Reddit mentions: The best nail pullers
We found 40 Reddit comments discussing the best nail pullers. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 18 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Crescent 11" Nail Puller Pliers - NP11,Red/Black
- The functionality of the pliers allows you to easily remove nails from the front or back ot the wood.
- Unlimited flexibility allows user to easily extract nails regardless of size or if head of nail is damaged or removed
- The durability of forged steel head and handles create a durable tool with rubber grips for comfort and control
- Dual handles make it quick and easy to grip, roll, and remove nails or staples
- Check out the full line of CODE RED Demolition/Renovation tools from Crescent
Features:
Specs:
Color | Red/Black |
Height | 0.75 Inches |
Length | 11 Inches |
Number of items | 1 |
Size | 11 inch |
Weight | 1 Pounds |
Width | 3.25 Inches |
2. Crescent 19" Nail Puller - 56
Forged alloy box-joint and Hardened, tempered jawAvailable in short or long jaw designsBlack enamel finish offers extra durabilityMeets or exceeds U. S. Federal Spec. GGG-P-79Lb, Type 1, Class-1Works great on flush, hard-to-grip nails
Specs:
Color | Black |
Height | 1.5 Inches |
Length | 19 Inches |
Number of items | 1 |
Size | 4 inch |
Weight | 3.89 Pounds |
Width | 5 Inches |
3. Estwing Nail Puller - 12" Double-Ended Pry Bar with Straight & Wedge Claw End - DEP12
- FORGED IN ONE PIECE – The most durable, longest lasting striking tools available
- HIGH LEVERAGE DESIGN – Rounded head for added torque & increased leverage
- BUILT FOR THE PRO – Carpenters, wood workers, demolition crews, framers, roofers, tradesmen & serious DIYers. Perfect for window & door trim, molding and baseboard
- WORK IN SMALL SPACES – The Precision thin claw allows the user to access hard-to-reach and confined places
- REMOVES HEADLESS NAILS – Claw designed allow for headless nail removal with minimal wood damage
Features:
Specs:
Height | 11 inches |
Length | 11 inches |
Number of items | 1 |
Weight | 1.21 pounds |
Width | 1.1 inches |
4. Shark Corp 21-2020 7-5/8-Inch Nail Puller
All SharkGrip nail pullers and prybars are forged from the finest heat-treated Japanese alloy steelThe pulling "V" is hardened to a Rockwell 50-52 hardness, then hand-finished for accuracyThe resulting tool is so strong it can even bite into hardened and stainless steel nailsHandles nails from 3 to ...
Specs:
Height | 1 Inches |
Length | 9 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.14 Pounds |
Width | 3 Inches |
5. ATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS
Bearing Extractor Collets With Internal Capacity From 3/8" (10mm) To 1-1/4" (32mm)One Slide Hammer Assemble & ClampOpen Clamps By Turning Handle Clockwise To Snug Against The BearingFor Pulling Out Evenly Without Damage The PartsFully Chromed Carbon Steel Slide Hammer, 15" (382mm) Overall Length
Specs:
Height | 3.149606296 Inches |
Length | 15.354330693 Inches |
Width | 11.417322823 Inches |
6. BAHCO 38 17 3/4 Inch Nail Puller
High leverage design allows greater pulling torque for removing well-imbedded nailsEasy and fast operation for opening wood crates Hardened jaws for durability and long lifeIt is of durable quality and highly efficient
Specs:
Height | 7.086614166 Inches |
Length | 11.023622036 Inches |
Number of items | 1 |
Size | 17 inches |
Weight | 4.87 Pounds |
Width | 11.023622036 Inches |
7. Draper Automatic Centre Punch
heavy duty spring loaded pointhardened steel pointadjustable striking force
Specs:
Height | 0.3149606296 Inches |
Length | 5.7480314902 Inches |
Number of items | 1 |
Size | 1 - pack |
Weight | 0.1984160358 Pounds |
Width | 2.755905509 Inches |
8. Air Locker AP700 Nailer/Nail Remover Kit with Extra Driver
This is a bundle of 2 items. 1ea AP700 and 1ea of DAP700.1 - AP700 Professional Punch Nailer/Nail Remover1 - DAP700 Piston Driver AssemblyPunch, remove or sink nails between 10-20 gauge sizesIdeal for recycling wooden pallet or case
Specs:
Height | 2.49999999745 Inches |
Length | 10.99999998878 Inches |
Weight | 1.12 Pounds |
Width | 9.9999999898 Inches |
9. C.S.Osborne &Co. No. 763 Staple Lifter (2 1/4" Blade, Red Handle)
- ✅ Durable forged steel. Nickel plated.
