Reddit mentions: The best office platforms, stands & shelves

>Or, you know, you just used the cables Apple provided, which they could be certain met the necessary safety standards, unlike some $1 cable that probably doesn't but who cares?

<laughs> You've got a lot of faith in a company that doesn't give a shit about you. Enough to spout nonsense you know nothing about, and called the bluff of the wrong person. The $1 cable I referred to is one I've bought many of, of various lengths, as I don't like messy cables. It's a C7, or C7P plug, and it, like C5 cables plugs, and virtually all other US lamps, largely use the same wire. So much so, it's called "lamp wire". It's a pair of 18awg cable. Now this is the part where your little indignance breaks down, and it's gonna involve numbers that aren't money, so stay with me. 18awg cable is capable of running 10 amps over 120v power, so long as it isn't over 50 feet. The Apple cable is required to provide enough to supply a Macbook with, at most, 85 watts of power. Watts are calculated by multiplying voltage by amperage. So the Apple cable is required to supply 85. My $1 cable you doubt so much is capable of supplying 1200.

Truth be told, the Apple cable is likely 18 as well, possibly 20awg, since they like making money. But at this point it's pretty clear you don't know what you're talking about, but are heavily, emotionally invested in your opinion, and may want to rethink your opinions on Apple and your discretionary income choices.

>Probably because quality and safety cost money, hence the USB power supplies from reputable brands, that won't burn your house down, aren't $1 from eBay.

As I've shown above: No. It's just cuz Apple likes overcharging people, and people who like Apple appear to like getting overcharged, then get very defensive when it's pointed out. I take safety very seriously--more so than I care to explain right now, and far more than you'd likely believe. The $1 cables aren't from Ebay, but they also weren't USB cables. Please try to follow along. USB has become a very convoluted standard that requires a great deal of research to ensure you're getting what you need. There are some dangerous cables out there, so you need to be aware of what you're getting. They're going to cost more than $1, but a 6ft cable isn't $30. That's just you buying an Apple executive another vacation home.

>You won't be buying the stand unless you're buying the monitor.
>
>This isn't for your "gaming rig", it's for people that have the budgets to pay for it, where time is money, and don't want to waste time finding a cheaper alternative.

<googles "VESA compliant monitor mount"> Oh look. I found a cheaper alternative. It only took me <looks at non-existent watch> 10 seconds. At $970 savings, I'm saving almost $350,000 an hour! Boy, that certainly isn't worth "wasting time to find a cheaper alternative." Yeah, if I'm a business with a budget, it's certainly much better to just spend an extra $1,000 for every single one of these monitors we buy. That money clearly couldn't be better spent somewhere else.

But wait! There's more! True to Apple's philosophy of proprietary bullshit I explained earlier, they've made certain their monitor is not VESA compliant. Why, you ask? I'll tell you! This way if people come to their senses (as many have over this) and decide they don't want to pay Apple $1,000 for a ridiculously overpriced stand, they'll instead still be forced to pay Apple $200 for the adapter to that makes the monitor VESA compliant! Either way you go, Apple screws you over! :D

Noticing a pattern?

Oh, and their justification for this bullshit? It pivots between landscape and portrait, and has a magnet so you can disconnect it and take it with you. Now, the $30 option I showed also spins 360 degrees, so I guess they had to up their game to justify this nonsense by adding another feature that seems more like a solution looking for a problem than an innovation. I don't know why anyone needs to quickly disconnect and travel with a monitor that's the size of a small TV--it's not exactly convenient to transport something like that, but I give them points for the sheer audacity of suggesting this level of shit to justify another "innovation" they could use to rip people off even more. Bonus: If they encourage people to carry around a $5,000 monitor, there's a chance it'll get as destroyed just like an iPhone, requiring them to buy another!

Again, noticing a pattern?

Give if a month or so. Someone'll sell a better version of their VESA mount adapter for $50 on Amazon.

>By whinging about the cost of something you aren't required to buy. You don't even need to buy it even to use that monitor, you could of course find your own stand if you're willing to put in the time.

Ah, apparently you weren't aware of the $200 Sucker Tax. :) Yeah, the whole "Oh, but you're not required to buy it! We're doing you a favor!" line falls apart when everyone just realizes even Apple didn't think they could get away with charging an extra $1000 for the monitor by forcing people to buy the stand as well. That make it nearly double the cost of Dell's version, and they wanted to stay under Eizo and Sony. So, instead, it's a $5200 monitor, minimum. They're just milking the intended demographic, hoping they'll shell out more for overpriced nonsense because they're settling for the Apple XDR instead of getting a far more expensive reference monitor, but anyone in that same market is also going to look at others making similar products, so they still have to stay competitive. Brass tacks? You're the one who mentioned the monitor--I don't care about it. I said the stand is bullshit, because the ability to pivot, rotate and "easily disconnect" a 32" display does not justify a $1000 cost. Nor does a simple adapter for VESA compliance justify a $200 cost.

>I say this as someone who literally yesterday had to spend time filing down my new "VESA desk mount" to fit my expensive monitor

I'm hoping you're not saying it would be wiser to spend 1,000 USD than to spend a few minutes filing down a monitor mount. I'll stick with my middle-ground of buying VESA mounts that meet the typical 75 or 100mm standard, as I've never had any issues with them. It sounds like you got a low quality VESA mount, but the wonderful thing about standards is that you can measure both the monitor and the mount, and see who actually screwed up!

So... I would recommend a laptop that you can dock and can do some virtualization.

http://www.overstock.com/Electronics/Dell-Latitude-E6420-Intel-Core-i7-2.7GHz-256GB-SSD-14-inch-HDMI-Laptop/9444363/product.html?refccid=47LBAHF2LWNL7K2O36TPNSKXOY&searchidx=6

You can upgrade the memory to 16Gb and then get a port relicator for multimonitor setup.

http://www.overstock.com/Electronics/Dell-IMSourcing-NEW-F-S-430-3114-Port-Replicator/9048000/product.html?refccid=5XI2HQKY4AW3H2KC6MHEQQND6I&searchidx=0
I recommend this one because it has 2 DVI ports, vga, hdmi, dsub, 5 usb (2 back, 3 side), and basically everything you need in a port replicator.

Those particular laptops come with a 256GB SSD (Samsung, Seagate, or some other vendor, just depends but I've found most use Samsung and Seagate).

You can get 16GB kit would should be plenty for most virtualization and the 2.7GHz has hyper threading as well.

Wireless is I think the Intel 7620-AC Dual band but there is an additonal slot for a secondary card. (I think there is actually 3 slots total but only enough wires for 2 cards).

Network is 10/100/1000



You're going to be hard to find a better laptop with all that for cheaper. Brand new these things run around 1200 - 1500 depending.

Now the only thing that really bugs me when buying those is it's going to be a grab bag on whether you get a 9w (extended battery) or not.

If you don't get a 9w battery then I'd recommend picking one up.

The monitors and everything else is up to you but that would be my recommendation for what you're looking for.

Edit: Forgot these are also super easy to take apart. 7 screws on the back and the panel comes off super easy.

Edit 2: Also, because those sell out, make sure if you go on overstock that the processor is the 2.7ghz i7 if you want to do virtualization.

Also here is the specs on the processor that come with it.

http://ark.intel.com/products/52231/Intel-Core-i7-2620M-Processor-4M-Cache-up-to-3_40-GHz

Edit 3: Sorry keep forgetting things. Those laptops come with some shitty chinese replacement chargers. They can cause issues with the touch pad while charging. However the port replicator (docking station) should come with a legit Dell charger that will work for the laptop as well since it's universal.

Edit 4: Decided to add my personal recommendations for monitors, monitor stand, mouse, and keyboard. You do your own research though.

Monitor x3: Dell E2414H - 1980, Vesa mount, DVI and VGA
http://www.amazon.com/Dell-E2414Hr-24-Inch-LED-Lit-Monitor/dp/B00FE8MKTM/ref=sr_1_2?ie=UTF8&qid=1450473050&sr=8-2&keywords=dell+24+e2414h+monitor

Monitor Stand: 3 Arms I'd go with http://www.amazon.com/Ergotech-Triple-Horizontal-Monitor-100-D16-B03/dp/B001NPEC5A/ref=sr_1_1?ie=UTF8&qid=1450473096&sr=8-1&keywords=ergotech+3+monitor

There are a lot of options with monitor stands but I like Ergotech so YMMV

Mouse: Tons of options but for I really enjoy my G602 http://www.amazon.com/Logitech-Wireless-Gaming-Mouse-Battery/dp/B00E4MQODC/ref=sr_1_1?ie=UTF8&qid=1450473201&sr=8-1&keywords=logitech+g602

Keyboard: I love blue switches and having a numpad on a TKL is amazing. CoolerMaster has some pretty amazing mechanical keyboards. I recommend this one. http://www.amazon.com/CM-Storm-QuickFire-TK-Mechanical/dp/B00A378L4C/ref=sr_1_3?ie=UTF8&qid=1450473227&sr=8-3&keywords=cm+rapid+fire+tk

Otherwise I currently use a the Quick Fire Rapid with blue http://www.amazon.com/Coolermaster-SGK-4000-GKCL1-US-Storm-QuickFire-Rapid/dp/B0068INSUM/ref=sr_1_1?ie=UTF8&qid=1450473343&sr=8-1&keywords=cm+quick+fire+rapid+blue

I recommend browsing on https://mechanicalkeyboards.com/ or /r/mechanicalkeyboards

• Screens:
  Your laptop appears to have a M5970 /w VGA, HDMI and DisplayPort and Eyefinity support.
  I'd recommend x2 of these IPS screens: Dell u2410. These screens have very good picture quality and their connections fits your laptop prefectly. They are pricy, but IPS provides the best picture quality.
  
  You may also check 2412 and the 2312, however they do not have HDMI.
  
  ----
  
  
• Keyboard:
  Mechanical /w Cherry MX blue, or MX Brown if you prefer more silent keys (video comparing sound levels).
  
  Check out brands like DAS, Filco, Leopold, Ducky, wasdkeyboards.com
  
  ----
  
  
• To connect your PS3 to a monitor you have two options: use connect laptop to monitor using DisplayPort cable and PS3 to monitor with HDMI OR purchase a HDMI switch. Then, connect HDMI cable from your laptop plus the HDMI from your PS3 into the switch and connect the switch to the screen. You want a active switchr /w it's own power supply. You can also get HDMI switches with remote control. With the switch I linked, adding a TV above your station would not be an issue at all.
  
  ----
  
  
• For monitor mounts you got two basic options: wall mount or a desk mount/arm. I can't speak for the wall mount, but I have three of those desk mounts and very happy with the purchase. You have to decide which mount fit you best. They both have their advantages.
  
  ----
  
  For your laptop you got countless options. Here's my suggestions:
  
  
• Although this does not hide the laptop in any way, I think a laptop stand like this one looks pretty awesome. An advantage with this setup is that you can tie the cables to the mount's arm and thus always be available. You will always know where the cables are, that they are long enough and you can plug them in to your PC even when sitting.
  
  
• If you have a keyboard tray but don't use it, the tray would be an ideal place to hide the laptop. It'd be completely hidden and have almost the same cable management benefits of the mount.
  
  
• Laptop stand. Just to mention it. Cables everywhere, possibly limited moveability due to cable length, terrible cable management.
  
  ----
  
  
  
  Unfortunately I can't help you with iPad or chair, but I would advice against a glass desk. You will have a harder time with cable management and you will always be able to see your cables. If you get a desk such as the Galant series from Ikea, you get more options for cable management (such as trays and cable holes).

I love them. Bought one new from Newegg on sale for $350 and one from Acer recertified for $280 (which is exactly what this thread is of). They're super smooth if you've got a good AMD card. Even a strong Nvidia card will look great, but won't be able to utilize the freesync like an AMD card could. I've used this copy/pasta in other posts about this monitor, so here it is again.

 

I used this guy's Amazon tutorial on how to put the adapter on, although I got the non-quick set version that comes in seperate tubes.

These are the items I purchased:

• VESA adapter, almost twice as strong as the quick-set.
  
