Reddit mentions: The best mobility & daily living aids

We found 2,081 Reddit comments discussing the best mobility & daily living aids. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 815 products and ranked them based on the amount of positive reactions they received. Here are the top 20.

3. InteVision Foam Bed Wedge Pillow (25" x 24" x 12") & Headrest Pillow in ONE Package - 2" Memory Foam Top - Helps Relief for Acid Reflux, Post Surgery, Snoring, and Back Pain

    Features:
  • Two Layer Design plus an adjustable Cooling Gel memory foam headrest pillow in one package: This latest version is made of 2-INCH Cooling Gel memory foam layer on top of a firm base foam, also adding a height-adjustable Cooling Gel memory foam headrest to provide better support for your neck and head. The end result is the most comfortable wedge pillow system on the market. U.S. Patented
  • Designed to help patients with acid reflux, snoring, allergies, or any other condition which breathing may be impaired in supine position
  • It can also be used when you are recommeded by a health professional to sleep in an elevated position after surgery. It helps reduce back pain, providing a healthy, more comfortable night's sleep.
  • Comes with a machine-washable, high quality cover (Size: 25" x 24" x 12"). Note: based on the number of people who want to purchase extra pillowcases for this wedge pillow, we have released an optional 400 thread count, 100% Egyptian cotton pillowcase on Amazon (sold separately and available on Amazon).
  • Every product comes with the trademark InteVision on its packaging (Net product weight: 4.7 lbs). Note: this wedge pillow is placed in a vacuum sealed package. It will regain its intended shape after opening the package.
InteVision Foam Bed Wedge Pillow (25" x 24" x 12") & Headrest Pillow in ONE Package - 2" Memory Foam Top - Helps Relief for Acid Reflux, Post Surgery, Snoring, and Back Pain
Specs:
ColorWhite
Height12 Inches
Length25 Inches
Number of items1
Size25x24x12 Inch (Pack of 1)
Weight5 Pounds
Width24 Inches
▼ Read Reddit mentions

18. MagniPros LED Illuminated Headband Magnifier Visor with Bonus Cleaning Cloth and 5 Detachable Lenses 1X, 1.5X, 2X, 2.5X 3.5X - (Upgraded Version) Hands-Free Head Worn Lighted Magnifying Glass

    Features:
  • ✔ 5 DISTORTION FREE INTERCHANGEABLE MAGNIFYING LENSES - Switch between 5 optical grade optical lenses using a simple click and release system. Magnification power: 1X, 1.5X, 2X, 2.5X, 3.5X
  • ✔ COMFORTABLE AND STYLISH: You can put this head mount magnifier on your head like a pair of glasses. Ergonomic frame design. Mirror leg can be removed and changed to elastic band. This headband magnifier glasses has a very light weigh so that you would not feel any burdened or uncomfortable.
  • ✔ VERSATILE: The individual lenses /magnifying lenses can be easily assembled and dismantled.Perfect headset magnifier for close up work like dentists,electricians,jewelers,sewing,crafts,beauty,painting and the elderly.
  • ✔ DUAL HEADBAND WEARING MODES & ADJUSTABLE LED LIGHTS: Alternate between wearing it as glasses or headband. The included head strap can be attached with ease to ensure a more secure fit. The movable head magnifier lens slot can adjust the distance between your eyes and lens for different needs to ensure accurate irradiation of light source on the surface of viewed object ,making it more convenient in use. This magnifying glass lamp can be used as a headlamp at night.
  • ✔ ULTRA BRIGHT HEADLIGHTS: Two energy-efficient LEDs with rotatable angle; turn on or off with a simple switch on the top of the headset (Batteries NOT included)
MagniPros LED Illuminated Headband Magnifier Visor with Bonus Cleaning Cloth and 5 Detachable Lenses 1X, 1.5X, 2X, 2.5X 3.5X - (Upgraded Version) Hands-Free Head Worn Lighted Magnifying Glass
Specs:
ColorWhite
Height3.5 Inches
Length9 Inches
Number of items1
Size1 Count (Pack of 1)
Weight0.6 Pounds
Width5.8 Inches
▼ Read Reddit mentions

🎓 Reddit experts on mobility & daily living aids

The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where mobility & daily living aids are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Total score: 66
Number of comments: 6
Relevant subreddits: 2
Total score: 43
Number of comments: 7
Relevant subreddits: 2
Total score: 27
Number of comments: 5
Relevant subreddits: 1
Total score: 27
Number of comments: 4
Relevant subreddits: 1
Total score: 26
Number of comments: 5
Relevant subreddits: 3
Total score: 11
Number of comments: 8
Relevant subreddits: 5
Total score: 11
Number of comments: 5
Relevant subreddits: 1
Total score: 10
Number of comments: 6
Relevant subreddits: 3
Total score: 6
Number of comments: 8
Relevant subreddits: 1
Total score: 6
Number of comments: 6
Relevant subreddits: 1

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Top Reddit comments about Mobility & Daily Living Aids:

u/CommercialPilot · 2 pointsr/Watches

A good place to get started is by watching videos on YouTube. There are several 25+ minute long videos of people disassembling, servicing, and reassembling pocket watches. Once you have watched some videos, then you can start google searching about watch repair for more information. Things such as how to properly oil a watch. The names of different components, how to put a watch "in beat", etc. The message boards at NAWCC.com are a GREAT help. Read, read, read. Study. If after you do this and still want to get into the hobby then read further. I have to note that you must be mechanically adept to do this. You'll need to be able to observe a mechanism and deduce exactly how it works. This is how you solve a problem that a timepiece may have.

Honestly, a lot of the "Getting started" guides out there recommend spending thousands of dollars on tools. 30 dollars for one single screwdriver, 300 dollars for this, that, etc. If you're wealthy, then go for it! The expensive tools are great, but it's not necessary to service movements that are worth less than a couple hundred bucks for hobby. I'm very financially poor, so I had to shop around for the least expensive tools I could find. Here are some of the tools I use. I did purchase them from amazon. You won't be able to do all repairs with these tools. There are repairs that will be a bit out of reach, such as balance staff replacement and component fabrications.

1)Screwdriver set. I get a ton of use out of these. They're Chinese made, but they work perfectly fine. Definitely a must.
http://www.amazon.com/gp/product/B00JPXW0N8/

2) Magnifying eyeglasses. LED illuminated. I cannot live without mine, it really works great and takes regular AAA batteries. Human hands are capable of very fine motor movements, what limits us is our eyes. Watchmaking requires steady hands, and for that you'll need to see up close.
http://www.amazon.com/gp/product/B003UCODIA/

3)Movement holder. This is self explanatory.
http://www.amazon.com/gp/product/B005URKGDO/

4)Brass tweezers. You will need these to insert screws for installation, various pins, etc. Brass is a softer metal, and thus makes it less prone to scratch/damage steel parts such as the threads of screws. Learning to use tweezers can be quite difficult at first. You need to be very light fingered with them. Too much pressure, and your teeny tiny screw/pin/jewel will go flying across the room never to be seen again. Too little pressure, and you will drop the component. It takes practice.
http://www.amazon.com/gp/product/B000RB7C5I/

5)Hand remover. Self explanatory.
http://www.amazon.com/gp/product/B00I02NW82/

6)Watch oil. I use this Liberty brand oil. Seems to do the job just fine, and it's affordable.
http://www.amazon.com/gp/product/B00CM19L5K/

7) Dremel. Harbor Freight sells a knockoff brand dremel for something like 10 bucks. It comes with several attachments. I mostly use mine for buffing cases.

8) Jewelry pliers. They sell these in craft stores and such. Basically a pair of needle nose pliers without teeth on them, they just have smooth round points. These come in handy for removing pins and canon pinions and such that the brass tweezers cannot remove.

9) Several clean cotton cloths. I buy mine at the automotive department in walmart.

10) Goof-Off cleaning solution and a toothbrush. Goof-Off contains a mixture of acetone and xylene. This works great for removing old oil, gunk, and dirt.

11) Toothpicks and a sharp knife. Wood toothpicks work great for pegging/cleaning out jewels and pivots. Sharpen the tip of a toothpick, insert it in said jewel, spin it around a bit, it'll come out gray. Then clean with the chemical solution.

Now you'll want a watch or two to work on. I highly recommend sticking with an 18 size or 16 size movement at first. Larger parts and such makes it easier. You'll be able to find them on eBay. Generally I can find good size 18 movements for 30 to 50 dollars. Sometimes it's a good idea to buy a watch that already runs, but needs fully disassembled and cleaned. That 1898 Hampden 18s 11j in my photo album? I paid $30 for it in an eBay auction. It needed fully disassembled, cleaned, lubricated, mainspring replacement, and the balance put in beat. I knew that if it had a problem which I could not cheaply repair then I could simply resell it and get my $30 or more back. Often times you'll be able to buy entire lots of uncased scrap movements for less than 50 dollars. Having a lot of scrap parts movements around comes very much in handy. Stay away from watches with broken balance staffs for now. If you buy a broken watch that cannot be repaired cheaply, simply resell it on eBay.

Take A LOT of photos while you tear down a watch! Before you start removing screws, take photos on your cell phone. This will help immensely with reassembly.

That's all I can think of now. Getting a bit sleepy so I'm sure I'll think up some more advice tomorrow. I hope watchmaking is still enticing to you after watching some youtube videos, it really is a most rewarding hobby.

u/nutmegtell · 2 pointsr/popping

Gosh, I'm so sorry. If it really is a pilonidal cyst, you need to have the whole area removed. They should have taken the whole thing out the first time. If it is a PC, the recovery may be uncomfortable for a few months, but if you don't take care of it now it will get more painful, and can become infected causing more painful and expensive surgeries.

Here's my free advice (lengthy but worth every penny lol)

-Make sure your surgeon understands what they are talking about, and are current with what these cysts are and treatment. Don't be afraid to get a second opinion. Ask about the length of hospital stay and post op wound care. If they want to suture it closed, get out of there. That's a good way to have a reoccurrence and infection. Which I'm guessing you don't want.

-The wound is basically like taking an ice cream scoop out of your back. It may go to the bone. It will need to be left open and will heal from the inside out. Your body will create 'granular tissue' that fills it in. In a couple of months, skin will grow to cover it. You will NOT have a lasting scar at all!

-They may offer you either 'packing' or a wound Vac. Go for the Wound Vac. It gently pulls your tissue up, and in recent studies it's been shown that the wound will heal the granular tissue faster and with less pain and trauma to that area. They will have them at the hospital, and will give you a portable one for at home. My daughter carried it in a backpack so it wasn't really noticeable. But it does make a farting sound every so often. Not awesome for a 14 y/o shy freshman :/ )

-My husband had his wound packed with gauze (back in 1983). He had to have his mom change it twice a day for 6 weeks. If this is your only option make sure you get strong pain meds. I suggest for the first month or two go to the wound care clinic and have them do it.

While at the hospital:

-Get as much information as you can. Bring someone who can be your advocate. Obviously, in our case, as her mom that was me. It has to be someone who has a cool head and can listen to the care team to process what they are saying to help you. If you don't have a person to help, keep some note cards or a journal next to you and write down all of your questions as they come to you. Make sure they are answered in a way you understand. Don't be afraid to ask more than once or twice. My thoughts on hospital staff- If you're nice, ask the nurses about their families and don't yell at them you'll get much better care. Be assertive but not aggressive.

-Take any and all pain meds you need. It might start with (most likely) morphine, but they have everything available. Don't be afraid to ask. If you have a history of abuse, they can help monitor so you don't get on fragile ground. They gave my daughter an rx for morphine patches, Vicodin and Xanax for wound changes. Because they caused her severe pain but also anxiety. She never needed the patches and she stopped needing the others after two months. She takes a Tylenol or Motrin every few weeks now. Her granular tissue is healed, her skin is getting thicker, but it's still a bit tender.

Post surgery:
You won't be able to sit on your bottom or lie on your back for a few weeks. Get this body pillow - called the Snoogle was recommended by her Physical Therapist while in the hospital. You could get one now, it might help release the pain in your lower back before surgery. It was VERY helpful and worth the trip to the baby store on the way home. These inflatable waffle pads are also great for when you can lay on your back without putting pressure on the coccyx -- and far better than the inflatable doughnuts they give to some people.

You won't be able to get it wet, so get some dry spray shampoo, and you can use these disposable wash cloths to bathe yourself as needed. Showering wasn't too hard, the wound Vac is sealed and I just set it outside the shower while she was in it. Once she was done with the wound Vac and able to shower again the wound care team recommended this tea tree body wash from Trader Joe's .

I have a list of post op necessities, I can post if want (even more) information lol. I figure knowledge is power, so if you go in knowing what you want, what to ask about, and knowing what's coming up, you'll feel more in charge and have control/agency over your own care.

Best of luck, let me know how it goes! Maybe it's not this at all :) 🤞

u/Gungyver · 1 pointr/Gunpla

very nice work on it, im building a near strait build of this same kit and am still finishing up the finer details on the weapons as i got most of the rest of it done. i am just really waiting on my MR. metallics paints i order to get here so i can finish blade as i want to make it into a black blade.

the line work is very nicely done on this mama mobile suit (after all Amida is a mother/hot mom/ word not appropriate for a discussion form that children may see.) what did you use to make them as i use this badass TAMIYA 87154 Tamiya HG Pointed Brush Extra Fine.

after having several problems doing lines with a gundam marker getting clogged up (i did not know you should top coat it first if you paint the kit, and at 29 years of age i was around for the first golden age of mecha kits in the united states, and how i miss those yea it was my first time lining, and i had built around 30 gunpla kits in that golden age and proceeded to break them, repeatedly playing with them but i was between the a immature 13-15 year old at the time. i had also built about 7ish zoid models under my belt as i dont quite remember what ones i had aside form liger zero X and the command wolf.

my gundam gusion rebake test colors was my first time lineing the kit and i didn not know you were supos to topcoat once before doing the lines with a GM(i am just getting a bit of irony form this) so ireally messed up the markers i was using. then i whent and used a gundam brush type marker on a straite build kit i had done and did not like how it turned and i had already bought this bad boyTAMIYA 87154 Tamiya HG Pointed Brush Extra Fine and if it was not both sacrilegious and against my religion i was religion i would paint this brush gold, mount it on an raised stone alter. i would then worship it as if it was the eternal god itself, i would bring animal sacrifices to it as well. but i am being a bit goofy cause my sleep meds are kicking in so i will need to retire soon but i want to finish my critique of your work..

you did a great job posing the you matched the box perfectly and i love the little stand you created for it. what did you use for a top coat? i am planing on looking into more kinds of coating to go with my mettle finish (i like my gundams to be so shiney they blind the enemy as the sun glints off them.

hears a few tips for your next strait build:
first off you should invest in a small amount atleast gold sliver and black paint, with any other color you happen to like. the silver is for the edge of the blade weapons. gold is nice to have around as you can paint the yellow plastics some kits have with it to give it better look the using just using the plastic. you really need to prime these parts first if you paint them, but if your painting the howl kit its a good idea to use primer first. as for the black well you can use it with the god of detail brush i have been talking about in this review
to get great lines on pritty much any kit. but it also serves a more intresting perpose. insted of useing the eye stickers you first paint the eyes black, then using what ever color you prefer that day paint in the eyes, however this does require a magnification device to really do this technique well. i recamend using a head magnafire as you dont have to be carful of bumbing magnafing glass as you work. this is the one i use http://smile.amazon.com/SE-MH1047L-Illuminated-Multi-Power-Magnifier/dp/B003UCODIA?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00


if you end up buying this style i strongly recamend wearing a banana around your head for comfort reasons. magnification also makes doing lines easier.
sorry thins got goofy i cant wait to see what you do next.

u/pianogamer005 · 7 pointsr/snes

To give you a more detailed answer, here's what you'll need:

  • A soldering iron, like this one

  • CR2032 battery holders (I've used [these] (https://m.ebay.com/itm/10pcs-Plastic-CR2032-CR2025-Cell-Button-Lithium-SMD-Lead-Battery-Socket-Holder-/111611684009) successfully in the past)

  • CR2032 batteries (you can find these at just about any grocery store)

  • A 3.8mm Gamebit bit or screwdriver depending on what you already have

  • Some good heat resistant gloves probably

  • Not required (I've so far done all of my own replacements without this) but definitely helpful: a "helping hand" like this one

  • Patience

    If you're at all worried about doing this, I can tell you that, having no prior experience to soldering, I've successfully replaced batteries on 8 of my own carts without damaging any of them. You can do it!

