#1 in Power drill bit extensions
Use arrows to jump to the previous/next product

Reddit mentions of SE 3Pc Power Extension Bit Set - 7503SD

Sentiment score: 2
Reddit mentions: 6

We found 6 Reddit mentions of SE 3Pc Power Extension Bit Set - 7503SD. Here are the top ones.

SE 3Pc Power Extension Bit Set - 7503SD
Buying options
View on Amazon.com
or
    Features:
  • Turn your power drill or impact driver into versatile high-speed nut driver
  • 3-size set has 1/4", 3/8" and 1/2"-drive anvils to work with all your sockets
  • 1/4" hex shaft fits all quick-change adapters and extensions, drill chucks
  • Spring-loaded stainless steel tension ball keeps sockets in place
  • Hardened and treated chrome-vanadium steel alloy for superior strength and durability
Specs:
ColorSilver
Height0.25 Inches
Length2 Inches
Number of items1
Size1-Pack
Weight0.2 Pounds
Width0.25 Inches

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Found 6 comments on SE 3Pc Power Extension Bit Set - 7503SD:

u/MotherFuckinEeyore · 25 pointsr/redneckengineering

I removed the recoil for the pull start. It was 4 small bolts. If you've ever had to fix the pull rope then you've done it before.

When you get that off, you'll see that there's a nut that the recoil was turning. Find a deep well socket that fits that nut. Then you'll need something like this so that you can put the socket on the drill.

https://www.amazon.com/SE-7503SD-Power-Extension-Bit/dp/B0002TW1D8/ref=sr_1_2?adgrpid=59148646213&gclid=CjwKCAjw44jrBRAHEiwAZ9igKAT3jMtbld0tEIJ37YkqehiUYYbUsiPZDf9AmzgEnJg3aWuRCMzMlBoCvygQAvD_BwE&hvadid=295656596052&hvdev=m&hvlocphy=9016188&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=4724770542817919199&hvtargid=kwd-383813721561&hydadcr=20342_9690425&keywords=drill+attachment+for+sockets&qid=1566766883&s=gateway&sr=8-2

After that you just push the primer a few times and then use the drill to turn the motor clockwise until it starts. Be ready to let go of the drill. It might want to spin out of your hand.

https://youtu.be/SRd6A8jkZgA

u/nicbrown · 3 pointsr/Tools

That is a 'drive socket' for a 4mm hex bit. The 'bit' is actually the hex. This is made so people with a socket wrench can use (in this case) 4mm metric allen fasteners.

To use this sort of bit with a drill, you need a socket adapter for a drill. Here is a set with the most common socket sizes. You are possibly better off getting a regular 6mm bit set and a bit holder.

u/FastRedPonyCar · 1 pointr/Mustang

for the rear, lift under the differential (use a hockey puck between the jack and diff cover if your jack doesn't have a pad) and put a jack stand on each side of the car on the frame just in front of where the LCA meets the chassis.

Then lower the jack under the axle which will let you push down the axle so that the springs just fall out.

don't lift the car at the LCA's. They don't seem like they are designed to bear that much pressure on that chassis joint but I could be wrong.

Camber plates are not really needed until you hit about a 2" front drop.

Here's a short list of the most common tools I carry when working on someone's car

Torque wrench

Deep sockets that can take a beating from an impact gun

Extensions (pro tip: if you ever have to change your starter, you will need about 15+ inches of extensions)

And this is the spring compressors I use

http://www.amazon.com/gp/product/B000CMDPLM/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

I also have a 90 something piece craftsman set with most of the 1/4" and 3/8" drive bits and swivels/boxx wrenches, etc but usually use the 1/2 stanley sockets get grabbed first.

These are also super handy if you have a power drill (better yet, a power drill with impact setting)


Mustangs don't really have a whole lot of random tools needed to work on them so unless you have a foreign car, your tool set shouldn't ever really get too complicated.

It's typically when you get blindsided by some small little issue like a rusted or rounded off bolt that can turn a 2 hour job into a 2 day job. I worked on a guy's old fox body to help him replace a clutch and he had 2 stripped transmission bolts. I had these handy which were more or less the only way we could have gotten that done (besides calling a tow truck to take it to a transmission shop)

http://www.amazon.com/Irwin-Industrial-Tools-394001-Bolt-Grip/dp/B0000CCXVZ/ref=sr_1_2?ie=UTF8&qid=1406576108&sr=8-2&keywords=stripped+bolt+remover

u/tigertony · 1 pointr/DIY

THIS plus this. These things were a lifesaver bolting together a massive swing set / playhouse combo for the grandkids last Christmas.

u/acdcvhdlr · 1 pointr/Skookum

If you have a drill, a grinder, a vice/clamp, and something like this you might be able to sharpen the socket yourself. This might be a terrible idea, just sharing some brain rain.

Edit: Tape between the socket and square adapter could be used to make socket more stable for grinding.