Reddit mentions: The best power conditioners
We found 77 Reddit comments discussing the best power conditioners. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 20 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Furman M-8X2 Merit Series 8 Outlet Power Conditioner and Surge Protector
- AC noise filtering reduces RFI/EMI, Spike & surge protection ensures equipment stays safe & power stays clean,
- 15 amp rating with circuit breaker and "Protection OK" Front Panel Indicator to let you know that your equipment is being protected
- 9 Total outlets: 8 rear panel outlets (including 3 with "wall wart" spacing) and 1 front panel convenience outlet
- Filtration rating greater than 23 dB, 200 Khz to 10 Mhz, perfect for instrument rigs, home recording, DJ equipment, pro audio rigs and home entertainment systems
- Furman's AC noise filtering reduces RFI and EMI interference to deliver a cleaner sound without pops, crackles and the local radio station coming out of your amp
Features:
Specs:
Color | Black |
Height | 1.8 Inches |
Length | 3.8 Inches |
Number of items | 1 |
Release date | August 2018 |
Weight | 4.6 Pounds |
Width | 19 Inches |
2. Eliminator Stage Light Accessory, Original Version (E107)
ON AND OFF POWER CONTROL CENTER: When a power switch is glowing, the power outlet on the rear of the unit that matches the switch will be active.RELIABLE RACK MOUNT POWER CENTER: The e-107 weighs for 4 lbs. with dimensions of 2”(H) x 6”(W) x 21”(D) and a supply voltage of 120V.8 ON AND OFF SW...
Specs:
Color | Original Version |
Height | 2 Inches |
Length | 21 Inches |
Number of items | 1 |
Width | 6 Inches |
3. Furman Power Conditioner (M8DX)
Digital Voltmeter Displays Incoming Line VoltageAC Noise Filtering Reduces Radio Frequency (Rfi) & Electromagnetic Interference (Emi)Spike & Surge Protection Ensures Equipment Stays Safe & Power Stays Clean8 Rear-Panel Outlets & 1 Front-Panel Outlet
Specs:
Color | Black |
Height | 1.75 Inches |
Length | 19 Inches |
Number of items | 1 |
Release date | August 2009 |
Weight | 7.054792384 Pounds |
Width | 7.5 Inches |
4. Ebtech Hum Eliminator
Uses 1:1 isolation transformers to break loop antenna and balance audio linesAlso converts balanced and unbalanced signals and cable types1/4" smart jacks can accept any combination of mono or stereo plugsPassive device (No power required)Cold-rolled steel housing. Two Year warranty.
Specs:
Color | Black |
Height | 2.25 Inches |
Length | 3 Inches |
Number of items | 1 |
Release date | July 2008 |
Size | Hand Held |
Weight | 0.5 Pounds |
Width | 1.25 Inches |
5. MXR MC403 Power System
Powers more types of pedals and electronics at one time than any previous power supply unit availableCan be used on pedal boards or rack mountedHigh quality, high performance toroidal transformers ensure quiet operation with superior performance capabilitiesEnclosed in a heavy-duty housing, the MC40...
Specs:
Color | Black |
Height | 2.7 Inches |
Length | 5.5 Inches |
Number of items | 1 |
Weight | 1.75 Pounds |
Width | 4.4 Inches |
6. Furman Power Conditioner (PST-8)
- Advanced Linear Filtering dramatically reduces AC line noise and contamination resulting in improved audio/video clarity
- Series Multi-Stage Protection Plus (SMP+) for the highest level of AC surge suppression; Automatic extreme voltage shutdown guards your valuable equipment from dangerous wiring faults
- Zero ground contamination circuitry assures the delivery of pure AC power thus protecting critical audio/video components
- Cable satellite and Telco connectors deliver advanced protection to connected equipment
- From the #1 brand in professional power conditioning. Perfect for instrument rigs, home recording, DJ equipment, pro audio rigs and home entertainment systems
- Advanced Linear Filtering dramatically reduces AC line noise and contamination resulting in improved audio/video clarity
- Series Multi-Stage Protection Plus (SMP+) for the highest level of AC surge suppression
- Automatic extreme voltage shutdown guards your valuable equipment from dangerous wiring faults
- Zero ground contamination circuitry assures the delivery of pure AC power thus protecting critical audio/video components
- Cable satellite and Telco connectors deliver advanced protection to connected equipment
Features:
Specs:
Color | Silver |
Height | 2.75 Inches |
Length | 17.75 Inches |
Number of items | 1 |
Release date | August 2009 |
Width | 3.75 Inches |
7. Furman PL-8C 15 Amp, Advanced Level Power Conditioning, SMP, EVS, LiFT, 9 Outlets, Pullout LED Lights, Isolated Outlet Banks
9 Outlets total outlets with Dual Retractable LED LightsFurman's exclusive SMP technology provides the highest level of surge & spike protection available.Isolated outlet banks minimize inter-component interference and noise contamination.15 Amp rating featuring a high inrush magnetic circuit breake...
Specs:
Color | Black |
Height | 1.75 Inches |
Length | 10.5 Inches |
Number of items | 1 |
Release date | August 2009 |
Weight | 11.8 Pounds |
Width | 19 Inches |
8. Furman M-8Lx Standard Level Power Conditioning, 15 Amp, 9 Outlets with Wall Wart Spacing, Pullout Lights
2 Retractable incandescent Front-Panel Light Fixtures With Dimmer Control For Convenient Rack IlluminationAc Noise Filtering Reduces Radio Frequency (RFI) & Electromagnetic Interference (EMI)Spike & Surge Protection Ensures Equipment Stays Safe & Power Stays Clean8 Rear-Panel Outlets & 1 Front-Panel...