  1. Start by taking the two 3.8mm Gamebit screws out of the front of the cartridge and removing the plastic shell. Since you have the board out, now would also be a good time to clean it and the plastic. Use soap and water on the plastic (letting it dry thoroughly) and isopropyl alcohol on the board's gold contracts (where it plugs in).

  2. Heat up your soldering iron by just plugging it in, resting it on its stand, and leaving it for a few minutes. IT WILL GET VERY HOT, DON'T TOUCH IT. To test if it's hot enough, just put your hand near it. You should be able to feel the heat coming off it if it's warm enough.

  3. Begin removing the old battery. Locate it on the board, then find the two corresponding points on the back of the board where it connects. Also, take note of the polarity of the connections; the tab that runs from the top of the battery down is the positive end, the bottom is the negative. Start heating one of the contacts while pulling up on the battery away from the board (this is where those gloves and helping hand come in handy) Once you've got one end out, go for the other one.

  4. Take your battery holder and (if you're buying the ones I linked) bend the tabs so they're perpendicular to the holder itself. I used tweezers to do this. Be careful not to bend too much, or you may snap the metal tab off! (I've done that more than once...) Once you've done that place a fresh battery in the holder

  5. Now comes the hard part: putting the new battery holder in. Remember the orientation the old battery went it, and orient the new one in the same fashion. If you forgot how the old one went in, the two tabs are actually different sizes, so you shouldn't be able to put it in the holes if you've got wrong. Proceed to heat the solder under one of the tabs until it flows again and slide the tab into it. You may have to alternate back and forth to get it in fully, but by the end the holder should sit flush against against the board

  6. Place the board back into the plastic and screw the screws back in. One note about bigger boards (like the Yoshi's island cart you have): some plastic pieces may interfere with the board when you put it back in. One thing you could consider doing to remedy this is using a file to scrape away some of that plastic if you don't mind doing that to a cart or (preferably) the holder. Also something to note, Yoshi's Island and other Super FX carts have metal tabs on the plastic of the cartridge that act as a ground by touching the outside of the cartridge slot. If this isn't placed back properly, your cartridge may not boot, so that's one thing to check if that's the case after reassembly. Now, congratulate yourself. You've done it! Give yourself a pat on the back and get back to gaming. Good luck with 100%! :)
u/jaifriedpork · 1 pointr/Multicopter

This is my iron. There are many like it, but this one is mine. It's not a great iron, it's a good enough iron, and you can get replacement tips pretty cheap. (I'm actually wanting to upgrade to a $150 Weller, but my iron still works fine. I want better heat control and thermal capacity, but this is one of those "if you can't explain why you need it, you don't need it yet" things.) I also bought this tip cleaner on the same order apparently, I prefer it to a sponge but it's not necessary.

This is the solder I bought most recently. It's honestly a little on the thick side, and multi-core would be better, but it was cheap and works fine. Without the rosin, you'd need flux; they etch the metal to remove the oxide layer that naturally forms and would inhibit a good joint. Thin solder melts faster and gives you more control over how much you apply.

There's other stuff that isn't strictly necessary, but is useful. I have a heat antistatic may on my work bench, and a cheap fume extractor set up behind it; I won't bother linking it because it doesn't have any kind of filter in it. The rosin smoke and the lead are both kinda toxic, so a well-ventilated area and/or a good fume extractor are important. I also keep flux paste, desoldering wick, a solder sucker, and a set of helping hands on my workbench, but I use all that stuff because I do a fair bit of electronics work, YMMV.

For references, Dave of EEVBlog fame has a three part tutorial on soldering which covers all the bases pretty well. He'll also leave you saying "sohldah" instead of "sodder," which is a fun way to annoy American EEs.

Edit: This is my workbench, for reference since I'm in that room right now. There's heat shrink on the helping hands, a trick I straight up stole from /u/bulbufet. It keeps the alligator clips from digging into wires, though the heat shrink has to be replaced periodically as the teeth will eventually work their way through it. And if you don't want to slap together a solder holder out of MDF, you can buy them, but where's the fun in that?

u/HeyItsJay · 3 pointsr/Watches

I bought all my materials from Amazon and I've done about 3 Mods.

Heres a little documentation of my 1st one.

Seiko 5 Mod; PAM Cali Dial & Sword Hands & some more photos

Some things that I suggest you get before starting.

  • Magnifier Opposed to a Loupe this works well and is rather convenient with 3 magnifications

  • Precision Tweezers You need, need this. Seriously

  • Crystal Press Self explanatory

  • Dust Blower Often times you get dust on your dial while it sits, so get this to get rid of it

  • Hand Press I don't particularly like the hand remover included but it does the job just fine

  • Cushioned Holder I used this to hold the movement taking it out of the case

  • Silicone Grease Used to grease the gaskets for increased water resistance

  • Caseback Ball One of the best things you can get to be honest, it removes most casebacks

  • Movement Holder To uhh, hold the movement

  • Precision Screwdrivers You need this to unscrew the movement from the holders, also good tool to use for when you take apart movements to learn

  • Hypo Cement Used this for bezel attachments for when you change em up

    Let me know if you've any questions, I'd be willing to help you out and answer them to the best of my ability :)

    Cheers!
u/thewhiskeyqueen · 3 pointsr/ElectricForest

For your first time I would recommend trying GA at least once. There's a whole different vibe there and there's a sense of community that's pretty fun. The walk to the venue can be long if you're camped far out, but if you plan to just stay in the venue for most of your time aside from sleeping and getting ready for the day then it's not really a big deal. I always rent a locker ($50 for the whole weekend) and keep a hoodie/blanket/hammock/etc in there so I don't have to carry a bunch of stuff around. You can also charge your phone at the locker stations so that's nice. It's definitely worth the money.
There's also a water park where you can shower (and play in the water and eat 🙂) if you decide to go the GA route and don't want to deal with the gross (and apparently cold) GA showers. $20 for a day pass and there's a shuttle that takes you to and from the campgrounds.
Baby wipes are a must. Bring more than you think you'll need - this year when it rained they were a life saver to use before bed to clean our feet and legs off. You can also get body wipes (https://www.amazon.com/gp/product/B001G7Z0RO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 these worked well) and use them at the end of the night if you need to feel clean before going to bed.
If you use Facebook just like Electric Forest and you'll be able to see when wristbands go on sale and when they announce the lineups. The EF website has a lot of helpful information too so just peruse around there. There's even a FAQ section.
I hope this is helpful. Welcome to the fam 🙃

u/Heretic_Tom · 6 pointsr/minipainting

I find this light to be very effective, not to mention pretty cheap, and I like that it has a few different "temperatures" of light and has more than enough flexibility for me to get it in just the right spot.

​

I also rely heavily on this head magnifier as my vision isn't what it once was. It's super cheap and works great.

​

I find that Army Painter brushes work really well and cost much less than most of the other brushes I like. I particularly like their detail brushes. I don't think I could paint eyes without my beloved "The Psycho" brush.

​

I love this light box. Also very cheap (noticing a trend, I'm always looking for a deal, lol). These acrylic display boards fit nicely inside the light box and give photos a cool, polished look.

u/Indie59 · 4 pointsr/diyaudio

You really need a set of helping hands or a vise or something. Trying to hold everything in place, control an iron and control the solder is a challenge without it. In a pinch I have used my feet as a quick clamp, but I wouldn't recommend it.

Secondly, properly prepare your wire. You only need to expose about 1/8" or so of bare wire. make sure you have a nice twist on each bare cable, and if necessary, go ahead and apply solder to it so it stays together. I do t usually like to do this personally, because it makes the end too rigid and difficult to maneuver at times, but sometimes it is necessary to keep the wire and connection clean.
Also, with TRS jacks, you want to trim the shield back a little bit so that everything lines up. (If there is a ton of shield, feel free to trim a little off to make the wire a bit more manageable- you don't have to connect the whole rap to have a good connection.) Use a pair of small pliers to open the strain relief on the jack (the part you were trying to thread through) and bend the shield pin down a bit if necessary.

As far a flux, hopefully you have rosin core 65/35 or 60/40 lead solder (I still don't trust the lead-free stuff); if you do then the flux isn't really necessary. The rosin core contains flux, which has a lower melting point than solder, so flux is applied by the iron heating solder on the surface. There are occasions when the solder type or the board you're trying to solder to needs a flux coat to prep the surface, but this isn't one of them.

Thirdly, make sure you have a decent iron that gets hot enough, and is properly tined. You should have a little solder on the tip (that is shiny) so that heat is properly transferred to the surface. Make sure you apply the iron to both the cable and the surface so both get equally hot. Once you flow solder on them, keep the cable still until the joint cools- it should also look shiny when done, (if it looks really dull, you have a cold joint, and need to reheat it.

Clamp the strain relief down on the cable and seal it up (I hope you remembered to put the sleeve and any shrink or cover over the wire before you started soldering..)

I've had to do hundreds of jacks for patchbays and audio cable tielines. You'll get better at it with practice.

u/2capp · 4 pointsr/MechanicalKeyboards

Might be worth getting a solder wick for when you inevitably screw up. Solder vacuum isn't a terrible idea either. I have both, I use them for different things. A third hand is also useful. I find myself using the glass more than the arms but it's all useful. If the iron you buy doesn't come with one a brass ball is great for keeping your tip clean without cooling it off like a sponge will. Micro-cutter is useful, not sure if angled or straight is better, up to you I guess. Last but not least a pair of angled tweezers. You can get those anywhere.

These are all the things I have within arm's reach when I'm doing a project. Have fun!

u/missedsomething · 1 pointr/sexover30

Happy to :)
While we always enjoyed doggy style we do a lot more of it these days.
Also, we picked up a wedge pillow (http://www.amazon.com/gp/product/B009HHLBKK?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s01) and it has been fun. My wife can lay on her back with it under her hips and it is great as it raises her hips and it changes the angle that I enter her and where I hit internally. It also allows us to maintain eye contact. ;) It's also a great position for me to give her oral as I can go for up to an hour without getting a sore neck.
She also likes to lay face down on it with it under her hips. Very similar to doggy but it's a lot easier on her arms.
We love to spoon but entering her while spooning is difficult now. We've compensated by spooning from the waist down which allows penetration and I can still touch her back, arms and face, maintaining a level of connection.
I think the final one that we enjoy is where she lays on her back and I lay on my side next to her, maybe at a 45 degree angle. She raises her leg closest to me, I slide my top leg under her raised leg and extend so that lies on top of or next to her other leg. This allows us me to enter her and get really deep into her.
Another one that we've added is where she lays on her side and moves her top leg forward with her lower leg running parallel to her lower leg. I then straddle her lower leg and slide into her. It's ok for us. I mention it as it's worth trying and I know experiences vary by person.
If I wasn't clear or descriptive enough let me know and I'll try to clarify.
Oh, and one more thing... We added a Hitatchi magic wand and she loves having a non-penetrative vibrator.

u/rvosatka · 1 pointr/arduino

Must:

  1. Variable temp (some times you need it really hot, sometimes hot melts everything or makes all the SMTs start moving- YIKES!)
  2. solder WITH lead - lead free is impossible
  3. rosin core (acid core is not for electronics
    Suggestions:
  4. Get a cheap holder "third hand".
  5. Get a visor magnifier (Like this: http://www.amazon.com/SE-MH1047L-Illuminated-Multipower-Magnifier/dp/B003UCODIA/ref=sr_1_1?ie=UTF8&qid=1405288738&sr=8-1&keywords=visor+magnifier) It makes it MUCH easier to see small solder joints.
  6. Get a "copper scrubber" - like a copper brillo pad. It is the best way to clean tips. If you buy one "especially for soldering" it will be the same thing for 10 times the price.
  7. Get some CELLULOSE sponges (not any other material). Slightly moistened, they can also keep your tip clean. I use the copper scrubber most of the time, though.
  8. Get a "diagonal clipper". Also known as "dikes". Some people say you should spend a lot on a good one; I do not. There also some very light duty versions that are very handy.
  9. Get some paste flux. Use a toothpick to apply to hard to solder things like plugs and jacks (impossible without it).
  10. Get some de-soldering braid. We all make mistakes. Also, there are some techniques where oversoldering then clean-up is the preferred method (tell that to people if they make fun of you ;-) ).
  11. A small fan (like a "muffin fan" from a computer helps keep the fumes out of your face (unless you like them?).
    Enough for now.
    73
u/citizenatlarge · 2 pointsr/woahdude

Samsung Galaxy Note 3 camera module replacement

I just replaced the wifi module in my wife's Note 2.. The Logic Board (aka- motherboard) in mine.. and then had to finally find a replacement for (b/c the connector ripped the male contact off of the logic board inside of the wire's female connector and I couldn't get it out.. super tiny shit) and install the USB/Cell Antenna cable in my Note 2.. With the tools, patience, PARTS lol, and instructions, you don't need a new phone as often as you'd think ;)

Total cost.. About $50 for all of those parts on ebay and ifixit-(which is expensive, but it's quick and reliable.. the bad cable I got was from them, and they replaced it free w/o a return of the faulty one) The tools aren't that much either.. ifixit has their stuff overpriced.. just find them elsewhere.. then, just watch a lot of videos, and go slow.

Did you know? you can use 2x magnifying lenses held at just the right distances from each other to create a MUCH more powerful magnification? I use a set of Helping Hands (not the best design btw) and then use a smaller magnifying glass held by one of the alligator clips held infront of the larger one to make a laymans microscope..

Here's an example of how I have mine setup.. This is an old RadioShack version that I paid waaaaay too much for back before I used the net lol.. Like $40?? I think ughh.. Pretty sure there's better for less now.

Shit.. I just reread what your issue was and it's the Vibration lmao.. I'm sorry, bit tipsy but I'm leaving all of that above. Did you try this?

u/mudcelt · 19 pointsr/sex

what about a sex wedge? There are some cheap varriations on Amazon, like this one. It might help her open her hips.

This might not work for her, but what I thought of when I read your post was restorative yoga, which is basically about putting your body into poses that are supported by blankets and pillows and allowing yourself to open up your hips and shoulders. Obviously I don't know anything about her level of mobility, but if you think she could benefit from it, maybe this book and a commitment to help her with it might increase your intimacy AND help her become more flexible and comfortable.

u/stonedeng · 5 pointsr/AskElectronics

I don't have any suggestions on soldering irons, but I do recommend a brass wire sponge over a regular sponge for tip cleaning.

They work great and don't require any water. I personally feel they are better for your iron tip and don't get nasty like a sponge can.

Something like this http://www.amazon.com/gp/aw/d/B000PDQORU/ref=mp_s_a_1_3?qid=1373850851&sr=8-3&pi=AC_SX112_SY192


Edit: that weller above that you listed is a good iron. Because you are doing SMD as well I would also recommend a solder sucker, as I call them ha.

This here http://www.amazon.com/gp/aw/d/B0002KRAAG/ref=mp_s_a_1_1?qid=1373851104&sr=8-1&pi=AC_SX112_SY192

Helps a ton if you get solder is the wrong place or need to take some off or out of a through hole.

Lastly, these third hands can be a life saver at times if you will be working alone often. http://www.amazon.com/gp/aw/d/B000RB38X8/ref=pd_aw_sim_indust_2?pi=SL500_SY115

Good luck!

u/z2amiller · 2 pointsr/AskElectronics

I've been lusting after a microscope for a while, but can't (yet!) justify the cost (or the space it would take up on my already crowded desk).

