Best products from r/Amiibomb
We found 28 comments on r/Amiibomb discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 38 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. 100 Pieces 30 mm Coin Capsules and 5 Sizes (17/20/ 25/27/ 30 mm) Protect Gasket Coin Holder Case with Storage Organizer Box for Coin Collection Supplies (Black) (White)
- Quality coin capsules: made of high-transparent and thickening plastic material, dust-proof and resistance to oxidation; Can hold not bigger than 30 mm coins, commemorative coins
- Crescent opening design: each coin capsule holder has a crescent opening in the outside rim, opening more convenient and effortless
- Good seal: clear coin organizers facilitate to coin storage, view and exchange, the cover and base snap together firmly, dust-proof and antioxidative, protect inside contents safely
- 5 Sizes of eva foam gaskets available: 5 different specifications circle for 17 mm, 20 mm, 25 mm, 27 mm and 30 mm, suit for holding most kinds of coins, easy to separate the foam rings from the eva foam pads based on your coin's size, stop coins from sliding and scratching
- Package content: this coin protector set includes 100 x coin capsule cases, 1 x plastic storage box, and 100 x matching eva foam gaskets, practical gift for coin collectors to store and protect his/ her favorite coins
Features:
2. Adeept Arduino UNO R3 with RC522 RFID Reader Starter Kit with User Manual for Arduino Raspberry Pi
- The Fear & Anxiety Solution: A Breakthrough Process for Healing and Empowerment with Your Subconscious Mind
Features:
3. 30x NTAG215 NFC Sticker Tag - Verified Compatible with Amiibo and Tagmo
- NFC Forum Type 215 Tag (NTAG215)
- 504 bytes of Data
- Compatible with Tagmo Application for Android NFC Enabled Devices
- Same Tags used for Amiibo
Features:
5. Black Lid Capsule Tube & 20 Air-Tite 30mm Black Ring Coin Holders for US Half Dollars
- Capsule Measurements: Inside Diameter 30mm x Depth 3.17mm, Outside Diameter 44.45mm x 5.4mm
- Tube Measurements: 1.75" / 44.45mm I.D. x 5" H (with Cap)
- Genuine Air-Tite Holder Brand Capsules
- Rings are placed inside the capsule
- Coins that Fit: US Half Dollars (Seated, Barber, Walking Liberty, Franklin and Kennedy), 1oz Platinum Maple Leaf, and 1oz Gold Maple Leaf
Features:
6. CADY Crafts Punch 1-Inch Paper Punches (Circle)
- 1.Spring-action lever makes the punch easier and more comfortable to use and gentle your hands.
- 2.Create stencil shapes, die-cuts, and templates for all of crafting; Use with other nesting punches to create perfectly graduating layers; Punches cleanly every time for consistently great designs.
- 3.Material: Plastic; Craft punch size: 7*5.5*5cm; Punch out size: 2.5cm; Color: Randomly
- 4.It is simple to use and will make crisp, perfectly shaped designs from card-stock, paper, cardboard, felt, foam, and much more; Use both the punched out shape and the punched paper as mats and frames for your designs.
- 5.specially designed punches are ideal to features lovely embossed patterns with interior cutouts and offer creative versatility; Perfect for kids' DIY artwork, gift wrapping, envelopes, memory books, greeting cards, gift tags, scrapbooks, cards, decorations and any paper craft.
Features:
7. POKONBOY 288 Pockets Trading Card Storage Album Pages Card Collector Coin Holders Wallets Sleeves Card Binder Set Perfect for Skylanders, Pokemon, Top Trumps
Package included: Total 288 pockets of 32 pages ( 9 pockets per page) with the size: 3.6*2.75inches.Material: Made of clear polypropylene, durable quality, Acid Free, waterproof, super sturdy not easy to break, good to protect your card from fading and stain.Convenient: Transparent plastic is more c...
8. GreatestDeals (11x - 100x) NTAG215 NTAG 215 25mm NFC Stickers 100% Guaranteed to Work Perfectly with TagMo (Android) and Placiibo (iOS)! Multiple Sizes Available! (50 Stickers)
Highest Rated and Quality NTAG215 NFC Tags on Amazon!! - 100% Guaranteed to work with TagMo and Amiibo Cards. NTAG215 NFC Sticker Pack ships blank ready to program!We stand by our product 100%! If for any reason your tag does not work, has an error, or becomes damaged, contact us immediately for a f...
