Best products from r/BHOInfo
We found 13 comments on r/BHOInfo discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 11 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. FJC (6909) 3.0 CFM Vacuum Pump
- Single stage pump using Twin Port Technology for performance like a 2 stage performance
- 1/2" ACME x 1/4" MFL inlet fitting.
- Motor: 115 Volt
- Lightweight, durable construction for easy handling and long-life use.
Features:
2. Robinair (15500) VacuMaster Economy Vacuum Pump - 2-Stage, 5 CFM
Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service; featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet5 CFM free air displacement; factory rated to 35 microns1/3 HP, 115V/60 Hz thermally protected motorFeatures an inlet...
3. Robinair (15300) VacuMaster Economy Vacuum Pump - 2-Stage, 3 CFM
- Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service, featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet
- 3 CFM free air displacement; factory rated to 35 microns
- 1/3 HP, 115V/60Hz thermally protected motor
- Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life
- 1/4 and 3/8 inch MFL inlet fittings, 3/8 inch FFL x 1/2 inch ACME adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining
Features:
4. 420 Scope 60-75x LED Handheld Microscope
420 scopehandheld microscopeportable microscopemini microscope420
5. Oil Slick Sheet Labratory Grade PTFE Roll Solvent Resistant Alternative to Parchment Paper, 48x16"
- A disposable alternative to parchment paper; the Slick Sheet is a laboratory grade PTFE film. Slick Sheet is 100% Resistant to Non-Polar Solvents and rated for direct, long term, solvent exposure. Slick Sheet is an ideal liner for collection vessels and evaporation dishes and has excellent heat transfer up to 500°F.
- Drip mat for Botanical Extraction , Other uses for Slick Sheet are: Packaging for sticky extracts, Liner for various extraction apparatus, Vacuum chamber inserts, Non-stick sleeves for glass on glass joints, Use whenever an ultra glossy appearance is desired
- Helpful Hints: Feel free to cut, fold, score and re-use the Slick Sheet. However, repeated folding and creasing can wrinkle the surface and impact non-stick performance over time. Sharp tools are not recommended for use with the Slick Sheet. For a pristine result, inspect your Slick Sheet for airborne debris before each use. DO NOT OVERHEAT. Heat in excess of 500°F may damage the Slick Sheet.
Features:
6. ABLAZE Mini Closed Loop Extractor with Splatter Platter and Sight Window
45g Capacity , Designed For Small WorkTwo Glass Sight And Splatter Platter IncludedPre-Set Device,Instant UseSystem Rated to 100PSIReturn wrong Item will be reported
7. (2 DOZEN) 5x Power Butane Super Refined Fuel Gas 300 Ml (24 Cans)
- Ultra refine butnae
Features:
8. Blazer GT8000 Big Shot Butane Torch
- Anti-flare, brass-frame nozzle, for safety and flame control
- Attachable tabletop base, for hands-free use
- Gas-flow adjustment dial, to control flame length
- Piezoelectric ignition system, requires no electrical connection
- 2,500-degree F, torch flame, for a more precise flame tip
- Treat your torch as you would any fine instrument. Do not drop or otherwise abuse
Features:
9. AGPtek Digital All-purpose Temperature Controller STC-1000 w/Sensor
Switch the modes between cool and heatControl temperature by setting the temperature setting value and the difference valueTemperature calibrationRefrigerating control output delay protectionAlarm when temperature exceeds temperature limit or when sensor error.
10. Robinair (15115) VacuMaster Single Stage Vacuum Pump - Single-Stage, 1.5 CFM
- Robinair's VacuMaster Single-Stage Vacuum Pump is designed for air conditioning and refrigeration service; featuring a single stage rotary vane design, 10 ounce oil capacity, and non-skid feet
- 1.5 CFM free air displacement; factory rated to 115 microns
- 1/5 HP thermally protected motor; 110V, 60 Hz
- Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life
- 1/4 inch flare and 1/2 inch ACME inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir
Features:
11. Anderson Metals Brass Hose Fitting, Connector, 3/8" Barb x 3/8" Female Pipe
- Adapter for connecting pipes or fittings of different types
- Fitting connects to hose on one end and has an NPT female connector on the other
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)
- For use with plastic or rubber hose
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Features:
These are much nicer tubes for about the same price. They come with a three pack of micron screens and a clamp. The one you linked to those are all extra.