  
• This exact JB Weld, although I got mine from the local Lowe's.
  
  
• Monitor Mount, I went single mount over double, so I could have more freedom of placement.
  
  Here are the pics of my setup. Please note, I waited a full 24 hours before mounting them. I know people get antsy, but just wait!!! Also, when adjusting the monitors for the first time, don't use too much torque, or you might detach the adapter from the monitor. The scratch marks you see on the back of the monitor, next to the adapter are where I sanded it down. I don't care about the way it looks, since my desk is against a wall. You can probably be a bit more careful if you actually care about the looks. I also sanded off the paint from the adapters so I can get good contact between the rough plastic surface and the bare steel plate. The screws that came with the adapters, as long as I washered them out a little, were perfectly fine to use.
  
  There are still some small adjustments I need to make to the way they are lined up, but this is pretty much 99% done. I highly recommend anyone looking for more desk space to give this a shot.

PCPartPicker Part List

Type|Item|Price

----|:----|:----
CPU | AMD - Ryzen 5 2600 3.4 GHz 6-Core Processor | $119.99 @ Newegg
Motherboard | MSI - B450 TOMAHAWK ATX AM4 Motherboard | $114.89 @ OutletPC
Memory | G.Skill - Aegis 16 GB (2 x 8 GB) DDR4-3000 Memory | $52.99 @ Newegg
Storage | Intel - 660p Series 1.02 TB M.2-2280 Solid State Drive | $84.99 @ Newegg
Video Card | Sapphire - Radeon RX 580 8 GB PULSE Video Card | $174.99 @ Newegg
Case | Fractal Design - Focus G ATX Mid Tower Case | $49.99 @ Newegg Business
Power Supply | Corsair - CXM V2 (2017) 750 W 80+ Bronze Certified Semi-modular ATX Power Supply | $54.99 @ Newegg
Wireless Network Adapter | Asus - PCE-AC55BT B1 PCIe x1 802.11a/b/g/n/ac Wi-Fi Adapter | $34.89 @ OutletPC
Monitor | BenQ - GW2265HM 21.5" 1920x1080 60 Hz Monitor | $99.99 @ Amazon
| Prices include shipping, taxes, rebates, and discounts |
| Total (before mail-in rebates) | $827.71
| Mail-in rebates | -$40.00
| Total | $787.71
| Generated by PCPartPicker 2019-07-17 01:03 EDT-0400 |

CPU: This was probably the one part I had a bit of trouble deciding what to go with. Since I'm not familiar with what your workloads entail, I just went for the Ryzen 5 2600. It's the most powerful processor that fits the budget, and I doubt anything you do would require more that a 6 core 12 thread processor. Overkill, maybe, but it will last you a good long while

Motherboard: The B450 Tomahawk is one of the best B450 boards, not a ton to explain here.

RAM: Just a 16 GB kit of DDR4 3000 MHz RAM, nothing special

SSD: The cheapest 1 TB SSD, somehow, even though it is a very good drive. It's on sale on newegg for 10% off, make sure to grab it now.
GPU: It didn't sound like you were going to play any games that needed a ton of GPU power. Heck, even an RX 580 is probably overkill for you. Still, nearly any game can run at 1080p 60 FPS on it, so if you get a new game, you should be fine.

Case: I know you didn't want anything too flashy, and while this case does have a side window and LED fans, it shouldn't pop out too much. Besides, having 2 fans preinstalled takes care of airflow for the components.

PSU: Good, high-wattage PSU from a trusted brand with a 5 year warranty. Enough said.

WiFi/BT card: This is the cheapest ac WiFi card that also has bluetooth, and it has good reviews. Should do fine

Monitor: The cheapest 1080p 60FPS monitor with a VA or IPS panel and VESA mounting. (Also, here's a relatively cheap compatible VESA mount)

I'm gonna triple mount 3 Asus VG248QE monitors (24" screen, each 22.5"wide), and I'm unsure about what mounts I should use. I was eyeing this triple monitor mount, but I don't know if it will perfectly fit my monitors or allow me to curve them inward enough. This is a big deal for me since I want to have three monitors and my tower (9" wide) on my desk (72"), and curving the outer two monitors will make everything fit with ease. That being said, I was also thinking about getting 3 of these single monitor mounts which seem to be cheaper. The only cons I can think of with this is that initial set up will be a drag and the cable management will be less appealing. I assume this method would allow for more freedom with a single monitor, so I'll be able to save more space on my desk and rotate monitors with ease. I'm sorta leaning towards the latter option, but I could really use a second opinion- Should I get the 3x mount or 3 1x mounts? Is there a recommended alternative anyone can vouch for that won't kill my wallet?

Great work!

I do agree, that the 'multi arm' approach is the way to go (EDIT: triple arm minimum, as I just did some testing and with only two arms there is really no way to effectively stabilize 'anything' that you are holding as the item tends to easily rotate out of control), unless you have access to a 3d printer and effectively free filament, etc.

The geared linear approach was done as a 'cheapest' first attempt to duplicate TempestVR's and tomotomox's work in linking a robot directly to VAM. After having done that, and then done the tcp/ip connection, I moved directly now to the multiple servo/axis approach. It is funny how much less printing will be required, lol.

Also, in ref to the geared linear approach, I was working on modifying the gear for the 20kg amazon servo I had bought DS3218MG ( https://www.amazon.com/ANNIMOS-Digital-Waterproof-DS3218MG-Control/dp/B076CNKQX4) as seen here ( https://imgur.com/a/OMaqHPL ), and per the dimensions in the images for the servo, the arm has a stated furthest hole of 23.5mm, turns out I had to do a few prints of test gears as the hole was actually at 24.5mm! Not to mention, where the central 'hub' is, it is different from the MG995R, so, that then now threw off the 'gearing' being properly mated and so then there is play between the rack and pinion, lol! With a multiple servo/axis setup, that wouldn't be an issue at all! The only alignment issues are effectively those due to the proper synchronized control of the 2+ servos.

I looked into using the ram mount too, and like it, but I think I'm going to go with this https://www.amazon.com/VIVO-Monitor-Adjustable-Articulating-STAND-V001/dp/B00B21TLQU/ , it is meant for holding up 22 pound monitors, so I think it shouldn't oscillate too much while the robot is in motion. In addition it can be mounted to a desk, to the side of a bed, and has a nice long articulating arm and 75 and 100mm VESA mounts which will be easy to 3d print something to attach to. A non-clamped version that you could 'sit around' is here https://www.amazon.com/VIVO-Computer-Free-Standing-Adjustable-STAND-V001H/dp/B01FE2BCR8/

So at this point, I'm currently printing the housing for the new multi axis robot for testing, it will be a 3-4 servo setup in the end, might have a few variants. Going to be using an adafruit servo hat https://www.amazon.com/2327-Raspberry-Servo-Development-Board/dp/B00SI1SPHS/ and a raspberry pi and the tcp/ip VAM connection.

Lastly, once I get the multiple axis setup, I will then move to the code/algorithms such that there can be a seemless transition from the VAM 'movements' to the new robot(s) based on it's features. The idea is to make all this as seemless and easy as possible for anyone to do themselves.

And all thanks to TempestVR for all his contributions, without him I wouldn't have done any of this!

2 questions for this monday morning:

1. Dual monitor stand recommendations? Seems like both Mount It! and VIVO are good - i want something where each arm is individually adjustable. Clamp style is preferred but the option to have a stand would be nice too. I have two u2414h's to mount. Is one clearly better than another? Looking at this VIVO and this mount it! - is one better than another or do any of you have recommendations?
   
   
2. RAM timings - i've got 2x8gb G.SKILL TridentX 1866 DDR3 sticks, and a 4790k. According to PCPartPicker, these exceed the Haswell recommendation of 1.5v, and will be downclocked. Should i return and get something like the 1866 snipers, which are cheaper, or will i be fine?
   
   TIA!

DP cables are mostly the same, can't go wrong with monoprice though, they sell some on Amazon too. I think mine is an Amazon Basics though. Yes the stock one is super short that comes with it. I have an odd setup but I originally got a 6ft DP then sent it back as it was to short and ended up with a 10ft.
 
I got this beauty of an arm mount for my X34. I went with the taller pole one as I like more height than most people. I love it, it's great! Anything Ergotron will be great though, the Amazon Basics arms are just relabeled Ergotron but come in black instead of chrome.

Going by your specifications, I doubt you’ll need to spend anywhere near 4k, especially if you only need some 1080p panels.

Unless this is just a personal project and you don’t mind blowing hours upon hours on setting everything up, you’re going about this the wrong way. It’ll be 100x times easier using Windows as your host and just running a single Linux VM (No hardware passthrough and minimal gaming performance impact).

That’s my 2 cents.

Since you have access to a Microcenter, you can get an i7 5820k and a m-ATX EVGA Micro 2 for very cheap.

Parts:

• i7 5820k - 6 core / 12 thread cpu that overclocks very well. It might be a bit overkill for your needs, but you'll be able to dedicate 2 cores to your VM while leaving 4 for gaming.
  
  
• X61 Kraken - A good 280mm AIO. Note the X62 just got released. It's a lot nicer, but performance is pretty much the same.
  
  
• EVGA Micro 2 - Went with a m-ATX motherboard so you could get a smaller case. It still comes with a decent amount of features.
  
  
• 32gb 3000mhz ddr4 - Some low profile dimms that match the color scheme,
  
  
• 1tb ssd to hold your host and VM and a 2tb hdd for your games.
  
  
• GTX 1070 - A bit overkill for a single 1080p 60hz panel (not sure if you wanted to game on all 3 of them).
  
  
• Fractal Node 804 - A good quality case that's 'small' while being able to hold everything and it has 5 expansion slots (rare for a m-atx case).
  
  

• EVGA 650W G2 - High quality power supply that's fully modular
  

  
  

  For your monitors, i went with 3 1080p IPS panels with small bezels and a 29" 1080p ultrawide to sit on top of them (All VESA compatible). A triple monitor mount for the 3 24" panel and a single mount for the 29" panel makes the most sense to me, but I'll leave that up to you. Here's my suggestion: Triple desk mount and single wall mount.
  

  
  

  
  

  
  

  
  

  
  

  
  

  PCPartPicker part list / Price breakdown by merchant
  

  
  

  Type|Item|Price
  

  ----|:----|:----
  CPU | Intel Core i7-5820K 3.3GHz 6-Core Processor | $279.99
  CPU Cooler | NZXT Kraken X61 106.1 CFM Liquid CPU Cooler | $114.99 @ B&H
  Motherboard | EVGA Micro 2 Micro ATX LGA2011-3 Motherboard | $204.99
  Memory | Corsair Vengeance LPX 16GB (2 x 8GB) DDR4-3000 Memory | $89.99 @ NCIX US
  Memory | Corsair Vengeance LPX 16GB (2 x 8GB) DDR4-3000 Memory | $89.99 @ NCIX US
  Storage | PNY CS1311 960GB 2.5" Solid State Drive | $219.99 @ B&H
  Storage | Seagate Barracuda 2TB 3.5" 7200RPM Internal Hard Drive | $64.99 @ Amazon
  Video Card | EVGA GeForce GTX 1070 8GB SC GAMING Video Card | $389.99 @ B&H
  Case | Fractal Design Node 804 MicroATX Mid Tower Case | $69.99 @ Newegg
  Power Supply | EVGA SuperNOVA G2 650W 80+ Gold Certified Fully-Modular ATX Power Supply | $73.98 @ Newegg
  Monitor | Dell U2913WM 29.0" 60Hz Monitor | $269.99 @ Best Buy
  Monitor | Dell S2415H 23.8" 60Hz Monitor | $194.81 @ B&H
  Monitor | Dell S2415H 23.8" 60Hz Monitor | $194.81 @ B&H
  Monitor | Dell S2415H 23.8" 60Hz Monitor | $194.81 @ B&H
  | Prices include shipping, taxes, rebates, and discounts |
  | Total (before mail-in rebates) | $2473.31
  | Mail-in rebates | -$20.00
  | Total | $2453.31
  | Generated by PCPartPicker 2016-11-21 10:29 EST-0500 |

Hi all I am hoping someone could help me.

