Reddit mentions of WireTamer Cable Management Tray - Under Desk Cord Organizer (2 Pack, Black)

I have a similar standing desk and got something like this and a standard cable management tray and mounted both underneath my desk at the back. You can use any normal powerstrip but I wanted the wider one because of some larger power blocks and and because I wanted to more evenly distribute the weight. That way I really only have 1 cord that comes off my desk similar to the one you see here on the right.

​

Edit: I am actually really interested in how you wired the lights. It looks like you punched through the carpet. Did you do that when installing or am I missing something? Did you do the same for ethernet?

Easy fix.

Use cable trays on the bottom of the desk: https://www.amazon.com/WireTamer-Cable-Management-Tray-Black/dp/B01BVYW7UY/ref=sr_1_4?keywords=cable+tray&qid=1571879377&sr=8-4

Then screw in a large strip cord to the bottom: https://www.amazon.com/gp/product/B0036DEC48/ref=ppx_yo_dt_b_asin_title_o09_s02?ie=UTF8&psc=1

Some cable clips to top it off (use your favorite style, there are plenty): https://www.amazon.com/gp/product/B075Y9J42T/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

Then run them down the legs from the bottom of the desk, just use Velcro straps or something :)

​

Here are both of my main setups using only those products: https://imgur.com/a/67TxbQQ

Don't let this hooligans fool ya. LED's are awesome, more screens the better. I'm not sure if you use that box as a foot stool but if not you should move it so you have room for your feet.

1. As someone else said move the LED strip to the back of your desk.
   
   
   
2. Again as someone else said move that one speaker to the correct side. However, you don't need to discard a monitor for that. Just put it behind where the monitors meet. So long as the speaker isn't covered too much it shouldn't hinder sound coming out of it. Heck, if you wanted you could lay the speaker on its side. I'm not much of an audiophile and don't have those speakers so your mileage may vary. Are those speakers hooked up to a stereo, computer, or maybe a DAC? If it's a DAC then you could easily mount that to the underside of the desk with some double sided tape or Velcro tape. I prefer Velcro tape myself.
   
   
   
3. Once more, as someone said mount those headphone somewhere when you're not using them. Seems you have space to the left of your desk for that. If you like using that space yourself then you could just mount a holder on the underside of your desk. They're super cheap on Amazon, and anything like this will work fine.
   
   
   
4. It's hard to see how much cable clutter you have. Best thing you can do is bundle as many cables together as possible. A good way to do this is with veclro ties. The more peripherals you get the more cables you have. Some will have their own power bricks and some will have cable length as if you were supposed to use the thing in another room. To deter this I would recommend cable trays to mount to the bottom of the desk. One other thing that can help for cable management is a cable sleeve which is helpful for tiding up those cables as they go to your PC.
   
   
   
5. Basically mount anything and everything you can to the bottom of your desk to hide as much as possible from view.

I had a similar tangle underneath my work area. you could try something like these:
organizer / tamer to put under the desk,
a box for your surge protector, and
short extenders for power cables to help them all fit in your surge protector

are these kinda what you got below in the back of the desk? https://www.amazon.com/gp/product/B01BVYW7UY/ref=ox_sc_sfl_title_2?ie=UTF8&psc=1&smid=A3EETXTBXHSS6Z

I wanted to share a couple pictures of the desk set up and also some of the accessories I purchased. My expirience with Fully was great. I got the Jarvis3 with Walnut veneer in a72x60 size. The frame was delivered about 3 days later and the desk top about a week after purchase. The quality is everything I expected! This thing is heavy and stable at all heights. I love this desk!

Pics:
https://drive.google.com/file/d/1E7Vi_PN-sxrfnujw9ZgXZTnQwUT8dTyeLA/view?usp=sharing

https://drive.google.com/file/d/1LBK9sdiy9oULc-dOgY7ElnAcd45jkCCloQ/view?usp=sharing

https://drive.google.com/file/d/1L56J3IP3A9cVEiPSgyNNANwCjJIY4P3blA/view?usp=sharing

https://drive.google.com/file/d/1N0TaD-U1OJlcw7mq8sihXH_obmELsdRv6A/view?usp=sharing

https://drive.google.com/file/d/1Mw-c-78JU_MAIraOlL56jLZuFK-l0lQMDA/view?usp=sharing

Accessories
I decided to get the keyboard tray and accessories from Amazon. The keyboard tray is probably going back because it is difficult to move back and forth.
Keyboard Tray Here: https://www.amazon.com/gp/product/B01M2319VR/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1

The Anchor: https://www.amazon.com/gp/product/B00P31BMHG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Wiretamers: https://www.amazon.com/gp/product/B01BVYW7UY/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

VESA adapter for old Samsung Monitor: https://www.amazon.com/gp/product/B071YFDQKS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Dual Monitor Mount: https://www.amazon.com/gp/product/B018MSDG84/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Clips for wire management: https://www.amazon.com/gp/product/B071L91LBH/ref=oh_aui_detailpage_o03_s02?ie=UTF8&psc=1

Long Power strip: https://www.amazon.com/gp/product/B0036DEC48/ref=oh_aui_detailpage_o03_s03?ie=UTF8&psc=1

You can grab a J-tray to put under the desk to help manage all of the slack in the cables. I have these under my desk and they work really well.

