Best products from r/CZFirearms
We found 30 comments on r/CZFirearms discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 73 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. IMi CZ75 Retention Roto Holster Polymer Paddle Gun Holster for CZ 75 SP-01 Shadow, Tactical, Compact and Tactical Sports
- Polymer Retention Roto Holster with for CZ 75 SP-01 Shadow, CZ75 SP-01 Tactical, CZ75 Compact, CZ75D Compact
- Retention with zero time to disengage
- Rotates 360 degrees for every application (small of back, cross draw)
- Designed for military & police personnel. Great for civilians & off duty officers
- Get 1x mini Punisher PVC Patch for FREE
Features:
2. Bianchi Model 125 Consent Belt Slide Holster Fits Glock 19/23
Open Top Design in Premium Full Grade LeatherSynthetic liner promotes a very quick draw and effortless reholsteringThis unique holster features two modes of carry; inside the waistband or Hi-Ride on the hip (outside the waistband)The Consent also houses a trigger-guard detent for enhanced weapon ret...
3. Dupli-Color ASF0104 Universal Flat Black Exact-Match Scratch Fix All-in-1 Touch-Up Paint - 0.5 oz.
- Abrasive tip removes loose paint and rust
- One Coat Prime and Paint Formula
- Pen tip for fine scratches
- Brush end for larger chips
- Clear coat to seal, protect and ensure a perfect factory matched finish
Features:
4. COMP-TAC.COM International - CZ P-07 Slide Right - Black
Outside the Waist Band Kydex Holster - Made in USAModular Mounting System: Interchangeable Mounts, Adjustable Cant, Adjustable RetentionEach International comes with a mounting option installed and includes all additional mounting options for personal adjustment.Most Optics Capable. Has 1/2" sight c...
5. TRUGLO TFX Pro Tritium and Fiber Optic Xtreme Hangun Sights for CZ Pistols
- Contrasting colored front sight ring for even faster focus
- Quick and accurate U-notch Design
- Angled rear sight edge for emergency one-hand operation
- All features of our popular TFX Handgun sights
- CZ 75 Set Day/Night Sight (Orange)
Features:
6. Hoppe's Elite One Piece Carbon Fiber Cleaning Rod (.22 - .284 Caliber Rifles), 36"
- One piece carbon fiber rod
- Advanced quality for better cleaning
- Ergonomic handle
- Premium double ball bearings
- 36 inch rod for 22 - 284 caliber rifles
Features:
7. Cool Hand G10 Grips for CZ 75 85 Compact, Palm Swell Back Style, Mag Release, OPS Texture,Orange/Black, H6C-G-28
1. CNC machined from G10 phenolic material.2. These grips fit CZ 75 Compact.3. Thin grips: 2/5"(10mm), weight:1.69 OZ(48g).4. Palm Swell Back, give a stable still comfortable grip feeling.5. OPS texture, aggressive. Free screws: 2 screws, 2 o rings, T10 Torx keys included.
8. Multipurpose Grease, XHP 222 SPECIAL, 14.1 oz
- Superb resistance to water washout and spray-off
- Highly adhesive and cohesive structure
- Excellent rust and corrosion resistance
Features:
9. V-Line Slide-Away Security Safe, Semi-Flat Black
- MADE IN THE USA
- CA DOJ Approved
- Pick and pluck foam interior
- Genuine Simplex Lock
- Oversized pullout drawer with ball bearing sliders
- Heavy duty 12 ga. Steel body, face and anti-pry Brackets
Features:
10. Wheeler Engineering Armorer's Handgun Sight Tool with Heavy-Duty Construction and Reversible Assembly for Handguns, Gunsmithing and Maintenance
ACCURACY: Features reference marks for making precise adjustmentsEASE OF USE: Precision machined with a large 4-post drive knob to easily push the sight and can be used to install, uninstall or adjust front and rear dovetail sightsVERSATILITY: Works on all semi-auto pistols and the sight prong is re...