Have you looked into OptiVisors at all? I recently purchased the Optivisor DA-3, which is 1.75x magnification with a 14 inch working distance, and a DA-6 which is 2.75x with a 6 inch working distance. I also got the LED Light for the Optivisor which mounts cleanly around the lenses.

I'm sure this solution is not as good as having a microscope, but it is less expensive, compact, and pretty flexible. I'm happy with the DA-3 model for day to day hand soldering (0603 passives, sot-23-6, etc), and I've used the DA-6 a few times for really close up inspection.
So far I've worn it for as long as 90 minutes at a time and it was comfortable to wear for that long.

Note that the DA-X models use glass lenses, and are very clear and distortion free. Apparently the same company makes a line of less expensive visors with plastic lenses that aren't as good (LX series, maybe?).

u/lowpricedalternative · 1 pointr/technology

> if I were rich I'd have a special squatting toilet.

You no longer have to be rich! Introducing the Go S 9000 from Advanced Toilet Innovations LLC! With the Go S 9000, you too can own your very own special squatting toilet! But wait there's more, your new squatting toilet works just like your old non-squatting toilet! That's right folks, you heard it here first! You get two toilets in one! That's twice the value of a regular toilet! But wait, there's more! You don't even have to call a plumber to install your new dual function toilet of the future! You've just saved hundreds of dollars in expensive plumbing bills! But wait, there's more! If you act now, you can reduce the chances of colon cancer and hemorrhoids! That's right folks, you can save tens of thousands of dollars in unnecessary medical bills but only if you act now! Don't waste your money on products that don't work like these expensive "colon cleansers" that leave you feeling less than satisfied! Join the future today! Order the Clear S 9000 now and you'll get not one, not two, not three, not even five, but six rolls of VitaloeSoft bathroom tissue. VitaloeSoft by Advanced Toilet Innovations LLC is the only bathroom tissue infused with 15 vitamins and minerals and cool refreshing, moisturizing aloe! Hurry and order now!

http://www.amazon.com/Squatty-Potty-Ecco-Toilet-Stool/dp/B007BISCT0

gostool.com/store/

http://www.lillipad.co.nz/

http://naturesplatform.com/

http://www.ginacor.com/

http://www.alibaba.com/product-gs/1261632233/nonslip_plastic_toilet_step_stool_squatting.html?s=p

http://www.alibaba.com/product-gs/1012025170/Plastic_bathroom_step_stool_nonslip_toilet.html

Clearly, such an advanced device cannot be made by yourself either.

u/dfnkt · 2 pointsr/EliteDangerous

Look up some tutorials on youtube. A good iron makes a world of difference. I struggled with properly tinning all the irons I've used previously which were just those cheap $8 dollar irons from like walmart. The weller that was in my dad's stuff wasn't much more expensive but they make quality stuff.

The tip tinned very well and everything was fairly smooth. If you don't have a decent stock of soldering supplies I would purchase them before you start.

Here's a quick rundown of what I would recommend:

Simple Weller Soldering Iron

Helping Hands

Desolder Wick

Kester .03" solder

Having the desolder wick saved me a few times when I had some bad flow from the parts not having adequate heat and the solder just clumping on the pin rather than flowing into the connection. You just lay the braid over the solder and press your iron on top and it will soak the solder into the braid and leave your parts clean. You'll probably want something to clean your solder iron tip with. You can buy a Hakko cleaning stand with wire brush for $10 on amazon or you can just wet a scotch brite pad you buy from walmart for a few dollars.

You can use solder you already have if it's a small enough diameter. You want small diameter so that when you touch it to the part (not to the iron) it melts quickly and you dont have to continue to apply heat to the parts. As far as actually handling the solder while you're trying to work I like to cut a small length of solder, maybe 6-8 inches and then wind it in a mini spool around my pinkie finger and leave a length of it sticking out so you have something to hold on to that will give you good control.

How-To Solder Instructable

Once you make the connections look at them, a good connection should typically be shiny and not cloudy. It's likely overkill for this project but those are good practices.

u/shyphoenix · 2 pointsr/sexover30

Liberator has foam ramps:

https://www.liberator.com/

and look there's a 30 % off sale this weekend!!! With the code GOBIG

https://www.liberator.com/wedge.html

this is the wedge...I think it would be great for you guys, since you're beginners -- If you scroll down, there's a scrolling bar of sex positions that they recommend with the wedge... the standing ovation will likely work well for you guys! The elevated wheel barrow ... really I'm betting the wedge will help you tons.

If you don't want to pay 90 for this pillow, there's this: https://www.amazon.com/InteVision-Wedge-Pillow-Quality-Removable/dp/B009HHLBKK/ref=sr_1_1_a_it?ie=UTF8&qid=1467501998&sr=8-1&keywords=sex+position+pillow

on amazon. its 40 bucks.. however I can't attest to quality, since I don't own it.

On stretching... this is pretty big, especially for women as having wider, more open access will make penetration easier for you and more pleasurable for her. Obviously, she doesn't need to be doing the splits here. But I agree that a little bit of extra flexibility will help a ton. Doing a little bit of stretching during foreplay will also help keep those muscles from cramping up ;)


u/nailpolishbonfire · 6 pointsr/SkincareAddiction

Whatever works best for him; I would always wash my shoulders with my hands in the shower, so if he can get some cleanser on a soft brush in the shower that will make it easier to rinse off. I just found this on Amazon and it looks like it would be a nice gentle scrubber. Apparently they even make things to help you put lotion on your back!

By "don't overdo it," I mean the exfoliants I linked to are pretty high-strength, so even though it's his back and not his face you'll want to take care not to do it too often or it will probably dry out his skin and make some things worse (I can't say how often would be best, it will just be trial and error). Paula's Choice sells more gentle, lower-concentration exfoliants if the ones I linked are too hard on his skin.

u/foxytit · 1 pointr/Blind

20x?!! Are you sure she's using a true 20x loupe? If you picked up a cheap loupe online, chances are, it's not a 20x. For instance: http://www.amazon.com/SE-Loupe-LED-Illuminated-21mm/dp/B0013E3DAG => advertised to be 20x, but turns out to be ~5.5x.

I would recommend first figuring out the minimum magnification power your wife needs to read small text. Reason: There is an inverse relationship between magnification power, and depth of field and field of view. Meaning, there is no 20x magnifier that can give you a huge field of view (I have a true 20x, and dear god, it is useless to me since it can only view about 1 character at a time).

Here's an example of the tradeoff: I own several Donegan OptiVISOR headband magnifiers. At first, I ordered their most powerful model, the 3.5x. The 3.5x has a focal length of 4", and a depth of field of about 1". This means, in order for me to have a clear image of what I'm observing, I need to make sure I maintain a 3" to 5" distance between the lens and the item under observation; it was just exhausting.

After trial and error, I ended up with the the 1.75x. It has a focal length of 14", and a depth of field of about 4". Which means, I can keep the item under observation at a distance of 10" - 18", which is much more forgiving.

In case you're interested in the headband magnifier: http://www.amazon.com/Donegan-OptiVisor-Headband-Magnifier-Magnification/dp/B0068OSIIS/

u/chinesefatwoman · 1 pointr/diypedals

I just went over to it and picked it up and was surprised by how light it is. I think the wider base gives it better stability than the old one I was using but the old one might actually be heavier. I just weighed them, the new one is 13.3 ounces, and the old is 12.2. So not much difference in weight, but the new one sits higher and has the wider base, that makes it more useful to me.

I just remembered this:
https://www.reddit.com/r/diypedals/comments/5fu93u/i_finally_bought_an_oscilloscope/

The helping hand in that picture might be worth pursuing. Whoever's desk this is has obviously spent a lot of time perfecting his workstation. I'd imagine he's gone through a few helping hands before settling on the one on his current desk.

I will say that this:
https://www.amazon.com/gp/product/B003UCODIA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

has been my single most useful DIY helper....

u/onebat4u · 8 pointsr/starwarscollecting

I want to start off with this very important thing to remember, "take your time" while doing this model there was times I only sat down for a few minutes and times I was there for over an hour.
I would recommend practicing the techniques listed below on the sprues (the frame surrounding the parts of the model)

I over do the details,(lot of it you can't see in the pictures. I post) but I enjoy the painting and get satisfaction off of it, it can be toned down and still look good

I normally look over the book, Google the characters/vehicle down load multiple pictures to refer to and get an idea what colors I want before getting started. I also watch YouTube videos to see if there is something difficult I need to be aware of.

Sometimes it is easier to paint some of the details while the parts are still on the sprues, see the black in the chest plates I painted them before I cut them loose, it was easier to do them that way. But I always waited until I put section together (ex: chest, waste , arms , legs and head) to do the wash "weathering" this way they all blend together. With this one, I want it to look more weathered at the bottom and less as it went up

Some definitions:


Wash "weathering" this is how I made the "dirty look" i did not let it set for 10 mins. I applied small sections and wiped off what I did not want with a Q-tip. The darker parts, I just applied small amounts with with a fine tip brush.

Dry brush

As you can see here Dry brushing really gives the look of age /worn out.
you would be better off going to the link I provided and watching a few videos.

Variety of brushesif you buy the dirt cheap brushes, you will get a cheap paint job. The ones I linked are a good set to start with, they give you a wide variety of choices. Main thing to do is CLEAN...CLEAN CLEAN...them after each use. With thinner and soapy water. Do not leave them setting in the thinner or water, the points and edges with get messed up quick. Wipe them off with a paper towel, reform the ends when done.

Magnifing head set is the best way to get the small details, i have this set and they work okay, there are better sets out there.

Hope this helps

u/tehgreyghost · 7 pointsr/leagueoflegends

You just rinse but don't use it on the ACTUAL bits. Since you are using a chemical to dissolve the hair you do need to be careful.

Since the anus, and especially your actual genital skin, is rather sensitive you want to not hurt your self. Spread the nair in a thin is layer across the hair you wish to remove. Though the backdoor is a bit more resilient and it wont be bad if you get a little on the old rusty sheriffs badge . So it's more the front bits to worry about. As long as you are careful and follow the instructions exactly it's all good! :)

EDIT: Make sure to either buy an applicator or get some nitrile gloves to protect your hands. Also I have heard you can use it on your actual junk if you get the sensitive areas stuff, just don't leave it on for longer than instructed.

Also IF you can trim the hair first it helps as it makes the Nair not have to eat through so much hair.

Men's Nair

Applicator

NitrileGloves

Your other options are if you look like Robin Williams chest...like I do are:

A Norelco Bodygroom Electric Razer

Electrolysis

Waxing / Sugaring

u/thejeff79 · 2 pointsr/boardgames

I've just started painting as well, and I'll second that the initial investment is rather high. I'm probably in 50$+ in just painting gear now...

First. Watch some youtube tutorials. I found Miniature Painting 101 by Miniwargamer Jay to be very helpful.

I only went high end on the paints and washes that are my primary color scheme. They're a mix of P3 / Citadel paints. The pots are pricy, but they do go a long way.

I grabbed several brush sets and a 12 pack of basic color acrylic paints from a craft store. You'll want mainly fine tips a a few small flat brushes. These paints are more for mixing (white and black) and areas I only need a little paint.

I used a Krylon white primer for plastics, mainly because I had it. Just use very quick sprays to keep a very light coat.

I built a work-rack out of a piece of 2x6, some large nails, and some nickels as I didn't have the right size washers handy... Drill holes in wood large just enough to hold the nails, super-glue the nickels on top of the nail to give a larger base (I used Gorilla-glue). Then use sticky-tack to hold the miniature on. This lets you use the nail to hold and manuever the miniature during painting, then just set it in the wood to dry... Hopefully this link works:
https://www.facebook.com/photo.php?fbid=10202655502284955&set=pcb.782763288446523&type=1&theater

I got a set of Magnifying goggles from amazon for 8 dollars. Their not the most comfortable things to wear, but they really help with the fine detail work...

http://www.amazon.com/SE-MH1047L-Illuminated-Multipower-Magnifier/dp/B003UCODIA/ref=sr_1_2?ie=UTF8&qid=1407928227&sr=8-2&keywords=magnifying+goggles

Overall, be patient, take your time, and enjoy, and you can make some beautiful pieces of art.

u/unicorndanceparty · 2 pointsr/Random_Acts_Of_Amazon

Becca, you will LOVE this

I think these things are pretty nifty and everyone should own them. Makes getting the last bit of toothpaste out much easier! Plus, it may save you a tiny bit of money because you are utilizing all of the toothpaste :)

Also, this was gifted to me recently and has saved me from the headache of untangling headphones and other such chords. Plus, it has the little clip so that you can easier attach it to your backpack, purse, or jeans.

u/curiouskiwicat · 2 pointsr/newzealand

"NZ invention" is a stretch. Here's one on Amazon for $19.99 (or $213.32 for a pack of 10! ???)

https://www.amazon.com/Squatty-Potty-Original-Bathroom-Toilet/dp/B00ESKVN7W/ref=sr_1_3_a_it?ie=UTF8&qid=1542696554&sr=8-3&keywords=toilet+foot+stool

> "The Original Squatty Potty - Made in U.S.A. As seen on Shark Tank and The Howard Stern Show

> If you are a new squatter, the 7” is a great place to start or if consider yourself an advanced squatter, a 9" Squatty Potty will work best. Younger children should use a 9 inch Squatty Potty while teenagers tend to prefer the 7 inch height

> The Squatty Potty may feel different at first, but the body quickly adjusts and the new healthy way of eliminating quickly becomes second nature

> Doctor recommended / endorsed, Strong & durable, Family-friendly and weight capacity-350 pounds"

Would legit recommend, though!

u/prepping4zombies · 5 pointsr/SleepApnea

Yes, when I started I had it - and it was severe. The first recommendation is in line with your added "note"...the full face works best for me, as it's passive air delivery (vs. something like nasal pillows) and offers a bit more space than a nasal mask.

The main things that helped me were (1) taping my mouth shut, (2) sleeping on a slight incline (this wedge pillow), (3) and sleeping on my back with a firm pillow under my head. Swallowing air was the worst for me when I was on my side, or when I was on my back and tilted my head to one side or the other. So, I conditioned myself to sleep on my back (it was a challenge because I prefer my side) and keep my head straight when I was on my back (like I was staring at the ceiling).

All of that and time help greatly. While you are adapting, take two Gas-X before bed. It's safe to take every night - it won't alleviate the problem, but will make it easier to deal with (lessens the severity and the pain).

edit - try to be mindful of your breathing through the day...if you are a mouth breather, condition yourself to breath through your nose. And, as an added benefit, the full face mask (combined with the heat/humidity from my line) really helped with my nasal congestion issues; if you need to, spray some otc nasal spray (I prefer 4-way) into your nose before you put your mask on at night.

edit 2 - it'll get better with time, and it will be worth it when you start sleeping good!

u/Bullywug · 3 pointsr/minipainting

I love my series 7 #1. It's expensive, but completely worth it.

I just got a magnifying visor with a couple LED lights, and it's been extremely helpful. The lighting is especially nice when I'm just at the kitchen table. Together with the series #7, I can get really fine, accurate strokes.

Liquidtex matte medium has been fun to play with since it lets me thin paint for washes past what you can get with tap water.

u/lonestar-rasbryjamco · 1 pointr/Gloomhaven

You probably want to go back in and clean up your lines a bit. I can see some bleed from the tunic onto the left leg, from the arms onto the bands, and a few other places. Totally normal but I would strongly suggest some jewelry goggles. I use this one personally:

https://www.amazon.com/SE-Illuminated-Dual-Flip-Magnifier/dp/B003UCODIA/ref=sr_1_15?keywords=jewelry+goggles&qid=1565111795&s=gateway&sr=8-15

Other than that good work. The wash and the dry brush on the tunic looks great. You did a great job on the wash and brush on the hands as well.

u/VanBrother1 · 1 pointr/vandwellers

I happen to be a gym rat already so I work out most of the time before showering. But sometimes I get in slumps and don't work out at all. If you're really concerned about appearances, go in the middle of the night. Most Planet Fitness, Anytime Fitness and 24 Hour Fitness are open 24/7. So are many smaller gyms. They give you an access card and you can go when nobody else is there. Also just buy a gym bag with a team logo on it so you look like someone who works out. Don't carry your whole life in your shower bag; make it look like you're there solely to work out and/or shower. If you take a hiking backpack in the gym, people may notice! :)

I've noticed some 24 Hour Fitness in Colorado and San Diego have no shower curtains; LA Fitness has partly transparent ones. I avoid those specific locations. Not into voyeurism. But yeah I take my bottle of body wash and shampoo into the shower. I pay my due just like everyone else. Definitely bring all your own stuff and invest $10 in a pair of sandals/flip-flops to wear in the shower.

