Reddit mentions: The best parallel adapters
We found 5 Reddit comments discussing the best parallel adapters. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 4 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. CNCdrive UC100 USB to Parallel CNC Motion Controller
- Replaces the standard parallel port interface.
- Operate a CNC machine over a USB connection
- Works seamlessly with Mach3 Software (sold separately).
- Pulses at rates up to 100 kHz.
Features:
Specs:
Height | 0.5 Inches |
Length | 2 Inches |
Number of items | 1 |
Weight | 0.125 Pounds |
Width | 2 Inches |
2. StarTech.com USB to Serial Adapter - 1 Port - COM Port Retention - Texas Instruments TIUSB3410 - USB to RS232 Adapter Cable (ICUSB2321X),Black
- Add one serial RS-232 port with com retention to any laptop or computer with a USB port
- USB to Serial
- USB to RS232
- USB to DB9
- USB to Serial Adapter
- Simple installation and operation with COM port retention provides robust serial connectivity for legacy devices with minimal hassle
- Easy plug and play installation with USB Powered device - no power outlet required
- Extensive list of compatible operating systems makes this device perfect for almost any RS232 application
- USB to Straight-Through RS232 Serial Adapter
- COM Port assignments maintained across reboot
- Single cable design for portability
- Baud Rate up to 230 Kbps
- Powered by an available USB port - no external power adapter required
Features:
Specs:
Color | Black |
Height | 0.5 Inches |
Length | 16.5 Inches |
Number of items | 1 |
Release date | November 2020 |
Weight | 0.0661386786 Pounds |
Width | 1.4 Inches |
3. Starnill Centronics Cen36 Female to Mini-centronics Hpcen36 Male Ieee1284 Parallel Printer Adapter
Centronics To Mini Centronics AdapterAdapt your parallel cable to fit the smaller 36-pin Mini-Centronics port with this adapter.Connector 1: 36-pin Centronics (type B) femaleConnector 2: 36-pin Mini-Centronics (type C, MDR36) male
4. Scs232 Serial Adapter RJ45f to Db9f
- Product Type :Computer Component
- Package Dimensions :1.5 Cm L X6.7 Cm W X7.5 Cm H
- Country Of Origin :China
- Package Weight :1.0Lbs
Features:
Specs:
Height | 1 Inches |
Length | 1 Inches |
Number of items | 1 |
Weight | 0.04 Pounds |
Width | 1 Inches |
🎓 Reddit experts on parallel adapters
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where parallel adapters are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I've used 3 or so different pci and pcie parallel Port cards and they never seem to work with Mach 3. Not sure why but I've never had any success. I've had good success with this adapter though :
https://www.amazon.com/CNCdrive-UC100-Parallel-Motion-Controller/dp/B00TPBGXII
There's this product from Startech. It actually worked very well for me, and yes, it does retain the same com port.
I recommend the UC100 for applications such as this: https://www.amazon.com/dp/B00TPBGXII/
Don't need to look it up, I also had one with a Centronics interface as well at one point. What you need to do is pick up an adapter to convert it to a standard parallel port. From there there's any number of network print servers designed to make parallel port printers available on your home network.
I don't think there is a direct cable, since you need a serial to USB converter. (It's not a miniUSB on the switch, it's RS232, just with miniUSB connector). I belive Brocade will ship USB-C to USB cables with ICX7150 series though.
So basically you need USB to RS-232 http://www.aten.com/global/en/products/mobility-&-usb/usb-converters/uc232a/
Then DBF9 to RJ45 https://www.amazon.com/Scs232-Serial-Adapter-RJ45f-Db9f/dp/B000067VFY
To which you can plug yout RJ45 to miniUSB cable
#donglelife