11. Meprolight CZ Tru-Dot Night Sight for P-01. Fixed set
- COMPATBILITY: Compatible with CZ P-01
- GETTING ON TARGET: The MEPRO TRU-DOT fixed Night Sights offer the most reliable illumination for day or night shooting. Premium grade green Tritium vials make your sights visible in lowlight and nighttime conditions. The Tritium vials are surrounded by white reflective material that maximize the intensity and brightness of the tritium source to ensure fast and accurate target acquisition. Both rear and front tritium source appear white during the day and green on lowlight and nighttime.
- ALWAYS ON: Tritium powered, No batteries, No light needed – Always producing light and always ready 24/7/365. Does not need to be charged with a light source unlike Phosphorus. Green tritium dots for both rear and front sights. Maintenance free, can be mounted directly with no modifications.
- HIGH DURABILITY: The MEPRO TRU-DOT sights are drop- and shockproof. Made of steel, they make an excellent upgrade to your pistol and gives you instinctive aiming under pressure. Trusted by law enforcement and military personnel over the world, these tritium Sights are reliable in any lighting or weather condition.
- 12-year guarantee for tritium illumination.
Features:
12. VZ Grips CZ 75 Tactical Diamonds Full Size Gun Grip, Black
- TEXTURE: Very Grippy
- USE: Tactical, Tournament Shooter
- MATERIAL: G10
Features:
13. Black Arch CZ 75D PCR Compact Right-Handed IWB Hybrid Holster with Adjustable Retention, Holsters ACE-1
Genuine Suede - Our Variable Stiffness Backer, or VSB, features a durable leather face, a polymer stiffening insert, and a soft suede backing. This combination creates a sweat proof barrier between your body and the handgun, yet is flexible enough to move with you.Adjustable Retention - With adjustm...
14. NcStar Beretta 92 Pistol Accessory Rail Adapter (MADBER)
For Beretta F92 Handguns With Out Bottom RaillFits Beretta F92/92FSMADBER accessory rail will allow you to add accessories to berretta 92Fs and M9 pistolsRail easily mounts to the trigger guard (no gunsmithing Required)Made of high quality aluminumAllows you to mount your favorite Flashlight or lase...
15. Pachmayr 63220 Renegade Wood Laminate Pistol Grips, CZ 75/85, Rosewood, Checkered
Polished Laminate wood with tasteful checkeringImproves appurtenance and functionAvailable for most popular semi auto modelsCountry of Origin:United States
16. Casio Unisex W-214HC-4AVCF "Classic" Red Resin Watch
Red retro-inspired watch with 1/100 second stop watch, countdown timer, and 12/24 hour formats45 mm resin case with mineral dial windowQuartz movement with digital displayResin band with buckle closureWater resistant to 50 m (165 ft)
17. Howard Leight by Honeywell Impact Sport Sound Amplification Electronic Shooting Earmuff, Classic Green (R-01526)
- Built-in directional microphones amplify range commands and other ambient sounds to a safe 82 dB, providing more natural listening and enhanced communication
- Actively listens and automatically shuts off amplification when ambient sound reaches 82 dB; Noise Reduction Rating (NRR): 22
- Features low profile earcups for firearm stock clearance; adjustable headband for secure fit; compact folding design for convenient storage; classic green color
- Includes AUX input and 3.5 mm connection cord for MP3 players and scanners. Integrated power/volume knob
- Includes 2 AAA batteries; automatic shut-off feature after 4 hours increases battery life; approximately 350 hours of battery life; works well and long with Polaroid AAA Batteries
Features:
18. Olight PL-Mini Valkyrie 400 Lumens Magnetic USB Rechargeable Tactical Flashlight,Powered by a Built-in Polymer Battery Accessory(Black)
Compact and lightweight, width and length perfect for compact pistols making it easily concealable.Incorporates the OLIGHT signature magnetic charging system for maximum convenience. Can be powered by all common USB power sources.260mAh built-in polymer battery pushing a maximum output of 400 lumens...
