Best products from r/COents

We found 21 comments on r/COents discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 31 products and ranked them based on the amount of positive reactions they received. Here are the top 20.

7. Boveda for Cigars/Tobacco | 72% RH 2-Way Humidity Control | Size 8 for Use with Up to 5 Cigars | Patented Technology for Cigar Humidors | 10-Count Resealable Bag

    Features:
  • HOW IT WORKS: Our patented two-way containerled Boveda packs compensate the atmosphere inside your container. When water vapor is needed, Boveda releases the cleanest and most purified humidity. When there is too much moisture in your container, Boveda absorbs the excess. With Boveda, you do not have to adjust any valves or figure out if you put in too much or too little water and you will never have to fill or refill your device with water again - ever.
  • RESTORE & MAINTAIN: Boveda is the most effective way to properly age and store at home. Simply place the Boveda packet in your travel, desktop, electronic, or wooden container right on top of your or use our Boveda Holder. If your Boveda is wrapped in a clear overwrap, remove the overwrap before putting Boveda in your container. One of the best benefits of Boveda is that it is maintenance free - all the guesswork has been eliminated.
  • PRECISE container: Automatically restores and maintains humidity in any type of storage—desktop container, cabinet container, travel container, wineadors, coolerdors and tupperdors. You’ll experience a new experience with Boveda-Protected packets. Boveda’s patented formula uses all-natural salt and water to ensure an exact Relative Humidity (RH). Choose from four different RH (65%, 69%, 72% and 75%) and place Boveda in your container or container and close the lid—it’s that easy.
  • 72% RH: Which RH pack do you need? This 72% RH level is for in most wood container, glass top container and non-polymer travel container. Perfect for container bags and travel cases. Protect your from overdrying or mold in your airtight container while you're on the move. Use one (1) Size 8 Boveda for up to 5 TOTAL , a portable container can hold. Example: For a 12- capacity container, use three (3) Size 8 Boveda at once. For bigger container, use Size 60 Boveda.
  • ABOUT US: Boveda devoted the past 23 years to the science of two-way container, we know you will benefit from our commitment to precision. Becoming the global leader in any category does not happen overnight, but Boveda did this and continues to do so since 1997. Today, that persistence looks like millions of two-way container packets getting shipped out each year to protect your finest and tobacco related products.
Boveda for Cigars/Tobacco | 72% RH 2-Way Humidity Control | Size 8 for Use with Up to 5 Cigars | Patented Technology for Cigar Humidors | 10-Count Resealable Bag
▼ Read Reddit mentions

Top comments mentioning products on r/COents:

u/SuperHighRockies · 1 pointr/COents

I'm not sure if [this] (http://www.ebay.com/itm/1-5-ml-Fine-Tip-Plastic-Disposable-Pipettes-/302157969216?hash=item465a04b740:g:UykAAOSwIwJZgj~L) would fit in a cart. There's a trick you can do with plastic pipets to make them even thinner but I'm not sure if juice could still flow through. We have disposable glass ones at work that would perfect if they're long enough. I've never tried them though. I dong hardly use carts anymore though. Only when out snowboarding because my tank leaks like a mo-fo out there :'( It's either from all of my flailing around or the large & repeditive elevation changes.
use a T-18 and just fill it from something like [this] (https://www.amazon.com/TOPWEL-10pcs-Essential-Bottles-Dropper/dp/B016JXW5P4/ref=pd_sbs_194_14?_encoding=UTF8&pd_rd_i=B016JXW5P4&pd_rd_r=R31WXVVD62DPJ3S34XSK&pd_rd_w=knZcQ&pd_rd_wg=sxWL6&refRID=R31WXVVD62DPJ3S34XSK&th=1). I've been mixing 2 grams of live resin with like 3-4 mL of dbmixpro. It stays seems like hanging in the fridge doesn't hurt it any... I always look around a bit to see what's up as far as clones and prices on live resin when I come into Denver. I've bought the LR at Botanico like pretty much every time for a quite a while now. I have a small personal grow though so I'm working on flower quite a bit. I only vape a bit at home, but it's a complete rockstar when I'm out and about and wanna smoke wherever whenever.

u/helpimglued · 1 pointr/COents

I recently stopped buying the prerolled craft Js from the place I have my plants with due to a big price change. I'm a fan of those infused joints (though it seems like they just infuse the paper?) but I have had similar results using the Cone Filler from Raw.

