Reddit mentions: The best powerspots wiring harnesses
We found 13 Reddit comments discussing the best powerspots wiring harnesses. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 7 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. PAC ROEM-NIS2 System Interface Kit to Replace Factory Radio and Integrate Factory Amplifiers for 1995-2002 Nissan Vehicles with Bose Audio Systems,Black
- System interface to replace factory installed receivers and integrate factory amplifiers
- Adjustable 4-channel RCA outputs
- Isolated transformer inputs and outputs
- For 1995 - 2002 Nissan vehicles with Bose audio system
- Easy Installation
- System interface to replace factory installed receivers and integrate factory amplifiers
- Adjustable 4-channel RCA outputs that provide Line Level Matching
- Isolated transformer inputs and outputs
- Trigger wire included
- For 1995-2002 Nissan vehicles with Bose audio system
Features:
Specs:
Color | Black |
Height | 8.5 Inches |
Length | 8.5 Inches |
Number of items | 1 |
Weight | 0.6 Pounds |
Width | 4 Inches |
2. Universal Plug-n-Play Wiring Harness for Motorcycle Air Horns
Works great with Wolo Bad Boy & Stebel Nautilus Air HornsEverything pre-assembledHeavy-duty 30 Amp relay20 Amp fuse14 feet of Heavy-duty wire
Specs:
Size | 44.7CC |
3. Genuine Kawasaki Ninja 400 Relay 99994-1040
Only one Relay Kit required per Ninja 400 motorcycle
Specs:
Number of items | 1 |
4. GOOFIT Ignition Rebuild Kit Wiring Harness for 50cc 90cc 110cc 125cc Chinese ATV Quad Bike Go Kart Buggy
Ignition Rebuild Kit Wiring HarnessPackage including ignition switch,spark plug,kill switch,solenoid relay,CDI(come as picture show)Fit for 50cc 90cc 110cc 125cc ATV Quad Bike Go Kart BuggyArrival within 1-2 days (Sold by GOOFIT and Fulfilled by Amazon)Arrival within 7-15 days (Ships from and sold b...
5. GOOFIT Rebuilt Ignition CDI Wiring Kit Harness for 50cc 70cc 90cc 110cc 125cc Stator CDI Coil ATV Quad Bike Buggy Go Kart
- Wiring harness Cdi ignition coil kit for 50cc 70cc 90cc 90cc 110cc go kart kick start dirt bike pit bike quad
- Package as picture show:ignition switch key,spark plug,CDI,wiring harness
- 100% new,good quality and durable,It can perfectly replace your product and is easy to install
- Replacement for Taotao,Lifan,Ducar,Shineray,YX and other Chinese bike
- Warranty:We are always available to help our customers.Please message us for replacement or refund if you are not satisfied with the order
Features:
6. Koolance CBL-NX006P 4-Fan Wiring Harness, 3-Pin
- Four 3-Pin female fan connections combine into a single 3-pin male connection.
- For combining or extending radiator fans.
- One of the connections features a tachometer wire that is extended to the male connection.
- Approximately 24" (31cm) long.
Features:
Specs:
Height | 1 Inches |
Length | 2 Inches |
Weight | 0.0881849048 Pounds |
Width | 3 Inches |
7. Hit-Air Coiled wire for Motorcycle
- Attach to your motorcycle and then clip in to your Hit-Air Jacket.
Features:
Specs:
Color | Black |
Height | 0.46850393653 Inches |
Length | 9.53149605327 Inches |
Weight | 0.0440924524 Pounds |
Width | 4.72047243613 Inches |
🎓 Reddit experts on powerspots wiring harnesses
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where powerspots wiring harnesses are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Doing what you're proposing will end one of three ways:
The adapter you listed are for specific amplifier models designed to accept speaker-level inputs via the RCA cables. These aftermarket amplifiers generally have a switch to change the input type from line level to speaker level so you don't go burning things up.
There probably is a plug and play solution out there to wire an aftermarket deck to your factory amplifier that isn't hacky. I suggest googling it. "[auto year make and model] retain factory amplifier" should do the trick. Like "1999 Nissan Maxima retain factory bose amplifier" results in a PAC ROEM NIS2 adapter.
This is what I used for my 06 altima ser with Bose Works perfect and super easy to install. Was my second time doing a install.
It was extremely easy. I used this wiring diagram: http://s222.photobucket.com/user/HOTTTiEBOi7/media/g35_pacoem2_to_jvs_kw-avx820_zps17433e60.jpg.html
I had to splice some wires, but everything was plug and play from there. I wouldn't recommend the headunit/adapter combo I got because I had to sand down the adapter a bit to fit it over the head unit.
you need a relay. I used this wiring kit to install mine. super simple and totally worth the 20 bucks.