Specs:
Color | Black |
Height | 7.5 Inches |
Length | 1.8 Inches |
Number of items | 1 |
Release date | August 2009 |
Weight | 7 Pounds |
Width | 19 Inches |
9. Furman PL-PLUS C 15 Amp Power Conditioner
- Furman's exclusive SMP technology provides the highest level of surge & spike protection available.
- Isolated outlet banks minimize inter-component interference and noise contamination.
- Segmented LED voltmeter monitors and displays incoming line voltage.
- Advanced Level Power Conditioning, SMP, EVS, LiFT, 9 Outlets, LED Voltmeter, Pullout LED Lights, Isolated Outlet Banks
- From any outlet to your component
- Built in surge and spike protection
- Keep your equipment in top condition
- Reduces cross component interference
Features:
Specs:
Color | Black |
Height | 1.8 Inches |
Length | 3.8 Inches |
Number of items | 1 |
Release date | August 2009 |
Weight | 11.904962148 Pounds |
Width | 19 Inches |
10. Furman Power Conditioner, White (PST-8D)
- Advanced Linear Filtering dramatically reduces AC line noise and contamination resulting in improved audio/video clarity
- Series Multi-Stage Protection Plus (SMP+) for the highest level of AC surge suppression; Automatic extreme voltage shutdown guards your valuable equipment from dangerous wiring faults
- Zero ground contamination circuitry assures the delivery of pure AC power thus protecting critical audio/video components
- Cable satellite and Telco connectors deliver advanced protection to connected equipment
- From the #1 brand in professional power conditioning. Perfect for instrument rigs, home recording, DJ equipment, pro audio rigs and home entertainment systems
Features:
Specs:
Color | White |
Height | 4 Inches |
Length | 23.75 Inches |
Number of items | 1 |
Release date | August 2009 |
Weight | 5 Pounds |
Width | 8.25 Inches |
11. Nady PCL-810 Power Conditioner, 1800W, 15 Amp, 8 Outlets with Wall Wart Spacing, Pullout Lights, and Surge Protector
Power conditioner, perfect for your rack system, with rugged single rack space metal housing15 amp rating (1800W) with rear panel circuit breaker (UL)Two front panel slide-out, swiveling lights for rack illumination and dimmer controls to adjust lamp brightnessTriple mode varistor surge and spike pr...
Specs:
Height | 7.3 Inches |
Length | 19 Inches |
Number of items | 1 |
Weight | 4.45 Pounds |
Width | 1.75 Inches |
12. Livewire 11-Outlet Power Conditioner and Distribution System
- Power conditioner system that will evenly distribute power to all connected devices
- 11-Outlets to supply power to multiple components
- Rack-mountable design allows the system to be easily added to any standard rack
- 2 Retractable lights that extend from the front panel to light up your gear
- This 11-outlet Power Conditioner from LiveWire is just what your rack of gear needs to maintain consistent voltage levels throughout all connected components
Features:
Specs:
Height | 2.2 Inches |
Length | 21.75 Inches |
Number of items | 1 |
Weight | 7.88 Pounds |
Width | 12.4 Inches |
13. Furman Pl-8 Power Conditioner and Light Module
- 2 slide-out, swiveling light fixtures for rack illumination
- Dimmer control for lamp brightness
- 8 accessory outlets in rear controlled by front switch
- Triple-mode varistor spike and surge protection
- RFI filtering
Features:
Specs:
Height | 2 Inches |
Length | 18 Inches |
Weight | 12 Pounds |
Width | 6 Inches |
14. Mugig Guitar Pedal Power Supply 9V USB Line Charging Effect Pedals Power Station 4 Regulated Outputs
- HIGHTLIGHT : USB charging allows that the power supply can be easily charged by POWER BANK
- PERFOMANCE : Powers four 9v pedals all at once without losing any signal intensity
- PROTECTION : Short Circuit Protection ensures the stable working condition
- VOLTAGE : Wide range of inputting voltage from 5v-19vDC
- PACKAGE INCLUDES :1*Power Supply, 4*DC cable, 2*USB to DC cable,1*User Manual
Features:
Specs:
Color | silver |
Height | 1.181102361 Inches |
Length | 3.56692913022 Inches |
Weight | 0.3968320716 Pounds |
Width | 0.88976377862 Inches |
15. ART PS8-II Professional Power Sequencer
- Non-Book/Non-Music Item
- 2015
Features:
16. Furman AR-1215 Standard Level Voltage Regulator, Power Conditioner, 120 Volt, 15 Amp
Eight outlets on the back panel, one on the front; Output capacity 15 amps; Eight-tap toroidal auto formerExtreme overvoltage/under voltage causes instant shutdown, protecting equipment; Extreme Voltage Shutdown indicator LEDOutput In Regulation indicator; Low stray magnetic field leakage
Specs:
Color | black |
Height | 4.5 Inches |
Length | 12.5 Inches |
Number of items | 1 |
Release date | August 2009 |
Weight | 12 Pounds |
Width | 21.8 Inches |
17. Furman PL-PRO DMC 20 Amp Power Conditioner with Voltmeter/ Ammeter
Isolated outlet banks minimize inter-component interference and noise contamination20 Amp rating featuring a high inrush magnetic circuit breaker for added protectionPerfect for instrument rigs, home recording, DJ equipment, pro audio rigs and home entertainment systems20 amp conditioner with 20 amp...