I have my computer currently sitting underneath my desk and as my floor is carpeted I have my PC sitting on a piece of cardboard until I find something better to sit my PC on.

I'm thinking of buying a Melamine particle/MDF board from my local hardware store - as anything I find on eBay or Amazon is either not the right dimensions or too expensive. I have seen something like this but I don't know if it's suitable or could possibly break.

Would the particle/MDF board be okay? Or if you have any other suggestions that are easy on the bank and safe for the PC I would greatly appreciate it.

ps. I cannot place my PC on top of my desk as I have limited space and my cat likes to be in high places, and I don't want her sitting on top of it if I can help it.

A good headphone stand:
https://www.amazon.com/gp/product/B00MCVOILM/

A cool glass/metal stand thing to put under your tower or monitor:
https://www.amazon.com/gp/product/B00AJHCQD8/

A big long mouse+keyboard pad that like a rug, ties your whole desk together:
https://www.amazon.com/gp/product/B01N0LDFR8/

A cool scissor arm to hold & move your microphone:
https://www.amazon.com/gp/product/B00DY1F2CS/




For things that are more significant than accessories: Get some active studio monitor speakers, a nice dac/pre-amp/mixer, a mechanical or electrostatic-capacitive keyboard, a REALLY nice office chair, and stuff like that. A good battlestation is about a lot more than a big monitor, cool case, and some good processing power.

Desk: IKEA Linnmon/Oddvald. Pretty solid desk for the price, although leg room is a bit lacking, probably upgrading soon.

Chair: DXRacer Formula Series, really helped my posture and got rid of my back pain. Plus I'm a huge gear-head so it's very much my style.

Keyboard: Das Keyboard Professional w/ Brown Switches. This keyboard is fantastic, it's a treat to use every day, feels buttery smooth to type on and build quality is superb. I also have a CM Quickfire Ultimate that I use at work, also browns.

Mouse: Zowie EC2-A. Replaced my old Logitech G400 when it started intermittently cutting out, I think I like this mouse even more.

Mousepad: SteelSeries QcK+ for all that low DPI goodness.

Headset: Kingston HyperX Cloud II. I love this headset, it's super comfortable and has good directional sound.

Speakers: Cyber Acoustics CA-3602 FFP. I use my headset mainly but these are good enough for when I need them.

Monitors: BenQ XL2411Z flanked by two ASUS VS247H-P mounted on an Ergotech Triple Monitor Stand. Finally got the monitor stand this year after using two boxes to hold up my side monitors for far too long. However, the BenQ is probably my favorite purchase out of all of these, would've bought three if it served any real benefit to me.

Random Peripherals: uxcell extended power switch. I keep my computer under my desk so this is handy so I don't have to crouch under my desk to turn on my computer.

Inateck PCI-E to USB 3.0 5-Port PCI Express Card. My motherboard came with a fairly low number of USB ports so this allows me to plug in my printer and external hard drive, etc.

Do you have monitor stands? If not, do your monitors have VESA mounts? Get monitor arms! I got this one when they were $30 each, but they have another (newer looking) model for $40 which is still really good for a gas-spring monitor arm. I've had them since July and they're still working great, I have 3 with 2x 21" and 1x27" monitors. Leaves way more room on my desk and makes it really easy to reconfigure my screens to put one in portrait or whatever. Best random accessory upgrade I've done yet!

So I genuinely was not expecting this to blow up like it has. I might as well answer the questions that have been asked all on one comment as replying to everybody is impossible.

The PS4 is for exclusives and a group of friends are all based on there, so why not the best of both worlds?

The title regarding my 9-5 job is because I lacked a better title.

There is also a HTC Vive tucked away to the left which I am currently borrowing from a friend before deciding to buy one, but I left it out due to the inevitable mess of cables it causes.

https://www.amazon.co.uk/gp/product/B01N64KJ9W/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 - This is the monitor mount. I have seen a few people ask for this.

https://www.amazon.co.uk/gp/product/B01DAYSNU6/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 - This is the adapter I needed for the left monitor, hence it being slightly higher than the right.

https://www.amazon.co.uk/gp/product/B00QLL01BA/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 - This is the left monitor connected to the PC.

http://www.lg.com/africa/monitors/lg-23MP65HQ-P - This is the right monitor. Could only find it via LG's site.

https://www.amazon.co.uk/gp/product/B01798VS4C/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 - This is the mousemat.

http://www.ikea.com/gb/en/products/desks/desk-computer-desks/alex-linnmon-table-black-brown-grey-spr-29047257/ - This is the closest thing I could find similar to the desk I have as I bought it straight from an Ikea store rather than online.

GT OMEGA PRO RACING OFFICE CHAIR BLACK WITH SIDE RED FABRIC https://www.amazon.co.uk/dp/B00I87WSGG/ref=cm_sw_r_cp_apa_mbtEzb1EKZK04 - This is the chair.

Thanks for all of the support! You guys are great.

I'm using a really old, shitty desk purchased from Walmart like ~10 years ago and have 0 problems with stability. I was worried for a little while that it was going to just tip one day or even just break the desk but it's been going strong for about ~1.5 years now.

Here's the mount I'm using...

I have a 27" QNIX and a 22" Asus mounted to it and it's been nothing short of perfect. The arms can be titled and move horizontally but the height isn't very adjustable, at least not easily. You basically set it to the height based on pre-drilled holes on the vertical standing arm (the part that mounts to the desk) and just stick a screw in to hold it there. If you want to adjust height you'll have to remove the screw and likely take the monitors off before sliding it up/down. If you want something that's easily adjustable in height, you'll be spending more in the ~75-100$ range as opposed to ~40$ for a less-dynamic model.

It sounds like you may just have a single monitor though... If you have no plans to add another then I'd just get something like the Amazon Basics for 99$ or the Mount-It! for 39$.

The Amazon model gives you pretty much the maximum adjust-ability but it's a bit pricey (not really, other mounts are just cheap). The single arm Mount-It! I linked is a little more adjustable on-the-fly than my personal mount I posted earlier but costs about the same as the dual-mount.

Also, I use a sit-to-stand desk at work and love it. I get pain in my lower back from my terrible posture and generally can't sit still too long without getting up to walk around a bit. Being able to stand and work whenever really helped limit my back pain and I love being able to move about. The downside is that they're pretty damn expensive... For a reference, we have Ergotrons where I work.

If I had to guess I'd say it was this model specifically. That whole 'desk' mounts on your actual computer desk and can be raised/lowered and adjusted in all sorts of positions.

edit and now that you've got me looking into all of this again, I'm thinking of upgrading to something more adjustable like the Amazon Basics mount but a dual-monitor version. IMO just skip the cheaper model and get something more dynamic like the Amazon mount.

this is what i use with my x34, not the cheapest arm but not too expensive either. there are also versions with shorter poles, but i wanted the taller one so i could get the monitor higher up off the desk as i was using stacked monitors for a time.

it holds it up perfectly though, tons of adjustments and is very solid, basically no shaking when i type or do anything. of course having a solid desk plays a part there too.

https://smile.amazon.com/gp/product/B00689HXI4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


i actually have 2 of these, other is holding a much lighter/smaller 32" 4k monitor now and like the x34 does a perfect job. these arms are strong and very solid.

Not sure if you saw this or not, but figured I would comment in case you missed it. I purchased THIS One for my three monitors. I have the same monitors as you have also. Works GREAT. :)

It will save you money also. Good luck!

You have taught me so much. I'm ordering an arduino starter kit, Gonna mess around with styrene over the weekend. and I have some sweet TvMounts on there way for keyboard and mouse swingouts. Seriously Jag, you have no idea how similar our goals are with our rigs. Im going with your suggestion of screen mounts, cause my previous frankenstein of sheet-metal custom rigged to articulating lamp arms didn't pan out... keyboard too heavy. who knew :(.. lol rookie mistake. I don't know about you, but my motivation was the orginal Chris Roberts' kickstarter video when he's sitting in the Hornet

Instead of using a swing arm to mount the center stick I'm going to build a center console out of mdf that either leg will go around. I looked into base extensions and that's just too much work. Plus with a console I can rig up custom control similar to how you have the two extra switches (which are mad sexy btw).

I've wanted to mount LCDs behind my MFDs. Initially I was going to use 2xASUS memopads(100$ each) and run a PC monitor extender to them or use ROCCAT. I like your method, seems cheaper and smoother.

Again.. Jag, you beat me to the punch on the HUD, well in your case Targeting computer. I was going to implement a HUD akin to the F-16 or any real world fighter with the same concept you employed. LCD lay flat, 45' plexi reflect image. I was hoping to use it with raw game data if thats available in the future.

One different aspect Im doing is an HDMI, peripheral switcher. No matter how much I've tried to make it comfortable, the FPS just doesnt work in the cockpit. So I'm migrating my gaming rig out of the cockpit via HDMI switches and perif switches. At my main desk I have an old gaming PC that I use for less graphic intense stuff. They will both parallel the desk monitor and the desk keyb/mouse. Upon hitting the switches the star citizen rig will become active and taking over those devices so I can FPS more comfortably.

Funny bit is that when I exit the ship in game... I actually have to exit my cockpit and sit at my desk :p

http://i.imgur.com/zVobZ0D.jpg

Yea, 30-40 is not that expensive for a stand. If 30-40 is out of your budget, then I’d understand. You get what you pay for in my opinion. If you have the stock stand, i’d just stick with that. If it is too expensive to buy a new one, i’d just stick it out, wait, and save until it is within your means. Better safe than sorry!

North Bayou Monitor Desk Mount Stand: https://www.amazon.com/dp/B01AI2YGK4/ref=cm_sw_r_cp_api_i_IIfyCbBTCGTN8

This one is $25. If your monitor is VESA compatible, this one isn’t too shabby. It has good reviews on amazon for the price. You can drill it on the top of your desk or clamp it to the side. And if you don’t have amazon prime for the free 2 day shipping, maybe you could ask someone who does to order it for you and just pay them in cash?!

Good luck with the search!

Razer Blade: I give a thumbs up. Have seen people saying some pretty good things about it. The screen thing though... To my knowledge that isn't really a thing... that I know of at least. Maybe the people over at r/SuggestALaptop might be able to help you out with that. My suggestion to you would be to use like a docking station that is one cable to your laptop (USB 3.1 Gen 2 Type C w/ Thunderbolt) and have that run three monitors on a monitor arm like this (remember the monitors would need to have vesa mounting capabilities to do this) and roll with a setup like that for home use and just use one screen while you are on the go. Hope that helps a little and feel free to ask questions.

Additional pictures/gifs if anyone's interested:

https://imgur.com/a/hShEq2F

EDIT: Thought I'd include links for some things being asked for on here. I didn't purchase everything new nor recently so there are some things I wasn't able to ID.

Art/Deco:

• "Kiss More Often" Wall art
  
  • Thanks to those that pointed out that the Amazon tapestry isn't affiliated with or supporting the original artist. I've linked to the artist's store instead
    
• Gold Trellis Wallpaper
  
• Bed Rest Pillow
  
  • I got this at Target but can't find the exact one. Amazon seems to have a bunch.
    