9. Hicarer Coin Capsules Round Plastic Coin Holder Case with Storage Organizer Box for Coin Collection Supplies (30 mm, 100 Pieces)
Measurements (diameter x depth): clear round coin holder inside size is 30 x 3 mm, outside size is 33 x 5. 6 mm; Can hold not bigger than 30 mm coins, commemorative coinsMaterial: made of thickened plastic, durable coin capsules; Feature: safety round corner design, smooth to touch and hold; High tr...
10. Canon Office and Business MX922 All-In-One Printer, Wireless and mobile printing
- Features: Wireless LAN, AirPrint, Google Cloud Print, Wireless, Printing, Mobile Device Printing, USB 2.0 Hi Speed: Plug the cable into your PC for a super fast connection for your data transfers
- Fully-Integrated, 35-sheet Duplex Auto Document Feeder: Easily copy, scan and fax multiple documents without having to load them one page at a time
- Built-In Auto Duplex Printing: Automatically print on both sides of the page without the hassle of turning it over manually
- Compatible with Individual/Combo CLI-251 XL Ink Tanks (Cyan, Magenta, Yellow, Black) & PGI-250 XL Or PGI-255 XXL Pigment Black Ink Tanks.
- 20-Foot cord.OS Compatibility:Windows 8, Windows RT, Windows 7, Windows 7 SP1, Windows Vista SP1, Vista SP2, Windows XP SP3 32-bit and Mac OSX 10.6.8 - 10.9.x
- Dimension (W x D x H) : 19.4 (W) x 15.6 (D) x 9.1 (H). Weight : 25.7 pounds
Features:
11. Inkjet PVC Card Tray for Canon J Tray Printers - Canon PIXMA MX922, MG7720, MG5420, MG7120, iP7230, and More
- Replaces Canon J Tray CD/DVD Tray Enabling You To Print on Inkjet PVC Cards
- Create beautiful, high quality PVC cards without the need to purchase expensive thermal card printers (such as Fargo, Evolis, Zebra, DataCard, etc)
- Holds 2 Inkjet PVC Cards - Print 2 cards at a time. (Always place 2 cards in the tray when printing)
- Inkjet PVC Cards Sold Separately
- Works with Canon PIXMA MX922, MG7720, MG5420, MG7120, iP7230, and more. See Description for full list.
Features:
12. Inkjet PVC Cards with NFC Chip (NTAG215) - Brainstorm ID's Enhanced Ink Receptive Coating, Waterproof & Double Sided Printing, Epson & Canon Inkjet Printers (50 Inkjet Printable ID Cards)
- 50 Authentic Brainstorm ID Inkjet PVC Cards with NTAG215 NFC Chip (13.56MHz, 144 bytes) - The Absolute Best Available, Guaranteed
- Brainstorm ID Inkjet PVC Cards use our proprietary ink receptive coating to ensure ink sets fast, and for good. Don't waste time and money on inferior technology.
- Standard Credit Card Size (CR80) and Thickness (3.375" x 2.125", 30 mil thick)
- BOTH sides can be printed on. Using our downloadable templates allows you to print edge to edge (full bleed).
- NOT FOR USE IN PVC CARD PRINTERS: Only for use with Inkjet Printers - These cards are not meant for use in normal thermal ID card printers
Features:
13. FONGWAH Ntag215 White PVC Blank Amiibo Cards 40x Cards (TagMo Compatible) can be Used for amiibos Games and Also Compatible with All NFC-Enabled Sm (40)
- 【Reliability and Stability】FONGWAH NTAG215 card adopts original NXP chips; Support to read/write/rewrite, and cannot be edited or reset after being set as read-only. Amiibo can only be edited once.
- 【Security】Field programmable read-only locking function, 32-bit password protection to prevent unauthorized memory operations
- 【Specifications】Quantity: 40 pcs/pack , Size: 3.375" x 2.125" (85.6 mm x 53.98 mm) Reading distance: 0-5 cm (determined by the induction power), 13.56Mhz, ISO1443A Standard Compliance
- 【Perfect support for Amiibos】FONGWAH NTAG215 cards can be used as amiibo cards and work with NFC-embeded devices to make Animal Crossing amiibos, also for Nintendo Amiibo to unlock cool stuff for BotW and Odyssey etc. Note: Not necessarily suitable for all IOS mobile phones.
- 【Worry-free purchase】If you encounter any card product quality problems or non-artificial damage, please contact us for free replacement for you.
Features:
14. Fiskars 152490-1004 SureCut Deluxe Craft Paper Trimmer, 12 Inch
- Quality Tools for Arts and Crafts: From scissors and cutting mats, to rotary and paper cutters, to quilting and scrapbooking supplies, Fiskars crafting tools are designed to help you do what you do best: express yourself.