Specs:
Color | Black |
Height | 1.75 Inches |
Length | 19 Inches |
Number of items | 1 |
Release date | August 2009 |
Weight | 12 Pounds |
Width | 10.5 Inches |
18. Ebtech LLS-2 Line Level Shifter 2-Channel Box
- Increase or decrease signal voltage -10dBV and +4dBu without adding noise
- Also contains hum eliminator technology
- Also converts balanced and unbalanced signals
- 1/4” jacks can accept any combination of mono or stereo plugs
- Passive device No power required
Features:
Specs:
Color | Black |
Height | 3.5 Inches |
Length | 4.75 Inches |
Number of items | 1 |
Release date | July 2008 |
Size | 4.75″ (L) / 3.25″ (W) / 1.75″ (H) |
Weight | 1 Pounds |
Width | 1.875 Inches |
19. Furman P-2400 AR Power Conditioner True RMS Voltage Regulation Delivers Stable Voltage Output
20 amp AC line voltage regulatorSMP surge protection, non-destructiveLift is linear filter network to eliminate AC noise
Specs:
Height | 4 Inches |
Length | 12 Inches |
Number of items | 1 |
Release date | July 2022 |
Weight | 39 Pounds |
Width | 19 Inches |
20. Furman AR-PRO Global Voltage Regulator, 30 Amp, 120 Volt Output from 88V-142V and 170V-264V Input
Delivers 120 VAC ±4% anywhere within capture ranges of 88 to 142 and 170 to 264 volts AC, 50/60 HzFourteen regulated, conditioned outlets (2 front, 12 rear)Input capacity 30 amps; output capacity 22.5 to 30 ampsMultiple-stage spike and RFI suppressionMay be switched for 100V output for use in Japan
Specs:
Height | 6.5 Inches |
Length | 24.5 Inches |
Number of items | 1 |
Release date | August 2009 |
Weight | 56 Pounds |
Width | 23.5 Inches |
🎓 Reddit experts on power conditioners
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where power conditioners are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
https://www.amazon.com/dp/B00MWNYGUS/ - Adjustable clamp-jaw mount for cameras like the Logitech C920/922 (the most recommended cameras). Get a better or more unique angle.
https://www.amazon.com/dp/B00ACFAULC/ - Pop filters help a lot with audio quality.
https://www.amazon.com/dp/B017WNJS3M/ - Green screen it up and you can do all sorts of wacky or cool stuff, or it just cleans up the presentation of the stream in general.
https://www.amazon.com/Elgato-Stream-Deck-Mini-Customizable/dp/B07DYRS1WH - The streamdeck mini just came out, pretty useful for doing goofy on-demand stuff with programmable buttons. Some people swear by these.
For higher end stuff for audio, put this stuff in a wish list if he does start to take off:
https://www.amazon.com/Shure-SM7B-Dynamic-Microphone-Cardioid/dp/B0002E4Z8M - Probably my most recommended mic for people wanting to get into the more serious stuff.
https://www.amazon.com/dbx-286s-Microphone-Preamp-Processor/dp/B004LWH79A - Probably the best entry level audiophile grade mic preamp. This is endgame for streamers personally, it's way beyond what most people have and it will give him an edge.
https://www.amazon.com/Cloud-Microphones-CL-1-Cloudlifter-1-channel/dp/B004MQSV04 - Cloudlifter CL-1. This is a must if you ahve a Shure SM7B, excellent high end filter that will absolutely remove all noise.
https://www.amazon.com/Furman-M-8X2-Outlet-Conditioner-Protector/dp/B003BQ91Y6/ - Further eliminates noise from dirty power. Everyone who wants a decent XLR high-end setup wants something like this.
https://www.amazon.com/Allen-Heath-ZEDi-10FX-Compact-Interface/dp/B01ATAK5MS - This is an excellent mixer+audio interface combo, if you are going XLR you'll want a mixer. It's 4x4 USB, which for the price is a great value, and it's preamps and lines are notoriously silent. I bought the last version of this which was a 4x2 interface on a great sale, and couldn't be more pleased.
There's a lot more you can get of course. A simple small table rack to rack mount these things... But it all depends, the sky is the limit with this stuff. Just giving you ideas of how you can go nuts with it.
But at the core of it, if he's not organically growing by being consistent and working hard at it and trying to improve... Maybe he's just not entertaining enough? It is what it is. Don't think that buying this stuff really makes any difference, it only does if you are already able to gain viewers in the first place.
holy shit, that back panel looks like a cereal-box maze.
Its better. But velcro ftw. And kudos on the clever shelf -> cable ladder idea.
edit
Definitely dont mean to bum your high man, this is* an improvement. I'll make a few observations as a lay-person learning proper cable management techniques myself.
this is why zip ties are generally frowned upon. If its all you got, its better than nothing, but this is the way to go, by far. Zip ties may be "cheaper" but they aren't reusable.
It may never give you a hassle, but in production, thats a no-no, and its that way for a reason. Amperage draw specifically.