There are also full-body shower wipes when you simply do not feel like being around a bunch of old, naked dudes talking about sports and politics in the locker room.

http://www.amazon.com/Athletic-Body-Wipes-ShowerPill-10/dp/B0061QL8EE

P.S. I also have a Helio Camp Shower. It has a foot pump for pressures and one of those rinse things to wash with like most sinks have. Works awesome when you're off-grid or boondocking.

http://brianwilkins.org/?p=374

u/Deoxysprime · 5 pointsr/Gunpla

I've built 2 RGs and haven't had any problems due to size or parts being flimsy. I also have big and very shaky hands. Here's my advice:

  • I think we all drop and lose parts from time to time. The best way to handle this is to build in a clean space. Make sure your floor is clean, vacuumed, etc. before you begin. Make sure your lighting is good too!

  • A good pair of tweezers is a godsend when working with small parts. Also consider a helping hand.

  • When making the frame, make sure to gently bend the joints back and forth a bit to loosen them up before putting the armor on them. If you fail to do that and attempt to move the piece before loosening it up, you do risk damaging the part. This is mostly due to the pre-assembled nature of the RG frame.

    RGs are very fun kits that don't take up a lot of shelf space while also looking very impressive. I'm very happy with the ones I've built and I've got a couple more on deck. I highly recommend you try one. People talk up the RG 00 Raiser a lot and I personally built the RG Wing Zero and RG 00 Qan[t] and had few problems with them. (The RG 00 Qan[t] does have a loose V-fin problem so I recommend some plastic cement or glue for that.)
u/niandra3 · 4 pointsr/diypedals

I'm still pretty new to this myself, but like you I have some electronics experience in the past. I just got this Weller 40w iron station with a desolder braid/sucker and a solder tip cleaner. Oh and a more precise tip for the solder iron

I'm really happy with it all so far, and couln't imagine needing more for a while. A heat gun would be nice for de-soldering and reflowing premade boards (like modding Boss pedals), but that can also be done with a regular solder iron as far as I know. You can get the above for about $60 total, so it's a nice way to get your feet wet without a huge investment. Then you gotta add on components/enclosures/pots/switches etc. Maybe get a helping hands and/or circuit holder if you need

Oh and get a good multimeter. I went a step up from the $20 ones and got this one which I'm also really happy with.

u/Koldfuzion · 3 pointsr/3dshacks

Yep you're correct.

When soldering there are a few basic things you have to consider. The main idea is that you want to heat up the wire and the contact point to the point that the solder will "wick" to the parts. You don't want to just melt the solder on the iron itself and have it drizzle on the parts.

Here are some other basic tips I wish I had been told when I was learning to soldering electronics in no logical order:

  • USE A WELL VENTILATED AREA. DO NOT BREATHE IN FUMES!!!! That stuff is really bad for you. Do it in an open garage, or under a kitchen hood.
  • Make sure you use solder with rosin core flux. NOT ACID CORE FLUX. That's for plumbing.
  • Thinner solder is easier to work with, you can always use more.
  1. Use the appropriate size iron for the job or you risk problems like the OP. For something like the 3DS, I'd probably go no bigger than a 35W iron.
  2. You want the solder to look shiny when you're done. If it's dull looking, it's a cold solder point and a bad contact point. Any movement while cooling frequently causes this problem.
  3. One of these makes a huge difference. It's cheap and worth buying if you plan to do much electronics soldering.
  4. Keep your soldering iron tip clean. Frequently wipe it down on a wet paper towel or a wet sponge while using it.
  5. Don't reuse solder. It's cheap, and the flux inside is important to help it flow.
  6. Tin the tip of your iron with solder as well as the wire you plan to solder. It's easier to just hold the tinned wire down with an iron where you need to solder than to use another hand to hold solder.
  7. Don't bother with those gimmicky solder removers to take solder off. Just buy some solder wick and watch it suck all solder off using the solder's wicking action as you hold it on with an iron.

    But most of soldering is just practice. It's a pretty easy skill to get proficient at. After a few projects it'll be almost second nature.
u/alixer · 1 pointr/rit

Until you find a real shower, they make cleansing wipes that do a pretty good job (I use them hiking), so those with a fresh set of clothes could get you by until after your class. https://www.amazon.com/Nathan-Cleansing-Deodorizing-Outdoors-Refreshing/dp/B001CJVK6Q

​

Though I agree, there should be an easily accessible shower for you, good luck :)

u/[deleted] · 2 pointsr/AskReddit

You could buy a few sets of snap circuits for teaching electricity. They have all kinds of neat components and hundreds of project guides, and the kids can design their own circuits to study things like parallel vs. serial, resistors and capacitors, etc. It would let them experiment with electricity and circuit design without having to fool with things like soldering or breadboards, so the projects could easily be done during a single class.

For biology, maybe some good models - skeleton, heart, etc. and charts/diagrams. The same for geology/earth science, get some good rock samples and large diagrams.

If you can't afford/don't want to get everyone microscopes (or maybe even if you do), get some 30x jeweler's loupes for looking at leaves, bugs, rocks, etc. You can get them for about $4/ea.

u/bluejayway327 · 2 pointsr/SkincareAddiction

Sorry I'm so late to respond, but I just got whatever was cheapest on Amazon. I think I have this one:
https://smile.amazon.com/dp/B001D8ZGAM/ref=cm_sw_r_cp_dp_T1_RlSpzb4MP5KC8

I wash it with soap and water after each use or around once a day on beach trips and it has held up really well. The handle gets sticky from holding it with lotioned-up hands, but if you clean it regularly it's not an issue. It's honestly so helpful, even when I'm on vacation with friends and family, because then I don't have to rely on anyone else getting out and drying off to help me get my back covered.

u/yeti_beard · 8 pointsr/Showerthoughts

Let me tell you about the pegleg crutch. It was $150 on Amazon and after my achilles tendon surgery, it was AMAZING! I love this thing with all my heart. I swear this is not an ad, I just really, really loved this crutch.

https://www.amazon.com/iWALK-HFC20001BK-iWALK2-0-Hands-Crutch/dp/B00092RB06

u/DavesNotThere · 2 pointsr/ChronicPain

I love a good ice pack.. It's what use, very cold but doesn't stay cold that long.

Maybe a wedge pillow?.

I waste most of my in-bed time either reading, watching tv/movies or playing Xbox. I don't have a good network to make Facebook worthwhile so I find it hinders more than helps. Best of luck to you both

u/thepensivepoet · 5 pointsr/Guitar

You might make a mess of a switch or pot on your first time around dripping extra solder and shorting out some connections but those are also the cheapest components involved so no sweat if you need to swap something out.

Before you solder you want to make a physical connection first. Twist up the tips of the wire so they're thinner and thread them through the little eye holes on the contact points and bend them over into a hook shape so they're now hanging onto the part before heat gets involved.

Now apply the iron tip to the component where you're going to solder for a second or two to heat it up and touch the solder wire to the component (not just to the iron tip) and it should melt and flow to lock down the physical connection you formed above.

Your biggest danger is mostly going to be burning/melting components by having the iron in contact with them for too long so just work quickly and deliberately and you shouldn't have any issues.

A higher quality iron with variable temperature control should make this easier as the really cheap $10 irons often don't get hot enough to melt cheaper solder quickly so you spend more time pressing the hot tip to the components trying to melt solder and burn up gear.

Don't skimp on tools.

Also wear safety glasses as the last thing you want to do is fling hot solder off a springy wire right into your stupid eyes.

"Helping Hands" tools can be really useful as well. Most of the time when you burn yourself it's when you're doing something that kinda requires more than two hands at once so instead of holding pliers and an iron like chopsticks with solder in your mouth and a row of blisters on your thumb just take a step back and find a smarter way to work.

Oh and just a reminder - metal is a great conductor of heat so if you're putting the iron to a component you'll notice pretty quick if your skin is touching another exposed metal surface of the same component or wire.

u/panascope · 8 pointsr/Warhammer40k

>brushes

If you use GW brushes, get the Standard, Fine Detail, and Wash brushes. These give you a good starting point for most of the stuff you'll be doing. Otherwise you'll want to find similar brushes in other ranges (Windsor & Newton make good brushes). If you go with third-party brushes I think the sizes you'll want are 1, 0, & 3/0.

>mats,

You can get any sort of sewing mat, where it's basically just a piece of rubber you lay on the table. Joann's Fabrics or any sort of sewing store should have this. Here's one I found on Amazon.

>thinners

The paint you're working with is water based, so water will work as a thinner. If you decide to airbrush things that will change what you need but for now, build a wet palette.

>cutters

Try these

>etc

You'll need some glue at the very least. You might also want some helping hands to hold things while you paint them/glue them together.

>is there a site that tells you what colours you need to paint certain colour styles?

I'm not aware of any one site as a catch-all for painting any scheme, but googling things led me to this site that goes into detail about painting Space Wolves. You could also consider this video from Games Workshop where they go through the steps of painting the model.

As for the paints themselves, I'd recommend working with the Vallejo Game Color paint range. They come pre-thinned (extremely helpful for new painters) and convert to Games Workshop colors pretty easily.

Some more hobby stuff to help you get started:

Zenithal Priming

Airbrushing

Object Source Lighting

u/strikkeislandhast · 65 pointsr/TheGirlSurvivalGuide

YES. SO TRUE! My boyfriend and I kept telling ourselves stuff like "they can't be that good, we don't need one, blah blah."

We finally bought one because he saw a sale and we LOVE IT. We also got a squatty potty stool and it is great. The experience of pooping has been transformed. You can get both for like $60 or $70 bucks total on amazon.

Our bidet is this one and I got this squatty potty.

OP, seriously. Bidet. Squatty potty. You won't regret it. Except maybe you will then regret that not every toilet in your life is as richly equipped as the one at home. Pooping elsewhere sucks ):

u/a1blank · 2 pointsr/MechanicalKeyboards

Those are referred to as 3rd hand tools or helping hand tools (this is the one I have). They can be useful, but I don't think they'll be helpful for the ErgoDox kit (haven't actually really done that sort of of soldering, esp the surface mount diodes). They tend to be particularly useful when you're doing through-hole soldering. Here's a video demonstrating some uses of a 3rd hand. Here's another video.

u/EbilSmurfs · 3 pointsr/FemmeThoughts

http://www.amazon.com/Plastic-Squeezer-Toothpaste-Dispenser-Bathroom/dp/B0087FIHDW

You may be a hideous freak, but this should help you no-longer create heinous acts against nature in your bathroom. I can't decide if we need one as well, my wife has done very well at learning how to be a human but I'm worried this one may not stick. She used to not eat cheese or hot wings, and now she appreciates cheeses by themselves, we are still working on getting her to like cheeses with some flavor so we are starting small like Camenbert.

If she can do it I have faith in you.

u/rpg25 · 5 pointsr/Silverbugs

All three can be had for cheap from amazon, which is where I got all mine. Check out the links below... It's the setup I have for even cheaper than I paid (closer to $15). Acid is pretty standard and you can't really get "bad" acid (Gerry Garcia may say otheriwse). The scale has been awesome to me (the reviews on amazon are good too). The loupe is pretty cool and has been pretty helpful. It's just a magnifying glass. As such, it's hard to fuck up.

Acid Test Kit

Scale

Loupe

u/lauraskeez · 1 pointr/Guitar

>You don't need a soldering iron to fix a knob...

Oops, I meant to say that I broke the pot. I tried pulling the knob gently while also rocking it back and forth but I still managed to pull the shaft out of the brand new pot.

Sorry for the confusion; my phone was at 1% so I was typing fast. Perhaps I should have proof-read.
>Electrical work on guitars isn't really maintenance, as you should do it right the first time and never have to worry about it again. Unless you're really into modding and replacing pickups, I wouldn't jump on it.

Haha, I've managed to break an electrical part twice in the past month, and I expect it to happen at least a few more times as my guitar collection grows. I figured it would probably be cheaper and fun to learn how to do it myself.

>A multi angle vice can be very helpful as well.

Like this or this?

u/amaraNT2oo2 · 7 pointsr/EngineeringStudents

Nice - you'll be glad to have that variety of tips, depending on what you are working on! If you have any spare Christmas money, I'd recommend picking up one of these self-adjusting wire strippers - it sort of matches your color scheme too! And if you do a lot of de-soldering (anything with lots of headers or through-hole IC sockets), a desoldering iron can save a ton of time compared to your solder wick and desoldering pump.

A few other things that I've found useful (mostly repairing electronic keyboards / synthesizers, although I'm hoping to get more into Arduino / Pi soon):

Hakko wire cutter

Helping hand

Hemostat / Forceps

Digital multimeter with audible continuity tester

u/piggybankcowboy · 1 pointr/boardgames

Back when I used to paint Warhammer 40k stuff, I found one of these or something similar immensely helpful. I still use them for small electronics projects. The great thing about them is, especially if you have unsteady hands, it allows you more freedom to anchor your arm on the edge of a table or whatever, and the magnifying glass is adjustable so you're able to set up in a comfortable posture.

A can of air (usually used for cleaning keyboards) is nice, too. Give the minis a blast to get any small dust and whatnot off without the potential of leaving tiny fibers from a cloth.

u/shaven_neckbeard · 18 pointsr/sex

My GF and I have been doing this for about 3 years. We liked it so much we bought a wedge pillow from Amazon so we wouldn't be messing with our good sleeping pillows.

We also love using the pillow when she is laying stomach down on the pillow with her vagina just back from the edge and she uses a small vibe on her clit. She cums every time we do this. I think its the ease of access for everything and she doesn't have to support herself while I can go as hard as I want. Definitely recommend!

u/Matir · 2 pointsr/raspberry_pi

Trust me when I say: variable temperature makes a big difference. I have a knockoff of the Hakko 936. The closest thing on amazon.ca is this Aoyue, which I've heard good things about. You don't need hot air as a beginner (or even for most surface mount work), so don't go to the top of the line. You can get cheap rosin core solder to get started. FYI, every set of helping hands like these I have ever owned have been absolute garbage. The vise suggested by /u/rykki will be dramatically more useful, even though it will cost more. (But it might also have applications outside of soldering.)

u/EvilStromboli · 1 pointr/woodworking

Skeleton Challenge: Take a crack at constructing your childhood. https://www.amazon.com/Puzzled-Styracosaurus-Wooden-Puzzle-Construction/dp/B000NQI25G/ref=pd_sim_21_4?ie=UTF8&dpID=61l1DyrUw5L&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=AS8MHR9YY3FVKBJKCG7N

Humidor: Yes its a box, but a really fucking nice, specialty box.

The Scrap Challenge: Small bits, small projects, small works of art.

The Pizza Peel Project: Who doesn't like pizza? Let your creativity run wild!

