(Part 2) Best products from r/300BLK
We found 19 comments on r/300BLK discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 38 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. Gladiator GAWB04HWEG Adjustable Height Hardwood Workbench, 4'
48" W x 27.5"–40.8" H x 25" D1-3/4" Thick solid hardwood top3, 000-lb max distributed weight capacityAdjusts to meet ADA height requirementsUv-cured protective coating on Hardwood top to help resist staining from common Garage chemicalsOne-year limited warranty on Hardwood top and lifetime limited...
22. Brightech LightView PRO - Comfortable LED Magnifying Glass Desk Lamp for Close Work - Bright 2.25x Magnifier Lighted Lens - Puzzle, Craft & Reading Light for Table Top Tasks - White
- Magnifying Glasses With Light For Close Work: This magnifying glass with light is designed for people who need continuous close proximity work or anyone who needs visual aids to reduce eye fatigue. With high-quality lenses, you won’t feel dizzy when you use it for reading, cross-stitching, sewing, painting, needlework, and other small projects. Things are in focus 8" away.
- Adjustable Magnifying Desk Lamp With Swing Arm: The glass lens can be adjusted up and down, you can keep the magnifying glasses lit for close work at any angle, freeing both hands. Suitable for repairing electronics, soldering, crocheting, painting, jewelry, facial, manicure, puzzles, etc.
- 20 Year Life LED Lights For Max Durability - The genuine diopter magnifying glass doesn't warp with time or heat, and is also scratch-resistant. So it lasts longer than cheap acrylic/plastic mag lenses that warp in heat and scratch easily, causing replacement hassles in little time. The 9W & 650 lumen LED lights are built-in and last 20,000 hours - about 20 years of use for 3 hours/day!
- 225% Magnification Lamp For Estheticians Microblading: Mount to a stand in your garage or workshop, and you'll be able to see the finest details or spot the smallest flaws in any task with our 2.25X lens. A perfect work light for doing facials & eyelash extensions. Brightech’s 56-LED magnifying glass with light always stays cool, even after hours of use.
- 3 Year Product Warranty: We proudly stand behind all of our products 100% and offer a full 3 year warranty. This will cover you if the magnifying glass with light stops working within 3 years or if there are any defects within those 3 years.
Features:
23. McNett Tactical Camo Form Protective Camouflage Wrap, ACU
Adhesive-free, self-adhering camoflauge fabric wrap; protects guns and equipment from field scratchesHeavy duty stretch fabric wrap clings to itself; wraps and conforms to any shape; dramatically improves grip and insulates hands from hot or cold surfacesEasy to cut; one 2" x 144" roll covers a stan...
24. BW Casey Aluminum Black Touch-Up 3 oz
Room temperature chemicalUsed by gunsmiths and industry to blacken aluminum partsRestores scratched & marred areas quicklyRestores scratched and marred areas quicklyColor will vary from deep gray to black depending on the alloyDesigned to work at room temperature to blacken aluminum partsUsed to cov...
25. Vortex Viper PST 1-4x24 Riflescope with TMCQ MOA PST-14ST-A
The Viper PST 1-4x24 Second Focal Plane boasts features associated with top-tier riflescopes. The one-piece, shock proof 30mm tube, precision-machined from a single solid block of aircraft-grade aluminum, offers ample windage and elevation adjustment.Matching reticle and turret measurements allow ac...
26. Meprolight Heckler & Koch Night Sight fits MP5, 91, 93 & 94. This set has a green rear and front sight
- Designed for and proven on the battlefield
- Used and trusted by militaries, law enforcement, and professional shooters world-wide
- Meprolight products are designed to provide fast and accurate target acquisition
- Get the Meprolight Advantage
- Unequaled Low Light Performance
- Brightest Night Sights Available Today
- Used by Military and Law Enforcement
Features:
27. Rotary13B1 Remove Before PEW PEW - 5 Pack Key Chains
Qty: 5 KeychainsDesign: Double SidedSize: 12.5cm x 2.5cm , OR 1 inch x 5 inchesKeyring Size: 25mmTotal Keychain Length: 15cm
28. Holosun HS403B Micro Red Dot Optic (2 MOA),Black
- SHAKE AWAKE TECHNOLOGY: Holosun’s Shake Awake technology turns off the LED function when times of inactivity are detected. The time it takes for LED to power down is completely user-programmable and customizable.
