#107 in Industrial & Scientific
Use arrows to jump to the previous/next product

Reddit mentions of Oil Slick Sheet Labratory Grade PTFE Roll Solvent Resistant Alternative to Parchment Paper, 48x16"

Sentiment score: 7
Reddit mentions: 22

We found 22 Reddit mentions of Oil Slick Sheet Labratory Grade PTFE Roll Solvent Resistant Alternative to Parchment Paper, 48x16". Here are the top ones.

Oil Slick Sheet Labratory Grade PTFE Roll Solvent Resistant Alternative to Parchment Paper, 48x16
Buying options
View on Amazon.com
or
    Features:
  • A disposable alternative to parchment paper; the Slick Sheet is a laboratory grade PTFE film. Slick Sheet is 100% Resistant to Non-Polar Solvents and rated for direct, long term, solvent exposure. Slick Sheet is an ideal liner for collection vessels and evaporation dishes and has excellent heat transfer up to 500°F.
  • Drip mat for Botanical Extraction , Other uses for Slick Sheet are: Packaging for sticky extracts, Liner for various extraction apparatus, Vacuum chamber inserts, Non-stick sleeves for glass on glass joints, Use whenever an ultra glossy appearance is desired
  • Helpful Hints: Feel free to cut, fold, score and re-use the Slick Sheet. However, repeated folding and creasing can wrinkle the surface and impact non-stick performance over time. Sharp tools are not recommended for use with the Slick Sheet. For a pristine result, inspect your Slick Sheet for airborne debris before each use. DO NOT OVERHEAT. Heat in excess of 500°F may damage the Slick Sheet.
Specs:
ColorWhite
Height2 Inches
Length48 Inches
Weight0.43125 Pounds
Width16 Inches

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Found 22 comments on Oil Slick Sheet Labratory Grade PTFE Roll Solvent Resistant Alternative to Parchment Paper, 48x16":

u/waxfan · 18 pointsr/CannabisExtracts

Some are using ptfe sheets like....

https://www.amazon.com/Oil-Slick-Labratory-Resistant-Alternative/dp/B00AWK04IQ

Maybe this is what you experienced?

u/bliss219 · 6 pointsr/CannabisExtracts

as its been said blasting straight to metal is bad. also blasting straight to parchment is bad. use PTFE slick sheets. its reusable to a point and you never have to scrape again!
https://www.amazon.com/Oil-Slick-Labratory-Resistant-Alternative/dp/B00AWK04IQ

u/bolognasilencer · 5 pointsr/CannabisExtracts

Assuming Butane is your solvent, blast onto glass or Teflon if you don't want to scrape.

If you scrape when the dish is warm with a clean/sharp blade, it will come off a lot easier.

u/Slab_Amberson · 3 pointsr/CannabisExtracts

Chamber and pump - $235

Glass extract tube that holds 60 grams - $40 A larger tube may be necessary, I don't know how big your pants are but Amazon has tons of different sizes to choose from.

25 micron Mean Screenz - $20

Thermometer gun - $17

PTFE sheet to blast onto - $20

I use these rubber gaskets to attach my screens on and tighten a hose clamp over the gasket - $15 So the order will be glass tube, screen, gasket, hose clamp.

Presto griddle - $23

This gives you a total of $370 with plenty room for shipping, butane, and anything else you may need.

u/brohemith · 3 pointsr/CannabisExtracts

As others have said, PTFE sheets are the best way to go. Something like these; http://www.amazon.com/Oil-Slick-Labratory-Resistant-Alternative/dp/B00AWK04IQ

Being able to blast, heat purge, and then transfer to vacuum all in one pan makes the entire process go a lot easier. It especially helps in giving a nice, even patty so all of it purges equally.

u/Faxon · 3 pointsr/CannabisExtracts

http://www.amazon.com/Slick-Sheet-Ptfe-Teflon-Roll/dp/B00AWK04IQ/ref=sr_1_1?ie=UTF8&qid=1394122909&sr=8-1&keywords=oil+slick+teflon

prime shipped next day to your door. THIS STUFF IS NOT PARCHMENT PAPER. It is a special plastic (Polytetrafluoroethylene, or PTFE, known as teflon by many) known for its solvent resistance and nonstick properties. you can process small particles of it and suspend them in solvents as a result without them breaking down, and in lubricating oils as a nonstick sheen to help prevent buildup of grime on bike chains and other moving parts on machinery and also sporting gear like the bearings of most anything and also fishing spools and gun slides. When you make it into a nice solid sheet, it's thick and sturdy enough to hold a decent amount of weight in wax, and can handle the direct solvent contact with the cold butane for the amount of use you will get out of a single cutting. I'd recommend buying a few rolls if you make a lot of wax, as after a couple batches worth of large slabs + folding the sheets do get worn out pretty quick, but it's fucking worth it, and any left over sheet that's still intact can be used for the storage of slabs as well.