- Precision for every project: SureCut wire cut-line makes it easy to see where the blade will cut your paper, photo, or scrapbook pages. TripleTrack System interlocks the blade and rail for straight, precise cuts. Scale and grid cutting mat helps ensure cutting accuracy.
- Portable and Powerful: High-profile blade carriage is ergonomically designed and easier to grip than other paper trimmers to help you make accurate cuts quickly; Lightweight design with rubberized feet to provide stability.
- Versatile paper trimmer: Cut lightweight materials like photos and cardstock or thick materials like balsa and corkboard when doing arts and crafts for adults or kids. Great addition to your scrapbooking supplies and stationary projects!
- Includes 1 Fiskars 12” SureCut Deluxe Craft Paper Trimmer with wide 6 ¼” base. Self-leveling swing-out arm extends measuring deck to over 15". Works with high or low profile TripleTrack blades, style I. Backed by a full lifetime warranty.
Features:
15. Nintendo NFC Reader/Writer Accessory - Nintendo 3DS
Tap any amiibo accessory to the near-field communication (NFC) reader on your Wii U GamePad controller to score all kinds of bonuses in compatible gamesThe New Nintendo 3DS XL comes with built-in amiibo support. Just tap an amiibo to the NFC reader on the lower screen and goYou can also use amiibo w...
16. Herma 4387 Removable Labels A4 Ø 30 Mm Round White Movables/Removable Paper Matt 1200 Pcs.
- Removable Labels A4, Ø 30 mm, White, movable technology
- Easily removable without leaving traces of adhesive: Ideal for temporary or frequent-change labels and for delicate surfaces
- Problem-free repositioning, reliable adhesion even when affixed several times
- Suitable for inkjet printers, laser printers and copiers, perfect printing results in black-and-white or colour
- Design your labels professionally and for free with our Online software and practical templates. Visit herma /free-software
Features:
17. Aneco 100 Pieces Plastic Coin Holder Capsules Container with Storage Organiz Box and Foam Gasket for Coin Collection, 3 Sizes(25mm/27mm/30mm)
- Coin collection storage box: made of clear plastic to hold 100 pieces of plastic coin case capsules, and the storage box size is approx. 7.1 x 4.7 x 1.6 inches(L*W*H), great for protecting your coin case capsules, keep them sorted and organized.
- 30mm clear coin capsule holders: made of good quality transparent plastic material,smooth to touch, crystal clear coin capsules holders for you easy to look at inside coins clearly and display them, and the diameter is 30mm.
- Ingenious opening design: Each coin capsule holder has a small part of groove in the outside rim, so you can open the coin capsule holders easily and conveniently with your hand. The base and the lid snap together tightly to protect inside contents safely.
- With 100 matching eva foam gaskets: with the precut eva foam rings, 27mm and 25mm in diameter, you also can trim them if your items’ diameter is less than 25mm, easy to separate the foam rings from the eva foam pads based on your coin’s size, help hold the coins in place, stop them from sliding and scratching.
- Quantity: One package includes 100 pieces of round clear plastic coin capsules holders,100 pieces of matching eva foam gaskets and 1 clear plastic storage container.
Features:
18. (25) Air-tite H-32 Direct Fit Coin Holder Capsules for 1oz American Gold Eagles and 1oz Gold Krugerrands & Kangaroos
Measurements: Inside Diameter 32.7mm x Depth 3.17mm, Outside Diameter 44.45mm x 5.4mmGenuine Air-Tite Holder Brand CapsulesCapsules are shipped Un-Assembled between layers of foamCoins that Fit: 1oz Gold Eagles $50, 1oz Gold Buffalo, 1oz $100 Platinum Eagle, US Half Dollars (1794-1836), 1/2oz Silver...
19. EK Tools Circle Punch, 2-Inch
- Easy to use and lock closed for simple and safe storage
- Constructed of steel and plastic and measure 3x5x1/2 inches
- Approximate size of punched piece is 2 inches
- Use cardstock or other materials that are 180gsm or lower
- Punch through a few pieces of aluminum foil to sharpen the blade.
Features:
I’d like to thank this sub for all their ideas! I started my amiibo creation journey with a simple sticker attached to a rubber duck for Epona; when I saw my best man’s amazement when I showed him, I knew exactly what I needed to do for his best man gift.
I started by attempting to have a playing card company print some of the amazing card designs found on this sub. After being rejected for copyright because of the amiibo logo, I edited it out (as that’s where I was planning to place the sticker); they then told me the entire set was not going to be able to be made, which sent me into a minor panic. I switched up tactics and went to making coins.