- ✅ Red color makes it easy to spot.
- ✅ Designed to dig down and to remove staples quickly.
- ✅ Made in the USA
Features:
Specs:
Height | 6 Inches |
Length | 2 Inches |
Width | 2 Inches |
10. Dewalt DWHT55524 10 in. Claw Bar
Nail digger exposes the head of a flush nail so it can be pulled with minimal damage to the woodExtra wide strike surface helps user accurately strike the bar to get under a nail or behind material to pryI-beam shaft provides strength without adding weightPointed penetration end digs into material t...
Specs:
Color | Black |
Height | 1.5 Inches |
Length | 11.6 Inches |
Number of items | 1 |
Size | One Size |
Weight | 0.8157103694 Pounds |
Width | 2.9 Inches |
11. Welldoit Tack Puller For Extracting Hard to Remove Nails Pack of 2
- Material:Chrome vanadium steel alloy.
- Size:Total length 7.87".
- For extracting hard-to-remove nails.
- Ergonomic design with leverage feature for comfortable use.
- Ideal for upholstery and picture framing projects.
Features:
12. Dasco Pro 933 Tapered Jointer with Round and V Pattern, 1/2-Inch
Specs:
Height | 0.5 Inches |
Length | 0.5 Inches |
Weight | 0.15 Pounds |
Width | 0.5 Inches |
13. Stanley 55-116 8-inch Nail Puller - Chisel Scraper
8" Nail puller - chisel scraperForged high-carbon steelHeat-treated for durabilityTempered for safetyPolished, beveled claws allow precision nail pulling and prying
Specs:
Color | Black |
Height | 0.6 Inches |
Length | 9.5 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.49 Pounds |
Width | 1.8 Inches |
14. WINMAX TOOLS AUTOMOTIVE 16pc Blind Hole Pilot Bearing Puller Internal & Extractor Remove w/Slide Hammer
- DURABILITY, this bearing puller set features high hardness and toughness for optimal performance. Collets made of chrome molybdenum steel ensure rust-proof performance and long-lasting using.
- WIDE COMPATIBILITY, comes with various size and type of collets, Blind / Internal /Bearing Puller, this tool set boasts wide compatibility
- EASY TO USE, this kit is easy to use, just insert the collect and expand it to fit the hole
- PERFECT FOR PROFESSIONAL AND DIY USE, ideal for pulling jobs and will not damage parts in using, perfect for professional and DIY use.
- PORTABILITY, comes with a durable storage case, you can neatly collect the tools and easily bring it to anywhere you like.
Features:
15. Narex Tack Lifter Upholstery Staple Remover with Beech Wood Handle
- Made by a small tool manufacturer in the Czech Republic
- Has a 5/16” (8 mm) diameter blade that flares to produce the tongue
- Tongue is ground and not stamped or molded
- The blade if made from carbon steel which is hardened and tempered
- Handle has a metal ferrule to withstand torque. Overall length is 8”.