The Fine Woodworkers Squatty Potty: Don't know what a Squatty Potty is? https://www.amazon.com/Squatty-Potty-Original-Bathroom-Toilet/dp/B00ESKVN7W/ref=sr_1_1_a_it?ie=UTF8&qid=1467259220&sr=8-1&keywords=squatty+potty+toilet+stool Just a stool to help your.......stool. Who wouldn't want a Kona, Walnut and Brazilian Cherry mini stool to put their feet up.

u/frankslan · 1 pointr/electronic_cigarette

http://www.amazon.com/Aoyue-937-Digital-Soldering-Station/dp/B000I30QBW/ref=sr_1_15?ie=UTF8&qid=1395077736&sr=8-15&keywords=soldering+iron

get a good iron, solder, and those magnifier hands. Then just start playing with soldering wire together and then do a project. Search youtube how to solder it's pretty easy. Oh and wear safety glasses sometimes the wire will slip or something weird happens and solder goes flying towards your eyes, better to be safe than sorry.


http://www.amazon.com/SE-MZ101B-Helping-Hands-Magnifying/dp/B000RB38X8/ref=pd_cp_hi_1

u/ELIMS_ROUY_EM_MP · 2 pointsr/sexover30

Can't speak to the liberator but have definitely enjoyed this much cheaper alternative from Amazon: https://www.amazon.com/dp/B00NGKWKS6/ref=cm_sw_r_cp_apa_879XAbNP7KFKM

Good firmness so you can maintain some leverage, but still comfy enough to not be distracting, definitely worth a shot for the price! ($31)

u/Iamacouch · 1 pointr/OpenPV

I just ordered components to make my first box mod, but have done small electrical work before.

Helping Hands will make your life much easier, may not be necessary if you only intend to make one mod.

a decent digital multimeter is required, as is a Soldering iron.

A Breadboard is very useful to ensure everything works as it should, before you have it all finished and put in the case.

those are all I can think of right now, sure there are others people use regularly though


u/shovellovin · 2 pointsr/killteam

My eyesight isn't as good as it used to be and like you I took an approximately 20 year break from painting. I use this - https://www.amazon.com/SE-MH1047L-Illuminated-Flip-Magnifier/dp/B003UCODIA/ref=sr_1_4?ie=UTF8&qid=1540999813&sr=8-4&keywords=jewelers+magnifying+headset

It really helps to see details while painting.

​

As far as the white goes, I'd recommend getting an airbrush. Then you can lay down a nice and smooth white basecoat on a squad in minutes. Then you just have to pick out the details. I used this basic airbrush setup -

https://www.amazon.com/Master-Airbrush-Multi-purpose-Dual-action-Compressor/dp/B001TO578Q/ref=sr_1_7?s=arts-crafts&ie=UTF8&qid=1540999981&sr=1-7&keywords=master+airbrush

​

Welcome back to the hobby! Continue to keep us all in the loop with your progress.

u/totallycouldvehappen · 1 pointr/bikecommuting

Hey I totally understand, I work at a bike shop without a shower and a few of us have had this issue. Unfortunately, I live too far away to bike into work, but a few of us use these, but I've also heard good things about these. Best of luck!

u/totallypromotional · 1 pointr/AskMen

My brother in law went across the country for his bachelor party. He went with his brothers, best friends and his dad (his dad went to keep him out of trouble....)

After a night of going out, the went back to the hotel when my future brother in law had the genius idea to walk to a gas station looking for dip. He decided to take a short cut by going through some yards and jumping the fence. As he put it, he went up like Tarzan and down like Humpty Dumpty.

He shattered his ankle, broke his phone, and had to hobble to the street where a stranger drove him to the hospital. He had to have surgery and screws put into his ankle/foot.

For his wedding, he used a knee crutch. He looked like a pirate. My bridezilla of a sister surprised us all by not freaking out, despite the fact they had spent months on private dance lessons and had an adventurous honeymoon planned.

The bachelor party story was epically hilarious. It just added to it that they had wedding crashers in sports attire come to a black tie wedding. Then the bride and groom overslept the next day and missed their flight for their honeymoon. They lost a day on the island as a result. The whole thing was like a movie.

u/real_good_soups · 1 pointr/brokeabone

Ah man that can’t be fun. I’m sorry to hear that. Crutches are such a pain! Have you heard of a hands free knees crutch? iWALK2.0 Hands Free Knee Crutch - Alternative for Crutches and Knee Scooters - by iWALKFree https://www.amazon.com/dp/B00092RB06/ref=cm_sw_r_cp_api_i_fBQMDbVS25A4Y It’s definitely something i wish i had known about when i broke my ankle! Good luck with your recovery!

u/PhirePhly · 14 pointsr/electronics

I highly recommend the Hakko 936 soldering iron Hakko 888 soldering iron, which is still actually available. It's hard to fathom how a $100 soldering iron could be that much better than a $20 one, but once you start doing anything more serious than just sticking some wires together, it's worth it.

As for other tools,

  • Standard needle nose, dikes, and pliers set
  • Tweezers - Additionally plastic ones if you're going to do PCB etching.
  • Dental Picks - for positioning surface mount parts and pushing wires into molten solder.
  • Wire strippers - You'll often see people using the combo wire stripper / crimpers. They're not as nice as a real pair of strippers.
  • +/-12V power supply for basic analog electronics, 5V for digital work
  • Breadboard
  • Solder sucker - Copper braid is useful for the same thing, but given the choice of the two, I prefer the sucker to undo soldered joints.
  • 30x Jewelers Loupe - Mostly useful for surface mount work, but pretty much all soldering is easier when you're able to look at it.

    As for components, I've been buying them piece-meal for years, so other's will probably be able to yield you a better recommendation for kits than anything I can find just from a quick search. I do mostly digital work, so as far as passives, my main stock is:

  • 0.1uF and 100uF capacitors, 25V
  • 100, 330, 1k, 4.7k, 10k, 100k, 1M resistors

    If I need any other resistor for a specific project, I'll tend to just buy an extra 10 and keep them in labeled coin envelopes.

    Random other pieces:

  • Precut Breadboard jumper wires
  • 7805 - 1A 5V linear regulators
  • 1N4007 diodes
  • 1N4148 small signal diodes
  • 3V linear regulators if you do low power work (MSP430, etc)
  • An Arduino - If not for real projects, I use this a lot to hack together crude digital signal generators to test other chips.
  • LEDs - I found a good deal on bright red ones, but any will do
  • push buttons, power switches, DIP switches (4 in a tiny package that fits in breadboards)
  • Copper clad perf board - To make through-hole projects permanent. Be careful because this also comes without the copper pads, which is just more of a pain in the ass to use.
  • Copper Solder braid

    Edit: Fixed the soldering iron model.

    Disclaimer: I'm using my Amazon Associate links for all of these, which always feel a little amoral and a conflict of interest, but really, if my apartment were to go up in flames and I could afford it, I'd buy every link on this list right now. Does anyone have strong opinions one way or the other on using them?
u/Ragnaroc05 · 1 pointr/Gunpla

ABSOLUTELY! I have built well over 50 models being a mixture of RGs, MGs and HGs and I have gone through the gambit when building them when it comes to emotions and skills. I started with automotive grade side cutters and using a pocket knife to trim the nub. Than I started panel lining, got a pair of jewlery nippers, sanding the nub and than to my system now a tool kit that includes Gundam Planet nippers, two hobby knives, straight edged toe nail clippers, sakura 005 black pens, metallic sharpies, masking tape and foam finger nail sanders. It wasn't until I joined this community that I learned more about aspects like adding a top coat and custom painting.

Gunpla isn't about making your model look like everybody elses, its about making yourself happy and enjoying the process.

With regards to RG kits, as they do have tiny tiny pieces, if you're really worried about your hands shaking I would look into acquiring a work stand similar to what people use while soldering electronics and making miniature figurines.
http://www.amazon.com/SE-MZ101B-Helping-Magnifying-Glass/dp/B000RB38X8/ref=sr_1_3?ie=UTF8&qid=1453307699&sr=8-3&keywords=solder+stand

EDIT: http://ragnaroc05.imgur.com/all/ In case you wanted to look around.

u/SpringCleanMyLife · 6 pointsr/mildlyinteresting

Squatting on ceramic toilets is incredibly dangerous! I'm sorry that happened to you but glad you didn't die, or something.

Have you tried a squatty potty? Best thing ever. The poop slides out like butter.

u/This-is-Peppermint · 4 pointsr/AskWomen

If you smell, that's going to be a pretty insurmountable problem.

However, if you're just a little unkempt, that can be easily remedied.

Get a pack of Face blotting papers or just cut up a bunch of coffee filters and keep them in a ziplock bag in your school bag. Wipe your face off in the bathroom with them before you go into class. (blot off sweat first with a paper towel, or else the sweat will use up all the blotting paper and you'll still have that day's worth of oil/grease on your face). Fix your hair, use paper towels from the bathroom if your hairline/hair is sweaty. You might want to carry a little container of hair product if you use hair product to look your best or if your hair after work looks really unkempt.

You can also use body wipes if you suspect that deodorant reapplication just to your underarms isn't cutting it.

for me, personally, i get it that life isn't always perfect and we aren't always looking our best. I wouldn't brush off a guy in an evening class who didn't look his best because he had obviously worked a long day before the class. However, odor WOULD be a huge turn off, because even if I'm willing to talk, I'd have to do it from farther away. Anyway, hope you can use some of my quick freshening up tips so you won't look/smell your WORST at this class.

u/izzylobo · 2 pointsr/minipainting

You're probably looking for something like this -

Helping Hands

I use one of these on occasion - I've stripped off the magnifying lense (too awkward), and have only one of the "hands" modules on it. With a little adjustment, you can move the miniature around to get at every bit of it, it leaves one hand free, holds it securely (so at least one part of brush + mini is steady!), and you can adjust the height of the mini pretty substantially.

u/Voiceless_Monk · 0 pointsr/electronic_cigarette

Well, congrats on your first build, yes, it does get better with practice! As for your vision, you might try some wearable magnifiers, I've seen PBusardo using them, something like these, http://www.amazon.com/Donegan-Optical-OptiVISOR-Headband-Magnifier/dp/B0068OSIIS.

u/NlightNme23 · 1 pointr/Multicopter

Sorry for the late reply. First of all, take all of this with a grain of salt. This is my first build, so I am by no means an expert. You should definitely look in to all this on your own rather than blindly trust my purchases.
Here are the tools I got in my Amazon order:

u/lukeatron · 2 pointsr/MechanicAdvice

I got a touch up pen from this website a few years ago and I was pretty happy with it. Get something like a dental pick and scrape the rust and crud off before you paint it. I use a magnifying glass to make sure I got everything completely clean. With all things paint, the result is completely dependent on the prep work.

u/hal1300-1 · 1 pointr/sysadmin

For the software side, your screen magnifier will do the job. For Linux, use gnome's zoom for screen magnification. So far gnome's zoom is better then others shells I have tried, especially compiz's zoom that would take a lot of cpu memory. I haven't tried out RedHat or Cent OS as a desktop, so it may have a good magnifier. And so far gnome's zoom doesn't support separate monitors and so it makes one large desktop basically, where I'd rather have different content on different monitors.

If you can do most of your work remotely/from your own station, you'll be fine with the screen magnifier. When at another person's computer, you might be able to turn on zoom via keyboard quickly and turn it off as needed, if setup. However, if you ever need JAWS type text to speech, it might be harder.

On the hardware side, it would really depend on how good your close up vision is. If you can use magnifiers to read and such, something like http://amzn.com/B003UCODIA or http://amzn.com/B00OK7ANB0 would help to deal with hardware. (Though the more powerful the magnification, the closer the object has to be.) As such, a bioptic might be an option for you. A bioptic is a lens that has a tiny monocular in it. You need more light then usual with it for close up work, but if you're like me, you need plenty of light already.

tldr; just do it. Nothing is holding you back but yourself.

u/runreadrun · 3 pointsr/running

A strange look here and there, but no one said anything; I guess it's not that uncommon to see people running since people do it all the time to catch flights. I just took it at a jog and wore basketball shorts instead of running shorts, basically tried to play it low key. If you're planning on doing some airport running, I recommend ShowerPill–large body wipes to clean yourself up when you don't have access to a shower. They're a lifesaver in situations like that.

u/call_me_cthulhu_ · 2 pointsr/Random_Acts_Of_Amazon

You should buy yourself a Batman Suit. Uhh I mean this because its adorable and sweater weather. If I was thinner Id definitely have one on my wish list.


If I win I could definitely use one of these. Haha its so embarassing but its suppose to work and be good for potty training.

u/mors_videt · 1 pointr/Warhammer40k

I've never used it, so, I didn't want to just launch in with a bunch of advice. If it was me, I'd use a magnifying visor and little tools like that.

You may need to lubricate the tools so they don't stick to the green stuff. Water works for Plasticine, not sure about, epoxy. (E: as below, Vaseline for green stuff, apparently) First, I would smooth the overall shape. Use a concave tool for convex edges, like biceps, and a convex tool for concave edges like saddles. Then, I would take a skinny tool and incise simple details, like those scales. Incision also makes little ridges, so you need to smooth those down while you work. You may have a limited time, so rather than get caught up in details and then have it dry half done, I'd work the whole thing all at once and get increasingly granular.

At the end of the day, if my level of control was not good enough to get the contouring and texturing that I wanted, I would try to design a solution that would still look good with the shaping ability that I knew I had, which is why I suggested scars or something.

Again, this is clay, not sure about epoxy. Your overall design is rad. This will look bad ass when it's painted, no matter how close you get your sculpting to your desired result.

E: tutorial for green stuff which says pretty much what I did lubricate with Vaseline, not water.

u/HelloAndTheEmployees · 7 pointsr/crochet

I use glasses kinda like this

Makes it much easier.

I really love small, cute things so I was happy to make her!

u/csmith2019 · 3 pointsr/rape

No-Rinse Bathing Wipes by Cleanlife Products, Premoistened and Aloe Vera Enriched for Maximum Cleansing and Deodorizing - Microwaveable, Hypoallergenic and Latex-Free (8 Wipes) https://www.amazon.com/dp/B00008QQN2/ref=cm_sw_r_cp_api_i_n3vLDbKXF2KDK

OGX Extra Strength Refresh & Restore + Coconut Miracle Oil Dry Shampoo, 5 Ounce https://www.amazon.com/dp/B076RXVCWV/ref=cm_sw_r_cp_api_i_03vLDbXPSZND0

I’ve been there and I’m sorry you’re going through it. I had anxiety induced seizures and I was terrified one would happen while I was in the shower. My sister would sit in the bathroom until I was done to make sure I was okay. ^ Those can be really helpful for in between showers.

u/dirtypaws · 1 pointr/Random_Acts_Of_Amazon

I’m sure you know about the Squatty Potty but I didn’t know about it until a year ago or so so maybe you don’t! It’s supposed to help you poo better lol. 💩

u/MojoMonster · 1 pointr/TwoXSex

From this, to this.

But this is the one we'd looked at before.

Good luck and have fun! :)

u/SuperRusso · 2 pointsr/AskElectronics

I use this pretty much 7 to 8 hours a day for soldiering and electronic repair.

https://www.amazon.com/Beileshi-Magnifier-Professional-Interchangeable-Magnifying/dp/B00KAU5FSC/ref=sr_1_20_sspa?keywords=Magnifying+headset&qid=1567833767&s=gateway&sr=8-20-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEySjdOUlFBWVQwUjZZJmVuY3J5cHRlZElkPUEwMzg1MDEyM0daSkhDQzZQTlVSUiZlbmNyeXB0ZWRBZElkPUEwMTYzMTk4MTQwVkdGSDBDN0NBRSZ3aWRnZXROYW1lPXNwX210ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

I like it okay, as it's very light and small, I like that I can adjust the focal length to suit my needs in the moment. I pretty much find myself going between the 2.5 and 3.5x lenses depending on what I'm doing. I also like that it's fairly low profile, so if someone needs to talk to me, or I need to glance at a schematic I can look around the lens with great ease.

The cons? I've had this for around 3 months, and I can tell the plastic clamp that holds the lens on is getting a bit worn, although no failure yet. Also, the light is useless. It works alright when the coin cells are brand new, but they quickly drop off. Even when they are new, it's not as if the leds are worth the trouble of constantly changing the coin cells.

If you want to solve those problems, I also have used this one extensively:

https://www.amazon.com/MagniPros-Illuminated-Headband-Magnifier-Detachable/dp/B071GWM9QN/ref=sr_1_19?keywords=Magnifying+headset&qid=1567833767&s=gateway&sr=8-19

I like it, but it's a bit bigger than the one I have now, thus it's a bit harder to look around without moving the lens. However, the light works a LOT better, as it runs on aaa cells. I don't find myself depending on the light in the headset very often anyway, so it may just not be that important to me.