From the OSHA PDF (shakes head for quoting OHSA)
"when multiple power strips are
interconnected, the one directly connected
to the building outlet is often supplying
power to far more than the approved
number. This electrical current overload can
result in a fire or can cause a circuit breaker
to trip, deenergizing computers and other
equipment throughout the area."
that poor power delivery and circuit failure strains your devices and reduces life. I live in the real world too, where we have budgets and such. If you love your electronics, feed them well. Power conditioners not only evenly distribute power, but they clean up the spikes in the grid, making things easier on your gear.
Obviously there is some give and take in this, but the most beautiful SoHo Cable setups have boxes laid out logically, then the wiring wrapped to compliment. Exhibit A. Exhibit B. Note exhibit B bundles Data and Power together. Typically not a serious issue, but something to avoid if possible.
Sorry for the long edit, but my sarcastic humor floated to the top and I felt like an asshole. Kudos for your creativity. We learn things every time.
A TRS (stereo) 3.5mm cable should be shielded enough as far as the cable goes, but you could try something like this- https://www.amazon.co.uk/Ground-Isolator-HAVIT-Speaker-Filter/dp/B01IETQQQK/ref=sr_1_3?ie=UTF8&qid=1485469710&sr=8-3&keywords=Ground+Loop+Noise+Isolator
Another option to try would be cleaning up the source of electricity for the laptop. One way to do this is to use a UPS/battery backup that you can charge with the inverter, and then you plug the laptop into the UPS. This might be your best bet, but it would not clean up the power signal to the stereo.
There are also all sorts of power conditioners out there. For example, this is one that I used with my audio gear to clear up a hum from the old outlets in my apartment. I'm sure there's a UK equivalent- https://www.amazon.com/Furman-PL-PLUS-Amp-Power-Conditioner/dp/B001JJB2GM
EDIT: Didn't realize you also get a noise when a CD is playing. Cleaning up the power to the stereo itself could be complicated, depending on how it's wired in. They do make inline filters like this for these scenarios, but it could be hard to locate a specific source of noise. But definitely try the inline 3.5mm ground loop/noise isolator, it's cheap/easy.
Also, living on a narrowboat sounds awesome.
> but I don't know if they sell one with 4 ports.
You can get up to 6 keystone jacks in a 1-gang box
> I thought that I would buy a new rack-mountable switch and patch panel. This is what I've been considering:
Like /u/toaster_knight said, get a vertical or deeper one. I would strongly recommend an actual enclosure with a locking door for an office environment.
I also see no reason to put anything smaller than a 24-port in a rack. It's just a waste of space and money.
I would also recommend at least a SMB-level switch. Yes, they are more expensive, but their uptime and management capabilities are worth it IMO. The Ubiquiti 24-port switch is under $200 IIRC.
> I'm assuming that I can rest the router on top of the switch.
That will probably be fine, but you can get rackmount shelves and drawers as well. The shelf is nice because you can remove the switch without messing about with the router.
> I'd also like to buy some type of cable organizers for inside the ceiling. I normally use those small cable clips, but they seem to be intended for one cable. I've seen velcro used, but I'm not sure how to actually secure the cables.
You can get joist hangers, but inside a ceiling, the cables are usually just bundled and left loose or in a tray. If you have a drop ceiling, there are a wide variety of products designed for your support system.
I would also recommend a UPS and a power distribution panel. UPS for obvious reasons and the power panel will let you easily power cycle each component without having to dig into the back--something that gets much harder after rack-mounting.
Ok so by the looks of it he's got the effects pedals covered, I would go for something else and let him get anther pedal on his own. These are my recommendations that will benefit his current setup.
This is a nice expensive version of this and this is a midway between the other two. These are power conditioners they will help his equipment operate more efficiently and quieter and will last decades(you can use them for home theatre use as well)
I would also recommend nice cables like these they are lifetime warranty. Here's another very useful maintenance kit that will last a very long time. If you pick the 110$ furman you can get all three.
> look at getting something like a Radial ABY switcher
This is probably the issue but he might need more than an ABY because they typically only have a single input. It can help if you put it between your mono and stereo pedals, though. I have this one and it is a premium pedal made in Canada. It can also help if you have phasing issues between the two amps, which is why I bought it.
I would suspect that the ground loop might be eliminated by trying a power receptacle on another wall or from another room. If that doesn't fix it, you may want to buy a more high end power supply with reliable, transformer isolated power jacks and try not to daisy-chain any pedals if you can help it.
The bad news is, the best power supplies are kind of expensive. The good news is, the best ones last forever and you'll never have to worry if it's the problem, or source of noise again.
You're welcome. As mentioned elsewhere, the order of powering things on matters in some cases, so - power amp on last, if nothing else. I have a rack, and with both my conditioner and my amp's power switches on the front, it's easy. There are fancy/expensive power conditioners that can turn things on in sequence, but if you have a lot of hardware, even a basic/cheap conditioner is worth the money.
Also, in case you want a recommendation, /r/audioengineering (and others) pretty much swear by Furman. I have one of these and it's great.
I've been researching Power Conditioners, and there are a lot of differing opinions out there. I'm wondering if anyone here has an idea if it would be worth it to purchase something along these lines in order to improve my sound quality and/or protection, and if so, which one would be best. Thanks!
