#85 in Computer networking products
Use arrows to jump to the previous/next product

Reddit mentions of Ubiquiti Networks Networks UniFi Switch 8-Port 150 Watts, White

Sentiment score: 16
Reddit mentions: 25

We found 25 Reddit mentions of Ubiquiti Networks Networks UniFi Switch 8-Port 150 Watts, White. Here are the top ones.

Ubiquiti Networks Networks UniFi Switch 8-Port 150 Watts, White
Buying options
View on Amazon.com
or
    Features:
  • Country of origin : China
  • Model Number : US-8-150W
  • Package Weight : 1 pounds
Specs:
ColorWhite
Height1 Inches
Length1 Inches
Number of items1
Release dateJanuary 2017
Weight3.747858454 Pounds
Width1 Inches

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Found 25 comments on Ubiquiti Networks Networks UniFi Switch 8-Port 150 Watts, White:

u/SirEDCaLot · 7 pointsr/homedefense

Honestly- my best advice for you is DON'T go to Costco. You can do much better than anything they have there. All the Costco stuff is Swann/Lorex/etc which is mostly rebadged Hikvision/Dahua stuff.

If you don't have a price limit, do it right.

I'd suggest the easiest 'good' camera to go with is Ubiquiti. Ubiquiti is largely a networking company, but they have a solid surveillance system as well.

Start with the Cloud Key Gen2+ ($191). That's the NVR, and the core of all things Ubiquiti.
Then get the US-8-150W PoE switch. It's an 8 port powered switch, good for up to 6 cameras- that's 6 cameras, the cloud key, and the uplink to your router.
Finally the cameras- try the UVC-G3-Pro. It's one of their higher end cameras at $263 each. But it has a zoom lens so you can customize the field of view, good night vision, and good quality.
If you want the lower end cameras, try the UVC-G3-Flex (about $80) or the UVC-G3-Dome (about $135). Flex is a pretty good camera but night vision isn't as good. Dome is similar quality to the G3 Pro, maybe a little less, but without the zoom lens and also not waterproof (so it can be outside, but only under an overhang).

Now run Cat6 cable from each camera location to a central spot, where you plug in all this stuff.

This is going to cost more than your average Costco camera-in-a-box thing, especially if you use Pro cameras. But the quality and functionality will be a LOT better.

And if you want to upgrade your home network, maybe swap out the 8 port switch for a bigger switch like a US-24-250w (24 ports, $400) and a UniFi Security Gateway ($150ish). Then add some UAP-AC-Pros (about $120) and you'll have amazing WiFi.

u/KingdaToro · 5 pointsr/Ubiquiti

Alright, here we go:

PLANNING

You mainly need to figure out how many cables you need and where you'll run them to. Obviously you'll need one to each location of an AP or camera, so you need to figure out how many you'll run to jacks for connecting Ethernet devices. The bare minimum is one to each TV location and desk location, in this case you'll connect a switch to the jack if you need to connect more than one device. The ideal number is five to your main entertainment center, and two to every other TV location and desk location. This hopefully eliminates the need for secondary switches. In addition, you should run one Coaxial cable to each TV location including your main entertainment center. Add up all the Ethernet cables you'll be running, and keep this number in mind.

As for the network hub location, the best place for it is the basement, preferably an unfinished part of it near the entry point of your internet service. If you don't have a basement, use a utility room. Just make sure it has some sort of ventilation, you don't want stuff getting too hot.

EQUIPMENT

For the actual Ethernet cable, you'll want to get a 1000 foot bulk spool. Get pure copper rather than copper clad aluminum (CCA) and solid conductors rather than stranded. It needs to be riser rated (pretty much any will be) but plenum rating is pointless unless you'll be running it through air ducts. Your big choice here is the category rating: Cat5e or Cat6. Cat5e is good for gigabit, Cat6 will future-proof you for 10 gigabit. Cat6 is more expensive, thicker, and trickier to terminate as the spec only allows a quarter inch of untwisting rather than Cat5e's half an inch.

