon.com/Meguiars-X3002-Microfiber-Wash-Mitt/dp/B000RXKR6M/ref=sr_1_1?ie=UTF8&qid=1476667551&sr=8-1&keywords=meguiars+wash+mitt
https://www.amazon.com/Mothers-05664-California-Gold-Wash/dp/B0009H51B2/ref=sr_1_9?rps=1&ie=UTF8&qid=1476668207&sr=8-9&keywords=car+wash&refinements=p_85%3A2470955011
Do you have 2 buckets to use? Always set one bucket up with the soap water, and the other with just water. Soak up your mitt, wash the car, rinse the mitt, then soak again in the soap water. This helps reduce contaminants. If you want to go the extra mile, get these for the buckets to prevent dirt from swashing around the bucket:
https://smile.amazon.com/Grit-Guard-Insert-Red-Diameter/dp/B000N3W8J0/ref=sr_1_2?ie=UTF8&qid=1476667750&sr=8-2&keywords=grit+guard
It fits in a home depot bucket.
If you have particularly pesky tar or bugs on the car, you'll need this that you can get from any autozone type store:
https://smile.amazon.com/Stoner-Car-Care-Tarminator-Remover/dp/B0002LBGWI/ref=sr_1_1?ie=UTF8&qid=1476667917&sr=8-1&keywords=tarminator
WARNING **
When using the power lock (or any sealant / non-liquid wax), DO NOT let it touch any black plastic or rubber parts of the car!!!!! If it does, just wipe it off with a wet micro fiber cloth. Failure to follow this will result in a white hue on the black piece. You could always painter's tape off those areas that are hard to avoid.
Steps for this process:
1b) Bring the car to an area with as little sun light as possible for the next steps!
Your list looks good, but is lacking a few item IMO:
http://www.amazon.com/Meguiars-X3002-Microfiber-Wash-Mitt/dp/B000RXKR6M/ref=sr_1_1?s=automotive&ie=UTF8&qid=1396913798&sr=1-1&keywords=microfiber+wash+mitt The mitt you listed should be fine, but I use these. I have 3 of them and it's good to have more than one lying around in case one gets too dirty during the wash. I like to use a different one for the bottom of my car anyway.
I'd get at least one more pack of those Chemical Guys microfiber towels. The more the better.
I use Sonax Full Effect Wheel Cleaner. http://www.amazon.com/Sonax-230200-755-Wheel-Cleaner/dp/B003UT3S6Q/ref=sr_1_1?s=automotive&ie=UTF8&qid=1396914006&sr=1-1&keywords=sonax+full+effect+wheel+cleaner It's a bit pricey but it's very effective at removing brake dust.
For applying the wax, you'll need an applicator pad http://www.amazon.com/Meguiars-X3070-Soft-Foam-Applicator/dp/B0009IQZPW/ref=sr_1_1?s=automotive&ie=UTF8&qid=1396914054&sr=1-1&keywords=foam+applicator+pad