Sure thing! Below is all you need (minus soldering iron if you go that route, but I got one for 17 bucks from Home Depot).
BEWARE - will require soldering the little harness you need to make to plug adapter into the bikes harness (unless you can find some bullet connectors that crimp instead of solder). The soldering was easy compared to getting the knock-out panel off without taking the fairings off lol There’s a little screw that keeps it on and it’s a bitch to reach!
Relay - Genuine Kawasaki Ninja 400 Relay... https://www.amazon.com/dp/B07MTKPMV9?ref=ppx_pop_mob_ap_share
Unit: OontZ Angle 3 (3rd Gen) -... https://www.amazon.com/dp/B07F84VVB4?ref=ppx_pop_mob_ap_share
Bullet Connectors (requires solder) - Hobbypark 10 Pairs Female Male... https://www.amazon.com/dp/B071WK8TS2?ref=ppx_pop_mob_ap_share
Best Buy did not sell me that adapter, unfortunately.
While researching the LP6-4 I stumbled upon this: https://www.amazon.com/PAC-ROEM-NIS2-Interface-Integrate-Amplifiers/dp/B000CE9OY2
$20 cheaper and addresses the issue of connecting to Bose amps in a Nissan. Just ordered it - will update after I hook it up.
Check this out at Amazon.com
GOOFIT Ignition Rebuilt Kit... https://www.amazon.com/dp/B01L6ZM4LA?ref=ppx_pop_mob_ap_share
I am speaking from personal experience on my own car and I'm not sure if it'll pertain at all to your situation so take it however you want.
I own a 2006 G35 with factory bose amp and if I did not use the correct interface kit and spliced the headunit cables directly to the factory audio interface, i would experience the same exact symptoms you did. This was because on my car the bose amp needed to havea the correct signal supplied to which was only possible with this interface kit: https://www.amazon.com/PAC-ROEM-NIS2-Interface-Integrate-Amplifiers/dp/B000CE9OY2
again this is for my car and I dont know if you have a factory amp or anything but maybe its something you can look into
For starters your terminology is wrong. A honda shadow does not use clutch fluid. A master cylinder has nothing to do with the clutch.
1.) Clutch Issue - your bike uses a wet clutch, meaning the clutch plates are soaked in the same oil as your engine. The "engine oil" is what you should need to change. I recommend using Shella Rotella T. You can buy it at WalMart and it's rated for wet clutch bikes, don't get the synthetic version. Your master cylinder is for your front brake. Use DOT 4 or 5 fluid, check manual. If your unable to bleed the system and get all the air out then you may very well need to rebuild it.
2.) Ignition, starter won't crank without engine running, this means your battery was shot. Had no juice or CCA (Cold Crank Amps). I would avoid jumping the solenoid. Just ebay a new/used one.
3.) Horn - Mount it anywhere secure. Not sure if you noticed but you'll need to get the harness for that horn (https://www.amazon.com/Universal-Plug-n-Play-Wiring-Harness-Motorcycle/dp/B0028ZKMM6/ref=pd_bxgy_263_img_2?ie=UTF8&refRID=AEDYQ957XTTS0TBNDYMD)
I'm not a 100% sure... I bought all the parts and then had a shop install it...
I did purchase this so I was under the assumption that the Bose stuff was still being used: PAC ROEM-NIS2 System Interface Kit to Replace Factory Radio and ... https://www.amazon.com/dp/B000CE9OY2/ref=cm_sw_r_sms_awdb_t1_kewKBbKMG7D5B
The installer said he wasn't needed, but I didn't get it back, so I'm not sure if it was installed or if they just kept it.
Found it! but shipping is $12!! Ridiculous.
They come with lanyards that are attached to the bike. When you get on the bike you clip the vest to the lanyard.
https://www.amazon.com/Hit-Air-Coiled-wire-for-Motorcycle/dp/B0025TMZ4I/ref=sr_1_12?keywords=hit+air+vest&qid=1574061231&sr=8-12
I broke some ribs a few years ago and as anyone who has had broken ribs will tell you, breaking then once is enough! So I got a couple of these (Hit-Air) vests after that, one for me, one for whoever is on the back at the time. I’ll write up a kinda review of what it’s like using these things if anyone asks, but bottom line is they are fine and weirdly, after using them for a couple of weeks, not having one on feels like not having a crash helmet on - kinda naked.
Someone above mentioned that setting one off at a petrol station etc might be possible if you forget to unclip the vest, but I’ve forgotten loads of times and you feel the cable tug the vest so that reminds you it’s there. Never have set off the vest by accident in two years.