19. Cool Hand G10 Grips for CZ 75 SP-01 Shadow, Snake Scale Texture, Brand Grey/Black
1.CNC machined from Non slippery material - G10.2. Thickness: 1/4''. Weight: 1.6 OZ(45.8g).3. These grips fit CZ 75 SP-01/ Full Size/Shadow 2.4. Snake scale texture, aggressive.5. Free Screws for CZ: 2 screws, 2 O rings, T10 Torx keys included.
20. Sight Pusher Tool by Sight Master | Install Or Adjust Sights On Most Handguns | Modify Sights Yourself | Made in the USA | T1003
It's fully adjustable to accommodate most modern handguns, both front and rear sights.Please Note: This Sight Pusher tool may not be compatible with certain Ghost Ring style sights, or other "Extra Tall" sights.The new Sight Master Sight Pusher Tool is beefier and more robust than any Sight Tool on ...
I use high temp grease like you'd use in a grease gun to lube bearings, the particular brand is "Mobil grease xhp 222" but any decent grease should work. here's a link to the stuff I use, that lil mini grease gun thing the show in the recommended items is super fucking handy too.
https://www.amazon.com/Multipurpose-Grease-XHP-SPECIAL-14-1/dp/B009VGEEM4
But I kinda go overboard and grease all possible contact points, like where the trigger bars ride against the frame, and I'll put a dab on the rear cage then smush it in with my finger so it can get worked into all the surfaces there and slicked everything up. Basically if any 2 pieces of metal are gonna touch I like them to be greased, the firing pin gets a tiny amount of oil, like 2 drops at most, and then I cycle the gun by hand a bunch and wipe up any excess.
Some q-tips and toothpicks make applying it a lot easier, that lil grease gun is a God send though, I highly recommend it.
And yeah the best part of the comp is how bad ass it looks, my brother was flipping out like "this shit looks like something out of metal gear" lol
This is what I use for a P-09 Suppressor Ready with that same light. Fits with plenty of extra space for mags.
It was less expensive when I bought it but I also liked that it fits perfectly in my nightstand, like it was custom fit. Just got lucky I guess.
Otherwise I like that it's mechanical, no electronic parts that could fail or batteries that could die.
I'm also a fan of the Vaultek biometric safes, but none of those would fit in my nightstand when I was looking to make my original purchase.
Good luck!
V-Line Slide-Away Security Safe, Semi-Flat Black https://www.amazon.com/dp/B0100WUX6I/ref=cm_sw_r_cp_apa_i_NxvRCbF80MNNB
For those of you looking for a holster for your suppressor-ready CZs, be sure to check out Eclipse Holsters.
I had been looking for a OWB holster for my P07 for a little while, without finding much that I liked. I wanted another Bravo Concealment BCA like what I use with my G19, but it seems Bravo recently cut down the variety of models they support to instead focus on quick shipment.
Following that disappointment, I tried going to the experts in CZs at CZ Custom, where I ordered a Blade-Tech Eclipse. Unfortunately, this holster did not have enough clearance for the suppressor-height front sight, and had to be returned.
Next stop was Comp-Tac with the “CZ P-07 Slide” version of their International holster. Overall, this one really is a great deal - includes belt loops, paddle and drop/offset attachments, allowing quite a bit of versatility for IDPA or IPSC/USPSA usage. However, it just wasn’t the Kydex pancake style I really wanted.
While searching around for other Kydex holster makers, one of the top Google results was Eclipse Holsters. Their models included the P07, but no options for suppressor-height sights or a threaded/extended barrel. Determined, I submitted a message via their contact form asking about customizing their OWB holster for my P07, and received a quick response:
> Name: Knots
> Email: nautical@loldoxxed.com
> Subject: Holster for CZ P07 Suppressor Ready
> Comments: Would it be possible to get a OWB kydex holster made for a CZ P07 suppressor-ready model, with a .340" tall front sight and .640" O.D. X .720" long extended barrel? I am fine with either an open or closed-muzzle design.