It works like one of those cigarette fillers but it has a tube shaped for a cone. Got it on Amazon with a pack of cones and have put about 150 cones through it since Feb with only a slight learning curve.

I can make them as strong I desire if I "infuse" them myself with a few dots on the outside from a 16 buck Pig and Whistle distillate syringe.

Link to roller:

RAW Classic King Size Pre-Rolled Cones with Filter Tips - Bundle (50 Pack with Cone Filler) https://smile.amazon.com/dp/B071RBNMS2/ref=cm_sw_r_cp_apa_i_9n1OCb40EJ9T8

Edit:. A tip- before you buy a 100 or 800 pack of cones to go with this thing make sure you are buying the correct size, this one is the larger King size roller. They also make a 1 1/4.

u/Black-Throated-Wind · 2 pointsr/COents

No problem.

Dake: wherever you order just make sure it ships free (190 lbs or so ship weight)

Amazon - 312.50 (get prime for a month for free ship)
https://www.amazon.com/Dake-Manual-Utility-Hydraulic-Capacity/dp/B00DWB1MTM/ref=sr_1_1?ie=UTF8&qid=1481040084&sr=8-1&keywords=dake+b-10

Jet.com - there is a 15% coupon code if you search, maxes at 30.00 off 341.00 before coupon so 311.00 ships free

https://jet.com/product/Dake-Corporation-Hydraulic-Press/6c4ceeb24abc4b8aaebcc5d04a8780db

Plates:
Here you have a choice, my advice is go with the best AMERICAN deal. Don't be lured in with import plates...yes they are cheaper but will cause issues down the line (electronics, uneven plates).

710 Snob had a deal a week back....5 x 3 plates with PID/Heaters for 280.00 shipped. They are "seconds" which in all reality means they haven't been polished. I bought a set for a friend (x-mas) and would order another at that price if they had them still. I spent a few minutes polishing one of the plates and it looks great...no need to just cosmetic. I can upload a photo if you want so you can see.

If the 710 snobs aren't on sale your build price will rise by 100 bucks unless you can find plates on sale, which may happen this time of year.

www.azpressco.com

Lowtemp-plates.com

I have used or have friends that have plates from both of those companies and can say nothing but good things about them. Both will run you 380-400 shipped complete.

https://710snob.com/product/black-friday-scratch-dent-rosin-press-plate-3x5-kit/
Just saw they are out of stock, may be worth still reaching out to them to see if they have any at that price.



Aside from that....silicone mat for your plates...temp gun for accuracy (i use a meat thermometer as the guns don't read shiny surfaces) and parchment/bags and your good to go.

You can get the build down to under 300 if you go full cheap chinese import...HF press, import plates. I would not recommend this for safety reasons first...sanity second. HF press is fine to seat a bearing once in a while but for pressing on the regular you will have issues. A thrift store flat iron and an irwin clamp is a better option.

*I have no affiliation with any of these folks.

u/goofyboots710 · 2 pointsr/COents

This is residual oil that doesn't get cleaned out of the banger with a qtip. I'm sure you have noticed it rising when you torch your banger the next time. It rises and pretty much turns to black soot. Peeps call this a chazzed banger. You have to qtip like everyone is saying after every hit. Even then my bowl with chazz over time. There is a product I use to clean my banger every couple of days. The key is to stay on it and don't let it get really black and chazzed. Try using some of this. I got it from my local head shop and it's great. link This is a big bottle. My headshop has smaller, portable ones.

u/UzukiSeed · 1 pointr/COents

Here is an easy way to make your own at home, half the price of the tincture you buy in the store.

First activate the THC in your bud/concentrate by heating it up. You need to decarboxylate it.

Best technique for making tincture as follows

For 1000mg Yield

Heat up 1 Gram of Co2 or BHO hash oil in a small double boiler like this to 220-240 degrees F for ~10 minutes. Use a Thermometer, do not allow it to overheat.

Mix decarboxylated hash oil with 28ml or .9oz of Food Grade Glycerin or Everclear, while slightly warm.

Use a small funnel to put the tincture in a bottle with a 1ml dropper, like [this] (http://www.amazon.com/Amber-Glass-Bottle-Dropper-Dozen/dp/B000AV15PI)

1G=1000mg = 1000mg/29.57ml or 1 fl/oz.

