Reddit mentions of Spigen U100 Universal Kickstand Compatible with Any Cellphone - Black (US Patent Pending)

You can always just get the case you like and add a thin kickstand like this.

Spigen U100 Universal Metal Kickstand US PATENT PENDING Magnetic Technology Phone Holder iPhone X / 8 / 8 plus / 7 Plus / Galaxy S9 plus / S9 / Note 8 / S8 & More and Case w/ Flat Surface - Black https://www.amazon.com/dp/B01LW6NN8T/ref=cm_sw_r_cp_api_1sKZAbDNW5XQ1

That actually looks really useful!

​

I use a pair of these: https://www.amazon.com/Spigen-Universal-Kickstand-Compatible-Cellphone/dp/B01LW6NN8T/ref=sr_1_3?keywords=spigen+kickstand&qid=1564599809&s=gateway&sr=8-3

Psst

Could throw this on it.. Not sure how it would stick to the skin but ...

https://www.amazon.com/gp/product/B01LW6NN8T/ref=ox_sc_saved_title_2?smid=A2SFKRF5TPZMT5&psc=1

Poetic user here. So far it's the best, and if not the ONLY full body drop protection case for the Axon 7. The raised edges work great as the Poetic case has a pretty big lip around the edges. I've had it for about 4+ months now and it has saved me from multiple drops even on my garage's concrete flooring. Phone stayed intact with little to no damage to the case either. Really surprised at that. I'm 6' 8" so the drops from my hoodie pockets can give you an estimated drop range. It's even dropped from my hands before due to clumsiness.

I ran the Poetic case with the screen protector for a few months until I got tired of all the dust and lint that collects underneath it due to the protector not being 100% flat against the screen. I removed the built in protector and bought some Spigen clear HD film screen protectors to use instead as it makes the screen more clear etc and I don't have to deal with that much debris flying under the screen protector. Because having to remove the front half of the case to clean the screen was a pain because it's sometimes difficult to remove it. Shouldn't complain because it just means it protects it more and won't fly off when dropped.

You can't go wrong with the Poetic case. It's the only full body drop protection case available that's made out of hardened TPU to withstand drops. I also bought one of these Universal Spigen Kickstand which I applied horizontally across the bottom of the case right above the raised edge where it says "Poetic" on the back. It's the best set up for me and don't plan on buying another case for the rest of this phones lifetime.

Here's some pics of what the kickstand looks like on the back (taken with grainy laptop webcam):

https://i.imgur.com/ZzVr0dh.jpg

https://i.imgur.com/6Y4LCXP.jpg

Spigen U100 Universal Kickstand Compatible with Any Cellphone - Black (US Patent Pending) https://smile.amazon.com/dp/B01LW6NN8T/ref=cm_sw_r_cp_apa_i_F5BwDbVBH4VWA

Sure thing! This is one I just bought for myself but I haven't put it on yet so I cant really vouch for it, but it seemed to have pretty good reviews

yeah i dont on their website but i did find it on amazon. heres the link

​

https://www.amazon.com/Spigen-Universal-Kickstand-Compatible-Cellphone/dp/B01LW6NN8T/ref=asc_df_B01LW6NN8T/?tag=hyprod-20&linkCode=df0&hvadid=241942515097&hvpos=1o1&hvnetw=g&hvrand=3277755096371717504&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9015401&hvtargid=pla-380732136375&psc=1

NFC will work (samsung/android pay) But wireless charging will not.

The wireless charger needs more or less direct contact with the phone (even cases that are slightly too thick will mess with wireless charging)

If you're looking to use it as only a stand, One of these should work, if placed at the very bottom of the phone.

https://www.amazon.com/Spigen-Universal-Kickstand-Magnetic-Technology/dp/B01LW6NN8T/ref=sr_1_3?ie=UTF8&qid=1521523421&sr=8-3&keywords=phone+kickstand

Hi everyone, Ive been loving my ESR Kick stand phone case so so much on my Galaxy s10+. So When I got the Fold I really was missing the kick stand.. So at first I took the ESR Kick Stand out of the case and wanted to see if I can glue it to this case..

No deal way to big.. Then I'm like ok Ill just cut the ESR by about one fourth and then it will work.. And it did fit! However then it interfeard with the wireless charging.. So Back to the drawing board...

I found on Amazon..

Spigen U100 Universal Kickstand Compatible with Any Cellphone - Black (US Patent Pending) https://www.amazon.com/dp/B01LW6NN8T/ref=cm_sw_r_cp_apa_i_S1-PDb81MJDX7

I bought two and pasted them on!!

They worked.. I put one on top and one on bottom and now I can use the fold while its proped up by itself..

This of course isnt perfect as it's not the same hinge system as my Favorite ESR! You only get one position with this one.. I'm going to keep looking out for the ESR hinge as that is my favorite but this will atleast hold me over for a while..

What do you guys think?? Also if you have any better ideas please share them...

Thank You
Rene

got you

Or you can get whatever case you want and buy the addon, spigen kickstand which just sticks on with 3M sticker. That's what I did works great.

Edit for link:

https://www.amazon.com/Spigen-Universal-Kickstand-Compatible-Cellphone/dp/B01LW6NN8T/ref=mp_s_a_1_1?keywords=spigen+kickstand&qid=1551290534&s=gateway&sr=8-1

Also, Spigen makes a stand alone kickstand that you can attach to almost any case

Spigen U100 Universal Kickstand... https://www.amazon.com/dp/B01LW6NN8T?ref=ppx_pop_mob_ap_share

I've combined a case like this and an adhesive kickstand like this.

Couple things--
Probably the only viable placement of the adhesive kickstand is below the camera and above the power button, like this.

This way, the added kickstand doesn't add any ADDITIONAL thickness to the case, since you can place it on the "recessed" part of the case design.

CAVEATS:
Due to our wide angle lens, you have to attach the kickstand sufficiently far below the camera area to make sure the wide angle lens doesn't pick it up on the edges of the photo. In turn, this forces you to place the kickstand basically hovering over the top portion of the power button hole, a little bit. It doesn't completely block the power button (you can still press it, but with your finger tip point, not the "pads" of your fingers) so if you use the fingerprint sensor, then this probably will not work for you.

Also, due to the design of the kickstand (and the placement) it only works horizontally, if that matters to you.

I use the Tudia Merge seen here: https://www.amazon.com/gp/product/B07Q78SY15/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

I too like a kickstand so I also got one of the Spigen ones. I was prepared to glue it to the case, but that 3M-like adhesive that it comes with does the trick just fine. Here's the one I got, though there are other form factors from Spigen as well. Its magnetic closure is slick. Protrudes from the case a bit, but for me that's a non-issue: https://www.amazon.com/Spigen-Universal-Kickstand-Compatible-Cellphone/dp/B01LW6NN8T/ref=sr_1_3?crid=QEGY2NT8TCOE&keywords=spigen+kickstand&qid=1562447511&s=electronics&sprefix=spigen+kick%2Celectronics%2C147&sr=1-3