For reference, I'm doing some mount soldering, and a lot of very small cable terminations, and I'd say my head is usually able to get my object in focus at a foot to a half a foot with either of these headsets. At this point, I cannot do my job without this tool effectively, so I've been shopping around, and I've yet to find a version of this that is worth sinking any money into.

Hope this helps!

u/HappierShibe · 3 pointsr/totalwar

>I never could comprehend how you people who actually play tabletop pull this shit off.

I play tabletop games and I will now reveal the great and terrible eight-fold secrets of good miniatures painting:

  1. https://www.amazon.com/SE-MH1047L-Illuminated-Multi-Power-Magnifier/dp/B003UCODIA
  2. Figure out your shading and highlighting BEFORE you start painting a model.
  3. PRACTICE.
  4. PATIENCE.
  5. PRACTICE.
  6. PATIENCE.
  7. MORE PATIENCE.
  8. EVEN MORE PATIENCE.

    Serious Version: Be confident, take your time, don't rush, don't stress, and don't worry. Channel your inner Bob Ross, and know that even a brushstroke made in grievous error is a step towards ultimate perfection. Miniature painting requires far less natural talent than other kinds of painting, but far more practice and patience.
u/lemtrees · 1 pointr/GearVR

Thanks! I'm sitting here with one of these trying to remember my optics to see if there is some sort of test you can do that doesn't require measuring, but rather seeing if your FOV changes or something but I can't seem to come up with anything. I'd just go test the thing myself at my local best buy but they just don't seem to be getting the new gear VR in any time soon, and I was hoping to order one prior to christmas.

u/zombiethoven · 1 pointr/BabyBumps

I would go ahead and consider an enema. You can buy fleet's or soap suds enemas but by far the most effective IMO are the glycerin suppositories. They may cause some cramping/digestive discomfort for a few minutes but they are the best for complete emptying. Take as needed until normal bowel function returns.

Make sure that you are incorporating plenty of fruits and greens in your diet and drink plenty of water. Switch to a non-constipating prenatal (look for chelate instead of regular Iron- still constipates but not nearly as bad). Also consider one of these https://www.amazon.com/Squatty-Potty-Original-Bathroom-Toilet/dp/B007BISCT0. I think it made the biggest difference in my ability to go.

u/lstpt · 1 pointr/SexToys

Look for similar products marketed as medical supplies for people with injuries/mobility issues. I have this one and I love it; the fact that it folds into multiple shapes is a bonus IMO for both use with multiple positions, and for storage, and that kind of feature isn't even available from Liberator's super expensive line: https://www.amazon.com/gp/product/B00NGKWKS6/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

u/Antistotle · 1 pointr/sex

Further, see this page (NSFW):

https://www.bettersex.com/accessories/position-aids/sex-position-furniture-c-561.aspx

​

Or if those are too pricey, this might work for you https://www.amazon.com/gp/product/B00NGKWKS6

​

The advantage these have over regular pillow are threefold. They are designed (more or less) for the task, they are taller, and if you get body fluids/lube on them you don't have to put your head on it to sleep :)

​

Also if his/your bed is too close to the floor for him to stand on the floor and give it to you good consider looking at some of these to raise the bed to a better height: https://www.amazon.com/s?k=bed+raiser&crid=WJ87JIL3OD4Q&sprefix=bed+raise

​

Also check the bed you are using. I am developing this theory that a bed that is good to *sleep* on is not as good for sex.

u/bassace5000 · 2 pointsr/Random_Acts_Of_Amazon

The helping hand Magnifier would sure help out me and my partner out when it comes to soldering our electronics in our studio. Especially since we have been using This one from Radio Shack. Especially cuz he can not deal with those little electronic parts, a light and magnifying glass would help a lot.

u/GrabbinPills · 2 pointsr/chemistry

For the majority of the time, if you just want a good look at your crystals (for example, if you're trying to determine if you have single crystals suitable for diffraction crystallography), a simple jewelers magnifying lens or a similar magnifying lens (~10x) is often acceptable. Often that level of magnification will be enough for just looking at your crystals and describing them. I don't know that much about photography so I can't be too much of a help there. High-magnification optical microscopes get expensive pretty quickly, and they won't be able to tell you a whole lot more than your cheap, $2 lens will.

u/Syesy · 1 pointr/DIY

I love my helping hands tool. Only $7 and had never failed. Maybe if I were soldering very small electronics I could see buying a nice vise grip like tool. https://www.amazon.com/dp/B000RB38X8/ref=cm_sw_r_cp_apa_-L0HAbVWXN6R8

u/PandaReich · 1 pointr/Multicopter

Heat shrink, why only pick one size?

If you're planning on using a lot of heat shrink it might be a good investment to get a heatgun, although a lighter works just fine.

[Cable sleeves] (https://www.amazon.com/PET-Expandable-Braided-Sleeving--10ft/dp/B00ZATLUZ0/ref=sr_1_3?ie=UTF8&qid=1467915160&sr=8-3&keywords=cable+sleeve) on amazon, there are multiple different sizes you can pick from, a quick search will net you tons of results.

A Helping Hand can be nice, but isn't needed.

You'll need to get a wire stripper or an x-acto knife and a careful hand. A hot glue gun is necessary IMO, it will protect and insulate your solder points as well as hold cables down IF you don't have zip ties. Also get zip ties. I made use of a wood file I had so I could smooth out some of the sharp carbon fiber edges on my frame, just don't breath in the fiber dust. I keep my quad in a backpack, my tool and extra parts are all in a box under my desk. Organization is not my strong suit.

u/sinembarg0 · 4 pointsr/functionalprint

This is awesome for when you need real crutches. However, for a sprained ankle, check this out: https://www.amazon.com/iWALK2-0-Hands-Free-Knee-Crutch/dp/B00092RB06

I saw a guy wearing one of these walking down the street, just booking it. it keeps both your hands free.

They're amazing if they work for you (so not for knee stuff, just for foot stuff).

u/Ristake · 6 pointsr/gifs

If anyones thinking of getting into a hobby that requires soldering, a quality soldering iron where you can set the temperature is immensely helpful. The Hakko FX888D is great starting point.

Having extra hands to hold wires in place and a magnifying glass is pretty much a requirement as well.

u/Skytso · 2 pointsr/boardgames

I think this is the video I watched when I was first learning to paint eyes. My first few attempts were trash but eventually I got the hang of it.

One thing that helped immensely was to paint the face color across the whole eye area, then paint the white over that, then paint the pupil in (as a vertical line first), then touch up with white then touch up with the flesh color around it again. I use this so that I don't have to worry about trying to keep it super clean when I'm doing the pupil but also don't have to worry that I haven't painted all the nooks and crannies around the eyeball.

Also, I got a magnifying glass thingy that made detail a whole hell of a lot easier. It's only a couple of dollars but has helped my eyes and has allowed me to do greater detail than I ever imagined.

u/wef1983 · 2 pointsr/explainlikeimfive

InteVision Foam Bed Wedge Pillow (26" x 25" x 7.5") - 2" Memory Foam Top Layer with Firm Base Foam & a High Quality Removable Cover - Helps Provide Relief from Acid Reflux, Snoring, Post Surgery https://www.amazon.com/dp/B00AK3VZBA/ref=cm_sw_r_cp_apa_i_kpNVCbMFGE8FA

This is the one I ordered, but honestly it's literally just a wedge of foam with a pillow case on it so I think any one you can find would be good.

u/qckpckt · 1 pointr/diypedals

If you don’t have one already, now is also a good time to invest in a helping hand. They’re invaluable. I use a little desktop clamp to hold the PCB I’m working on, and then another like this to hold parts / cables / etc. Makes awkward soldering situations like this significantly easier!

u/_josepi_ · 1 pointr/DIY

Hey, I've made one of those :) Sans fancy veneers.

To make your soldering life easier, get one of these guys:
https://www.amazon.com/SE-MZ101B-Helping-Magnifying-Glass/dp/B000RB38X8/ref=sr_1_4?s=hi&ie=UTF8&qid=1518785664&sr=1-4&keywords=soldering+helping+hand

Next up is dealing with those frets, get a fret rocker/files off aliexpress (about 1/5th the price of buying from US sellers) and a set of feeler gauges.

The pickups included in those aren't so hot, https://www.guitarfetish.com/GFS-Guitar-Pickups_c_7.html for cheap and mildly betterer.

Now, garageband isn't the best way to play, so...lookup on building your own 5e3 kit or the like, you'll save hundreds and probably have another video to make just in that.

u/veni_vidi_vale · 3 pointsr/headphones

I like how you think!:-)

all you need is a halfway decent soldering iron. Some [helping hands] (http://www.amazon.com/SE-MZ101B-Helping-Hands-Magnifying/dp/B000RB38X8), with or without a magnifying lens, is, well, like a 3rd hand.

If you have never soldered before, practice on the old cable/connector. Get a 1/4 inch replacement connector because you will have more room to solder. You can get decent cable without having to pay $$$$$.

The detachable cable mod is a little more tricky, but you don't have to do it all at once.

It's a great way to spend an evening.

u/gustavo_the_frog · 4 pointsr/bicycletouring

great set up.

Do you have a towel packed? I also prefer to pack some portable shower wipes - I used these on my last trip http://www.amazon.com/Defense-Soap-Wipes-40-Pack/dp/B001G7Z0RO/ref=sr_1_4?ie=UTF8&qid=1426553733&sr=8-4&keywords=shower+wipes. The ride from San Diego to Arizona will be desolate and you will appreciate wiping clean after a long dusty day. Do you have a headlamp? You will want to get up and ride before sunup on some stretches through New Mexico/Texas.

Enjoy the trip! I'm jealous.

u/chuckufarlie · 7 pointsr/whatisthisthing

It's called a third hand tool or helping hand: https://www.amazon.com/SE-MZ101B-Helping-Magnifying-Glass/dp/B000RB38X8/ref=sr_1_3?ie=UTF8&qid=1499213965&sr=8-3&keywords=third+hand

Often used for soldering; or any task where you need to hold items while working on them with hand tools. Using for tying flies would work, possibly examining gem stones too.

u/zik303 · 1 pointr/MechanicalKeyboards

Yeah, that's the good stuff. Just keep practicing, you'll get better quickly.

Also, I use one of these, it's been very helpful:

https://smile.amazon.com/gp/product/B003UCODIA/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

u/russkhan · 3 pointsr/RBA

Meh, I don't really find it easier or better than just using a drill bit.

This thing on the other hand, is very helpful. Though it may be largely because I often do coils in the evening/nighttime and the lighting at my desk isn't very good.

u/norice4u4308 · 3 pointsr/SkincareAddiction

There are devices like this one: http://www.amazon.com/Aquasentials-Aqu-3611-Easy-Lotion-Applicator/dp/B001D8ZGAM/ref=cm_cr_pr_pb_t/181-1830303-4705465 (sorry I am using a reddit app on my phone and can't figure out how to embed the link). It's like a sponge on a stick made specifically for putting lotion on your back. Pretty neat.

u/ENGR001 · 3 pointsr/3Dprinting

Edit: Please make sure you turn off and unplug your power supply before cutting any wires.

Parts / tool list below, this what i used but there are substitutes out there.

Note: Main thing that is slightly challenging is soldering the XT60s, basic idea is to “tin” (soldering term) the wires and the XT60s first, then heat the connector with your iron as you put the wire in to get a good fusion. Decent video on soldering them:solder XT60s


My soldering Iron:
https://www.amazon.com/gp/product/B00ANZRT4M/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Soldering Flux:
https://www.amazon.com/gp/product/B008ZIV85A/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Solder (60-40)
https://www.amazon.com/gp/product/B071G1J3W6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

New XT-60’s and Shroud:
https://www.amazon.com/gp/product/B074PN6N4K/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Helping Hands (not required, but def helpful)
https://www.amazon.com/gp/product/B000RB38X8/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

Bought this a while ago, but any heat shrink will do:
https://www.amazon.com/gp/product/B01MFA3OFA/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Wire - If you’re new to soldering and need practice, or you’re going to split your cables for Rasberry Pi, or other components, etc:
https://www.amazon.com/gp/product/B01ABOPMEI/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

u/alienman82 · 6 pointsr/MechanicalKeyboards

Those are really cheap. They are mostly used to solder wires since they can't support much weight. I would get him something better like this or this if you wanted to spend a little more. I have all three of these, so I know what is good :)

u/prince_of_tacoma · 19 pointsr/everymanshouldknow

62 is really thick if you're soldering PCBs/components. I guess if you're just soldering wire to wire or wire to connector, 62 would be fine. I have a roll of 62 and 31. I mostly use the 62 to tin.

Also, use a sponge. Don't just go around flicking your excess solder/flux. It is, of course, very hot. I burned myself a few weeks ago and the wound is just now almost healed.

I got that exact third hand thing on Amazon for like 6 bucks here. It makes soldering significantly easier (most of the time). It even has a magnifying glass arm for PCB soldering.

u/Lolgabs · 2 pointsr/Psoriasis

https://www.amazon.com/Aquasentials-Aqu-3611-Easy-Lotion-Applicator/dp/B001D8ZGAM?th=1

This seems like something that might work? I've not got it very bad on my back so I've not had this issue. /u/notfoursaken suggested a wooden back scratcher but maybe something like this might work a little better? It's only like $7.

u/orangefolders · 2 pointsr/OkCupid

Ok, that sounds better. But you should be fine for a date after work as long as you're not digging a hole or something during the day. If you're super concerned they make shower wipes so you can freshen up without a shower.

u/illuxion · 1 pointr/electronic_cigarette

$8 on amazon, I have the same one. The LED is useless, you have to tighten the hell out of the side nuts for it to stay up, but the lenses are pretty good, definitely worth $8.

u/i_hear_colors · 1 pointr/minipainting

I bought this recently and I am really pleased with it. Great value for the money.

https://www.amazon.com/gp/product/B071GWM9QN/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

u/binderclips · 3 pointsr/CrossStitch

FWIW, I just got this magnifying visor because I found it really difficult to see on 18ct black Aida. I love that it's wearable so I can move around easily and it even has a battery operated light. I imagine it would also help with 1 over 1 on 22ct...

Nonetheless, you're nuts because this seems like a huge project with lots of confetti. :D I'm looking forward to seeing your progress updates!

u/rcreveli · 1 pointr/knitting

When I first got my machine it would get really cranky after 50+rows even with weights. I found I had to spray some lube on rag and wipe down the bed pretty often. The machine was so dry I needed to replace 20+ years of lubricant with fresh.


What weight yarn are you using? I believe this is a standard gauge machine, sport is the heaviest recommended weight. Start with a fingering weight like KP palette. You may want to get some inexpensive acrylic for your test runs. Michael's sells their "loops and threads" in fingering for $2.00 for ~400 yards. I like the Tamm Astracryl and Tamm Bebe yarns. Knit Knack Shop has them, though they have a terrible site.

Also check each needle, a broken latch will cause all kinds of problems. I bought this Magnifier for less then $10 It's a Godsend for checking needles and fixing dropped stitches.

The mechanical parts of the machine are extremely robust. It's most likely just tuning at this point.

u/hi_bye · 2 pointsr/jewelry

Tools would have less to do with what forms of jewelry she is making (necklace, earrings, rings etc) and more to do with the techniques she is using (forging, wire-wrapping, stringing, soldering etc). That's why it might be wise to either ask her what she wants or let her choose specifically. Could be there is a technique she has been wanting to explore and you could get her set up to do that.

Loupes are typically 10x.

The optivisor magnification strength depends what she is doing and how close she needs to be to do it. I have one of these: http://www.amazon.com/dp/B0068OSIIS/ref=biss_dp_sa1 I use mine primarily for faceted stone-setting where I need to be close to my work piece and do very precise and detailed work, so I have the 3.5x, 4" focal length. I would think between 2.5x-3.5x might be good for her.