Keeping in mind the number of wires you plan on running, you'll need a punch-down patch panel with at least that many ports that matches the category rating of your cable. You'll also need punch-down keystone jacks, these also need to match the category rating of your cable. You won't need them for cables going to cameras or APs, you'll just need one for each other cable. For each location where you'll be installing jacks, you'll need a single gang old work low voltage bracket (or a surface-mount box), and a keystone wallplate. Six ports for the main entertainment center, three for each other TV location, two for each desk location. You'll also want a keystone coaxial coupler for each TV location including the main entertainment center.

You have another big choice to make for the main switch, a managed PoE switch or a dumb unmanaged switch. The managed PoE switch will simplify things a lot as it'll power your cameras and APs, while with an unmanaged switch you'll need to use PoE injectors. A managed PoE switch will, predictably, be much more expensive. Either way, you'll ideally want one with at least as many ports as the total number of Ethernet cables you'll planning to install, plus one for the router. You can get one with fewer ports, but then you won't be able to connect all your cables to it at once, you'll need to just connect the ones you're currently using. If you'll be going with a managed PoE switch, get one of these UniFi switches: 8-port with 4 PoE, 8-port with all PoE, 16-port, 24-port, or 48-port. If you'll be getting an unmanaged switch, any is fine. Just make sure it's gigabit. I used this one in my previous house, for example.

For the router, you'll want the UniFi Security Gateway.

You've got another big choice to make for the APs: Lite or Pro. The main difference is that the Lite has two 5 GHz streams, while the Pro has three. Only high-end devices like Macbook Pros have 3-stream Wi-Fi hardware, so if you don't have any devices with this, the Pro won't give you any benefit. Also, since the Lite is cheaper you can get more of them for the money, as more APs rather than better ones is the best thing you can do to improve your Wi-Fi. Both of these are available in single-packs and 5-packs, the single packs include PoE injectors but the 5-packs don't. If you're getting a PoE switch, consider getting a 5-pack of Lites.

You'll need something to run the UniFi controller. This is the software that you use to manage all the UniFi gear in one place. The easiest thing to do is install it on an Ethernet-connected PC and just run it when you need to make changes or update firmware. If you want a dedicated device for running it all the time, you can use a Raspberry Pi or Cloud Key. The Cloud Key is PoE-powered, so it's particularly convenient if you have a PoE switch.

You'll also need a few RJ45 plugs for the AP and camera cables, a crimping tool for them, a 110 impact punch down tool for doing your jack and patch panel terminations, and something to strip the cable jacket. Normally this will be built into the crimper.

Lastly, you'll need a lot of pre-made Ethernet patch cables to connect everything in your network hub. Get ones that are as short as possible, 1-3 feet. You'll need one to connect each cable you've installed from the patch panel to the switch, one for connecting the switch to the router, and another for connecting the router to the modem/ONT (this one may need to be longer). If you'll be using any PoE injectors, you'll need an additional cable for each one. You could make all these yourself, but this is very tedious and time-consuming, and hard to get right. The wires need to be in the right order and all 8 need to be connected for gigabit to work. Lastly, you'll need one for each actual Ethernet device you currently have, these should be 6 feet or longer if necessary.

INSTALLATION AND SETUP

The first thing to do is run all the cables. Camera and AP lines go to the device's location and get an RJ45 plug, all the others go to a keystone jack box/bracket/faceplate. Whenever possible, leave a foot of slack at both ends in case you need to re-do terminations. I like to terminate each cable after I run it, as it makes things easier to keep track of. For all the jacks, note the port number of the cable at the patch panel, and write that same number on the faceplate next to the jack. When you do the terminations, make sure to untwist the wire as little as possible, particularly if you're using Cat6.

For the APs, install the ceiling mount bracket using the included hardware, connect the cable to the AP, and then just put the AP on the bracket and twist it to lock it in place.