Features:
Specs:
Height | 3 Inches |
Length | 6.37 Inches |
Width | 13.5 Inches |
16. Dead On Tools EX9CL 10-5/8-Inch Exhumer Nail Puller, Silver
- Trusted and used by experts
- Quality assured products
- Proven and Tested for durability and function in real world conditions
- A true performance product
- Designed with the skilled craftsman in mind
Features:
Specs:
Color | Silver |
Height | 3 Inches |
Length | 7 Inches |
Number of items | 1 |
Size | 10-5/8-Inch |
Width | 3 Inches |
17. decotacks Upholstery Tacks for Furniture, Upholstery Nails for Sofa & headboards, Thumb Tack Push Pins, 7/16" Head - 100 PCS/Box [Antique Brass, French Natural] DX0511AB
- 100 Pcs/Pack, Head Diameter [7/16 in] *** Full Length top the bottom [5/8 in] *** Shank Length under the cap to bottom [1/2 in]
- Upholstery Tacks, Made by full automatic German machines with HQ Steel and Double layer electroplated
- Strong and heavy weight items for upholstery industry
- Don't use any chemicals to clean nail heads, it may damage the surface finish in time, so please just clean them with dry cleaning cloth.
- You won't be disapointed, they will always stay bright & beautiful. Please don't use any chemicals to clean nailheads, it may damage the surface finish in time, so please just clean them with dry peace of cloth.
Features:
Specs:
Color | Antique Brass, French Natural |
Height | 0.007874 Inches |
Length | 0.031496 Inches |
Number of items | 100 |
Size | 7/16" |
Weight | 0.20282528104 Pounds |
Width | 0.031496 Inches |
18. Task Tools T47060 Cat's Paw Nail Puller
- Nail puller for recycling lumber, re-installation
- Double-ended for wiggling in underneath head, then prying out with force
- Heavy-duty steel construction for optimal durability
- Measures 10-Inch (length)
Features:
Specs:
Height | 0.75 Inches |
Length | 10 Inches |
Number of items | 1 |
Weight | 0.75 Pounds |
Width | 3 Inches |
🎓 Reddit experts on nail pullers
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where nail pullers are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Hey that's awesome! Congrats.
I don't think the 22 is too heavy, but it needs to be smooth faced. That's basically what I have.
A plane is very handy, I would get a low angle block plane (maybe that's what /u/Guyrannosaurus_Tex meant in his comment). However a crappy block plane might be worse than no plane at all IMO. The Stanley is decent but I wouldn't go lower than that price-wise. You want the low-angle for trimming end grain. Not absolutely necessary but a lot easier. I use it a lot when I'm running trim and need a quick adjustment and don't want to go back to the saw. A smaller one will be handier (more portable) than a big one. My go-to is actually this guy, https://www.lie-nielsen.com/product/small-block-planes. But I think the Stanley or similar is fine to start. You have to keep it sharp though.
For other tools besides what Tex mentioned, a pair of diagonal or end-nipper pliers, a small cats paw (the Japanese style is nice for finish work (like this https://www.amazon.com/Shark-Corp-21-2020-8-Inch-Puller/dp/B00004TBQE/ref=sr_1_1?ie=UTF8&qid=1468101411&sr=8-1&keywords=japanese+cats+paw), a scribe (like this https://www.amazon.com/General-Tools-843-Compass-Scriber/dp/B00004T7R8/ref=sr_1_1?ie=UTF8&qid=1468101493&sr=8-1&keywords=pencil+scribe), a few chisels (a 1/4" and a 1/2" will probably be most versatile to start), a chalk line (blue chalk). and perhaps a stud finder.
Most of all, look at what your co-workers have. That'll be your best clue to what's useful in the type of work you do. Good luck!
edit: Hey, there's one other tool you should get -- the habit of constantly learning :) - check this site out, http://www.thisiscarpentry.com/
I used this earlier this year to redo my 3/4” western red cedar fence. It was gapped pickets before but I wanted it to be privacy style. This was awesome to reuse all the old boards. If the nails are extremely angled and set deep, it will take a chunk of wood out with the head. The nails in my fence were 11 gauge aluminum screw shanks and presented no problems. If you hold it flush the piston will create an additional divot in the wood that can be avoided by giving it a little space. I’m happy to own one though. I wanted to buy an extra piece so I could modify it and Air Locker hooked me up with a link and a reasonable price. Great CS.