You can also get the empty headgear and buy multiple lensplates for her to interchange.

u/mynamesames · 4 pointsr/xxketo

Yo! It's been a ride this past week. I posted a while ago that I had a stress fracture in my foot from running. Well I went back to the doctor cause it still hurt and I was not ready for them to say "Well, if it hasn't healed yet you really shouldn't be on it. You need to be on crutches for two weeks. Then in a boot for two more". So. I live alone in an old house with stairs so crutches or a scooter are not great options. In the end, I got this thing that's basically a modern pegleg called the iWalk 2.0- I'd never seen anything like it before. It's hands free and can do stairs, so I can do most things, but obviously not as much as I want!

I manage to do maybe 4000 steps a day on the iWalk and can't really do much else for exercise without putting weight on my foot, so while I want to feel bad for myself and eat everything - I need to be super careful about what I eat cause I have no buffer! If you have super easy, low cal meals that require almost no dishes and no prep hit me up!

One more week on me pegleg, Mateys! Have a great one!

u/coupon_user · 1 pointr/Frugal

These toothpaste squeezers are very useful, make good stocking stuffers & will satisfy the frugalite in you by saving you money over time.

http://www.amazon.com/Plastic-Squeezer-Toothpaste-Dispenser-Bathroom/dp/B0087FIHDW

http://www.amazon.com/Squeezit-CLP-SQ2-TR-Evriholder-Toothpaste/dp/B001BYFCHA

u/kenman · 2 pointsr/self

Nice! A few questions & suggestions...

  • Why the gum? I don't know anyone that regularly chews non-nicotine gum (though I'm sure they're out there). It's not going to benefit them nutritionally nor will it help them out in the elements, so it just seems kind of odd. I mean, if they enjoy it, then that's great! But it seems like to me that you could get more happiness-for-your-buck by giving them something with utility, or that a larger portion might be able to use or enjoy. Perhaps a small bottle of aspirin or something.
  • Also not sure about the hand sanitizer? Just thinking out loud here, and maybe I'm just an anomaly, but I also don't know anyone that uses that stuff with any regularity. I know parents will sometimes keep some around if they have young kids, but none of my friends or family carry it that I'm aware of. If it were me, I'd probably prefer bathing wipes, though that might break your budget.
  • Another idea that might break your budget, would be to put everything in some kind of a duffel bag or backpack; if I know anything about the homeless, they value their bags. The problem with the plastic grocery bags is that they create a lot of litter, and they won't hold up for very long at all in the wild.

    Anyways, keep up the good work, they are members of our society just like everyone else, even if they're often forgotten and/or become a victim to an endless cycle of arrests.
u/Pizza_Butt27 · 6 pointsr/sexover30

InteVision Foam Bed Wedge Pillow (25" x 24" x 12") - 2" Memory Foam Top Layer with Firm Base Foam and a High Quality Removable Cover - Helps Provide Relief from Acid Reflux, Snoring, Post Surgery https://www.amazon.com/dp/B009HHLBKK/ref=cm_sw_r_cp_api_QAn-BbRM91F93

We’ve had this one for almost two years and highly recommend it.

u/Gorreksson · 2 pointsr/minipainting

https://www.amazon.com/MagniPros-Illuminated-Headband-Magnifier-Detachable/dp/B071GWM9QN/ref=sr_1_1_sspa?ie=UTF8&qid=1537301259&sr=8-1-spons&keywords=magnifying+glasses+with+light&psc=1
This has 5 focal lengths so it could be good for getting the right one for you, it's not very expensive and they seem to be pretty popular for model painting

u/ieatmakeup · 6 pointsr/EDC

If you're out for a while, this is what you need.

https://www.amazon.com/dp/B00092RB06/ref=cm_sw_r_cp_apa_6-SByb5BRZ46E

I severed my Achilles in October and used crutches for a few weeks. This is miles better than anything else. Complete use of your hands is amazing. I've fitted mine with some more padding on the knee but everything else works great. I'm in a boot now, but I still keep this around as its handy for around the house.

u/ano463s · 2 pointsr/AprilBumpers2018

OH!!! And I almost forgot... This might not work for everyone, but if you're feeling constipated/gassy... consider a Squatty Potty or an equivalent. This morning nothing was happening, stepped on the squatty potty and whoosh. Doesn't always work, but worth a try. And I would think quite easy to simulate without buying one.

u/tweaknmod · 2 pointsr/mildlyinteresting

Problem solved : Squatty Potty!
Yes, I have one. Yes, it's awesome.

u/b00persn00t · 1 pointr/ACL

Yes! When one (car) door closes, another opens ;)

This is the wedge pillow I got but it was cheaper when I got it (~$25) - I think any wedge pillow could work, or you can get one that's designed for a single leg - just make sure you can use it with your leg fully extended.

This is the bed desk I got - I used it a lot for the first few days, but then I was able to move myself to a desk. I guess I should probably still use it when I'm on my laptop in bed but I don't... my laptop doesn't have any issues overheating and I feel like it just gets in the way sometimes.

u/hedgehogsnmoose · 2 pointsr/breakingmom

https://www.amazon.com/gp/aw/d/B00092RB06/ref=mp_s_a_1_1_a_it?ie=UTF8&qid=1542286211&sr=8-1-spons&keywords=iwalk&psc=1&smid=A16VRQ4X5LV1CM

I don’t know if you have the spare cash for this but one of my friends was in a similar situation and used this. She swears by it as it is much easier to maneuver than the knee scooters!

u/Ohthere530 · 2 pointsr/tifu

Squatting is a healthy way to shit.

I have sat your way, squatting on the rim, when I needed a little extra help getting the poo to slide. Works like a charm.

Amazon even has products to help.

u/SteampunkBorg · 2 pointsr/HomeNetworking

Maybe a "third Hand" would help you.

Seriously, I can see on an acceptable Level and handle Tools pretty well, but I still use one of These for things as fiddly as Ethernet cables: https://www.amazon.com/SE-MZ101B-Helping-Magnifying-Glass/dp/B000RB38X8/

There are more fancy ones available, with larger magnifyer, more clamps, more flexible arms etc.

u/Yodster · 2 pointsr/NYList

I don't have a knee scooter (sold it already), but I do have an iWalk 2.0

I found it way more useful than a knee scooter, especially for doing stuff around the house or being in small spaces.

I'm in town this week if you're interested.

u/jaykaizen · 1 pointr/electronic_cigarette

I'm basically in the same boat as you so I cant help you much but here's some places that can.

https://youtu.be/gDbVtbLJicA
I haven't watched that video but there are is a few on YouTube.

try doing a search here and if you still have questions do a post.
http://www.e-cigarette-forum.com/forum/modding-forum/

Thsee are two highly rated soldering stations on amazon

http://www.amazon.com/gp/aw/d/B000BRC2XU/ref=mp_s_a_1_9?qid=1427285096&sr=8-9&pi=AC_SX110_SY165_QL70&keywords=soldering+iron

http://www.amazon.com/gp/aw/d/B00ANZRT4M/ref=mp_s_a_1_19?qid=1427285346&sr=8-19&pi=AC_SX110_SY165_QL70&keywords=soldering+iron&dpPl=1&dpID=41sCMxh%2BAYL&ref=plSrch

And you may want to get these

http://www.amazon.com/gp/aw/d/B000RB38X8/ref=pd_aw_fbt__hi_img_2?refRID=04241AVDK89CA7JZ7G53

http://www.amazon.com/gp/aw/d/B0002KRAAG/ref=pd_aw_fbt__hi_img_3?refRID=05VW456WDCV7D1PTHEPE

You may want to start with an unregulated or an okr or raptor build. It'll be cheaper and its easy to find tutorials on building them online. That is probably what I will start with.

u/NickTackular84 · 1 pointr/rccars

Do yourself a favor and buy this
http://www.amazon.com/gp/aw/d/B000RB38X8/ref=mp_s_a_1_2?qid=1383180500&sr=8-2&pi=AC_SX110_SY165_QL70

That's what I use. Also my technique is to put soder on the connector then sodder the wire then all I have to do is hold the cable next to the connector heat up the soder and wait a few seconds for it to cool. Perfect connection every time

u/kkinderen · 2 pointsr/fountainpens

I never put a loupe into my eyes. Maybe we're talking about a different type of loupe?

Something else that's worked quite well for me, I use it a lot when soldering but works fine for pens too is this. It's kind of cheap but has held out for about 6 years now. Much more useful for extended viewing.

u/bobgengeskahn · 2 pointsr/electronic_cigarette

It looks like people have mostly got you started here in terms of supplies. In terms of tools though, this is what I keep in my rebuilding stuff (linking to Amazon just because its easier):

  • Small screwdriver set OR Hex set OR a combo set. Which one will depend on the RBA you get, but eventually you'll probably find yourself with ones that have Phillips and Hex screws.
  • Butane Torch. You can get this same one on Fasttech for $4 if you don't mind the shipping time.
  • Wire cutters, either full size or micros
  • Pliers, I also have a set of channel locks accessible, but not in my normal kit, mainly to try and get my Bombshell Stinger apart
  • A generic desk light or something like helping hands can save a lot of headaches.
  • Cheap multimeters can be found from $5 - $20
  • Exacto knife because knives always come in handy at some point (rule #9)

    Other generic stuff:

  • Toothpicks (great for wrapping coils around)
  • Cotton swabs, cotton balls and paper towels
  • Bic lighter
  • Scissors for cutting wick (I use the wire cutters, but if you have micros, 3mm wick might get messy/frayed)
u/The_Amazing_Shaggy · 10 pointsr/Multicopter

Smoke-stopper, they protect from serious screwups in soldering and wiring. https://youtu.be/4z7yRG56aKM

But don't sweat it man, just scream it out, grab a beer or a fat one and chill. We all have to make mistakes to learn, everyone here has dumb shit we can claim too. Some cost us more or less and some cost us in different ways. It sucks no matter what though, that never changes. Also get a simulator and a cable to connect your tx to your PC to control it or the simulator time will be useless. Use the sim to practice risky moves before actually trying them in a flight and also as a way to fly when you're grounded for repairs or whatever. It's not the same feeling, but the practice will pay off in saved components very quickly I can promise you. My last tip is to get a hands free magnifying lens: either something in a stand/clamps to your desk or a headmounted setup like this for $10 on Amazon Prime:

https://www.amazon.com/SE-MH1047L-Illuminated-Multi-Power-Magnifier/dp/B003UCODIA

u/Definitely-a-bot · 1 pointr/January2018Bumpers

I got this and really loved it! http://amzn.to/2uwmr3t :)

u/r4d0x · 2 pointsr/diypedals

The nicest one I have ever used was [this one by Otto Frei.](
http://www.ottofrei.com/Store/Soldering-Stations-Third-Hands/GRS-004-570-Double-Soldering-Station-With-2-Third-Hands.html) I really liked it when I borrowed it to do some wire harness and cable modifications, so much so that I looked it up afterward, but I couldn't handle the sticker shock.

For pedal making/modifying, I would recommend a circuit board holder and a typical helping hand (with or without magnifying glass) so that you have both hands available to use the iron and feed solder.

u/jemartian · 1 pointr/BabyBumps

Bed wedges! They are amazing. I've had really bad acid reflux for over 10 years now, the kind that makes you run to the er because it feels like someone is ripping your chest open, and wedges are a huge help! I have been sleeping on one every night for 8 months now and my night time symptoms are almost nonexistent. Here's an example of one http://www.amazon.com/InteVision-Wedge-Pillow-Quality-Removable/dp/B009HHLBKK/ref=zg_bs_3775471_1

u/AdvocateReason · 3 pointsr/minipainting

Or at least a Head Magnifier
Here's the Desk Magnifier w/light that I use.

Would love to hear some better recommendations though.

u/Extension_ · 1 pointr/rawdenim

Thanks to this sub, I ordered some unbranded 221 from Urban Outfitters for a great deal. They'll be my first pair of raws, I've lurked a bit and I'm excited to go down the raw denim rabbit hole. Can't wait to get my hands on 'em. thank you.


To contribute to the GD thread, my g/f got a squatty potty this week: product home link, amazon link


It's...ok. I'm familiar with squatting toilets and can use them no problem, and I totally buy into the idea that squatting is better, but its just not as comfortable. But it's definitely a conversation piece and she ordered bunch to give out as Christmas presents. We'll see how my receptive my parents are.

u/Happy_Laugh_Guy · 5 pointsr/bjj

I'm not saying to get this one but maybe something like it:

ShowerPill Athletic Body Wipes for Cleansing and Deodorizing, 10 Count https://www.amazon.com/dp/B0061QL8EE/ref=cm_sw_r_cp_apa_ypCdAbNH6VBH4

Stuff for camping probably more cost efficient maybe. Anything that cleans and kills bacteria. I know that there's a brand gyms usually carry, maybe even just the antibacterial hand wipes or sanitizer for your hands and then a shower wipe for the rest so at least you don't touch your eyes and get sick that way, then just get clean enough so you don't stink.

There's dry shampoo too. Or wash your head in a sink and then wash your face with face wash.

u/Ratscallion · 3 pointsr/90daysgoal

BQ Favorite vacation was in 2010 when I took the kiddo to the Riviera Maya area of Mexico and we had a blast together. Or, maybe when I backpacked in the Rocky Mountains in my 20's.

Yesterday I was really good - kept my foot elevated, took short breaks from the lying on the couch to do stuff. I have one of these that I'm borrowing from a friend. It's made life way easier. I can cook food and do dishes and I'm not completely dependent on someone else for everything! (I still can't drive. Stupid stick shift car.) Oh, and I had a lovely little dinner/fun take my mind of things evening with B before he had to play softball.

Today

  • Work from home. I've already discovered that sitting at the desk must include propping my leg up on top of my desk. We'll see how this goes. I've got stuff I need to get done, though.
  • Exercise - do my z-health drills. Figure out how to do some more upper body stuff today.
  • Life - continue to behave. Don't try to walk on the damn foot (I tried yesterday. No go. I tested just a little bit of weight this morning. Still no.) Take breaks from sitting. Figure out how to pad the back of my knee so that knee crutch stops killing me there.
u/permanenttemp · 1 pointr/radiocontrol

Can't go wrong with this, $19.07 shipped with Prime.
http://www.amazon.com/Weller-SP40NUS-Medium-Soldering-Black/dp/B00B3SG6UQ/ref=sr_1_3?ie=UTF8&qid=1398198851&sr=8-3&keywords=weller+40

If you need something safe for smaller projects as well, this would be fine. $41.19 with Prime
http://www.amazon.com/Weller-WLC100-40-Watt-Soldering-Station/dp/B000AS28UC/ref=sr_1_2?ie=UTF8&qid=1398198808&sr=8-2&keywords=weller+40

I guess I'm a fan of weller products. I've had them at home and a shop. I got one of their higher end soldering stations when I was about 11 to build my own battery packs for my R/C cars and it saw a lot of use. Back then we hardwired the leads from the ESC to the motors and batteries between heats for the lowest resistance. (not to mention deans plugs weren't a thing yet, tamiya connectors would melt together with a hot motor/battery combo) I still have it over 20 years later.

I would say 40 watts is about the standard with typical R/C projects. Also, the lower end brands 40 watt irons don't ever seem to create the heat as something of decent quality.

Also, if you don't have something like this yet, pick one up. $7 shipped all over Amazon. Also available at Harbor Freight for about the same price if you have those in your area.
http://www.amazon.com/SE-MZ101B-Helping-Hands-Magnifying/dp/B000RB38X8/ref=pd_sim_hi_3?ie=UTF8&refRID=0TB7X5RYFKZ3SR4EXY1P

u/kittysworld · 2 pointsr/eczema

This one on Amazon has good reviews from thousands and is cheap: Aquasentials Easy Lotion Applicator

Disclaimer - I have never used it. I am not living alone so I currently don't need any.

u/ElsieSteam · 2 pointsr/minipainting

When I first started painting minis a year ago I saw someone recommend this guy https://www.amazon.com/gp/product/B003UCODIA/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

Super cheap. I've had it over a year and havent even had to change batteries on the light. It's not always the most comfortable, but I only wear it for the real fine details.

u/avtechguy · 3 pointsr/livesound

Its been a while but I used soldering helping hands Clamped in a mini vise. It worked out great. I also put pieces of heatshink on the end of the jaws to minimize marring.

u/aznofchaos · 2 pointsr/MechanicalKeyboards

Hi!