Since there are so many varieties of coin sizes, I was a bit overwhelmed compared to the stock PVC or playing card sizes. After doing some research, I decided on the AIRTITE 30mm black ring coin holders. This was because the inner diameter is 1.55 inches, and I bought a 1.5-inch hole punch for the smallest amount of wiggle room.
I went for a cleaner look (just image of amiibo) which are downloadable from Nintendo’s amiibo lineup website. I wanted the black ring to be shown on the amiibo side but not the back, so I sized them all to fit within a 1.2-inch circle in word, centered within a 1.6-inch circle. I removed the inner guide circle and copied it into GIMP, a free open source program. This is my first time using it, but the best way I found was to paste each image in as a new layer, transform it to the proper size, and move it into place. (I'm sure there are better ways; this was all trial and error).
It is a destination beach wedding, so I found an appropriate Zelda image that wouldn’t look bad in a smaller size or where too much is cut off because of the circular design. The font is a free download, Hylia Serif. I messed up and sized the image to 1.5 inches, not 1.55 (hence the small gaps at the top and bottom). I printed them at home on glossy photo paper using an inkjet printer.
Assembly went bottom coin holder-back image-NFC tag-amiibo image-black foam ring-top coin holder. I added the black ring to center the 25mm sticker, then removed temporarily in order it to put the other image underneath the ring. While it is possible to reopen them, it is very tedious, and I strongly encourage double checking before closing (don’t forget a sticker like I did…). You can program them after you assemble them without any issues.
This is probably too much detail, but a lot of posts show amazing results and I knew I felt unsure of things many times before I ironed everything out. Hopefully this can make creating your own more accessible for future first timers! I’m going to work on cleaning up my coin pdfs but will post them soon! It’s a total of 36 coins (Zelda, Splatoon, and wedding Mario, naturally).
TL;DR:
Materials: AIRTITE 30mm black ring AIRTITE coin holders; 25mm NFC Stickers; 1.5 inch hole punch
Links:
https://www.gimp.org/
https://smile.amazon.com/NTAG215-NFC-Stickers-Guaranteed-Perfectly/dp/B071ZZTT6T/
https://smile.amazon.com/Black-Capsule-Air-Tite-Holders-Dollars/dp/B01EP1YREY/
https://smile.amazon.com/EK-Tools-Circle-1-50-Inch-Package/dp/B0090JVGFU/
https://www.nintendo.com/amiibo/line-up
http://artsyomni.com/hyliaserif
Started creating my own Amiibo coins thanks to some inspiration gained from seeing the work of a few of you on this server. Figured I'd share what I've created thus far in case anyone is interested! Here’s a link to the PSD template. Please forgive the fact that the Super Smash Amiibos aren't all grouped together because I started just creating the BOTW-compatible Amiibos first, then decided to keep going :P
The coins are 1" in diameter. Used a 1” circle punch to cut them out and housed them inside 30mm coin capsules with the included fitted foam inserts. Going to color code the rim of the foam so that I can easily identify the Amiibo series when they're in the case.
Have some 1” plastic counters on the way to provide some rigidity to the images and "fill out" the capsule a little better. Excited to get it all finished up so they can be put to good use!
Being the cheap ass I am, I went looking for a better deal on coin cases...I found this:https://www.amazon.com/gp/product/B07CNDTYC6/ref=ox_sc_act_title_1?smid=AI5NMG8XBYKC1&psc=1
I will let you know if the 30MM works out, and if the cases are any good once I get them. I like that the foam comes in multiple sizes. I only have a B/W printer, so that will have to do...It won't do the art justice, but it's better than what I have now.
And thanks for the awesome guide! Coin cases are a great idea I never would have thought of!
Monster Binder - 4 Pocket Trading Card Album - Matte Red - Holds 160 Yugioh, Magic, and Pokemon Cards https://www.amazon.com/dp/B00A3MYU4C/ref=cm_sw_r_cp_apa_i_ahzFDb5NYD5FZ
I personally use one of these with cards instead of the circles and they fit perfectly. But if you want cheaper
POKONBOY 288 Pockets Trading Card Storage Album Pages Card Collector Coin Holders Wallets Sleeves Card Binder Set Perfect for Skylanders, Pokemon, Top Trumps https://www.amazon.com/dp/B07SXFFKGY/ref=cm_sw_r_cp_apa_i_fjzFDbZ72K5SB
Those plus any random 3 ring binder would work well and would store WAY more cards.
I personally like the monster binder because you load the card in the sleeve from the side instead of the top so there's no chance of them falling out really if you're walking with it in your hands.