Furman
Nady
Pyle
This one is pretty popular:
http://www.amazon.com/EBTECH-HE-2-Ebtech-Hum-Eliminator/dp/B0002E4YH4/ref=sr_1_2http://www.amazon.com/EBTECH-HE-2-Ebtech-Hum-Eliminator/dp/B0002E4YH4/ref=sr_1_2?ie=UTF8&qid=1397236641&sr=8-2&keywords=hum+eliminator)
This is pretty popular as far as power conditioners go:
http://www.sweetwater.com/store/detail/PL8C?utm_source=Google&utm_medium=PPC&utm_campaign=accessory&utm_term=furman_power_conditioner&adpos=1t1&creative=9557897641&device=c&network=g&matchtype=e&gclid=COya9vf42L0CFU1bfgodRnkA_g
Furman M-8Dx Merit Series Power Conditioning, 15 Amp, 9 Outlets with Wall Wart Spacing, Pullout Lights, Digital Voltmeter https://www.amazon.com/dp/B00145EVJ6/ref=cm_sw_r_awd_R6FRub1R3NDCV
Best investment you can make to protect your gear. Along with a UPS to protect from brown outs.
As others have said, that's ground hum. The pro option to get rid of it is a power conditioner. You can buy one for under $100. Make sure all of your gear is plugged into only that.
The next best option is changing where you plug things into your mains power, a.k.a. the wall. If you have equipment on different circuits in your house, that can cause that kind of hum as well. Do you have things plugged into different walls? If so, plug them all into the same outlet pair and see if that doesn't help.
If you can't do that because you need too many mains connections, you either need a power conditioner (my recommendation) or at the very least a decent power strip so everything is running off the same mains circuit.
I use one of these https://www.amazon.com/Livewire-11-Outlet-Conditioner-Distribution-System/dp/B007CTY0YE which works fine. Can't endorse it too strongly as I didn't do any comparison testing and there may be better stuff in the same price range, but it definitely works fine for me. Try just changing outlets first though and it may go away.
According to this article (it seems pretty trustable because of their testings that they've listend)
the best is the Furman Powerstation 8
https://www.amazon.com/dp/B000YYVLAK/
For the microphone stand if you ever wanna change it...
https://www.sweetwater.com/store/detail/PSA1Rode--rode-psa1-professional-studio-boom-arm
These are excellent, I'm pretty sure Joe Rogan uses these now... can't remember. And he uses the SM7B so that was a noteworthy mention in your post.
For your other stuff...
https://www.amazon.com/dbx-166xs-Professional-Compressor-Processor/dp/B004NDJRKO/
Pick up one of these one day. You don't seem to use a limiter, your strip doesn't have one, and this will handle that, and this would solve the volume extremities issue with your stream where my wife gives me that look because you start yelling at some alt-right dipshit after I could barely hear you talking a second earlier. Thanks.
Then I would change out your mixer one day. It might have some noise you aren't happy with in the preamps (maybe not), and if so try one of these out. Allen and Heath is famous for having completely perfect preamps
https://www.sweetwater.com/store/detail/ZED60-10FX--allen-and-heath-zed60-10fx-mixer-with-usb-and-effects
They make a much smaller one as well if you don't need that many channels, obviously.
https://www.sweetwater.com/store/detail/ZED6FX--allen-and-heath-zed-6fx-mixer-with-effects
But I'm not sure if it's up to the same standards and if you do that deal where you send some audio back in from the mic out on the computer, I always forget the terminology that podcasters made for that trick. Basically to isolate who is talking to you and put it into the mixer directly and you hear it and your audience hears it, and you can turn them down, etc... On my allen and heath I had to mess with it a bit to make that work right. Something to consider.
If you don't already use a RACK, might as well.
https://www.amazon.com/StarTech-com-Desktop-Frame-Components-RK8OD/dp/B01NBPL8OP/
And I'd advise something like a power conditioner in the rack as well, keeps the gremlins out. I'm paranoid about sound, I use their cheaper power strips for my setup and it feels like it makes a difference, but maybe I'm tricking myself.
https://www.amazon.com/Furman-Conditioning-Outlets-Spacing-Voltmeter/dp/B00145EVJ6/
Just little things, but they probably won't be worth it overall. Stuff you might add to an amazon list or something. I'm a list guy. ;)
That's the idea. I have them connected to a MBP, through a Yamaha 6-channel board, over XLR connections. I'm pretty happy both with their clarity and their sound output (90dBA output SPL per the specs - sounds about right). I do have them running through one of these however.
If you're looking for a ton of bass, you won't find it here without buying a separate sub (although they may surprise you for being 5" woofers). Otherwise their 8" pair should fit the bill pretty well, but they will cost twice as much for the pair.
I don't mean to reply on all your comments, haha. I have 3 of these but they might be what you are looking for. I got them a while ago when they were like $20 I believe https://smile.amazon.com/Eliminator-E107-Control-Center-S-Switch/dp/B000GASJF2/
They are meant for DJ lighting so you might be able to find some locally for a better price.
If none of his suggestions work, plug your amp into a power conditioner. I have this one in my recording rig because my audio interface is ungrounded and I was getting that hum until I added it. Pretty affordable for audio gear and Furman is a pretty trusted brand name.
