#3 in Computer monitor accessories
Use arrows to jump to the previous/next product
Reddit mentions of Sunix IT DisplayPort MST Hub with miniDP 10cm Cable, Black (DPU3000-D2)
Sentiment score: 3
Reddit mentions: 4
We found 4 Reddit mentions of Sunix IT DisplayPort MST Hub with miniDP 10cm Cable, Black (DPU3000-D2). Here are the top ones.
or
- Tiny design integrates Display Port, HDMI, and VGA (RGB) connectivity.
- Enables 3 monitors working simultaneously with video mirror or extension mode
- Triple monitors output resolution up to 2560X1600at60Hz/each from single DP1.2 MST source.
- Ideal for multi-display and TV-Wall application.
- Supports digital audio stream over Display Port or HDMI output.
- Compatible with Display Port v1.2a /1.1a, HDMI v1.4a, VESA DDM, and EDID v1.4 Std.
- Supports Display Port link rates of 5.4Gbps (HBR2), 2.7Gbps (HBR) and 1.62Gbps (RBR).
- Certified by CE, FCC, VCCI, BSMI, C-Tick, and RoHS.
Features:
Specs:
| Color | Black |
| Height | 2.13 Inches |
| Length | 2.76 Inches |
| Weight | 0.09 Pounds |
| Width | 0.55 Inches |
This is the one I use;
https://www.amazon.com/gp/product/B003O55U8K
This one is well recommended, often paired with the OSSC;
https://www.amazon.com/dp/B01B7CEOVK/
Both are decent quality DACs and will not introduce any delay. That said, both (as well as most other) HDMI and DP DACs are not capable of pushing terribly high resolution/refresh combos due to bandwidth constraints; Most DACs top out around 225mhz or so.
If you're looking to make use of a higher end PC CRT and push high resolution/refresh rates, you'll want to go for one of a few DP to VGA adapters which are actually capable of high bandwidth, much closer to or exceeding what the built in DACs on old cards were capable of.
https://www.amazon.com/dp/B00JART8HA/
Or if in Europe, Delock 62967 (Ignore quoted bandwidth on this one, it's capable of well into the mid 300s if not more)
Your best bet is to get the active Benfei adapter for $8 off Amazon.
It can’t do RGB at max resolution but if you set your output to yprbr it can do 1920x1200@85hz.
If you WANT you can waste money on a Sunix and get full RGB, but honestly it’s not worth the 5-10x the price depending on stock and they all have some issues where the bottom band of pixels displays on top.
The benfei is also amazing for PS3 XBox360 etc.
Sunix https://www.amazon.com/dp/B00JART8HA/ref=cm_sw_r_cp_api_i_2ukCDb60YRCWX
Benfei https://www.amazon.com/dp/B01KLKQN9U/ref=cm_sw_r_cp_api_i_wykCDbQ6MSA1X
The fuck am I being downvoted for? Nothing I said was incorrect. I own every product on this list and the FW900...
Possibly the best you can get today is the Sunix one, can do 300+MHz cleanly, https://www.amazon.com/Sunix-DisplayPort-miniDP-Cable-DPU3000-D2/dp/B00JART8HA
For cheaper there's the Tendak one, https://www.amazon.com/Tendak-Converter-Adapter-Portable-Connector/dp/B01B7CEOVK/ref=sr_1_3?s=electronics&ie=UTF8&qid=1549796883&sr=1-3&keywords=tendak+vga+hdmi, good for ~165MHz
I have the NEC sister monitor to yours and a GTX 1080. Your best option is gonna be the SUNIX DPU-3000. It will support all the really crazy high res modes your monitor will display. One caveat, though: Low res display modes don't work in my expirience so I can't get, say, 240p@120hz (or 140hz) to work, have to use one of the crappy adapters for that.
Here is the DPU 3000 for sale: https://www.amazon.com/dp/B00JART8HA/ref=cm_sw_r_cp_apa_i_rO4pDb64AZ8H5
It is not cheap but it is a very good accesory for your LaCie. The one I linked is the -D2 model. The difference is only that -D2 comes with a cable with mini displayport on both ends whereas the other SKU comes with a displayport to mini displayport cable.
Your only other option AFAIK is to get a card that supports analog out natively. A quality card like the GTX 980 Ti will not be as cheap as the SUNIX DAC.