• Bedding/Comforter
  
  • I can't remember where this comforter came from since I've had it for so long. I'd recommend looking out for decent sales or checking HomeGoods for decently priced comforters
    
• Bed Throw Blanket
  
• Couch Throw Blanket
  
• White Corduroy Couch Pillow Covers
  
• Couch
  
  • Found it for cheap on Craigslist and can't provide an ID
    
• Floor Rug
  
  • Found it on Craigslist as well. It's a Safavieh Hudson Shag Rug
    
• Bedside Floor Rug
  
• Anti-Fatigue Mat for the Standing Desk
  
• 5-Arm Floor Lamp
  
• Ottoman with Storage
  
  • Found this on a marketplace (LetGo) and can't find any identifying details
    
• Incense Holder
  
• Duct Tape for Framing and Line Work
  
  Technology/Peripherals:
  
  
• Standing Desk
  
  • Buying the desk without the tabletop knocks off about $100 . It might be a cost-effective solution if you want to build a custom-tabletop/desk for under $300
    
• KRK Rokit 5 Studio Monitors
  
• Studio Monitor Stands
  
• TCL 43 Inch 4K TV
  
• Adjustable TV Desk Mount
  
• JBL 5.1 Home Theater Speaker System
  
  • Look for Amazon Warehouse deals on this stuff. I found a set for $100 below the price for a brand new set
    
• Yamaha RX-V383 AV Receiver
  
  • Found this used on LetGo
    
• Led Light Strips
  
  • I've had my light strips for years so I can't provide a specific ID for mine. I linked to a set that uses the same wifi controller as mine but you can shop around. I used 4 strips to do the bed backlighting, under-lighting and desk backlighting
    
• Led Wifi Controllers
  
  • If you have a led strip that doesn't have a wifi controller, you can purchase a compatible controller to take advantage of home automation

So I just did this and got this:

Ergotech Triple Desk Stand with Telescopic Wings (100-D16-B03-TW)

I'm reasonably happy with it but be aware that the base is very big so you kind of need a deep desk to make it work well (IMO!). I'm not sure if it will work well on your desk.

However, I did want to say that you should get the next size up stand for whatever your monitor size is. For example, if it says "support up to three 21" displays" consider it too small for you and get the stand that support three 24" monitors (unless you just want all three monitors in a straight line). If you want to be able to angle the outside monitors, you will need the ability to extend them just a bit further.

This is what mine looks like with three 24" monitors.

You're going to call me dumb when I tell you this but, I don't run in surround. I think the idea is cool, but the interface is shotty at best. I'll explain. So normally I game on the middle monitor with a stream up on my right monitor and something to read on the left. The surround doesn't have "true" maximize so the windows are basically maximized but still show the border, that annoys me.

As far as the monitors, I love them, albeit I'd like to replace them for the BenQ 24" 120hz.

For me, the case is a sign of power. When I was much younger, my first job was at a computer shop and one of the guys there had a really big case with all kinds of badassery inside and ever since I started making money and building awesome gaming rigs, I've always got a big case.

http://www.amazon.com/gp/product/B001NPEC5A/ref=oh_details_o08_s00_i00?ie=UTF8&psc=1 is my monitor stand.

Yep, I share it with my boyfriend. We both spend a lot of time on the computer at home (working, playing games, redditing), so it was really important to us to have a proper workspace.

We wound up buying two matching monitors (because I'm pedantic like that) and mounting them on one of these. The mount is clamped to the desk itself, which was important, because I didn't want to mount them to the wall, nor drill holes into my table. And the articulating arms allow us to push the screens back against the wall whenever we have friends over so that we can use the whole table top.

Our laptops, miscellany papers and other things that are plugged into the monitors are all underneath the table on two wire IKEA rolling cabinets.

I absolutely love, love, love our setup. We don't distract each other while we're working because our line of vision is blocked by our screens, but we're close enough to play footsies. We have the whole length of the dining table to work, but everything tucks away whenever we have people over for dinner.

My only complaint, is that our monitors have to stay at the same height because of the monitor mount, so sometimes we bicker about the screens being too high (him) or too low (me), based on the way we sit. Not a deal breaker though, for all the other benefits the set up provides. I'm sure that if I weren't lazy I would also be able to find a setup that has independent height setups.

I personally wouldn't recommend a Hackintosh unless you are willing to learn a little bit on your own, or have a friend who can help out. The problems with a prebuilt machine from a random entity are:

• Returns may be a pain, unless he provides you with receipts and everything required for all manufacturer warranties. Even in these cases, you need to take out parts and handle the process yourself.
  
  
• Updates can sometimes cause issues (not often, but they can) and if you don't have a rough understanding of things you could end up with a computer that isn't working and no idea how to fix it.
  
  
• Applecare - with an iMac you have the option of a solid warranty, and you can basically just bring the computer to an apple store to get it fixed with very little frustration or questions. I'm not saying you need the applecare, but it is a nice option for many.
  
  
• The resale value of an iMac will decrease over time, but it is still relatively easy to sell an iMac. Custom computers are much harder to sell, and often lose value much faster.
  
  
• This build doesn't have thunderbolt, which is very handy over time.
  
  
  This is obviously your decision, I just know from experience that I have had to extract data from my hackintosh, and reinstall everything because I managed to screw something up with an update. If I had purchased the computer it would have been frustrating to still end up doing al the work despite spending $300-400 extra to avoid it.
  
  If you do go this route and want a monitor suggestion, I really love LG's 34UM95. It is a 34" 3440x1440 res monitor with great picture quality. You need to hook it up via display port or thunderbolt (this build has display port) to get the full res at 60hz, but it is definitely worth the money. I use mine with an ergotron LX monitor arm with the tall arm (see http://www.amazon.com/gp/product/B00689HXI4)

thanks ! and thank god to the chair.... xD i am not a huge fan of the chair i had during orientation -.- wasn't the most comfortable.

thank you for the input on the desks, i have been trying to figure out if i can use something like this

http://www.amazon.com/gp/product/B0052AWGLE/ref=ox_sc_sfl_title_3?ie=UTF8&psc=1&smid=A1Q5TXAPOS7WLS

on a desk...or if i have to go with one that is sitting on top of the desk.

thanks again :)

They are a bit more expensive, but ErgoTech makes some amazingly solid mounts. great cable management, adjustable in just about every way, and can be free standing. This one seems to fit your bill for about $180 on Amazon:
http://www.amazon.com/Ergotech-Triple-Horizontal-Monitor-100-D16-B03/dp/B001NPEC5A/

I first bought a similar stand for my 3 monitors, but I found that the angle wasnt good enough so in the end I tried a couple others but ended up with this one:

http://www.amazon.com/Ergotech-Triple-Stand-Telescopic-100-D16-B03-TW/dp/B007BD0MPM

Its really good and saves you alot of space and looks nice. I'm not going back from using one. I agree with what Phazon_Metroid said, that if you want to move them its gonna be a hassle, but Im getting older and dont go to LAN's like ever anymore :)

Get three of these:

North Bayou Monitor Desk Mount Stand Full Motion Swivel Monitor Arm Gas Spring for 17''-27'' Computer Monitor from 4.4lbs to 14.3lbs https://www.amazon.com/dp/B01AI2YGK4/ref=cm_sw_r_cp_apa_i_m-kaCb5YAD47C

Those are just the ones that I got. They make them for larger monitors as well. My largest monitor is a 27".

I have a triple monitor setup and use one of these mounts for each monitor. I can adjust all three monitors independently. I was also able to independently adjust the mounting location of each arm because they're each separate units. I, like you, have three non-matching monitors. Using three of these should accommodate the issue you've described. IMO, having three mounts is better than a single, triple monitor mount because of the versatility in placement and adjustment for each monitor. They're only $20, too. Another thing I really like about them is that the desk mounting hardware comes with two options: clamp (for edge clamping) and bolt on (for more secure and permanent desk mounting). They also have a very small footprint and so they take up very little desktop real estate. I'm very happy with these mounts and I highly recommend them.

I got this one Amazon Warehouse for ~$37: http://www.amazon.com/Mount--Monitor-Adjustable-Screens-MI-752/dp/B0052AWGLE/ref=sr_1_1?ie=UTF8&qid=1464017127&sr=8-1&keywords=mount+it+dual+mount

It holds my 34" (~22 pounds) and my 27" (not sure). They both FIT in landscape too, but just BARELY and with about a 15 degree angle. 29 would defintiely fit. Its very sturdy, I have to really tigthen up the screws that allow for adjusting the monitor tilt but your 29" will probably weigh less than the max 22 pound

consider something like that or two singles.. I still haven't decided which would be better but I'm happy with mine

I like the design, one suggestions why not switch over to the OLOV Leg just in case your floor or carpet is not level. I've had great luck with 6 of these legs making my desk rock solid.
 
Also I had used a similar shelf design to support my monitors but eventually went to a pole mount setup, The shelf limited the height of the items I could put under it and I really like having the open space
 

Double mount
 

Triple mount
These are VERY strong and inexpensive as well.

Thanks! I’m actually using two of these. They have some mixed reviews, but I like them. The only issue I have with them is the cable management isn’t 100%. So I just have Velcro strips holding cables to the arms. Other than that they’re pretty great. I don’t use the USB ports on them for now.

Are you sure you bought that exact one? Because it absolutely has VESA compatibility -- it is literally only VESA-compatible.

Also, as you can see from the diagram, it is quite adjustable. In fact, both items have the exact same set of rotational axes -- the only thing that could vary between the two are the angles through which each axis rotates and the length of the arms. The Monoprice mount must have longer arms, if it's able to hold 34" monitors, making it more adjustable. But to say one is much more adjustable than the other seems over-dramatic. Something like this would be much less adjustable.

Also, some of the adjustable screws are concealed by plastic casings. They easily pop off, allowing access to adjust them, but the instruction manual failed to mention their existence. I only knew to look for them because I saw them referenced in a review. Perhaps, because the instruction manual doesn't mention them, you weren't aware of these extra adjustable parameters and misinterpreted the mount as less adjustable than it really is?

I have this one, which is the single-arm version of the one I linked above and I think it is very well-built/sturdy. The Monoprice is probably sturdier -- it would need to be, in order to hold more weight. If you need to mount something bigger than 27", definitely go with the Monoprice. But I have used the North Bayou mount to mount a XB270HU, XB271HU, XG2703-GS, and an older/heavier LG monitor -- all of which are 27" -- and the mount is rock-solid.

I'm not saying that the North Bayou is better than the Monoprice -- I've never used a Monoprice monitor mount and can't make that comparison. In fact, I would assume the Monoprice is better, since it can hold larger monitors. But the Monoprice is more expensive and, for me, the cheapest shipping is $12.19, bringing the total cost to $63.38, before tax. The North Bayou mount is only $38.16, before tax, making it $25 / 40% cheaper, and comes from Amazon. In my own experience, it is very sturdy and highly adjustable -- if my 27" monitors are being sturdily held in place and can be adjusted through any of the positions I'd realistically use, I don't think I'd gain anything from spending the extra cash.

I just want to make the distinction to anybody reading this that, even though the Monoprice mount might be a little sturdier/more adjustable, the North Bayou is absolutely more than adequate and is a crowd-favorite on r/buildapcsales (search through the previous listings, everyone speaks very highly of them and considers them to be exceptional quality for the price, including myself). Everyone is entitled to their own opinions but, if you're only mounting 27" monitors or smaller, the North Bayou option seems like a no-brainer to me.

I recommended these Mount it! brand monitor arms in another thread here the other day. I found them from seeing it in someones battlestation pictures and with his recommendation to someone I purchased a double and single arm for my triple 27" setup.

Pros:
Fantastic value,
very solid construction,
no sagging,
light padding on the part that gets clamped to the desk(so no desk scratches),
All that sweet sweet desk space freed up

Cons:
It takes some time and an allen key to get each individual joint to move in fluid manner with respect to your preference in being able to pull/push and rearrange them at will.

As for the TV I don't know what the mounting pattern is on your TV nor the weight. Those are two things you should check out before you order the mounts

Looking good, but I have two inexpensive suggestions: get this for a PC stand and get this for your headphones

I just received the glass stand and I like it a lot, used it to raise up my monitor and free up space for my keyboard and my backup HDD. It'd fit/look a whole lot better than that silly AC retail box ;)

All monitors have to run at the same resolution, so you would have to run the center monitor at 1080p when playing in surround. If it's a different size than the other two, it will be difficult to arrange them so the edges line up smoothly. You'd have to have the side monitors significantly closer/further away than the center to make things transition smoothly from the center to the sides. It may not bother you, but even having my side monitors slightly off broke the whole "window" effect for me. I bought this stand, and it's been decent enough. The base is a bit cheap, you have to get a bit rough with the arms to get them perfectly symmetrical, but it works great once it's set up. If I had it to do over again, I might have gone with something like this, then used a separate arm for the top monitor.

Sure thing!