Quick question, do you have any power conditioners? It's one of the first things I recommend when people have power problems. It'll also serve as a nice surge protector. They can be had for like 80 bucks and will save you a lot of hassle. From the sound of it, it's a ripple from shitty electricity, It'll clean up most power problems. Here is a good one. Also, is this a system you bought from PartsExpress by chance?
Furman is a popular brand. Buy the most expensive one you're willing to pay for that has good ratings. I own a really basic rack mount one and it works great. The M-8X2.
A power conditioner is arguably the most important thing in your signal chain. It will eliminate all line noise and and it also provides surge protection. No more pops or clicks turning things on and off. No more random noise in your mixer from questionable outlets at old venues. Piece of mind knowing your thousands of dollars of gear are protected.
This thing: https://www.amazon.com/dp/B07841Z83P
It's super awesome. It's cheaper than a normal 120VAC->9VDC adapter and also provides isolated power so these devices don't leak ground noise back into the DC.
I hid it on the backside of the board because I never have to interact with it.
Those look like speakon connectors for what it's worth.
Furman has some rack lights- leds on goosenecks. It looks like they discontinued their combo power conditioner/lights where the knobs you see in the picture are actually tubes which pull out, illuminating a stack.
You may want to look at pro-audio suppliers, as they have a big need for discrete rack lighting for concerts and other gigs.
Popping like that I suspect a failing resistor or tube. If it happens when it's really warmed up maybe a resistor, if it happens any time I'd say try swapping the tube.
Definitely try swapping all the cables, speakers cables, other cabs if possible to rule everything out and be sure it's the head.
>It's plugged into a line conditioner
An actual voltage regulator or something more like a standard furman? The standard devices don't do much of anything for you.
I actually have an empress echosystem. Maybe that helps in someway? Is this the furman thing you are talking ab? I’d just replace my regular surge protector with it?
Furman M-8X2 Merit Series 8 Outlet Power Conditioner and Surge Protector https://www.amazon.com/dp/B003BQ91Y6/ref=cm_sw_r_cp_api_jhsDAbMH0ZY71
Depends on what your power situation looks like. I agree with other comments that you don't need the individual switches. However, you may want a battery backup. I like the APC rackmount UPS units. However, if you already have reliable power, and you just want clean power, you can also look into a Furman power conditioner. Otherwise, there are plenty of good rackmount PDUs out there. Personally, I use an APC UPS on it's own, but my rack isn't fully contained and is in a closet full of gear.
This is either your 'Gain' set too high, or a grounding power issue to your computer/audio interface. I've personally had to buy a power conditioner to fix this issue. Something like this. You should also check to confirm you're actually using the SM and not a built-in mic or webcam mic. You may also get more help by posting this to /r/audioengineering/ as it's not much of a CSGO issue as much as an audio issue.
Also saw this
https://www.amazon.com/Furman-Standard-Conditioning-Outlets-Spacing/dp/B0014598WQ
Now I'm still having trouble understanding the benefit of the APC or Cyberpower over something like the TPLink below.
https://www.amazon.com/dp/B0000AI0N2?ref_=pe_623860_70668520
Can you also explain how these work with modern day devices and having multiple hooked up drawing power? If I have my Sub, AVR, TV, PS4, Switch, etc that like 5-6 devices all pulling energy. I assume most of these surge units just plug into a standard wall socket and and provide enough juice for all devices without causing one to shut down or function incorrectly due to lack of juice.
If it is a simple power strip with a label, that's crappy.
​
However, if it has some kind of Power Conditioning built in to smooth out the power, then it might be worth something. Would have to tear it down to see how it functions and if it's worth it.
​
You should be the guinea pig and buy it, do a tear down and see what makes it tick to see if it is anything special :)
​
I mean, look at this, it might not be hard to reconfigure it to work in a power bar type of form factor.
https://www.amazon.ca/gp/product/B003BQ91Y6/ref=s9_acsd_top_hd_bw_b9AIQrT_c_x_w?pf_rd_m=A1IM4EOPHS76S7&pf_rd_s=merchandised-search-11&pf_rd_r=6SCFDE35ND5CS1AETXZ0&pf_rd_t=101&pf_rd_p=5f4660f5-92fb-57e0-933c-c6798bcfacba&pf_rd_i=8397352011
This one on Amazon seems like a good place to start. Get one of these for your "always plugged in" gear, then a standard $10 Home Depot power strip for more flexibility. I also should have mentioned that it's a bad idea to "daisy chain" your power strips. One wall outlet = one power strip.
Wow, didn't know those existed, thanks for the link!
I just might have to upgrade my mixer and get one of these suckers.
EDIT: Also just found these hum eliminators which work on TRS/TS cables!
This: https://www.amazon.com/Furman-Aluminum-8-Outlet-Protection-Conditioning/dp/B000YYVLAK/ref=pd_bxgy_267_3/141-8697585-1408408?_encoding=UTF8&pd_rd_i=B000YYVLAK&pd_rd_r=096b52cd-a969-46dd-8144-9a61bcb4a9de&pd_rd_w=LveMb&pd_rd_wg=6W71d&pf_rd_p=3edd75bb-e36e-488e-b666-80dd1a52c658&pf_rd_r=FCRB4MRYZYE5CD032RYX&psc=1&refRID=FCRB4MRYZYE5CD032RYX
These are far superior to your typical strip that uses sacrificial MOVs. Even the more expensive Trip-lite Isobar products use MOVs.
it already exist
Good option here
https://www.cablewholesale.com/products/fire-security-cables/power-supplies/product-90w2-19112.php
others
https://www.amazon.com/Mount-Supply-Channel-12Amps-output/dp/B00A2WJTHG
https://www.securitycameraking.com/16-channel-rack-mount-12v-59105-prd1.html
https://www.altronix.com/products/R1224DC16CB
https://www.amazon.com/Jim-Dunlop-11403000001-MC403-System/dp/B003KIL2L0
or potentially cheaper, get a music pedal power supply and print out rack ears for it
https://www.amazon.com/Donner-Guitar-Supply-Isolated-Output/dp/B00WHLLDWO
You have to be very careful with this route as guitar pedals use reverse polirity for their power. Rewiring the cables is a must.