It can also be used to drive things on through wood.
For anyone removing nails, I suggest adding this to the combo. Crescent 11" Nail Puller Pliers - NP11 https://www.amazon.com/dp/B008NM6VAA/ref=cm_sw_r_sms_c_api_i_7mHPDbW5Y7VYA
I have had some luck with bearing pullers on a bearing like this. These usually are not stuck too bad. If you by the cheap puller in the link it might work once. A good puller kit will be $250 and the difference will be the hardness of the steel. The cheap set will be mangled after one use and hopefully will last long enough to pull one bearing
https://www.amazon.com/ATP-Bearing-Puller-Remover-Extractor/dp/B075YRHWCM/ref=asc_df_B075YRHWCM/?tag=hyprod-20&linkCode=df0&hvadid=309811990469&hvpos=1o1&hvnetw=g&hvrand=944491512671937252&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=&hvtargid=pla-624679758447&psc=1
Nail pulling pliers. When I re-did our floors I tried pretty much everything that has been suggested with varying succes. Part way through the project I picked up some nail pulling pliers and they were by far the best. I wish I would have found them earlier.
+1 to what shelbyguns said.
What is your goal/intended purpose? The mission dictates the gear...
That red handled set is probably more suited towards auto mechanic type functionality such as prying an alternator, etc. If that is the goal and you’re looking for options, look into the Mayhew Dominator series. Goes up to 50” IIRC.
If your goal is more along the lines of homeowner maintenance/weekend projects, you may be better served looking along the lines of a a flat bar (such as a Vaughan 15” SuperBar). You can use it for prying trim, light demo, etc. There are smaller versions such as a Stanley WonderBar (7 1/2” & 12” versions available).
A cats paw such as the Estwing nail puller is great for pulling nails and some prying, but the above-mentioned flat bars do a better job in getting into thinner spaces and can do prying as well.
https://www.amazon.com/Vaughan-B215-15-Inch-Original-SuperBar/dp/B00002N5VN/
https://www.amazon.com/Stanley-55-045-7-1-2-Inch-Wonder/dp/B00002X1XS/
https://www.amazon.com/Stanley-55-515-12-3-4-inch-Wonderbar/dp/B00002X1XT/
https://www.amazon.com/Estwing-Nail-Puller-Double-Ended-Straight/dp/B0015YPJMY/
Couldn't quite see it properly but the fact that he didn't move his hand much makes me think it's something like an automatic centre punch. Place at the bottom corner of a window and it will shatter tempered glass pretty well.
They work great too. And still making them like they used to:
http://www.amazon.com/Crescent-56-Nail-Puller/dp/B00002N7SD
Pallet buster and a "punch nailer" were my best $100 spent for tearing pallets apart. Literally cut my time by like 80%. The punch nailer requires an air compressor, but super worth it. Shoot the nails into a bucket with a hole cut in the lid and some water in the bucket.
You'll have so many boards you won't know what to do with them all. It takes all the work out of it. It'll also make you more picky when it comes to your pallets.
https://www.amazon.com/Vestil-SKB-DLX-Deluxe-Pallet-Buster/dp/B00JH41U7M/ref=mp_s_a_1_4?keywords=pallet+buster&qid=1562785117&s=gateway&sprefix=pallet+&sr=8-4
https://www.amazon.com/Air-Locker-Nailer-Remover-Driver/dp/B01H5RNHPA/ref=mp_s_a_1_3?keywords=punch+nailer&qid=1562785154&s=gateway&sr=8-3
Tried actual nail pulling pliers yet?
Crescent 11" Nail Puller Pliers - NP11 https://www.amazon.com/dp/B008NM6VAA/ref=cm_sw_r_cp_api_i_.DKTDb5M86TSZ
Or a more traditional carpenters nail pulling pliers
Channellock 358 8-Inch End Cutting Plier https://www.amazon.com/dp/B00004SBD8/ref=cm_sw_r_cp_api_i_jFKTDbTNNG38H
The latter choice tends to cut smaller nails when you grip them too hard, but then they end up being easier to set. Be advised to slide some thin wood or metal under the side of the plier to protect your floor while you extract.
