#300 in Computer networking products
Use arrows to jump to the previous/next product
Reddit mentions of Ubiquiti UniFi nanoHD Compact 802.11ac Wave2 MU-MIMO Enterprise Access Point ( UAP-NANOHD-US)
Sentiment score: 6
Reddit mentions: 10
We found 10 Reddit mentions of Ubiquiti UniFi nanoHD Compact 802.11ac Wave2 MU-MIMO Enterprise Access Point ( UAP-NANOHD-US). Here are the top ones.
Buying options
View on Amazon.comor
Four stream 802.11AC Wave2 technologySupports 200+ concurrent users802.3af PoE compatibilityOptional covers (sold separately) allow the Unifi nanohd AP TO discreetyly blend into its setting
Specs:
Height | 1.3 Inches |
Length | 6.3 Inches |
Number of items | 1 |
Release date | April 2018 |
Size | 1-Pack |
Weight | 1.4991433816 Pounds |
Width | 6.3 Inches |
Yes and no. What you think of a "wireless router" is three devices in one: router, switch, and access point. The router moves data between different networks (routing), allows multiple devices to share a single public IP address (NAT), blocks unwanted internet traffic from reaching the local network (firewall), and assigns local IP addresses to devices on the network (DHCP). The access point does Wi-Fi, and the switch connects everything together and gives you multiple LAN ports. There is no ultimate device that does all this, because these jobs are so different and specialized.
Instead, you should to look for dedicated devices that each handle ONE of these three jobs and does it really well. For example, this is a dedicated router. It does not do switching or Wi-Fi. You'd connect the WAN1 port to your modem or ONT and the LAN1 port to a switch. This is a dedicated switch, you connect one port to your router and connect any number of devices, APs, and even other switches to it. This is a dedicated AP. You connect it to a switch, and it only does Wi-Fi and does it really well.
You can add any number of switches and APs, so that you've got Ethernet ports and Wi-Fi coverage available wherever they're needed. Of course, everything needs to be connected with Ethernet cable, but this is the price of the best performance.
So, no, there is no ultimate "wireless router", but what you're really looking for is the ultimate network.
Edit: Part of having the ultimate network is only using Wi-Fi where necessary. Anything that stays put should use Ethernet whenever possible. And it's possible more often than you think, this adapter can connect lots of devices that you'd think are Wi-Fi only to Ethernet.
I think OP saw the "By Ubiquiti Networks" on the NanoHD Page. I never really paid any more attention than that but to find the real seller you need to go into this page.
Unifi stack all the way:
Unifi Security Gateway: Ubiquiti Unifi Security Gateway (USG) https://www.amazon.com/dp/B00LV8YZLK/ref=cm_sw_r_cp_api_i_ouoqDbNGPTMRV
Unifi PoE switch (if needed): Ubiquiti UniFi Switch - 24 Ports Managed (US-24-250W) https://www.amazon.com/dp/B00OJZUQ24/ref=cm_sw_r_cp_api_i_2uoqDbP4PF520
Unifi AP nanoHD: Ubiquiti UniFi nanoHD Compact 802.11ac Wave2 MU-MIMO Enterprise Access Point (UAP-NANOHD-US) https://www.amazon.com/dp/B07DWW3P6K/ref=cm_sw_r_cp_api_i_rvoqDb562BQEE
Total: $667.56
No VLANs necessary for your scale.
If you don’t want to manage a Unifi Controller, we offer that as a service for customers. https://peopleit.com or give us a call at (616) 594-7100 if you have any questions.
You want an access point. I would suggest the Ubiquiti Nano HD
After reading your comments and taking that knowledge to Amazon and reading reviews and questions over there, as well as the Ubiquiti website, I pulled the trigger tonight on 2 Unifi nanoHD units.
This is the Amazon sku: Ubiquiti UniFi nanoHD Compact 802.11ac Wave2 MU-MIMO Enterprise Access Point (UAP-NANOHD-US)
Thank you for your input on these units.
Yes as you said below, you really don't want a "mesh" network. That means something totally different.
You just want PoE access points that can do hand-of, which UniFI can do for sure. I use UniFI at my house and it's 100% worth it. Either of these will work:
https://www.amazon.com/Ubiquiti-Compact-802-11ac-Enterprise-UAP-NanoHD-US/dp/B07DWW3P6K/
https://www.amazon.com/Ubiquiti-Networks-UAP-AC-PRO-Access-Included/dp/B079DSW6XX/
but the first one (the NanoHD) is newer and supports 802.11ac wave2.