- OPTICAL SIGHT: The HS403B is a 20mm micro-optical sight designed for shooting equipment and carbine applications, built with 50,000 hours of battery life.
- INNOVATION: Holosun maintains a commitment to creating innovative optic and laser/IR technologies for a wide range of shooting, hunting, law enforcement and military needs.
- WHAT CUSTOMERS ARE SAYING: Customers love the clear lenses, easy to adjust brightness settings, and when not in use, if left on, it shuts down and goes into sleep mode. -Satisfied Customer(June 2018)
- FOR BEST RESULTS: Try the Holosun HS403C, a micro red dot sight with automatic brightness adjustment. The HS403C utilized solar failsafe and shake awake technology while providing the micro red dot with clarity.
Features:
29. UTG 3X Magnifier with Flip-to-side QD Mount, W/E Adjustable
Broadband Multi-coated Lens to Provide Crystal Clear 3X Image, Wide Field of View - 30% Bigger Than Comparable Models from Other Brands.Compatible Rail-Picatinny/Weaver.Windage/Elevation Adjustability for Optimum View Centering. Refer user manual for list of compatible manuals42mm Center Height for ...
30. Sightmark SM26005 Ultra Shot M-Spec Reflex Sight, Black
- Ultra Shot M-Spec Reflex Sight
- Sights, Electronic & Accessories
- Firearm Accessories
- Ultra Shot M-Spec Reflex Sight
Features:
31. Squirrel Daddy Deluxe 300 Blackout Case Trimming Jig
Accurately holds a .223 /5.56 cartridge for 300 Blackout case trimmingJig conforms to the taper of the cartridge so cuts are precsionConsistent case lengthAdjustable depth stopDeluxe 300 Blackout Case Jig with Removable Clear Plastic Guard
32. Lyman 30M1 Carbine Neck Expanding "M" Die, Gray
- Improves accuracy of cast and jacketed bullet reloads
- Allows the jacketed or cast bullet to be started perfectly centered in the case mouth and properly aligned with the axis of the case neck
- Necessary for cast bullets
- Country of Origin:United States
Features:
33. Little Crow Gunworks Worlds Finest Trimmer 300 B/O
- Works with a cordless or electric drill
- Trims at least 10 cases per minute
- Does not use pilots, the case is supported by the shoulder and case body
Features:
34. Green Blob Outdoors (DARK EARTH) Tactical 1 Inch Cantilever Flat Top Dual Ring Scope Mount for Nikon, Leupold, Vortex, Burris and other optics brand scopes 1" Rifle
35. Nikon P-300 BDC SuperSub Reticle Riflescope, Black, 2-7x32
Features the all-new BDC SuperSub Reticle designed for Subsonic and Supersonic ammunitionMade with Nikon's fully multicoated optics for maximum brightness and light transmissionA quick focus eyepiece allows the shooter to instantly bring the reticle into focusAdjustments are made easy with Spring-Lo...
36. Streamlight 88058 ProTac Rail Mount 1 350 Lumen Professional Tactical Flashlight with High/Low/Strobe use 1x CR123A, 1x AA or 1x AA Li-iON Batteries - 350 Lumens
- Dual fuel operation; uses one AA alkaline or one CR123A battery; can also accept one AA lithium battery
- Features TEN-TAP Programming; Choice of three user selectable programs; High/Strobe; High Only; Low/High
- Remote pressure switch features momentary and "Constant on" operation
- Integrated rail clamp attaches to MIL-STD-1913 rails; Easy to attach with secure mounting
- Includes remote pressure switch, push-button tail switch, remote retaining clips, double-sided tape and zip ties
Features:
Sure, according to my Amazon history it's a Gladiator GAWB04HWEG Adjustable Height Hardwood Workbench, 4' the vise is whatever brand they sell at Lowe's and the light is a Brightech LightView PRO LED.