If the pallets are relatively uniform I'd go with building a jig and using a hammer
But for least setup, the "catspaw" others mentioned is the right tools (technically not sure if this is a catspaw, but it's what you want)
(Crescent 56 Home Hand Tools Nail Pullers https://www.amazon.com/dp/B00002N7SD/ref=cm_sw_r_cp_apa_i_5EW2CbZ0SVAKC)
This one is for weeding dandelions and crabgrass. the reason it works so well is because there is a very similar looking tool for removing carpet tacks.
Tack remover:
This is a high priced, pro quality one.
https://www.amazon.com/Osborne-200-Upholstery-Staple-Lifter/dp/B00KDKTV5M/ref=sr_1_16?s=hi&ie=UTF8&qid=1474465701&sr=1-16&keywords=tack+lifter
And here is a cheap one:
https://www.amazon.com/Silverline-CB32-Tack-Lifter-195Mm/dp/B000LFXMBS/ref=sr_1_6?s=hi&ie=UTF8&qid=1474465701&sr=1-6&keywords=tack+lifter
But for removing staples you would do better with this type of tool:
https://www.amazon.com/C-S-Osborne-Co-Staple-Lifter-Handle/dp/B00T6KT9J8/ref=sr_1_6?s=hi&ie=UTF8&qid=1474465986&sr=1-6&keywords=staple+lifter
nail pullers are small. This page has one pictured in someone's hand.
http://www.homedepot.com/p/HART-12-in-Double-Ended-Nail-Puller-HNP012/206511974
Here is an even smaller one.
https://www.amazon.com/Dewalt-DWHT55524-10-Claw-Bar/dp/B00GO45DK8/ref=zg_bs_553310_7?_encoding=UTF8&psc=1&refRID=N71RNQJXQ6FRHXZ5K44V
If you are into recycling timber, then this nail puller is really good: http://www.amazon.co.uk
you can still get something like this on amazon -
Crescent 56 Nail Puller
https://www.amazon.com/Crescent-56-Nail-Puller/dp/B00002N7SD/ref=sr_1_2?ie=UTF8&qid=1549564377&sr=8-2&keywords=slide+hammer+nail+puller
​
Found this one on Amazon that looks much more like OP's.
Looks a bit like a nail puller to me https://www.amazon.com/Welldoit-Puller-Extracting-Remove-Nails/dp/B0734K5GNL/ref=sr_1_14?ie=UTF8&qid=1541015324&sr=8-14&keywords=Nail+Pullers
Solved!
I found this on Amazon, which is the exact tool. Do you know how it is used? When I google tapered jointer, I only see big machines, and images of what I have here.
I use an Estwing 12" Cats Paw every day at work to pull nails and staples that are often over-driven into wood. Works wonders and has held up really well over the last year.
Crescent NP11 11-Inch Nail Pulling Pliers, Red/Black https://www.amazon.com/dp/B008NM6VAA/ref=cm_sw_r_cp_apa_eAG.zbH8BDC3S
$18, worth every penny
Well, I'm not sure if this is quite what you are looking for, but this looks pretty "heavy duty" to me:
https://www.amazon.com/Stanley-55-116-8-inch-Nail-Puller/dp/B000A26NG8/ref=sr_1_9?