At the network hub, first hook up any PoE injectors you'll be using. Connect the patch panel port for the AP/camera cable to the injector's PoE port, and connect the injector's LAN port to the switch. Plug the injector into an outlet. Now connect the rest of the patch panel's ports to the switch, or if you have a smaller switch just connect the ones you're currently using. Connect the USG's LAN port to the switch, and its WAN port to your modem/ONT. Make sure your APs are getting power, their ring light will be white if they are.

Now, open the UniFi Controller (wherever you have it set up) and go to the Devices page. Adopt everything, and update everything's firmware. Go through it and set up everything the way you like. All the UniFi devices will light up blue once adopted and configured.

u/MalfeasantMarmot · 2 pointsr/HomeNetworking

If you're in the IT world, use some old hardware and build a pfSense box. Then a Unifi switch and AP. For a switch maybe something like the US-8-150W, then for AP's theres the AC-Lite on the lower end, nanoHD if you want to go more high end.

Stick with the Unifi stuff. The edgerouters are woefully underpowered. Unifi gives you a single interface to control everything. It's got a great UI and can do relatively advanced stuff.

u/gbdavidx · 2 pointsr/HomeNetworking

https://www.amazon.com/Ubiquiti-Networks-Managed-Gigabit-US-8-150W/dp/B01DKXT4CI/ref=sr_1_1?keywords=ubiquity+switch&qid=1554757555&s=gateway&sr=8-1 can do vlans. You would ideally have all your smart home accessories on 1 vlan, guest vlan, and private vlan (desktops/laptops) that you wouldn't want to have touching your smart home stuff

u/navy2x · 2 pointsr/HomeNetworking

The best thing to do is separate everything out so you can future proof your setup. What if down the line you want to extend your wifi or need more wired ports? When you separate everything out (security gateway/firewall, switch and wifi access points) its much easier to upgrade and troubleshoot. Your typical consumer grade all in one routers have all three of those things in one package and none of them are particularly great.

Ubiquiti is the current leader at this for the home user. They have SOHO grade equipment (small office home office) which is basically enterprise grade equipment but at consumer grade prices.

If I were you, here's what I'd do:
Ubiquiti Unifi Security Gateway (USG) - this will be the brains of your system and allow port forwarding, QoS, deep packet inspection, etc.

Ubiquiti Networks 8-Port UniFi Switch, Managed PoE+ Gigabit Switch with SFP, 150W (US-8-150W) - this gives you 8 ports, all of which can be enabled for power over ethernet which can easily power your security cameras and access points. If you don't need this then you can get the cheaper non-PoE switch Ubiquiti US-8 Unifi Switch

Ubiquiti Networks Unifi 802.11ac Dual-Radio PRO Access Point (UAP-AC-PRO-US) - This is a great access point to give you fast wifi at a great range. This plugs directly into your switch via ethernet cable. If you need to extend you wifi then you can get a second one and plug it in. These can be powered by PoE which is really nice.

Total cost: $461

I guarantee you would end up spending more upgrading an all in one router over the next few years. This will easily last you 10+ years if not more and be enterprise grade equipment.

u/michrech · 2 pointsr/HomeNetworking

> -Should the computer/plex server be wired to router or the switch?

Doesn't matter.

> -Any recommendations on a POE switch?

Not sure if other manufacturers make a 24v passive PoE switch that'll work with the UAP-AC-Lite (it's not standard 802.1at/af capable like the UAP-AC-Pro). Depending on how many ports you need, The Switch-8-150W or the Switch-16-150w would work.

> -Is cat6 okay to run over POE?

yes.

> -Will 3 Lites cover the house or should I get 3 LRs?