I had to make a custom wood piece to get around a metal bar under the table, and disperse the clamping force from the 2 screws. Since this is a glass table i did not want to clamp directly to the glass. Just some particle board and screws. For the cabling, i utilized the built in wire supports on the mount arms, and black zip ties. Kind of a rats nest underneath the table, but i tried to clean it up as best i could compared to how it was before.

My monitor mount is something like the - supplied by my work so not sure the exact product.

Those monitors don't look identical, but you MAY be able to flip all 3 vertical and create a DIY ultrawide situation. That would give you more horizontal desk space so the TV isn't so crowded.

This one has arms you can adjust, but only horizontally (and tilt), you couldn't change any heights.

Same story with this one, but arguably easier to ensure things are more aligned. (This is what I use for 2 monitors that aren't identical and it works well enough.)

This one would let you play with heights, but is 2x the price of the others for that reason.

This was me playing with the idea of 2 horizontal and 1 vertical.

Hi! I'd definitely recommend a mount, as it clears up a great deal of desk space. I'll post a link to the one I got off Amazon below. As far as mounting it, if you have the exact same desk then the mount/clampdown screws should line up perfectly with the metal frame under the desk on any of the corners. If you have any other questions or want more detailed pics just PM me.

Mount-it! MI-751 ! Single Monitor... https://www.amazon.com/dp/B0052ATODM?ref=ppx_pop_mob_ap_share

It's stupidly expensive, but I got something like this as a gift a while back and I love it:

http://www.amazon.com/Ergotron-45-245-026-Side-By-Side/dp/B0036FQ23A/ref=pd_sim_pc_8?ie=UTF8&refRID=0VNB6YD8NQVYER90979T

Clears up the space under your monitor for other things, lets you push your monitors out of the way and have a full sized desk for non computing things etc. It's fantastic.

The specs say it only supports up to 24" monitors and since my middle monitor is 27" i don't think it will work / fit. Thanks anyways though.

EDIT1: Ah, i did fine this from the suggested search results which i think should be fine. Thanks again :)

The Desk/Workspace:

• GeekDesk Max (78.75")
  
• APC BE750G Battery-Backup UPS (mounted under desk on the far right side with 5" metal brackets)
  
• IKEA Signum cable organizer (mounted under the far edge)
  
• 10 port USB hub (mounted near cable organizer)
  
• IKEA's Aeron knockoff, Markus
  
• Sublime Imprint Anti-Fatigue Nantucket Series Comfort Mat
  
• JVC HARX900 Headphones
  
• Keyboard: Microsoft Natural 4000
  
• Mouse: Microsoft Trackball Explorer, the world's most comfortable trackball - in use for 8+ years and counting
  
• Monitors:
  
  • Center: Dell Ultrasharp 24" (IPS display)
    
  • Left: Samsung 24" Syncmaster
    
  • Right: Gateway FHD2401 24"
    
• Monitor Arms:
  
  • Right: Ergotron LX Dual Side-by-Side
    
  • Left: Ergotron LX Desk Mount (single)
    
• Monitor connectivity:
  
  • Center: Direct DVI (PC)/DisplayPort (Mac)
    
  • Kensington USB-DVI Multi-Display Adapter (DisplayLink)
    
  • Plugable UGA-2K-A USB-DVI (DisplayLink)
    
    PC:
    
    
• Case: LIAN-LI PC-7F ATX Mid Tower Case
  
• PSU: Kingwin LZP-550 80+ Platinum 550W PSU
  
• MB: MSI P67A-GD65(B3)
  
• CPU: Intel Core i7-2600K
  
• RAM: 16GB Crucial Ballistix PC3-16000
  
• HDD: Crucial 256GB M4 SSD
  
• GPU: EVGA GTX 460 Superclocked EE
  
  Mac: 15" MacBook Pro, Core i7 2.5 GHz, 8GB RAM, 256GB SSD
  
  Usage:
  
  I don't have a KVM, but I simulate having one. All my peripherals - keyboard, mouse, webcam, left & right monitors, are plugged into the USB hub. In PC mode, the USB hub is plugged into the back of the Dell monitor, which is in turn plugged into the PC. In Mac mode, the USB hub is plugged directly into the MacBook Pro. I keep both a DVI cable (for the PC) and a DisplayPort cable (for the Mac) plugged into the Dell monitor, and I use the monitor controls to switch inputs when going between platforms.
  
  I know there are software solutions for sharing keyboard/mouse between computers, but I'm generally working on one computer or the other - I'm rarely, if ever, working on both.
  
  I use the MacBook Pro for daily work (Java/web development, Photoshop/Illustrator), and the PC for hobby work (C#/.NET) and gaming.
  
  The MBP is thin enough that I can slide it under the keyboard to get a total of 4 screens. I generally use the MBP screen for Skype & Campfire windows.
  
  EDIT:
  
  T-Rex Themed Art for those interested, clockwise from the left:
  
  
• Drinking With the Dinosaurs from Unusual Cards! on Etsy
  
• But you won't exist until the late cretacious period from Tiffany Ard on Etsy
  
• T Rex by Ryan Berkley on Etsy
  
• Useful Appendages by Miranda Brandon on Etsy
  
• Mr T. Rex by Jon Stich on Etsy
  
  

I have this one: https://www.amazon.com/Nоrth-Mоtiоn-Spring-Cоmputеr-Mоnitоrs/dp/B01AI2YGK4/

It can be clamped to the desk but also screwed through the desk. I think that's what you want.

I am just not entirely sure if it will support the weight of the AW. Until today i had a LG 34UM65-P on it and that worked perfectly, no sagging or anything like that. Didn't try it yet with my new X34P which just arrived today. But i am quite positive it will work with that as well. And i guess the AW has a similar weight.

I love the northern bayou, I really do but I loved the aesthetic of this more because the monitor hides the mount almost completely. The northern bayou is probably best bang for your buck, considering the amazonbasics mount I have for my ultrawide ran me about 100$ usd. I use the bayou now for my pc workshop, so its still in use.

This was the northern bayou i was using https://www.amazon.com/North-Bayou-Monitor-Computer-14-3lbs/dp/B01AI2YGK4/ref=sr_1_4?ie=UTF8&qid=1537904967&sr=8-4&keywords=northern+bayou+mount&dpID=415YbkXLaBL&preST=_SY300_QL70_&dpSrc=srch

I have one of these and would recommend it, if there is a way to remove the monitor mounting from the desk. Obviously there is a massive footprint on the desk, however there are other options available as I am sure you are aware. But that would be my two cents, again best of luck. :)

I have a Quik Lok Z-555 with a few accessories (speaker stands, rack mount, monitor shelf, mixer). It was a bit expensive but it's held up through several moves over approx 15 years, and it's pretty quick to assemble / disassemble. http://www.quiklok.com/catalog/?p=productsMore&iProduct=190&sName=Z-555

I just recently bought 3 of these stands. They're the cheapest ones I could find on Amazon but they're perfect. I set my first "row" of gear directly on the table, then subsequent rows on these stands, angled up (I just made the back legs longer). Cable clutter, hubs, and thru boxes are hidden underneath (with lots of velcro cable ties ). http://www.amazon.com/Kantek-Single-Height-Adjustable-Monitor-MS400/dp/B001HA6KOC

I don't have a good picture of my whole setup but this is basically what the desktop looks like with some gear angled on the Kantek stands. http://imgur.com/KJ5HIvo

I think what you want is an Ergotron LX Mount but they're pretty pricey. HOWEVER, there are unbranded ones (branded by HP, but totally 100% ergotron) for almost half the price here. I have 3 of them and they support my giant Crossover 27Q. I can go from portrait to landscape just by grabbing the monitor and spinning it. I highly recommend them.

You also may want to check out some of the Monoprice offerings here for even less money. I had the dual one for around 60$, but it only moved side to side- not up and down.

I recommend looking on Amazon.com at brands like Vivo, Mount-It, and AmazonBasics for good mounts for reasonable prices.

If a single triple monitor mount is not enough to properly fit all of the monitors you could get 3 singles. Make sure all of your screens have VESA mounting holes. If they have different VESA mount sizes you can get size adaptors.

Triple monitor mount 1: https://www.amazon.com/dp/B00BDT072S/ref=cm_sw_r_tw_dp_U_x_VD5OCbJX1ZC75

Triple monitor mount 2 (more flexible): https://www.amazon.com/dp/B06X9D7JWP/ref=cm_sw_r_tw_dp_U_x_uD5OCbF76S6YM

Single monitor mount (X3): https://www.amazon.com/dp/B00B21TLQU/ref=cm_sw_r_tw_dp_U_x_xE5OCbW8QX4H4

Once you go VESA mounted you never go back, so worth it man. I have my TV mounted on a VESA arm for playing Halo/Xbox, and my work desk has double monitor setup is VESA mounted too and it's worth the cleaness and space saving.

Monitor weight is 16.10 LBS without stand, so anything that can hold 17+ should be fine, if you go over 20 lbs then it's really hard to normal priced arm.

1. https://www.amazon.ca/Premium-Aluminum-Adjustable-Articulating-STAND-V001Q/dp/B01LYVCEIB/ref=sr_1_18?keywords=monitor+arm&qid=1570937361&sr=8-18
   
2. https://www.amazon.ca/Monitor-Mount-Stand-Adjustable-Articulating/dp/B078455485/ref=sr_1_8?keywords=monitor+arm&qid=1570937361&smid=A1W1TYQC4XP3K1&sr=8-8
   
   ​
   
   There is few more options, but it also depends what amazon are you using. But generally monitors over 20 lbs are issues to mount or better said super expensive to mount.

> https://www.amazon.com/dp/B0052ATODM/ref=sxr_rr_xsim1?pf_rd_m=ATVPDKIKX0DER&pf_rd_p=2795440402&pd_rd_wg=dchaS&pf_rd_r=JGD230PE5K2KRP3TRPYM&pf_rd_s=desktop-rhs-carousels&pf_rd_t=301&pd_rd_i=B0052ATODM&pd_rd_w=Y0QsM&pf_rd_i=monitor+mount&pd_rd_r=4F718HJ67Q5V8AVPXJJ0&ie=UTF8&qid=1487881330&sr=1

I have these. They are excellent quality, and incredibly sturdy. The pictures don't do it justice. When you see it in person you'll understand how heavy-duty they are. I used these to hold two 27" monitors up and it was excellent. Great value for money.

I've had good luck with VIVO brand - I currently use the following:
http://www.amazon.com/Triple-Monitor-Mount-Adjustable-Screens/dp/B00B1D03GQ/

Easy to assemble, sturdy design, maximum adjustability in all directions. However, I don't know if they have a three-wide one that supports 27 inch displays - their three-wide seems to only support 24's:

http://www.amazon.com/Triple-Monitor-Mount-Adjustable-Screens/dp/B009S7ALH8/

Hi, if you don't mind me asking, where did you find that desk? I've been looking for one like it for some time.

a.) I'd suggest a quality headset stand. Massdrop has them on sale fairly regularly, although if you have Prime you can probably pick one up relatively cheaply (less than $40 US, I believe). I'm actually using my Blue Yeti as a headset stand and it works famously.

b. I'd suggest a taupe/light beige, since it would fit with the table, and leave your possibilities open if you end up getting another desk or if you want to change the room into something else. Saves you from having to re-paint at least.

c. I personally have a monitor arm that mounts to the desk. It's an Ergotron Neo-Flex, but I wouldn't really recommend it. Not a lot of articulation since it's a mechanical hinge instead of a gas hinge like this one I was looking at before I found mine in my dad's office. Almost all of them will require a Vesa mount, but those are pretty common on Asus monitors. Even my low end 22" has one. Plus it'll free up a little real-estate on your desk for a headset stand/microphone if you want one.

For smaller monitors their 17-27" model is really good, on sale for 21 right now: https://www.amazon.com/North-Bayou-Monitor-Computer-14-3lbs/dp/B01AI2YGK4/

Obviously doesn't compete with high end mounts. Maxes out at 9" over my desk with a 24" monitor, which I wish was a little higher, but it seems like most issues people have with these are with obtuse instructions. Considering it is made in china, and sold by unknown brand, I was pleasantly surprised by it's sturdiness.

This is my WIP setup. Totally open to all questions, suggestions, and criticism. Below are some additions coming.