Actually it's a production model. If you didn't know that, you're welcome! Check it out http://www.amazon.com/Jim-Dunlop-MC403-Power-System/dp/B003KIL2L0. I would shop around for a price, I was able to get it for around $220.
I'm sorry, but even if this were the case, there are more affordable line conditioners that aren't from the highly overrated Monster: http://www.amazon.com/Furman-Standard-Conditioning-Outlets-Spacing/dp/B0014598WQ/ref=sr_1_24?s=electronics&ie=UTF8&qid=1290938856&sr=1-24
Or even UPSes: http://www.amazon.com/OPTI-UPS-SS1200-Stabilizer-Automatic-Regulator/dp/B0007P11M4/ref=sr_1_13?s=electronics&ie=UTF8&qid=1290938856&sr=1-13
As far as the issue op is experiencing is concerned, a line conditioner will not help with this.
Line conditioners prevent interference effects like ghosting. The video being behind the audio is a synchronization issue between the video processor and the uninhibited output of the audio, which has nothing to do with EMI.
I don't know what that is. Like this? https://www.amazon.ca/Furman-M-8X2-Outlet-Conditioner-Protector/dp/B003BQ91Y6/ref=sr_1_1?keywords=furman+pc&qid=1574539708&sr=8-1
I was thinking about getting this and adding it to my rack: https://www.amazon.com/Furman-M-8X2-Outlet-Conditioner-Protector/dp/B003BQ91Y6/
​
That way I can turn everything off in one place.
​
They have one that's more like a power strip too.
​
​
​
Thank you, this looks like what I need. If I get something like the Furman M-8×2, should I be plugging everything into that directly or is running the power strips I already have into that an option? (Or would it be defeating the purpose somehow?)
I use a Furman PL-8C power conditioner and a couple Furman Plug Locks to plug everything in. Everything turns on with the flip of the switch on the front of the power conditioner. Super convenient and no noise.
Using a generic line splitter pedal. Would something like the Ebtech Hum Eliminator do the trick?
https://www.amazon.com/EBTECH-HE-2-Ebtech-Hum-Eliminator/dp/B0002E4YH4/ref=sr_1_6?hvadid=78134097853197&hvbmt=be&hvdev=c&hvqmt=e&keywords=ground+hum+eliminator&qid=1568293974&sr=8-6
I use this one: https://www.amazon.com/Furman-M-8X2-Outlet-Conditioner-Protector/dp/B003BQ91Y6
Works great, but you could probably find a less expensive one... I wouldn't go for a cheaply made power strip or conditioner, though.
I had the same thing, even with my Scarlett 18i6 interface. It's likely caused by a dirty A/C signal in your home's wiring. I bought this and it cured the problem completely for me for my computer's previous location in my humble studio. Since, I've moved to another outlet; there is a very slight hiss but it's 1,000 times better than it was originally. If you want to test this theory before spending any money, you can try other outlets in your home and/or listening from a friend's house, library, etc.
I have a weird pulsing "chirp" tone coming through almost any audio device, also through my PC power supply. Its definitely coming from the mains power in my house. Will this power conditioner "clean" my power and remove this pulsing chirp?
I recall someone on buildapc had a similar issue before. Their solution was to get a power conditioner... something like this or this may fix the issue.
They're commonly used for audio equipment where audible noise can result from dirty power.
Furman M-8X2
Not the fanciest, but I needed something reliable and solid.
Economies of scale. Everyone uses these not just homelab users so they're cheaper.
At $110 I have no problem getting one of the nice ones for my shop(oscilloscopes tend to be sensitive) and HTPC setup.
Edit: They even have cheaper ones down at $58 with good reviews.
I do not know where you've been looking at power conditioners for $1200, here is one on amazon for $70
Check to see if any part of your network is running parallel with high voltage cabling. I would attempt directly connecting to your LAN if your on wireless. Another option is to condition the power for your computer and router/hub.
Link to amazon:
http://www.amazon.com/gp/aw/d/B003BQ91Y6
What you are looking for is called a power sequencer. They're pretty common in the AV world. They're not super cheap, but probably cheaper than 8 smart outlets, and there's a lot less to go wrong.
Ex) https://www.amazon.com/dp/B075TTMSHS/
I would try it first after the pedals and before the FX loop return.
I would recommend the Ebtech, it's cheaper than the Palmer and it's got two channels so you could isolate before and after the pedals if need be. They would both do the job though.
Non-mobile: http://www.amazon.com/dp/B000GASJF2/ref=mp_s_a_1_14?qid=1427764867&sr=8-14&pi=AC_SX110_SY165_QL70&keywords=rackmount+power+strip
^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble. ^WUT?