KAK Micro, if it'll fit inside your handguard:
https://www.kakindustry.com/ar-15-parts/upper-parts/barrels/barrel-parts/flash-hiders-and-muzzle-breaks/5-8-24-threads/kak-industry-micro-slim-flash-can-5-8
Alternatively, I frequently use:
https://www.harborfreight.com/power-tools/cut-off-saws/6-in-55-amp-cut-off-saw-61204.html
along with: https://www.amazon.com/BW-Casey-Aluminum-Black-Touch-Up/dp/B002JCW2CG
some ol stuff like this that I've had for decades
eta I wouldn't use it for anything other than hunting tho, it'd probably melt
Here's a great build here for a 300 Blackout Deer Slayer:
https://i.imgur.com/P0WAkSV.jpg
http://palmettostatearmory.com/psa-ar-15-complete-classic-ept-pistol-lower-no-magazine-black-516445000.html
https://www.amazon.com/Meprolight-Heckler-Night-Sight-green/dp/B00555BTUA
You can buy just the front sight alone as well.
I found those on Amazon. They have several styles to choose from.
Holosun makes some inexpensive but quality red dots.
https://www.amazon.com/HOLOSUN-HS403B-Micro-Sight-Riser/dp/B01BJ3ZXD0
I`v also been using a Sightmark M-Spec.
https://www.amazon.com/Sightmark-Ultra-M-Spec-Reflex-Sight/dp/B00JAE11Z0
Neither are Aimpoint or Eotech, though both offer similar features and quality.
https://www.amazon.com/gp/product/B00S2FWRGK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
literately 2 seconds in google.
https://www.amazon.com/Deluxe-300-Blackout-Case-Trimming/dp/B00H27XAAG
https://www.amazon.com/gp/product/B0063I1FFW/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I got one of these: https://www.amazon.com/Worlds-Finest-Trimmer-300-Blackout/dp/B00BF0J2MG/ref=sr_1_1?ie=UTF8&qid=1491790192&sr=8-1&keywords=WFT+trimmer+300
And just run it at low speed in my drill press. I also run my deburr/chamfer tools in the press. Makes quick business of the task.
Items are not necessarily where I purchased them:
9" SS Barrel w/ 1:7" twist
7" Midwest Industries Gen 3 M-Series
YHM PhantomTi 30 cal
Fostech Echo Binary Trigger Gen2
Spikes Tactical Buffer Tube Assembly Kit with T2 Buffer
Spikes Tactical Calico Jack Lower Reciever (registered SBR)
MAGPUL CTR Buttstock Mil-Spec Diameter
NIBx BCG
Troy Folding Battle Sight
Aimpoint Pro with a Kinetic Development SIDELOK mount
Streamlight Protac 1L
Magpul Grip
Duracoat Tactical White (tactical apparently most flat appearence)
Mostly done. I have to install the dust cover, crush washer, and buy sights.
Parts List
Item | Price | Weight (oz)
---|---|----
upper/lower combo | $81.00 | 22
Barrel | $104 | 16
Tax Stamp | $200 | Soul
gas tube | $9.85 | .9
gas block | $9.95 | 4
UTG super slim 7" rail | $82.16 | 7.6
engraving | $30.00 | -.00005
forward assist | $14.00 | factored into upper
LPK Rock River | $63.00 | factored into upper
MAXIM CQB STOCK | $376.21 | 18.59
bolt carrier | $0 | 11.5
CNC Warrior AK74 Brake | $37.00 | 2?
CNC Warrior 5/8-24 to M24x1.5 Adapter | $19.00 | 1?
AIM Nitrided bolt assembly kit | $55.00 | factored into upper
charging handle | $16.00 | factored into upper
utg single point sling mount | $7.46 | idk
BCM Grip Mod 1 | $28.00 | idk
4mm set screw for brake | $0.62 | negligable
Ejection port cover | $11.00 | factored into upper
magpul moe trigger guard | $8.50 | idk
crush washer | $1.40 | idk
Totals | $1171.15 | 90.39 (5.649375 lb)
The prices factor in S/H
Yes, the RCBS dies will crimp. I personally like to crimp after bullet seating, so I buy an additional die for it. Lee FCD. It's not necessary, just personal preference.
Edit: Just read your question again. No, RCBS does not include a seperate die. Seating die can crimp. Sorry if that was misleading.