The goal is to be this guy.




---
Things to come.
All of the below is shipping to me right now, in a week I will add them.

• Monitor mount: VIVO Triple LCD Monitor Desk Mount
  
  
• Microphone: AT2020USB+ | Aokeo AK-35 mic stand | Shock mount and pop filter
  
  
• Keyboard: Pok3r (aka WASD WP3 61-key)
  
  
• Wrist rest: Glorius wood
  
  ---
  Other things I want to purchase
  
  
  
• Large desktop mat
  
• Nice webcam
  
• audio mixer
  
• Longer desk and/or L desk. Going to go for 74"L x ~30"W for the main desk.
  
  ---
  Couple of the products you see
  
  
• Monitors: dell s2716DG & ASUS VE247H
  
• Mouse: Anker vertical mouse
  
• Keyboard: Das Keyboard V3, (model S)?
  
  ---
  Edit: Ohya forgot to mention - this is my first post here! Lurking for a long time. This community is awesome, and thanks for the inspiration!

The stand is this one: http://www.amazon.co.uk/Duronic-Spring-Monitor-Bracket-85%C2%B0Swivel-Black/dp/B00HZ0GEXU/

It holds the two 27" monitors fine, though mine are fairly heavy (even compared to many other 27" monitors) so it's pushing it - I had to tighten the imbus that holds the tilt of the monitor to the max so that the monitors would stay in place (without tilting down), but after doing that it works great. I can even extend the arms a lot, for example when I want to watch a movie from the couch I disable one of the monitors and extend the arm with the other one towards the couch. Handy stuff.

If you're willing to spend more money than that this might work too http://www.amazon.co.uk/Ergotron-Dual-Side-inch-Monitor/dp/B0036FQ23A but probably not much better than the Duronic, and costs considerably more... also will apparently allow for less arm extension.

in any case, avoid cheap monitor arms as they will perform poorly. It's not worth it trying to save on this kind of stuff. If it's below £50 you should be cautious.

Pick up one of these to get it off the carpet! PC Riser from monoprice. Otherwise great build. Glad you didnt get like a 1000+watt PSU like some people think they need with 1080 -_-;;;


Also for future small upgrades that are life changing would be sleeved PSU cables for the evga PSU. So much easier to manage for the cables.

I was suspect that they would be sturdy for this price but they really are. My screens measure about 24" across including the bezel. I think they are 22" screens??

The top screen is adjustable vertically (only a small amount) but it's still just a little bit off. Not horrible, but it's there.

Good luck duuuude!

https://www.amazon.com/gp/product/B009S7ALH8/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Definitely these - they make a large difference:

Monitor mounts - frees up a bunch of desk space and lets you tilt/rotate/move closer etc

Large mouse mat - much better than having to line up your keyboard or be restricted to a small pad

Microphone boom arm - cheap and gets the mic up off the desk freeing up space. Pair this with a pop filter and it even looks ok

Then obviously the main peripherals like audio, kb/m, monitors, desk, chair, etc

Here's the mount I use, it clamps directly on the desk. It's a really solid clamp. I was a bit nervous since I have a lot of weight on top but it seems to be holding really well, super sturdy.

If you have any questions let me know. The top two screens are 23" and the bottom is 27"

Here's another pic of the room:
https://i.imgur.com/gsreKY4.jpg

Monitors:

• Right: UW 34uc88 Curve,
  
• Middle: 24 asus vg245h,
  
• Left: Lg 27mp35vq-b,
  
  Computer Case: IN WIN Dragon Slayer MicroATX
  
  Dual arms: VIVO (STAND-V002D)
  Had these for ~4yrs now, gas assist is still going flawless!
  
  Chair: UPLIFT Pursuit Ergonomic Chair
  
  Follow ups:
  
  
• Wallmount the UW!
  
• Get my wires cleaned up,
  
• Eventually replace the left glass desk w/ a wooden one for my (recommendations?),
  
• Need greenery! Maybe an airplant or two, though I struggle keeping even those alive,
  
• Maybe a small rug for the floor,
  
  More Cat (Housemate) Tax!
  
  
  Edit: Someone’s butthurt about something.... going through comments downvoting everyone.

I'm looking for a dual monitor mount. One that is fully adjustable. I would love some recommendations especially if you own an ASUS PG279Q.

What is the difference between this $60 VIVO mount versus this $190 Amazon Basics mount?

Are there any dual mounts that you have used that you would recommend as "best in class"?

Also I will be mounting an ASUS PG279Q and a 22" LG 1080p LED. I was wondering specifically about the PG279Q's recessed VESA mount. I have tried before to mount a PG279Q on what claimed to be a 100x100 VESA mount but ended up not fitting in the recessed mounting "dock thingy". Does anyone own a PG279Q that also uses a dual mount and can confirm that the mount fits inside the recessed VESA mount of the PG279Q?

Thanks

Thoughts:

• The MSI X99S SLI Plus can 3x SLI with the cheaper i7-5820k. It uses 8x/8x/8x on the PCIe lanes. - One of the reasons the board is fantastic.
  
  
• Consider grabbing a 3rd matching monitor for Triple screen gaming. Your 3x SLI setup will have the horsepower necessary.
  
• Consider using monitors with VESA mounting points. - - http://pcpartpicker.com/part/lg-monitor-24mp55hqp
  
  You can then use desk clamps or arms to save quite a bit of physical desk space. - http://www.amazon.com/Mount--Articulating-Computer-Monitors-MI-753/dp/B00BDT072S/
  
  
  
  
• Is WiFi going to be your primary connection method? If so might want to invest the extra $10 in the AC compatible model.
  
  
• If you aren't planning to dramatically overclock your video cards, consider models with the exhausting reference cooler to help get that hot air directly out of the case instead of recirculating it among 3 cards. One card + non-exhausting cooler not a big deal, 2 cards hope you've got solid airflow. 3 cards with non-exhausting cooler, I hope it's temporary as you are planning a custom water cooling loop.
  
• http://pcpartpicker.com/part/evga-video-card-04gp41972kr
  
• http://pcpartpicker.com/part/pny-video-card-vcggtx9704xpb
  
• Or go the route of the reference GTX980's that exhaust.
  
  
  
  

Here is mine. http://www.amazon.com/Mount--Articulating-Computer-Monitors-MI-753/dp/B00BDT072S/ref=sr_1_2?s=electronics&ie=UTF8&qid=1420557500&sr=1-2&keywords=mount+it+triple+monitor. I might be able to adjust middle one down, but I haven't looked into it yet. Thanks for the kind words though! I love the triple set up.

I have had this for a little over a year and I have loved it. It lets me move them with easy and running the cables through the main tube part means I can have great cable management.

I actually just got it from an old job, and it dosent have any branding but from a quick search it looks like it could be this one on amazon. It's OK but its hard to get the monitor as close to the wall as I'd like it.

I really appreciate it, I'm going to go with something close to your build. So I talked with him today, and he said "Can we find a thinner monitor? I’d be willing to sacrifice some size for that, or increase price.?" I'm going to set him up with a three monitor stand like this one, (have to do some research on it first.)

I don't think he appreciates the IPS, although I know he'd prefer it. The one he uses now is 1600x900 Acer 20-Inch LCD,, which I probably wouldn't use in the new build. (Others in the office would love another monitor.)

I have two of these, great monitors and very nice minimal bezels. They don't have VESA mounts, but you can get an adapter that works pretty well.

Anyhow, GLWS OP!

Something like this would be awesome.

https://www.amazon.com/Mount-Monitor-Adjustable-Displays-MI-2753/dp/B06X9D7JWP/ref=pd_lpo_vtph_229_bs_t_1?_encoding=UTF8&psc=1&refRID=FC8A2B7JS81TM0NXSKJY

I have the double version and love it.

This is the monitor I currently have, and it's now VESA compatible. However, I found this adapter that claims to be able to make the monitor compatible.

So if what you're saying is true (that the monitor can be put in portrait if can Macgyver a hardware solution) then that's great news! Is there anything else I need to know or is it pretty straightforward once I have them both hooked up?

It's fantastic, set up is super easy, you can also mount it in the table too by simply drilling a 1/4" hole. There also exists gas spring ones that can let you adjust height + distance!

https://www.amazon.com/VIVO-Monitor-Adjustable-Counterbalance-STAND-V002O/dp/B01N2YFO5Z/ref=sr_1_10?ie=UTF8&qid=1520123287&sr=8-10&keywords=dual+monitor+stand

Hi, for me the simplest way to make a gaming/work station more ergonomic is to mount the screen on a ergonomic screen mount like this :
https://www.amazon.com/Mount-Monitor-Adjustable-Screens-MI-752/dp/B0052AWGLE/ref=sr_1_17?ie=UTF8&qid=1509528233&sr=8-17&keywords=ergonomic+screen+mount

And just doing simple cable management would make this really more enjoyable with something like https://www.amazon.com/Kootek-Management-Concealer-Organizer-Reversible/dp/B01GCS77TU/ref=sr_1_1?s=office-products&ie=UTF8&qid=1509528498&sr=1-1&keywords=cable+management

or this https://www.amazon.com/YOCOU-3-Channel-Management-Organizer-Solution/dp/B01KUG90F4/ref=sr_1_12?s=office-products&ie=UTF8&qid=1509528498&sr=1-12&keywords=cable+management

I hope that could help you

Throwing [this one] (http://www.amazon.com/gp/product/B0052AWGLE/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1) in the mix to consider. I would imagine they are very similar, but I use the one here with two of this monitor and it is fantastic. I'm not sure if the one you linked has the cable management through the post, with an exit hole right above desk level. If so, they are basically the same. If not, I suggest the Mount-It one as it is fantastic. If you have any questions or want some pics, just let me know.

You can get a stationery monitor mount, which allows you to pull the screen closer, tilt, and rotate, but doesn't allow individual height adjustment for each monitor such as this.


Or you can get three individual mounts, which allow full mobility (up, down, closer, farther, & rotate) such as this.

There's double/triple versions of these as well. Double. Or Triple.

Good brands include: Ergotron, Ergrotech, VIVO, & Amazon's version. Mount-It and Cable Matters both make some as well, but I haven't used these ever.

I'm really happy with the monitor arm. It can be mounted with either a clamp or bolted with a thru hole, which is how I did it. It has an excellent range of motion, easy to instal, and has a channel for running cables.

https://www.amazon.com/dp/B01AI2YGK4/ref=cm_sw_r_cp_apa_jBb6yb6KXAXDP

I absolutely love the mount, it works great for me because I don't need to drill any holes into my wall because I can just attach to my desk. The mount I have is a Mount-It! Articulating Single Arm.

Here's the link to it on Amazon:

http://www.amazon.com/gp/product/B0052ATODM/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Pretty sure this is the culprit right here: https://www.amazon.com/gp/product/B00B1D03GQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Thanks for the kind words :)

if you talking about for my legs under the desk, then yes i would agree, i usually end up resting my feet on my subwoofer, i may just get rid of the PC that's under there since i only use it maybe once or twice every 3 months.

For the mounts i use a VIVO Triple monitor mount they works pretty well for my 2x 27" monitors and would recommend it. The worst part was putting it together, granted i never have put anything like that together before.

Thanks, I am pretty proud of it thus far.

for my main monitor, I purchased one of these
https://www.amazon.ca/gp/product/B0052ATODM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

I did however not pay that price, I payed half of that.

The other one that can move up and down and around
https://www.amazon.ca/DURAMEX-Professional-Monitor-Adjustable-SHIPPING/dp/B00MESCVEY/ref=pd_sim_sbs_107_18?_encoding=UTF8&psc=1&refRID=9APD2E2CVA15R8WCYS42

for your need would this work?

https://www.amazon.ca/Triple-Monitor-Adjustable-Screens-VIVO/dp/B009S7ALH8/ref=sr_1_1?s=office&ie=UTF8&qid=1480268872&sr=1-1&keywords=3+monitor+mount

This is the stand I am currently using, It works great for me and the center mast is hollow with holes in it to run cables through so cable management is pretty easy.

This looks to be the older model. I bought this version a week ago. Works great, Pretty easy to setup.

