Best products from r/Buick

We found 14 comments on r/Buick discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 11 products and ranked them based on the amount of positive reactions they received. Here are the top 20.

8. VIKEWE Upgraded Dash Cam Hardwire Kit, 13ft Cable with Mini and Micro USB Port for Dash Camera, Battery Drain Protection, 12V-24V to 5V Car Charger Power Cord with 5 Fuse Kit and Installation Tool

    Features:
  • ❖【Wide Compatibility & 2 Types Port】Our dash cam hardwire kit directly connects the dash camera, GPS navigator or radar detector etc to the car, bus, SUV and most car models. With 2 types port, suitable for different needs at different dash cams and car charger
  • ❖【Built-in Smart Device】This hardwire kit with over-heat, over-current and low voltage protection function, it can protect your car's battery when vehicle battery voltage was drops to 11.6V (12V input) or 23.2V (24V input), the control box will cut off the power, which leaves you with enough power to ignite the engine, and will not damage the battery
  • ❖【24 Hours Surveillance】The upgrade hardwire kit connects to car battery or fuse box power, can uninterruptedly supply power for device 7*24. It can keep powered on even car turned off
  • ❖【Easy Installation】No need to occupy the car cigarette lighter, just have the vehicle hardwire kit connected to car battery or fuse box power port, route the wire to the device position. Within minutes, you could finish the installation with little or no expertise required ( Installing Crowbar / Cable clips x 15 include)
  • ❖【Perfect Parameter】With about 13ft (4 m) length of Cable / mini USB & micro USB port. Input voltage: 12V-24V Output: 5V/2A (Anti-Interfere Magnetic Ring included - Avoid your car radio will be interfered )
VIKEWE Upgraded Dash Cam Hardwire Kit, 13ft Cable with Mini and Micro USB Port for Dash Camera, Battery Drain Protection, 12V-24V to 5V Car Charger Power Cord with 5 Fuse Kit and Installation Tool
▼ Read Reddit mentions

9. Autel AutoLink AL319 OBD2 Scanner Automotive Engine Fault Code Reader CAN Scan Tool

    Features:
  • 【TURN OFF CEL】 This AL319 car diagnostic tool supports Reading DTCs, displaying Live Data, Freeze Frame & I/M Readiness etc to figure out the root cause of the Check Engine Light (CEL) and turning it off, to help you detect any potential problems, and to avoid excessive costs for unnecessary repairs.
  • 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners.
  • 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
  • 【USER-FRIENDLY DESIGN】 This check engine code reader features a patented One-Click I/M Readiness Key, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
  • 【HIGH-QUALITY SERVICES】 12 months warranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
Autel AutoLink AL319 OBD2 Scanner Automotive Engine Fault Code Reader CAN Scan Tool
▼ Read Reddit mentions

Top comments mentioning products on r/Buick:

u/hydrochloriic · 2 pointsr/Buick

I’m not familiar with that specific junction, but I’ve made a lot of various intake setups over the years, including forced induction ones. Silicone couplers and worm gear (or ideally constant tension) clamps usually do the job.

However, while one would definitely fit onto the throttle body, I’m not sure what the tube going to the throttle body looks like, and so whether one could be put on there. Do you have photo?

EDIT: Possibly this part is a direct replacement? Again, not familiar with that engine specifically.

u/tracejm · 3 pointsr/Buick

Sure. It's this one.

TSI 80115 Black Mini Clutter Catcher
https://www.amazon.com/dp/B00AV3WVDA?ref=ppx_pop_mob_ap_share

I didn't really know for sure if it would work but it came out well. Just had to cut into the back of it - it was an easy cut, really, because the last compartment is about two inches deep and that's almost exactly what needs to come off to make it fit.

u/Aaronqwerty · 1 pointr/Buick

Here, are, some, ideas. There is a lot of good stuff on ebay too.

u/deekster_caddy · 1 pointr/Buick

Well it's not that bad. If you GM is the kind that requires the 'activation tool' this is the tool that will activate the sensors once you have the vehicle in 'learn mode' (see your owners manual, you might be able to get to this mode yourself)

https://www.amazon.com/VXDAS-EL-50448-Pressure-Monitor-Activation/dp/B072BK693N/

and if you get into it hardcore, one of these will do most of what any tire shop needs to do:

https://www.amazon.com/Autel-TS501-Activation-Diagnostic-Professional/dp/B01LRJ7UD2/

u/fourNtwentyz · 1 pointr/Buick

I ordered my own [obd code reader](http://www.Autel.com/ AutoLink AL319 OBD II & CAN Scan Tool https://www.amazon.ca/dp/B007XE8C74/ref=cm_sw_r_cp_apa_i_URbTCbT4J3KBS) and I will let you know the code in a few days!

u/Pr4370r1u5 · 1 pointr/Buick

I converted a tape deck in a '97 Camry to use one of these. Besign BK01 Bluetooth Car Kit. Noise isolator, phone call compatibility, automatic pairing when the car is turned on.

https://www.amazon.com/gp/product/B01MSUWCZ0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1