u/dropbhombsnotbombs · 3 pointsr/CannabisExtracts

It's a roll of parchment paper-like material that's safe to blast directly onto. Here's a link.

u/Dabs2Review · 2 pointsr/CannabisExtracts

Mind throwing up the link to the ptfe you bought?

I've always used this without problems https://www.amazon.ca/Oil-Slick-Labratory-Resistant-Alternative/dp/B00AWK04IQ

u/smokedoom · 2 pointsr/Dabs

Oil Slick Sheet Labratory Grade PTFE Roll Solvent Resistant Alternative to Parchment Paper, 48x16" https://www.amazon.com/dp/B00AWK04IQ/ref=cm_sw_r_cp_api_01XOBb1C5K69E

I’m pretty sure it’s this

u/TechJunky1 · 2 pointsr/ShatterDeals

https://www.amazon.ca/Oil-Slick-Labratory-Resistant-Alternative/dp/B00AWK04IQ

Instead of parchment this stuff is laboratory grade. You can even use it for extractions, I have been and it makes it easy to take from the extraction dish to my purge with no scraping until it's finished ;)

This is the best stuff to store extractions in long term. The two images above are product on PTFE

https://en.wikipedia.org/wiki/Polytetrafluoroethylene

u/wagonmafia434 · 2 pointsr/Dabs

i seriously hope you arent dabbing directly out of the silicone puck or the parchment paper - they make these nice glass dishes specifically to handle the heat of a quartz NC - https://www.google.com/search?q=nectar+collector+dish&rlz=1C1GCEU_enUS820US820&sxsrf=ACYBGNQplCW9EGYhesSm7N-m8eVbWsAsRg:1567775852790&source=lnms&tbm=isch&sa=X&ved=0ahUKEwj7yKuWpLzkAhUCTN8KHZhGDUMQ_AUIEygC&biw=1920&bih=937

i strongly suggest storing your concentrate in PTFE, glass, or at least avoid all porous containers like silicon. unless you like your terps leeching out of your concentrate, just sayin....

https://www.amazon.com/Oil-Slick-Labratory-Resistant-Alternative/dp/B00AWK04IQ

​

just dropping some knowledge that was shared with me on this sub a few yrs ago, dont mean to come off as a know it all, just trying to help

u/ToneDef__ · 2 pointsr/CannabisExtracts

Just Use PTFE Sheets BHogart sells fiberglass reinforced stuff for cheapest. PTFE is totally solvent proof and wont dissolve into your extract like silicone. Additionally its used in medical devices because bacteria have trouble adhering to its surface because its so non stick.

Oilslick sells 16' rolls for 1$ a foot at alot of smoke shops.

BHOgart Has larger rolls of the stuff that is fiberglass reinforced for better heat transfer, Strength, and so it "always lays flat"( so you dont get paper curls on the sides of the sheet in the oven).

u/heartbraden · 2 pointsr/CannabisExtracts

Is this what you use now?

u/dothosenipscomeoff · 1 pointr/Dabs

yea it sucks, i had to chuck a bunch of silicone too. but since i plan on dabbing exclusively for the rest of my life, i wanna limit repeated exposure to anything.

glass is great, so is ptfe(teflon). you can get a roll on amazon for like 30 bucks https://www.amazon.com/Oil-Slick-Labratory-Resistant-Alternative/dp/B00AWK04IQ/ref=sr_1_4?ie=UTF8&qid=1527378978&sr=8-4&keywords=ptfe i use glass jars for liquidy stuff and ptfe sheets for shatters. just beware they're both slightly less nonstick than silicone. freezing helps a lot tho

u/funkle1102 · 1 pointr/trees

This is the roll I was talking about. I just cut it down to size and place it in pre-existing containers. I'm not sure of any PTFE containers but I'm sure they're pretty pricy, comparatively. Plus the roll is useful if you like to press your own Rosin because you can re-use it for a long time without worrying about deterioration. Hope this helped!