Here are things from my wishlist (past and present)
Wera Screwdrivers
https://smile.amazon.com/dp/B0085NTQJK/
Oscillating blade set:
https://smile.amazon.com/dp/B0109SELWA/
Clamp multimeter:
https://smile.amazon.com/dp/B00NWGZ4XC/
Kreg Jig Jr.:
https://smile.amazon.com/dp/B000J43A7W/
Angled Long Nose Pliers:
https://smile.amazon.com/dp/B00N3VSS4S/
Groove Lock Pliers:
https://smile.amazon.com/dp/B000FK1R0W/
11 ft wifi endoscope:
https://smile.amazon.com/dp/B01MYTHWK4/
non contact voltage tester:
https://smile.amazon.com/dp/B001UAHZAM/
claw nail puller:
https://smile.amazon.com/dp/B0015YPJMY/
Workmate portable work bench:
https://smile.amazon.com/dp/B000077CQ0/
Cable snake fish tape:
https://smile.amazon.com/dp/B000BP7WBO/
9 Outlet metal power bar:
https://smile.amazon.com/dp/B00F8ZQY5M/
Spade drill bit set:
https://smile.amazon.com/dp/B00099E7WE/
36" bubble level:
https://smile.amazon.com/dp/B000UKMWMO/
I’ve got pencils and that very same tape measure.
Looking at this hammer: Stanley STHT51246 20-Ounce Steel Hammer https://www.amazon.com/dp/B00B5A1VVG/
And this speed square (figure the combination square may come in handy later, only a couple dollars extra): Swanson Tool S0101CB Speed Square Layout Tool with Blue Book and Combination Square Value Pack https://www.amazon.com/dp/B00SOVRPXW/
And tool belt:
Bucket Boss 50200 Builders Rig https://www.amazon.com/dp/B00GK4TZ2E/
And cats paw: Estwing Nail Puller - 12" Double-Ended Pry Bar with Straight & Wedge Claw End - DEP12 https://www.amazon.com/dp/B0015YPJMY/
See any problem with these for starting off?
Sometimes called an upholstery staple remover.
nail pulling pliers
Crescent 56 Nail Puller https://www.amazon.com/dp/B00002N7SD/ref=cm_sw_r_cp_api_i_XW24Ab3MK8CSA
Plus many others.
There is a proper tool for this if you don't mind the cost
https://www.amazon.com/Crescent-56-Nail-Puller/dp/B00002N7SD
Here is a link to the kind I have.
Here's the 2019 version. Not much has changed.
I bought that puller on Amazon...use is all the time with pallets
Crescent NP11 11-Inch Nail... https://www.amazon.ca/dp/B008NM6VAA?ref=ppx_pop_mob_ap_share
Use this to pull the nails first.
https://www.amazon.com/gp/product/B002H1FR1W/ref=s9_acsd_zwish_hd_bw_b2JwM_c_x_w/161-1535904-3017155?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=merchandised-search-5&pf_rd_r=K7PA4CW0DKS4QPVZQ97P&pf_rd_r=K7PA4CW0DKS4QPVZQ97P&pf_rd_t=101&pf_rd_p=6d0faadb-9117-40c7-b8ea-37ffa1163de7&pf_rd_p=6d0faadb-9117-40c7-b8ea-37ffa1163de7&pf_rd_i=553310
Cat's paw. http://www.amazon.com/gp/aw/d/B0015YPJMY
Nail puller.
https://www.amazon.com/Crescent-56-Nail-Puller/dp/B00002N7SD
It is for tuckpointing.
Centre punch for marking metal
https://www.amazon.co.uk/Draper-13612-Automatic-Centre-Punch/dp/B0001K9PB4
Crescent 56 Nail Puller https://www.amazon.com/dp/B00002N7SD/ref=cm_sw_r_cp_api_cLDJzbVJVSF3P
Nail puller. Like this
You can still buy these
Holy shit I just had a moment. It's not "let's get down to brass tacks" it's "let's get down to brass tax"
Edit: how much tax for this? https://www.amazon.com/dp/B00ITJGEAE/ref=cm_sw_r_cp_apa_ulFbAbY4J2DY8
Get a cats paw and pull the nails from the track strip, you should be able to get the majority of them while beating the hell out of the track strip but not touching the floor.
Task Tools T47060 Cat's Paw Nail Puller https://www.amazon.com/dp/B00A8GRQ3K/