I would not get anything cheaper or smaller than the provac you linked to. It's a great starter chamber and a good value.
That pump is not ideal. It is rated at 500u. Not enough for proper extracts. You really don't want to skimp out on the vac. It's extremely important to ensure properly purged oil. IMHO the minimum you want to be looking at is the Robinair 15300 but if it were me I'd spend a couple extra bucks and get the Robinair 15500. I own the 15550 and it works great! It's also probably the best value on the market right now at the price amazon is selling them.
I'd also advise picking up a roll of Oil Slick Sheet. You can blast right on to it. It works well for small runs.
As far as your tek, watch this video and do it just like shown and you'll be golden!
How did you come to that conclusion? Did you put it under a microscope? Was there no smell on the material pre-blast? Smell would be a major indicator to me, I mean terpenes are boiling off at room temp and you get smell, no terps =nothing to extract.
A buddy of mine suggested picking up one of these to inspect material before bringing it home to run, haven't done it yet but it seems like a good idea.
chamber
pump This works for me but honestly you'll want to get a two stage pump as mentioned in the below article.
Useful reading
I've read that post by GreyWolf, I'm fully aware of the Silicone in the Oil Slick Pad. In his BHO Extraction article he lists Polytetrafluorethylene as an acceptable material. I use pyrex, I'm just trying to clarify for you.
This is the product I'm talking about. Teflon is made from PTFE.
PTFE is also safe for Butane exposure: source
$480 total both in Amazon. It’s 45g capacity
ABLAZE Mini Closed Loop Extractor with Splatter Platter and Sight Window https://www.amazon.com/dp/B01G9ZJ1VS/ref=cm_sw_r_cp_api_i_ZKQhDbC28V5JQ
http://www.amazon.com/DOZEN-Power-Butane-Super-Refined/dp/B008AMG84M/ref=pd_sbs_sg_1?ie=UTF8&refRID=1B0KTSD5HG836FV9MHSF
i bought the 12-pack version of this and was not disappointed
http://www.amazon.com/Slick-Sheet-Ptfe-Teflon-Roll/dp/B00AWK04IQ/ref=pd_sim_k_6?ie=UTF8&refRID=0XA3A85D338Y6D3D80QP
I have some cheaper temp controllers I have used for brewing beer, I wonder if these would work? They are accurate down to the degree.
http://www.amazon.com/AGPtek-All-purpose-Temperature-Controller-STC-1000/dp/B00862G3TQ
http://www.amazon.com/Blazer-GT8000-Shot-Butane-Torch/dp/B000NCZU0A
I've seen a guy use a pressure cooker bottom he got from a thrift store for $3.50. He drilled a hole into the side and epoxied a copper tube to hook to the vacuum. He went to a plastics place and ordered a 3/4" thick acrylic circle that covers the top of the pressure cooker. I think that cost $30. He said he wiped dish soap on one side of the acrylic and let it dry. Then he placed the acrylic on a bead of silicone aquarium goop around the rim of the pressure cooker. The soap allowed him to peel the acrylic plate off the silicone after it hardened.
Anyway, he sprays into a pyrex bowl that fits nicely in the vacuum chamber. Once the obvious butane has boiled off, (he leaves it overnight), he covers the top with the acrylic and purges, using a single-vane vacuum pump. Total cost was about $115.
Anderson Metals Brass Compression Hose Fitting, Connector, Barb x NPT Female
http://amzn.com/B003CEN5BW
Not sure your size exactly it this should point you in the right direction.