1ml dropper = ~35mg dose.

It is easy as that, if you have any cooking skills this should be a piece of cake.

u/DrDreads420 · 1 pointr/COents

Read this article on curing and storing your buds. (Two important things that it doesn't talk about very much is that (1)They need to be kept in 100% darkness because light degrades THC. (2)The temperature can't fluctuate very much, or your risk of growing mold increases drastically because the humidity in the air in the jar will condensate on the buds, promoting mold growth.) Essentially, you want to keep them in the glass jars at around 60% humidity using these humidity control packets. Some people use humidors, but many people will say the flavor is much better when kept in glass jars vs a humidor. To be honest, you probably don't need a mini-fridge, just keep them in a cool dark place where the temperature doesn't fluctuate too much. The glass jars I linked to are air tight. The ones with the two-part lid (like I linked to) seal better than the one piece lids. Mold should only be a problem if the humidity in the jars stays too high for too long, or your temperature fluctuates rapidly.

u/MeGustaSuVino · 1 pointr/COents

Airscape are the best. I learned about them while working in the coffee industry & the principle for preservation is the same, dry, dark & minimal air left in the container. I use one of these guys and fit my grinder in with my stash, I love it - http://amzn.com/B002UK0WXS

u/otciii · 1 pointr/COents

Yea just make your own. I buy some trim from my dispensary and some coconut oil and some of these little guys from amazon.

http://www.amazon.com/gp/aw/did/B000OSQS4U

And then one of these guys :
http://www.amazon.com/gp/aw/d/B000PBX3GC

and you will be making weed pills to your hearts delight.

u/tatanka01 · 1 pointr/COents

I've done some work with corded barcode readers before. Units like this. They basically plug into a USB port and mimic a keyboard. Scanning a tag (to the computer) is the same as typing the barcode in from a keyboard, so you'd probably need some sort of software or configuration to make it useful for your purpose. There are cheaper versions and from what I recall, most of these will read any standard barcode (and there are like 20 standards).

u/SeanMoore · 1 pointr/COents

Yeah, if you can wait a couple days for delivery then this one from Amazon is the cat's fucking balls:

http://www.amazon.com/gp/product/B005UGBG20/

I bought it to weigh pipes I'm selling and got this one that measures to hundredths of a gram to mix my DIY ejuice. I'm really impressed with it.

The head shop ones are toys in comparison.

u/Dabzilla_710_ · 1 pointr/COents

You could try this

It's what I own and use, although I don't need to keep anything out of sight. It's not a small fridge though. They are pretty good for the price. It's very smell proof, and the whole thing is about as big as a large pasta jar.

u/bombchron · 0 pointsr/COents

That being said, this is the best book ever written in regards to the cultivation of cannabis.

http://www.amazon.com/Marijuana-Botany-Advanced-Propagation-Distinctive/dp/091417178X

u/cosmothekleekai · 2 pointsr/COents

Any recommendation on where to get seeds or clones? Clones seem ideal no? Though this grow tent I’m looking at is 2 in 1 with a separate propagation chamber so there’s room for growing from seed


TopoLite 108"x48"x80" 2-in-1 Indoor Grow Tent Room Propagation and Flower Reflective Mylar Hydroponic Growing Plant Room (108"x48"x80" Lodge Propagation Tent 2-in-1) https://www.amazon.com/dp/B07KFWYQ13/

u/heartbraden · 2 pointsr/COents

This one is pretty cheap and it's reliable once you get it set right:

http://www.amazon.com/dp/B003H4QJAQ/

It's nothing to be afraid of as long as the dial doesn't get bumped! :)

u/SemenInYourStool · 1 pointr/COents

You should definitely roll and smoke a golden joint or blunt...

u/UUDDLRLRBAstard · 0 pointsr/COents

Not really. This is used on food, to sear steaks or caramelize sugars for creme brûlée. With dabs, you aren't just briefly exposing a surface to gas and heat -- you are actively inhaling off of it moments later.

Puretane N-Butane Food-grade Triple Refined 9X Filtered Butane Gas - 12 Cans - Display Case
https://www.amazon.com/dp/B01095MI6O/ref=cm_sw_r_cp_awd_Z809wbGB9YH80

u/chet-rocket-steadman · 2 pointsr/COents

I use these

the only time I’ve had them melt is when I accidentally got some water in the mix and they dissolved on the ends