Thanks! Yeah the different size monitors are far from ideal for multi monitor gaming, but it's not so bad. What I do is set the game to windowed mode, then stretch the window to the dimensions of my screen. Due to my center screen being taller in resolution than my outer monitors, some stuff gets cut off the top and bottom on the side monitors. It's not really an issue, but some games do have their huds on the top and bottom corners. So you have to watch out for that. Running a setup like this though you can not setup EyeFinity or nVidia Surround as the differing resolutions mess it up. But Live for Speed and all Codemasters racing games support the windowed method I've listed. Any other game I just run single screen.

My stand is a VIVO Triple Monitor Stand (http://www.amazon.com/gp/product/B009S7ALH8). If you're looking into doing a triple monitor setup, I would not suggest this stand. I've had my share of problems with it and I can not get my side monitors to sit height centered with my main (so alignments are a bit off in games). Good triple stands are expensive. Once the summer rolls around I'm going to build my own mount to solve my problems.

Dell U2414h has a gorgeous panel, I found it for $230 on amazon, and you most probably can fit 2 of those into your budget, and lower it by a lot by buying used (there a tons of those on the used market). For the mount, I personally use this one, it's really cheap in the US and the quality is amazing.

I’ve toyed with the idea of going for an S4. Currently got an A4 at the moment.
I had hopes for the new Asus monitors or virtual link being able to power an older usb-c like the AOC 16ifux(?) an APU build might work these days, I think I saw someone saying they got decent frames out of one recently. That and TB3 on an X570 board.

Personally I’m on the lookout for a portable non-portable monitor that’s readily available in the UK with a vesa mount.

https://youtu.be/-WABu-1VIjE
One thing missing from that packing is the stand.

Something like this would be good as it looks like it’ll break down to be flat & allows for adjustability.
https://www.amazon.com/VIVO-Computer-Free-Standing-Adjustable-STAND-V001H/dp/B01FE2BCR8

I've loved this Vivo triple monitor mount. Iirc it supports up to 27" monitors, and once you adjust & tighten the arms it's fantastic.

I'm using one with a similar design to this one, and I'm very much satisfied. It says it supports up to 24", but if I'm not wrong, those are some dell 25" with tiny bezels to fit well below the 24" max size.

Another one, which looks even more promising

Asus MX series user reporting in :D

Love my three MX279H monitors. They look even better when on Vesa arms using a custom bracket.

_____
EDIT: For anyone with an MX series monitor and would like to know how I VESA mounted them, here is what I used:

Adapter

Vesa Arm I used

What do you mean sag? Looks like both links point to the same mount, just that one isn't clamped to the desk.

I know it's likely not quite what you're looking for, but I have two of these which each hold an Asus PB279Q perfectly, I can move them to any position I want and it stays rock solid.

https://www.amazon.com/VIVO-Monitor-Adjustable-Screens-STAND-V003/dp/B009S7ALH8

This is the one I use and it does a pretty good job. The only thing is it's super heavy so I would get a desk that can support it and sadly the ikea linnmon can't just by itself

I have the Ergotech and I love it.

Very stable, easy to adjust, and the quick release clips for the two side monitors is very handy for when I need to pack the stand up and transport it.

Go for it, you will love it!

They are both IPS displays and coincidentally they both use the same 23" LG IPS panel. So... beyond a few case differences (The Eizo lacks tilt, swivel and height adjustment) and some calibration they will both wind up looking exactly the same. Whatever monitor you prefer and who offers the better price will be the ultimate factor. You should be able to score the 23"" Dells for around $230/ea

I debezeled my panels (http://www.wsgf.org/forum/forums/hardware-software-support/hardware-discussions/18530/bezel-less-diy-also-valuable-users) so that they would look a lot nicer than stock. I even recently put them on a Triple monitor stand from Ergotech (http://www.amazon.com/Ergotech-Triple-Horizontal-Monitor-100-D16-B03/dp/B001NPEC5A/ref=sr_1_1?ie=UTF8&qid=1341967480&sr=8-1&keywords=ergotech+triple+monitor+stand) and it looks a lot more clean now.

Feel free to check out my videos too. I even have some Guild Wars 2 footage (http://www.youtube.com/my_videos?feature=nanahara72)

Once you have Eyefinity, you will never go back. Some of the older games require 5-20minutes worth of work but the experience is worth it.

Yeah, I'm pretty sure I'm interested in that for $20. My big-ass TV is sitting on this rn

Think I could buff out some of those scratches with a polisher or sander? Can you tell if it's veneer or paint?

This one seems pretty reliable. I don't know however, as I've only stuck with one monitor, but from the reviews it seems pretty good.

I have this one.
I use to to keep my PC off the carpeted floor though. I don't know if glass goes with the look you're after, but it's pretty strong.

Not sure you'll get that, but good luck.

That stand is way overpriced, the ergotron is only 200 on amazon. Or just get 3 seperate stands from monoprice.

http://www.amazon.com/-Triple-Horizontal-Monitor-100-D16-B03/dp/B001NPEC5A

I figure 500 is more realistic.

Here's my input along with links to products.

1. Put the bed on risers to add storage space.
   
2. Make a headboard for your bed. If you're handy, this can be done cheaply. If you're not handy, you can buy one for a reasonable price.
   
3. Can the dresser and the desk be swapped? If so, put the desk next to the bed so that you don't wake up to a wall to your right and so you can look out the window while working at your desk. The desk can also serve as a bedside table.
   
4. Mount the monitors on the wall to free up desk space. Here are a couple options - two singles and a double.
   
5. Re-do the shelves. They have a very garage feel. Some cheap board from the hardware store to even out the sides would make a real difference.
   
6. Put at least a picture above the bed on the side that's to your left while sleeping. It should be longer than it is tall. Scenery is good. I have this in my bedroom and I like the effect.
   
7. Mount the guitar on the wall.

Looks like one of the flavors of this stand: https://www.amazon.com/VIVO-Monitor-Adjustable-Screens-STAND-V003T/dp/B00B1D03GQ/ref=sr_1_19?ie=UTF8&qid=1539739704&sr=8-19&keywords=2%2B1+monitor+clamp+stand

Just has the single monitor mount on bottom with the dual arm up top.

Boom arm for the mic is mounted is either mounted to the wall, a hole is drilled out of the top plastic cap on the mount's pole and sits in there, or the clamp can mount to the pole with the plastic cap removed or to the pole itself. My money is more on a drilled hole in the plastic or one of those boom arm mounts that require drilling into a desk that perfectly fits in the tube.

I just commented on someone else's post about this as well, but if you want a little stand that will allow you to move your desktop to the floor, allowing for more desk space, here is what i use. It's meant for monitors but works perfectly for a tower.

I like the full native w/o scaling, so... yeah. I need all the lines of text I can get :)

If you put the monitor on a $35 free-moving arm you can freely adjust the distance, orientation, etc.

Very nice! Now all you need is 2 more for surround! And this helps a lot! :)

I've never had a setup like this but I'd imagine you could combine or buy a dual monitor arm with a single monitor mount also attached to it and tilt as needed then retighten the bracket.

Something like this might work. Make sure it will support the measurements and weight of your monitors though.

Ergotech makes some great stands I think would work for you. They aren't clamp style so they take up a bit more space, but you only have 1 base on your desk instead of multiple.

They have a regular 2 monitor stand here:

https://www.amazon.com/Ergotech-Horizontal-Monitor-Stand-100-D16-B02/dp/B001NPEC50/

They also have a triple monitor stand that I would probably recommend above it. You can still only mount 2 monitors if you want. Just move the mounts further towards the joint on the wings to accommodate your monitor size. The real reason I recommend it though is the base is completely flat, so even though it takes up some desk space, that space is still relatively usable because it is just a flat piece of sheet metal.

https://www.amazon.com/Ergotech-Triple-Horizontal-Monitor-100-D16-B03/dp/B001NPEC5A/

This one. It's pretty easy to work with. If you want to get it exact you'd need a level and a ruler and take some time. I didn't have the time nor did i care enough to get it absolutly perfect

Bought this a couple weeks ago - looks great with my setup. Listed as unavailable right now for some reason.

Monitor Stand for Desktop, Black - Aeon 60123 https://www.amazon.com/dp/B01B6QAT66/ref=cm_sw_r_cp_apa_.hx7yb7BD40C6

I have also used this Monoprice variant in the past. Works just as well as the one above, friend just needed one and I switched to match my desk/build.

Monoprice Multi Media Desktop Stand 22" x 9.5" (109434) https://www.amazon.com/dp/B00AJHCQD8/ref=cm_sw_r_cp_apa_Rux7yb8DZ5E2P

Amazing job! I really like the mounts. However, I can get this one for less than $60. It would take me months to build one.

Are you in metalwork, or is this just a hobby?

Also, how do you convince your wife to let you buy tons of tools?

http://www.amazon.com/gp/product/B006JG9RQ2/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 thats what I bought but the bottom stand on the current version is different looking...
all that aside its awesome really heavy and sturdy. I have the top monitor mounted in the tube on the stand, I just pulled off that silver thing on the bottom and put it right in no bolts or anything its supported on its own weight. http://www.amazon.com/gp/product/B00689HXI4/ref=oh_aui_detailpage_o00_s02?ie=UTF8&psc=1

Dual monitor arm! Here's the one I have:
http://www.amazon.com/Mount--MI-752-Adjustable-Desktop-Monitors/dp/B0052AWGLE/ref=sr_1_1?ie=UTF8&qid=1453602291&sr=8-1&keywords=Mount+it+dual+monitor+arm

This is one of the more cheaper options. You have pretty good options on how you can mount it, and they're fairly solid in terms of build quality.

Just make sure your monitors are VESA compatible.

If you're starved on desk space with your multiple-monitor setup, it's definitely worth it.

Looks great! May I recommend a monitor mount for your desk, it should get you some prime real estate back.


Mount-It! MI-753 Triple Screen LCD Computer Monitor Desk Mount Stand Arm for 19, 20, 22, 23, 24 Inch Monitors VESA 75 and 100 Compatible Full Motion, Tilt, Swivel, Rotate, 66 lbs Capacity, Black https://www.amazon.com/dp/B00BDT072S/

They have versions for larger monitors as well if that's the case.

I bought one of these off of Amazon to keep my tower off the carpet. It looks nice and fits my case just right. It's made of glass so it will match your case even better. I recommend picking one up.

https://www.amazon.com/gp/product/B00AJHCQD8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Of course! Those are BenQ RL2755HM mounted on this awesome dual arm stand

In retrospect I wish I had settled for 25" monitors with higher refresh rates and gsync. They would be more flexible in that setup and 27"x2 is just overkill.

This is the model I have: http://www.amazon.com/dp/B007BD0MPM/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=80LM7GGF1K5O&coliid=I9IZ2AGCIVVSX

It's great, will hold up to 27" screens and the outside arms tilt in as well as the mounts the actual monitors are on so there is plenty of angle. You can also turn them to portrait view if you would like.

Also the little knobs on top of the outside monitor mounts will move the outside screens up or down independently of the other screen so you can adjust as needed.

Ikea sells poles that can be friction fit to the ceiling. Find a monitor mount you can MacGyver to it and you're all set. The older poles (Stolmen) they used to sell were cylindrical and a basic monitor mount from Amazon fit it nearly perfectly. All that was required was to insert the plastic inserts that came with the anchors that were used to attach shelving and such.. I think the new ikea poles ones are square shaped... You could always buy a stripper pole to make it work or find an old Ikea Stolman pole on craigslist.

You can also use two poles for much larger screens. Even the new system would work with this method.

I agree. They'll probably buy the absolute best monitor mount you can get. Something like this:
https://www.amazon.com/dp/B00689HXI4/
Which is $200

If the table is sturdy you can get one of these http://www.amazon.com/gp/product/B0052AWGLE?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 and some of this velcro http://www.amazon.com/gp/product/B00006IC2U?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s01

I have it hanging down from the front of my desk and it's very sturdy. The velcro is also extremely secure, I can rotate the sticks so they're hanging upside down and they can stay like that for days without losing grip. Only downside is that the pole sticks out 18 inches from what it's secured to, and the fasteners stick up 5-6 inches from the surface.

