Best products from r/BloodAngels
We found 12 comments on r/BloodAngels discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 10 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. EDGELEC 20pcs Prewired 0402 Green SMD LED Light Emitting Diode DC 3V Micro Litz Length 7.8in. (20cm) Soldered Mini LED Lights for DIY Manual Model Toy Decoration
- 0402 SMD LED Pre Wired/ LED Color: Green / DC 3V / IF=20 mA
- Wavelength: 520-530nm / Luminance intensity: 350 mcd / 120° Viewing Angle
- 0402 LED (0.04×0.02×0.017 in.) / ⌀0.01 in. Ultra slim isolated wires / Lead wires length: 7.8 in.
- Positive Pole: Red Wire / Negative Pole: Black Wire
Features:
2. Sakura Pigma Micron 005 - Pigment Fineliners - 0.2mm - Black [Pack of 3]
Pigma Fineliner Pen from Sakura Black Ink - Pack of 3The durable 0.05mm porous-point nib delivers a consistent line as well as superb colour transferal.Sakura's unique PIGMA Ink is the first in the world to combine both water-based and pigment inks, making for vibrant colours that will not bleed thr...
3. Pin Vise Hand Drill with Twist Drill Bits 31 Pack
☆ SIZE: 1 piece mini pin vise. 30 pieces twist drill bits 0.5/0.6/0.7/0.8/0.9mm (3 pieces for each size); 1.0/1.2/1.4/1.6/1.8mm (2 pieces for each size); 2.0/2.3/2.5/2.8/3.0mm (1 pieces for each size). Complete size pin vice drill kit can meet your different needs.☆ HIGH QUALITY: This adjustable...
4. Minwax 255554444 Minwaxc Polycrylic Water Based Protective Finishes, 1/2 Pint, Gloss
Protects and adds beauty to interior wood surfaces including woodwork, furniture, doors and cabinetsCrystal clear finish is ideal for use over light woods like maple, ash and birch as well as over Minwax Water-Based Wood StainsUltra fast-drying formula allows for quick recoats in 2 hoursWater-based ...
6. Tamiya 74112 Fine Pin Vise D-R (0.1-3.2mm)
- Compatible with drill bits of sizes from 0.1-3.2mm.
- Rotating grip end features built-in ball bearings for smooth movement.
- Made from nickel-plated brass, with elastomer grip.
Features:
7. Modelcraft Pin Vice Double Ended Swivel Top (0 - 2.9mm) - PPV2237
For drills, taps, pins etc.2 reversible collets: 0 to 1.2mm & 1.3 to 2.4mm + 0.8 to 2.0mm & 1.8 to 2.9mmSwivel head for comfort & efficiencyDistributed by a UK SellerGreat Product for Every Modeller
8. Iwata-Medea Eclipse HP CS Dual Action Airbrush Gun / Gravity Feed
- Features a 0.35mm needle and drop-in self-centering nozzle combination comes with a large 1/3 oz gravity-feed cup
- Generous 1/3 oz sized cup is designed with a new funnel shape, which makes for easy clean up and more efficient paint flow
- The Eclipse CS sprays heavier acrylics and Medea Textile Colors, while maintaining high-detail spray characteristics
- Single cut-away handle
- Spray pattern - hairline to 2" (50-mm) round
Features:
9. Master Airbrush Premium 10 Foot Nylon Braided Airbrush Hose with Standard 1/8" Size Fittings on Both Ends (Hose color may vary)
- Master Airbrush Brand Premium 10 Foot Nylon Braided Airbrush Hose
- Fits Iwata, Devilbiss and Master Airbrush Brands, as well as many other popular brands
- Genuine Master Airbrush Brand Quality Hose
- Connections: Both 1/8 BSP Female
- Length: 10 feet; Material: Nylon Braided Hose
Features:
10. Master Airbrush TC-20T Airbrush Compressor with Air Storage Tank, Water Trap and Regulator
- Quiet 1/5 hp AIRBRUSH COMPRESSOR Air Tank-2 Yr Warranty
- High Performance Airbrush Compressor with Tank
- Provides "Air-On-Demand" with Constant Pressure and Zero Pulsation
- 1/5 Horsepower this unit delivers more Air Volume (CFM) and Air Pressure (PSI)
- Our Most Popular Airbrush Compressor!
Features:
I’m not in the UK but I bought this off amazon and it’s great.
Pin Vise Hand Drill with Twist Drill Bits 31 Pack https://www.amazon.com/dp/B07CTHCJPM/ref=cm_sw_r_sms_c_api_i_ZFzWDb1MC64RZ
Also these are what I use for script and you can use them for pupils if you don’t want to darken the eyes down.
Sakura Pigma Micron 005 - Pigment Fineliners - 0.2mm - Black [Pack of 3] https://www.amazon.com/dp/B01FYDJWTC/ref=cm_sw_r_sms_c_api_i_vJzWDbYBZRK71
https://www.amazon.com/Minwax-255554444-Polycrylic-Protective-Finishes/dp/B000BZZ3S8/ref=sr_1_2?keywords=polyurethane&qid=1572928603&sr=8-2
Get a brush you don't care about, do 2-3 layers on the parts where its super obvious. Between that and judicious filing you can get areas like the legs looking a lot more natural.
Just yesterday I ordered this drill bit set.
https://www.amazon.com/gp/product/B000BQWM0E/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I comes a 1mm, 1.5mm, 2mm, 2.5mm, and 3mm drill bit. Perfect for all your barrel drilling and smaller (think infantry) magnetization needs.
I also picked up one of these to drive them.
https://www.amazon.com/gp/product/B00EEOD03C/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
The LED i used are these https://www.amazon.com/gp/product/B07FN8CSS5/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
​
No tutorial, the helmet is a 3d printed in clear pla. Then you just have to use a pen drill. Go though the torso and down a leg before you glue everything together.
​
The current plan is a custom base to fit a battery/switch in the base. It's gonna have to be a bit taller to accommodate it all.
Airbrush: https://www.amazon.com/Iwata-Medea-Eclipse-Action-Airbrush-Gravity/dp/B000BQKFAI/ref=sr_1_3?ie=UTF8&qid=1520896361&sr=8-3&keywords=iwata+eclipse+hp-cs
Compressor: https://www.amazon.com/gp/product/B0038D38AA/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Hose: https://www.amazon.com/gp/product/B002FDX36I/ref=oh_aui_detailpage_o02_s02?ie=UTF8&psc=1
These are all that I use and have been nothing but happy with them. I'm one of those with the mindset that if I'm going to invest, I'm going to invest - and the Iwata Eclipse is praised far and wide as one of, if not the, best airbrush out there.
They aren't much, I got this one https://www.amazon.co.uk/Modelcraft-Vice-Double-Ended-Swivel/dp/B0041NX1E4. Need to get some drill bits as well.