Reddit mentions of uni Posca Paint Marker Pen - Medium Point - Set of 15 (PC-5M15C), Assorted

http://www.amazon.com/Uni-posca-Paint-Marker-Pen-PC-5M15C/dp/B001ANVDMU

best markers I've found are POSCA paint markers.

I would do a light sanding with 800 grade sand paper on them, prime them with the backing color you want, and let it dry. Then you can draw on them and clear coat.

I recommend doing it this way, as sometimes if you don't prep the plate first the clear coat can have weird effects.

The items I've used:

https://www.amazon.com/280715-American-Accents-Primer-12-Ounce/dp/B00KZ6LLZW/ref=sr_1_2?ie=UTF8&qid=1491242783&sr=8-2&keywords=Rustoleum+Primer

https://www.amazon.com/Uni-posca-Paint-Marker-Pen-PC-5M15C/dp/B001ANVDMU

The primer you can use black/white/any color for backing, and I use the same brand in a clear matte finish for the clear coat.

POSCA Marker Pens!

I use these. They come in a few different sizes so I have 3 or 4 sets. Before you apply paint to Canvas shoes you need to prep them with gesso or a textile medium so your colors don't bleed. When I finish painting I spray them with krylon clear coat or matte depending on the look I'm going for.

ah, yeah dont order it from japan. This is a set of 12 that are shipping out of hte us: https://www.amazon.com/Uni-posca-Paint-Marker-Pen-PC-5M15C/dp/B001ANVDMU/ref=sr_1_5?rps=1&ie=UTF8&qid=1505092732&sr=8-5&keywords=uni+posca&refinements=p_85%3A2470955011

Thanks! I used some paint markers I bought on amazon. Link if you’re interested

Not sure if you read the details on the last photo, but I write all of these numbers right on the car with a Posca Pen so that I don't have to go hunting for them in the FSM later.

Subrame
Subframe studs: 72 - 87 lb^f
Subframe Member Stay (the V shaped bracket that mounts under the front subframe bolts): 32 - 41 lb^f
SwayBar Brackets: 32 - 41 lb^f
SwayBar Endlinks: 6.5 - 8.7 lb^f (hand tighten + 1/4 turn)

Control Arms Interior (subframe) / Exterior (knuckle)
Camber Arm: 51 - 65 lb^f / 57 - 72 lb^f
Toe Arm: 51 - 65 lb^f / 57 - 72 lb^f
Traction Arm: 51 - 65 lb^f / Exterior 57 - 72 lb^f
A Arm (RLCA): 57 -72 lb^f / 56 - 64 lb^f + 25mm cotter pin

Coilovers
Suspension Upper Bolts: 12 - 14 lb^f
Suspension Lower Bolt: 72 - 87 lb^f

Diff/Axel/Prop
Rear Diff Mounts: 72 - 87 lb^f
Front Diff Mounts: 72 - 87 lb^f
Diff Cover: 29 - 36 lb^f
Diff/Propshaft bolts: 41 - 48 lb^f
PropShaft Center Bearing mount: 32 - 41 lb^f
Wheel Bearing: 58 - 72 lb^f
Axel Nut: 152 - 208 lb^f + 50mm cotter pin
Axel/Diff bolts: 25 - 33 lb^f
Wheel Studs: 72 - 87 lb^f (these are so commonly overtorqued, its not that much guys!)

Thanx!
I used uni-posca medium and fine points.

https://www.amazon.com/gp/aw/d/B001ANVDMU/ref=sxts_1?ie=UTF8&qid=1520013744&sr=1&pi=AC_SX236_SY340_QL65


https://www.amazon.com/gp/aw/d/B001ANVDMA/ref=sxts_2?ie=UTF8&qid=1520013744&sr=2&pi=AC_SX236_SY340_QL65

Look awesome, really expensive tho, what about these?
http://www.amazon.com/gp/product/B001ANVDMU?psc=1&redirect=true&ref_=ox_sc_act_title_2&smid=A36PBDUX6BE9TK
Uni-Posca markers

Here is the mobile version of your link

Acquiring blanks/labels

Mailing labels: If you're in the US, go down to your local USPS and pick up a stack of these, they're free. You can go after hours when just the lobby is open if you don't want to be asked why you're taking the whole stack.

You can go down to Staples or wherever and find some "Hello my name is" labels.

Check out Egg Shell Stickers if you want to go all out.

Sign up at DHL to order huge quantities of blank label rolls.

Get creative. Anything that is a label can be painted over. You could find scraps of vinyl, too.

Markers and Pens

Decocolor has always been my fav paint marker.

Sharpie also makes some good paint pens. Be mindful of water-based vs. oil-based if you live in a city with weather.

Uni's Posca pens are also great.

Paint

Again be mindful, if you use acrylics they'll run in the rain. You could use spray paint and stencils, or just paint for your backgrounds.

Good news is the paint is pretty durable. We used a base color (pink) and then used some of these and after everything is dried completely, sealing it up with a glossy coat of sealant.

It's quite durable, but can still be damaged easily if you don't take good care of it :) I've knicked the sealant with enough pressure and a perfectly angled finger nail you can scratch it off.

With the sealant though, regular use WONT make the paint or sealant come off :D

Black and white surely, something about the lack of color, can't really put a finger on it...

Are you using the paint markers for this one too? Have you considered other media, like acrylic paints?
Also, Posca makes some amazing paint pens. They have a brush tip and really opaque colors. Like other paint pens the paint does dry in the bristles, but with love they surely last a while.

POSCA PENS I MANAGE A BODYSHOP AND WE USE THESE PENS ANYWHERE ON THE CAR .. THEY WASH RIGHT OFF WITH SOAP AND WATER

I use uni-posca mediums for most of it and for fine details I used prisma markers

Uni-posca:https://www.amazon.com/dp/B001ANVDMU/ref=cm_sw_r_cp_apa_SvFpxb9SVXM83