Here are some "Rack Essentials"
Shelfs/Rails:
https://www.amazon.com/NavePoint-Adjustable-Mount-Server-Shelves/dp/B0060RUVBA/ref=sr_1_1_sspa?ie=UTF8&qid=1510637469&sr=8-1-spons&keywords=1u+rack+rails&psc=1
https://www.amazon.com/Navepoint-Fixed-Vented-Server-Adjustable/dp/B01A6JQYDG/ref=sr_1_6?ie=UTF8&qid=1510637496&sr=8-6&keywords=1u+rack+shelf+sliding
https://www.amazon.com/Navepoint-Sliding-Vented-Server-Adjustable/dp/B01A6JQPFI/ref=sr_1_8?ie=UTF8&qid=1510637508&sr=8-8&keywords=1u+rack+shelf+sliding
Drawers:
https://www.amazon.com/NavePoint-Server-Cabinet-Locking-Lockable/dp/B009WS7TSW/ref=sr_1_4?s=musical-instruments&ie=UTF8&qid=1510637549&sr=1-4&keywords=1u+rack+drawer
Fans:
https://www.amazon.com/AC-Infinity-CLOUDPLATE-Airflow-cooling/dp/B00ZQPDB7I/ref=sr_1_5?s=musical-instruments&ie=UTF8&qid=1510637586&sr=1-5&keywords=rack+fan
Switched PDU
https://www.amazon.com/Eliminator-E107-Control-Center-S-Switch/dp/B000GASJF2/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1510637607&sr=1-1&keywords=individual+switch+pdu
Maybe you will find some of that stuff useful...
https://www.amazon.com/Furman-M-8X2-Outlet-Conditioner-Protector/dp/B003BQ91Y6
Get 2 of these:
https://www.amazon.com/Ebtech-LLS-2-Level-Shifter-2-Channel/dp/B0002MSVDY
Just place your UPS on a shelf or the floor and run a cable up to one of these
http://www.amazon.com/gp/aw/d/B000GASJF2/ref=mp_s_a_1_14?qid=1427764867&sr=8-14&pi=AC_SX110_SY165_QL70&keywords=rackmount+power+strip
This should help...
Also, think about getting yourself a Furman Power Conditioner.
Option One, Option Two, Option Three
I don't know how much your amps cost (mine are probably way cheaper) and they're on a beast of a power protection system.
Dawg .. https://www.amazon.com/Furman-M-8X2-Outlet-Conditioner-Protector/dp/B003BQ91Y6/ref=sr_1_3?ie=UTF8&qid=1504258288&sr=8-3&keywords=furman
Maybe you need a power conditioner?
https://www.amazon.com/Furman-M-8X2-Outlet-Conditioner-Protector/dp/B003BQ91Y6/ref=sr_1_4?s=musical-instruments&ie=UTF8&qid=1537575727&sr=1-4&keywords=pyle+power+conditioner
http://www.amazon.com/Furman-Series-Outlet-Conditioner-Protector/dp/B003BQ91Y6/
Does this look about right?
you might have some power issues in your home and may need a power conditioner. I have this one (https://www.amazon.com/Furman-M-8X2-Outlet-Conditioner-Protector/dp/B003BQ91Y6) and it has worked wonders and cleaned up all my hums and doubles as a surge protector, protecting all your hard earned expensive gear.
Isn't this better?
https://www.amazon.com/EBTECH-HE-2-Ebtech-Hum-Eliminator/dp/B0002E4YH4/
Balancing and unbalancing, with no level change.
You really should just stop embarrassing yourself. You don't have electrical knowledge. If you didn't you wouldn't be saying this.
Your cheap furman does not change the voltage on the output. The fancy volt meter on the front just displays the voltage.
Here is a Furman voltage regulator. See how much more expensive it is?
https://www.amazon.com/Furman-AR-1215-Standard-Regulator-Conditioner/dp/B000YZ46E2
rent or borrow a transformer isolated power regulator for a night and report back.
https://www.amazon.com/Furman-AR-PRO-Regulator-88V-142V-170V-264V/dp/B0006HHNOI/ref=sr_1_6?s=musical-instruments&ie=UTF8&qid=1497365115&sr=1-6&keywords=furman+voltage+regulator+ar
https://www.amazon.com/Furman-Conditioner-Voltage-Regulation-Delivers/dp/B003L9VVHS/ref=sr_1_3?s=musical-instruments&ie=UTF8&qid=1497365115&sr=1-3&keywords=furman+voltage+regulator+ar
these are NOT power conditioners or filter units. they run HEAVY transformers (both these units are at or over 50lbs - with NO batteries think about that) and you have basically brand new power coming out the other end. get something similar to this and this problem goes away.
Still not grounded correctly. Try to ground each of them separately to see if the hum changes/disappears. Could be numerous things: TT, preamp, receiver, or even your house wiring (hopefully not this). I would google "ground stereo equipment" or something similar and try to follow the different steps in order to isolate the problem. There are also products made to eliminate ground loop hum such as Hum Eliminator and Hum X Voltage Hum Filter. I actually used the second one at an old house I rented which had shit wiring and it eliminated the hum I always got when connecting my TT to my computer for sampling and then played out through the receiver. I have it in my current house to the outlet my stereo equipment is plugged in though it's probably more for show now than actually functionality.