LRs probably won't do you much good -- they may output more power, but your devices won't, so they may see the AP, but might not have the power to transmit back. I'd start with your current plans, and if you have some weak / dead spots to fill in, add in a UAP-AC-IW...

u/carouselz · 2 pointsr/HomeNetworking

Thanks so much for the details! So you're saying I can just grab this for now to start with? Or do I also need a separate AP for wifi devices? Love the idea of everything being separate so I can build up the system over time.

u/AlmondNut · 1 pointr/HomeNetworking

Did you get anywhere with this? I have a mesh Google WiFi setup running now with cable Internet and want to switch over to CenturyLink fiber. Need to do the VLAN tagging with a switch in between the ONT and router of the main Google WiFi device. I have the Ubiquiti UniFi switch below. How do I set this up?

https://www.amazon.com/gp/aw/d/B01DKXT4CI/ref=yo_ii_img?ie=UTF8&psc=1

u/Wadeace · 1 pointr/HomeNetworking

first off, don't rent a router from your ISP. you will need to use a modem or gateway depending on the type of internet you are getting. if you are using cable or dsl i would also suggest to buy your own modem as well. it's a modern version of renting a rotary phone from the company and a racket.

you can get a router and wifi combo that is new and good for about $150 or more for faster or more advanced features.

as far as game plan for your home here is my suggestions
to start you off since you just moved in and are already renting it for now just use the provided router from to fiber provider so you can get connected and plan the rest of this build out.

depending on the layout and size of your home (cinder block construction is terrible for wifi and other rf signals) you may need multiple access points. my suggestion is to look into a brand of networking equipment called ubiquity.

they are relatively new to the market and have really shaken up the price and feature packs. set up is mainly through a web and mobile app and is very easy for a relatively new person to IT. there is also a huge community here on reddit and youtube showing off features and giving how to's.

here is my goto suggestion if you are willing to invest in an infrastructure more than a single router.

the fiber will come into your property and go through a modem and gateway provided by the isp you would then plug it into a router:
https://www.amazon.com/Ubiquiti-Unifi-Security-Gateway-USG/dp/B00LV8YZLK/ref=sr_1_2?ie=UTF8&qid=1526552321&sr=8-2&keywords=unifi

This is a smaller model that is a router and firewall combo by ubiquity, its about 110 at amazon

Then you plug the router into a switch:
https://www.amazon.com/Ubiquiti-Networks-Managed-Gigabit-US-8-150W/dp/B01DKXT4CI/ref=sr_1_3?ie=UTF8&qid=1526552321&sr=8-3&keywords=unifi

This is a sort of backbone device that you would use to send the internet to other devices and for other devices to comunicate with each other. this one is a poe switch which means it can send power to some devices like access points over the one cat 5 cable. this one has 8 ports so that means 7 outboard devices can be connected to the network because one is needed for the router. they make larger ones with more ports for more devices. this model is currently 194 on amazon

you will then need access points:
https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY/ref=sr_1_5?ie=UTF8&qid=1526552321&sr=8-5&keywords=unifi

these are radios that broadcast wifi to your wireless devises these connect to the switch with cat 5 cables and are best placed near where you are going to use wifi devises the average home would benefit from two or three of these one to cover the living room kitchen great room area and one to cover the bedroom hallway are and possibly one for the backyard pool area (that might be important because of your external walls). this model is currently 80 on amazon.

if you deploy this list you will also need a cloud key:
https://www.amazon.com/Ubiquiti-Unifi-Cloud-Key-Control/dp/B017T2QB22/ref=sr_1_1?ie=UTF8&qid=1526553343&sr=8-1&keywords=cloud+key

this is a devise that manages the network and stores configuration files locally. it's like a mini server. this is about 78 on amazon.

you will also need cat 5/6/7 cables of various lengths and a power strip for about 500 you can get a really great network that can cover your whole house and that can easily be upgraded incrementally as technology improves. My suggestion would be to get all this mounted in a closet somewhere and get cat5/6/7 run to all the things that you can and place the access point in the house so you get the best coverage possible for the IOT devises in your house. as your network grows and you need more wired ports you can add a switch or replace the one with a 24 or 46 port one. when wifi tech improves past ag you can just replace the access points without affecting the rest of the network.another big thing is to run cable to anything you can this will help with keeping your wifi fast since there are less devices on the wifi.