Quick tip when soldering: wear eye-protection!

When I was a child, I tried my hand at soldering under dad's supervision. I was near-sighted and did not wear eye protection. POP! Yes! Solder pops when rapidly heated (common occurrence when applying solder a large surface of the iron quickly)

I always wear this when soldering now (if you don't mind looking like a completely tool, whlist doing it)

u/tsv1138 · 1 pointr/malefashionadvice

No problem. I was also a bit of a punk and had to do a lot of research on how to dress for the career I ended up in. Also riding my bike to work I find that these things are awesome if you have to switch between manual labor and wearing a nice shirt. Good luck on the new gig, it gets easier as you get into the flow.

u/jtseattle · 2 pointsr/bicycling

If you don’t have a shower at work, these are great on hot days or if you’re a sweater like me: https://www.amazon.com/Shower-Cleaning-Special-Cleansing-Solution/dp/B0061QL8EE

u/beetry · 1 pointr/DIY

I think if you're able to financially, you should try and get something more in the mid-range. I have a feeling that this 15 dollar iron is going to be wildly inconsistent in keeping it's temp up and make it extremely difficult for you to get good solder joints. I would recommend something like this.

As far as other accesories go, I would grab a "Helping Hands" a head band magnifier and some nice small tweezers.

u/divorcedandhappy · 12 pointsr/JUSTNOMIL

I went about 6 weeks not being allowed to get wet on my body due to catheters being placed and needing to heal, so no showing our baths. I bought no rinse body wipes from Amazon and went to fantastic sams and got my hair washed and blow dried once a week for 15 dollars. It's not the same. It's not. But it really went a long way to bridge the gap. The wipes are nice, you can heat them in the microwave and they aren't really scented as I have really sensitive skin.

https://www.amazon.com/gp/aw/d/B00008QQN2/ref=mp_s_a_1_6_a_it?ie=UTF8&qid=1518837927&sr=8-6&keywords=no+shower+body+wipes

If links aren't allowed, I'm sorry!!

u/Spacytracy · 9 pointsr/running

I got these shower wipes on Amazon. They work pretty well. Defense Soap Body Wipes 40 Count https://www.amazon.com/dp/B001G7Z0RO/ref=cm_sw_r_cp_apa_3nuTAbZR723C8

u/sumthingsup · 2 pointsr/Multicopter

Just yesterday I replaced the body of my X4. I have never used a soldering iron before. The desoldering and resoldering of the motors is a piece of cake. You are going to want one of these... http://www.amazon.com/gp/aw/d/B000RB38X8?cache=11f46a07c09d9240592152877290bff4&pi=SY200_QL40&qid=1412195317&sr=8-1#ref=mp_s_a_1_1 Good luck!

u/Dutchy8210 · 1 pointr/CysticFibrosis

I bought this about 6 months ago, and its been awesome. Finally got sick of stacking all those pillows.

http://www.amazon.com/gp/product/B009HHLBKK?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00

I also do some vicks vapor rub every night, which seems to help me breath better.

u/necessaryresponse · 2 pointsr/DIY

I think a lot of people have trouble because they don't have a hot clean tip. My friend who "can't solder" has a 20+ year old soldering iron with a corroded tip. I use a wet sponge, cleaning wire, and tip tinner interchangeably to keep it clean as I go.

Also having one of those magnifying glass/alligator clip holders is extremely helpful.

u/Chrono68 · 1 pointr/AskElectronics

Diy lm317 power supply. these things aren't the best but it is a linear supply and for hobbies you won't need anything more sophisticated. It's dirt cheap, and you get to practice soldering. Imo, buy 2 so you can supply the negative voltages for the common op amp.

Soldering station I have fondness for this station as it was the one we had to buy for our program at school. I like it a lot because the iron stand, heating element, sponge holder, and a solder wire spool are all connected so you just need to haul around 1 object. Don't need to go digging for your iron stand or setting your spool of solder somewhere and forget it. Works well enough for your use and I believe there are tips out there.

Breadboard and wires this is mandatory. If there's anything on my list you choose to buy, you must buy this first. Breadboards are essential. If you can buy two of these.

63/37 solder you don't work for a company that is rohs compliant, don't burden yourself with leadless solder. Look for a us shipping of that if you don't want to wait.

Wire snips if you own side cutters you probably won't need these.

Wire strippers again you might not need these if you are patient and strip them with cutters. Also the breadboards above come with pre cut

Helping hands I do SMD rework professionally and I don't use hands because I'm an idiot. Don't be an idiot and learn from the get go using these.

If you can find any of these for cheaper than I found, go for it. Should be around 70 bucks. Good puck!



u/tbaileysr · 1 pointr/minipainting

I got mine from Hobby Town for around $16 not sure the model. From China I am sure. They had a more expensive model too. Don't get the Harbor Freight one it is terrible. The magnifier is terrible, and the battery doors won't stay on. The cheaper one I got from Hobby Town works much better. For a gift the nicer model may be the way you might want to go.


Edit: This looks exactly like the one I got. Go figure it is less than I paid. https://www.amazon.com/exec/obidos/ASIN/B003UCODIA/ezheadbandmagnifiers-20

u/HimalayanPunkSaltavl · 21 pointsr/trashy

You too can benefit from better pooping posture with only 24.99 down!

https://smile.amazon.com/Squatty-Potty-Original-Bathroom-Toilet/dp/B007BISCT0

u/stronglikedan · 4 pointsr/KratomKorner

As a 1 oz/day user, I poop regularly at 8 am each day. I even wake up at 8 to poop on days when I can normally sleep in. I rarely poop twice in a day.

I just make sure I do two things:

  1. Drink a 32oz tumbler of ice water with each dose. (I drink 4-5 of those a day anyway.)
  2. Eat a high fiber breakfast. (my fav)

    Another thing that helps, but is not necessary, is a squatty potty. I used to use it only when constipated (when on other opiates), but now I use it as much as possible, because it just feels right.

    Finally, when nothing else works, a 1/3 - 1/2 bottle of tart cherry juice will get things moving.

    The only thing that will for-sure-every-time constipate me is the capsules, so I avoid those like the plague.
u/SaysHiToAssholes · 3 pointsr/machining

These are the ones I have.
They work quite well and are excellent quality.

u/Jarth · 1 pointr/LightningInABottle

That's definitely understandable, I know myself i'll be taking a shower right after and will be bringing these as well to share with everyone

https://www.amazon.com/Defense-Soap-Body-Wipes-Count/dp/B001G7Z0RO

u/thepurplepajamas · 5 pointsr/IWantItSoBad

I had something like this for toothpaste back in the day. It was like a $1. Still not sure if worth monetarily, even at that price, but it was fun.

u/stephw8 · 1 pointr/minipainting

I agree the "helping hands" magnifier just wasn't cutting it.

This is the one I bought, it has 4 levels of magnification.

http://www.amazon.com/SE-MH1047L-Illuminated-Multi-Power-Magnifier/dp/B003UCODIA?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00

u/bummer_camp · 3 pointsr/ftm

The wedge pillow is seriously worth its weight in gold. It made both sleeping and getting into/out of bed really easy and comfortable. I got this one but I think if you poke around amazon you can find cheaper ones. The 12" height is key though!

u/arctic_man · 1 pointr/SleepApnea

I sleep sitting up. I could not handle sleeping on my side, and do not like the idea of the machine; so sleeping reclined it is. Not diagnosed because that costs monies, but I do snore very loud, and wake up tired. Lately I have been waking up in the middle of the night to use the bathroom which can be a sign as well. Sleeping reclined has helped quite a bit. I feel better during the day and do not feel like I am going to fall asleep at work or in traffic.

I will be picking up one of these to help eventually.

u/explainmypayplease · 4 pointsr/CanadaPublicServants

I would have silently gifted her this. Because, fun fact, squatting is actually the most efficient way to get shit done (pun intended). Maybe she just wanted to be as efficient as possible and get back to work as soon as she could?

In conclusion, to be efficient at work but also to avoid the whole unhygienic footprints-on-toilet-seat situation, the solution is the Squatty Potty!!!

u/oilandgasdowork · 1 pointr/crossfit

Defense Wipes. They are the best thing if you can't take a shower.

https://www.amazon.com/dp/B001G7Z0RO/ref=cm_sw_r_cp_api_iF01xbGHKJ46V

u/cfeyer · 2 pointsr/paintball

Try a Squatty Potty for a few weeks! Changed a friend's life for the better in this department. Can also get these at local stores like Target.

https://www.amazon.com/gp/aw/d/B00ESKVN7W/

u/Nekkosan · 1 pointr/AsianBeauty

I use a back scratcher with a little ball on the other side. Not for that and I had to gorilla glue on the ball. I can't get moisturizer or exzema creams on to the middle of my back, which is quite dry and itchy. It use it because it's long. I also got something like this on Amazon, which rubs stuff in better, but it's not long enough or angled ideally.

u/TheAsshatBloke · 0 pointsr/confessions

That is literally a thing. https://www.amazon.com/Squatty-Potty-Original-Bathroom-Toilet/dp/B00ESKVN7W

Kinda weird to find in the bathroom of a friend or person you're seeing romantically

u/mlkersey · 3 pointsr/AsianBeauty

Have you ever tried using one of those toothpaste clip things on a squeezy-tube like this? I'm not sure that it would work because of the tube's plastic thickness (medium) compared to a toothpaste tube's thickness (very thin) but it's worth a try. I think it'd work well for arthritic hands.

u/pokeraerae42 · 8 pointsr/The_Donald

I'm checking out their Amazon page and it's hilarious the description of how/why the squatty potty works. I wonder how many sales they're gonna make after the publicity of denouncing her. Probably more than they made with her commercial lol

u/mynumberistwentynine · 3 pointsr/electronic_cigarette

Super pricey really. I mean, you can get this for 7 bucks. It wouldn't take much to make the rest.

Thing is though, most people don't want to do that. So more power to them for making something people want to buy. I can't blame em.

u/sspencerz · 1 pointr/airsoft

get one of these and solder on random scrap wire. The helping hand works wonders in keeping your wires from moving.

u/UndeadCaesar · 2 pointsr/minipainting

You ever use something like this? Find my hands are hard to steady after painting for a while and they start cramping. Might need to wrap something soft around the tips so they don't mar the plastic but it seem useful.

u/spikeyfur · 1 pointr/relationships

You're likely going to be in a quite a bit of pain after your surgery. You really are going to need a lot of care in the first week post-surgery. I went through this recently with my SO. He broke his ankle in 2 places and had to have surgery to put in a plate and 6 or 8 screws. He was not able to really even move the first few days as he was in so much pain, and it took about a week for him to at least be somewhat comfortable again. I don't want to make you nervous, but I just want to tell you what you could be facing.

See if there is any way possible to have someone in your family or even a close friend come and be with you during this time. Your boyfriend is already feeling overwhelmed now, and it is going to get worse before it gets better. Even if you could rotate people after a day or two, to give your boyfriend a bit of a break, that would probably help. I did it without question for my SO, but we've been together for 13 years and I wouldn't have it any other way. If you and your boyfriend have not been together too long, this could definitely put some strain on your relationship.

After that initial period of pain, however, you should be able to start moving around again. I suggest getting: http://www.amazon.com/Drive-Medical-790-Steerable-Walker/dp/B003VMAKVS/ref=sr_1_1?ie=UTF8&qid=1414551922&sr=8-1&keywords=medical+scooter

or: http://www.amazon.com/iWALK-2-0-Hands-Free-Crutch/dp/B00092RB06/ref=sr_1_1?ie=UTF8&qid=1414551964&sr=8-1&keywords=iwalk+free

**EDIT: If you have the type of injury that would allow for either of these devices. If not, I would definitely look for devices that would accommodate your injury. Being somewhat mobile is the key to your (even limited) independence and crutches are just a pain.

You can probably rent one of the scooters from your surgeon's office, but we found out the hard way that it was cheaper to buy one on Amazon and then resell it when you are finished with it. People told us that the iWalk crutch worked out well for them, too. By the fourth or fifth week post surgery, we were in Vegas with my SO scooting around all over the place. The scooter is a drunk person magnet, FYI. Ha ha

I hope you have a speedy recovery!

u/krimped · 1 pointr/computertechs

I recommend that you have at least one of these: http://www.amazon.com/SE-MZ101B-Helping-Hands-Magnifying/dp/B000RB38X8/ref=sr_1_7?ie=UTF8&qid=1398110354&sr=8-7&keywords=magnifying+glass

And/or one of these: http://www.amazon.com/Carson-DeskBrite-Illuminated-Magnifier-LM-20/dp/B003EW1ZNC/ref=sr_1_18?ie=UTF8&qid=1398110385&sr=8-18&keywords=magnifying+glass

Also, you should have a cheap digital camera to take pictures of customer equipment with. Don't forget to get a decent air compressor so that you don't have to buy canned air. Set the pressure on the compressor to no more than 60 PSI. You will also need a good shop vac to go with the compressor. It will keep dust from flying into your work environment as you clean customer equipment.

u/Fnarley · 2 pointsr/ChapoTrapHouse

Squatting like some kind of 3rd world savage?

Get yourself a squatty potty, like me, an intellectual

u/Cromulentembiggening · 1 pointr/funny

My wife does this too. A few dollars saved our marriage. 3 Ez Plastic Tube Squeezer Toothpaste Dispenser Holder Rolling Bathroom Extract https://www.amazon.com/dp/B0087FIHDW/ref=cm_sw_r_cp_api_kyYmxbZA1D2A3

u/amandaPlusPlus · 1 pointr/amazon

IMO, the best deal is Squatty Pottys on sale.

u/Deyterkerjerbzz · 4 pointsr/gifs

Do you have a Squatty Potty yet?! [What a time to be alive. ](Squatty Potty The Original Bathroom Toilet Stool 7"- White https://www.amazon.com/dp/B00ESKVN7W/ref=cm_sw_r_cp_api_cDSIybGFRKQG9)

u/CupofTia · 20 pointsr/BabyBumps

Ladies, I invested in a squatty potty and it's been a god send! I have major constipation this time around and I can tell it will be my savior post partum. First time around I was just like you!

u/darthjenni · 5 pointsr/dementia

I camp a lot. I have tried many bathing wipes, and camping shampoos. I like Clean Life Products: No Rinse.

The bathing wipes are designed to be microwaved so she can get a warm wash.

The No Rinse Shampoo is also really good. When I am in the backcountry I rinse it out with warm water, but you don't have to.

These people don't mess around. You can get it by the gallon.

u/simplythere · 7 pointsr/xxfitness

I've never had jock itch, but since I grapple, there's a high risk of spreading skin infections like ringworm. I use a body wash with tea tree oil on gym days. I'll also use the Defense Soap Body Wipes when there might be some time before I can get to the shower. Instead of wiping down benches at the gym when I lift, I bring a towel to cover it so I can reduce skin contact with the equipment (my sister got scabies from the gym before her wedding so I'm super wary of it now). I also put a clean towel over my car seat when I'm driving home to reduce the spread of gym germs.

u/ShadowL42 · 1 pointr/funny

You HAVE to get one of these

I got one last year ant it is amazing, they are pretty cheap, get one for sun block, and one for the lotion after.

u/wherearemygoggles · 5 pointsr/DIY

This is the 7.5", which is much more similar in height to the Liberator wedge.

The one you have listed is comparable to the ramp pillow, which can be great, depending on your needs.

u/wblock · 1 pointr/electronic_cigarette

Just got mine yesterday for $6... Amazon Prime, free shipping.

Edit: Link included