VELCRO Brand - ONE WRAP Thin Ties, 8 x 1/2-Inch, 100 Count, Black https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_apa_i_SphaBbVD4R8ZR

WireTamer Cable Management Tray (2 Pack, Black) https://www.amazon.com/dp/B01BVYW7UY/ref=cm_sw_r_cp_apa_i_-rhaBbAYX7GVF


I used these two of Amazon to make all my cables disappear and for pretty cheap 30$. Both products are amazing I've for no issues with either one. Good luck hope this helped.

These little trays are even better. Easy to install with a standard drill, and they'll hold a surge protector and all the plugs. https://www.amazon.com/dp/B01BVYW7UY/

Also, I love these reusable tie thingies. You can double them up for big cable bundles. https://www.amazon.com/dp/B01M7TAL4F/

This also works https://www.amazon.com/dp/B01BVYW7UY/ref=cm_sw_r_cp_awdb_t1_gAbJAbJPAAYKV

-cable tray(s) $22 - perfect for screwing into a think desk like yours, power strips can live in here as well

-nylon/velcro ties $7 - possibly cheaper at your local hardware store

With kush white walls like that a lil cable management might improve how you feel walking in every day!

Nice setup. Foot warmer could use some RGB tho

Yeah the following items will help out a lot.

• https://www.amazon.com/WireTamer-Cable-Management-Tray-Black/dp/B01BVYW7UY
  
• https://www.amazon.com/Management-Sleeve-JOTO-Computer-Entertainment/dp/B015HWXG4M/ref=pd_bxgy_229_img_2?_encoding=UTF8&psc=1&refRID=1YKZDMRV596SCWR6PSGE
  
• https://www.amazon.com/Reusable-Fastening-Organizer-Holder-Laptop/dp/B0154MS9Q0/ref=pd_bxgy_229_img_3?_encoding=UTF8&psc=1&refRID=1YKZDMRV596SCWR6PSGE
  

put monitors on one side, tower on the other. Or put the monitors on one side, tower in the middle, and controllers/headset/mic/etc. on the other side. I'm using these to hold power strips, it's only going to work for the long skinny ones though. IKEA has one that can hold a wider variety of sizes. Based on the shadow and graininess of the pic I am guessing you only have a ceiling light? You could add a lamp on one side and one of these on the other. If you want to continue with the green color scheme, you could get one of these orb things and an rgb led strip

Yes some are rolled up and tied together. I think most of them are a decent length so I don't need to extend em. I'll look for that IKEA thing in a bit but what I have so far is this from Amazon that works but I think is a bit short, though it came with two. I'll the try the mic position, looks like a good spot.

I have these under my desk

https://www.amazon.com/dp/B01BVYW7UY/ref=cm_sw_r_cp_awdb_t1_o6CRDbQ8HP2E5

super easy to do just with 3M Velcro strips attached under the table.

Add some wire sleeves and your good to enjoy the clutter free view.

If you're able to attach something like this | https://www.amazon.com/WireTamer-Cable-Management-Tray-Black/dp/B01BVYW7UY/ref=sr_1_8?s=electronics&ie=UTF8&qid=1485910978&sr=1-8&keywords=cable+raceway | to your desk then you would be able hide all the cables on the underside of the desk and you would also be able to place your power strip in it depending on the size. If I was you then I would orient the desktop so that the cables coming from the back are facing the wall but I completely understand if you want to display the inside of your system , so if you're going to keep it in that orientation then I would also get some cable sleeving of some sort such as | https://www.amazon.com/Bluelounge-SB-BL-Cable-Director-Black/dp/B00MXC4T7S/ref=pd_sim_229_55?_encoding=UTF8&psc=1&refRID=WPPWJ0E7AQ1CCYKYZ2JF |
so that all your cables are in one neat strand.

Tape or screw the power strip to the bottom of the desk and add cable trays (I have these) to the bottom of the desk so you have somewhere to tuck any extra length. Use cable clips of some sort (like these or these or these) to keep cable runs tidy and in place. If you have cables that you need to bundle together or keep folded, use reusable cable ties like this and avoid using zip ties since they're single-use and can damage cables if they're over-tightened.

If you have cables that you might want to remove from time to time, like for peripherals, then you should avoid bundling them with everything else. Might seem obvious, but I thought I'd throw it out there since I've made that mistake before with my keyboard and mouse.

Hope this helps.

I've got these mounted to my desk. Not fully enclosed, but ended up being clean enough for me.