Edit:
If there are two main points they would be:

  1. wire everything you can so that way the devises that need to be wireless can be faster
  2. Don't rent non-proprietary equipment from your ISP
u/kur1j · 1 pointr/Ubiquiti

Excuse the ignorance but what is the advantage of this switch over something like TP-Link 8-Port Gigabit PoE Web Managed Easy Smart Switch with 4-PoE Ports (TL-SG108PE) https://www.amazon.com/dp/B01BW0AD1W/ref=cm_sw_r_cp_api_dF9mybDG17P48?

In addition what is the difference once this switch compared to another one of ubiquitis switches? Ubiquiti Networks 8-Port UniFi Switch, Managed PoE+ Gigabit Switch with SFP, 150W (US-8-150W) https://www.amazon.com/dp/B01DKXT4CI/ref=cm_sw_r_cp_api_ZG9myb310YM0B

u/Fitz9099Mon · 1 pointr/homelab

Unifi US-8-150 switch may fit your quest - 8 gbe and 2 sfp ports with all the 8 ports supporting POE. But you need an UniFi Controller to manage it.
https://www.amazon.com/Ubiquiti-Networks-Managed-Gigabit-US-8-150W/dp/B01DKXT4CI
And it is worth looking into Mikrotik, they make some fanless switches that are inexpensive.

u/majorchamp · 1 pointr/Ubiquiti

So how can I do this without spending $180 for a poe switch?

https://www.amazon.com/Ubiquiti-Networks-Managed-Gigabit-US-8-150W/dp/B01DKXT4CI

u/devianteng · 1 pointr/homelab

I use UniFi cameras. Got a couple UVC-Micro's, and recently bought 2 of the new UVC-G3's that I haven't gotten around to using yet. I really like the software.

The Micro's are wireless, so no need for PoE.
UVC-G3 only works with 24V Passive PoE (injector included), but the UVC-G3-DOMEalso supports 802.3af PoE (or 24V Passive). Not sure why the UVC-G3 can't do 802.3af, but either way, injectors are included or you can get one of the 24/48 port switches that support PoE, or their Switch 8. If you're only looking at 1-3 cameras, I'd just use the injectors and keep them close to your switch (i.e., in your rack or whatever you have).

No idea what the IR range is with the UVC-G3, but they do have a range extender (UVC-G3-LED) that is rated for up to 82ft. Ring is kinda pricy, IMO. Most of my Micro's are indoors, but I do have one on the porch that does pretty decent at night, but will soon be replaced with a UVC-G3.

Overall I'm happy with them. I have several Ubiquiti products, and never really had any showstopper issues with any of them.

u/bayates826 · 1 pointr/HomeNetworking

Which Ubiquiti cameras are you using? The dome cameras support both standard PoE and 24V while the G3 series only support 24V.

This Ubiquiti switch does both.

I realise you are trying to save money, but not a lot of switches do the 24V option if that is what you will need. Have you considered just using PoE injectors? That would be the cheapest way IMO.

u/tacol00t · 1 pointr/hardwareswap

I have an 8 port ubiquiti one that's the full 8 port 150w one if you're interested.

Ubiquiti Networks 8-Port UniFi Switch, Managed PoE+ Gigabit Switch with SFP, 150W (US-8-150W) https://www.amazon.com/dp/B01DKXT4CI/ref=cm_sw_r_cp_api_SJcVBbK3RQQZ9

That one to be exact. I think I have the OEM box as well but I could be wrong, feel free to PM

u/visionik · 1 pointr/computing

Yes as you said below, you really don't want a "mesh" network. That means something totally different.

You just want PoE access points that can do hand-of, which UniFI can do for sure. I use UniFI at my house and it's 100% worth it. Either of these will work:

https://www.amazon.com/Ubiquiti-Compact-802-11ac-Enterprise-UAP-NanoHD-US/dp/B07DWW3P6K/

https://www.amazon.com/Ubiquiti-Networks-UAP-AC-PRO-Access-Included/dp/B079DSW6XX/

but the first one (the NanoHD) is newer and supports 802.11ac wave2.