Ill give you the rundown on what I did for mine:
new folders in the root called "Amiibo Keys" and "Amiibo .bin Dump"
Select your Arduino Model. Mine was "Uno (R3)"
Your board is now ready to start creating amiibos, now you just need to get the bin file of any amiibo you want, I recommend downloading them from here.
I'll try and answer all your questions, via this entire thread, in this one post. And maybe give some extra info? I don't, this might turn into a wall of text. I'll do my best to not do that.
I own pretty much every possible way to make spoofed amiibos. From cards, to coins, to the PowerSaves (find it at GameStops), and also the N2 Elite.
Cheaper Alternatives?
The PC program vs phone for the n2 is just... I can load the n2 much faster with the PC. I can make a list, and it is loaded in just seconds. With my phone, I have to add one at a time, navigating to the bins each time. Takes to long. I only use my phone to add 1, when checking bins.
You asked if there was a battery in the n2. There is not from what I can remember when mine fell apart. Just like there is no battery in amiibos. How does it know what one to be on? Don't know, that is the magic of the N2.
Buy it off Wish? That is a big dice roll. If you do, let us know how it works out. I'd not take the chance. There isn't much inside the puk, so you saving a ton of money might just end with you getting an empty puk :3
What should you really do? If you are asking us...well... do you have an android phone that can write NFC? If so, I'd go with making NFC stickers. Get as many stickers as you will need (I have bought these exact ones, from this seller, many times now) and get this coin saver and case . I have an entire set where I zapped the sticker, stuck in inside the coin, and just wrote what it was on the blank side. The added case keeps them in check.
I use my N2 now just to check bins (as I said), if it works right, I make a coin.
Back when I played Zelda, I used the N2 a lot more, because you can also create copies of amiibos, that the game would read each use. So ... I did at one time have 200 "different" Guardian amiibos to gain a toooooooon of arrows :P
If you have more questions, asks. I'll do my best.
a little late, but certain inkjet printers can print pvc cards with special adapters. you'll need pvc cards designed special for inkjet printers.
 
for example:
https://www.amazon.com/gp/product/B00AVWKUJS
with
https://www.amazon.com/gp/product/B00P25H0BA
and
https://www.amazon.com/gp/product/B072FK4RZD
Amazon would probably be your best bet right now. My favorite one is this one.
To further save you from future heartache, I strongly suggest something like this. There are cheaper varieties, but this happens to be the one I have kicking around thanks to a crafty wife.
I don’t believe that reader/writer has any supported amiibo software available. If you are going the PC route, you need to use this kit from amazon or source those components separately.
There is an amiibomb writeup with software links in the sub here if you search a little, which will help guide you thru assembly of the writer, installation of the software and a basic guide to reading and writing cards/tags.
This is cool, could you possibly export the images in PNG, I don't have Photoshop, I personally was doing something similar, but i've used these
https://www.amazon.co.uk/gp/product/B000KJREUU
so printed Stickers then stuck them onto each side of the foam disk you get included with these.
https://www.amazon.co.uk/gp/product/B079FMZSHC
the foam disks with centre intact are about 30mm exactly
this means it pretty much a flush as the foam fills the case, hadn't thought to use a Sharpie or something to colour the edges yet. and the images i used are nowhere near as good as yours
Ahh okay thank you, did you make a final template for the 22 Zelda figures? I see all the raw images for it but I don't see them with their backdrops etc. also to others I noticed Amazon has them for $12.50 2 day shipping if you have prime for 25 of them slightly cheaper and much faster than the eBay link seems to be same sellers?https://www.amazon.com/Air-tite-Capsules-American-Krugerrands-Kangaroos/dp/B00LSZMD74/ref=sr_1_3?ie=UTF8&qid=1523060812&sr=8-3&keywords=Coin+Holder+32mm
IDK what size you're punching them, but you can get a pog-sized one pretty cheap (although like I said reviews say these crap out quickly.)
They are cheaper on Amazon.
https://www.amazon.com/NTAG215-NFC-Stickers-Guaranteed-Perfectly/dp/B071ZZTT6T/ref=mp_s_a_1_3?keywords=nfc+215+stickers&qid=1569471327&sprefix=nfc+215+sticker&sr=8-3
Sand__Panda and I both use the same cases and thoughts, I don't see why 40mm should be any different. These are the cases I got
I used these and they're batting a thousand right now, as none have failed or had an error.
https://www.amazon.com/gp/aw/d/B071ZZTT6T?psc=1&ref=ppx_pop_mob_b_asin_title