With unifi you really should go all-in with unifi equipment. That's when the system works best. I'd recommend this PoE switch:
https://www.amazon.com/Ubiquiti-Networks-Managed-Gigabit-US-8-150W/dp/B01DKXT4CI/
You get 8 ports of PoE ethernet and two SFP ports. You can turn the SFP ports into two more RJ45 gigabit ethernet ports (without PoE) with these:
https://www.amazon.com/gp/product/B01JUBXDPI/
Alternatively, if you need many more ports or want something rack-moutable, I'd use this switch:
https://www.amazon.com/Ubiquiti-Networks-US-16-150W-UniFi-Switch/dp/B01E46ATQ0/
You'll also need a computer that's always on somewhere in your house to run the UniFI controller software. The controller is how you configure and track everything. It's really light-weight, so it can just run in the background on a desktop or some old Mac or PC.
Alternatively you can just plug a "UniFI Cloud Key" controller into one of your PoE ports:
https://www.amazon.com/Ubiquiti-Secure-Controller-stand-Alone-Hardware/dp/B07BB4RGQD/
One caveat, if you use the cloud key make sure you back up your unifi database (on the controller) often. I've had them fail on me more than I like.
Finally, if you don't like any of those you can use a hosted instance of the cloud controller but it's $199 a year:
https://community.ubnt.com/t5/UniFi-Wireless/Announcing-UniFi-s-newest-Cloud-management-offering/td-p/1912538
Here’s a link to it
TL/DR: a bit of background and personal experience ultimately suggesting that you run some network cable, and look into a full Ubiquiti setup with USG router, PoE switch & NanoHD Wi-Fi AP’s for around $400 including cabling, provided you’re not planning on upgrading your internet to faster than 1Gbps soon.
I’m not familiar with coax cable internet, but assume you can get some sort of Ethernet handoff from your modem?
Either way, make the effort and run some CAT6 cabling for Wi-Fi AP’s, and key devices too if possible.
My network setup in my 1150 square foot apartment, works perfectly on my 200Mbps fibre connection and would cost you around $483 for the following:
I host the Ubiquiti Controller on a Windows PC acting as my home storage & media server and keep this running as a service (not necessary I know, but I like the stats).
My network serves a mixture of around 30 devices, consisting of phones, tablets, computers, my home storage & media server, IoT devices, home theatre & TV’s all whilst doing some online gaming myself in the mix without hiccup. Hiccups are generally self-induced by my fiddling on the network. But from a stability and capability aspect, it’s perfect for me.
I’ve previously used the “cheaper” MikroTik RB2011 ($102), which could also work for you - https://www.amazon.com/MikroTik-RB2011UiAS-RM-Routerboard-Rackmount-5xGbit/dp/B00DYWE2Z0
However, if you you were already considering Ubiquiti Wi-Fi AP’s, then possibly consider going with a full Ubiquiti setup, by getting one of their routers & Wi-Fi AP’s? Ubiquiti’s UniFi range is quite impressive and I too like the commercial appeal of their products, so I’m slowly shifting my network over to a full Ubiquiti one (don’t tell my wife). A Ubiquiti setup could cost you between $384 with 1 AP and $533 with 2 AP’s... (although I feel you may need at least 2 AP’s)... excluding the cost of the cabling needed.
But if I were you, I’d look into a setup like:
https://www.amazon.com/Ubiquiti-UniFi-Switch-60W-US-8-60W/dp/B01MU3WUX1
If you could, the more robust UniFi USG-Pro 4 (tad bit expensive) would be a great router as I’ve read that the standard USG can cause speed issues with speeds above 500Mbps, when enabling nice-to-have features like its Deep Packet Inspection (DPI) and Intrusion Prevention System (IPS). These features are not necessary, but nice if you’re like me and like the stats and functionality they bring.
Good luck and enjoy the setup once you decide and get the kit. Always fun setting up a new network gear.
edit:
Price History
ReviewMeta: ★★★★✮ 4.5/5 from 929 valid reviews
CamelCamelCamel - [Info] │ Keepa - [Info]
ReviewMeta: ★★★★✮ 4.6/5 from 18 valid reviews
CamelCamelCamel - [Info] │ Keepa - [Info]
ReviewMeta: ★★★★✮ 4.5/5 from 51 valid reviews
CamelCamelCamel - [Info] │ Keepa - [Info]
_
These savings aren't just Black and White.
^(Info) ^| ^(Developer) ^| ^(Inquiries) ^| ^(Support Me!) ^| **[^(Report Bug)](/message/compose?to=The_White_Light&subject=Bug+Report&message=%2Fr%2Fbapcsalescanada%2Fcomments%2Fcdtvff%2Famazonca_prime_day_megathread_day2%2Fetx98az%2F%0D%0A%0D%0A%0D%0A%0D%0APlease+explain+here+what+you+expected+to+happen%2Fwhat+went+wrong.)**
If you aren't on a tight budget you might want to go prosumer and you could look into separating the router into it's components parts rather than an all in one. For example:
​
The NanoHD is totally overkill for an apartment but once it's setup you'd likely never have wifi issues ever again. You can check out the Lite and Pro models as cheaper options but the NanoHD is the newest. Setup isn't as trivial as your run of the mill router but you don't need to be a sysadmin either. I've seen the ER-X go down to $50 at memory express before and it's an excellent router.