With unifi you really should go all-in with unifi equipment. That's when the system works best. I'd recommend this PoE switch:

https://www.amazon.com/Ubiquiti-Networks-Managed-Gigabit-US-8-150W/dp/B01DKXT4CI/

You get 8 ports of PoE ethernet and two SFP ports. You can turn the SFP ports into two more RJ45 gigabit ethernet ports (without PoE) with these:

https://www.amazon.com/gp/product/B01JUBXDPI/

Alternatively, if you need many more ports or want something rack-moutable, I'd use this switch:

https://www.amazon.com/Ubiquiti-Networks-US-16-150W-UniFi-Switch/dp/B01E46ATQ0/

You'll also need a computer that's always on somewhere in your house to run the UniFI controller software. The controller is how you configure and track everything. It's really light-weight, so it can just run in the background on a desktop or some old Mac or PC.

Alternatively you can just plug a "UniFI Cloud Key" controller into one of your PoE ports:

https://www.amazon.com/Ubiquiti-Secure-Controller-stand-Alone-Hardware/dp/B07BB4RGQD/

One caveat, if you use the cloud key make sure you back up your unifi database (on the controller) often. I've had them fail on me more than I like.

Finally, if you don't like any of those you can use a hosted instance of the cloud controller but it's $199 a year:

https://community.ubnt.com/t5/UniFi-Wireless/Announcing-UniFi-s-newest-Cloud-management-offering/td-p/1912538

u/hatran2 · 1 pointr/Ubiquiti

Could you look over these parts and let me know if I'm missing anything? Would I just be monitoring this stuff at my desktop that's wired in or would I need something else to control all this? I'm not sure on which switch I need.

Fiber connection>Gateway/Router> Switch 1 or Switch 2 > ethernet > AP

I am being pushed towards the in wall AP cause the fiance doesn't like things poking out from our ceiling and I was told wall mounting them doesn't work as well. From looking on their forums the UAP-AC-IW-PRO beta testers have said they are getting surprisingly good signal from their in wall AP since they have better antennas. But if I was able to go the UAP-AC-PRO route ceiling mounted how many and where would you suggest I place them?

So this is my home layout. I assumed these were the best places to put them. The red arrows show which direction the AP will be facing from the wall and the blue box is where everything terminates and I'm assuming that's where the gateway and switches will be. The ethernet drops in the living room and game room are higher up then the rest. I can have an updated picture of where all the ethernet drops are around my house if that would help.

The bedrooms near the front of the house aren't currently being used so I'm not to focused on them but I could always go back and add another AP later in that area right?

This seems like it's going to blow through my $500 budget but I'm assuming it's worth it over getting something like the Eero 2nd generation?

u/Paroxysm_Rancor · 1 pointr/Ubiquiti

If ease of use is your thing then get the USG, 8 port UniFi switch, and an AP-AC-LR, The AP-AC-LR's have both 2.4/5Ghz bands.

You can get two AP-AC-LR's and UPLINK the second from the first one if you are unable to run Ethernet.

No need to add a router off the switch as it will segregate the networks. I.E. Create two networks. And it's rather pointless.

Just buy a second access point.

What sq ft are you trying to cover? 1 AP-AC-LR can relatively cover a 1500 sqft 1 story wood/plaster home.

USG: https://www.amazon.com/Ubiquiti-Unifi-Security-Gateway-USG/dp/B00LV8YZLK/ref=sr_1_1?s=pc&ie=UTF8&qid=1485235835&sr=1-1&keywords=unifi+usg

Switch: https://www.amazon.com/Ubiquiti-Networks-Managed-Gigabit-US-8-150W/dp/B01DKXT4CI

AP-AC-LR: https://www.amazon.com/Ubiquiti-UAP-AC-LR-Networks-Enterprise-System/dp/B015PRCBBI/ref=sr_1_1?s=pc&ie=UTF8&qid=1485235882&sr=1-1&keywords=AP+AC+LR