#16,472 in Tools & Home Improvement
Use arrows to jump to the previous/next product
Reddit mentions of Vaughan TC2012 12-Ounce Commercial Ball Pein Hammer
Sentiment score: 1
Reddit mentions: 1
We found 1 Reddit mentions of Vaughan TC2012 12-Ounce Commercial Ball Pein Hammer. Here are the top ones.
Buying options
View on Amazon.comor
- Mpn: TC2012
- Country of manufacture: United States
- Manufacturer: Vaughan
Features:
Specs:
Height | 1.2 Inches |
Length | 12.8 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 1.12 Pounds |
Width | 4 Inches |
Welcome to the wonderful world of home rifle maintenance. As frustrated as you maybe now, you'll be better able to work on your firearms in the future because of it. We've all been in a similar position where something simple won't work the way it's supposed to.
​
What type of hammer (weight, material, head) and punches (material, diameter) are you using?
How are you placing the receiver while you work on the rifle, are you trying to drive the pin out side to side or top down?
​
Based on what you've posted so far (and not knowing answers to the above yet).
​
If it were me working on the rifle I would make a quick armourers block (see below for link to a purchasable one). Just take a piece of 2x4 and drill a decent sized hole in it, perhaps 3/8" to 1/2". Now clearly there's a lot of pressure holding that pin in place, to remove it you need a proper hammer and a proper punch. For the hammer you need something like a 12oz steel ball pein. For the punch you will need a steel punch with a diameter as close to the pin as possible without going over.
​
To drift that pin out of the receiver you're going to put your armourers block on a solid surface (work bench, garage floor, etc). Place the receiver, on it's side on top of the block, and punch the pin from the top into the hole in the armours block. It will take a few good wacks before the pin will move, and once it does it will move quick.
​
If after all that the pin won't come out I would recommend taking it to gunsmith as you may be doing something wrong.
​
Relevant tools:
https://www.amazon.ca/Real-Avid-Smart-Bench-Block/dp/B01LXE01KU/ref=sr_1_5?dchild=1&keywords=bench%2Bblock&qid=1574830067&sr=8-5&th=1&psc=1
https://www.canadiantire.ca/en/pdp/mastercraft-fibreglass-ballpein-hammer-0574103p.html#srp
https://www.amazon.ca/Vaughan-TC2012-12-Ounce-Commercial-Hammer/dp/B00018AP1K/ref=sr_1_15?keywords=12oz+hammer&qid=1574831381&s=hi&sr=1-15
https://www.amazon.ca/gp/product/B00008IHTJ?pf_rd_p=166ffdfc-3741-4c47-bf8d-82d1def52b0e&pf_rd_r=SXGJ0TT9FGC6PNXD4XHT