> Yes. Put all this information into the notes section at checkout
> Joseph
I immediately hop back on their website, add the holster to my cart, and enter my comments during checkout as follows:
> Customizations for holster: – 10 degree forward cant – Clearance for .340″ tall front sight – Open muzzle end if possible, otherwise clearance for 640″ O.D. X .720″ long extended barrel
Three weeks later, it’s here!
http://imgur.com/a/AttzI
I have to say I am very happy with the quality of this holster - fantastic retention (satisfying snap and literally zero wiggle when holstered,) great fit and finish, and of course built right to my specs I included with my order.
Disclaimer - Aside from being a one-time customer, I am entirely unaffiliated with Eclipse Holsters. I would, however, be more than happy to purchase from them again.
I did! I have the wheeler sight pusher vise and haven’t paid someone to do sights since I got it (on FNs, Sig, Glock, and now CZ). I wouldn’t want to try it without the vise but not a problem with it at all. Couple things to remember, with the front sight you have to drift out the roll pin holding it in a certain direction (I believe it’s right to left but honestly not 100% sure). The front sight sides may need lightly sanded to fit using no higher than 200 grit and equally on each side according to some people. Mine went straight in with zero play and no issues. Also make sure you put the roll pin back as it’s also what holds the barrel bushing in place. Apparently some people forget that step and it leads to tactical disassembly.
Here’s the link to the vise. Definitely worth the purchase imo if you plan on doing more than one or really want to do it yourself (also truglo voids the warranty if you use a hammer)! If you use it, biggest suggestion I have is to put painters tape on the sides of the slide that the vise contacts with to save your finish
Wheeler Engineering Armorer's Handgun Sight Tool with Heavy-Duty Construction and Reversible Assembly for Handguns, Gunsmithing and Maintenance https://www.amazon.com/dp/B01B3NU0U2/ref=cm_sw_r_cp_api_i_qOi7CbGRK19XR
Don’t rat me out but I moved my SP-01 tactical sights over to my P-01 . The ledge it provides plus trot vials makes it super easy to rack the slide off of clothes or just my off-hand index finger.
https://www.amazon.com/Meprolight-Tru-Dot-Night-Sight-P-01/dp/B00555BAT0/ref=sr_1_2?ie=UTF8&qid=1450826016&sr=8-2&keywords=meprolight+cz75
Should fit your PCR perfectly.
Nice piece! I have the SP-01 Standard model and absolutely love it. I too wanted thinner grips and got these:
https://www.amazon.com/gp/product/B005ZENOBS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Other than having to sand/file the sharp top edges of the grips I'm happy with them.
If you want to do an inexpensive yet effective trigger job, check out Cajun Gun Works' SPGK1 3 Piece Spring Kit. It's only $17 but will essentially reduce your DA & SA trigger pull weight by half. That combined with an 11 lb recoil spring will make your great pistol a fantastic shooter.
Congrats on your new score. It's such a great gun.
I'd suggest the SHTF Gear ACE-1 IWB holster. I love mine - especially after the initial two week break in period. Great quality and comfort as well as a life time warranty and free belt clips for life. It spreads the load out really well and has adjustable cant and full access to the grip. http://www.amazon.com/Compact-Hybrid-Holster-SHTF-Gear/dp/B008P6Y6C4?tag=amaz98-20Just saw that you ordered an Alien Gear holster.I'd also recommend the CZ Custom aluminum checkered grips - I just got mine installed and couldn't be happier with them. They are grippy enough to keep your sweaty hands from slipping while shooting but don't snag on clothing or rub your skin raw if you are ccw and aren't wearing an undershirt. They are a lot thinner than the factory rubber grips and seem to allow my trigger finger a better reach and purchase on the trigger. http://czcustom.com/czgripsalcompactblackjaro.aspx The only thing that I don't like about them is the screws that comes with them aren't black and the original black screw for the rubber grips are too long for the thin aluminum.
Very nice sales pitch for the Tactical Sports.