Looks like this http://imgur.com/a/QLoXe

I wanted to go with one of those, but I currently have a glass desk and didn't think those would mix well. If you ever look for a tri stand, there are basically two that can handle 3 24"s: a reasonably priced one, and a really expensive one. I got the former and have been very happy with it.

Depends on what type you want, and what your space affords. The straight metal bar style usually runs cheapest and keeps the monitors closest to level, but takes up a ton of space.

I have this Vivo triple monitor mount and it's worked out nicely. It doesn't keep the monitors exactly in line (I have 2x24" on the sides and a 23" in the center), but close enough for my liking.

Here's the link. Its super thick glass, works great for keeping the desktop away from the dusty carpet.

http://www.amazon.com/gp/product/B001NPEC5A/ref=oh_o01_s00_i00_details
I got this one. Pricey, but very nice and sturdy. Much nicer than having the three monitors sitting directly on the desk since I can raise them much higher

I own this one and love it. My two monitors are very different in size (20.1 vs 27) and have zero issues. Looks perfect.

Yep it's this one: https://www.amazon.ca/Mount-Monitor-Adjustable-Displays-MI-2753/dp/B06X9D7JWP/ref=sr_1_2?keywords=mount+it&qid=1565309852&s=office&sr=1-2

A little weird to set up but I like it. Really good for my 27"s

I really like the lightpack. It works really well for everyday use. I just wish it worked more in games.

The arm is a Mount-It desk arm I got on amazon. Link!

Funny enough, one of the cheaper ones on Amazon. But I love it.

https://www.amazon.com/gp/product/B009S7ALH8/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

Maybe it was [this one?](http://www.Mount-It.com/! Dual LCD Monitor Desk Mount Stand Heavy Duty Fully Adjustable Arms Fits 2 / Two Screens up to 27", VESA 75 and 100 (MI-752) https://www.amazon.com/dp/B0052AWGLE/ref=cm_sw_r_cp_apa_EY9Vzb22HQTSF) I can't tell if you're using a dual arm mount like that one, or two single mounts, like [this.](http://www.Mount-It.com/! Monitor Arm Single LCD Monitor Desk Mount Stand Fully Adjustable Fits 20 21 23 24 27 30 32 Screens Height Adjustable Tilt Swivel Rotate, Clamp Base (MI-751) https://www.amazon.com/dp/B0052ATODM/ref=cm_sw_r_cp_apa_D49Vzb29STD0B)

Do let me know if you can, I'm looking to do this exact same setup with an ultrawide center and regular monitor in portrait beside it. Thanks!

Well, if that's the case, and this may interest you as well, why not use a triple monitor arm? Like this one from Ergotech as long as your monitors have a vesa mount (most modern monitors do.)

I use the Ergotech Freedom Arm for my 34" Ultrawide and it's very solidly built so the company makes quality products. However, if price is a big factor there are other companies out there that make similar items for cheaper with varying quality.

The North Bayou mount that was posted here awhile ago is incredibly stable for the price.

It's out of stock on amazon, http://www.amazon.com/gp/product/B01AI2YGK4?psc=1&redirect=true&ref_=oh_aui_search_detailpage

But you can still get it on Ebay

http://www.ebay.com/itm/North-Bayou-Universal-Full-Motion-Articulating-Gas-Spring-Arm-Desk-Mount-F80-/281912513271?hash=item41a34b92f7:g:~mAAAOSwLnlWm0gn

Not sure how they sell for so cheap, it's really good.

Holds my vg248qe and the s2340m easily.


So much more room on my tiny ikea micke desk now :D https://dl.dropboxusercontent.com/u/46294175/Setup/WP_20160228_00_24_34_Pro__smallres.jpg

I agree 100%. I grabbed a Mount-It! triple monitor mount from Amazon and it was the best move I made.

Oh yeah, the view is pretty much my favorite part! The stand is from North Bayou, here:
https://www.amazon.ca/NB-North-Bayou-Monitor-Computer/dp/B01EHQL3LW/ref=sr_1_1?ie=UTF8&qid=1550064980&sr=8-1&keywords=dual+monitor+bayou

Do you have any experience with the Gerton when it comes to desk-mounted monitor arms (or just how sturdy it is in general)? I currently have a 3-monitor mount but the base of it is huge so I figured I would get a desk-mount system for when I buy a new desk yet I am unsure if the desk can support it. It is one of the reasons I am so hesitant to go with the Linnmom/Karlby.

(Something like this: https://smile.amazon.com/Mount-MI-753-Computer-Monitors-Compatible/dp/B00BDT072S?sa-no-redirect=1)

Y'all need vesa mounts. They free up a ton of space on your desk, provide the best view adjustments, and really aren't that much money or work.

Just the $30 amazon special. I've had it almost two years now and it still works great.

Amazon link

Have this monitor and love it! I bought this mount as the stock one is kinda crap. I will be buying 2 more of these as 144hz is best hz

I bought this one a little over a year ago, and I love it. It's a little bulky, but that's because of the cable-management. Bonus of being half the price of the cheaper one you listed.

I have a movable stand from Ergotron
Ergotron LX Desk Mount

Its awesome, very sturdy, and allows me to swing that monitor around without much trouble.


This amazon basics appears very similar, is cheaper and has great reviews: AmazonBasics Single Monitor Display Mounting Arm



I also have one of these for a monitor I dont need to move about:
Mount-It! MI-751 Single LCD Monitor Desk Mount

Cheap, sturdy, I have no complaints and would buy another if and when I end up with a 3rd monitor.

Here are the monitors I'm using, nothing special really but I love them. And this is the mount.

I use this stand for my PC. Come in black/clear glass and metal. All different sizes. Good price.

Edit: Looks like OP has this exact type of stand for his monitor. Didn't notice. One for the PC would match nicely.

It's this one: https://www.amazon.com/North-Bayou-Monitor-Computer-14-3lbs/dp/B01AI2YGK4

Amazon sells an Amazon Basic stand to convert monitor mounts into laptop sends, so I got that as well.

Works fine. Typing on it right now while loading into IB. :)

So this thing is pretty freaking good. It does have important drawbacks tho. 1) it is VERY stable (they offer it for a 24in monitor and 27 in monitor version) 2) THe base is quite large, so if you dont have the desk realestate, consider other options. 3) I have 3 24in monitors that hang off to the very edge so one way or another, I reccomend getting the 27 in version (if you have the space). Here it is: https://www.amazon.com/Ergotech-Triple-Horizontal-Monitor-100-D16-B03/dp/B001NPEC5A

1. http://www.amazon.com/Ergotech-Triple-Horizontal-Monitor-100-D16-B03/dp/B001NPEC5A/ref=pd_sbs_op_6
   
   Performs great, had to make my own base though because the stock one was too big. Yes stable
   
   
2. Haven't really tried playing games that don't support it yet.
   
   
3. Never used the 6950 so I can't say. But the 7950 is a monster considering its pumping blood at 5760x1080

I bought this Ergotron mount a little while ago and even through it's far from the cheapest, the thing is insanely well built and can EASILY hold both of my 27" monitors. If you can afford it or it goes on a good sale I would jump on their stuff.

Im looking to use a triple monitor setup of a 27 in monitor in the middle, and two 4:3 17in monitors on the sides. Im trying to find a triple monitor mount, and ive found this two:

1- https://www.amazon.ca/Articulating-Triple-Monitor-Mount-Swivel/dp/B005HYDG00/ref=sr_1_1?ie=UTF8&qid=1462299089&sr=8-1&keywords=triple+monitor+mount

2- https://www.amazon.ca/Triple-Monitor-Adjustable-Screens-VIVO/dp/B009S7ALH8/ref=sr_1_3?ie=UTF8&qid=1462299102&sr=8-3&keywords=triple+monitor+mount

The SIIG mount would definitely fit my setup, but it ends up being $70 more, so im wondering if the VIVO one would be able to manage with my setup.

The monitors im using are a Dell S2740L and two HP vs17's.

Thanks guys!

I personally prefer 2 single arms since there's more freedom of movement and it's less stress on the mounting point.
This deal seems awesome https://www.amazon.ca/NB-North-Bayou-Monitor-Computer/dp/B01FRWONKI/ref=sr_1_1?m=A2V6O7OTRZHL3U&s=merchant-items&ie=UTF8&qid=1527767437&sr=1-1

Haha yea IKEA desks FTW! As for the monitor stand I am using the ergotron monitor arm - http://www.amazon.co.uk/Ergotron-Long-Pole-Mount-Screen/dp/B00689HXI4/ref=sr_1_4?ie=UTF8&qid=1409520178&sr=8-4&keywords=ergotron

I have one of these: http://www.amazon.com/gp/product/B007BD0MPM

It claims it supports 3 x 27" monitors. I have 3 x 24" on it and I could believe it - there's still a lot of room to move them out despite me having them mounted in a line without too much inward tilt on the monitors.

It's not cheap and it weighs a shitton when fully loaded. I can't remember whether it comes with a wall mount in the box, so you'd need to verify that. It'd need to be a sturdy wall too.

I think you're pretty much out of luck trying to find one bracket that'll do 3 x 30", they're not only ridiculously heavy but also huge width-wise.

I got this clear glass monitor stand from Monoprice: https://www.amazon.com/gp/product/B00AJHCQD8/

It's got plenty of weight rating for a tower and the 22"x9.5" is perfect for my S340. But you can see they have plenty of bigger sizes.

And trust me, I've looked. There really isn't a whole lot else for this purpose unfortunately.

I would like to randomly plug this thing.


I have carpeted floor in my room so I didn't want my tower directly on the floor. This thing works perfectly in terms of dimension for a full sized tower. It also matches my silver and glass desk!

https://www.amazon.com/dp/B00689HXI4/ref=cm_sw_r_cp_api_gG1lybR93BMW

Here is the one I use, it's desk mount but it's definitely strong enough for the weight of the monitor. A lot of arm mounts aren't strong enough to handle the weight but I think this one is rated for up to 20 lbs.

Edit: just saw that they also have a wall mounted version of the same arm

https://www.amazon.com/dp/B00358RFJ8/ref=cm_sw_r_cp_api_CW1lyb3S3G7G4

Looks like a good option. I'm wondering if this is available somewhere in EU however since shipping to UK is $170!

Would this be it ? https://www.amazon.co.uk/Ergotech-Triple-Stand-Telescoping-Monitor/dp/B007BD0MPM or is there something special with the WSGF version

Edit : It's not. Looks like the WSGF version has a 5th pivot which is what will enable me to angle my 24" at 35/40 degrees

This is the one I use. It's pretty solid. LTT did a review on it if you are interested.

Right now I have a rig that has a wheel stand, pedals platform, and seat, but no monitor mount. I have my rig on wheels that I can slide right up to my desk(I play non racing games and work so I don’t use my racing seat for that). My desk is rectangle but I made the front edge curved so I can slide my rig closer to the middle monitor, as they use the attached stand that sits on a desk.

Once I get a better desk, I’m going to get a triple monitor mount though, like this one. https://www.amazon.com/dp/B00BDT072S/ref=cm_sw_r_cp_api_i_

If you get a rig with mounts just make sure the monitor stand part has adjustability to come closer/farther from you without moving your distance to your wheel. A lot are locked to a fixed distance from the wheel, and all you can do is keep moving your seat closer to the wheel(and screens) but you can only get so close to the wheel before that doesn’t work anymore.

Do you want a wall mount or desk mount? I usually go with desk mounts.

I personally like gas spring monitor mounts a lot because they offer a high degree of adjustments. You can pivot, tilt, swivel, and height adjust by just moving the monitor around with your hands.

It feels like the monitor is floating in the air almost.

https://www.amazon.com/VIVO-Monitor-Deluxe-Screens-STAND-V002D/dp/B00M4D395O/

Some people don't like/want to adjust their monitors. They prefer a fixed mount like one of these:

https://www.amazon.com/dp/B00FQSAWDQ/

Bro try a desk mount. Super easy to mount a montor arm to your desk vs a TV stand in your wall like this