Did some Googling around for ways to add a rail and actually found a response from CZ Customs: https://www.amazon.com/NcStar-Beretta-Accessory-Adapter-MADBER/dp/B0058DC520/ref=pd_sim_sg_3?tag=viglink128630-20
Very interesting. Would need to get a custom holster made for when I shoot the night shoots, but that's a problem for another day.
That makes me quite happy as I could go down the route of the Tactical Sports and might just end up getting this sucker: https://czcustom.com/new-firearms/cz-pistols-custom/cz-75-cts-ls-sao-9mm-black.html
Which means less tweaking and work for me - which is awesome.
Thanks for the info, forced me to do more research. I'll probably be happier with this route.
I've got the CZ branded cocobolo ones that I really love. Pachmayr has also started making some laminate grips that look pretty nice for the price.
If money's no object I'd go w/ the Nils personally, they always look super classy.
Sure thing!
CZ P-07 (obviously) with 5 magazines
The Wilderness Frequent Flyer Belt 5-stitch 1-1/2" (looks a bit more casual than the usual instructor belt people wear, plus it's a bit cheaper)
Bladetech IDPA Competition Shooters Pack(Pretty good deal for a holster and mag pouch. I own a Bladetech Nano as well sometimes substitute that if I feel like practicing IWB. Most of Bladetech's products are available for CZ's, which is a nice change from other companies who tend to ignore them)
Howard Leight Impact Sport Electronic earpro(Almost everyone wears these, basically the standard)
Columbia Royce Peak Cargo Pants(Most comfortable pants I've ever owned. I use them for both work and shooting)
Casio W-214HC-4AVCF(You probably don't care, just being thorough!)
I got one of these https://www.vedderholsters.com/lightdraw/ but while I was waiting for it I used one of these which could be found locally https://www.amazon.com/Bianchi-Model-Consent-Slide-Holster/dp/B00S0ZHOUQ, it fit the gun surprisingly well. I suppose if you have local shops you could test fit a couple leather glock 19 holsters they're pretty dang close and abundant.
I picked up a cheap but fairly nice holster for my SP-01 to use at the range.
https://www.amazon.com/dp/B00LYYG5K0/ref=cm_sw_r_other_apa_i_Zd4-AbHT8H9QQ
Haven't gone to the range with it yet nor ever used a holster before since this is my first pistol,but it feels pretty good with some dry draws.
Thanks!
I added these grips (I've always been a fan of aggressive, G-10 grips) and I added these sights (I've put them on nearly every pistol I've owned, pretty much everything that isn't a Sig with factory night-sights).
Oh, and this light which I've also got on my Walther PPQ M2. The light has a Glock and non-Glock option; the Glock option fits the pistol perfectly.
I feel your pain. Bought a P01 from Cajun, had them do all the work i wanted done, waited what seemed like forever for it. First day I had it, I was adjusting and getting frustrated with the new holster I bought for it and inadvertently put the wrong screws into the belt clip. Holster feels comfortable so I shove the pistol in and hear the most sickening scraping sound. Right down to bare metal. I tried this stuff:
https://smile.amazon.com/gp/product/B00HE68ESI/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
I'm no painter, and i couldn’t make it look worth a damn, but the color is a pretty good match. Good luck.
Some are but mine is pretty generic. I’m a lot more comfortable with it than with hammers & punches.
I bought this one based on reviews
https://www.amazon.com/gp/aw/d/B00BD65Y4C
I use this one: https://www.amazon.com/Hoppes-Elite-Piece-Carbon-Cleaning/dp/B01B496H70/ref=sr_1_3?keywords=carbon+fiber+cleaning+rod&qid=1565757760&s=gateway&sr=8-3
There are probably better ones out there, but I use it for everything from my .22 to my M1 Garand.
Edit: Forgot to add: it's more expensive and harder to store than a sectioned rod, but with care it will last as long as your firearms do.
I got the IMi Retention Holster from Amazon and then added the belt clip instead of the paddle. Holds my SP-01 and P-01 perfectly. I normally carry IWB with a Vedder Light Tuck, but for OWB this has worked well for me.